arch/arm/boot/dts/dm816x.dtsi

   1 /*
   2  * This file is licensed under the terms of the GNU General Public License
   3  * version 2.  This program is licensed "as is" without any warranty of any
   4  * kind, whether express or implied.
   5  */
   6
   7 #include <dt-bindings/bus/ti-sysc.h>
   8 #include <dt-bindings/clock/dm816.h>
   9 #include <dt-bindings/gpio/gpio.h>
  10 #include <dt-bindings/pinctrl/omap.h>
  11
  12 / {
  13         compatible = "ti,dm816";
  14         interrupt-parent = <&intc>;
  15         #address-cells = <1>;
  16         #size-cells = <1>;
  17         chosen { };
  18
  19         aliases {
  20                 i2c0 = &i2c1;
  21                 i2c1 = &i2c2;
  22                 serial0 = &uart1;
  23                 serial1 = &uart2;
  24                 serial2 = &uart3;
  25                 ethernet0 = &eth0;
  26                 ethernet1 = &eth1;
  27         };
  28
  29         cpus {
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32                 cpu@0 {
  33                         compatible = "arm,cortex-a8";
  34                         device_type = "cpu";
  35                         reg = <0>;
  36                 };
  37         };
  38
  39         pmu {
  40                 compatible = "arm,cortex-a8-pmu";
  41                 interrupts = <3>;
  42         };
  43
  44         /*
  45          * The soc node represents the soc top level view. It is used for IPs
  46          * that are not memory mapped in the MPU view or for the MPU itself.
  47          */
  48         soc {
  49                 compatible = "ti,omap-infra";
  50                 mpu {
  51                         compatible = "ti,omap3-mpu";
  52                         ti,hwmods = "mpu";
  53                 };
  54         };
  55
  56         /*
  57          * XXX: Use a flat representation of the dm816x interconnect.
  58          * The real dm816x interconnect network is quite complex. Since
  59          * it will not bring real advantage to represent that in DT
  60          * for the moment, just use a fake OCP bus entry to represent
  61          * the whole bus hierarchy.
  62          */
  63         ocp {
  64                 compatible = "simple-bus";
  65                 reg = <0x44000000 0x10000>;
  66                 interrupts = <9 10>;
  67                 #address-cells = <1>;
  68                 #size-cells = <1>;
  69                 ranges;
  70
  71                 prcm: prcm@48180000 {
  72                         compatible = "ti,dm816-prcm", "simple-bus";
  73                         reg = <0x48180000 0x4000>;
  74                         #address-cells = <1>;
  75                         #size-cells = <1>;
  76                         ranges = <0 0x48180000 0x4000>;
  77
  78                         prcm_clocks: clocks {
  79                                 #address-cells = <1>;
  80                                 #size-cells = <0>;
  81                         };
  82
  83                         prcm_clockdomains: clockdomains {
  84                         };
  85                 };
  86
  87                 scrm: scrm@48140000 {
  88                         compatible = "ti,dm816-scrm", "simple-bus";
  89                         reg = <0x48140000 0x21000>;
  90                         #address-cells = <1>;
  91                         #size-cells = <1>;
  92                         #pinctrl-cells = <1>;
  93                         ranges = <0 0x48140000 0x21000>;
  94
  95                         dm816x_pinmux: pinmux@800 {
  96                                 compatible = "pinctrl-single";
  97                                 reg = <0x800 0x50a>;
  98                                 #address-cells = <1>;
  99                                 #size-cells = <0>;
 100                                 #pinctrl-cells = <1>;
 101                                 pinctrl-single,register-width = <16>;
 102                                 pinctrl-single,function-mask = <0xf>;
 103                         };
 104
 105                         /* Device Configuration Registers */
 106                         scm_conf: syscon@600 {
 107                                 compatible = "syscon", "simple-bus";
 108                                 reg = <0x600 0x110>;
 109                                 #address-cells = <1>;
 110                                 #size-cells = <1>;
 111                                 ranges = <0 0x600 0x110>;
 112
 113                                 usb_phy0: usb-phy@20 {
 114                                         compatible = "ti,dm8168-usb-phy";
 115                                         reg = <0x20 0x8>;
 116                                         reg-names = "phy";
 117                                         clocks = <&main_fapll 6>;
 118                                         clock-names = "refclk";
 119                                         #phy-cells = <0>;
 120                                         syscon = <&scm_conf>;
 121                                 };
 122
 123                                 usb_phy1: usb-phy@28 {
 124                                         compatible = "ti,dm8168-usb-phy";
 125                                         reg = <0x28 0x8>;
 126                                         reg-names = "phy";
 127                                         clocks = <&main_fapll 6>;
 128                                         clock-names = "refclk";
 129                                         #phy-cells = <0>;
 130                                         syscon = <&scm_conf>;
 131                                 };
 132                         };
 133
 134                         scrm_clocks: clocks {
 135                                 #address-cells = <1>;
 136                                 #size-cells = <0>;
 137                         };
 138
 139                         scrm_clockdomains: clockdomains {
 140                         };
 141                 };
 142
 143                 target-module@49000000 {
 144                         compatible = "ti,sysc-omap4", "ti,sysc";
 145                         reg = <0x49000000 0x4>;
 146                         reg-names = "rev";
 147                         clocks = <&alwon_clkctrl DM816_TPCC_CLKCTRL 0>;
 148                         clock-names = "fck";
 149                         #address-cells = <1>;
 150                         #size-cells = <1>;
 151                         ranges = <0x0 0x49000000 0x10000>;
 152
 153                         edma: dma@0 {
 154                                 compatible = "ti,edma3-tpcc";
 155                                 reg = <0 0x10000>;
 156                                 reg-names = "edma3_cc";
 157                                 interrupts = <12 13 14>;
 158                                 interrupt-names = "edma3_ccint", "edma3_mperr",
 159                                                   "edma3_ccerrint";
 160                                 dma-requests = <64>;
 161                                 #dma-cells = <2>;
 162
 163                                 ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
 164                                            <&edma_tptc2 3>, <&edma_tptc3 0>;
 165
 166                                 ti,edma-memcpy-channels = <20 21>;
 167                         };
 168                 };
 169
 170                 target-module@49800000 {
 171                         compatible = "ti,sysc-omap4", "ti,sysc";
 172                         reg = <0x49800000 0x4>,
 173                               <0x49800010 0x4>;
 174                         reg-names = "rev", "sysc";
 175                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 176                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 177                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 178                                         <SYSC_IDLE_SMART>;
 179                         clocks = <&alwon_clkctrl DM816_TPTC0_CLKCTRL 0>;
 180                         clock-names = "fck";
 181                         #address-cells = <1>;
 182                         #size-cells = <1>;
 183                         ranges = <0x0 0x49800000 0x100000>;
 184
 185                         edma_tptc0: dma@0 {
 186                                 compatible = "ti,edma3-tptc";
 187                                 reg = <0 0x100000>;
 188                                 interrupts = <112>;
 189                                 interrupt-names = "edma3_tcerrint";
 190                         };
 191                 };
 192
 193                 target-module@49900000 {
 194                         compatible = "ti,sysc-omap4", "ti,sysc";
 195                         reg = <0x49900000 0x4>,
 196                               <0x49900010 0x4>;
 197                         reg-names = "rev", "sysc";
 198                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 199                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 200                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 201                                         <SYSC_IDLE_SMART>;
 202                         clocks = <&alwon_clkctrl DM816_TPTC1_CLKCTRL 0>;
 203                         clock-names = "fck";
 204                         #address-cells = <1>;
 205                         #size-cells = <1>;
 206                         ranges = <0x0 0x49900000 0x100000>;
 207
 208                         edma_tptc1: dma@0 {
 209                                 compatible = "ti,edma3-tptc";
 210                                 reg = <0 0x100000>;
 211                                 interrupts = <113>;
 212                                 interrupt-names = "edma3_tcerrint";
 213                         };
 214                 };
 215
 216                 target-module@49a00000 {
 217                         compatible = "ti,sysc-omap4", "ti,sysc";
 218                         reg = <0x49a00000 0x4>,
 219                               <0x49a00010 0x4>;
 220                         reg-names = "rev", "sysc";
 221                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 222                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 223                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 224                                         <SYSC_IDLE_SMART>;
 225                         clocks = <&alwon_clkctrl DM816_TPTC2_CLKCTRL 0>;
 226                         clock-names = "fck";
 227                         #address-cells = <1>;
 228                         #size-cells = <1>;
 229                         ranges = <0x0 0x49a00000 0x100000>;
 230
 231                         edma_tptc2: dma@0 {
 232                                 compatible = "ti,edma3-tptc";
 233                                 reg = <0 0x100000>;
 234                                 interrupts = <114>;
 235                                 interrupt-names = "edma3_tcerrint";
 236                         };
 237                 };
 238
 239                 target-module@49b00000 {
 240                         compatible = "ti,sysc-omap4", "ti,sysc";
 241                         reg = <0x49b00000 0x4>,
 242                               <0x49b00010 0x4>;
 243                         reg-names = "rev", "sysc";
 244                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 245                         ti,sysc-midle = <SYSC_IDLE_FORCE>;
 246                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 247                                         <SYSC_IDLE_SMART>;
 248                         clocks = <&alwon_clkctrl DM816_TPTC3_CLKCTRL 0>;
 249                         clock-names = "fck";
 250                         #address-cells = <1>;
 251                         #size-cells = <1>;
 252                         ranges = <0x0 0x49b00000 0x100000>;
 253
 254                         edma_tptc3: dma@0 {
 255                                 compatible = "ti,edma3-tptc";
 256                                 reg = <0 0x100000>;
 257                                 interrupts = <115>;
 258                                 interrupt-names = "edma3_tcerrint";
 259                         };
 260                 };
 261
 262                 elm: elm@48080000 {
 263                         compatible = "ti,am3352-elm";
 264                         ti,hwmods = "elm";
 265                         reg = <0x48080000 0x2000>;
 266                         interrupts = <4>;
 267                 };
 268
 269                 gpio1: gpio@48032000 {
 270                         compatible = "ti,omap4-gpio";
 271                         ti,hwmods = "gpio1";
 272                         ti,gpio-always-on;
 273                         reg = <0x48032000 0x1000>;
 274                         interrupts = <96>;
 275                         gpio-controller;
 276                         #gpio-cells = <2>;
 277                         interrupt-controller;
 278                         #interrupt-cells = <2>;
 279                 };
 280
 281                 gpio2: gpio@4804c000 {
 282                         compatible = "ti,omap4-gpio";
 283                         ti,hwmods = "gpio2";
 284                         ti,gpio-always-on;
 285                         reg = <0x4804c000 0x1000>;
 286                         interrupts = <98>;
 287                         gpio-controller;
 288                         #gpio-cells = <2>;
 289                         interrupt-controller;
 290                         #interrupt-cells = <2>;
 291                 };
 292
 293                 gpmc: gpmc@50000000 {
 294                         compatible = "ti,am3352-gpmc";
 295                         ti,hwmods = "gpmc";
 296                         reg = <0x50000000 0x2000>;
 297                         #address-cells = <2>;
 298                         #size-cells = <1>;
 299                         interrupts = <100>;
 300                         dmas = <&edma 52 0>;
 301                         dma-names = "rxtx";
 302                         gpmc,num-cs = <6>;
 303                         gpmc,num-waitpins = <2>;
 304                         interrupt-controller;
 305                         #interrupt-cells = <2>;
 306                         gpio-controller;
 307                         #gpio-cells = <2>;
 308                 };
 309
 310                 i2c1: i2c@48028000 {
 311                         compatible = "ti,omap4-i2c";
 312                         ti,hwmods = "i2c1";
 313                         reg = <0x48028000 0x1000>;
 314                         #address-cells = <1>;
 315                         #size-cells = <0>;
 316                         interrupts = <70>;
 317                         dmas = <&edma 58 0 &edma 59 0>;
 318                         dma-names = "tx", "rx";
 319                 };
 320
 321                 i2c2: i2c@4802a000 {
 322                         compatible = "ti,omap4-i2c";
 323                         ti,hwmods = "i2c2";
 324                         reg = <0x4802a000 0x1000>;
 325                         #address-cells = <1>;
 326                         #size-cells = <0>;
 327                         interrupts = <71>;
 328                         dmas = <&edma 60 0 &edma 61 0>;
 329                         dma-names = "tx", "rx";
 330                 };
 331
 332                 intc: interrupt-controller@48200000 {
 333                         compatible = "ti,dm816-intc";
 334                         interrupt-controller;
 335                         #interrupt-cells = <1>;
 336                         reg = <0x48200000 0x1000>;
 337                 };
 338
 339                 rtc: rtc@480c0000 {
 340                         compatible = "ti,am3352-rtc", "ti,da830-rtc";
 341                         reg = <0x480c0000 0x1000>;
 342                         interrupts = <75 76>;
 343                         ti,hwmods = "rtc";
 344                 };
 345
 346                 mailbox: mailbox@480c8000 {
 347                         compatible = "ti,omap4-mailbox";
 348                         reg = <0x480c8000 0x2000>;
 349                         interrupts = <77>;
 350                         ti,hwmods = "mailbox";
 351                         #mbox-cells = <1>;
 352                         ti,mbox-num-users = <4>;
 353                         ti,mbox-num-fifos = <12>;
 354                         mbox_dsp: mbox_dsp {
 355                                 ti,mbox-tx = <3 0 0>;
 356                                 ti,mbox-rx = <0 0 0>;
 357                         };
 358                 };
 359
 360                 spinbox: spinbox@480ca000 {
 361                         compatible = "ti,omap4-hwspinlock";
 362                         reg = <0x480ca000 0x2000>;
 363                         ti,hwmods = "spinbox";
 364                         #hwlock-cells = <1>;
 365                 };
 366
 367                 mdio: mdio@4a100800 {
 368                         compatible = "ti,davinci_mdio";
 369                         #address-cells = <1>;
 370                         #size-cells = <0>;
 371                         reg = <0x4a100800 0x100>;
 372                         ti,hwmods = "davinci_mdio";
 373                         bus_freq = <1000000>;
 374                         phy0: ethernet-phy@0 {
 375                                 reg = <1>;
 376                         };
 377                         phy1: ethernet-phy@1 {
 378                                 reg = <2>;
 379                         };
 380                 };
 381
 382                 eth0: ethernet@4a100000 {
 383                         compatible = "ti,dm816-emac";
 384                         ti,hwmods = "emac0";
 385                         reg = <0x4a100000 0x800
 386                                0x4a100900 0x3700>;
 387                         clocks = <&sysclk24_ck>;
 388                         syscon = <&scm_conf>;
 389                         ti,davinci-ctrl-reg-offset = <0>;
 390                         ti,davinci-ctrl-mod-reg-offset = <0x900>;
 391                         ti,davinci-ctrl-ram-offset = <0x2000>;
 392                         ti,davinci-ctrl-ram-size = <0x2000>;
 393                         interrupts = <40 41 42 43>;
 394                         phy-handle = <&phy0>;
 395                 };
 396
 397                 eth1: ethernet@4a120000 {
 398                         compatible = "ti,dm816-emac";
 399                         ti,hwmods = "emac1";
 400                         reg = <0x4a120000 0x4000>;
 401                         clocks = <&sysclk24_ck>;
 402                         syscon = <&scm_conf>;
 403                         ti,davinci-ctrl-reg-offset = <0>;
 404                         ti,davinci-ctrl-mod-reg-offset = <0x900>;
 405                         ti,davinci-ctrl-ram-offset = <0x2000>;
 406                         ti,davinci-ctrl-ram-size = <0x2000>;
 407                         interrupts = <44 45 46 47>;
 408                         phy-handle = <&phy1>;
 409                 };
 410
 411                 sata: sata@4a140000 {
 412                         compatible = "ti,dm816-ahci";
 413                         reg = <0x4a140000 0x10000>;
 414                         interrupts = <16>;
 415                         ti,hwmods = "sata";
 416                 };
 417
 418                 mcspi1: spi@48030000 {
 419                         compatible = "ti,omap4-mcspi";
 420                         reg = <0x48030000 0x1000>;
 421                         #address-cells = <1>;
 422                         #size-cells = <0>;
 423                         interrupts = <65>;
 424                         ti,spi-num-cs = <4>;
 425                         ti,hwmods = "mcspi1";
 426                         dmas = <&edma 16 0 &edma 17 0
 427                                 &edma 18 0 &edma 19 0
 428                                 &edma 20 0 &edma 21 0
 429                                 &edma 22 0 &edma 23 0>;
 430                         dma-names = "tx0", "rx0", "tx1", "rx1",
 431                                     "tx2", "rx2", "tx3", "rx3";
 432                 };
 433
 434                 mmc1: mmc@48060000 {
 435                         compatible = "ti,omap4-hsmmc";
 436                         reg = <0x48060000 0x11000>;
 437                         ti,hwmods = "mmc1";
 438                         interrupts = <64>;
 439                         dmas = <&edma 24 0 &edma 25 0>;
 440                         dma-names = "tx", "rx";
 441                 };
 442
 443                 timer1_target: target-module@4802e000 {
 444                         compatible = "ti,sysc-omap4-timer", "ti,sysc";
 445                         reg = <0x4802e000 0x4>,
 446                               <0x4802e010 0x4>;
 447                         reg-names = "rev", "sysc";
 448                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 449                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 450                                         <SYSC_IDLE_NO>,
 451                                         <SYSC_IDLE_SMART>,
 452                                         <SYSC_IDLE_SMART_WKUP>;
 453                         clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
 454                         clock-names = "fck";
 455                         #address-cells = <1>;
 456                         #size-cells = <1>;
 457                         ranges = <0x0 0x4802e000 0x1000>;
 458
 459                         timer1: timer@0 {
 460                                 compatible = "ti,dm816-timer";
 461                                 reg = <0 0x1000>;
 462                                 interrupts = <67>;
 463                                 ti,timer-alwon;
 464                                 clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
 465                                 clock-names = "fck";
 466                         };
 467                 };
 468
 469                 timer2_target: target-module@48040000 {
 470                         compatible = "ti,sysc-omap4-timer", "ti,sysc";
 471                         reg = <0x48040000 0x4>,
 472                               <0x48040010 0x4>;
 473                         reg-names = "rev", "sysc";
 474                         ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
 475                         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
 476                                         <SYSC_IDLE_NO>,
 477                                         <SYSC_IDLE_SMART>,
 478                                         <SYSC_IDLE_SMART_WKUP>;
 479                         clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
 480                         clock-names = "fck";
 481                         #address-cells = <1>;
 482                         #size-cells = <1>;
 483                         ranges = <0x0 0x48040000 0x1000>;
 484
 485                         timer2: timer@0 {
 486                                 compatible = "ti,dm816-timer";
 487                                 reg = <0 0x1000>;
 488                                 interrupts = <68>;
 489                                 clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
 490                                 clock-names = "fck";
 491                         };
 492                 };
 493
 494                 timer3: timer@48042000 {
 495                         compatible = "ti,dm816-timer";
 496                         reg = <0x48042000 0x2000>;
 497                         interrupts = <69>;
 498                         ti,hwmods = "timer3";
 499                 };
 500
 501                 timer4: timer@48044000 {
 502                         compatible = "ti,dm816-timer";
 503                         reg = <0x48044000 0x2000>;
 504                         interrupts = <92>;
 505                         ti,hwmods = "timer4";
 506                         ti,timer-pwm;
 507                 };
 508
 509                 timer5: timer@48046000 {
 510                         compatible = "ti,dm816-timer";
 511                         reg = <0x48046000 0x2000>;
 512                         interrupts = <93>;
 513                         ti,hwmods = "timer5";
 514                         ti,timer-pwm;
 515                 };
 516
 517                 timer6: timer@48048000 {
 518                         compatible = "ti,dm816-timer";
 519                         reg = <0x48048000 0x2000>;
 520                         interrupts = <94>;
 521                         ti,hwmods = "timer6";
 522                         ti,timer-pwm;
 523                 };
 524
 525                 timer7: timer@4804a000 {
 526                         compatible = "ti,dm816-timer";
 527                         reg = <0x4804a000 0x2000>;
 528                         interrupts = <95>;
 529                         ti,hwmods = "timer7";
 530                         ti,timer-pwm;
 531                 };
 532
 533                 uart1: uart@48020000 {
 534                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 535                         ti,hwmods = "uart1";
 536                         reg = <0x48020000 0x2000>;
 537                         clock-frequency = <48000000>;
 538                         interrupts = <72>;
 539                         dmas = <&edma 26 0 &edma 27 0>;
 540                         dma-names = "tx", "rx";
 541                 };
 542
 543                 uart2: uart@48022000 {
 544                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 545                         ti,hwmods = "uart2";
 546                         reg = <0x48022000 0x2000>;
 547                         clock-frequency = <48000000>;
 548                         interrupts = <73>;
 549                         dmas = <&edma 28 0 &edma 29 0>;
 550                         dma-names = "tx", "rx";
 551                 };
 552
 553                 uart3: uart@48024000 {
 554                         compatible = "ti,am3352-uart", "ti,omap3-uart";
 555                         ti,hwmods = "uart3";
 556                         reg = <0x48024000 0x2000>;
 557                         clock-frequency = <48000000>;
 558                         interrupts = <74>;
 559                         dmas = <&edma 30 0 &edma 31 0>;
 560                         dma-names = "tx", "rx";
 561                 };
 562
 563                 /* NOTE: USB needs a transceiver driver for phys to work */
 564                 usb: usb_otg_hs@47401000 {
 565                         compatible = "ti,am33xx-usb";
 566                         reg = <0x47401000 0x400000>;
 567                         ranges;
 568                         #address-cells = <1>;
 569                         #size-cells = <1>;
 570                         ti,hwmods = "usb_otg_hs";
 571
 572                         usb0: usb@47401000 {
 573                                 compatible = "ti,musb-dm816";
 574                                 reg = <0x47401400 0x400
 575                                        0x47401000 0x200>;
 576                                 reg-names = "mc", "control";
 577                                 interrupts = <18>;
 578                                 interrupt-names = "mc";
 579                                 dr_mode = "host";
 580                                 interface-type = <0>;
 581                                 phys = <&usb_phy0>;
 582                                 phy-names = "usb2-phy";
 583                                 mentor,multipoint = <1>;
 584                                 mentor,num-eps = <16>;
 585                                 mentor,ram-bits = <12>;
 586                                 mentor,power = <500>;
 587
 588                                 dmas = <&cppi41dma  0 0 &cppi41dma  1 0
 589                                         &cppi41dma  2 0 &cppi41dma  3 0
 590                                         &cppi41dma  4 0 &cppi41dma  5 0
 591                                         &cppi41dma  6 0 &cppi41dma  7 0
 592                                         &cppi41dma  8 0 &cppi41dma  9 0
 593                                         &cppi41dma 10 0 &cppi41dma 11 0
 594                                         &cppi41dma 12 0 &cppi41dma 13 0
 595                                         &cppi41dma 14 0 &cppi41dma  0 1
 596                                         &cppi41dma  1 1 &cppi41dma  2 1
 597                                         &cppi41dma  3 1 &cppi41dma  4 1
 598                                         &cppi41dma  5 1 &cppi41dma  6 1
 599                                         &cppi41dma  7 1 &cppi41dma  8 1
 600                                         &cppi41dma  9 1 &cppi41dma 10 1
 601                                         &cppi41dma 11 1 &cppi41dma 12 1
 602                                         &cppi41dma 13 1 &cppi41dma 14 1>;
 603                                 dma-names =
 604                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 605                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 606                                         "rx14", "rx15",
 607                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 608                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 609                                         "tx14", "tx15";
 610                         };
 611
 612                         usb1: usb@47401800 {
 613                                 compatible = "ti,musb-dm816";
 614                                 reg = <0x47401c00 0x400
 615                                        0x47401800 0x200>;
 616                                 reg-names = "mc", "control";
 617                                 interrupts = <19>;
 618                                 interrupt-names = "mc";
 619                                 dr_mode = "host";
 620                                 interface-type = <0>;
 621                                 phys = <&usb_phy1>;
 622                                 phy-names = "usb2-phy";
 623                                 mentor,multipoint = <1>;
 624                                 mentor,num-eps = <16>;
 625                                 mentor,ram-bits = <12>;
 626                                 mentor,power = <500>;
 627
 628                                 dmas = <&cppi41dma 15 0 &cppi41dma 16 0
 629                                         &cppi41dma 17 0 &cppi41dma 18 0
 630                                         &cppi41dma 19 0 &cppi41dma 20 0
 631                                         &cppi41dma 21 0 &cppi41dma 22 0
 632                                         &cppi41dma 23 0 &cppi41dma 24 0
 633                                         &cppi41dma 25 0 &cppi41dma 26 0
 634                                         &cppi41dma 27 0 &cppi41dma 28 0
 635                                         &cppi41dma 29 0 &cppi41dma 15 1
 636                                         &cppi41dma 16 1 &cppi41dma 17 1
 637                                         &cppi41dma 18 1 &cppi41dma 19 1
 638                                         &cppi41dma 20 1 &cppi41dma 21 1
 639                                         &cppi41dma 22 1 &cppi41dma 23 1
 640                                         &cppi41dma 24 1 &cppi41dma 25 1
 641                                         &cppi41dma 26 1 &cppi41dma 27 1
 642                                         &cppi41dma 28 1 &cppi41dma 29 1>;
 643                                 dma-names =
 644                                         "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
 645                                         "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
 646                                         "rx14", "rx15",
 647                                         "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
 648                                         "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
 649                                         "tx14", "tx15";
 650                         };
 651
 652                         cppi41dma: dma-controller@47402000 {
 653                                 compatible = "ti,am3359-cppi41";
 654                                 reg =  <0x47400000 0x1000
 655                                         0x47402000 0x1000
 656                                         0x47403000 0x1000
 657                                         0x47404000 0x4000>;
 658                                 reg-names = "glue", "controller", "scheduler", "queuemgr";
 659                                 interrupts = <17>;
 660                                 interrupt-names = "glue";
 661                                 #dma-cells = <2>;
 662                                 #dma-channels = <30>;
 663                                 #dma-requests = <256>;
 664                         };
 665                 };
 666
 667                 wd_timer2: wd_timer@480c2000 {
 668                         compatible = "ti,omap3-wdt";
 669                         ti,hwmods = "wd_timer";
 670                         reg = <0x480c2000 0x1000>;
 671                         interrupts = <0>;
 672                 };
 673         };
 674 };
 675
 676 #include "dm816x-clocks.dtsi"
 677
 678 /* Preferred always-on timer for clocksource */
 679 &timer1_target {
 680         ti,no-reset-on-init;
 681         ti,no-idle;
 682         timer@0 {
 683                 assigned-clocks = <&timer1_fck>;
 684                 assigned-clock-parents = <&sys_clkin_ck>;
 685         };
 686 };
 687
 688 /* Preferred timer for clockevent */
 689 &timer2_target {
 690         ti,no-reset-on-init;
 691         ti,no-idle;
 692         timer@0 {
 693                 assigned-clocks = <&timer2_fck>;
 694                 assigned-clock-parents = <&sys_clkin_ck>;
 695         };
 696 };