1 // SPDX-License-Identifier: GPL-2.0 OR MIT
3 * Copyright 2015 Endless Mobile, Inc.
4 * Author: Carlo Caione <carlo@endlessm.com>
9 #include <dt-bindings/gpio/gpio.h>
11 #include "meson8b.dtsi"
14 model = "TRONFY MXQ S805";
15 compatible = "tronfy,mxq", "amlogic,meson8b";
22 stdout-path = "serial0:115200n8";
26 device_type = "memory";
27 reg = <0x40000000 0x40000000>;
30 vcck: regulator-vcck {
31 compatible = "pwm-regulator";
33 regulator-name = "VCCK";
34 regulator-min-microvolt = <860000>;
35 regulator-max-microvolt = <1140000>;
37 pwms = <&pwm_cd 0 1148 0>;
38 pwm-dutycycle-range = <100 0>;
44 vcc_1v8: regulator-vcc1v8 {
45 compatible = "regulator-fixed";
47 regulator-name = "VCC1V8";
48 regulator-min-microvolt = <1800000>;
49 regulator-max-microvolt = <1800000>;
51 vin-supply = <&vcc_3v3>;
54 vcc_3v3: regulator-vcc3v3 {
55 compatible = "regulator-fixed";
57 regulator-name = "VCC3V3";
58 regulator-min-microvolt = <3300000>;
59 regulator-max-microvolt = <3300000>;
61 vin-supply = <&vcc_5v>;
64 vcc_5v: regulator-vcc5v {
65 compatible = "regulator-fixed";
67 regulator-name = "VCC5V";
68 regulator-min-microvolt = <5000000>;
69 regulator-max-microvolt = <5000000>;
75 vddee: regulator-vddee {
76 compatible = "pwm-regulator";
78 regulator-name = "VDDEE";
79 regulator-min-microvolt = <860000>;
80 regulator-max-microvolt = <1140000>;
82 vin-supply = <&vcc_5v>;
84 pwms = <&pwm_cd 1 1148 0>;
85 pwm-dutycycle-range = <100 0>;
99 pinctrl-0 = <ð_rmii_pins>;
100 pinctrl-names = "default";
102 phy-handle = <ð_phy0>;
106 compatible = "snps,dwmac-mdio";
107 #address-cells = <1>;
110 eth_phy0: ethernet-phy@0 {
111 /* IC Plus IP101A/G (0x02430c54) */
114 reset-assert-us = <10000>;
115 reset-deassert-us = <10000>;
116 reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
118 icplus,select-interrupt;
119 interrupt-parent = <&gpio_intc>;
121 interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
127 mali-supply = <&vddee>;
132 vref-supply = <&vcc_1v8>;
138 pinctrl-0 = <&sd_b_pins>;
139 pinctrl-names = "default";
142 sd_card_slot: slot@1 {
143 compatible = "mmc-slot";
153 cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
155 vmmc-supply = <&vcc_3v3>;
161 pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
162 pinctrl-names = "default";
163 clocks = <&xtal>, <&xtal>;
164 clock-names = "clkin0", "clkin1";
169 pinctrl-0 = <&uart_ao_a_pins>;
170 pinctrl-names = "default";