Documentation/devicetree/bindings/usb/cdns,usb3.yaml

   1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
   2 %YAML 1.2
   3 ---
   4 $id: http://devicetree.org/schemas/usb/cdns,usb3.yaml#
   5 $schema: http://devicetree.org/meta-schemas/core.yaml#
   6
   7 title: Cadence USBSS-DRD controller bindings
   8
   9 maintainers:
  10   - Pawel Laszczak <pawell@cadence.com>
  11
  12 properties:
  13   compatible:
  14     const: cdns,usb3
  15
  16   reg:
  17     items:
  18       - description: OTG controller registers
  19       - description: XHCI Host controller registers
  20       - description: DEVICE controller registers
  21
  22   reg-names:
  23     items:
  24       - const: otg
  25       - const: xhci
  26       - const: dev
  27
  28   interrupts:
  29     items:
  30       - description: OTG/DRD controller interrupt
  31       - description: XHCI host controller interrupt
  32       - description: Device controller interrupt
  33
  34   interrupt-names:
  35     items:
  36       - const: host
  37       - const: peripheral
  38       - const: otg
  39
  40   dr_mode:
  41     enum: [host, otg, peripheral]
  42
  43   maximum-speed:
  44     enum: [super-speed, high-speed, full-speed]
  45
  46   phys:
  47     minItems: 1
  48     maxItems: 2
  49
  50   phy-names:
  51     minItems: 1
  52     maxItems: 2
  53     items:
  54       anyOf:
  55         - const: cdns3,usb2-phy
  56         - const: cdns3,usb3-phy
  57
  58   cdns,on-chip-buff-size:
  59     description:
  60       size of memory intended as internal memory for endpoints
  61       buffers expressed in KB
  62     $ref: /schemas/types.yaml#/definitions/uint32
  63
  64   cdns,phyrst-a-enable:
  65     description: Enable resetting of PHY if Rx fail is detected
  66     type: boolean
  67
  68 required:
  69   - compatible
  70   - reg
  71   - reg-names
  72   - interrupts
  73
  74 additionalProperties: false
  75
  76 examples:
  77   - |
  78     #include <dt-bindings/interrupt-controller/arm-gic.h>
  79     bus {
  80         #address-cells = <2>;
  81         #size-cells = <2>;
  82
  83         usb@6000000 {
  84             compatible = "cdns,usb3";
  85             reg = <0x00 0x6000000 0x00 0x10000>,
  86                   <0x00 0x6010000 0x00 0x10000>,
  87                   <0x00 0x6020000 0x00 0x10000>;
  88             reg-names = "otg", "xhci", "dev";
  89             interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
  90                          <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
  91                          <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
  92             interrupt-names = "host", "peripheral", "otg";
  93             maximum-speed = "super-speed";
  94             dr_mode = "otg";
  95         };
  96     };