Linux 6.9-rc1
[linux-2.6-microblaze.git] / arch / arc / kernel / process.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
4  *
5  * Amit Bhor, Kanika Nema: Codito Technologies 2004
6  */
7
8 #include <linux/errno.h>
9 #include <linux/module.h>
10 #include <linux/sched.h>
11 #include <linux/sched/task.h>
12 #include <linux/sched/task_stack.h>
13
14 #include <linux/mm.h>
15 #include <linux/fs.h>
16 #include <linux/unistd.h>
17 #include <linux/ptrace.h>
18 #include <linux/slab.h>
19 #include <linux/syscalls.h>
20 #include <linux/elf.h>
21 #include <linux/tick.h>
22
23 #include <asm/fpu.h>
24
25 SYSCALL_DEFINE1(arc_settls, void *, user_tls_data_ptr)
26 {
27         task_thread_info(current)->thr_ptr = (unsigned int)user_tls_data_ptr;
28         return 0;
29 }
30
31 /*
32  * We return the user space TLS data ptr as sys-call return code
33  * Ideally it should be copy to user.
34  * However we can cheat by the fact that some sys-calls do return
35  * absurdly high values
36  * Since the tls dat aptr is not going to be in range of 0xFFFF_xxxx
37  * it won't be considered a sys-call error
38  * and it will be loads better than copy-to-user, which is a definite
39  * D-TLB Miss
40  */
41 SYSCALL_DEFINE0(arc_gettls)
42 {
43         return task_thread_info(current)->thr_ptr;
44 }
45
46 SYSCALL_DEFINE3(arc_usr_cmpxchg, int __user *, uaddr, int, expected, int, new)
47 {
48         struct pt_regs *regs = current_pt_regs();
49         u32 uval;
50         int ret;
51
52         /*
53          * This is only for old cores lacking LLOCK/SCOND, which by definition
54          * can't possibly be SMP. Thus doesn't need to be SMP safe.
55          * And this also helps reduce the overhead for serializing in
56          * the UP case
57          */
58         WARN_ON_ONCE(IS_ENABLED(CONFIG_SMP));
59
60         /* Z indicates to userspace if operation succeeded */
61         regs->status32 &= ~STATUS_Z_MASK;
62
63         ret = access_ok(uaddr, sizeof(*uaddr));
64         if (!ret)
65                  goto fail;
66
67 again:
68         preempt_disable();
69
70         ret = __get_user(uval, uaddr);
71         if (ret)
72                  goto fault;
73
74         if (uval != expected)
75                  goto out;
76
77         ret = __put_user(new, uaddr);
78         if (ret)
79                  goto fault;
80
81         regs->status32 |= STATUS_Z_MASK;
82
83 out:
84         preempt_enable();
85         return uval;
86
87 fault:
88         preempt_enable();
89
90         if (unlikely(ret != -EFAULT))
91                  goto fail;
92
93         mmap_read_lock(current->mm);
94         ret = fixup_user_fault(current->mm, (unsigned long) uaddr,
95                                FAULT_FLAG_WRITE, NULL);
96         mmap_read_unlock(current->mm);
97
98         if (likely(!ret))
99                  goto again;
100
101 fail:
102         force_sig(SIGSEGV);
103         return ret;
104 }
105
106 #ifdef CONFIG_ISA_ARCV2
107
108 void arch_cpu_idle(void)
109 {
110         /* Re-enable interrupts <= default irq priority before committing SLEEP */
111         const unsigned int arg = 0x10 | ARCV2_IRQ_DEF_PRIO;
112
113         __asm__ __volatile__(
114                 "sleep %0       \n"
115                 :
116                 :"I"(arg)); /* can't be "r" has to be embedded const */
117 }
118
119 #else   /* ARC700 */
120
121 void arch_cpu_idle(void)
122 {
123         /* sleep, but enable both set E1/E2 (levels of interrupts) before committing */
124         __asm__ __volatile__("sleep 0x3 \n");
125 }
126
127 #endif
128
129 asmlinkage void ret_from_fork(void);
130
131 /*
132  * Copy architecture-specific thread state
133  *
134  * Layout of Child kernel mode stack as setup at the end of this function is
135  *
136  * |     ...        |
137  * |     ...        |
138  * |    unused      |
139  * |                |
140  * ------------------
141  * |     r25        |   <==== top of Stack (thread.ksp)
142  * ~                ~
143  * |    --to--      |   (CALLEE Regs of kernel mode)
144  * |     r13        |
145  * ------------------
146  * |     fp         |
147  * |    blink       |   @ret_from_fork
148  * ------------------
149  * |                |
150  * ~                ~
151  * ~                ~
152  * |                |
153  * ------------------
154  * |     r12        |
155  * ~                ~
156  * |    --to--      |   (scratch Regs of user mode)
157  * |     r0         |
158  * ------------------
159  * |      SP        |
160  * |    orig_r0     |
161  * |    event/ECR   |
162  * |    user_r25    |
163  * ------------------  <===== END of PAGE
164  */
165 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
166 {
167         unsigned long clone_flags = args->flags;
168         unsigned long usp = args->stack;
169         unsigned long tls = args->tls;
170         struct pt_regs *c_regs;        /* child's pt_regs */
171         unsigned long *childksp;       /* to unwind out of __switch_to() */
172         struct callee_regs *c_callee;  /* child's callee regs */
173         struct callee_regs *parent_callee;  /* paren't callee */
174         struct pt_regs *regs = current_pt_regs();
175
176         /* Mark the specific anchors to begin with (see pic above) */
177         c_regs = task_pt_regs(p);
178         childksp = (unsigned long *)c_regs - 2;  /* 2 words for FP/BLINK */
179         c_callee = ((struct callee_regs *)childksp) - 1;
180
181         /*
182          * __switch_to() uses thread.ksp to start unwinding stack
183          * For kernel threads we don't need to create callee regs, the
184          * stack layout nevertheless needs to remain the same.
185          * Also, since __switch_to anyways unwinds callee regs, we use
186          * this to populate kernel thread entry-pt/args into callee regs,
187          * so that ret_from_kernel_thread() becomes simpler.
188          */
189         p->thread.ksp = (unsigned long)c_callee;        /* THREAD_KSP */
190
191         /* __switch_to expects FP(0), BLINK(return addr) at top */
192         childksp[0] = 0;                        /* fp */
193         childksp[1] = (unsigned long)ret_from_fork; /* blink */
194
195         if (unlikely(args->fn)) {
196                 memset(c_regs, 0, sizeof(struct pt_regs));
197
198                 c_callee->r13 = (unsigned long)args->fn_arg;
199                 c_callee->r14 = (unsigned long)args->fn;
200
201                 return 0;
202         }
203
204         /*--------- User Task Only --------------*/
205
206         /* __switch_to expects FP(0), BLINK(return addr) at top of stack */
207         childksp[0] = 0;                                /* for POP fp */
208         childksp[1] = (unsigned long)ret_from_fork;     /* for POP blink */
209
210         /* Copy parents pt regs on child's kernel mode stack */
211         *c_regs = *regs;
212
213         if (usp)
214                 c_regs->sp = usp;
215
216         c_regs->r0 = 0;         /* fork returns 0 in child */
217
218         parent_callee = ((struct callee_regs *)regs) - 1;
219         *c_callee = *parent_callee;
220
221         if (unlikely(clone_flags & CLONE_SETTLS)) {
222                 /*
223                  * set task's userland tls data ptr from 4th arg
224                  * clone C-lib call is difft from clone sys-call
225                  */
226                 task_thread_info(p)->thr_ptr = tls;
227         } else {
228                 /* Normal fork case: set parent's TLS ptr in child */
229                 task_thread_info(p)->thr_ptr =
230                 task_thread_info(current)->thr_ptr;
231         }
232
233
234         /*
235          * setup usermode thread pointer #1:
236          * when child is picked by scheduler, __switch_to() uses @c_callee to
237          * populate usermode callee regs: this works (despite being in a kernel
238          * function) since special return path for child @ret_from_fork()
239          * ensures those regs are not clobbered all the way to RTIE to usermode
240          */
241         c_callee->r25 = task_thread_info(p)->thr_ptr;
242
243 #ifdef CONFIG_ARC_CURR_IN_REG
244         /*
245          * setup usermode thread pointer #2:
246          * however for this special use of r25 in kernel, __switch_to() sets
247          * r25 for kernel needs and only in the final return path is usermode
248          * r25 setup, from pt_regs->user_r25. So set that up as well
249          */
250         c_regs->user_r25 = c_callee->r25;
251 #endif
252
253         return 0;
254 }
255
256 /*
257  * Do necessary setup to start up a new user task
258  */
259 void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
260 {
261         regs->sp = usp;
262         regs->ret = pc;
263
264         /*
265          * [U]ser Mode bit set
266          * [L] ZOL loop inhibited to begin with - cleared by a LP insn
267          * Interrupts enabled
268          */
269         regs->status32 = STATUS_U_MASK | STATUS_L_MASK | ISA_INIT_STATUS_BITS;
270
271         fpu_init_task(regs);
272
273         /* bogus seed values for debugging */
274         regs->lp_start = 0x10;
275         regs->lp_end = 0x80;
276 }
277
278 /*
279  * Some archs flush debug and FPU info here
280  */
281 void flush_thread(void)
282 {
283 }
284
285 int elf_check_arch(const struct elf32_hdr *x)
286 {
287         unsigned int eflags;
288
289         if (x->e_machine != EM_ARC_INUSE) {
290                 pr_err("ELF not built for %s ISA\n",
291                         is_isa_arcompact() ? "ARCompact":"ARCv2");
292                 return 0;
293         }
294
295         eflags = x->e_flags;
296         if ((eflags & EF_ARC_OSABI_MSK) != EF_ARC_OSABI_CURRENT) {
297                 pr_err("ABI mismatch - you need newer toolchain\n");
298                 force_fatal_sig(SIGSEGV);
299                 return 0;
300         }
301
302         return 1;
303 }
304 EXPORT_SYMBOL(elf_check_arch);