arch/arm/boot/dts/r8a7793-gose.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for the Gose board
   4  *
   5  * Copyright (C) 2014-2015 Renesas Electronics Corporation
   6  */
   7
   8 /*
   9  * SSI-AK4643
  10  *
  11  * SW1: 1: AK4643
  12  *      2: CN22
  13  *      3: ADV7511
  14  *
  15  * This command is required when Playback/Capture
  16  *
  17  *      amixer set "LINEOUT Mixer DACL" on
  18  *      amixer set "DVC Out" 100%
  19  *      amixer set "DVC In" 100%
  20  *
  21  * You can use Mute
  22  *
  23  *      amixer set "DVC Out Mute" on
  24  *      amixer set "DVC In Mute" on
  25  *
  26  * You can use Volume Ramp
  27  *
  28  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  29  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  30  *      amixer set "DVC Out Ramp" on
  31  *      aplay xxx.wav &
  32  *      amixer set "DVC Out"  80%  // Volume Down
  33  *      amixer set "DVC Out" 100%  // Volume Up
  34  */
  35
  36 /dts-v1/;
  37 #include "r8a7793.dtsi"
  38 #include <dt-bindings/gpio/gpio.h>
  39 #include <dt-bindings/input/input.h>
  40
  41 / {
  42         model = "Gose";
  43         compatible = "renesas,gose", "renesas,r8a7793";
  44
  45         aliases {
  46                 serial0 = &scif0;
  47                 serial1 = &scif1;
  48                 i2c9 = &gpioi2c2;
  49                 i2c10 = &gpioi2c4;
  50                 i2c11 = &i2chdmi;
  51                 i2c12 = &i2cexio4;
  52                 mmc0 = &sdhi0;
  53                 mmc1 = &sdhi1;
  54                 mmc2 = &sdhi2;
  55         };
  56
  57         chosen {
  58                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
  59                 stdout-path = "serial0:115200n8";
  60         };
  61
  62         memory@40000000 {
  63                 device_type = "memory";
  64                 reg = <0 0x40000000 0 0x40000000>;
  65         };
  66
  67         gpio-keys {
  68                 compatible = "gpio-keys";
  69
  70                 key-1 {
  71                         gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
  72                         linux,code = <KEY_1>;
  73                         label = "SW2-1";
  74                         wakeup-source;
  75                         debounce-interval = <20>;
  76                 };
  77                 key-2 {
  78                         gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
  79                         linux,code = <KEY_2>;
  80                         label = "SW2-2";
  81                         wakeup-source;
  82                         debounce-interval = <20>;
  83                 };
  84                 key-3 {
  85                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
  86                         linux,code = <KEY_3>;
  87                         label = "SW2-3";
  88                         wakeup-source;
  89                         debounce-interval = <20>;
  90                 };
  91                 key-4 {
  92                         gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
  93                         linux,code = <KEY_4>;
  94                         label = "SW2-4";
  95                         wakeup-source;
  96                         debounce-interval = <20>;
  97                 };
  98                 key-a {
  99                         gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 100                         linux,code = <KEY_A>;
 101                         label = "SW30";
 102                         wakeup-source;
 103                         debounce-interval = <20>;
 104                 };
 105                 key-b {
 106                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 107                         linux,code = <KEY_B>;
 108                         label = "SW31";
 109                         wakeup-source;
 110                         debounce-interval = <20>;
 111                 };
 112                 key-c {
 113                         gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 114                         linux,code = <KEY_C>;
 115                         label = "SW32";
 116                         wakeup-source;
 117                         debounce-interval = <20>;
 118                 };
 119                 key-d {
 120                         gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 121                         linux,code = <KEY_D>;
 122                         label = "SW33";
 123                         wakeup-source;
 124                         debounce-interval = <20>;
 125                 };
 126                 key-e {
 127                         gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
 128                         linux,code = <KEY_E>;
 129                         label = "SW34";
 130                         wakeup-source;
 131                         debounce-interval = <20>;
 132                 };
 133                 key-f {
 134                         gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
 135                         linux,code = <KEY_F>;
 136                         label = "SW35";
 137                         wakeup-source;
 138                         debounce-interval = <20>;
 139                 };
 140                 key-g {
 141                         gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 142                         linux,code = <KEY_G>;
 143                         label = "SW36";
 144                         wakeup-source;
 145                         debounce-interval = <20>;
 146                 };
 147         };
 148
 149         leds {
 150                 compatible = "gpio-leds";
 151                 led6 {
 152                         gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 153                         label = "LED6";
 154                 };
 155                 led7 {
 156                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 157                         label = "LED7";
 158                 };
 159                 led8 {
 160                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 161                         label = "LED8";
 162                 };
 163         };
 164
 165         vcc_sdhi0: regulator-vcc-sdhi0 {
 166                 compatible = "regulator-fixed";
 167
 168                 regulator-name = "SDHI0 Vcc";
 169                 regulator-min-microvolt = <3300000>;
 170                 regulator-max-microvolt = <3300000>;
 171
 172                 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
 173                 enable-active-high;
 174         };
 175
 176         vccq_sdhi0: regulator-vccq-sdhi0 {
 177                 compatible = "regulator-gpio";
 178
 179                 regulator-name = "SDHI0 VccQ";
 180                 regulator-min-microvolt = <1800000>;
 181                 regulator-max-microvolt = <3300000>;
 182
 183                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 184                 gpios-states = <1>;
 185                 states = <3300000 1>, <1800000 0>;
 186         };
 187
 188         vcc_sdhi1: regulator-vcc-sdhi1 {
 189                 compatible = "regulator-fixed";
 190
 191                 regulator-name = "SDHI1 Vcc";
 192                 regulator-min-microvolt = <3300000>;
 193                 regulator-max-microvolt = <3300000>;
 194
 195                 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
 196                 enable-active-high;
 197         };
 198
 199         vccq_sdhi1: regulator-vccq-sdhi1 {
 200                 compatible = "regulator-gpio";
 201
 202                 regulator-name = "SDHI1 VccQ";
 203                 regulator-min-microvolt = <1800000>;
 204                 regulator-max-microvolt = <3300000>;
 205
 206                 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 207                 gpios-states = <1>;
 208                 states = <3300000 1>, <1800000 0>;
 209         };
 210
 211         vcc_sdhi2: regulator-vcc-sdhi2 {
 212                 compatible = "regulator-fixed";
 213
 214                 regulator-name = "SDHI2 Vcc";
 215                 regulator-min-microvolt = <3300000>;
 216                 regulator-max-microvolt = <3300000>;
 217
 218                 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
 219                 enable-active-high;
 220         };
 221
 222         vccq_sdhi2: regulator-vccq-sdhi2 {
 223                 compatible = "regulator-gpio";
 224
 225                 regulator-name = "SDHI2 VccQ";
 226                 regulator-min-microvolt = <1800000>;
 227                 regulator-max-microvolt = <3300000>;
 228
 229                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 230                 gpios-states = <1>;
 231                 states = <3300000 1>, <1800000 0>;
 232         };
 233
 234         audio_clock: audio_clock {
 235                 compatible = "fixed-clock";
 236                 #clock-cells = <0>;
 237                 clock-frequency = <11289600>;
 238         };
 239
 240         rsnd_ak4643: sound {
 241                 compatible = "simple-audio-card";
 242
 243                 simple-audio-card,format = "left_j";
 244                 simple-audio-card,bitclock-master = <&sndcodec>;
 245                 simple-audio-card,frame-master = <&sndcodec>;
 246
 247                 sndcpu: simple-audio-card,cpu {
 248                         sound-dai = <&rcar_sound>;
 249                 };
 250
 251                 sndcodec: simple-audio-card,codec {
 252                         sound-dai = <&ak4643>;
 253                         clocks = <&audio_clock>;
 254                 };
 255         };
 256
 257         hdmi-in {
 258                 compatible = "hdmi-connector";
 259                 type = "a";
 260
 261                 port {
 262                         hdmi_con_in: endpoint {
 263                                 remote-endpoint = <&adv7612_in>;
 264                         };
 265                 };
 266         };
 267
 268         hdmi-out {
 269                 compatible = "hdmi-connector";
 270                 type = "a";
 271
 272                 port {
 273                         hdmi_con_out: endpoint {
 274                                 remote-endpoint = <&adv7511_out>;
 275                         };
 276                 };
 277         };
 278
 279         composite-in {
 280                 compatible = "composite-video-connector";
 281
 282                 port {
 283                         composite_con_in: endpoint {
 284                                 remote-endpoint = <&adv7180_in>;
 285                         };
 286                 };
 287         };
 288
 289         x2_clk: x2-clock {
 290                 compatible = "fixed-clock";
 291                 #clock-cells = <0>;
 292                 clock-frequency = <74250000>;
 293         };
 294
 295         x13_clk: x13-clock {
 296                 compatible = "fixed-clock";
 297                 #clock-cells = <0>;
 298                 clock-frequency = <148500000>;
 299         };
 300
 301         gpioi2c2: i2c-9 {
 302                 #address-cells = <1>;
 303                 #size-cells = <0>;
 304                 compatible = "i2c-gpio";
 305                 status = "disabled";
 306                 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 307                 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 308                 i2c-gpio,delay-us = <5>;
 309         };
 310
 311         gpioi2c4: i2c-10 {
 312                 #address-cells = <1>;
 313                 #size-cells = <0>;
 314                 compatible = "i2c-gpio";
 315                 status = "disabled";
 316                 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 317                 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 318                 i2c-gpio,delay-us = <5>;
 319         };
 320
 321         /*
 322          * A fallback to GPIO is provided for I2C2.
 323          */
 324         i2chdmi: i2c-11 {
 325                 compatible = "i2c-demux-pinctrl";
 326                 i2c-parent = <&i2c2>, <&gpioi2c2>;
 327                 i2c-bus-name = "i2c-hdmi";
 328                 #address-cells = <1>;
 329                 #size-cells = <0>;
 330
 331                 ak4643: codec@12 {
 332                         compatible = "asahi-kasei,ak4643";
 333                         #sound-dai-cells = <0>;
 334                         reg = <0x12>;
 335                 };
 336
 337                 composite-in@20 {
 338                         compatible = "adi,adv7180cp";
 339                         reg = <0x20>;
 340
 341                         ports {
 342                                 #address-cells = <1>;
 343                                 #size-cells = <0>;
 344
 345                                 port@0 {
 346                                         reg = <0>;
 347                                         adv7180_in: endpoint {
 348                                                 remote-endpoint = <&composite_con_in>;
 349                                         };
 350                                 };
 351
 352                                 port@3 {
 353                                         reg = <3>;
 354                                         adv7180_out: endpoint {
 355                                                 bus-width = <8>;
 356                                                 remote-endpoint = <&vin1ep>;
 357                                         };
 358                                 };
 359                         };
 360                 };
 361
 362                 hdmi@39 {
 363                         compatible = "adi,adv7511w";
 364                         reg = <0x39>;
 365                         interrupt-parent = <&gpio3>;
 366                         interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 367
 368                         adi,input-depth = <8>;
 369                         adi,input-colorspace = "rgb";
 370                         adi,input-clock = "1x";
 371
 372                         ports {
 373                                 #address-cells = <1>;
 374                                 #size-cells = <0>;
 375
 376                                 port@0 {
 377                                         reg = <0>;
 378                                         adv7511_in: endpoint {
 379                                                 remote-endpoint = <&du_out_rgb>;
 380                                         };
 381                                 };
 382
 383                                 port@1 {
 384                                         reg = <1>;
 385                                         adv7511_out: endpoint {
 386                                                 remote-endpoint = <&hdmi_con_out>;
 387                                         };
 388                                 };
 389                         };
 390                 };
 391
 392                 hdmi-in@4c {
 393                         compatible = "adi,adv7612";
 394                         reg = <0x4c>;
 395                         interrupt-parent = <&gpio4>;
 396                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 397                         default-input = <0>;
 398
 399                         ports {
 400                                 #address-cells = <1>;
 401                                 #size-cells = <0>;
 402
 403                                 port@0 {
 404                                         reg = <0>;
 405                                         adv7612_in: endpoint {
 406                                                 remote-endpoint = <&hdmi_con_in>;
 407                                         };
 408                                 };
 409
 410                                 port@2 {
 411                                         reg = <2>;
 412                                         adv7612_out: endpoint {
 413                                                 remote-endpoint = <&vin0ep2>;
 414                                         };
 415                                 };
 416                         };
 417                 };
 418
 419                 eeprom@50 {
 420                         compatible = "renesas,r1ex24002", "atmel,24c02";
 421                         reg = <0x50>;
 422                         pagesize = <16>;
 423                 };
 424         };
 425
 426         /*
 427          * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 428          * A fallback to GPIO is provided.
 429          */
 430         i2cexio4: i2c-12 {
 431                 compatible = "i2c-demux-pinctrl";
 432                 i2c-parent = <&i2c4>, <&gpioi2c4>;
 433                 i2c-bus-name = "i2c-exio4";
 434                 #address-cells = <1>;
 435                 #size-cells = <0>;
 436         };
 437 };
 438
 439 &du {
 440         pinctrl-0 = <&du_pins>;
 441         pinctrl-names = "default";
 442         status = "okay";
 443
 444         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 445                  <&x13_clk>, <&x2_clk>;
 446         clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
 447
 448         ports {
 449                 port@0 {
 450                         endpoint {
 451                                 remote-endpoint = <&adv7511_in>;
 452                         };
 453                 };
 454         };
 455 };
 456
 457 &lvds0 {
 458         ports {
 459                 port@1 {
 460                         lvds_connector: endpoint {
 461                         };
 462                 };
 463         };
 464 };
 465
 466 &extal_clk {
 467         clock-frequency = <20000000>;
 468 };
 469
 470 &pfc {
 471         pinctrl-0 = <&scif_clk_pins>;
 472         pinctrl-names = "default";
 473
 474         i2c2_pins: i2c2 {
 475                 groups = "i2c2";
 476                 function = "i2c2";
 477         };
 478
 479         i2c4_pins: i2c4 {
 480                 groups = "i2c4_c";
 481                 function = "i2c4";
 482         };
 483
 484         du_pins: du {
 485                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 486                 function = "du";
 487         };
 488
 489         scif0_pins: scif0 {
 490                 groups = "scif0_data_d";
 491                 function = "scif0";
 492         };
 493
 494         scif1_pins: scif1 {
 495                 groups = "scif1_data_d";
 496                 function = "scif1";
 497         };
 498
 499         scif_clk_pins: scif_clk {
 500                 groups = "scif_clk";
 501                 function = "scif_clk";
 502         };
 503
 504         ether_pins: ether {
 505                 groups = "eth_link", "eth_mdio", "eth_rmii";
 506                 function = "eth";
 507         };
 508
 509         phy1_pins: phy1 {
 510                 groups = "intc_irq0";
 511                 function = "intc";
 512         };
 513
 514         pmic_irq_pins: pmicirq {
 515                 groups = "intc_irq2";
 516                 function = "intc";
 517         };
 518
 519         sdhi0_pins: sd0 {
 520                 groups = "sdhi0_data4", "sdhi0_ctrl";
 521                 function = "sdhi0";
 522                 power-source = <3300>;
 523         };
 524
 525         sdhi0_pins_uhs: sd0_uhs {
 526                 groups = "sdhi0_data4", "sdhi0_ctrl";
 527                 function = "sdhi0";
 528                 power-source = <1800>;
 529         };
 530
 531         sdhi1_pins: sd1 {
 532                 groups = "sdhi1_data4", "sdhi1_ctrl";
 533                 function = "sdhi1";
 534                 power-source = <3300>;
 535         };
 536
 537         sdhi1_pins_uhs: sd1_uhs {
 538                 groups = "sdhi1_data4", "sdhi1_ctrl";
 539                 function = "sdhi1";
 540                 power-source = <1800>;
 541         };
 542
 543         sdhi2_pins: sd2 {
 544                 groups = "sdhi2_data4", "sdhi2_ctrl";
 545                 function = "sdhi2";
 546                 power-source = <3300>;
 547         };
 548
 549         sdhi2_pins_uhs: sd2_uhs {
 550                 groups = "sdhi2_data4", "sdhi2_ctrl";
 551                 function = "sdhi2";
 552                 power-source = <1800>;
 553         };
 554
 555         qspi_pins: qspi {
 556                 groups = "qspi_ctrl", "qspi_data4";
 557                 function = "qspi";
 558         };
 559
 560         sound_pins: sound {
 561                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 562                 function = "ssi";
 563         };
 564
 565         sound_clk_pins: sound_clk {
 566                 groups = "audio_clk_a";
 567                 function = "audio_clk";
 568         };
 569
 570         vin0_pins: vin0 {
 571                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 572                 function = "vin0";
 573         };
 574
 575         vin1_pins: vin1 {
 576                 groups = "vin1_data8", "vin1_clk";
 577                 function = "vin1";
 578         };
 579 };
 580
 581 &ether {
 582         pinctrl-0 = <&ether_pins>, <&phy1_pins>;
 583         pinctrl-names = "default";
 584
 585         phy-handle = <&phy1>;
 586         renesas,ether-link-active-low;
 587         status = "okay";
 588
 589         phy1: ethernet-phy@1 {
 590                 reg = <1>;
 591                 interrupt-parent = <&irqc0>;
 592                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 593                 micrel,led-mode = <1>;
 594                 reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 595         };
 596 };
 597
 598 &cmt0 {
 599         status = "okay";
 600 };
 601
 602 &cpu0 {
 603         cpu0-supply = <&vdd_dvfs>;
 604 };
 605
 606 &rwdt {
 607         timeout-sec = <60>;
 608         status = "okay";
 609 };
 610
 611 &scif0 {
 612         pinctrl-0 = <&scif0_pins>;
 613         pinctrl-names = "default";
 614
 615         status = "okay";
 616 };
 617
 618 &scif1 {
 619         pinctrl-0 = <&scif1_pins>;
 620         pinctrl-names = "default";
 621
 622         status = "okay";
 623 };
 624
 625 &scif_clk {
 626         clock-frequency = <14745600>;
 627 };
 628
 629 &sdhi0 {
 630         pinctrl-0 = <&sdhi0_pins>;
 631         pinctrl-1 = <&sdhi0_pins_uhs>;
 632         pinctrl-names = "default", "state_uhs";
 633
 634         vmmc-supply = <&vcc_sdhi0>;
 635         vqmmc-supply = <&vccq_sdhi0>;
 636         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 637         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 638         sd-uhs-sdr50;
 639         sd-uhs-sdr104;
 640         status = "okay";
 641 };
 642
 643 &sdhi1 {
 644         pinctrl-0 = <&sdhi1_pins>;
 645         pinctrl-1 = <&sdhi1_pins_uhs>;
 646         pinctrl-names = "default", "state_uhs";
 647
 648         vmmc-supply = <&vcc_sdhi1>;
 649         vqmmc-supply = <&vccq_sdhi1>;
 650         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 651         wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 652         sd-uhs-sdr50;
 653         status = "okay";
 654 };
 655
 656 &sdhi2 {
 657         pinctrl-0 = <&sdhi2_pins>;
 658         pinctrl-1 = <&sdhi2_pins_uhs>;
 659         pinctrl-names = "default", "state_uhs";
 660
 661         vmmc-supply = <&vcc_sdhi2>;
 662         vqmmc-supply = <&vccq_sdhi2>;
 663         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
 664         sd-uhs-sdr50;
 665         status = "okay";
 666 };
 667
 668 &qspi {
 669         pinctrl-0 = <&qspi_pins>;
 670         pinctrl-names = "default";
 671
 672         status = "okay";
 673
 674         flash@0 {
 675                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 676                 reg = <0>;
 677                 spi-max-frequency = <30000000>;
 678                 spi-tx-bus-width = <4>;
 679                 spi-rx-bus-width = <4>;
 680                 spi-cpol;
 681                 spi-cpha;
 682                 m25p,fast-read;
 683
 684                 partitions {
 685                         compatible = "fixed-partitions";
 686                         #address-cells = <1>;
 687                         #size-cells = <1>;
 688
 689                         partition@0 {
 690                                 label = "loader";
 691                                 reg = <0x00000000 0x00040000>;
 692                                 read-only;
 693                         };
 694                         partition@40000 {
 695                                 label = "user";
 696                                 reg = <0x00040000 0x00400000>;
 697                                 read-only;
 698                         };
 699                         partition@440000 {
 700                                 label = "flash";
 701                                 reg = <0x00440000 0x03bc0000>;
 702                         };
 703                 };
 704         };
 705 };
 706
 707 &i2c2 {
 708         pinctrl-0 = <&i2c2_pins>;
 709         pinctrl-names = "i2c-hdmi";
 710
 711         status = "okay";
 712         clock-frequency = <100000>;
 713
 714 };
 715
 716 &i2c6 {
 717         pinctrl-names = "default";
 718         pinctrl-0 = <&pmic_irq_pins>;
 719         status = "okay";
 720         clock-frequency = <100000>;
 721
 722         pmic@58 {
 723                 compatible = "dlg,da9063";
 724                 reg = <0x58>;
 725                 interrupt-parent = <&irqc0>;
 726                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 727                 interrupt-controller;
 728
 729                 rtc {
 730                         compatible = "dlg,da9063-rtc";
 731                 };
 732
 733                 wdt {
 734                         compatible = "dlg,da9063-watchdog";
 735                 };
 736         };
 737
 738         vdd_dvfs: regulator@68 {
 739                 compatible = "dlg,da9210";
 740                 reg = <0x68>;
 741                 interrupt-parent = <&irqc0>;
 742                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 743
 744                 regulator-min-microvolt = <1000000>;
 745                 regulator-max-microvolt = <1000000>;
 746                 regulator-boot-on;
 747                 regulator-always-on;
 748         };
 749 };
 750
 751 &i2c4 {
 752         pinctrl-0 = <&i2c4_pins>;
 753         pinctrl-names = "i2c-exio4";
 754 };
 755
 756 &rcar_sound {
 757         pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
 758         pinctrl-names = "default";
 759
 760         /* Single DAI */
 761         #sound-dai-cells = <0>;
 762
 763         status = "okay";
 764
 765         rcar_sound,dai {
 766                 dai0 {
 767                         playback = <&ssi0>, <&src2>, <&dvc0>;
 768                         capture  = <&ssi1>, <&src3>, <&dvc1>;
 769                 };
 770         };
 771 };
 772
 773 &ssi1 {
 774         shared-pin;
 775 };
 776
 777 /* HDMI video input */
 778 &vin0 {
 779         status = "okay";
 780         pinctrl-0 = <&vin0_pins>;
 781         pinctrl-names = "default";
 782
 783         port {
 784                 vin0ep2: endpoint {
 785                         remote-endpoint = <&adv7612_out>;
 786                         bus-width = <24>;
 787                         hsync-active = <0>;
 788                         vsync-active = <0>;
 789                         pclk-sample = <1>;
 790                         data-active = <1>;
 791                 };
 792         };
 793 };
 794
 795 /* composite video input */
 796 &vin1 {
 797         pinctrl-0 = <&vin1_pins>;
 798         pinctrl-names = "default";
 799
 800         status = "okay";
 801
 802         port {
 803                 vin1ep: endpoint {
 804                         remote-endpoint = <&adv7180_out>;
 805                         bus-width = <8>;
 806                 };
 807         };
 808 };