Documentation/devicetree/bindings/spi/spi-synquacer.txt

   1 * Socionext Synquacer HS-SPI bindings
   2
   3 Required Properties:
   4 - compatible: should be "socionext,synquacer-spi"
   5 - reg: physical base address of the controller and length of memory mapped
   6        region.
   7 - interrupts: should contain the "spi_rx", "spi_tx" and "spi_fault" interrupts.
   8 - clocks: core clock iHCLK. Optional rate clock iPCLK (default is iHCLK)
   9 - clock-names: Shall be "iHCLK" and "iPCLK" respectively
  10
  11 Optional Properties:
  12 - socionext,use-rtm: boolean, if required to use "retimed clock" for RX
  13 - socionext,set-aces: boolean, if same active clock edges field to be set.
  14
  15 Example:
  16
  17         spi0: spi@ff110000 {
  18                 compatible = "socionext,synquacer-spi";
  19                 reg = <0xff110000 0x1000>;
  20                 interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
  21                              <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
  22                              <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
  23                 clocks = <&clk_hsspi>;
  24                 clock-names = "iHCLK";
  25                 socionext,use-rtm;
  26                 socionext,set-aces;
  27         };