arch/arm/boot/dts/exynos4412-midas.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Samsung's Exynos4412 based Trats 2 board device tree source
   4  *
   5  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
   6  *              http://www.samsung.com
   7  *
   8  * Device tree source file for Samsung's Trats 2 board which is based on
   9  * Samsung's Exynos4412 SoC.
  10  */
  11
  12 /dts-v1/;
  13 #include "exynos4412.dtsi"
  14 #include "exynos4412-ppmu-common.dtsi"
  15 #include <dt-bindings/gpio/gpio.h>
  16 #include <dt-bindings/input/input.h>
  17 #include <dt-bindings/interrupt-controller/irq.h>
  18 #include <dt-bindings/clock/maxim,max77686.h>
  19 #include <dt-bindings/pinctrl/samsung.h>
  20
  21 / {
  22         compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
  23
  24         aliases {
  25                 i2c11 = &i2c_max77693;
  26                 i2c12 = &i2c_max77693_fuel;
  27         };
  28
  29         chosen {
  30                 stdout-path = &serial_2;
  31         };
  32
  33         firmware@204f000 {
  34                 compatible = "samsung,secure-firmware";
  35                 reg = <0x0204F000 0x1000>;
  36         };
  37
  38         fixed-rate-clocks {
  39                 xxti {
  40                         compatible = "samsung,clock-xxti", "fixed-clock";
  41                         clock-frequency = <0>;
  42                 };
  43
  44                 xusbxti {
  45                         compatible = "samsung,clock-xusbxti", "fixed-clock";
  46                         clock-frequency = <24000000>;
  47                 };
  48         };
  49
  50         cam_io_reg: voltage-regulator-1 {
  51                 compatible = "regulator-fixed";
  52                 regulator-name = "CAM_SENSOR_A";
  53                 regulator-min-microvolt = <2800000>;
  54                 regulator-max-microvolt = <2800000>;
  55                 enable-active-high;
  56                 status = "disabled";
  57         };
  58
  59         cam_af_reg: voltage-regulator-2 {
  60                 compatible = "regulator-fixed";
  61                 regulator-name = "CAM_AF";
  62                 regulator-min-microvolt = <2800000>;
  63                 regulator-max-microvolt = <2800000>;
  64                 enable-active-high;
  65                 status = "disabled";
  66         };
  67
  68         vsil12: voltage-regulator-3 {
  69                 compatible = "regulator-fixed";
  70                 regulator-name = "VSIL_1.2V";
  71                 regulator-min-microvolt = <1200000>;
  72                 regulator-max-microvolt = <1200000>;
  73                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
  74                 enable-active-high;
  75                 vin-supply = <&buck7_reg>;
  76         };
  77
  78         vcc33mhl: voltage-regulator-4 {
  79                 compatible = "regulator-fixed";
  80                 regulator-name = "VCC_3.3_MHL";
  81                 regulator-min-microvolt = <3300000>;
  82                 regulator-max-microvolt = <3300000>;
  83                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
  84                 enable-active-high;
  85         };
  86
  87         vcc18mhl: voltage-regulator-5 {
  88                 compatible = "regulator-fixed";
  89                 regulator-name = "VCC_1.8_MHL";
  90                 regulator-min-microvolt = <1800000>;
  91                 regulator-max-microvolt = <1800000>;
  92                 gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
  93                 enable-active-high;
  94         };
  95
  96         touchkey_reg: voltage-regulator-6 {
  97                 compatible = "regulator-fixed";
  98                 regulator-name = "LED_VDD_3.3V";
  99                 regulator-min-microvolt = <3300000>;
 100                 regulator-max-microvolt = <3300000>;
 101                 enable-active-high;
 102                 status = "disabled";
 103         };
 104
 105         gpio-keys {
 106                 compatible = "gpio-keys";
 107                 pinctrl-names = "default";
 108                 pinctrl-0 = <&gpio_keys>;
 109
 110                 key-down {
 111                         gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
 112                         linux,code = <114>;
 113                         label = "volume down";
 114                         debounce-interval = <10>;
 115                 };
 116
 117                 key-up {
 118                         gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
 119                         linux,code = <115>;
 120                         label = "volume up";
 121                         debounce-interval = <10>;
 122                 };
 123
 124                 key-power {
 125                         gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 126                         linux,code = <116>;
 127                         label = "power";
 128                         debounce-interval = <10>;
 129                         wakeup-source;
 130                 };
 131
 132                 key-ok {
 133                         gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
 134                         linux,code = <139>;
 135                         label = "ok";
 136                         debounce-interval = <10>;
 137                         wakeup-source;
 138                 };
 139         };
 140
 141         i2c_max77693: i2c-gpio-1 {
 142                 compatible = "i2c-gpio";
 143                 sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 144                 scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 145                 i2c-gpio,delay-us = <2>;
 146                 #address-cells = <1>;
 147                 #size-cells = <0>;
 148                 status = "okay";
 149
 150                 max77693@66 {
 151                         compatible = "maxim,max77693";
 152                         interrupt-parent = <&gpx1>;
 153                         interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 154                         pinctrl-names = "default";
 155                         pinctrl-0 = <&max77693_irq>;
 156                         reg = <0x66>;
 157
 158                         regulators {
 159                                 esafeout1_reg: ESAFEOUT1 {
 160                                         regulator-name = "ESAFEOUT1";
 161                                 };
 162                                 esafeout2_reg: ESAFEOUT2 {
 163                                         regulator-name = "ESAFEOUT2";
 164                                 };
 165                                 charger_reg: CHARGER {
 166                                         regulator-name = "CHARGER";
 167                                         regulator-min-microamp = <60000>;
 168                                         regulator-max-microamp = <2580000>;
 169                                 };
 170                         };
 171
 172                         max77693_haptic {
 173                                 compatible = "maxim,max77693-haptic";
 174                                 haptic-supply = <&ldo26_reg>;
 175                                 pwms = <&pwm 0 38022 0>;
 176                         };
 177
 178                         charger {
 179                                 compatible = "maxim,max77693-charger";
 180
 181                                 maxim,constant-microvolt = <4350000>;
 182                                 maxim,min-system-microvolt = <3600000>;
 183                                 maxim,thermal-regulation-celsius = <100>;
 184                                 maxim,battery-overcurrent-microamp = <3500000>;
 185                                 maxim,charge-input-threshold-microvolt = <4300000>;
 186                         };
 187                 };
 188         };
 189
 190         i2c_max77693_fuel: i2c-gpio-3 {
 191                 compatible = "i2c-gpio";
 192                 sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 193                 scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 194                 i2c-gpio,delay-us = <2>;
 195                 #address-cells = <1>;
 196                 #size-cells = <0>;
 197                 status = "okay";
 198
 199                 max77693-fuel-gauge@36 {
 200                         compatible = "maxim,max17047";
 201                         interrupt-parent = <&gpx2>;
 202                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 203                         pinctrl-names = "default";
 204                         pinctrl-0 = <&max77693_fuel_irq>;
 205                         reg = <0x36>;
 206
 207                         maxim,over-heat-temp = <700>;
 208                         maxim,over-volt = <4500>;
 209                 };
 210         };
 211
 212         i2c-gpio-4 {
 213                 compatible = "i2c-gpio";
 214                 sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 215                 scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 216                 i2c-gpio,delay-us = <2>;
 217                 #address-cells = <1>;
 218                 #size-cells = <0>;
 219
 220                 touchkey@20 {
 221                         compatible = "cypress,midas-touchkey";
 222                         reg = <0x20>;
 223                         vdd-supply = <&touchkey_reg>;
 224                         vcc-supply = <&ldo5_reg>;
 225                         interrupt-parent = <&gpj0>;
 226                         interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
 227                         linux,keycodes = <KEY_BACK KEY_MENU>;
 228                 };
 229         };
 230
 231         i2c-mhl {
 232                 compatible = "i2c-gpio";
 233                 sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 234                 scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 235                 i2c-gpio,delay-us = <100>;
 236                 #address-cells = <1>;
 237                 #size-cells = <0>;
 238
 239                 pinctrl-0 = <&i2c_mhl_bus>;
 240                 pinctrl-names = "default";
 241                 status = "okay";
 242
 243                 sii9234: hdmi-bridge@39 {
 244                         compatible = "sil,sii9234";
 245                         avcc33-supply = <&vcc33mhl>;
 246                         iovcc18-supply = <&vcc18mhl>;
 247                         avcc12-supply = <&vsil12>;
 248                         cvcc12-supply = <&vsil12>;
 249                         reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
 250                         interrupt-parent = <&gpf3>;
 251                         interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 252                         reg = <0x39>;
 253
 254                         port {
 255                                 mhl_to_hdmi: endpoint {
 256                                         remote-endpoint = <&hdmi_to_mhl>;
 257                                 };
 258                         };
 259                 };
 260         };
 261
 262         wlan_pwrseq: sdhci3-pwrseq {
 263                 compatible = "mmc-pwrseq-simple";
 264                 reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>;
 265                 clocks = <&max77686 MAX77686_CLK_PMIC>;
 266                 clock-names = "ext_clock";
 267         };
 268
 269         sound {
 270                 compatible = "samsung,trats2-audio";
 271                 samsung,i2s-controller = <&i2s0>;
 272                 samsung,model = "Trats2";
 273                 samsung,audio-codec = <&wm1811>;
 274                 samsung,audio-routing =
 275                         "SPK", "SPKOUTLN",
 276                         "SPK", "SPKOUTLP",
 277                         "SPK", "SPKOUTRN",
 278                         "SPK", "SPKOUTRP";
 279         };
 280
 281         thermistor-ap {
 282                 compatible = "murata,ncp15wb473";
 283                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 284                 pullup-ohm = <100000>;   /* 100K */
 285                 pulldown-ohm = <100000>; /* 100K */
 286                 io-channels = <&adc 1>;  /* AP temperature */
 287         };
 288
 289         thermistor-battery {
 290                 compatible = "murata,ncp15wb473";
 291                 pullup-uv = <1800000>;   /* VCC_1.8V_AP */
 292                 pullup-ohm = <100000>;   /* 100K */
 293                 pulldown-ohm = <100000>; /* 100K */
 294                 io-channels = <&adc 2>;  /* Battery temperature */
 295         };
 296
 297         thermal-zones {
 298                 cpu_thermal: cpu-thermal {
 299                         cooling-maps {
 300                                 map0 {
 301                                      /* Corresponds to 800MHz at freq_table */
 302                                      cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
 303                                                       <&cpu2 7 7>, <&cpu3 7 7>;
 304                                 };
 305                                 map1 {
 306                                      /* Corresponds to 200MHz at freq_table */
 307                                      cooling-device = <&cpu0 13 13>,
 308                                                       <&cpu1 13 13>,
 309                                                       <&cpu2 13 13>,
 310                                                       <&cpu3 13 13>;
 311                                };
 312                        };
 313                 };
 314         };
 315 };
 316
 317 &adc {
 318         vdd-supply = <&ldo3_reg>;
 319         status = "okay";
 320 };
 321
 322 &bus_dmc {
 323         devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
 324         vdd-supply = <&buck1_reg>;
 325         status = "okay";
 326 };
 327
 328 &bus_acp {
 329         devfreq = <&bus_dmc>;
 330         status = "okay";
 331 };
 332
 333 &bus_c2c {
 334         devfreq = <&bus_dmc>;
 335         status = "okay";
 336 };
 337
 338 &bus_leftbus {
 339         devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
 340         vdd-supply = <&buck3_reg>;
 341         status = "okay";
 342 };
 343
 344 &bus_rightbus {
 345         devfreq = <&bus_leftbus>;
 346         status = "okay";
 347 };
 348
 349 &bus_display {
 350         devfreq = <&bus_leftbus>;
 351         status = "okay";
 352 };
 353
 354 &bus_fsys {
 355         devfreq = <&bus_leftbus>;
 356         status = "okay";
 357 };
 358
 359 &bus_peri {
 360         devfreq = <&bus_leftbus>;
 361         status = "okay";
 362 };
 363
 364 &bus_mfc {
 365         devfreq = <&bus_leftbus>;
 366         status = "okay";
 367 };
 368
 369 &camera {
 370         pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 371         pinctrl-names = "default";
 372         status = "okay";
 373         assigned-clocks = <&clock CLK_MOUT_CAM0>,
 374                 <&clock CLK_MOUT_CAM1>;
 375         assigned-clock-parents = <&clock CLK_XUSBXTI>,
 376                 <&clock CLK_XUSBXTI>;
 377 };
 378
 379 &cpu0 {
 380         cpu0-supply = <&buck2_reg>;
 381 };
 382
 383 &csis_0 {
 384         status = "okay";
 385         vddcore-supply = <&ldo8_reg>;
 386         vddio-supply = <&ldo10_reg>;
 387         assigned-clocks = <&clock CLK_MOUT_CSIS0>,
 388                         <&clock CLK_SCLK_CSIS0>;
 389         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 390         assigned-clock-rates = <0>, <176000000>;
 391
 392         /* Camera C (3) MIPI CSI-2 (CSIS0) */
 393         port@3 {
 394                 reg = <3>;
 395                 csis0_ep: endpoint {
 396                         remote-endpoint = <&s5c73m3_ep>;
 397                         data-lanes = <1 2 3 4>;
 398                         samsung,csis-hs-settle = <12>;
 399                 };
 400         };
 401 };
 402
 403 &csis_1 {
 404         status = "okay";
 405         vddcore-supply = <&ldo8_reg>;
 406         vddio-supply = <&ldo10_reg>;
 407         assigned-clocks = <&clock CLK_MOUT_CSIS1>,
 408                         <&clock CLK_SCLK_CSIS1>;
 409         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 410         assigned-clock-rates = <0>, <176000000>;
 411
 412         /* Camera D (4) MIPI CSI-2 (CSIS1) */
 413         port@4 {
 414                 reg = <4>;
 415                 csis1_ep: endpoint {
 416                         remote-endpoint = <&is_s5k6a3_ep>;
 417                         data-lanes = <1>;
 418                         samsung,csis-hs-settle = <18>;
 419                         samsung,csis-wclk;
 420                 };
 421         };
 422 };
 423
 424 &dsi_0 {
 425         vddcore-supply = <&ldo8_reg>;
 426         vddio-supply = <&ldo10_reg>;
 427         samsung,burst-clock-frequency = <500000000>;
 428         samsung,esc-clock-frequency = <20000000>;
 429         samsung,pll-clock-frequency = <24000000>;
 430 };
 431
 432 &exynos_usbphy {
 433         vbus-supply = <&esafeout1_reg>;
 434         status = "okay";
 435 };
 436
 437 &fimc_0 {
 438         status = "okay";
 439         assigned-clocks = <&clock CLK_MOUT_FIMC0>,
 440                         <&clock CLK_SCLK_FIMC0>;
 441         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 442         assigned-clock-rates = <0>, <176000000>;
 443 };
 444
 445 &fimc_1 {
 446         status = "okay";
 447         assigned-clocks = <&clock CLK_MOUT_FIMC1>,
 448                         <&clock CLK_SCLK_FIMC1>;
 449         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 450         assigned-clock-rates = <0>, <176000000>;
 451 };
 452
 453 &fimc_2 {
 454         status = "okay";
 455         assigned-clocks = <&clock CLK_MOUT_FIMC2>,
 456                         <&clock CLK_SCLK_FIMC2>;
 457         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 458         assigned-clock-rates = <0>, <176000000>;
 459 };
 460
 461 &fimc_3 {
 462         status = "okay";
 463         assigned-clocks = <&clock CLK_MOUT_FIMC3>,
 464                         <&clock CLK_SCLK_FIMC3>;
 465         assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
 466         assigned-clock-rates = <0>, <176000000>;
 467 };
 468
 469 &fimc_is {
 470         pinctrl-0 = <&fimc_is_uart>;
 471         pinctrl-names = "default";
 472         status = "okay";
 473
 474         };
 475
 476 &fimc_lite_0 {
 477         status = "okay";
 478 };
 479
 480 &fimc_lite_1 {
 481         status = "okay";
 482 };
 483
 484 &fimd {
 485         status = "okay";
 486 };
 487
 488 &gpu {
 489         mali-supply = <&buck4_reg>;
 490         status = "okay";
 491 };
 492
 493 &hdmi {
 494         hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 495         pinctrl-names = "default";
 496         pinctrl-0 = <&hdmi_hpd>;
 497         vdd-supply = <&ldo3_reg>;
 498         vdd_osc-supply = <&ldo4_reg>;
 499         vdd_pll-supply = <&ldo3_reg>;
 500         ddc = <&i2c_5>;
 501         status = "okay";
 502
 503         ports {
 504                 #address-cells = <1>;
 505                 #size-cells = <0>;
 506
 507                 port@1 {
 508                         reg = <1>;
 509                         hdmi_to_mhl: endpoint {
 510                                 remote-endpoint = <&mhl_to_hdmi>;
 511                         };
 512                 };
 513         };
 514 };
 515
 516 &hsotg {
 517         vusb_d-supply = <&ldo15_reg>;
 518         vusb_a-supply = <&ldo12_reg>;
 519         dr_mode = "peripheral";
 520         status = "okay";
 521 };
 522
 523 &i2c_0 {
 524         samsung,i2c-sda-delay = <100>;
 525         samsung,i2c-slave-addr = <0x10>;
 526         samsung,i2c-max-bus-freq = <400000>;
 527         pinctrl-0 = <&i2c0_bus>;
 528         pinctrl-names = "default";
 529         status = "okay";
 530
 531         s5c73m3: s5c73m3@3c {
 532                 compatible = "samsung,s5c73m3";
 533                 reg = <0x3c>;
 534                 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
 535                 vdd-int-supply = <&buck9_reg>;
 536                 vddio-cis-supply = <&ldo9_reg>;
 537                 vddio-host-supply = <&ldo18_reg>;
 538                 vdd-af-supply = <&cam_af_reg>;
 539                 vdd-reg-supply = <&cam_io_reg>;
 540                 clock-frequency = <24000000>;
 541                 /* CAM_A_CLKOUT */
 542                 clocks = <&camera 0>;
 543                 clock-names = "cis_extclk";
 544                 status = "disabled";
 545                 port {
 546                         s5c73m3_ep: endpoint {
 547                                 remote-endpoint = <&csis0_ep>;
 548                                 data-lanes = <1 2 3 4>;
 549                         };
 550                 };
 551         };
 552 };
 553
 554 &i2c1_isp {
 555         pinctrl-0 = <&fimc_is_i2c1>;
 556         pinctrl-names = "default";
 557
 558         s5k6a3@10 {
 559                 compatible = "samsung,s5k6a3";
 560                 reg = <0x10>;
 561                 svdda-supply = <&cam_io_reg>;
 562                 svddio-supply = <&ldo19_reg>;
 563                 afvdd-supply = <&ldo19_reg>;
 564                 clock-frequency = <24000000>;
 565                 /* CAM_B_CLKOUT */
 566                 clocks = <&camera 1>;
 567                 clock-names = "extclk";
 568                 samsung,camclk-out = <1>;
 569                 gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
 570
 571                 port {
 572                         is_s5k6a3_ep: endpoint {
 573                                 remote-endpoint = <&csis1_ep>;
 574                                 data-lanes = <1>;
 575                         };
 576                 };
 577         };
 578 };
 579
 580 &i2c_3 {
 581         samsung,i2c-sda-delay = <100>;
 582         samsung,i2c-slave-addr = <0x10>;
 583         samsung,i2c-max-bus-freq = <400000>;
 584         pinctrl-0 = <&i2c3_bus>;
 585         pinctrl-names = "default";
 586         status = "okay";
 587 };
 588
 589 &i2c_4 {
 590         samsung,i2c-sda-delay = <100>;
 591         samsung,i2c-slave-addr = <0x10>;
 592         samsung,i2c-max-bus-freq = <100000>;
 593         pinctrl-0 = <&i2c4_bus>;
 594         pinctrl-names = "default";
 595         status = "okay";
 596
 597         wm1811: wm1811@1a {
 598                 compatible = "wlf,wm1811";
 599                 reg = <0x1a>;
 600                 clocks = <&pmu_system_controller 0>;
 601                 clock-names = "MCLK1";
 602                 DCVDD-supply = <&ldo3_reg>;
 603                 DBVDD1-supply = <&ldo3_reg>;
 604                 wlf,ldo1ena = <&gpj0 4 0>;
 605         };
 606 };
 607
 608 &i2c_5 {
 609         status = "okay";
 610 };
 611
 612 &i2c_7 {
 613         samsung,i2c-sda-delay = <100>;
 614         samsung,i2c-slave-addr = <0x10>;
 615         samsung,i2c-max-bus-freq = <100000>;
 616         pinctrl-0 = <&i2c7_bus>;
 617         pinctrl-names = "default";
 618         status = "okay";
 619
 620         max77686: max77686_pmic@9 {
 621                 compatible = "maxim,max77686";
 622                 interrupt-parent = <&gpx0>;
 623                 interrupts = <7 IRQ_TYPE_NONE>;
 624                 pinctrl-0 = <&max77686_irq>;
 625                 pinctrl-names = "default";
 626                 reg = <0x09>;
 627                 #clock-cells = <1>;
 628
 629                 voltage-regulators {
 630                         ldo1_reg: LDO1 {
 631                                 regulator-name = "VALIVE_1.0V_AP";
 632                                 regulator-min-microvolt = <1000000>;
 633                                 regulator-max-microvolt = <1000000>;
 634                                 regulator-always-on;
 635                         };
 636
 637                         ldo2_reg: LDO2 {
 638                                 regulator-name = "VM1M2_1.2V_AP";
 639                                 regulator-min-microvolt = <1200000>;
 640                                 regulator-max-microvolt = <1200000>;
 641                                 regulator-always-on;
 642                                 regulator-state-mem {
 643                                         regulator-on-in-suspend;
 644                                 };
 645                         };
 646
 647                         ldo3_reg: LDO3 {
 648                                 regulator-name = "VCC_1.8V_AP";
 649                                 regulator-min-microvolt = <1800000>;
 650                                 regulator-max-microvolt = <1800000>;
 651                                 regulator-always-on;
 652                         };
 653
 654                         ldo4_reg: LDO4 {
 655                                 regulator-name = "VCC_2.8V_AP";
 656                                 regulator-min-microvolt = <2800000>;
 657                                 regulator-max-microvolt = <2800000>;
 658                                 regulator-always-on;
 659                         };
 660
 661                         ldo5_reg: LDO5 {
 662                                 regulator-name = "VCC_1.8V_IO";
 663                                 regulator-min-microvolt = <1800000>;
 664                                 regulator-max-microvolt = <1800000>;
 665                                 regulator-always-on;
 666                         };
 667
 668                         ldo6_reg: LDO6 {
 669                                 regulator-name = "VMPLL_1.0V_AP";
 670                                 regulator-min-microvolt = <1000000>;
 671                                 regulator-max-microvolt = <1000000>;
 672                                 regulator-always-on;
 673                                 regulator-state-mem {
 674                                         regulator-on-in-suspend;
 675                                 };
 676                         };
 677
 678                         ldo7_reg: LDO7 {
 679                                 regulator-name = "VPLL_1.0V_AP";
 680                                 regulator-min-microvolt = <1000000>;
 681                                 regulator-max-microvolt = <1000000>;
 682                                 regulator-always-on;
 683                                 regulator-state-mem {
 684                                         regulator-on-in-suspend;
 685                                 };
 686                         };
 687
 688                         ldo8_reg: LDO8 {
 689                                 regulator-name = "VMIPI_1.0V";
 690                                 regulator-min-microvolt = <1000000>;
 691                                 regulator-max-microvolt = <1000000>;
 692                                 regulator-state-mem {
 693                                         regulator-off-in-suspend;
 694                                 };
 695                         };
 696
 697                         ldo9_reg: LDO9 {
 698                                 regulator-name = "CAM_ISP_MIPI_1.2V";
 699                                 regulator-min-microvolt = <1200000>;
 700                                 regulator-max-microvolt = <1200000>;
 701                         };
 702
 703                         ldo10_reg: LDO10 {
 704                                 regulator-name = "VMIPI_1.8V";
 705                                 regulator-min-microvolt = <1800000>;
 706                                 regulator-max-microvolt = <1800000>;
 707                                 regulator-state-mem {
 708                                         regulator-off-in-suspend;
 709                                 };
 710                         };
 711
 712                         ldo11_reg: LDO11 {
 713                                 regulator-name = "VABB1_1.95V";
 714                                 regulator-min-microvolt = <1950000>;
 715                                 regulator-max-microvolt = <1950000>;
 716                                 regulator-always-on;
 717                                 regulator-state-mem {
 718                                         regulator-off-in-suspend;
 719                                 };
 720                         };
 721
 722                         ldo12_reg: LDO12 {
 723                                 regulator-name = "VUOTG_3.0V";
 724                                 regulator-min-microvolt = <3000000>;
 725                                 regulator-max-microvolt = <3000000>;
 726                                 regulator-state-mem {
 727                                         regulator-off-in-suspend;
 728                                 };
 729                         };
 730
 731                         ldo13_reg: LDO13 {
 732                                 regulator-name = "NFC_AVDD_1.8V";
 733                                 regulator-min-microvolt = <1800000>;
 734                                 regulator-max-microvolt = <1800000>;
 735                         };
 736
 737                         ldo14_reg: LDO14 {
 738                                 regulator-name = "VABB2_1.95V";
 739                                 regulator-min-microvolt = <1950000>;
 740                                 regulator-max-microvolt = <1950000>;
 741                                 regulator-always-on;
 742                                 regulator-state-mem {
 743                                         regulator-off-in-suspend;
 744                                 };
 745                         };
 746
 747                         ldo15_reg: LDO15 {
 748                                 regulator-name = "VHSIC_1.0V";
 749                                 regulator-min-microvolt = <1000000>;
 750                                 regulator-max-microvolt = <1000000>;
 751                                 regulator-state-mem {
 752                                         regulator-on-in-suspend;
 753                                 };
 754                         };
 755
 756                         ldo16_reg: LDO16 {
 757                                 regulator-name = "VHSIC_1.8V";
 758                                 regulator-min-microvolt = <1800000>;
 759                                 regulator-max-microvolt = <1800000>;
 760                                 regulator-state-mem {
 761                                         regulator-on-in-suspend;
 762                                 };
 763                         };
 764
 765                         ldo17_reg: LDO17 {
 766                                 regulator-name = "CAM_SENSOR_CORE_1.2V";
 767                                 regulator-min-microvolt = <1200000>;
 768                                 regulator-max-microvolt = <1200000>;
 769                         };
 770
 771                         ldo18_reg: LDO18 {
 772                                 regulator-name = "CAM_ISP_SEN_IO_1.8V";
 773                                 regulator-min-microvolt = <1800000>;
 774                                 regulator-max-microvolt = <1800000>;
 775                         };
 776
 777                         ldo19_reg: LDO19 {
 778                                 regulator-name = "VT_CAM_1.8V";
 779                                 regulator-min-microvolt = <1800000>;
 780                                 regulator-max-microvolt = <1800000>;
 781                         };
 782
 783                         ldo20_reg: LDO20 {
 784                                 regulator-name = "VDDQ_PRE_1.8V";
 785                                 regulator-min-microvolt = <1800000>;
 786                                 regulator-max-microvolt = <1800000>;
 787                         };
 788
 789                         ldo21_reg: LDO21 {
 790                                 regulator-name = "VTF_2.8V";
 791                                 regulator-min-microvolt = <2800000>;
 792                                 regulator-max-microvolt = <2800000>;
 793                                 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 794                         };
 795
 796                         ldo22_reg: LDO22 {
 797                                 regulator-name = "VMEM_VDD_2.8V";
 798                                 regulator-min-microvolt = <2800000>;
 799                                 regulator-max-microvolt = <2800000>;
 800                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 801                         };
 802
 803                         ldo23_reg: LDO23 {
 804                                 regulator-name = "TSP_AVDD_3.3V";
 805                                 regulator-min-microvolt = <3300000>;
 806                                 regulator-max-microvolt = <3300000>;
 807                         };
 808
 809                         ldo24_reg: LDO24 {
 810                                 regulator-name = "TSP_VDD_1.8V";
 811                                 regulator-min-microvolt = <1800000>;
 812                                 regulator-max-microvolt = <1800000>;
 813                         };
 814
 815                         ldo25_reg: LDO25 {
 816                                 regulator-name = "LDO25";
 817                         };
 818
 819                         ldo26_reg: LDO26 {
 820                                 regulator-name = "MOTOR_VCC_3.0V";
 821                                 regulator-min-microvolt = <3000000>;
 822                                 regulator-max-microvolt = <3000000>;
 823                         };
 824
 825                         buck1_reg: BUCK1 {
 826                                 regulator-name = "VDD_MIF";
 827                                 regulator-min-microvolt = <850000>;
 828                                 regulator-max-microvolt = <1100000>;
 829                                 regulator-always-on;
 830                                 regulator-boot-on;
 831                                 regulator-state-mem {
 832                                         regulator-off-in-suspend;
 833                                 };
 834                         };
 835
 836                         buck2_reg: BUCK2 {
 837                                 regulator-name = "VDD_ARM";
 838                                 regulator-min-microvolt = <850000>;
 839                                 regulator-max-microvolt = <1500000>;
 840                                 regulator-always-on;
 841                                 regulator-boot-on;
 842                                 regulator-state-mem {
 843                                         regulator-on-in-suspend;
 844                                 };
 845                         };
 846
 847                         buck3_reg: BUCK3 {
 848                                 regulator-name = "VDD_INT";
 849                                 regulator-min-microvolt = <850000>;
 850                                 regulator-max-microvolt = <1150000>;
 851                                 regulator-always-on;
 852                                 regulator-boot-on;
 853                                 regulator-state-mem {
 854                                         regulator-off-in-suspend;
 855                                 };
 856                         };
 857
 858                         buck4_reg: BUCK4 {
 859                                 regulator-name = "VDD_G3D";
 860                                 regulator-min-microvolt = <850000>;
 861                                 regulator-max-microvolt = <1150000>;
 862                                 regulator-boot-on;
 863                                 regulator-state-mem {
 864                                         regulator-off-in-suspend;
 865                                 };
 866                         };
 867
 868                         buck5_reg: BUCK5 {
 869                                 regulator-name = "VMEM_1.2V_AP";
 870                                 regulator-min-microvolt = <1200000>;
 871                                 regulator-max-microvolt = <1200000>;
 872                                 regulator-always-on;
 873                         };
 874
 875                         buck6_reg: BUCK6 {
 876                                 regulator-name = "VCC_SUB_1.35V";
 877                                 regulator-min-microvolt = <1350000>;
 878                                 regulator-max-microvolt = <1350000>;
 879                                 regulator-always-on;
 880                         };
 881
 882                         buck7_reg: BUCK7 {
 883                                 regulator-name = "VCC_SUB_2.0V";
 884                                 regulator-min-microvolt = <2000000>;
 885                                 regulator-max-microvolt = <2000000>;
 886                                 regulator-always-on;
 887                         };
 888
 889                         buck8_reg: BUCK8 {
 890                                 regulator-name = "VMEM_VDDF_3.0V";
 891                                 regulator-min-microvolt = <2850000>;
 892                                 regulator-max-microvolt = <2850000>;
 893                                 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 894                         };
 895
 896                         buck9_reg: BUCK9 {
 897                                 regulator-name = "CAM_ISP_CORE_1.2V";
 898                                 regulator-min-microvolt = <1000000>;
 899                                 regulator-max-microvolt = <1200000>;
 900                         };
 901                 };
 902         };
 903 };
 904
 905 &i2c_8 {
 906         status = "okay";
 907 };
 908
 909 &i2s0 {
 910         pinctrl-0 = <&i2s0_bus>;
 911         pinctrl-names = "default";
 912         status = "okay";
 913 };
 914
 915 &mixer {
 916         status = "okay";
 917 };
 918
 919 &mshc_0 {
 920         broken-cd;
 921         non-removable;
 922         card-detect-delay = <200>;
 923         vmmc-supply = <&ldo22_reg>;
 924         clock-frequency = <400000000>;
 925         samsung,dw-mshc-ciu-div = <0>;
 926         samsung,dw-mshc-sdr-timing = <2 3>;
 927         samsung,dw-mshc-ddr-timing = <1 2>;
 928         pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 929         pinctrl-names = "default";
 930         status = "okay";
 931         bus-width = <8>;
 932         cap-mmc-highspeed;
 933 };
 934
 935 &pmu_system_controller {
 936         assigned-clocks = <&pmu_system_controller 0>;
 937         assigned-clock-parents =  <&clock CLK_XUSBXTI>;
 938 };
 939
 940 &pinctrl_0 {
 941         pinctrl-names = "default";
 942         pinctrl-0 = <&sleep0>;
 943
 944         mhl_int: mhl-int {
 945                 samsung,pins = "gpf3-5";
 946                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 947         };
 948
 949         i2c_mhl_bus: i2c-mhl-bus {
 950                 samsung,pins = "gpf0-4", "gpf0-6";
 951                 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 952                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 953                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 954         };
 955
 956         sleep0: sleep-states {
 957                 PIN_SLP(gpa0-0, INPUT, NONE);
 958                 PIN_SLP(gpa0-1, OUT0, NONE);
 959                 PIN_SLP(gpa0-2, INPUT, NONE);
 960                 PIN_SLP(gpa0-3, INPUT, UP);
 961                 PIN_SLP(gpa0-4, INPUT, NONE);
 962                 PIN_SLP(gpa0-5, INPUT, DOWN);
 963                 PIN_SLP(gpa0-6, INPUT, DOWN);
 964                 PIN_SLP(gpa0-7, INPUT, UP);
 965
 966                 PIN_SLP(gpa1-0, INPUT, DOWN);
 967                 PIN_SLP(gpa1-1, INPUT, DOWN);
 968                 PIN_SLP(gpa1-2, INPUT, DOWN);
 969                 PIN_SLP(gpa1-3, INPUT, DOWN);
 970                 PIN_SLP(gpa1-4, INPUT, DOWN);
 971                 PIN_SLP(gpa1-5, INPUT, DOWN);
 972
 973                 PIN_SLP(gpb-0, INPUT, NONE);
 974                 PIN_SLP(gpb-1, INPUT, NONE);
 975                 PIN_SLP(gpb-2, INPUT, NONE);
 976                 PIN_SLP(gpb-3, INPUT, NONE);
 977                 PIN_SLP(gpb-4, INPUT, DOWN);
 978                 PIN_SLP(gpb-5, INPUT, UP);
 979                 PIN_SLP(gpb-6, INPUT, DOWN);
 980                 PIN_SLP(gpb-7, INPUT, DOWN);
 981
 982                 PIN_SLP(gpc0-0, INPUT, DOWN);
 983                 PIN_SLP(gpc0-1, INPUT, DOWN);
 984                 PIN_SLP(gpc0-2, INPUT, DOWN);
 985                 PIN_SLP(gpc0-3, INPUT, DOWN);
 986                 PIN_SLP(gpc0-4, INPUT, DOWN);
 987
 988                 PIN_SLP(gpc1-0, INPUT, NONE);
 989                 PIN_SLP(gpc1-1, PREV, NONE);
 990                 PIN_SLP(gpc1-2, INPUT, NONE);
 991                 PIN_SLP(gpc1-3, INPUT, NONE);
 992                 PIN_SLP(gpc1-4, INPUT, NONE);
 993
 994                 PIN_SLP(gpd0-0, INPUT, DOWN);
 995                 PIN_SLP(gpd0-1, INPUT, DOWN);
 996                 PIN_SLP(gpd0-2, INPUT, NONE);
 997                 PIN_SLP(gpd0-3, INPUT, NONE);
 998
 999                 PIN_SLP(gpd1-0, INPUT, DOWN);
1000                 PIN_SLP(gpd1-1, INPUT, DOWN);
1001                 PIN_SLP(gpd1-2, INPUT, NONE);
1002                 PIN_SLP(gpd1-3, INPUT, NONE);
1003
1004                 PIN_SLP(gpf0-0, INPUT, NONE);
1005                 PIN_SLP(gpf0-1, INPUT, NONE);
1006                 PIN_SLP(gpf0-2, INPUT, DOWN);
1007                 PIN_SLP(gpf0-3, INPUT, DOWN);
1008                 PIN_SLP(gpf0-4, INPUT, NONE);
1009                 PIN_SLP(gpf0-5, INPUT, DOWN);
1010                 PIN_SLP(gpf0-6, INPUT, NONE);
1011                 PIN_SLP(gpf0-7, INPUT, DOWN);
1012
1013                 PIN_SLP(gpf1-0, INPUT, DOWN);
1014                 PIN_SLP(gpf1-1, INPUT, DOWN);
1015                 PIN_SLP(gpf1-2, INPUT, DOWN);
1016                 PIN_SLP(gpf1-3, INPUT, DOWN);
1017                 PIN_SLP(gpf1-4, INPUT, NONE);
1018                 PIN_SLP(gpf1-5, INPUT, NONE);
1019                 PIN_SLP(gpf1-6, INPUT, DOWN);
1020                 PIN_SLP(gpf1-7, PREV, NONE);
1021
1022                 PIN_SLP(gpf2-0, PREV, NONE);
1023                 PIN_SLP(gpf2-1, INPUT, DOWN);
1024                 PIN_SLP(gpf2-2, INPUT, DOWN);
1025                 PIN_SLP(gpf2-3, INPUT, DOWN);
1026                 PIN_SLP(gpf2-4, INPUT, DOWN);
1027                 PIN_SLP(gpf2-5, INPUT, DOWN);
1028                 PIN_SLP(gpf2-6, INPUT, NONE);
1029                 PIN_SLP(gpf2-7, INPUT, NONE);
1030
1031                 PIN_SLP(gpf3-0, INPUT, NONE);
1032                 PIN_SLP(gpf3-1, PREV, NONE);
1033                 PIN_SLP(gpf3-2, PREV, NONE);
1034                 PIN_SLP(gpf3-3, PREV, NONE);
1035                 PIN_SLP(gpf3-4, OUT1, NONE);
1036                 PIN_SLP(gpf3-5, INPUT, DOWN);
1037
1038                 PIN_SLP(gpj0-0, PREV, NONE);
1039                 PIN_SLP(gpj0-1, PREV, NONE);
1040                 PIN_SLP(gpj0-2, PREV, NONE);
1041                 PIN_SLP(gpj0-3, INPUT, DOWN);
1042                 PIN_SLP(gpj0-4, PREV, NONE);
1043                 PIN_SLP(gpj0-5, PREV, NONE);
1044                 PIN_SLP(gpj0-6, INPUT, DOWN);
1045                 PIN_SLP(gpj0-7, INPUT, DOWN);
1046
1047                 PIN_SLP(gpj1-0, INPUT, DOWN);
1048                 PIN_SLP(gpj1-1, PREV, NONE);
1049                 PIN_SLP(gpj1-2, PREV, NONE);
1050                 PIN_SLP(gpj1-3, INPUT, DOWN);
1051                 PIN_SLP(gpj1-4, INPUT, DOWN);
1052         };
1053 };
1054
1055 &pinctrl_1 {
1056         pinctrl-names = "default";
1057         pinctrl-0 = <&sleep1>;
1058
1059         gpio_keys: gpio-keys {
1060                 samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
1061                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1062         };
1063
1064         max77686_irq: max77686-irq {
1065                 samsung,pins = "gpx0-7";
1066                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1067         };
1068
1069         max77693_irq: max77693-irq {
1070                 samsung,pins = "gpx1-5";
1071                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1072         };
1073
1074         max77693_fuel_irq: max77693-fuel-irq {
1075                 samsung,pins = "gpx2-3";
1076                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1077         };
1078
1079         sdhci2_cd: sdhci2-cd-irq {
1080                 samsung,pins = "gpx3-4";
1081                 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1082         };
1083
1084         hdmi_hpd: hdmi-hpd {
1085                 samsung,pins = "gpx3-7";
1086                 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1087         };
1088
1089         sleep1: sleep-states {
1090                 PIN_SLP(gpk0-0, PREV, NONE);
1091                 PIN_SLP(gpk0-1, PREV, NONE);
1092                 PIN_SLP(gpk0-2, OUT0, NONE);
1093                 PIN_SLP(gpk0-3, PREV, NONE);
1094                 PIN_SLP(gpk0-4, PREV, NONE);
1095                 PIN_SLP(gpk0-5, PREV, NONE);
1096                 PIN_SLP(gpk0-6, PREV, NONE);
1097
1098                 PIN_SLP(gpk1-0, INPUT, DOWN);
1099                 PIN_SLP(gpk1-1, INPUT, DOWN);
1100                 PIN_SLP(gpk1-2, INPUT, DOWN);
1101                 PIN_SLP(gpk1-3, PREV, NONE);
1102                 PIN_SLP(gpk1-4, PREV, NONE);
1103                 PIN_SLP(gpk1-5, PREV, NONE);
1104                 PIN_SLP(gpk1-6, PREV, NONE);
1105
1106                 PIN_SLP(gpk2-0, INPUT, DOWN);
1107                 PIN_SLP(gpk2-1, INPUT, DOWN);
1108                 PIN_SLP(gpk2-2, INPUT, DOWN);
1109                 PIN_SLP(gpk2-3, INPUT, DOWN);
1110                 PIN_SLP(gpk2-4, INPUT, DOWN);
1111                 PIN_SLP(gpk2-5, INPUT, DOWN);
1112                 PIN_SLP(gpk2-6, INPUT, DOWN);
1113
1114                 PIN_SLP(gpk3-0, OUT0, NONE);
1115                 PIN_SLP(gpk3-1, INPUT, NONE);
1116                 PIN_SLP(gpk3-2, INPUT, DOWN);
1117                 PIN_SLP(gpk3-3, INPUT, NONE);
1118                 PIN_SLP(gpk3-4, INPUT, NONE);
1119                 PIN_SLP(gpk3-5, INPUT, NONE);
1120                 PIN_SLP(gpk3-6, INPUT, NONE);
1121
1122                 PIN_SLP(gpl0-0, INPUT, DOWN);
1123                 PIN_SLP(gpl0-1, INPUT, DOWN);
1124                 PIN_SLP(gpl0-2, INPUT, DOWN);
1125                 PIN_SLP(gpl0-3, INPUT, DOWN);
1126                 PIN_SLP(gpl0-4, PREV, NONE);
1127                 PIN_SLP(gpl0-6, PREV, NONE);
1128
1129                 PIN_SLP(gpl1-0, INPUT, DOWN);
1130                 PIN_SLP(gpl1-1, INPUT, DOWN);
1131                 PIN_SLP(gpl2-0, INPUT, DOWN);
1132                 PIN_SLP(gpl2-1, INPUT, DOWN);
1133                 PIN_SLP(gpl2-2, INPUT, DOWN);
1134                 PIN_SLP(gpl2-3, INPUT, DOWN);
1135                 PIN_SLP(gpl2-4, INPUT, DOWN);
1136                 PIN_SLP(gpl2-5, INPUT, DOWN);
1137                 PIN_SLP(gpl2-6, PREV, NONE);
1138                 PIN_SLP(gpl2-7, INPUT, DOWN);
1139
1140                 PIN_SLP(gpm0-0, INPUT, DOWN);
1141                 PIN_SLP(gpm0-1, INPUT, DOWN);
1142                 PIN_SLP(gpm0-2, INPUT, DOWN);
1143                 PIN_SLP(gpm0-3, INPUT, DOWN);
1144                 PIN_SLP(gpm0-4, INPUT, DOWN);
1145                 PIN_SLP(gpm0-5, INPUT, DOWN);
1146                 PIN_SLP(gpm0-6, INPUT, DOWN);
1147                 PIN_SLP(gpm0-7, INPUT, DOWN);
1148
1149                 PIN_SLP(gpm1-0, INPUT, DOWN);
1150                 PIN_SLP(gpm1-1, INPUT, DOWN);
1151                 PIN_SLP(gpm1-2, INPUT, NONE);
1152                 PIN_SLP(gpm1-3, INPUT, NONE);
1153                 PIN_SLP(gpm1-4, INPUT, NONE);
1154                 PIN_SLP(gpm1-5, INPUT, NONE);
1155                 PIN_SLP(gpm1-6, INPUT, DOWN);
1156
1157                 PIN_SLP(gpm2-0, INPUT, NONE);
1158                 PIN_SLP(gpm2-1, INPUT, NONE);
1159                 PIN_SLP(gpm2-2, INPUT, DOWN);
1160                 PIN_SLP(gpm2-3, INPUT, DOWN);
1161                 PIN_SLP(gpm2-4, INPUT, DOWN);
1162
1163                 PIN_SLP(gpm3-0, PREV, NONE);
1164                 PIN_SLP(gpm3-1, PREV, NONE);
1165                 PIN_SLP(gpm3-2, PREV, NONE);
1166                 PIN_SLP(gpm3-3, OUT1, NONE);
1167                 PIN_SLP(gpm3-4, INPUT, DOWN);
1168                 PIN_SLP(gpm3-5, INPUT, DOWN);
1169                 PIN_SLP(gpm3-6, INPUT, DOWN);
1170                 PIN_SLP(gpm3-7, INPUT, DOWN);
1171
1172                 PIN_SLP(gpm4-0, INPUT, DOWN);
1173                 PIN_SLP(gpm4-1, INPUT, DOWN);
1174                 PIN_SLP(gpm4-2, INPUT, DOWN);
1175                 PIN_SLP(gpm4-3, INPUT, DOWN);
1176                 PIN_SLP(gpm4-4, INPUT, DOWN);
1177                 PIN_SLP(gpm4-5, INPUT, DOWN);
1178                 PIN_SLP(gpm4-6, INPUT, DOWN);
1179                 PIN_SLP(gpm4-7, INPUT, DOWN);
1180
1181                 PIN_SLP(gpy0-0, INPUT, DOWN);
1182                 PIN_SLP(gpy0-1, INPUT, DOWN);
1183                 PIN_SLP(gpy0-2, INPUT, DOWN);
1184                 PIN_SLP(gpy0-3, INPUT, DOWN);
1185                 PIN_SLP(gpy0-4, INPUT, DOWN);
1186                 PIN_SLP(gpy0-5, INPUT, DOWN);
1187
1188                 PIN_SLP(gpy1-0, INPUT, DOWN);
1189                 PIN_SLP(gpy1-1, INPUT, DOWN);
1190                 PIN_SLP(gpy1-2, INPUT, DOWN);
1191                 PIN_SLP(gpy1-3, INPUT, DOWN);
1192
1193                 PIN_SLP(gpy2-0, PREV, NONE);
1194                 PIN_SLP(gpy2-1, INPUT, DOWN);
1195                 PIN_SLP(gpy2-2, INPUT, NONE);
1196                 PIN_SLP(gpy2-3, INPUT, NONE);
1197                 PIN_SLP(gpy2-4, INPUT, NONE);
1198                 PIN_SLP(gpy2-5, INPUT, NONE);
1199
1200                 PIN_SLP(gpy3-0, INPUT, DOWN);
1201                 PIN_SLP(gpy3-1, INPUT, DOWN);
1202                 PIN_SLP(gpy3-2, INPUT, DOWN);
1203                 PIN_SLP(gpy3-3, INPUT, DOWN);
1204                 PIN_SLP(gpy3-4, INPUT, DOWN);
1205                 PIN_SLP(gpy3-5, INPUT, DOWN);
1206                 PIN_SLP(gpy3-6, INPUT, DOWN);
1207                 PIN_SLP(gpy3-7, INPUT, DOWN);
1208
1209                 PIN_SLP(gpy4-0, INPUT, DOWN);
1210                 PIN_SLP(gpy4-1, INPUT, DOWN);
1211                 PIN_SLP(gpy4-2, INPUT, DOWN);
1212                 PIN_SLP(gpy4-3, INPUT, DOWN);
1213                 PIN_SLP(gpy4-4, INPUT, DOWN);
1214                 PIN_SLP(gpy4-5, INPUT, DOWN);
1215                 PIN_SLP(gpy4-6, INPUT, DOWN);
1216                 PIN_SLP(gpy4-7, INPUT, DOWN);
1217
1218                 PIN_SLP(gpy5-0, INPUT, DOWN);
1219                 PIN_SLP(gpy5-1, INPUT, DOWN);
1220                 PIN_SLP(gpy5-2, INPUT, DOWN);
1221                 PIN_SLP(gpy5-3, INPUT, DOWN);
1222                 PIN_SLP(gpy5-4, INPUT, DOWN);
1223                 PIN_SLP(gpy5-5, INPUT, DOWN);
1224                 PIN_SLP(gpy5-6, INPUT, DOWN);
1225                 PIN_SLP(gpy5-7, INPUT, DOWN);
1226
1227                 PIN_SLP(gpy6-0, INPUT, DOWN);
1228                 PIN_SLP(gpy6-1, INPUT, DOWN);
1229                 PIN_SLP(gpy6-2, INPUT, DOWN);
1230                 PIN_SLP(gpy6-3, INPUT, DOWN);
1231                 PIN_SLP(gpy6-4, INPUT, DOWN);
1232                 PIN_SLP(gpy6-5, INPUT, DOWN);
1233                 PIN_SLP(gpy6-6, INPUT, DOWN);
1234                 PIN_SLP(gpy6-7, INPUT, DOWN);
1235         };
1236 };
1237
1238 &pinctrl_2 {
1239         pinctrl-names = "default";
1240         pinctrl-0 = <&sleep2>;
1241
1242         sleep2: sleep-states {
1243                 PIN_SLP(gpz-0, INPUT, DOWN);
1244                 PIN_SLP(gpz-1, INPUT, DOWN);
1245                 PIN_SLP(gpz-2, INPUT, DOWN);
1246                 PIN_SLP(gpz-3, INPUT, DOWN);
1247                 PIN_SLP(gpz-4, INPUT, DOWN);
1248                 PIN_SLP(gpz-5, INPUT, DOWN);
1249                 PIN_SLP(gpz-6, INPUT, DOWN);
1250         };
1251 };
1252
1253 &pinctrl_3 {
1254         pinctrl-names = "default";
1255         pinctrl-0 = <&sleep3>;
1256
1257         sleep3: sleep-states {
1258                 PIN_SLP(gpv0-0, INPUT, DOWN);
1259                 PIN_SLP(gpv0-1, INPUT, DOWN);
1260                 PIN_SLP(gpv0-2, INPUT, DOWN);
1261                 PIN_SLP(gpv0-3, INPUT, DOWN);
1262                 PIN_SLP(gpv0-4, INPUT, DOWN);
1263                 PIN_SLP(gpv0-5, INPUT, DOWN);
1264                 PIN_SLP(gpv0-6, INPUT, DOWN);
1265                 PIN_SLP(gpv0-7, INPUT, DOWN);
1266
1267                 PIN_SLP(gpv1-0, INPUT, DOWN);
1268                 PIN_SLP(gpv1-1, INPUT, DOWN);
1269                 PIN_SLP(gpv1-2, INPUT, DOWN);
1270                 PIN_SLP(gpv1-3, INPUT, DOWN);
1271                 PIN_SLP(gpv1-4, INPUT, DOWN);
1272                 PIN_SLP(gpv1-5, INPUT, DOWN);
1273                 PIN_SLP(gpv1-6, INPUT, DOWN);
1274                 PIN_SLP(gpv1-7, INPUT, DOWN);
1275
1276                 PIN_SLP(gpv2-0, INPUT, DOWN);
1277                 PIN_SLP(gpv2-1, INPUT, DOWN);
1278                 PIN_SLP(gpv2-2, INPUT, DOWN);
1279                 PIN_SLP(gpv2-3, INPUT, DOWN);
1280                 PIN_SLP(gpv2-4, INPUT, DOWN);
1281                 PIN_SLP(gpv2-5, INPUT, DOWN);
1282                 PIN_SLP(gpv2-6, INPUT, DOWN);
1283                 PIN_SLP(gpv2-7, INPUT, DOWN);
1284
1285                 PIN_SLP(gpv3-0, INPUT, DOWN);
1286                 PIN_SLP(gpv3-1, INPUT, DOWN);
1287                 PIN_SLP(gpv3-2, INPUT, DOWN);
1288                 PIN_SLP(gpv3-3, INPUT, DOWN);
1289                 PIN_SLP(gpv3-4, INPUT, DOWN);
1290                 PIN_SLP(gpv3-5, INPUT, DOWN);
1291                 PIN_SLP(gpv3-6, INPUT, DOWN);
1292                 PIN_SLP(gpv3-7, INPUT, DOWN);
1293
1294                 PIN_SLP(gpv4-0, INPUT, DOWN);
1295         };
1296 };
1297
1298 &pwm {
1299         pinctrl-0 = <&pwm0_out>;
1300         pinctrl-names = "default";
1301         samsung,pwm-outputs = <0>;
1302         status = "okay";
1303 };
1304
1305 &rtc {
1306         status = "okay";
1307         clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
1308         clock-names = "rtc", "rtc_src";
1309 };
1310
1311 &sdhci_2 {
1312         bus-width = <4>;
1313         cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
1314         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
1315         pinctrl-names = "default";
1316         vmmc-supply = <&ldo21_reg>;
1317         status = "okay";
1318 };
1319
1320 &sdhci_3 {
1321         #address-cells = <1>;
1322         #size-cells = <0>;
1323         non-removable;
1324         bus-width = <4>;
1325
1326         mmc-pwrseq = <&wlan_pwrseq>;
1327         pinctrl-names = "default";
1328         pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
1329         status = "okay";
1330
1331         brcmf: wifi@1 {
1332                 reg = <1>;
1333                 compatible = "brcm,bcm4329-fmac";
1334                 interrupt-parent = <&gpx2>;
1335                 interrupts = <5 IRQ_TYPE_NONE>;
1336                 interrupt-names = "host-wake";
1337         };
1338 };
1339
1340 &serial_0 {
1341         status = "okay";
1342 };
1343
1344 &serial_1 {
1345         status = "okay";
1346 };
1347
1348 &serial_2 {
1349         status = "okay";
1350 };
1351
1352 &serial_3 {
1353         status = "okay";
1354 };
1355
1356 &spi_1 {
1357         pinctrl-names = "default";
1358         pinctrl-0 = <&spi1_bus>;
1359         cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1360         status = "okay";
1361
1362         s5c73m3_spi: s5c73m3@0 {
1363                 compatible = "samsung,s5c73m3";
1364                 spi-max-frequency = <50000000>;
1365                 reg = <0>;
1366                 controller-data {
1367                         samsung,spi-feedback-delay = <2>;
1368                 };
1369         };
1370 };
1371
1372 &tmu {
1373         vtmu-supply = <&ldo10_reg>;
1374         status = "okay";
1375 };