drm/amdgpu: disentangle HG systems from vgaswitcheroo

There's no need to keep vgaswitcheroo around for HG
systems.  They don't use muxes and their power control
is handled via ACPI.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable DPM_FLAG_MAY_SKIP_RESUME and DPM_FLAG_SMART_SUSPEND flags (v2)

Once the device has runtime suspended, we don't need to power it
back up again for system suspend.  Likewise for resume, we don't
to power up the device again on resume only to power it back off
again via runtime pm because it's still idle.

v2: add DPM_FLAG_SMART_PREPARE as well

Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add a dev_pm_ops prepare callback (v2)

as per:
https://www.kernel.org/doc/html/latest/driver-api/pm/devices.html

The prepare callback is required to support the DPM_FLAG_SMART_SUSPEND
driver flag.  This allows runtime pm to auto complete when the
system goes into suspend avoiding a wake up on suspend and on resume.
Apply this for hybrid gfx and BOCO systems where d3cold is
provided by the ACPI platform.

v2: check if device is runtime suspended in prepare.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add additional Sienna Cichlid PCI ID

Add new DID.

Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display/dm: add missing parameter documentation

Added a new parameter and forgot to update the documentation.

Fixes: b6f91fc183f7 ("drm/amdgpu/display: buffer INTERRUPT_LOW_IRQ_CONTEXT interrupt work")
Reviewed-by: Xiaogang Chen <xiaogang.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Xiaogang Chen <xiaogang.chen@amd.com>

drm/amdgpu: wrap kiq ring ops with kiq spinlock

KIQ ring is being operated by kfd as well as amdgpu.
KFD is using kiq lock, we should the same from amdgpu side
as well.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: disable gpu reset on Vangogh for now"

This reverts commit 33cf440d594bfbf81fc20604957bc64f02d0b560.
And it will enable mode-2 gpu reset for vangogh,
it asks PSP firmware version is 00.1A.00.0F or newer.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add codes to capture invalid hardware access when recovery

When recovery thread has begun GPU reset, there should be not other
threads to access hardware, otherwise system randomly hang.

v2 (chk): rewritten from scratch, use trylock and lockdep instead of
hand wiring the logic.

v3: add in_irq check

v4: change to check in_task

Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-misc-next-2021-04-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.13:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
  - bridge: Fix Kconfig dependency
  - cmdline: Refuse zero width/height mode
  - ttm: Ignore signaled move fences, ioremap buffer according to mem
         caching settins

Driver Changes:
  - Conversions to sysfs_emit
  - tegra: Don't register DP AUX channels before connectors
  - zynqmp: Fix for an out-of-bound (but within struct padding) memset

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210409090020.jroa2d4p4qansrpa@gilmour

drm/panel: Convert sysfs sprintf/snprintf family to sysfs_emit

Fix the following coccicheck warning:
drivers/gpu/drm/panel//panel-tpo-td043mtea1.c:217:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/panel//panel-tpo-td043mtea1.c:189:8-16: WARNING:
use scnprintf or sprintf

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1617069288-8317-1-git-send-email-tiantao6@hisilicon.com

drm/dp_mst: Drop DRM_ERROR() on kzalloc() fail in drm_dp_mst_handle_up_req()

Checkpatch was complaining about this - there's no need for us to print
errors when kzalloc() fails, as kzalloc() will already WARN for us. So,
let's fix that before converting things to make checkpatch happy.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-20-lyude@redhat.com

drm/print: Fixup DRM_DEBUG_KMS_RATELIMITED()

Since we're about to move drm_dp_helper.c over to drm_dbg_*(), we'll want
to make sure that we can also add ratelimited versions of these macros in
order to retain some of the previous debugging output behavior we had.

However, as I was preparing to do this I noticed that the current
rate limited macros we have are kind of bogus. It looks like when I wrote
these, I didn't notice that we'd always be calling __ratelimit() even if
the debugging message we'd be printing would normally be filtered out due
to the relevant DRM debugging category being disabled.

So, let's fix this by making sure to check drm_debug_enabled() in our
ratelimited macros before calling __ratelimit(), and start using
drm_dev_printk() in order to print debugging messages since that will save
us from doing a redundant drm_debug_enabled() check. And while we're at it,
let's move the code for this into another macro that we can reuse for
defining new ratelimited DRM debug macros more easily.

v2:
* Make sure to use tabs where possible in __DRM_DEFINE_DBG_RATELIMITED()

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-8-lyude@redhat.com

drm/tegra: Don't register DP AUX channels before connectors

As pointed out by the documentation for drm_dp_aux_register(),
drm_dp_aux_init() should be used in situations where the AUX channel for a
display driver can potentially be registered before it's respective DRM
driver. This is the case with Tegra, since the DP aux channel exists as a
platform device instead of being a grandchild of the DRM device.

Since we're about to add a backpointer to a DP AUX channel's respective DRM
device, let's fix this so that we don't potentially allow userspace to use
the AUX channel before we've associated it with it's DRM connector.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-3-lyude@redhat.com

drm/dp: Fixup kernel docs for struct drm_dp_aux

* Make sure that struct members are referred to using @, otherwise they
  won't be formatted as such
* Make sure to refer to other struct types using & so they link back to
  each struct's definition
* Make sure to precede constant values with % so they're formatted
  correctly

Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326203807.105754-2-lyude@redhat.com

drm/sched: add missing member documentation

Just fix a warning.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: f2f12eb9c32b ("drm/scheduler: provide scheduler score externally")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401125213.138855-1-christian.koenig@amd.com

gma500: Use DEFINE_SPINLOCK() for spinlock

spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1617710114-48071-1-git-send-email-huangguobin4@huawei.com

drm/drm_internal.h: Remove repeated struct declaration

struct drm_gem_object is declared twice. One is declared
at 40th line. The blew one is not needed. Remove the duplicate.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401081704.1000863-1-wanjiabing@vivo.com

drm: xlnx: zynqmp: fix a memset in zynqmp_dp_train()

The dp->train_set[] for this driver is only two characters, not four so
this memsets too much.  Fortunately, this ends up corrupting a struct
hole and not anything important.

Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YGLwCBMotnrKZu6P@mwanda

drm/bridge: fix typo in Kconfig

fix 's/controller/controllers/'

in the sentence:
Most display controller handle display connectors...

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326103216.7918-2-dafna.hirschfeld@collabora.com

drm/ttm: ioremap buffer according to TTM mem caching setting

If tbo.mem.bus.caching is cached, buffer is intended to be mapped
as cached from CPU. Map it with ioremap_cache.

This wasn't necessary before as device memory was never mapped
as cached from CPU side. It becomes necessary for aldebaran as
device memory is mapped cached from CPU.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Christian Konig <Christian.Koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1614638628-10508-1-git-send-email-Oak.Zeng@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/ttm: Ignore signaled move fences

Move fences that have already signaled should not prevent memory
allocations with no_wait_gpu.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210227034524.21763-1-Felix.Kuehling@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/syncobj: use newly allocated stub fences

Allocate a new private stub fence in drm_syncobj_assign_null_handle,
instead of using a static stub fence.

When userspace creates a fence with DRM_SYNCOBJ_CREATE_SIGNALED or when
userspace signals a fence via DRM_IOCTL_SYNCOBJ_SIGNAL, the timestamp
obtained when the fence is exported and queried with SYNC_IOC_FILE_INFO
should match when the fence's status was changed from the perspective of
userspace, which is during the respective ioctl.

When a static stub fence started being used in by these ioctls, this
behavior changed. Instead, the timestamp returned by SYNC_IOC_FILE_INFO
became the first time anything used the static stub fence, which has no
meaning to userspace.

Signed-off-by: David Stevens <stevensd@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408095428.3983055-1-stevensd@google.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/bridge: lt8912b: Add header file <linux/gpio/consumer.h>

If CONFIG_DRM_LONTIUM_LT8912B=m, the following errors will be seen while
compiling lontium-lt8912b.c

drivers/gpu/drm/bridge/lontium-lt8912b.c: In function
‘lt8912_hard_power_on’:
drivers/gpu/drm/bridge/lontium-lt8912b.c:252:2: error: implicit
declaration of function ‘gpiod_set_value_cansleep’; did you mean
‘gpio_set_value_cansleep’? [-Werror=implicit-function-declaration]
  gpiod_set_value_cansleep(lt->gp_reset, 0);
  ^~~~~~~~~~~~~~~~~~~~~~~~
  gpio_set_value_cansleep
drivers/gpu/drm/bridge/lontium-lt8912b.c: In function ‘lt8912_parse_dt’:
drivers/gpu/drm/bridge/lontium-lt8912b.c:628:13: error: implicit
declaration of function ‘devm_gpiod_get_optional’; did you mean
‘devm_gpio_request_one’? [-Werror=implicit-function-declaration]
  gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
             ^~~~~~~~~~~~~~~~~~~~~~~
             devm_gpio_request_one
drivers/gpu/drm/bridge/lontium-lt8912b.c:628:51: error: ‘GPIOD_OUT_HIGH’
undeclared (first use in this function); did you mean ‘GPIOF_INIT_HIGH’?
  gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
                                                   ^~~~~~~~~~~~~~
                                                   GPIOF_INIT_HIGH

Signed-off-by: Zhang Jianhua <zhangjianhua18@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210408093822.207917-1-zhangjianhua18@huawei.com

Merge tag 'drm-intel-next-2021-04-01' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Features:
- Add support for FBs requiring a power-of-two stride padding (Imre)

Refactoring:
- Disassociate display version from gen (Matt)
- Refactor legacy DP and HDMI code to separate files (Ville)
- Refactor FB plane code to a separate file (Imre)
- Refactor VBT child device info parsing and usage (Jani)
- Refactor KBL/TGL/ADL-S display and gt stepping schemes (Jani)

Fixes:
- DP Link-Training Tunable PHY Repeaters (LTTPR) fixes (Imre)
- HDCP fixes (Anshuman)
- DP 2.0 HDMI 2.1 PCON Fixed Rate Link (FRL) fixes (Ankit)
- Set HDA link parameters in driver (Kai)
- Fix enabled_planes bitmask (Ville)
- Fix transposed arguments to skl_plane_wm_level() (Ville)
- Stop adding planes to the commit needlessly (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v996ml17.fsf@intel.com

Merge tag 'drm-intel-gt-next-2021-04-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Driver Changes:

- Prepare for local/device memory support on DG1 by starting
  to use it for kernel internal allocations: context, ring
  and engine scratch (Matt A, CQ, Abdiel, Imre)
- Sandybridge fix to avoid hard hang on ring resume (Chris)
- Limit imported dma-buf size to int32 (Matt A)
- Double check heartbeat timeout before resetting (Chris)

- Use new tasklet API for execution list (Emil)
- Fix SPDX checkpats warnings (Chris)
- Fixes for various checkpatch warnings (Chris)
- Selftest improvements (Chris)
- Move the defer_request waiter active assertion to correct spot (Chris)
- Make local-memory probing a GT operation (Matt, Tvrtko)
- Protect against request freeing during cancellation on wedging (Chris)
- Retire unexpected starting state error dumping (Chris)
- Distinction of memory regions in debugging (Zbigniew)
- Always flush the submission queue on checking for idle (Chris)

- Consolidate 2big error check to helper (Matt)
- Decrease number of subplatform bits (Tvrtko)
- Remove unused internal request priority levels (Chris)
- Document the unused internal header bits in buddy allocator (Matt)
- Cleanup the region class/instance encoding (Matt)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YGxksaZGXHnFxlwg@jlahtine-mobl.ger.corp.intel.com

Merge tag 'mediatek-drm-next-5.13' of https://git./linux/kernel/git/chunkuang.hu/linux into drm-next

Mediatek DRM Next for Linux 5.13

1. Fine tune the line time for EOTp.
2. Add support mt8192 dpi.
3. Make crtc config-updating atomic.
4. Don't support hdmi connector creation.

From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210405082248.3578-1-chunkuang.hu@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-misc-next-2021-04-01' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.13:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
  - mst: Improve topology logging
  - edid: Rework and improvements for displayid

Driver Changes:
  - anx7625: Regulators support
  - bridge: Support for the Chipone ICN6211, Lontium LT8912B
  - lt9611: Fix 4k panels handling

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401110552.2b3yetlgsjtlotcn@gilmour

drm/vblank: Do not store a new vblank timestamp in drm_vblank_restore()

drm_vblank_restore() exists because certain power saving states
can clobber the hardware frame counter. The way it does this is
by guesstimating how many frames were missed purely based on
the difference between the last stored timestamp vs. a newly
sampled timestamp.

If we should call this function before a full frame has
elapsed since we sampled the last timestamp we would end up
with a possibly slightly different timestamp value for the
same frame. Currently we will happily overwrite the already
stored timestamp for the frame with the new value. This
could cause userspace to observe two different timestamps
for the same frame (and the timestamp could even go
backwards depending on how much error we introduce when
correcting the timestamp based on the scanout position).

To avoid that let's not update the stored timestamp at all,
and instead we just fix up the last recorded hw vblank counter
value such that the already stored timestamp/seq number will
match. Thus the next time a vblank irq happens it will calculate
the correct diff between the current and stored hw vblank counter
values.

Sidenote: Another possible idea that came to mind would be to
do this correction only if the power really was removed since
the last time we sampled the hw frame counter. But to do that
we would need a robust way to detect when it has occurred. Some
possibilities could involve some kind of hardare power well
transition counter, or potentially we could store a magic value
in a scratch register that lives in the same power well. But
I'm not sure either of those exist, so would need an actual
investigation to find out. All of that is very hardware specific
of course, so would have to be done in the driver code.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210218160305.16711-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Refuse to create zero width/height cmdline modes

If the user specifies zero width/height cmdline mode i915 will
blow up as the fbdev path will bypass the regular fb sanity
check that would otherwise have refused to create a framebuffer
with zero width/height.

The reason I thought to try this is so that I can force a specific
depth for fbdev without actually having to hardcode the mode
on the kernel cmdline. Eg. if I pass video=0x0-8 I will get an
8bpp framebuffer at my monitor's native resolution.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607162611.23514-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers: gpu: drm: bridge: fix kconfig dependency on DRM_KMS_HELPER

When DRM_TOSHIBA_TC358762 is enabled and DRM_KMS_HELPER is disabled,
Kbuild gives the following warning:

WARNING: unmet direct dependencies detected for DRM_PANEL_BRIDGE
  Depends on [n]: HAS_IOMEM [=y] && DRM_BRIDGE [=y] && DRM_KMS_HELPER [=n]
  Selected by [y]:
  - DRM_TOSHIBA_TC358762 [=y] && HAS_IOMEM [=y] && DRM [=y] && DRM_BRIDGE [=y] && OF [=y]

This is because DRM_TOSHIBA_TC358762 selects DRM_PANEL_BRIDGE,
without depending on or selecting DRM_KMS_HELPER,
despite that config option depending on DRM_KMS_HELPER.

Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210222215502.24487-1-julianbraha@gmail.com

drm/mediatek: Don't support hdmi connector creation

commit f01195148967 ("drm/mediatek: mtk_dpi: Create connector for bridges")
broke the display support for elm device since mtk_dpi calls
drm_bridge_attach with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR
while mtk_hdmi does not yet support this flag.

Fix this by accepting DRM_BRIDGE_ATTACH_NO_CONNECTOR in bridge attachment.
Implement the drm_bridge_funcs .detect() and .get_edid() operations, and
call drm_bridge_hpd_notify() to report HPD. This provides the
necessary API to support disabling connector creation.

In addition, the field 'conn' is removed from the mtk_hdmi struct since
mtk_hdmi don't create a connector. It is replaced with a pointer
'curr_conn' that points to the current connector which can be access
through the global state.

This patch is inspired by a similar patch for bridge/synopsys/dw-hdmi.c:
commit ec971aaa6775
("drm: bridge: dw-hdmi: Make connector creation optional")
But with the difference that in mtk-hdmi only the option of not creating
a connector is supported.

Fixes: f01195148967 ("drm/mediatek: mtk_dpi: Create connector for bridges")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/mediatek: Switch the hdmi bridge ops to the atomic versions

The bridge operation '.enable' and the audio cb '.get_eld'
access hdmi->conn. In the future we will want to support
the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR and then we will
not have direct access to the connector.
The atomic version '.atomic_enable' allows accessing the
current connector from the state.
This patch switches the bridge to the atomic version to
prepare access to the connector in later patches.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/komeda: Fix bit check to import to value of proper type

Another issue found by KASAN. The bit finding is buried inside the
dp_for_each_set_bit() macro (that passes on to for_each_set_bit() that
calls the bit stuff. These bit functions want an unsigned long pointer
as input and just dumbly casting leads to out-of-bounds accesses.
This fixes that.

Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: James Qian Wang <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204131102.68658-1-carsten.haitzler@foss.arm.com

drm/komeda: Convert sysfs sprintf/snprintf family to sysfs_emit

Fix the following coccicheck warning:
drivers/gpu/drm/arm/display/komeda/komeda_dev.c:97:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/arm/display/komeda/komeda_dev.c:88:8-16: WARNING:
use scnprintf or sprintf
drivers/gpu/drm/arm/display/komeda/komeda_dev.c:65:8-16: WARNING:
use scnprintf or sprintf

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: James Qian Wang <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1617067518-31091-1-git-send-email-tiantao6@hisilicon.com

drm/bridge: anx7625: disable regulators when power off

When suspending the driver, anx7625_power_standby() will be called to
turn off reset-gpios and enable-gpios. However, power supplies are not
disabled. To save power, the driver can get the power supply regulators
and turn off them in anx7625_power_standby().

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Xin Ji <xji@analogixsemi.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401053202.159302-2-hsinyi@chromium.org

dt-bindings: drm/bridge: anx7625: Add power supplies

anx7625 requires 3 power supply regulators.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401053202.159302-1-hsinyi@chromium.org

Merge tag 'exynos-drm-next-for-v5.13' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

One cleanup
- Based on the patch[1], clean up the use of request_irq function
  series.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next-history.git/commit/?id=cbe16f35bee6880becca6f20d2ebf6b457148552

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1617092998-23645-1-git-send-email-inki.dae@samsung.com

Merge tag 'topic/i915-gem-next-2021-03-26' of ssh://git.freedesktop.org/git/drm/drm into drm-next

special i915-gem-next pull as requested

- Conversion to dma_resv_locking, obj->mm.lock is gone (Maarten, with
  help from Thomas Hellström)
- watchdog (Tvrtko, one patch to cancel individual request from Chris)
- legacy ioctl cleanup (Jason+Ashutosh)
- i915-gem TODO and RFC process doc (me)
- i915_ prefix for vma_lookup (Liam Howlett) just because I spotted it
  and put it in here too

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/YF24MHoOSjpKFEXA@phenom.ffwll.local

drm/i915: Fix docbook header for __intel_runtime_pm_get_if_active()

Fix the

Documentation/gpu/i915:22: /drivers/gpu/drm/i915/intel_runtime_pm.c:423: WARNING: Inline strong start-string without end-string.

warning from the htmldocs build.

Fixes: 9d58aa46291d ("drm/i915: Fix the GT fence revocation runtime PM logic")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210330150118.1105079-1-imre.deak@intel.com

drm/displayid: rename displayid_hdr to displayid_header

Avoid any confusion with High Dynamic Range. No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ce083bd2789c7e22a91710726162287db88e3f6c.1617024940.git.jani.nikula@intel.com

drm/displayid: allow data blocks with 0 payload length

The DisplayID specifications explicitly call out 0 as a valid payload
length for data blocks. The mere presence of a data block, or the
information coded in the block specific data (bits 7:3 in offset 1), may
be enough to convey the necessary information.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d562dff99ba7c92accb654a99b433bed471e8507.1617024940.git.jani.nikula@intel.com

drm/edid: use the new displayid iterator for tile info

Neatly reduce displayid boilerplate in code. Remove excessive debug
logging while at it, no other functional changes.

The old displayid iterator becomes unused; remove it as well as make
drm_find_displayid_extension() static.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fa4b5c790b5bdd82063545a6f209f8e9d78a63a7.1617024940.git.jani.nikula@intel.com

drm/edid: use the new displayid iterator for finding CEA extension

Neatly reduce displayid boilerplate in code. No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e50f876cecbfee369da887ad19350eee0d89b87f.1617024940.git.jani.nikula@intel.com

drm/edid: use the new displayid iterator for detailed modes

Neatly reduce displayid boilerplate in code. No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f6c69c545c553c4a616887540660a4b8aecf0f7f.1617024940.git.jani.nikula@intel.com

drm/displayid: add new displayid section/block iterators

Iterating DisplayID blocks across sections (in EDID extensions) is
unnecessarily complicated for the caller. Implement DisplayID iterators
to go through all blocks in all sections.

Usage example:

const struct displayid_block *block;
struct displayid_iter iter;

displayid_iter_edid_begin(edid, &iter);
displayid_iter_for_each(block, &iter) {
/* operate on block */
}
displayid_iter_end(&iter);

When DisplayID is stored in EDID extensions, the DisplayID sections map
to extensions as described in VESA DisplayID v1.3 Appendix B: DisplayID
as an EDID Extension. This is implemented here.

When DisplayID is stored in its dedicated DDC device 0xA4, according to
VESA E-DDC v1.3, different rules apply for the structure. This is not
implemented here, as we don't currently use it, but the idea is you'd
have a different call for beginning the iteration, for example simply:

displayid_iter_begin(displayid, &iter);

instead of displayid_iter_edid_begin(), and everything else would be
hidden away in the iterator functions.

v2:
- sizeof(struct displayid_block) -> sizeof(*block) (Ville)
- remove __ prefix from displayid_iter_block

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/da3dead1752ab16c061f7bd248ac1a4268f7fefb.1617024940.git.jani.nikula@intel.com

drm/displayid: add separate drm_displayid.c

We'll be adding more DisplayID specific functions going forward, so
start off by splitting out a few functions to a separate file.

We don't bother with exporting the functions; at least for now they
should be needed solely within drm.ko.

No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/07942d5011891b8e8f77245c78b34f4af97a9315.1617024940.git.jani.nikula@intel.com

drm/edid: make a number of functions, parameters and variables const

If there's no need to change it, it should be const. There's more to be
done, but start off with changes that make follow-up work easier. No
functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/41722f92ef81cd6adf65f936fcc5301418e1f94b.1617024940.git.jani.nikula@intel.com

drm/mediatek: Add missing MODULE_DEVICE_TABLE()

This patch adds the missing MODULE_DEVICE_TABLE definitions on different
Mediatek drivers which generates correct modalias for automatic loading
when these drivers are compiled as an external module.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/hdcp: DP HDCP2.2 errata LC_Send_L_Prime=16

Fix LC_Send_L_Prime message timeout to 16 as documented
in DP HDCP 2.2 errata page 3.

https://www.digital-cp.com/sites/default/files/HDCP%202_2_DisplayPort_Errata_v3_0.pdf

Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324113012.7564-3-anshuman.gupta@intel.com

drm/i915/hdcp: Add DP HDCP2.2 timeout to read entire msg

As documented in HDCP 2.2 DP Errata spec transmitter should abort the
authentication protocol in case transmitter has not received the
entire {AKE_Send_Cert, AKE_Send_H_prime, AKE_Send_Paring_Info} msg
within {110,7,5} miliseconds.

Adding above msg timeout values and aborting the HDCP authentication
in case it timedout to read entire msg.

https://www.digital-cp.com/sites/default/files/HDCP%202_2_DisplayPort_Errata_v3_0.pdf

v2:
- Removed redundant variable msg_can_timedout. [Ankit]

Cc: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324113012.7564-2-anshuman.gupta@intel.com

drm/i915/display: Configure HDMI2.1 Pcon for FRL only if Src-Ctl mode is available

Add the check if source control mode is supported by the
PCON, before starting configuring PCON for FRL training,
as per spec VESA DP2.0-HDMI2.1 PCON Draft-1 Sec-7.

v2: Added spec details for the change. (Uma)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323112422.1211-3-ankit.k.nautiyal@intel.com

drm/dp_helper: Define options for FRL training for HDMI2.1 PCON

Currently the FRL training mode (Concurrent, Sequential) and
training type (Normal, Extended) are not defined properly and
are passed as bool values in drm_helpers for pcon
configuration for FRL training.

This patch:
-Add register masks for Sequential and Normal FRL training options.
-Fixes the drm_helpers for FRL Training configuration to use the
 appropriate masks.
-Modifies the calls to the above drm_helpers in i915/intel_dp as per
 the above change.

v2: Re-used the register masks for these options, instead of enum. (Ville)

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323112422.1211-2-ankit.k.nautiyal@intel.com

drm/i915/selftest: Add remap/rotate vma subtests when dst_stride!=width/height

Add selftests to test the POT stride padding functionality added in the
previous patch.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-25-imre.deak@intel.com

drm/i915: Add support for FBs requiring a POT stride alignment

An upcoming platform has a restriction that the FB stride must be
power-of-two aligned. To support framebuffer layouts that are not in
this layout add a logic that pads the tile rows to the POT aligned size.

The HW won't read the padding PTEs, so these don't have to point to an
allocated address, or even have their valid flag set. So use a NULL PTE
instead for instance the scratch page, which is simple and keeps the SG
table compact.

v2:
- Simplify plane_view_dst_stride(). (Ville)
- Pass pitch_tiles as unsigned int.
v3:
- Drop unintentional s/plane_state->rotation/plane_config->rotation/
  change.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-24-imre.deak@intel.com

drm/i915: s/stride/src_stride/ in the intel_remapped_plane_info struct

An upcoming patch adds a new dst_stride field to the
intel_remapped_plane_info struct, so for clarity rename the current
stride field to src_stride.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-23-imre.deak@intel.com

drm/i915/selftest: Unify use of intel_remapped_plane_info in igt_vma_rotate_remap()

Always use the modified copy of the intel_remapped_plane_info variables.
An upcoming patch updates the dst_stride field in these copies after
which we can't use the original versions.

v2: Init view in igt_vma_rotate_remap() when declaring it. (Ville)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-22-imre.deak@intel.com

drm/i915: Shrink the size of intel_remapped_plane_info struct

Save some place in the GTT VMAs by using a u16 instead of unsigned int
to store the view dimensions. The maximum FB stride is 256kB which is
4096 tiles in the worst case (yf-tiles), the maximum FB height is 16k
pixels, which is 16384 tiles in the worst case (linear 4x1 tiled FB).

v2:
- Fix worst case tile height formula in commit log. (Ville)
- Add an assign_chk_ovf helper to simplify the related assignments.
v3:
- Enclose params of the assign_chk_ovf macro in parentheses.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-21-imre.deak@intel.com

drm/i915/intel_fb: Factor out calc_plane_remap_info()

Factor out to a new function the logic to calculate the FB remapping
parameters both during creating the FB and when flipping to it.

v2:
- Keep stride next to offset calculation. (Ville)
- Enclose check_array_bounds macro arguments in parentheses.
v3:
- Rebase on top of the struct intel_fb_view refactoring.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-20-imre.deak@intel.com

drm/i915: Simplify copying the FB view state to the plane state

Instead of copying separately the GTT remapped and color plane view info
from the FB to the plane state, do this by copying the whole
intel_fb_view struct. For this we make sure the FB view state is fully
inited (that is also including the view type) already during FB
creation, so this init is not required during atomic check time. This
also means the we don't need to reset the unused color plane info during
atomic check, as these are already reset during FB creation.

I noticed that initial FBs will only work atm if they are page aligned
(which BIOS most probably always ensures), but add a comment to sanitize
this part once. Also we won't disable the plane if
get_initial_plane_config() failed for some reason (for instance due to
unsupported rotation), add a TODO: comment for this too.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-19-imre.deak@intel.com

drm/i915: Store the normal view FB pitch in FB's intel_fb_view

Instead of special casing getting the pitch for the normal view, store
it during FB creation to the FB normal view struct and retrieve it from
there during atomic check, as it's done for the rotated view. A
follow-up patch does the same for a new FB remapped view.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-18-imre.deak@intel.com

drm/i915: Unify the FB and plane state view information into one struct

To allow the simplification of FB/plane view computation in the
follow-up patches, unify the corresponding state in the
intel_framebuffer and intel_plane_state structs into a new intel_fb_view
struct.

This adds some overhead to intel_framebuffer as the rotated view will
have now space for 4 color planes instead of the required 2 and it'll
also contain the unused offset for each color_plane info. Imo this is an
acceptable trade-off to get a simplified way of the remap computation.

Use the new intel_fb_view struct for the FB normal view as well, so (in
the follow-up patches) we can remove the special casing for normal view
calculation wrt. the calculation of remapped/rotated views. This also
adds an overhead to the intel_framebuffer struct, as the gtt remap info
and per-color plane offset/pitch is not required for the normal view,
but imo this is an acceptable trade-off as above. The per-color plane
pitch filed will be used by a follow-up patch, so we can retrieve the
pitch for each view in the same way.

No functional changes in this patch.

v2:
- Make the patch have _no functional change_.
  (fix skl_check_nv12_aux_surface() and skl_check_main_surface()).
- s/i915_color_plane_view::pitch/stride/ (Ville)

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-17-imre.deak@intel.com

drm/i915/intel_fb: Factor out calc_plane_normal_size()

Factor out to a new function the logic to calculate an FB plane's
normal-view size.

Instead of using intel_remapped_plane_info, which is related only to
remapping, add a helper to get the tile pitch and rows for an FB plane,
so these helpers can be used both by the normal size calculation and the
remapping code.

Also add a new fb_plane_view_dims struct in which we can pass around the
view (either FB plane or plane source) and tile dimensions conveniently
to functions calculating further view parameters.

v2:
- Add back the +1 tile adjustment for x!=0 in calc_plane_normal_size(). (Ville)
- s/pages/tiles/ in calc_plane_normal_size(). (Ville)
- Add a helper for the plane view width calculation. (Ville)
- Return tiles as unsigned int from calc_plane_normal_size().

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-16-imre.deak@intel.com

drm/i915/intel_fb: Factor out calc_plane_aligned_offset()

Factor out to a new function the logic to convert the FB plane x/y
values to a tile size based offset and new x/y relative to this offset.
This makes intel_fill_fb_info() and intel_plane_remap_gtt() somewhat
more readable.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-15-imre.deak@intel.com

drm/i915/intel_fb: Factor out convert_plane_offset_to_xy()

Factor out to a new function the logic to convert the FB plane offset to
x/y and check the validity of x/y, with the goal to make
intel_fill_fb_info() more readable.

v2: Use &fb->base instead of a drm_fb alias. (Ville)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-14-imre.deak@intel.com

drm/i915/intel_fb: s/dev_priv/i915/

Rename dev_priv to i915 in the intel_fb.[ch] files.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-13-imre.deak@intel.com

drm/i915/intel_fb: Unexport intel_fb_check_stride()

After the previous patch we can unexport intel_fb_check_stride(), which
isn't needed by intel_display.c.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-12-imre.deak@intel.com

drm/i915/intel_fb: Pull FB plane functions from intel_display.c

Move the FB plane specific functions from intel_display.c to intel_fb.c.
There's more functions like this, but I leave moving those as well for a
follow up, and for now moving only the ones needed by the end of this
patchset (adding support for padding tile-rows in an FB GGTT view).

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-11-imre.deak@intel.com

drm/i915/intel_fb: Pull FB plane functions from intel_sprite.c

Move the FB plane specific function from intel_sprite.c to intel_fb.c

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-10-imre.deak@intel.com

drm/i915/intel_fb: Pull is_surface_linear() from intel_display.c/skl_universal_plane.c

Move is_surface_linear() to intel_fb.c and export it from here, also
removing the duplicate definitions of it.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-9-imre.deak@intel.com

drm/i915/intel_fb: Pull FB plane functions from skl_universal_plane.c

Move the FB plane related functions from skl_universal_plane.c to
intel_fb.c.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-8-imre.deak@intel.com

drm/i915/intel_fb: Pull FB plane functions from intel_display_types.h

Start collecting all the FB plane related functions into a new intel_fb.c
file.

v2: Drop display/ part of header includes. (Ville)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-7-imre.deak@intel.com

drm/i915/selftest: Make sure to init i915_ggtt_view in igt_vma_rotate_remap()

This probably doesn't cause an issue, since the code checks the view
type dependent size of the views before comparing them, but let's follow
the practice to bzero the whole struct when initializing it.

v2: Use {} instead of { } struct intializer. (Ville)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-6-imre.deak@intel.com

drm/i915: Make sure i915_ggtt_view is inited when creating an FB

This probably doesn't cause an issue, since the code checks the view
type dependent size of the views before comparing them, but let's follow
the practice to bzero the whole struct when initializing it.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-5-imre.deak@intel.com

drm/i915/selftest: Fix debug message in igt_vma_remapped_gtt()

The expected/found values were swapped in a debug message, fix this up.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-4-imre.deak@intel.com

drm/i915/selftest: Fix error handling in igt_vma_remapped_gtt()

An inner scope version of err shadows the variable in the outer scope,
and err doesn't get set after a failure, fix these.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-3-imre.deak@intel.com

drm/i915: Fix rotation setup during plane HW readout

The HW plane state is cleared and inited after we store the rotation to
it, so store it instead to the uapi state to match what we do with all
other plane state until intel_plane_copy_uapi_to_hw_state() is called.

Rotation for initial FBs is not supported atm, but let's still fix the
plane state setup here.

While at it remove the redundant intel_state->uapi.src/dst init, which
will be done in intel_plane_copy_uapi_to_hw_state().

v2: Remove redundant intel_state->uapi.src/dst init. (Ville)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325214808.2071517-2-imre.deak@intel.com

drm/i915: Remove repeated declaration

struct drm_i915_private, struct intel_crtc_state and
struct intel_crtc is declared twice.
Remove the duplicate.

Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326012527.875026-1-wanjiabing@vivo.com

drm/i915: Stop adding planes to the commit needlessly

The dbuf bandwidth calculations don't need the planes to be
added to the state. Each plane's data rate has already been
precalculated and stored in the crtc state, and that with
the dbuf slice usage for each plane is all the dbuf bandwidth
code needs to figure out what the minimum cdclk is.

What we're trying to do here is make sure each plane recalculates
its minimum cdclk (ie. plane->min_cdclk()) on those platforms where
the number of active planes affects the result of said calculation.
Nothing to do with any dbuf cdclk requirements.

Not sure if we had stuff in slightly different order or what,
but at least in the current scheme this is not necessary.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325004415.17432-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/mediatek: crtc: Make config-updating atomic

While updating config, the irq would occur and get the partial
config, so use variable config_updating to make updating atomic.

Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

drm/ingenic: Register devm action to cleanup encoders

Since the encoders have been devm-allocated, they will be freed way
before drm_mode_config_cleanup() is called. To avoid use-after-free
conditions, we then must ensure that drm_encoder_cleanup() is called
before the encoders are freed.

v2: Use the new __drmm_simple_encoder_alloc() function

v3: Use the new drmm_plain_simple_encoder_alloc() macro

v4: Use drmm_plain_encoder_alloc() macro

Fixes: c369cb27c267 ("drm/ingenic: Support multiple panels/bridges")
Cc: <stable@vger.kernel.org> # 5.8+
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210327115742.18986-4-paul@crapouillou.net

drm/encoder: Add macro drmm_plain_encoder_alloc()

This performs the same operation as drmm_encoder_alloc(), but
only allocates and returns a struct drm_encoder instance.

v4: Rename macro drmm_plain_encoder_alloc() and move to
    <drm/drm_encoder.h>. Since it's not "simple" anymore it
    will now take funcs/name arguments as well.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210327115742.18986-3-paul@crapouillou.net

drm: bridge/panel: Cleanup connector on bridge detach

If we don't call drm_connector_cleanup() manually in
panel_bridge_detach(), the connector will be cleaned up with the other
DRM objects in the call to drm_mode_config_cleanup(). However, since our
drm_connector is devm-allocated, by the time drm_mode_config_cleanup()
will be called, our connector will be long gone. Therefore, the
connector must be cleaned up when the bridge is detached to avoid
use-after-free conditions.

v2: Cleanup connector only if it was created

v3: Add FIXME

v4: (Use connector->dev) directly in if() block

Fixes: 13dfc0540a57 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bridge.")
Cc: <stable@vger.kernel.org> # 4.12+
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210327115742.18986-2-paul@crapouillou.net

drm/i915: rename i915_rev_steppings->intel_step_info

Matter of taste. Match the prefix for everything else related to
steppings. No functional changes.

Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d3ba7c448e596fd2425a29bcc7ea8493505a30f9.1616764798.git.jani.nikula@intel.com

drm/i915: rename disp_stepping->display_step and gt_stepping->gt_step

Matter of taste. Step matches the enums.

Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1724c8bde0e0f596240437d72ace60b9c34ae9db.1616764798.git.jani.nikula@intel.com

drm/i915: rename DISP_STEPPING->DISPLAY_STEP and GT_STEPPING->GT_STEP

Matter of taste. STEP matches the enums.

Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf2dccd1c9c7fdcf5de08ea10a9265292b45d8c7.1616764798.git.jani.nikula@intel.com

drm/i915: switch TGL and ADL to the new stepping scheme

This changes the way revids not present in the array are handled:

- For gaps in the array, the next present revid is used.

- For revids beyond the array, the new STEP_FUTURE is used instead of
  the last revid in the array.

In both cases, we'll get debug logging of what's going on.

v2: Rename stepping->step

Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/756fe3d75b1e91ef812fc1fd3f70337e9c571d91.1616764798.git.jani.nikula@intel.com

drm/i915: switch KBL to the new stepping scheme

Add new symbolic names for revision ids, and convert KBL revids to use
them via the new stepping check macros.

This also fixes theoretical out of bounds access to kbl_revids array.

v3: upgrade dbg to warn on unknown revid (José)

v2: Rename stepping->step

Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/79b6c48211c6b214165391d350d556bad748f747.1616764798.git.jani.nikula@intel.com

drm/i915: add new helpers for accessing stepping info

Add new runtime info field for stepping. Add new helpers for accessing
them. As we'll be switching platforms over to the new scheme
incrementally, check for non-initialized steppings.

In case a platform does not have separate display and gt steppings, it's
okay to use a common shorthand. However, in this case the display
stepping must not be initialized, and gt stepping is the single point of
truth.

v3: Remove IS_STEP() (José)

v2: Rename stepping->step

Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bb4275733fa390ea3dbf6f62794d55b616665230.1616764798.git.jani.nikula@intel.com

drm/i915: split out stepping info to a new file

gt/intel_workarounds.c is decidedly the wrong place for handling
stepping info. Add new intel_step.[ch] for the data, and move the
stepping arrays there. No functional changes.

v2: Rename stepping->step

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f69baf82819a8a35815fca25a520de5c38a7e1b5.1616764798.git.jani.nikula@intel.com

drm/exynos: move to use request_irq by IRQF_NO_AUTOEN flag

After this patch cbe16f35bee68 genirq: Add IRQF_NO_AUTOEN for
request_irq/nmi() is merged. request_irq() after setting
IRQ_NOAUTOEN as below

irq_set_status_flags(irq, IRQ_NOAUTOEN);
request_irq(dev, irq...);
can be replaced by request_irq() with IRQF_NO_AUTOEN flag.

v2:
Fix the problem of using wrong flags

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Merge tag 'irq-no-autoen-2021-03-25' of git://git./linux/kernel/git/tip/tip into exynos-drm-next

Tag for the input subsystem to pick up

drm/ttm: switch back to static allocation limits for now

The shrinker based approach still has some flaws. Especially that we need
temporary pages to free up the pages allocated to the driver is problematic
in a shrinker.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324134845.2338-1-christian.koenig@amd.com

Merge tag 'drm-next-20210322' of git://linuxtv.org/pinchartl/media into drm-next

Conversion of misc display DT bindings to YAML

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YFgOFL/yMUkyxqK3@pendragon.ideasonboard.com

drm/mst: Enhance MST topology logging

[why]
MST topology print was missing fec logging and pdt printed
as an int wasn't clear. vcpi and payload info was printed as an
arbitrary series of ints which requires user to know the ordering
of the prints, making the logs difficult to use.

[how]
-add fec logging
-add pdt parsing into strings
-format vcpi and payload info into tables with headings
-clean up topology prints
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325180614.37060-1-eryk.brol@amd.com

drm/ttm: fix invalid NULL deref

The BO might be NULL in this function, use the bdev directly.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Fixes: a1f091f8ef2b ("drm/ttm: switch to per device LRU lock")
Link: https://patchwork.freedesktop.org/patch/msgid/20210325152740.82633-1-christian.koenig@amd.com

Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.13-2021-03-23:

amdgpu:
- Debugfs cleanup
- Various cleanups and spelling fixes
- Flexible array cleanups
- Initial AMD Freesync HDMI
- Display fixes
- 10bpc dithering improvements
- Display ASSR support
- Clean up and unify powerplay and swsmu interfaces
- Vangogh fixes
- Add SMU gfx busy queues for RV/PCO
- PCIE DPM fixes
- S0ix fixes
- GPU metrics data fixes
- DCN secure display support
- Backlight type override
- Add initial support for Aldebaran
- RAS fixes
- Prime fixes for A+A systems
- Reset fixes
- Initial resource cursor support
- Drop legacy IO BAR requirements
- Various power fixes

amdkfd:
- MMU notifier fixes
- APU fixes

radeon:
- Debugfs cleanups
- Flexible array cleanups

UAPI:
- amdgpu: Add a new INFO ioctl interface to query video capabilities
  rather than hardcoding them in userspace.  This allows us to provide
  fine grained asic capabilities (e.g., if a particular part is
  bandwidth limited, we can limit the capabilities).  Proposed userspace:
  https://gitlab.freedesktop.org/leoliu/drm/-/commits/info_video_caps
  https://gitlab.freedesktop.org/leoliu/mesa/-/commits/info_video_caps
- amdkfd: bump the driver version.  There was a problem with reporting
  some RAS features on older versions of the driver. Proposed userspace:
  https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/commit/7cdd63475c36bb9f49bb960f90f9a8cdb7e80a21

Danvet: A bunch of conflicts all over, but it seems to compile ... I
did put the call to dc_allow_idle_optimizations() on a single line
since it looked a bit too jarring to be left alone.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210324040147.1990338-1-alexander.deucher@amd.com

drm/bridge: Introduce LT8912B DSI to HDMI bridge

Lontium LT8912B is a DSI to HDMI bridge.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326121955.1266230-3-adrien.grassein@gmail.com

dt-bindings: display: bridge: Add documentation for LT8912B

Lontium LT8912B is a DSI to HDMI bridge.

Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326121955.1266230-2-adrien.grassein@gmail.com

drm: Fix 3 typos in the inline doc

Fix the following typos:

1. When mentioning a list of functions, the function
drm_atomic_helper_disable_plane is mentioned twice.

2. drop the word 'afterwards':
s/afterwards after that/after that/'

3. drop extra 'the':
s/but do not the support the full/but do not support the full/

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210326103216.7918-1-dafna.hirschfeld@collabora.com

drm/doc: Add RFC section

Motivated by the pre-review process for i915 gem/gt features, but
probably useful in general for complex stuff.

v2: Add reminder to not forget userspace projects in the discussion
(Simon, Jason)

v3: Actually put this into a folder, so we have it all (.rst files and
headers for kerneldoc) contained somewhere separate (Jason)

Cc: Simon Ser <contact@emersion.fr>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Simon Ser <contact@emersion.fr>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210325225859.1684116-1-daniel.vetter@ffwll.ch