arch/arm/boot/dts/r8a7790-lager.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for the Lager board
   4  *
   5  * Copyright (C) 2013-2014 Renesas Solutions Corp.
   6  * Copyright (C) 2014 Cogent Embedded, Inc.
   7  * Copyright (C) 2015-2016 Renesas Electronics Corporation
   8  */
   9
  10 /*
  11  * SSI-AK4643
  12  *
  13  * SW1: 1: AK4643
  14  *      2: CN22
  15  *      3: ADV7511
  16  *
  17  * This command is required when Playback/Capture
  18  *
  19  *      amixer set "LINEOUT Mixer DACL" on
  20  *      amixer set "DVC Out" 100%
  21  *      amixer set "DVC In" 100%
  22  *
  23  * You can use Mute
  24  *
  25  *      amixer set "DVC Out Mute" on
  26  *      amixer set "DVC In Mute" on
  27  *
  28  * You can use Volume Ramp
  29  *
  30  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  31  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  32  *      amixer set "DVC Out Ramp" on
  33  *      aplay xxx.wav &
  34  *      amixer set "DVC Out"  80%  // Volume Down
  35  *      amixer set "DVC Out" 100%  // Volume Up
  36  */
  37
  38 /dts-v1/;
  39 #include "r8a7790.dtsi"
  40 #include <dt-bindings/gpio/gpio.h>
  41 #include <dt-bindings/input/input.h>
  42
  43 / {
  44         model = "Lager";
  45         compatible = "renesas,lager", "renesas,r8a7790";
  46
  47         aliases {
  48                 serial0 = &scif0;
  49                 serial1 = &scifa1;
  50                 i2c8 = &gpioi2c1;
  51                 i2c9 = &gpioi2c2;
  52                 i2c10 = &i2cexio0;
  53                 i2c11 = &i2cexio1;
  54                 i2c12 = &i2chdmi;
  55                 i2c13 = &i2cpwr;
  56                 mmc0 = &mmcif1;
  57                 mmc1 = &sdhi0;
  58                 mmc2 = &sdhi2;
  59         };
  60
  61         chosen {
  62                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
  63                 stdout-path = "serial0:115200n8";
  64         };
  65
  66         memory@40000000 {
  67                 device_type = "memory";
  68                 reg = <0 0x40000000 0 0x40000000>;
  69         };
  70
  71         memory@140000000 {
  72                 device_type = "memory";
  73                 reg = <1 0x40000000 0 0xc0000000>;
  74         };
  75
  76         lbsc {
  77                 #address-cells = <1>;
  78                 #size-cells = <1>;
  79         };
  80
  81         keyboard {
  82                 compatible = "gpio-keys";
  83
  84                 pinctrl-0 = <&keyboard_pins>;
  85                 pinctrl-names = "default";
  86
  87                 one {
  88                         linux,code = <KEY_1>;
  89                         label = "SW2-1";
  90                         wakeup-source;
  91                         debounce-interval = <20>;
  92                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  93                 };
  94                 two {
  95                         linux,code = <KEY_2>;
  96                         label = "SW2-2";
  97                         wakeup-source;
  98                         debounce-interval = <20>;
  99                         gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 100                 };
 101                 three {
 102                         linux,code = <KEY_3>;
 103                         label = "SW2-3";
 104                         wakeup-source;
 105                         debounce-interval = <20>;
 106                         gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
 107                 };
 108                 four {
 109                         linux,code = <KEY_4>;
 110                         label = "SW2-4";
 111                         wakeup-source;
 112                         debounce-interval = <20>;
 113                         gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 114                 };
 115         };
 116
 117         leds {
 118                 compatible = "gpio-leds";
 119                 led6 {
 120                         gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
 121                 };
 122                 led7 {
 123                         gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
 124                 };
 125                 led8 {
 126                         gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
 127                 };
 128         };
 129
 130         fixedregulator3v3: regulator-3v3 {
 131                 compatible = "regulator-fixed";
 132                 regulator-name = "fixed-3.3V";
 133                 regulator-min-microvolt = <3300000>;
 134                 regulator-max-microvolt = <3300000>;
 135                 regulator-boot-on;
 136                 regulator-always-on;
 137         };
 138
 139         vcc_sdhi0: regulator-vcc-sdhi0 {
 140                 compatible = "regulator-fixed";
 141
 142                 regulator-name = "SDHI0 Vcc";
 143                 regulator-min-microvolt = <3300000>;
 144                 regulator-max-microvolt = <3300000>;
 145
 146                 gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
 147                 enable-active-high;
 148         };
 149
 150         vccq_sdhi0: regulator-vccq-sdhi0 {
 151                 compatible = "regulator-gpio";
 152
 153                 regulator-name = "SDHI0 VccQ";
 154                 regulator-min-microvolt = <1800000>;
 155                 regulator-max-microvolt = <3300000>;
 156
 157                 gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
 158                 gpios-states = <1>;
 159                 states = <3300000 1>, <1800000 0>;
 160         };
 161
 162         vcc_sdhi2: regulator-vcc-sdhi2 {
 163                 compatible = "regulator-fixed";
 164
 165                 regulator-name = "SDHI2 Vcc";
 166                 regulator-min-microvolt = <3300000>;
 167                 regulator-max-microvolt = <3300000>;
 168
 169                 gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
 170                 enable-active-high;
 171         };
 172
 173         vccq_sdhi2: regulator-vccq-sdhi2 {
 174                 compatible = "regulator-gpio";
 175
 176                 regulator-name = "SDHI2 VccQ";
 177                 regulator-min-microvolt = <1800000>;
 178                 regulator-max-microvolt = <3300000>;
 179
 180                 gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
 181                 gpios-states = <1>;
 182                 states = <3300000 1>, <1800000 0>;
 183         };
 184
 185         audio_clock: audio_clock {
 186                 compatible = "fixed-clock";
 187                 #clock-cells = <0>;
 188                 clock-frequency = <11289600>;
 189         };
 190
 191         rsnd_ak4643: sound {
 192                 compatible = "simple-audio-card";
 193
 194                 simple-audio-card,format = "left_j";
 195                 simple-audio-card,bitclock-master = <&sndcodec>;
 196                 simple-audio-card,frame-master = <&sndcodec>;
 197
 198                 sndcpu: simple-audio-card,cpu {
 199                         sound-dai = <&rcar_sound>;
 200                 };
 201
 202                 sndcodec: simple-audio-card,codec {
 203                         sound-dai = <&ak4643>;
 204                         clocks = <&audio_clock>;
 205                 };
 206         };
 207
 208         vga-encoder {
 209                 compatible = "adi,adv7123";
 210
 211                 ports {
 212                         #address-cells = <1>;
 213                         #size-cells = <0>;
 214
 215                         port@0 {
 216                                 reg = <0>;
 217                                 adv7123_in: endpoint {
 218                                         remote-endpoint = <&du_out_rgb>;
 219                                 };
 220                         };
 221                         port@1 {
 222                                 reg = <1>;
 223                                 adv7123_out: endpoint {
 224                                         remote-endpoint = <&vga_in>;
 225                                 };
 226                         };
 227                 };
 228         };
 229
 230         vga {
 231                 compatible = "vga-connector";
 232
 233                 port {
 234                         vga_in: endpoint {
 235                                 remote-endpoint = <&adv7123_out>;
 236                         };
 237                 };
 238         };
 239
 240         hdmi-in {
 241                 compatible = "hdmi-connector";
 242                 type = "a";
 243
 244                 port {
 245                         hdmi_con_in: endpoint {
 246                                 remote-endpoint = <&adv7612_in>;
 247                         };
 248                 };
 249         };
 250
 251         cec_clock: cec-clock {
 252                 compatible = "fixed-clock";
 253                 #clock-cells = <0>;
 254                 clock-frequency = <12000000>;
 255         };
 256
 257         hdmi-out {
 258                 compatible = "hdmi-connector";
 259                 type = "a";
 260
 261                 port {
 262                         hdmi_con_out: endpoint {
 263                                 remote-endpoint = <&adv7511_out>;
 264                         };
 265                 };
 266         };
 267
 268         x2_clk: x2-clock {
 269                 compatible = "fixed-clock";
 270                 #clock-cells = <0>;
 271                 clock-frequency = <148500000>;
 272         };
 273
 274         x13_clk: x13-clock {
 275                 compatible = "fixed-clock";
 276                 #clock-cells = <0>;
 277                 clock-frequency = <148500000>;
 278         };
 279
 280         gpioi2c1: i2c-8 {
 281                 #address-cells = <1>;
 282                 #size-cells = <0>;
 283                 compatible = "i2c-gpio";
 284                 status = "disabled";
 285                 scl-gpios = <&gpio1 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 286                 sda-gpios = <&gpio1 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 287                 i2c-gpio,delay-us = <5>;
 288         };
 289
 290         gpioi2c2: i2c-9 {
 291                 #address-cells = <1>;
 292                 #size-cells = <0>;
 293                 compatible = "i2c-gpio";
 294                 status = "disabled";
 295                 scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 296                 sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 297                 i2c-gpio,delay-us = <5>;
 298         };
 299
 300         /*
 301          * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
 302          * We use the I2C demuxer, so the desired IP core can be selected at runtime
 303          * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
 304          * Note: For testing the I2C slave feature, it is convenient to connect this
 305          * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
 306          * instantiate the slave device at runtime according to the documentation.
 307          * You can then communicate with the slave via IIC3.
 308          *
 309          * IIC0/I2C0 does not appear to support fallback to GPIO.
 310          */
 311         i2cexio0: i2c-10 {
 312                 compatible = "i2c-demux-pinctrl";
 313                 i2c-parent = <&iic0>, <&i2c0>;
 314                 i2c-bus-name = "i2c-exio0";
 315                 #address-cells = <1>;
 316                 #size-cells = <0>;
 317         };
 318
 319         /*
 320          * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
 321          * This is similar to the arangement described for i2cexio0 (above)
 322          * with a fallback to GPIO also provided.
 323          */
 324         i2cexio1: i2c-11 {
 325                 compatible = "i2c-demux-pinctrl";
 326                 i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
 327                 i2c-bus-name = "i2c-exio1";
 328                 #address-cells = <1>;
 329                 #size-cells = <0>;
 330         };
 331
 332         /*
 333          * IIC2 and I2C2 may be switched using pinmux.
 334          * A fallback to GPIO is also provided.
 335          */
 336         i2chdmi: i2c-12 {
 337                 compatible = "i2c-demux-pinctrl";
 338                 i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
 339                 i2c-bus-name = "i2c-hdmi";
 340                 #address-cells = <1>;
 341                 #size-cells = <0>;
 342
 343                 ak4643: codec@12 {
 344                         compatible = "asahi-kasei,ak4643";
 345                         #sound-dai-cells = <0>;
 346                         reg = <0x12>;
 347                 };
 348
 349                 composite-in@20 {
 350                         compatible = "adi,adv7180";
 351                         reg = <0x20>;
 352
 353                         port {
 354                                 adv7180: endpoint {
 355                                         bus-width = <8>;
 356                                         remote-endpoint = <&vin1ep0>;
 357                                 };
 358                         };
 359                 };
 360
 361                 hdmi@39 {
 362                         compatible = "adi,adv7511w";
 363                         reg = <0x39>;
 364                         interrupt-parent = <&gpio1>;
 365                         interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
 366                         clocks = <&cec_clock>;
 367                         clock-names = "cec";
 368
 369                         adi,input-depth = <8>;
 370                         adi,input-colorspace = "rgb";
 371                         adi,input-clock = "1x";
 372
 373                         ports {
 374                                 #address-cells = <1>;
 375                                 #size-cells = <0>;
 376
 377                                 port@0 {
 378                                         reg = <0>;
 379                                         adv7511_in: endpoint {
 380                                                 remote-endpoint = <&lvds0_out>;
 381                                         };
 382                                 };
 383
 384                                 port@1 {
 385                                         reg = <1>;
 386                                         adv7511_out: endpoint {
 387                                                 remote-endpoint = <&hdmi_con_out>;
 388                                         };
 389                                 };
 390                         };
 391                 };
 392
 393                 hdmi-in@4c {
 394                         compatible = "adi,adv7612";
 395                         reg = <0x4c>;
 396                         interrupt-parent = <&gpio1>;
 397                         interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
 398                         default-input = <0>;
 399
 400                         ports {
 401                                 #address-cells = <1>;
 402                                 #size-cells = <0>;
 403
 404                                 port@0 {
 405                                         reg = <0>;
 406                                         adv7612_in: endpoint {
 407                                                 remote-endpoint = <&hdmi_con_in>;
 408                                         };
 409                                 };
 410
 411                                 port@2 {
 412                                         reg = <2>;
 413                                         adv7612_out: endpoint {
 414                                                 remote-endpoint = <&vin0ep2>;
 415                                         };
 416                                 };
 417                         };
 418                 };
 419         };
 420
 421         /*
 422          * IIC3 and I2C3 may be switched using pinmux.
 423          * IIC3/I2C3 does not appear to support fallback to GPIO.
 424          */
 425         i2cpwr: i2c-13 {
 426                 compatible = "i2c-demux-pinctrl";
 427                 pinctrl-names = "default";
 428                 pinctrl-0 = <&pmic_irq_pins>;
 429                 i2c-parent = <&iic3>, <&i2c3>;
 430                 i2c-bus-name = "i2c-pwr";
 431                 #address-cells = <1>;
 432                 #size-cells = <0>;
 433
 434                 pmic@58 {
 435                         compatible = "dlg,da9063";
 436                         reg = <0x58>;
 437                         interrupt-parent = <&irqc0>;
 438                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 439                         interrupt-controller;
 440
 441                         rtc {
 442                                 compatible = "dlg,da9063-rtc";
 443                         };
 444
 445                         wdt {
 446                                 compatible = "dlg,da9063-watchdog";
 447                         };
 448                 };
 449
 450                 vdd_dvfs: regulator@68 {
 451                         compatible = "dlg,da9210";
 452                         reg = <0x68>;
 453                         interrupt-parent = <&irqc0>;
 454                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 455
 456                         regulator-min-microvolt = <1000000>;
 457                         regulator-max-microvolt = <1000000>;
 458                         regulator-boot-on;
 459                         regulator-always-on;
 460                 };
 461         };
 462 };
 463
 464 &du {
 465         pinctrl-0 = <&du_pins>;
 466         pinctrl-names = "default";
 467         status = "okay";
 468
 469         clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
 470                  <&x13_clk>, <&x2_clk>;
 471         clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1";
 472
 473         ports {
 474                 port@0 {
 475                         endpoint {
 476                                 remote-endpoint = <&adv7123_in>;
 477                         };
 478                 };
 479         };
 480 };
 481
 482 &lvds0 {
 483         status = "okay";
 484
 485         ports {
 486                 port@1 {
 487                         endpoint {
 488                                 remote-endpoint = <&adv7511_in>;
 489                         };
 490                 };
 491         };
 492 };
 493
 494 &lvds1 {
 495         ports {
 496                 port@1 {
 497                         lvds_connector: endpoint {
 498                         };
 499                 };
 500         };
 501 };
 502
 503 &extal_clk {
 504         clock-frequency = <20000000>;
 505 };
 506
 507 &pfc {
 508         pinctrl-0 = <&scif_clk_pins>;
 509         pinctrl-names = "default";
 510
 511         du_pins: du {
 512                 groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
 513                 function = "du";
 514         };
 515
 516         scif0_pins: scif0 {
 517                 groups = "scif0_data";
 518                 function = "scif0";
 519         };
 520
 521         scif_clk_pins: scif_clk {
 522                 groups = "scif_clk";
 523                 function = "scif_clk";
 524         };
 525
 526         ether_pins: ether {
 527                 groups = "eth_link", "eth_mdio", "eth_rmii";
 528                 function = "eth";
 529         };
 530
 531         phy1_pins: phy1 {
 532                 groups = "intc_irq0";
 533                 function = "intc";
 534         };
 535
 536         scifa1_pins: scifa1 {
 537                 groups = "scifa1_data";
 538                 function = "scifa1";
 539         };
 540
 541         sdhi0_pins: sd0 {
 542                 groups = "sdhi0_data4", "sdhi0_ctrl";
 543                 function = "sdhi0";
 544                 power-source = <3300>;
 545         };
 546
 547         sdhi0_pins_uhs: sd0_uhs {
 548                 groups = "sdhi0_data4", "sdhi0_ctrl";
 549                 function = "sdhi0";
 550                 power-source = <1800>;
 551         };
 552
 553         sdhi2_pins: sd2 {
 554                 groups = "sdhi2_data4", "sdhi2_ctrl";
 555                 function = "sdhi2";
 556                 power-source = <3300>;
 557         };
 558
 559         sdhi2_pins_uhs: sd2_uhs {
 560                 groups = "sdhi2_data4", "sdhi2_ctrl";
 561                 function = "sdhi2";
 562                 power-source = <1800>;
 563         };
 564
 565         mmc1_pins: mmc1 {
 566                 groups = "mmc1_data8", "mmc1_ctrl";
 567                 function = "mmc1";
 568         };
 569
 570         qspi_pins: qspi {
 571                 groups = "qspi_ctrl", "qspi_data4";
 572                 function = "qspi";
 573         };
 574
 575         msiof1_pins: msiof1 {
 576                 groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
 577                                  "msiof1_tx";
 578                 function = "msiof1";
 579         };
 580
 581         i2c0_pins: i2c0 {
 582                 groups = "i2c0";
 583                 function = "i2c0";
 584         };
 585
 586         iic0_pins: iic0 {
 587                 groups = "iic0";
 588                 function = "iic0";
 589         };
 590
 591         i2c1_pins: i2c1 {
 592                 groups = "i2c1";
 593                 function = "i2c1";
 594         };
 595
 596         iic1_pins: iic1 {
 597                 groups = "iic1";
 598                 function = "iic1";
 599         };
 600
 601         i2c2_pins: i2c2 {
 602                 groups = "i2c2";
 603                 function = "i2c2";
 604         };
 605
 606         iic2_pins: iic2 {
 607                 groups = "iic2";
 608                 function = "iic2";
 609         };
 610
 611         i2c3_pins: i2c3 {
 612                 groups = "i2c3";
 613                 function = "i2c3";
 614         };
 615
 616         iic3_pins: iic3 {
 617                 groups = "iic3";
 618                 function = "iic3";
 619         };
 620
 621         pmic_irq_pins: pmicirq {
 622                 groups = "intc_irq2";
 623                 function = "intc";
 624         };
 625
 626         hsusb_pins: hsusb {
 627                 groups = "usb0_ovc_vbus";
 628                 function = "usb0";
 629         };
 630
 631         usb0_pins: usb0 {
 632                 groups = "usb0";
 633                 function = "usb0";
 634         };
 635
 636         usb1_pins: usb1 {
 637                 groups = "usb1";
 638                 function = "usb1";
 639         };
 640
 641         usb2_pins: usb2 {
 642                 groups = "usb2";
 643                 function = "usb2";
 644         };
 645
 646         vin0_pins: vin0 {
 647                 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
 648                 function = "vin0";
 649         };
 650
 651         vin1_pins: vin1 {
 652                 groups = "vin1_data8", "vin1_clk";
 653                 function = "vin1";
 654         };
 655
 656         sound_pins: sound {
 657                 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
 658                 function = "ssi";
 659         };
 660
 661         sound_clk_pins: sound_clk {
 662                 groups = "audio_clk_a";
 663                 function = "audio_clk";
 664         };
 665
 666         keyboard_pins: keyboard {
 667                 pins = "GP_1_14", "GP_1_24", "GP_1_26", "GP_1_28";
 668                 bias-pull-up;
 669         };
 670 };
 671
 672 &ether {
 673         pinctrl-0 = <&ether_pins>, <&phy1_pins>;
 674         pinctrl-names = "default";
 675
 676         phy-handle = <&phy1>;
 677         renesas,ether-link-active-low;
 678         status = "okay";
 679
 680         phy1: ethernet-phy@1 {
 681                 reg = <1>;
 682                 interrupt-parent = <&irqc0>;
 683                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 684                 micrel,led-mode = <1>;
 685                 reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
 686         };
 687 };
 688
 689 &cmt0 {
 690         status = "okay";
 691 };
 692
 693 &mmcif1 {
 694         pinctrl-0 = <&mmc1_pins>;
 695         pinctrl-names = "default";
 696
 697         vmmc-supply = <&fixedregulator3v3>;
 698         bus-width = <8>;
 699         non-removable;
 700         status = "okay";
 701 };
 702
 703 &sata1 {
 704         status = "okay";
 705 };
 706
 707 &qspi {
 708         pinctrl-0 = <&qspi_pins>;
 709         pinctrl-names = "default";
 710
 711         status = "okay";
 712
 713         flash: flash@0 {
 714                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 715                 reg = <0>;
 716                 spi-max-frequency = <30000000>;
 717                 spi-tx-bus-width = <4>;
 718                 spi-rx-bus-width = <4>;
 719                 spi-cpha;
 720                 spi-cpol;
 721                 m25p,fast-read;
 722
 723                 partitions {
 724                         compatible = "fixed-partitions";
 725                         #address-cells = <1>;
 726                         #size-cells = <1>;
 727
 728                         partition@0 {
 729                                 label = "loader";
 730                                 reg = <0x00000000 0x00040000>;
 731                                 read-only;
 732                         };
 733                         partition@40000 {
 734                                 label = "user";
 735                                 reg = <0x00040000 0x00400000>;
 736                                 read-only;
 737                         };
 738                         partition@440000 {
 739                                 label = "flash";
 740                                 reg = <0x00440000 0x03bc0000>;
 741                         };
 742                 };
 743         };
 744 };
 745
 746 &scif0 {
 747         pinctrl-0 = <&scif0_pins>;
 748         pinctrl-names = "default";
 749
 750         status = "okay";
 751 };
 752
 753 &scifa1 {
 754         pinctrl-0 = <&scifa1_pins>;
 755         pinctrl-names = "default";
 756
 757         status = "okay";
 758 };
 759
 760 &scif_clk {
 761         clock-frequency = <14745600>;
 762 };
 763
 764 &msiof1 {
 765         pinctrl-0 = <&msiof1_pins>;
 766         pinctrl-names = "default";
 767
 768         status = "okay";
 769
 770         pmic: pmic@0 {
 771                 compatible = "renesas,r2a11302ft";
 772                 reg = <0>;
 773                 spi-max-frequency = <6000000>;
 774                 spi-cpol;
 775                 spi-cpha;
 776         };
 777 };
 778
 779 &sdhi0 {
 780         pinctrl-0 = <&sdhi0_pins>;
 781         pinctrl-1 = <&sdhi0_pins_uhs>;
 782         pinctrl-names = "default", "state_uhs";
 783
 784         vmmc-supply = <&vcc_sdhi0>;
 785         vqmmc-supply = <&vccq_sdhi0>;
 786         cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 787         sd-uhs-sdr50;
 788         sd-uhs-sdr104;
 789         status = "okay";
 790 };
 791
 792 &sdhi2 {
 793         pinctrl-0 = <&sdhi2_pins>;
 794         pinctrl-1 = <&sdhi2_pins_uhs>;
 795         pinctrl-names = "default", "state_uhs";
 796
 797         vmmc-supply = <&vcc_sdhi2>;
 798         vqmmc-supply = <&vccq_sdhi2>;
 799         cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
 800         sd-uhs-sdr50;
 801         status = "okay";
 802 };
 803
 804 &cpu0 {
 805         cpu0-supply = <&vdd_dvfs>;
 806 };
 807
 808 &i2c0   {
 809         pinctrl-0 = <&i2c0_pins>;
 810         pinctrl-names = "i2c-exio0";
 811 };
 812
 813 &iic0   {
 814         pinctrl-0 = <&iic0_pins>;
 815         pinctrl-names = "i2c-exio0";
 816 };
 817
 818 &i2c1   {
 819         pinctrl-0 = <&i2c1_pins>;
 820         pinctrl-names = "i2c-exio1";
 821 };
 822
 823 &iic1   {
 824         pinctrl-0 = <&iic1_pins>;
 825         pinctrl-names = "i2c-exio1";
 826 };
 827
 828 &i2c2   {
 829         pinctrl-0 = <&i2c2_pins>;
 830         pinctrl-names = "i2c-hdmi";
 831
 832         clock-frequency = <100000>;
 833 };
 834
 835 &iic2   {
 836         pinctrl-0 = <&iic2_pins>;
 837         pinctrl-names = "i2c-hdmi";
 838
 839         clock-frequency = <100000>;
 840 };
 841
 842 &i2c3   {
 843         pinctrl-0 = <&i2c3_pins>;
 844         pinctrl-names = "i2c-pwr";
 845 };
 846
 847 &iic3   {
 848         pinctrl-0 = <&iic3_pins>;
 849         pinctrl-names = "i2c-pwr";
 850 };
 851
 852 &pci0 {
 853         status = "okay";
 854         pinctrl-0 = <&usb0_pins>;
 855         pinctrl-names = "default";
 856 };
 857
 858 &pci1 {
 859         status = "okay";
 860         pinctrl-0 = <&usb1_pins>;
 861         pinctrl-names = "default";
 862 };
 863
 864 &xhci {
 865         status = "okay";
 866         pinctrl-0 = <&usb2_pins>;
 867         pinctrl-names = "default";
 868 };
 869
 870 &pci2 {
 871         status = "okay";
 872         pinctrl-0 = <&usb2_pins>;
 873         pinctrl-names = "default";
 874 };
 875
 876 &hsusb {
 877         status = "okay";
 878         pinctrl-0 = <&hsusb_pins>;
 879         pinctrl-names = "default";
 880         renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
 881 };
 882
 883 &usbphy {
 884         status = "okay";
 885 };
 886
 887 /* HDMI video input */
 888 &vin0 {
 889         pinctrl-0 = <&vin0_pins>;
 890         pinctrl-names = "default";
 891
 892         status = "okay";
 893
 894         port {
 895                 vin0ep2: endpoint {
 896                         remote-endpoint = <&adv7612_out>;
 897                         bus-width = <24>;
 898                         hsync-active = <0>;
 899                         vsync-active = <0>;
 900                         pclk-sample = <1>;
 901                         data-active = <1>;
 902                 };
 903         };
 904 };
 905
 906 /* composite video input */
 907 &vin1 {
 908         pinctrl-0 = <&vin1_pins>;
 909         pinctrl-names = "default";
 910
 911         status = "okay";
 912
 913         port {
 914                 vin1ep0: endpoint {
 915                         remote-endpoint = <&adv7180>;
 916                         bus-width = <8>;
 917                 };
 918         };
 919 };
 920
 921 &rcar_sound {
 922         pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
 923         pinctrl-names = "default";
 924
 925         /* Single DAI */
 926         #sound-dai-cells = <0>;
 927
 928         status = "okay";
 929
 930         rcar_sound,dai {
 931                 dai0 {
 932                         playback = <&ssi0>, <&src2>, <&dvc0>;
 933                         capture  = <&ssi1>, <&src3>, <&dvc1>;
 934                 };
 935         };
 936 };
 937
 938 &rwdt {
 939         timeout-sec = <60>;
 940         status = "okay";
 941 };
 942
 943 &ssi1 {
 944         shared-pin;
 945 };