Merge tag 'lkdtm-next' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux...
[linux-2.6-microblaze.git] / Documentation / devicetree / bindings / bus / ti-sysc.yaml
1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2 %YAML 1.2
3 ---
4 $id: http://devicetree.org/schemas/bus/ti-sysc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
6
7 title: Texas Instruments interconnect target module binding
8
9 maintainers:
10   - Tony Lindgren <tony@atomide.com>
11
12 description:
13   Texas Instruments SoCs can have a generic interconnect target module
14   for devices connected to various interconnects such as L3 interconnect
15   using Arteris NoC, and L4 interconnect using Sonics s3220. This module
16   is mostly used for interaction between module and Power, Reset and Clock
17   Manager PRCM. It participates in the OCP Disconnect Protocol, but other
18   than that it is mostly independent of the interconnect.
19
20   Each interconnect target module can have one or more devices connected to
21   it. There is a set of control registers for managing the interconnect target
22   module clocks, idle modes and interconnect level resets.
23
24   The interconnect target module control registers are sprinkled into the
25   unused register address space of the first child device IP block managed by
26   the interconnect target module. Typically the register names are REVISION,
27   SYSCONFIG and SYSSTATUS.
28
29 properties:
30   $nodename:
31     pattern: "^target-module(@[0-9a-f]+)?$"
32
33   compatible:
34     oneOf:
35       - items:
36           - enum:
37               - ti,sysc-omap2
38               - ti,sysc-omap4
39               - ti,sysc-omap4-simple
40               - ti,sysc-omap2-timer
41               - ti,sysc-omap4-timer
42               - ti,sysc-omap3430-sr
43               - ti,sysc-omap3630-sr
44               - ti,sysc-omap4-sr
45               - ti,sysc-omap3-sham
46               - ti,sysc-omap-aes
47               - ti,sysc-mcasp
48               - ti,sysc-dra7-mcasp
49               - ti,sysc-usb-host-fs
50               - ti,sysc-dra7-mcan
51               - ti,sysc-pruss
52           - const: ti,sysc
53       - items:
54           - const: ti,sysc
55
56   reg:
57     description:
58       Interconnect target module control registers consisting of
59       REVISION, SYSCONFIG and SYSSTATUS registers as defined in the
60       Technical Reference Manual for the SoC.
61     minItems: 1
62     maxItems: 3
63
64   reg-names:
65     description:
66       Interconnect target module control register names consisting
67       of "rev", "sysc" and "syss".
68     oneOf:
69       - minItems: 1
70         items:
71           - const: rev
72           - const: sysc
73           - const: syss
74       - items:
75           - const: rev
76           - const: syss
77       - enum: [ sysc, syss ]
78
79   power-domains:
80     description: Target module power domain if available.
81     maxItems: 1
82
83   clocks:
84     description:
85       Target module clocks consisting of one functional clock, one
86       interface clock, and up to 8 module specific optional clocks.
87       Some modules may have only the functional clock, and some have
88       no configurable clocks.
89     minItems: 1
90     maxItems: 4
91
92   clock-names:
93     description:
94       Target module clock names like "fck", "ick", "optck1", "optck2"
95       if the clocks are configurable.
96     oneOf:
97       - enum: [ ick, fck, sys_clk ]
98       - items:
99           - const: fck
100           - enum: [ ick. dbclk, osc, sys_clk, dss_clk, ahclkx ]
101       - items:
102           - const: fck
103           - const: phy-clk
104           - const: phy-clk-div
105       - items:
106           - const: fck
107           - const: hdmi_clk
108           - const: sys_clk
109           - const: tv_clk
110       - items:
111           - const: fck
112           - const: ahclkx
113           - const: ahclkr
114
115   resets:
116     description:
117       Target module reset bit in the RSTCTRL register if wired for the module.
118       Note that the other reset bits should be mapped for the child device
119       driver to use.
120     maxItems: 1
121
122   reset-names:
123     description:
124       Target module reset names in the RSTCTRL register, typically named
125       "rstctrl" if only one reset bit is wired for the module.
126     items:
127       - const: rstctrl
128
129   '#address-cells':
130     enum: [ 1, 2 ]
131
132   '#size-cells':
133     enum: [ 1, 2 ]
134
135   ranges: true
136
137   dma-ranges: true
138
139   ti,sysc-mask:
140     description: Mask of supported register bits for the SYSCONFIG register
141     $ref: /schemas/types.yaml#/definitions/uint32
142
143   ti,sysc-midle:
144     description: List of hardware supported idle modes
145     $ref: /schemas/types.yaml#/definitions/uint32-array
146
147   ti,sysc-sidle:
148     description: List of hardware supported idle modes
149     $ref: /schemas/types.yaml#/definitions/uint32-array
150
151   ti,syss-mask:
152     description: Mask of supported register bits for the SYSSTATUS register
153     $ref: /schemas/types.yaml#/definitions/uint32
154
155   ti,sysc-delay-us:
156     description: Delay needed after OCP softreset before accessing SYCONFIG
157     default: 0
158     minimum: 0
159     maximum: 2
160
161   ti,no-reset-on-init:
162     description: Interconnect target module shall not be reset at init
163     type: boolean
164
165   ti,no-idle-on-init:
166     description: Interconnect target module shall not be idled at init
167     type: boolean
168
169   ti,no-idle:
170     description: Interconnect target module shall not be idled
171     type: boolean
172
173   ti,hwmods:
174     description: Interconnect module name to use with legacy hwmod data
175     $ref: /schemas/types.yaml#/definitions/string
176     deprecated: true
177
178 required:
179   - compatible
180   - '#address-cells'
181   - '#size-cells'
182   - ranges
183
184 additionalProperties:
185   type: object
186
187 examples:
188   - |
189     #include <dt-bindings/bus/ti-sysc.h>
190     #include <dt-bindings/clock/omap4.h>
191
192     target-module@2b000 {
193         compatible = "ti,sysc-omap2", "ti,sysc";
194         ti,hwmods = "usb_otg_hs";
195         reg = <0x2b400 0x4>,
196               <0x2b404 0x4>,
197               <0x2b408 0x4>;
198         reg-names = "rev", "sysc", "syss";
199         clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
200         clock-names = "fck";
201         ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
202                          SYSC_OMAP2_SOFTRESET |
203                          SYSC_OMAP2_AUTOIDLE)>;
204         ti,sysc-midle = <SYSC_IDLE_FORCE>,
205                         <SYSC_IDLE_NO>,
206                         <SYSC_IDLE_SMART>;
207         ti,sysc-sidle = <SYSC_IDLE_FORCE>,
208                         <SYSC_IDLE_NO>,
209                         <SYSC_IDLE_SMART>,
210                         <SYSC_IDLE_SMART_WKUP>;
211         ti,syss-mask = <1>;
212         #address-cells = <1>;
213         #size-cells = <1>;
214         ranges = <0 0x2b000 0x1000>;
215     };