arch/arm/boot/dts/r8a7791-koelsch.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for the Koelsch board
   4  *
   5  * Copyright (C) 2013 Renesas Electronics Corporation
   6  * Copyright (C) 2013-2014 Renesas Solutions Corp.
   7  * Copyright (C) 2014 Cogent Embedded, Inc.
   8  */
   9
  10 /*
  11  * SSI-AK4643
  12  *
  13  * SW1: 1: AK4643
  14  *      2: CN22
  15  *      3: ADV7511
  16  *
  17  * This command is required when Playback/Capture
  18  *
  19  *      amixer set "LINEOUT Mixer DACL" on
  20  *      amixer set "DVC Out" 100%
  21  *      amixer set "DVC In" 100%
  22  *
  23  * You can use Mute
  24  *
  25  *      amixer set "DVC Out Mute" on
  26  *      amixer set "DVC In Mute" on
  27  *
  28  * You can use Volume Ramp
  29  *
  30  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  31  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  32  *      amixer set "DVC Out Ramp" on
  33  *      aplay xxx.wav &
  34  *      amixer set "DVC Out"  80%  // Volume Down
  35  *      amixer set "DVC Out" 100%  // Volume Up
  36  */
  37
  38 /dts-v1/;
  39 #include "r8a7791.dtsi"
  40 #include <dt-bindings/gpio/gpio.h>
  41 #include <dt-bindings/input/input.h>
  42
  43 / {
  44         model = "Koelsch";
  45         compatible = "renesas,koelsch", "renesas,r8a7791";
  46
  47         aliases {
  48                 serial0 = &scif0;
  49                 serial1 = &scif1;
  50                 i2c9 = &gpioi2c1;
  51                 i2c10 = &gpioi2c2;
  52                 i2c11 = &gpioi2c4;
  53                 i2c12 = &i2cexio1;
  54                 i2c13 = &i2chdmi;
  55                 i2c14 = &i2cexio4;
  56                 mmc0 = &sdhi0;
  57                 mmc1 = &sdhi1;
  58                 mmc2 = &sdhi2;
  59         };
  60
  61         chosen {
  62                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
  63                 stdout-path = "serial0:115200n8";
  64         };
  65
  66         memory@40000000 {
  67                 device_type = "memory";
  68                 reg = <0 0x40000000 0 0x40000000>;
  69         };
  70
  71         memory@200000000 {
  72                 device_type = "memory";
  73                 reg = <2 0x00000000 0 0x40000000>;
  74         };
  75
  76         lbsc {
  77                 #address-cells = <1>;
  78                 #size-cells = <1>;
  79         };
  80
  81         keyboard {
  82                 compatible = "gpio-keys";
  83
  84                 pinctrl-0 = <&keyboard_pins>;
  85                 pinctrl-names = "default";
  86
  87                 key-1 {
  88                         gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
  89                         linux,code = <KEY_1>;
  90                         label = "SW2-1";
  91                         wakeup-source;
  92                         debounce-interval = <20>;
  93                 };
  94                 key-2 {
  95                         gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
  96                         linux,code = <KEY_2>;
  97                         label = "SW2-2";
  98                         wakeup-source;
  99                         debounce-interval = <20>;
 100                 };
 101                 key-3 {
 102                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
 103                         linux,code = <KEY_3>;
 104                         label = "SW2-3";
 105                         wakeup-source;
 106                         debounce-interval = <20>;
 107                 };
 108                 key-4 {
 109                         gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
 110                         linux,code = <KEY_4>;
 111                         label = "SW2-4";
 112                         wakeup-source;
 113                         debounce-interval = <20>;
 114                 };
 115                 key-a {
 116                         gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 117                         linux,code = <KEY_A>;
 118                         label = "SW30";
 119                         wakeup-source;
 120                         debounce-interval = <20>;
 121                 };
 122                 key-b {
 123                         gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 124                         linux,code = <KEY_B>;
 125                         label = "SW31";
 126                         wakeup-source;
 127                         debounce-interval = <20>;
 128                 };
 129                 key-c {
 130                         gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 131                         linux,code = <KEY_C>;
 132                         label = "SW32";
 133                         wakeup-source;
 134                         debounce-interval = <20>;
 135                 };
 136                 key-d {
 137                         gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 138                         linux,code = <KEY_D>;
 139                         label = "SW33";
 140                         wakeup-source;
 141                         debounce-interval = <20>;
 142                 };
 143                 key-e {
 144                         gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
 145                         linux,code = <KEY_E>;
 146                         label = "SW34";
 147                         wakeup-source;
 148                         debounce-interval = <20>;
 149                 };
 150                 key-f {
 151                         gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
 152                         linux,code = <KEY_F>;
 153                         label = "SW35";
 154                         wakeup-source;
 155                         debounce-interval = <20>;
 156                 };
 157                 key-g {
 158                         gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 159                         linux,code = <KEY_G>;
 160                         label = "SW36";
 161                         wakeup-source;
 162                         debounce-interval = <20>;
 163                 };
 164         };
 165
 166         leds {
 167                 compatible = "gpio-leds";
 168                 led6 {
 169                         gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 170                         label = "LED6";
 171                 };
 172                 led7 {
 173                         gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 174                         label = "LED7";
 175                 };
 176                 led8 {
 177                         gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 178                         label = "LED8";
 179                 };
 180         };
 181
 182         vcc_sdhi0: regulator-vcc-sdhi0 {
 183                 compatible = "regulator-fixed";
 184
 185                 regulator-name = "SDHI0 Vcc";
 186                 regulator-min-microvolt = <3300000>;
 187                 regulator-max-microvolt = <3300000>;
 188
 189                 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
 190                 enable-active-high;
 191         };
 192
 193         vccq_sdhi0: regulator-vccq-sdhi0 {
 194                 compatible = "regulator-gpio";
 195
 196                 regulator-name = "SDHI0 VccQ";
 197                 regulator-min-microvolt = <1800000>;
 198                 regulator-max-microvolt = <3300000>;
 199
 200                 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
 201                 gpios-states = <1>;
 202                 states = <3300000 1>, <1800000 0>;
 203         };
 204
 205         vcc_sdhi1: regulator-vcc-sdhi1 {
 206                 compatible = "regulator-fixed";
 207
 208                 regulator-name = "SDHI1 Vcc";
 209                 regulator-min-microvolt = <3300000>;
 210                 regulator-max-microvolt = <3300000>;
 211
 212                 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
 213                 enable-active-high;
 214         };
 215
 216         vccq_sdhi1: regulator-vccq-sdhi1 {
 217                 compatible = "regulator-gpio";
 218
 219                 regulator-name = "SDHI1 VccQ";
 220                 regulator-min-microvolt = <1800000>;
 221                 regulator-max-microvolt = <3300000>;
 222
 223                 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
 224                 gpios-states = <1>;
 225                 states = <3300000 1>, <1800000 0>;
 226         };
 227
 228         vcc_sdhi2: regulator-vcc-sdhi2 {
 229                 compatible = "regulator-fixed";
 230
 231                 regulator-name = "SDHI2 Vcc";
 232                 regulator-min-microvolt = <3300000>;
 233                 regulator-max-microvolt = <3300000>;
 234
 235                 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
 236                 enable-active-high;
 237         };
 238
 239         vccq_sdhi2: regulator-vccq-sdhi2 {
 240                 compatible = "regulator-gpio";
 241
 242                 regulator-name = "SDHI2 VccQ";
 243                 regulator-min-microvolt = <1800000>;
 244                 regulator-max-microvolt = <3300000>;
 245
 246                 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
 247                 gpios-states = <1>;
 248                 states = <3300000 1>, <1800000 0>;
 249         };
 250
 251         audio_clock: audio_clock {
 252                 compatible = "fixed-clock";
 253                 #clock-cells = <0>;
 254                 clock-frequency = <11289600>;
 255         };
 256
 257         rsnd_ak4643: sound {
 258                 compatible = "simple-audio-card";
 259
 260                 simple-audio-card,format = "left_j";
 261                 simple-audio-card,bitclock-master = <&sndcodec>;
 262                 simple-audio-card,frame-master = <&sndcodec>;
 263
 264                 sndcpu: simple-audio-card,cpu {
 265                         sound-dai = <&rcar_sound>;
 266                 };
 267
 268                 sndcodec: simple-audio-card,codec {
 269                         sound-dai = <&ak4643>;
 270                         clocks = <&audio_clock>;
 271                 };
 272         };
 273
 274         hdmi-in {
 275                 compatible = "hdmi-connector";
 276                 type = "a";
 277
 278                 port {
 279                         hdmi_con_in: endpoint {
 280                                 remote-endpoint = <&adv7612_in>;
 281                         };
 282                 };
 283         };
 284
 285         cec_clock: cec-clock {
 286                 compatible = "fixed-clock";
 287                 #clock-cells = <0>;
 288                 clock-frequency = <12000000>;
 289         };
 290
 291         hdmi-out {
 292                 compatible = "hdmi-connector";
 293                 type = "a";
 294
 295                 port {
 296                         hdmi_con_out: endpoint {
 297                                 remote-endpoint = <&adv7511_out>;
 298                         };
 299                 };
 300         };
 301
 302         x2_clk: x2-clock {
 303                 compatible = "fixed-clock";
 304                 #clock-cells = <0>;
 305                 clock-frequency = <74250000>;
 306         };
 307
 308         x13_clk: x13-clock {
 309                 compatible = "fixed-clock";
 310                 #clock-cells = <0>;
 311                 clock-frequency = <148500000>;
 312         };
 313
 314         gpioi2c1: i2c-9 {
 315                 #address-cells = <1>;
 316                 #size-cells = <0>;
 317                 compatible = "i2c-gpio";
 318                 status = "disabled";
 319                 scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 320                 sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 321                 i2c-gpio,delay-us = <5>;
 322         };
 323
 324         gpioi2c2: i2c-10 {
 325                 #address-cells = <1>;
 326                 #size-cells = <0>;
 327                 compatible = "i2c-gpio";
 328                 status = "disabled";
 329                 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 330                 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 331                 i2c-gpio,delay-us = <5>;
 332         };
 333
 334         gpioi2c4: i2c-11 {
 335                 #address-cells = <1>;
 336                 #size-cells = <0>;
 337                 compatible = "i2c-gpio";
 338                 status = "disabled";
 339                 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 340                 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 341                 i2c-gpio,delay-us = <5>;
 342         };
 343
 344         /*
 345          * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
 346          * A fallback to GPIO is provided.
 347          */
 348         i2cexio1: i2c-12 {
 349                 compatible = "i2c-demux-pinctrl";
 350                 i2c-parent = <&i2c1>, <&gpioi2c1>;
 351                 i2c-bus-name = "i2c-exio1";
 352                 #address-cells = <1>;
 353                 #size-cells = <0>;
 354         };
 355
 356         /*
 357          * A fallback to GPIO is provided for I2C2.
 358          */
 359         i2chdmi: i2c-13 {
 360                 compatible = "i2c-demux-pinctrl";
 361                 i2c-parent = <&i2c2>, <&gpioi2c2>;
 362                 i2c-bus-name = "i2c-hdmi";
 363                 #address-cells = <1>;
 364                 #size-cells = <0>;
 365
 366                 ak4643: codec@12 {
 367                         compatible = "asahi-kasei,ak4643";
 368                         #sound-dai-cells = <0>;
 369                         reg = <0x12>;
 370                 };
 371
 372                 composite-in@20 {
 373                         compatible = "adi,adv7180";
 374                         reg = <0x20>;
 375
 376                         port {
 377                                 adv7180: endpoint {
 378                                         bus-width = <8>;
 379                                         remote-endpoint = <&vin1ep>;
 380                                 };
 381                         };
 382                 };
 383
 384                 hdmi@39 {
 385                         compatible = "adi,adv7511w";
 386                         reg = <0x39>;
 387                         interrupt-parent = <&gpio3>;
 388                         interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 389                         clocks = <&cec_clock>;
 390                         clock-names = "cec";
 391
 392                         adi,input-depth = <8>;
 393                         adi,input-colorspace = "rgb";
 394                         adi,input-clock = "1x";
 395
 396                         ports {
 397                                 #address-cells = <1>;
 398                                 #size-cells = <0>;
 399
 400                                 port@0 {
 401                                         reg = <0>;
 402                                         adv7511_in: endpoint {
 403                                                 remote-endpoint = <&du_out_rgb>;
 404                                         };
 405                                 };
 406
 407                                 port@1 {
 408                                         reg = <1>;
 409                                         adv7511_out: endpoint {
 410                                                 remote-endpoint = <&hdmi_con_out>;
 411                                         };
 412                                 };
 413                         };
 414                 };
 415
 416                 hdmi-in@4c {
 417                         compatible = "adi,adv7612";
 418                         reg = <0x4c>;
 419                         interrupt-parent = <&gpio4>;
 420                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 421                         default-input = <0>;
 422
 423                         ports {
 424                                 #address-cells = <1>;
 425                                 #size-cells = <0>;
 426
 427                                 port@0 {
 428                                         reg = <0>;
 429                                         adv7612_in: endpoint {
 430                                                 remote-endpoint = <&hdmi_con_in>;
 431                                         };
 432                                 };
 433
 434                                 port@2 {
 435                                         reg = <2>;
 436                                         adv7612_out: endpoint {
 437                                                 remote-endpoint = <&vin0ep2>;
 438                                         };
 439                                 };
 440                         };
 441                 };
 442
 443                 eeprom@50 {
 444                         compatible = "renesas,r1ex24002", "atmel,24c02";
 445                         reg = <0x50>;
 446                         pagesize = <16>;
 447                 };
 448         };
 449
 450         /*
 451          * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
 452          * A fallback to GPIO is provided.
 453          */
 454         i2cexio4: i2c-14 {
 455                 compatible = "i2c-demux-pinctrl";
 456                 i2c-parent = <&i2c4>, <&gpioi2c4>;
 457                 i2c-bus-name = "i2c-exio4";
 458                 #address-cells = <1>;
 459                 #size-cells = <0>;
 460         };
 461 };
 462
 463 &du {
 464         pinctrl-0 = <&du_pins>;
 465         pinctrl-names = "default";
 466         status = "okay";
 467
 468         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 469                  <&x13_clk>, <&x2_clk>;
 470         clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
 471
 472         ports {
 473                 port@0 {
 474                         endpoint {
 475                                 remote-endpoint = <&adv7511_in>;
 476                         };
 477                 };
 478         };
 479 };
 480
 481 &lvds0 {
 482         ports {
 483                 port@1 {
 484                         lvds_connector: endpoint {
 485                         };
 486                 };
 487         };
 488 };
 489
 490 &extal_clk {
 491         clock-frequency = <20000000>;
 492 };
 493
 494 &pfc {
 495         pinctrl-0 = <&scif_clk_pins>;
 496         pinctrl-names = "default";
 497
 498         i2c1_pins: i2c1 {
 499                 groups = "i2c1";
 500                 function = "i2c1";
 501         };
 502
 503         i2c2_pins: i2c2 {
 504                 groups = "i2c2";
 505                 function = "i2c2";
 506         };
 507
 508         i2c4_pins: i2c4 {
 509                 groups = "i2c4_c";
 510                 function = "i2c4";
 511         };
 512
 513         du_pins: du {
 514                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 515                 function = "du";
 516         };
 517
 518         scif0_pins: scif0 {
 519                 groups = "scif0_data_d";
 520                 function = "scif0";
 521         };
 522
 523         scif1_pins: scif1 {
 524                 groups = "scif1_data_d";
 525                 function = "scif1";
 526         };
 527
 528         scif_clk_pins: scif_clk {
 529                 groups = "scif_clk";
 530                 function = "scif_clk";
 531         };
 532
 533         ether_pins: ether {
 534                 groups = "eth_link", "eth_mdio", "eth_rmii";
 535                 function = "eth";
 536         };
 537
 538         phy1_pins: phy1 {
 539                 groups = "intc_irq0";
 540                 function = "intc";
 541         };
 542
 543         pmic_irq_pins: pmicirq {
 544                 groups = "intc_irq2";
 545                 function = "intc";
 546         };
 547
 548         sdhi0_pins: sd0 {
 549                 groups = "sdhi0_data4", "sdhi0_ctrl";
 550                 function = "sdhi0";
 551                 power-source = <3300>;
 552         };
 553
 554         sdhi0_pins_uhs: sd0_uhs {
 555                 groups = "sdhi0_data4", "sdhi0_ctrl";
 556                 function = "sdhi0";
 557                 power-source = <1800>;
 558         };
 559
 560         sdhi1_pins: sd1 {
 561                 groups = "sdhi1_data4", "sdhi1_ctrl";
 562                 function = "sdhi1";
 563                 power-source = <3300>;
 564         };
 565
 566         sdhi1_pins_uhs: sd1_uhs {
 567                 groups = "sdhi1_data4", "sdhi1_ctrl";
 568                 function = "sdhi1";
 569                 power-source = <1800>;
 570         };
 571
 572         sdhi2_pins: sd2 {
 573                 groups = "sdhi2_data4", "sdhi2_ctrl";
 574                 function = "sdhi2";
 575                 power-source = <3300>;
 576         };
 577
 578         sdhi2_pins_uhs: sd2_uhs {
 579                 groups = "sdhi2_data4", "sdhi2_ctrl";
 580                 function = "sdhi2";
 581                 power-source = <1800>;
 582         };
 583
 584         qspi_pins: qspi {
 585                 groups = "qspi_ctrl", "qspi_data4";
 586                 function = "qspi";
 587         };
 588
 589         msiof0_pins: msiof0 {
 590                 groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
 591                                  "msiof0_tx";
 592                 function = "msiof0";
 593         };
 594
 595         usb0_pins: usb0 {
 596                 groups = "usb0";
 597                 function = "usb0";
 598         };
 599
 600         usb1_pins: usb1 {
 601                 groups = "usb1";
 602                 function = "usb1";
 603         };
 604
 605         vin0_pins: vin0 {
 606                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 607                 function = "vin0";
 608         };
 609
 610         vin1_pins: vin1 {
 611                 groups = "vin1_data8", "vin1_clk";
 612                 function = "vin1";
 613         };
 614
 615         sound_pins: sound {
 616                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 617                 function = "ssi";
 618         };
 619
 620         sound_clk_pins: sound_clk {
 621                 groups = "audio_clk_a";
 622                 function = "audio_clk";
 623         };
 624
 625         keyboard_pins: keyboard {
 626                 pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3";
 627                 bias-pull-up;
 628         };
 629 };
 630
 631 &ether {
 632         pinctrl-0 = <&ether_pins>, <&phy1_pins>;
 633         pinctrl-names = "default";
 634
 635         phy-handle = <&phy1>;
 636         renesas,ether-link-active-low;
 637         status = "okay";
 638
 639         phy1: ethernet-phy@1 {
 640                 reg = <1>;
 641                 interrupt-parent = <&irqc0>;
 642                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 643                 micrel,led-mode = <1>;
 644                 reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 645         };
 646 };
 647
 648 &cmt0 {
 649         status = "okay";
 650 };
 651
 652 &rwdt {
 653         timeout-sec = <60>;
 654         status = "okay";
 655 };
 656
 657 &sata0 {
 658         status = "okay";
 659 };
 660
 661 &scif0 {
 662         pinctrl-0 = <&scif0_pins>;
 663         pinctrl-names = "default";
 664
 665         status = "okay";
 666 };
 667
 668 &scif1 {
 669         pinctrl-0 = <&scif1_pins>;
 670         pinctrl-names = "default";
 671
 672         status = "okay";
 673 };
 674
 675 &scif_clk {
 676         clock-frequency = <14745600>;
 677 };
 678
 679 &sdhi0 {
 680         pinctrl-0 = <&sdhi0_pins>;
 681         pinctrl-1 = <&sdhi0_pins_uhs>;
 682         pinctrl-names = "default", "state_uhs";
 683
 684         vmmc-supply = <&vcc_sdhi0>;
 685         vqmmc-supply = <&vccq_sdhi0>;
 686         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 687         wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 688         sd-uhs-sdr50;
 689         sd-uhs-sdr104;
 690         status = "okay";
 691 };
 692
 693 &sdhi1 {
 694         pinctrl-0 = <&sdhi1_pins>;
 695         pinctrl-1 = <&sdhi1_pins_uhs>;
 696         pinctrl-names = "default", "state_uhs";
 697
 698         vmmc-supply = <&vcc_sdhi1>;
 699         vqmmc-supply = <&vccq_sdhi1>;
 700         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 701         wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 702         sd-uhs-sdr50;
 703         status = "okay";
 704 };
 705
 706 &sdhi2 {
 707         pinctrl-0 = <&sdhi2_pins>;
 708         pinctrl-1 = <&sdhi2_pins_uhs>;
 709         pinctrl-names = "default", "state_uhs";
 710
 711         vmmc-supply = <&vcc_sdhi2>;
 712         vqmmc-supply = <&vccq_sdhi2>;
 713         cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
 714         sd-uhs-sdr50;
 715         status = "okay";
 716 };
 717
 718 &qspi {
 719         pinctrl-0 = <&qspi_pins>;
 720         pinctrl-names = "default";
 721
 722         status = "okay";
 723
 724         flash: flash@0 {
 725                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 726                 reg = <0>;
 727                 spi-max-frequency = <30000000>;
 728                 spi-tx-bus-width = <4>;
 729                 spi-rx-bus-width = <4>;
 730                 spi-cpha;
 731                 spi-cpol;
 732                 m25p,fast-read;
 733
 734                 partitions {
 735                         compatible = "fixed-partitions";
 736                         #address-cells = <1>;
 737                         #size-cells = <1>;
 738
 739                         partition@0 {
 740                                 label = "loader";
 741                                 reg = <0x00000000 0x00080000>;
 742                                 read-only;
 743                         };
 744                         partition@80000 {
 745                                 label = "user";
 746                                 reg = <0x00080000 0x00580000>;
 747                                 read-only;
 748                         };
 749                         partition@600000 {
 750                                 label = "flash";
 751                                 reg = <0x00600000 0x03a00000>;
 752                         };
 753                 };
 754         };
 755 };
 756
 757 &msiof0 {
 758         pinctrl-0 = <&msiof0_pins>;
 759         pinctrl-names = "default";
 760
 761         status = "okay";
 762
 763         pmic: pmic@0 {
 764                 compatible = "renesas,r2a11302ft";
 765                 reg = <0>;
 766                 spi-max-frequency = <6000000>;
 767                 spi-cpol;
 768                 spi-cpha;
 769         };
 770 };
 771
 772 &i2c1 {
 773         pinctrl-0 = <&i2c1_pins>;
 774         pinctrl-names = "i2c-exio1";
 775 };
 776
 777 &i2c2 {
 778         pinctrl-0 = <&i2c2_pins>;
 779         pinctrl-names = "i2c-hdmi";
 780
 781         clock-frequency = <100000>;
 782 };
 783
 784 &i2c4 {
 785         pinctrl-0 = <&i2c4_pins>;
 786         pinctrl-names = "i2c-exio4";
 787 };
 788
 789 &i2c6 {
 790         pinctrl-names = "default";
 791         pinctrl-0 = <&pmic_irq_pins>;
 792         status = "okay";
 793         clock-frequency = <100000>;
 794
 795         pmic@58 {
 796                 compatible = "dlg,da9063";
 797                 reg = <0x58>;
 798                 interrupt-parent = <&irqc0>;
 799                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 800                 interrupt-controller;
 801
 802                 rtc {
 803                         compatible = "dlg,da9063-rtc";
 804                 };
 805
 806                 wdt {
 807                         compatible = "dlg,da9063-watchdog";
 808                 };
 809         };
 810
 811         vdd_dvfs: regulator@68 {
 812                 compatible = "dlg,da9210";
 813                 reg = <0x68>;
 814                 interrupt-parent = <&irqc0>;
 815                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 816
 817                 regulator-min-microvolt = <1000000>;
 818                 regulator-max-microvolt = <1000000>;
 819                 regulator-boot-on;
 820                 regulator-always-on;
 821         };
 822 };
 823
 824 &pci0 {
 825         status = "okay";
 826         pinctrl-0 = <&usb0_pins>;
 827         pinctrl-names = "default";
 828 };
 829
 830 &pci1 {
 831         status = "okay";
 832         pinctrl-0 = <&usb1_pins>;
 833         pinctrl-names = "default";
 834 };
 835
 836 &hsusb {
 837         status = "okay";
 838         pinctrl-0 = <&usb0_pins>;
 839         pinctrl-names = "default";
 840         renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 841 };
 842
 843 &usbphy {
 844         status = "okay";
 845 };
 846
 847 &pcie_bus_clk {
 848         clock-frequency = <100000000>;
 849 };
 850
 851 &pciec {
 852         status = "okay";
 853 };
 854
 855 &cpu0 {
 856         cpu0-supply = <&vdd_dvfs>;
 857 };
 858
 859 /* HDMI video input */
 860 &vin0 {
 861         status = "okay";
 862         pinctrl-0 = <&vin0_pins>;
 863         pinctrl-names = "default";
 864
 865         port {
 866                 vin0ep2: endpoint {
 867                         remote-endpoint = <&adv7612_out>;
 868                         bus-width = <24>;
 869                         hsync-active = <0>;
 870                         vsync-active = <0>;
 871                         pclk-sample = <1>;
 872                         data-active = <1>;
 873                 };
 874         };
 875 };
 876
 877 /* composite video input */
 878 &vin1 {
 879         status = "okay";
 880         pinctrl-0 = <&vin1_pins>;
 881         pinctrl-names = "default";
 882
 883         port {
 884                 vin1ep: endpoint {
 885                         remote-endpoint = <&adv7180>;
 886                         bus-width = <8>;
 887                 };
 888         };
 889 };
 890
 891 &rcar_sound {
 892         pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
 893         pinctrl-names = "default";
 894
 895         /* Single DAI */
 896         #sound-dai-cells = <0>;
 897
 898         status = "okay";
 899
 900         rcar_sound,dai {
 901                 dai0 {
 902                         playback = <&ssi0>, <&src2>, <&dvc0>;
 903                         capture  = <&ssi1>, <&src3>, <&dvc1>;
 904                 };
 905         };
 906 };
 907
 908 &ssi1 {
 909         shared-pin;
 910 };