drm/i915: Remove gen6_ppgtt_unpin_all

gen6_ppgtt_unpin_all is unused, kill it.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028125855.3281674-3-matthew.auld@intel.com

drm/i915/ttm: Failsafe migration blits

If the initial fill blit or copy blit of an object fails, the old
content of the data might be exposed and read as soon as either CPU- or
GPU PTEs are set up to point at the pages.

Intercept the blit fence with an async callback that checks the
blit fence for errors and if there are errors performs an async cpu blit
instead. If there is a failure to allocate the async dma_fence_work,
allocate it on the stack and sync wait for the blit to complete.

Add selftests that simulate gpu blit failures and failure to allocate
the async dma_fence_work.

A previous version of this pach used dma_fence_work, now that's
opencoded which adds more code but might lower the latency
somewhat in the common non-error case.

v3:
- Style fixes (Matthew Auld)
v4:
- Use "#if IS_ENABLED()" instead of #ifdef (Matthew Auld)
v5:
- Fix an issue where we, if the dependency was already signaled, might
  end up waiting for a memcpy fence that would never signal.
v6:
- Add a missing i915_ttm_memcpy_release() (Matthew Auld)

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211104110718.688420-3-thomas.hellstrom@linux.intel.com

drm/i915/ttm: Reorganize the ttm move code

We are about to introduce failsafe- and asynchronous migration and
ttm moves.
This will add complexity and code to the TTM move code so it makes sense
to split it out to a separate file to make the i915 TTM code easer to
digest.
Split the i915 TTM move code out and since we will have to change the name
of the gpu_binds_iomem() and cpu_maps_iomem() functions anyway,
we alter the name of gpu_binds_iomem() to i915_ttm_gtt_binds_lmem() which
is more reflecting what it is used for.
With this we also add some more documentation. Otherwise there should be
no functional change.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211104110718.688420-2-thomas.hellstrom@linux.intel.com

drm/i915: fixup dma_fence_wait usage

dma_fence_wait expects a boolean for whether it should be interruptible,
not a timeout value.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211102155055.100138-1-matthew.auld@intel.com

drm/i915/guc/slpc: Update boost sysfs hooks for SLPC

Add a helper to sort through the SLPC/RPS paths of get/set methods.
Boost frequency will be modified as long as it is within the constraints
of RP0 and if it is different from the existing one. We will set min
freq to boost only if there is at least one active waiter.

v2: Add num_boosts to guc_slpc_info and changes for worker function
v3: Review comments (Ashutosh)

Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211102012608.8609-4-vinay.belgaumkar@intel.com

drm/i915/guc/slpc: Add waitboost functionality for SLPC

Add helper in RPS code for handling SLPC and non-SLPC paths.
When boost is requested in the SLPC path, we can ask GuC to ramp
up the frequency req by setting the minimum frequency to boost freq.
Reset freq back to the min softlimit when there are no more waiters.

v2: Schedule a worker thread which can boost freq from within
an interrupt context as well.

v3: No need to check against requested freq before scheduling boost
work (Ashutosh)

Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211102012608.8609-3-vinay.belgaumkar@intel.com

drm/i915/guc/slpc: Define and initialize boost frequency

Define helpers and struct members required to record boost info.
Boost frequency is initialized to RP0 at SLPC init. Also define num_waiters
which can track the pending boost requests.

Boost will be done by scheduling a worker thread. This will avoid
the need to make H2G calls inside an interrupt context. Initialize the
worker function during SLPC init as well. Had to move intel_guc_slpc_init
a few lines below to accommodate this.

v2: Add a workqueue to handle waitboost
v3: Code review comments (Ashutosh)

Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211102012608.8609-2-vinay.belgaumkar@intel.com

drm/i915: Rename GT_STEP to GRAPHICS_STEP

As now graphics and media can have different steppings this patch is
renaming all _GT_STEP macros to _GRAPHICS_STEP.

Future platforms will properly choose between _MEDIA_STEP and
_GRAPHICS_STEP for each new workaround.

Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020002353.193893-3-jose.souza@intel.com

drm/i915: Track media IP stepping separated from GT

Graphics and media IPs can have different stepping so a new field is
needed in intel_step_info.

The next patch will take care of rename gt_step to graphics_step.

Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020002353.193893-2-jose.souza@intel.com

drm/i915: Add struct to hold IP version

Adding a structure to standardize access to IP versioning as future
platforms will have this information populated at runtime.

The constant platform display version is not using this new struct but
the runtime variant will definitely use it.

Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020002353.193893-1-jose.souza@intel.com

drm/i915/dmabuf: drop the flush on discrete

We were overzealous here; even though discrete is non-LLC, it should
still be always coherent.

v2(Thomas & Daniel)
  - Be extra cautious and limit to DG1
  - Add some more commentary

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211029122137.3484203-1-matthew.auld@intel.com

drm/i915: stop setting cache_dirty on discrete

Should not be needed. Even with non-coherent display, we should be using
device local-memory there, and not system memory.

v2: also add a warning in i915_gem_clflush_object

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20211027161813.3094681-4-matthew.auld@intel.com

drm/i915: move cpu_write_needs_clflush

Move it next to its partner in crime; gpu_write_needs_clflush. For
better readability lets keep gpu vs cpu at least in the same file.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027161813.3094681-3-matthew.auld@intel.com

drm/i915/clflush: disallow on discrete

We seem to have an unfortunate issue where we arrive from:

    i915_gem_object_flush_if_display+0x86/0xd0 [i915]
    intel_user_framebuffer_dirty+0x1a/0x50 [i915]
    drm_mode_dirtyfb_ioctl+0xfb/0x1b0

which can be before the pages are populated(and pinned for display), and
so i915_gem_object_has_struct_page() might still return true, as per the
ttm backend. We could re-order the later get_pages() call here, but
since on discrete everything should already be coherent, with the
exception of the display engine, and even there display surfaces must be
allocated in device local-memory anyway, so there should in theory be no
conceivable reason to ever call i915_gem_clflush_object() on discrete.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/4320
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027161813.3094681-2-matthew.auld@intel.com

drm/i915/clflush: fixup handling of cache_dirty

In theory if clflush_work_create() somehow fails here, and we don't yet
have mm.pages populated then we end up resetting cache_dirty, which is
likely wrong, since that will potentially skip the flush-on-acquire, if
it was needed.

It looks like intel_user_framebuffer_dirty() can arrive here before the
pages are populated.

v2(Thomas):
  - Move setting cache_dirty out of the async portion, also add a
    comment for why that should still be safe.
v3:
  - Add Thomas' irc r-b

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027161813.3094681-1-matthew.auld@intel.com

drm/i915: Introduce refcounted sg-tables

As we start to introduce asynchronous failsafe object migration,
where we update the object state and then submit asynchronous
commands we need to record what memory resources are actually used
by various part of the command stream. Initially for three purposes:

1) Error capture.
2) Asynchronous migration error recovery.
3) Asynchronous vma bind.

At the time where these happens, the object state may have been updated
to be several migrations ahead and object sg-tables discarded.

In order to make it possible to keep sg-tables with memory resource
information for these operations, introduce refcounted sg-tables that
aren't freed until the last user is done with them.

The alternative would be to reference information sitting on the
corresponding ttm_resources which typically have the same lifetime as
these refcountes sg_tables, but that leads to other awkward constructs:
Due to the design direction chosen for ttm resource managers that would
lead to diamond-style inheritance, the LMEM resources may sometimes be
prematurely freed, and finally the subclassed struct ttm_resource would
have to bleed into the asynchronous vma bind code.

v3:
- Address a number of style issues (Matthew Auld)
v4:
- Dont check for st->sgl being NULL in i915_ttm_tt__shmem_unpopulate(),
  that should never happen. (Matthew Auld)
v5:
- Fix a Potential double-free (Matthew Auld)

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211101122444.114607-1-thomas.hellstrom@linux.intel.com

drm/i915: Enable WaProgramMgsrForCorrectSliceSpecificMmioReads for Gen9

This implements WaProgramMgsrForCorrectSliceSpecificMmioReads which
was omitted by mistake from Gen9 documentation, while it is actually
applicable to fused off parts.

Workaround consists of making sure MCR packet control register is
programmed to point to enabled slice/subslice pair before doing any
MMIO reads from the affected registers.

Failure do to this can result in complete system hangs when running
certain workloads. Two known cases which can cause system hangs are:

1. "test_basic progvar_prog_scope_uninit" test which is part of
    Khronos OpenCL conformance suite
    (https://github.com/KhronosGroup/OpenCL-CTS) with the Intel
    OpenCL driver (https://github.com/intel/compute-runtime).

2. VP8 media hardware encoding using the full-feature build of the
    Intel media-driver (https://github.com/intel/media-driver) and
    ffmpeg.

For the former case patch was verified to fix the hard system hang
when executing the OCL test on Intel Pentium CPU 6405U which contains
fused off GT1 graphics.

Reference: HSD#1508045018,1405586840, BSID#0575

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: William Tseng <william.tseng@intel.com>
Cc: Shawn C Lee <shawn.c.lee@intel.com>
Cc: Pawel Wilma <pawel.wilma@intel.com>
Signed-off-by: Cooper Chiou <cooper.chiou@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025042623.3876-1-cooper.chiou@intel.com

drm/i915: Remove some dead struct fwd decl from i915_drv.h

Gone with userptr rewrite by Maarten in ed29c2691188 ("drm/i915: Fix
userptr so we do not have to worry about obj->mm.lock, v7.")

Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022082200.2684194-1-daniel.vetter@ffwll.ch

drm/i915/gtt: stop caching the scratch page

Normal users shouldn't be hitting this, likely this would indicate a
userspace bug. So don't bother caching, which should be safe now that we
manually flush the page.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028092638.3142258-2-matthew.auld@intel.com

drm/i915/gtt: flush the scratch page

The scratch page is directly visible in the users address space, and
while this is forced as CACHE_LLC, by the kernel, we still have to
contend with things like "Bypass-LLC" MOCS. So just flush no matter
what.

v2(Thomas):
  - Make sure we use drm_clflush_virt_range here, in case clflush support
    is missing.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028092638.3142258-1-matthew.auld@intel.com

drm/i915/pmu: Connect engine busyness stats from GuC to pmu

With GuC handling scheduling, i915 is not aware of the time that a
context is scheduled in and out of the engine. Since i915 pmu relies on
this info to provide engine busyness to the user, GuC shares this info
with i915 for all engines using shared memory. For each engine, this
info contains:

- total busyness: total time that the context was running (total)
- id: id of the running context (id)
- start timestamp: timestamp when the context started running (start)

At the time (now) of sampling the engine busyness, if the id is valid
(!= ~0), and start is non-zero, then the context is considered to be
active and the engine busyness is calculated using the below equation

engine busyness = total + (now - start)

All times are obtained from the gt clock base. For inactive contexts,
engine busyness is just equal to the total.

The start and total values provided by GuC are 32 bits and wrap around
in a few minutes. Since perf pmu provides busyness as 64 bit
monotonically increasing values, there is a need for this implementation
to account for overflows and extend the time to 64 bits before returning
busyness to the user. In order to do that, a worker runs periodically at
frequency = 1/8th the time it takes for the timestamp to wrap. As an
example, that would be once in 27 seconds for a gt clock frequency of
19.2 MHz.

Note:
There might be an over-accounting of busyness due to the fact that GuC
may be updating the total and start values while kmd is reading them.
(i.e kmd may read the updated total and the stale start). In such a
case, user may see higher busyness value followed by smaller ones which
would eventually catch up to the higher value.

v2: (Tvrtko)
- Include details in commit message
- Move intel engine busyness function into execlist code
- Use union inside engine->stats
- Use natural type for ping delay jiffies
- Drop active_work condition checks
- Use for_each_engine if iterating all engines
- Drop seq locking, use spinlock at GuC level to update engine stats
- Document worker specific details

v3: (Tvrtko/Umesh)
- Demarcate GuC and execlist stat objects with comments
- Document known over-accounting issue in commit
- Provide a consistent view of GuC state
- Add hooks to gt park/unpark for GuC busyness
- Stop/start worker in gt park/unpark path
- Drop inline
- Move spinlock and worker inits to GuC initialization
- Drop helpers that are called only once

v4: (Tvrtko/Matt/Umesh)
- Drop addressed opens from commit message
- Get runtime pm in ping, remove from the park path
- Use cancel_delayed_work_sync in disable_submission path
- Update stats during reset prepare
- Skip ping if reset in progress
- Explicitly name execlists and GuC stats objects
- Since disable_submission is called from many places, move resetting
  stats to intel_guc_submission_reset_prepare

v5: (Tvrtko)
- Add a trylock helper that does not sleep and synchronize PMU event
  callbacks and worker with gt reset

v6: (CI BAT failures)
- DUTs using execlist submission failed to boot since __gt_unpark is
  called during i915 load. This ends up calling the GuC busyness unpark
  hook and results in kick-starting an uninitialized worker. Let
  park/unpark hooks check if GuC submission has been initialized.
- drop cant_sleep() from trylock helper since rcu_read_lock takes care
  of that.

v7: (CI) Fix igt@i915_selftest@live@gt_engines
- For GuC mode of submission the engine busyness is derived from gt time
  domain. Use gt time elapsed as reference in the selftest.
- Increase busyness calculation to 10ms duration to ensure batch runs
  longer and falls within the busyness tolerances in selftest.

v8:
- Use ktime_get in selftest as before
- intel_reset_trylock_no_wait results in a lockdep splat that is not
  trivial to fix since the PMU callback runs in irq context and the
  reset paths are tightly knit into the driver. The test that uncovers
  this is igt@perf_pmu@faulting-read. Drop intel_reset_trylock_no_wait,
  instead use the reset_count to synchronize with gt reset during pmu
  callback. For the ping, continue to use intel_reset_trylock since ping
  is not run in irq context.

- GuC PM timestamp does not tick when GuC is idle. This can potentially
  result in wrong busyness values when a context is active on the
  engine, but GuC is idle. Use the RING TIMESTAMP as GPU timestamp to
  process the GuC busyness stats. This works since both GuC timestamp and
  RING timestamp are synced with the same clock.

- The busyness stats may get updated after the batch starts running.
  This delay causes the busyness reported for 100us duration to fall
  below 95% in the selftest. The only option at this time is to wait for
  GuC busyness to change from idle to active before we sample busyness
  over a 100us period.

Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027004821.66097-2-umesh.nerlige.ramappa@intel.com

drm/i915/pmu: Add a name to the execlists stats

In preparation for GuC pmu stats, add a name to the execlists stats
structure so that it can be differentiated from the GuC stats.

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027004821.66097-1-umesh.nerlige.ramappa@intel.com

drm/i915: Revert 'guc_id' from i915_request tracepoint

Avoid adding backend specific data to the tracepoints outside of
the LOW_LEVEL_TRACEPOINTS kernel config protection. These bits of
information are bound to change depending on the selected submission
method per platform and are not necessarily possible to maintain in
the future.

Fixes: dbf9da8d55ef ("drm/i915/guc: Add trace point for GuC submit")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027093255.66489-1-joonas.lahtinen@linux.intel.com

MAINTAINERS: Add Tvrtko as drm/i915 co-maintainer

Add Tvrtko Ursulin as a co-maintainer for drm/i915 driver.
Tvrtko will bring added bandwidth and focus to the GT/GEM domain
(drm-intel-gt-next).

This will help with the increased driver maintenance efforts, allows
alternating the drm-intel-gt-next pull requests and also should increase
the coverage for the maintenance in general.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025134907.20078-1-joonas.lahtinen@linux.intel.com

drm/i915: Use ERR_CAST instead of ERR_PTR(PTR_ERR())

Fix following coccicheck warning:
./drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c:3117:15-22: WARNING:
ERR_CAST can be used with eb->requests[i].

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025113316.24424-1-wanjiabing@vivo.com

drm/i915/selftests: Fix inconsistent IS_ERR and PTR_ERR

Fix inconsistent IS_ERR and PTR_ERR in i915_gem_dmabuf.c

Signed-off-by: Kai Song <songkai01@inspur.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022120655.22173-1-songkai01@inspur.com

drm/i915/guc: Fix recursive lock in GuC submission

Use __release_guc_id (lock held) rather than release_guc_id (acquires
lock), add lockdep annotations.

213.280129] i915: Running i915_perf_live_selftests/live_noa_gpr
[ 213.283459] ============================================
[ 213.283462] WARNING: possible recursive locking detected
{{[ 213.283466] 5.15.0-rc6+ #18 Tainted: G U W }}
[ 213.283470] --------------------------------------------
[ 213.283472] kworker/u24:0/8 is trying to acquire lock:
[ 213.283475] ffff8ffc4f6cc1e8 (&guc->submission_state.lock){....}-{2:2}, at: destroyed_worker_func+0x2df/0x350 [i915]
{{[ 213.283618] }}
{{ but task is already holding lock:}}
[ 213.283621] ffff8ffc4f6cc1e8 (&guc->submission_state.lock){....}-{2:2}, at: destroyed_worker_func+0x4f/0x350 [i915]
{{[ 213.283720] }}
{{ other info that might help us debug this:}}
[ 213.283724] Possible unsafe locking scenario:[ 213.283727] CPU0
[ 213.283728] ----
[ 213.283730] lock(&guc->submission_state.lock);
[ 213.283734] lock(&guc->submission_state.lock);
{{[ 213.283737] }}
{{ *** DEADLOCK ***}}[ 213.283740] May be due to missing lock nesting notation[ 213.283744] 3 locks held by kworker/u24:0/8:
[ 213.283747] #0: ffff8ffb80059d38 ((wq_completion)events_unbound){..}-{0:0}, at: process_one_work+0x1f3/0x550
[ 213.283757] #1: ffffb509000e3e78 ((work_completion)(&guc->submission_state.destroyed_worker)){..}-{0:0}, at: process_one_work+0x1f3/0x550
[ 213.283766] #2: ffff8ffc4f6cc1e8 (&guc->submission_state.lock){....}-{2:2}, at: destroyed_worker_func+0x4f/0x350 [i915]
{{[ 213.283860] }}
{{ stack backtrace:}}
[ 213.283863] CPU: 8 PID: 8 Comm: kworker/u24:0 Tainted: G U W 5.15.0-rc6+ #18
[ 213.283868] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021
[ 213.283873] Workqueue: events_unbound destroyed_worker_func [i915]
[ 213.283957] Call Trace:
[ 213.283960] dump_stack_lvl+0x57/0x72
[ 213.283966] __lock_acquire.cold+0x191/0x2d3
[ 213.283972] lock_acquire+0xb5/0x2b0
[ 213.283978] ? destroyed_worker_func+0x2df/0x350 [i915]
[ 213.284059] ? destroyed_worker_func+0x2d7/0x350 [i915]
[ 213.284139] ? lock_release+0xb9/0x280
[ 213.284143] _raw_spin_lock_irqsave+0x48/0x60
[ 213.284148] ? destroyed_worker_func+0x2df/0x350 [i915]
[ 213.284226] destroyed_worker_func+0x2df/0x350 [i915]
[ 213.284310] process_one_work+0x270/0x550
[ 213.284315] worker_thread+0x52/0x3b0
[ 213.284319] ? process_one_work+0x550/0x550
[ 213.284322] kthread+0x135/0x160
[ 213.284326] ? set_kthread_struct+0x40/0x40
[ 213.284331] ret_from_fork+0x1f/0x30

and a bit later in the trace:

{{ 227.499864] do_raw_spin_lock+0x94/0xa0}}
[ 227.499868] _raw_spin_lock_irqsave+0x50/0x60
[ 227.499871] ? guc_flush_destroyed_contexts+0x4f/0xf0 [i915]
[ 227.499995] guc_flush_destroyed_contexts+0x4f/0xf0 [i915]
[ 227.500104] intel_guc_submission_reset_prepare+0x99/0x4b0 [i915]
[ 227.500209] ? mark_held_locks+0x49/0x70
[ 227.500212] intel_uc_reset_prepare+0x46/0x50 [i915]
[ 227.500320] reset_prepare+0x78/0x90 [i915]
[ 227.500412] __intel_gt_set_wedged.part.0+0x13/0xe0 [i915]
[ 227.500485] intel_gt_set_wedged.part.0+0x54/0x100 [i915]
[ 227.500556] intel_gt_set_wedged_on_fini+0x1a/0x30 [i915]
[ 227.500622] intel_gt_driver_unregister+0x1e/0x60 [i915]
[ 227.500694] i915_driver_remove+0x4a/0xf0 [i915]
[ 227.500767] i915_pci_probe+0x84/0x170 [i915]
[ 227.500838] local_pci_probe+0x42/0x80
[ 227.500842] pci_device_probe+0xd9/0x190
[ 227.500844] really_probe+0x1f2/0x3f0
[ 227.500847] __driver_probe_device+0xfe/0x180
[ 227.500848] driver_probe_device+0x1e/0x90
[ 227.500850] __driver_attach+0xc4/0x1d0
[ 227.500851] ? __device_attach_driver+0xe0/0xe0
[ 227.500853] ? __device_attach_driver+0xe0/0xe0
[ 227.500854] bus_for_each_dev+0x64/0x90
[ 227.500856] bus_add_driver+0x12e/0x1f0
[ 227.500857] driver_register+0x8f/0xe0
[ 227.500859] i915_init+0x1d/0x8f [i915]
[ 227.500934] ? 0xffffffffc144a000
[ 227.500936] do_one_initcall+0x58/0x2d0
[ 227.500938] ? rcu_read_lock_sched_held+0x3f/0x80
[ 227.500940] ? kmem_cache_alloc_trace+0x238/0x2d0
[ 227.500944] do_init_module+0x5c/0x270
[ 227.500946] __do_sys_finit_module+0x95/0xe0
[ 227.500949] do_syscall_64+0x38/0x90
[ 227.500951] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 227.500953] RIP: 0033:0x7ffa59d2ae0d
[ 227.500954] Code: c8 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3b 80 0c 00 f7 d8 64 89 01 48
[ 227.500955] RSP: 002b:00007fff320bbf48 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 227.500956] RAX: ffffffffffffffda RBX: 00000000022ea710 RCX: 00007ffa59d2ae0d
[ 227.500957] RDX: 0000000000000000 RSI: 00000000022e1d90 RDI: 0000000000000004
[ 227.500958] RBP: 0000000000000020 R08: 00007ffa59df3a60 R09: 0000000000000070
[ 227.500958] R10: 00000000022e1d90 R11: 0000000000000246 R12: 00000000022e1d90
[ 227.500959] R13: 00000000022e58e0 R14: 0000000000000043 R15: 00000000022e42c0

v2:
 (CI build)
  - Fix build error

Fixes: 1a52faed31311 ("drm/i915/guc: Take GT PM ref when deregistering context")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020192147.8048-1-matthew.brost@intel.com

drm/i915/selftests: Update live.evict to wait on requests / idle GPU after each loop

Update live.evict to wait on last request and idle GPU after each loop.
This not only enhances the test to fill the GGTT on each engine class
but also avoid timeouts from igt_flush_test when using GuC submission.
igt_flush_test (idle GPU) can take a long time with GuC submission if
losts of contexts are created due to H2G / G2H required to destroy
contexts.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021214040.33292-1-matthew.brost@intel.com

drm/i915/selftests: Increase timeout in requests perf selftest

perf_parallel_engines is micro benchmark to test i915 request
scheduling. The test creates a thread per physical engine and submits
NOP requests and waits the requests to complete in a loop. In execlists
mode this works perfectly fine as powerful CPU has enough cores to feed
each engine and process the CSBs. With GuC submission the uC gets
overwhelmed as all threads feed into a single CTB channel and the GuC
gets bombarded with CSBs as contexts are immediately switched in and out
on the engines due to the zero runtime of the requests. When the GuC is
overwhelmed scheduling of contexts is unfair due to the nature of the
GuC scheduling algorithm. This behavior is understood and deemed
acceptable as this micro benchmark isn't close to real world use case.
Increasing the timeout of wait period for requests to complete. This
makes the test understand that is ok for contexts to get starved in this
scenario.

A future patch / cleanup may just delete these micro benchmark tests as
they basically mean nothing. We care about real workloads not made up
ones.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211011175704.28509-1-matthew.brost@intel.com

drm/i915/ttm: enable shmem tt backend

Turn on the shmem tt backend, and enable shrinking.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018091055.1998191-8-matthew.auld@intel.com

drm/i915/ttm: use cached system pages when evicting lmem

This should let us do an accelerated copy directly to the shmem pages
when temporarily moving lmem-only objects, where the i915-gem shrinker
can later kick in to swap out the pages, if needed.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018091055.1998191-7-matthew.auld@intel.com

drm/i915/ttm: move shrinker management into adjust_lru

We currently just evict lmem objects to system memory when under memory
pressure. For this case we might lack the usual object mm.pages, which
effectively hides the pages from the i915-gem shrinker, until we
actually "attach" the TT to the object, or in the case of lmem-only
objects it just gets migrated back to lmem when touched again.

For all cases we can just adjust the i915 shrinker LRU each time we also
adjust the TTM LRU. The two cases we care about are:

  1) When something is moved by TTM, including when initially populating
     an object. Importantly this covers the case where TTM moves something from
     lmem <-> smem, outside of the normal get_pages() interface, which
     should still ensure the shmem pages underneath are reclaimable.

  2) When calling into i915_gem_object_unlock(). The unlock should
     ensure the object is removed from the shinker LRU, if it was indeed
     swapped out, or just purged, when the shrinker drops the object lock.

v2(Thomas):
  - Handle managing the shrinker LRU in adjust_lru, where it is always
    safe to touch the object.
v3(Thomas):
  - Pretty much a re-write. This time piggy back off the shrink_pin
    stuff, which actually seems to fit quite well for what we want here.
v4(Thomas):
  - Just use a simple boolean for tracking ttm_shrinkable.
v5:
  - Ensure we call adjust_lru when faulting the object, to ensure the
    pages are visible to the shrinker, if needed.
  - Add back the adjust_lru when in i915_ttm_move (Thomas)
v6(Reported-by: kernel test robot <lkp@intel.com>):
  - Remove unused i915_tt

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #v4
Link: https://patchwork.freedesktop.org/patch/msgid/20211018091055.1998191-6-matthew.auld@intel.com

drm/i915: add some kernel-doc for shrink_pin and friends

Attempt to document shrink_pin and the other relevant interfaces that
interact with it, before we start messing with it.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018091055.1998191-5-matthew.auld@intel.com

drm/i915: drop unneeded make_unshrinkable in free_object

The comment here is no longer accurate, since the current shrinker code
requires a full ref before touching any objects. Also unset_pages()
should already do the required make_unshrinkable() for us, if needed,
which is also nicely balanced with set_pages().

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018091055.1998191-4-matthew.auld@intel.com

drm/i915/gtt: drop unneeded make_unshrinkable

We already do this when mapping the pages.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018091055.1998191-3-matthew.auld@intel.com

drm/i915/ttm: add tt shmem backend

For cached objects we can allocate our pages directly in shmem. This
should make it possible(in a later patch) to utilise the existing
i915-gem shrinker code for such objects. For now this is still disabled.

v2(Thomas):
  - Add optional try_to_writeback hook for objects. Importantly we need
    to check if the object is even still shrinkable; in between us
    dropping the shrinker LRU lock and acquiring the object lock it could for
    example have been moved. Also we need to differentiate between
    "lazy" shrinking and the immediate writeback mode. Also later we need to
    handle objects which don't even have mm.pages, so bundling this into
    put_pages() would require somehow handling that edge case, hence
    just letting the ttm backend handle everything in try_to_writeback
    doesn't seem too bad.
v3(Thomas):
  - Likely a bad idea to touch the object from the unpopulate hook,
    since it's not possible to hold a reference, without also creating
    circular dependency, so likely this is too fragile. For now just
    ensure we at least mark the pages as dirty/accessed when called from the
    shrinker on WILLNEED objects.
  - s/try_to_writeback/shrinker_release_pages, since this can do more
    than just writeback.
  - Get rid of do_backup boolean and just set the SWAPPED flag prior to
    calling unpopulate.
  - Keep shmem_tt as lowest priority for the TTM LRU bo_swapout walk, since
    these just get skipped anyway. We can try to come up with something
    better later.
v4(Thomas):
  - s/PCI_DMA/DMA/. Also drop NO_KERNEL_MAPPING and NO_WARN, which
    apparently doesn't do anything with streaming mappings.
  - Just pass along the error for ->truncate, and assume nothing.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Oak Zeng <oak.zeng@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Oak Zeng <oak.zeng@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018091055.1998191-2-matthew.auld@intel.com

drm/i915/gem: Break out some shmem backend utils

Break out some shmem backend utils for future reuse by the TTM backend:
shmem_alloc_st(), shmem_free_st() and __shmem_writeback() which we can
use to provide a shmem-backed TTM page pool for cached-only TTM
buffer objects.

Main functional change here is that we now compute the page sizes using
the dma segments rather than using the physical page address segments.

v2(Reported-by: kernel test robot <lkp@intel.com>)
    - Make sure we initialise the mapping on the error path in
      shmem_get_pages()

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018091055.1998191-1-matthew.auld@intel.com

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in the new dma_resv iterators requested by
Maarten and Matt.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/dmabuf: fix broken build

wbinvd_on_all_cpus() is only defined on x86 it seems, plus we need to
include asm/smp.h here.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211021125332.2455288-1-matthew.auld@intel.com

Merge tag 'drm-intel-gt-next-2021-10-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

UAPI Changes:

- Expose multi-LRC submission interface

  Similar to the bonded submission interface but simplified.
  Comes with GuC only implementation for now. See kerneldoc
  for more details.

  Userspace changes: https://github.com/intel/media-driver/pull/1252

- Expose logical engine instance to user

  Needed by the multi-LRC submission interface for GuC

  Userspace changes: https://github.com/intel/media-driver/pull/1252

Driver Changes:

- Fix blank screen booting crashes when CONFIG_CC_OPTIMIZE_FOR_SIZE=y (Hugh)
- Add support for multi-LRC submission in the GuC backend (Matt B)
- Add extra cache flushing before making pages userspace visible (Matt A, Thomas)
- Mark internal GPU object pages dirty so they will be flushed properly (Matt A)

- Move remaining debugfs interfaces i915_wedged/i915_forcewake_user into gt (Andi)
- Replace the unconditional clflushes with drm_clflush_virt_range() (Ville)
- Remove IS_ACTIVE macro completely (Lucas)
- Improve kerneldocs for cache_dirty (Matt A)

- Add missing includes (Lucas)
- Selftest improvements (Matt R, Ran, Matt A)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YXFmLKoq8Fg9JxSd@jlahtine-mobl.ger.corp.intel.com

Merge tag 'drm-intel-next-2021-10-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

UAPI Changes:

- No Functional change, but a clarification around I915_TILING values (Matt).

Driver Changes:

- Changes around async flip VT-d w/a (Ville)
- Delete bogus NULL check in intel_ddi_encoder_destroy (Dan)
- DP link training improvements and DP per-lane driver settings (Ville)
- Free the returned object of acpi_evaluate_dsm (Zenghui)
- Fixes and improvements around DP's UHBR and MST (Jani)
- refactor plane config + pin out (Dave)
- remove unused include in intel_dsi_vbt.c (Lucas)
- some code clean up (Lucas, Jani)
- gracefully disable dual eDP (Jani)
- Remove memory frequency calculation (Jose)
- Fix oops on platforms w/o hpd support (Ville)
- Clean up PXP Kconfig info (Rodrigo)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YWnMORrixyw90O3/@intel.com

drm/i915/selftests: mark up hugepages object with start_cpu_write

Just like we do for internal objects. Also just use
i915_gem_object_set_cache_coherency() here. No need for over-flushing on
LLC platforms.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-9-matthew.auld@intel.com

drm/i915: mark up internal objects with start_cpu_write

While the pages can't be swapped out, they can be discarded by the shrinker.
Normally such objects are marked with __I915_MADV_PURGED, which can't be
unset, and therefore requires a new object. For kernel internal objects
this is not true, since the madv hint is reset for our special volatile
objects, such that we can re-acquire new pages, if so desired, without
needing a new object. As a result we should probably be paranoid here
and put the object back into the CPU domain when discarding the pages,
and also correctly set cache_dirty, if required.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-8-matthew.auld@intel.com

drm/i915: expand on the kernel-doc for cache_dirty

Add some details around non-LLC platforms and cflushing, when dealing
with the flush-on-acquire, which is potentially security sensitive.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-7-matthew.auld@intel.com

drm/i915/shmem: ensure flush during swap-in on non-LLC

On non-LLC platforms, force the flush-on-acquire if this is ever
swapped-in. Our async flush path is not trust worthy enough yet(and
happens in the wrong order), and with some tricks it's conceivable for
userspace to change the cache-level to I915_CACHE_NONE after the pages
are swapped-in, and since execbuf binds the object before doing the
async flush, there is a potential race window.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-6-matthew.auld@intel.com

drm/i915/userptr: add paranoid flush-on-acquire

Even though userptr objects are always coherent with the GPU, with no
way for userspace to change this with the set_caching ioctl, even on
non-LLC platforms, there is still the 'Bypass LCC' mocs setting, which
might permit reading the contents of main memory directly.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-5-matthew.auld@intel.com

drm/i915/dmabuf: add paranoid flush-on-acquire

As pointed out by Thomas, we likely need to flush the pages here if the
GPU can read the page contents directly from main memory. Underneath we
don't know what the sg_table is pointing to, so just add a
wbinvd_on_all_cpus() here, for now.

Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-4-matthew.auld@intel.com

drm/i915: extract bypass-llc check into helper

It looks like we will need this in some more places, so extract as a
helper.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-3-matthew.auld@intel.com

drm/i915: mark userptr objects as ALLOC_USER

These are userspace objects, so mark them as such. In a later patch it's
useful to determine how paranoid we need to be when managing cache
flushes. In theory no functional changes.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-2-matthew.auld@intel.com

drm/i915: mark dmabuf objects as ALLOC_USER

These are userspace objects, so mark them as such. In a later patch it's
useful to determine how paranoid we need to be when managing cache
flushes. In theory no functional changes.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211018174508.2137279-1-matthew.auld@intel.com

drm/i915/selftests: remove duplicate include in mock_region.c

'drm/ttm/ttm_placement.h' included in
'drivers/gpu/drm/i915/selftests/mock_region.c' is duplicated.
It is also included on the 9 line.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ran Jianping <ran.jianping@zte.com.cn>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019090205.1003458-1-ran.jianping@zte.com.cn

drm/i915: Catch yet another unconditioal clflush

Replace the unconditional clflush() with drm_clflush_virt_range()
which does the wbinvd() fallback when clflush is not available.

This time no justification is given for the clflush in the
offending commit.

Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 2c8ab3339e39 ("drm/i915: Pin timeline map after first timeline pin, v4.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-4-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/i915: Convert unconditional clflush to drm_clflush_virt_range()

This one is apparently a "clflush for good measure", so bit more
justification (if you can call it that) than some of the others.
Convert to drm_clflush_virt_range() again so that machines without
clflush will survive the ordeal.

Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com> #v1
Fixes: 12ca695d2c1e ("drm/i915: Do not share hwsp across contexts any more, v8.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-3-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/i915: Replace the unconditional clflush with drm_clflush_virt_range()

Not all machines have clflush, so don't go assuming they do.
Not really sure why the clflush is even here since hwsp
is supposed to get snooped I thought.

Although in my case we're talking about a i830 machine where
render/blitter snooping is definitely busted. But it might
work for the hswp perhaps. Haven't really reverse engineered
that one fully.

Cc: stable@vger.kernel.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: b436a5f8b6c8 ("drm/i915/gt: Track all timelines created using the HWSP")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-2-ville.syrjala@linux.intel.com
Reviewed-by: Dave Airlie <airlied@redhat.com>

drm/i915: Clean up PXP Kconfig info.

During the review I focused on stop the using of the "+"
to reference the newer platforms, but I forgot that we are
in a process of making things more clear and differentiate
graphics and display versions. So, let me to clean up this
a bit. Also, we don't need any version mentioned in the
config menu entry, only in the help.

Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211015090916.82968-1-rodrigo.vivi@intel.com

drm/i915: Enable multi-bb execbuf

Enable multi-bb execbuf by enabling the set_parallel extension.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-25-matthew.brost@intel.com

drm/i915: Update I915_GEM_BUSY IOCTL to understand composite fences

Parallel submission create composite fences (dma_fence_array) for excl /
shared slots in objects. The I915_GEM_BUSY IOCTL checks these slots to
determine the busyness of the object. Prior to patch it only check if
the fence in the slot was a i915_request. Update the check to understand
composite fences and correctly report the busyness.

v2:
 (Tvrtko)
  - Remove duplicate BUILD_BUG_ON

Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-24-matthew.brost@intel.com

drm/i915: Make request conflict tracking understand parallel submits

If an object in the excl or shared slot is a composite fence from a
parallel submit and the current request in the conflict tracking is from
the same parallel context there is no need to enforce ordering as the
ordering is already implicit. Make the request conflict tracking
understand this by comparing a parallel submit's parent context and
skipping conflict insertion if the values match.

v2:
 (John Harrison)
  - Reword commit message

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-23-matthew.brost@intel.com

drm/i915/guc: Handle errors in multi-lrc requests

If an error occurs in the front end when multi-lrc requests are getting
generated we need to skip these in the backend but we still need to
emit the breadcrumbs seqno. An issues arises because with multi-lrc
breadcrumbs there is a handshake between the parent and children to make
forward progress. If all the requests are not present this handshake
doesn't work. To work around this, if multi-lrc request has an error we
skip the handshake but still emit the breadcrumbs seqno.

v2:
 (John Harrison)
  - Add comment explaining the skipping of the handshake logic
  - Fix typos in the commit message
v3:
 (John Harrison)
  - Fix up some comments about the math to NOP the ring

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-22-matthew.brost@intel.com

drm/i915: Multi-BB execbuf

Allow multiple batch buffers to be submitted in a single execbuf IOCTL
after a context has been configured with the 'set_parallel' extension.
The number batches is implicit based on the contexts configuration.

This is implemented with a series of loops. First a loop is used to find
all the batches, a loop to pin all the HW contexts, a loop to create all
the requests, a loop to submit (emit BB start, etc...) all the requests,
a loop to tie the requests to the VMAs they touch, and finally a loop to
commit the requests to the backend.

A composite fence is also created for the generated requests to return
to the user and to stick in dma resv slots.

No behavior from the existing IOCTL should be changed aside from when
throttling because the ring for a context is full. In this situation,
i915 will now wait while holding the object locks. This change was done
because the code is much simpler to wait while holding the locks and we
believe there isn't a huge benefit of dropping these locks. If this
proves false we can restructure the code to drop the locks during the
wait.

IGT: https://patchwork.freedesktop.org/patch/447008/?series=93071&rev=1
media UMD: https://github.com/intel/media-driver/pull/1252

v2:
 (Matthew Brost)
  - Return proper error value if i915_request_create fails
v3:
 (John Harrison)
  - Add comment explaining create / add order loops + locking
  - Update commit message explaining different in IOCTL behavior
  - Line wrap some comments
  - eb_add_request returns void
  - Return -EINVAL rather triggering BUG_ON if cmd parser used
 (Checkpatch)
  - Check eb->batch_len[*current_batch]
v4:
 (CI)
  - Set batch len if passed if via execbuf args
  - Call __i915_request_skip after __i915_request_commit
 (Kernel test robot)
  - Initialize rq to NULL in eb_pin_timeline
v5:
 (John Harrison)
  - Fix typo in comments near bb order loops

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-21-matthew.brost@intel.com

drm/i915/guc: Implement no mid batch preemption for multi-lrc

For some users of multi-lrc, e.g. split frame, it isn't safe to preempt
mid BB. To safely enable preemption at the BB boundary, a handshake
between parent and child is needed, syncing the set of BBs at the
beginning and end of each batch. This is implemented via custom
emit_bb_start & emit_fini_breadcrumb functions and enabled by default if
a context is configured by set parallel extension.

Lastly, this patch updates the process descriptor to the correct size as
the memory used in the handshake is directly after the process
descriptor.

v2:
 (John Harrison)
  - Fix a few comments wording
  - Add struture for parent page layout
v3:
 (John Harrison)
  - A structure for sync semaphore
  - Use offsetof to calc address
  - Update commit message
v4:
 (John Harrison)
  - Fix typos in comment explaining memory map of scratch page

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-20-matthew.brost@intel.com

drm/i915/guc: Add basic GuC multi-lrc selftest

Add very basic (single submission) multi-lrc selftest.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-19-matthew.brost@intel.com

drm/i915/doc: Update parallel submit doc to point to i915_drm.h

Update parallel submit doc to point to i915_drm.h

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-18-matthew.brost@intel.com

drm/i915/guc: Connect UAPI to GuC multi-lrc interface

Introduce 'set parallel submit' extension to connect UAPI to GuC
multi-lrc interface. Kernel doc in new uAPI should explain it all.

IGT: https://patchwork.freedesktop.org/patch/447008/?series=93071&rev=1
media UMD: https://github.com/intel/media-driver/pull/1252

v2:
 (Daniel Vetter)
  - Add IGT link and placeholder for media UMD link
v3:
 (Kernel test robot)
  - Fix warning in unpin engines call
 (John Harrison)
  - Reword a bunch of the kernel doc
v4:
 (John Harrison)
  - Add comment why perma-pin is done after setting gem context
  - Update some comments / docs for proto contexts
v5:
 (John Harrison)
  - Rework perma-pin comment
  - Add BUG_IN if context is pinned when setting gem context

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-17-matthew.brost@intel.com

drm/i915/guc: Update debugfs for GuC multi-lrc

Display the workqueue status in debugfs for GuC contexts that are in
parent-child relationship.

v2:
 (John Harrison)
  - Output number children in debugfs

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-16-matthew.brost@intel.com

drm/i915/guc: Implement multi-lrc reset

Update context and full GPU reset to work with multi-lrc. The idea is
parent context tracks all the active requests inflight for itself and
its children. The parent context owns the reset replaying / canceling
requests as needed.

v2:
 (John Harrison)
  - Simply loop in find active request
  - Add comments to find ative request / reset loop
v3:
 (John Harrison)
  - s/its'/its/g
  - Fix comment when searching for active request
  - Reorder if state in __guc_reset_context
v4:
 (Kernel test robot)
  - Delete unused is_multi_lrc function

Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-15-matthew.brost@intel.com

drm/i915/guc: Insert submit fences between requests in parent-child relationship

The GuC must receive requests in the order submitted for contexts in a
parent-child relationship to function correctly. To ensure this, insert
a submit fence between the current request and last request submitted
for requests / contexts in a parent child relationship. This is
conceptually similar to a single timeline.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-14-matthew.brost@intel.com

drm/i915/guc: Implement multi-lrc submission

Implement multi-lrc submission via a single workqueue entry and single
H2G. The workqueue entry contains an updated tail value for each
request, of all the contexts in the multi-lrc submission, and updates
these values simultaneously. As such, the tasklet and bypass path have
been updated to coalesce requests into a single submission.

v2:
 (John Harrison)
  - s/wqe/wqi
  - Use FIELD_PREP macros
  - Add GEM_BUG_ONs ensures length fits within field
  - Add comment / white space to intel_guc_write_barrier
 (Kernel test robot)
  - Make need_tasklet a static function
v3:
 (Docs)
  - A comment for submission_stall_reason
v4:
 (Kernel test robot)
  - Initialize return value in bypass tasklt submit function
 (John Harrison)
  - Add comment near work queue defs
  - Add BUILD_BUG_ON to ensure WQ_SIZE is a power of 2
  - Update write_barrier comment to talk about work queue
v5:
 (John Harrison)
  - Fix typo in work queue comment

Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-13-matthew.brost@intel.com

drm/i915/guc: Implement parallel context pin / unpin functions

Parallel contexts are perma-pinned by the upper layers which makes the
backend implementation rather simple. The parent pins the guc_id and
children increment the parent's pin count on pin to ensure all the
contexts are unpinned before we disable scheduling with the GuC / or
deregister the context.

v2:
 (Daniel Vetter)
  - Perma-pin parallel contexts

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-12-matthew.brost@intel.com

drm/i915/guc: Assign contexts in parent-child relationship consecutive guc_ids

Assign contexts in parent-child relationship consecutive guc_ids. This
is accomplished by partitioning guc_id space between ones that need to
be consecutive (1/16 available guc_ids) and ones that do not (15/16 of
available guc_ids). The consecutive search is implemented via the bitmap
API.

This is a precursor to the full GuC multi-lrc implementation but aligns
to how GuC mutli-lrc interface is defined - guc_ids must be consecutive
when using the GuC multi-lrc interface.

v2:
 (Daniel Vetter)
  - Explicitly state why we assign consecutive guc_ids
v3:
 (John Harrison)
  - Bring back in spin lock

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-11-matthew.brost@intel.com

drm/i915/guc: Ensure GuC schedule operations do not operate on child contexts

In GuC parent-child contexts the parent context controls the scheduling,
ensure only the parent does the scheduling operations.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-10-matthew.brost@intel.com

drm/i915/guc: Add multi-lrc context registration

Add multi-lrc context registration H2G. In addition a workqueue and
process descriptor are setup during multi-lrc context registration as
these data structures are needed for multi-lrc submission.

v2:
 (John Harrison)
  - Move GuC specific fields into sub-struct
  - Clean up WQ defines
  - Add comment explaining math to derive WQ / PD address
v3:
 (John Harrison)
  - Add PARENT_SCRATCH_SIZE define
  - Update comment explaining multi-lrc register
v4:
 (John Harrison)
  - Move PARENT_SCRATCH_SIZE to common file

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-9-matthew.brost@intel.com

drm/i915/guc: Introduce context parent-child relationship

Introduce context parent-child relationship. Once this relationship is
created all pinning / unpinning operations are directed to the parent
context. The parent context is responsible for pinning all of its
children and itself.

This is a precursor to the full GuC multi-lrc implementation but aligns
to how GuC mutli-lrc interface is defined - a single H2G is used
register / deregister all of the contexts simultaneously.

Subsequent patches in the series will implement the pinning / unpinning
operations for parent / child contexts.

v2:
 (Daniel Vetter)
  - Add kernel doc, add wrapper to access parent to ensure safety
v3:
 (John Harrison)
  - Fix comment explaing GEM_BUG_ON in to_parent()
  - Make variable names generic (non-GuC specific)
v4:
 (John Harrison)
  - s/its'/its/g

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-8-matthew.brost@intel.com

drm/i915: Expose logical engine instance to user

Expose logical engine instance to user via query engine info IOCTL. This
is required for split-frame workloads as these needs to be placed on
engines in a logically contiguous order. The logical mapping can change
based on fusing. Rather than having user have knowledge of the fusing we
simply just expose the logical mapping with the existing query engine
info IOCTL.

IGT: https://patchwork.freedesktop.org/patch/445637/?series=92854&rev=1
media UMD: https://github.com/intel/media-driver/pull/1252

v2:
 (Daniel Vetter)
  - Add IGT link, placeholder for media UMD

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-7-matthew.brost@intel.com

drm/i915: Add logical engine mapping

Add logical engine mapping. This is required for split-frame, as
workloads need to be placed on engines in a logically contiguous manner.

v2:
 (Daniel Vetter)
  - Add kernel doc for new fields
v3:
 (Tvrtko)
  - Update comment for new logical_mask field
v4:
 (John Harrison)
  - Update comment for new logical_mask field

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-6-matthew.brost@intel.com

drm/i915/guc: Don't call switch_to_kernel_context with GuC submission

Calling switch_to_kernel_context isn't needed if the engine PM reference
is taken while all user contexts are pinned as if don't have PM ref that
guarantees that all user contexts scheduling is disabled. By not calling
switch_to_kernel_context we save on issuing a request to the engine.

v2:
 (Daniel Vetter)
  - Add FIXME comment about pushing switch_to_kernel_context to backend
v3:
 (John Harrison)
  - Update commit message
  - Fix workding comment

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-5-matthew.brost@intel.com

drm/i915/guc: Take engine PM when a context is pinned with GuC submission

Taking a PM reference to prevent intel_gt_wait_for_idle from short
circuiting while any user context has scheduling enabled. Returning GT
idle when it is not can cause all sorts of issues throughout the stack.

v2:
 (Daniel Vetter)
  - Add might_lock annotations to pin / unpin function
v3:
 (CI)
  - Drop intel_engine_pm_might_put from unpin path as an async put is
    used
v4:
 (John Harrison)
  - Make intel_engine_pm_might_get/put work with GuC virtual engines
  - Update commit message
v5:
  - Update commit message again

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-4-matthew.brost@intel.com

drm/i915/guc: Take GT PM ref when deregistering context

Taking a PM reference to prevent intel_gt_wait_for_idle from short
circuiting while a deregister context H2G is in flight. To do this must
issue the deregister H2G from a worker as context can be destroyed from
an atomic context and taking GT PM ref blows up. Previously we took a
runtime PM from this atomic context which worked but will stop working
once runtime pm autosuspend in enabled.

So this patch is two fold, stop intel_gt_wait_for_idle from short
circuting and fix runtime pm autosuspend.

v2:
 (John Harrison)
  - Split structure changes out in different patch
 (Tvrtko)
  - Don't drop lock in deregister_destroyed_contexts
v3:
 (John Harrison)
  - Flush destroyed contexts before destroying context reg pool

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-3-matthew.brost@intel.com

drm/i915/guc: Move GuC guc_id allocation under submission state sub-struct

Move guc_id allocation under submission state sub-struct as a future
patch will reuse the spin lock as a global submission state lock. Moving
this into sub-struct makes ownership of fields / lock clear.

v2:
 (Docs)
  - Add comment for submission_state sub-structure
v3:
 (John Harrison)
  - Fixup a few comments
v4:
 (John Harrison)
  - Fix typo

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014172005.27155-2-matthew.brost@intel.com

drm/i915/gt: move remaining debugfs interfaces into gt

The following interfaces:

  i915_wedged
  i915_forcewake_user

are dependent on gt values. Put them inside gt/ and drop the
"i915_" prefix name. This would be the new structure:

  dri/0/gt
  |
  +-- forcewake_user
  |
  \-- reset

For backwards compatibility with existing igt (and the slight
semantic difference between operating on the i915 abi entry
points and the deep gt info):

  dri/0
  |
  +-- i915_wedged
  |
  \-- i915_forcewake_user

remain at the top level.

Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012221738.16029-1-andi@etezian.org

drm/i915: fix blank screen booting crashes

5.15-rc1 crashes with blank screen when booting up on two ThinkPads
using i915.  Bisections converge convincingly, but arrive at different
and surprising "culprits", none of them the actual culprit.

netconsole (with init_netconsole() hacked to call i915_init() when
logging has started, instead of by module_init()) tells the story:

kernel BUG at drivers/gpu/drm/i915/i915_sw_fence.c:245!
with RSI: ffffffff814d408b pointing to sw_fence_dummy_notify().
I've been building with CONFIG_CC_OPTIMIZE_FOR_SIZE=y, and that
function needs to be 4-byte aligned.

v2:
 (Jani Nikula)
  - Change BUG_ON to WARN_ON
v3:
 (Jani / Tvrtko)
  - Short circuit __i915_sw_fence_init on WARN_ON
v4:
 (Lucas)
  - Break WARN_ON changes out in a different patch

Fixes: 62eaf0ae217d ("drm/i915/guc: Support request cancellation")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922015039.26411-1-matthew.brost@intel.com

drm/i915/uapi: Add comment clarifying purpose of I915_TILING_* values

The I915_TILING_* values in our uapi header are intended solely for use
with the old get_tiling/set_tiling ioctls that operate on hardware
de-tiling fences; all other uapi communication about tiling types is
done via framebuffer modifiers rather than with these old values.

On newer Intel platforms detiling fences no longer exist so the old
get_tiling/set_tiling ioctls are no longer usable and will always return
-EOPNOTSUPP.  This means there's no reason to add new tiling types (such
as the Tile4 format introduced by Xe_HP) to the uapi header here.  Any
kernel-internal code that needs to represent tiling format should either
rely on framebuffer modifiers (as the display code does) or use some
kind of non-uapi enum (as the GEM blt selftest now does).

References: https://patchwork.freedesktop.org/patch/456656/?series=95308
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Caz Yokoyama <caz.yokoyama@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012221245.2609670-1-matthew.d.roper@intel.com

drm/i915: Fix oops on platforms w/o hpd support

We don't have hpd support on i8xx/i915 which means hotplug_funcs==NULL.
Let's not oops when loading the driver on one those machines.

v2: Drop the redundant function pointer check (Jani)

Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Fixes: cd030c7c11a4 ("drm/i915: constify hotplug function vtable.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014090941.12159-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Remove memory frequency calculation

This memory frequency calculated is only used to check if it is zero,
what is not useful as it will never actually be zero.

Also the calculation is wrong, we should be checking other bit to
select the appropriate frequency multiplier while this code is stuck
with a fixed multiplier.

So here dropping it as whole.

v2:
- Also remove memory frequency calculation for gen9 LP platforms

Cc: Yakui Zhao <yakui.zhao@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 5d0c938ec9cc ("drm/i915/gen11+: Only load DRAM information from pcode")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013010046.91858-1-jose.souza@intel.com

drm/i915: Add all per-lane register definitions for icl combo phy

Add the FOO_LN() register macros for all the icl combo phy registers.
Also get rid of the semi-pointless FOO_LN0() variants and just use
the parametrized version.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Extract icl_combo_phy_loadgen_select()

Pull the convoluted loadgen calculation into a small helper.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Remove dead DKL_TX_LOADGEN_SHARING_PMD_DISABLE stuff

DKL_TX_LOADGEN_SHARING_PMD_DISABLE doesn't even seem to exist,
also the spec says to skip all loadgen stuff.

The code was dead anyway since it wasn't actually writing the value
anywhere.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Use standard form terminating condition for lane for loops

Use <4 instead of <=3 as the terminating condition for the
loops over the 4 lanes.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Shrink {icl_mg,tgl_dkl}_phy_ddi_buf_trans

All the values we have in {icl_mg,tgl_dkl}_phy_ddi_buf_trans
fit into u8. Shrink the types accordingly.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Remove pointless extra namespace from dkl/snps buf trans structs

The struct itself already has sufficient namespace. No need to
duplicate it in the members.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: rename intel_sideband.[ch] to intel_sbi.[ch]

Now that intel_sideband.[ch] has been decluttered, it's pure lpt/wpt
iosf sideband. Let's call it intel_sbi, following the function naming.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/183423ff23b2d259e4a197e74daf6bcd750bfe14.1634207064.git.jani.nikula@intel.com

drm/i915: split out intel_pcode.[ch] to separate file

The snb+ pcode mailbox code is not sideband, so split it out to a
separate file. As can be seen from the #include changes, very few places
use both sideband and pcode.

Code movement only.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/185deb18eb739e5ae019e27834b9997dcc1347bc.1634207064.git.jani.nikula@intel.com

drm/i915/bios: gracefully disable dual eDP for now

For the time being, neither the power sequencer nor the backlight code
properly support two eDP panels simultaneously. While the software
states will be independent, the same sets of registers will be used for
both eDP panels, clobbering the hardware state and leading to errors.

Gracefully disable dual eDP until proper support has been added.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211005175636.24669-1-jani.nikula@intel.com

drm/i915: split out vlv sideband to a separate file

The VLV/CHV sideband code is pretty distinct from the rest of the
sideband code. Split it out to new vlv_sideband.[ch].

Pure code movement with relevant #include changes, and a tiny checkpatch
fix on top.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/755ebbbaf01fc6d306b763b6ef60f45e671ba290.1634119597.git.jani.nikula@intel.com

drm/i915: Stop using I915_TILING_* in client blit selftest

The I915_TILING_* definitions in the uapi header are intended solely for
tiling modes that are visible to the old de-tiling fence ioctls.  Since
modern hardware does not support de-tiling fences, we should not add new
definitions for new tiling types going forward.  However we do want the
client blit selftest to eventually cover other new tiling modes (such as
Tile4), so switch it to using its own enum of tiling modes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211001005816.73330-1-matthew.d.roper@intel.com

drm/i915/display: remove unused intel-mid.h include

Nothing from intel-mid.h and this is only available on x86, so remove it
as we prepare support for other architectures.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007233212.3896460-4-lucas.demarchi@intel.com

Merge drm/drm-next into drm-intel-next

Need to resync drm-intel-next with TTM and PXP stuff from
drm-intel-gt-next that is now in drm/drm-next.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/gt: add asm/cacheflush.h for use of clflush()

Let's include what we use instead of relying on other indirect includes.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007233212.3896460-3-lucas.demarchi@intel.com

drm/i915/gt: include tsc.h where used

We are currently using tsc_khz as a fallback so add the right include.
For other architectures we may need to add a different fallback, but
this is not being used by dgfx so we may as well just paper it over.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007233212.3896460-2-lucas.demarchi@intel.com

drm/i915/display: move pin/unpin fb/plane code to a new file.

This just moves this code out of the i915_display.c into a new
standalone file.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012043502.1377715-6-airlied@gmail.com