coresight: tpiu: Prepare for using coresight device access abstraction

Prepare the TPIU driver to make use of the CoreSight device access
abstraction layer. The driver touches the device even before the
coresight device is registered. Thus we could be accessing the
devices without a csdev. As we are about to use the abstraction
layer for accessing the device, pass in the access directly
to avoid having to deal with the un-initialised csdev.

Link: https://lore.kernel.org/r/20210110224850.1880240-5-suzuki.poulose@arm.com
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-7-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: Introduce device access abstraction

We are about to introduce support for sysreg access to ETMv4.4+
component. Since there are generic routines that access the
registers (e.g, CS_LOCK/UNLOCK , claim/disclaim operations, timeout)
and in order to preserve the logic of these operations at a
single place we introduce an abstraction layer for the accesses
to a given device.

Link: https://lore.kernel.org/r/20210110224850.1880240-4-suzuki.poulose@arm.com
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-6-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: etm4x: Skip accessing TRCPDCR in save/restore

When the ETM is affected by Qualcomm errata, modifying the
TRCPDCR could cause the system hang. Even though this is
taken care of during enable/disable ETM, the ETM state
save/restore could still access the TRCPDCR. Make sure
we skip the access during the save/restore.

Found by code inspection.

Link: https://lore.kernel.org/r/20210110224850.1880240-3-suzuki.poulose@arm.com
Fixes: 02510a5aa78d ("coresight: etm4x: Add support to skip trace unit power up")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: Tingwei Zhang <tingwei@codeaurora.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-5-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: etm4x: Handle access to TRCSSPCICRn

TRCSSPCICR<n> is present only if all of the following are true:
TRCIDR4.NUMSSCC > n.
TRCIDR4.NUMPC > 0b0000 .
TRCSSCSR<n>.PC == 0b1

Add a helper function to check all the conditions.

Link: https://lore.kernel.org/r/20210110224850.1880240-2-suzuki.poulose@arm.com
Cc: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-4-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: etm4x: add AMBA id for Cortex-A55 and Cortex-A75

Add AMBA UCI id to support Cortex-A55(Ananke) and Cortex-A75(Promethus).

Reviewed by: Mike Leach <mike.leach@linaro.org>

Link: https://lore.kernel.org/r/20210118065549.197489-1-zhang.lyra@gmail.com
Signed-off-by: Bin Ji <bin.ji@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: cti: Reduce scope for the variable 'cs_fwnode' in cti_plat_create_connection()

A local variable was used only within an else branch.
Thus move the definition for the variable “cs_fwnode” into
the corresponding code block.

This issue was detected by using the Coccinelle software.

Link: https://lore.kernel.org/r/c1b09b27-9012-324f-28d0-ba820dc468a5@web.de
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210201181351.1475223-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: fix the RNDRESEEDCRNG ioctl

The RNDRESEEDCRNG ioctl reseeds the primary_crng from itself, which
doesn't make sense.  Reseed it from the input_pool instead.

Fixes: d848e5f8e1eb ("random: add new ioctl RNDRESEEDCRNG")
Cc: stable@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210112192818.69921-1-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: pvpanic: sysfs_emit uses should have a newline

Add newline terminations to the sysfs_emit uses added by -next
commit 8d6da6575ffe ("misc: pvpanic: introduce events device attribue")

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Link: https://lore.kernel.org/r/13b1c892d52c27d4caeccc89506aadda74f61365.camel@perches.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'misc-habanalabs-next-2021-01-27' of https://git./linux/kernel/git/ogabbay/linux into char-misc-next

Oded writes:

This tag contains habanalabs driver changes for v5.12:

- Add feature called "staged command submissions". In this feature,
  the driver allows the user to submit multiple command submissions
  that describe a single pass on the deep learning graph. The driver
  tracks the completion of the entire pass by the last stage CS.

- Update code to support the latest firmware image

- Optimizations and improvements to MMU code:
  - Support page size that is not power-of-2
  - Make the locks scheme simpler
  - mmap areas in device configuration space to userspace

- Security fixes:
  - Make ETR non-secured
  - Remove access to kernel memory through debug-fs interface
  - Remove access through PCI bar to SyncManager register block
    in Gaudi

- Many small bug fixes

* tag 'misc-habanalabs-next-2021-01-27' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (41 commits)
  habanalabs: update to latest hl_boot_if.h spec from F/W
  habanalabs/gaudi: unmask HBM interrupts after handling
  habanalabs: update SyncManager interrupt handling
  habanalabs: fix ETR security issue
  habanalabs: staged submission support
  habanalabs: modify device_idle interface
  habanalabs: add CS completion and timeout properties
  habanalabs: add new mem ioctl op for mapping hw blocks
  habanalabs: fix MMU debugfs related nodes
  habanalabs: add user available interrupt to hw_ip
  habanalabs: always try to use the hint address
  CREDITS: update email address and home address
  habanalabs: update email address in sysfs/debugfs docs
  habanalabs: add security violations dump to debugfs
  habanalabs: ignore F/W BMC errors in case no BMC present
  habanalabs/gaudi: print sync manager SEI interrupt info
  habanalabs: Use 'dma_set_mask_and_coherent()'
  habanalabs/gaudi: remove PCI access to SM block
  habanalabs: add driver support for internal cb scheduling
  habanalabs: increment ctx ref from within a cs allocation
  ...

misc: bcm-vk: only support ttyVK if CONFIG_TTY is set

Correct compile issue if CONFIG_TTY is not set by
only adding ttyVK devices if CONFIG_BCM_VK_TTY is set.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210203223826.21674-1-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: bcm-vk: Fix a couple error codes in probe()

These errors should return negative error codes instead of returning
success.

Fixes: 064ffc7c3939 ("misc: bcm-vk: add autoload support")
Fixes: 522f692686a7 ("misc: bcm-vk: add Broadcom VK driver")
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YBpyEbmz00rjvT9S@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: rtsx: Remove unneeded return variable

This patch removes unneeded return variables, using only
'0' instead.
It fixes the following warning detected by coccinelle:
./drivers/misc/cardreader/rtsx_pcr.c:1808:5-8: Unneeded variable: "ret".
Return "0" on line 1833.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1612164640-84541-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: bcm-vk: unlock on error in bcm_to_h_msg_dequeue()

Unlock before returning on this error path.

Fixes: 111d746bb476 ("misc: bcm-vk: add VK messaging support")
Acked-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YBfyb+jU5lDUe+5g@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: add adler lake point LP DID

Add Adler Lake LP device id.

Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210129120752.850325-7-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: add adler lake point S DID

Add Adler Lake S device id.

Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210129120752.850325-6-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: emmitsburg workstation DID

Add Emmitsburg workstation DID.

Cc: <stable@vger.kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210129120752.850325-5-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: hbm: drop hbm responses on shutdown

Ignore and drop HBM responses from init phase in shutdown phase.
Fixes stall if driver starting to stop in the middle of link init.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210129120752.850325-4-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: hbm: call mei_set_devstate() on hbm stop response

Use mei_set_devstate() wrapper upon hbm stop command response,
to trigger sysfs event.

Fixes: 43b8a7ed4739 ("mei: expose device state in sysfs")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210129120752.850325-3-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: document that mei_msg_hdr_init returns ERR_PTR

Document that mei_msg_hdr_init returns ERR_PTR.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210129120752.850325-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: fix transfer over dma with extended header

The size in header field for packet transferred over DMA
includes size of the extended header.
Include extended header in size check.
Add size and sanity checks on extended header.

Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210129120752.850325-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: bcm-vk: fix set_q_num API precedence issue

Change set_q_num API to use if-else to make it more explicit,
and avoid a precedence rule issue.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210129060403.14801-1-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: pti: Remove a leftover in documentation

Driver is gone, so is the documentation. Remove a leftover in documentation.

Fixes: 8ba59e9dee31 ("misc: pti: Remove driver for deprecated platform")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210129112729.65363-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

habanalabs: update to latest hl_boot_if.h spec from F/W

It adds the definition for indication that the F/W handles HBM ECC
events.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs/gaudi: unmask HBM interrupts after handling

As the driver does with all interrupts, we need to tell F/W to unmask
the HBM interrupts after the driver handled them.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: update SyncManager interrupt handling

The firmware provides more information about SyncManager events.
Adjust the code to the latest firmware interface file.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: fix ETR security issue

ETR should always be non-secured as it is used by the users to record
profiling/trace data.
This patch fixes the configuration to match those requirements.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: staged submission support

We introduce a new mechanism named Staged Submission.
This mechanism allows the user to send a whole CS in pieces.
Each CS will not require completion rather than the
last CS. Timeout timer will be triggered upon reception of the first
CS in group.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: modify device_idle interface

Currently this API uses single 64 bits mask for engines idle indication.
Recently, it was observed that more bits are needed for some ASICs.
This patch modifies the use of the idle mask and the idle_extensions
mask.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: add CS completion and timeout properties

In order to support staged submission feature, we need to
distinguish on which command submission we want to receive
timeout and for which we want to receive completion.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: add new mem ioctl op for mapping hw blocks

For future ASIC support the driver allows user to map certain regions
in the device's configuration space for direct access from userspace.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: fix MMU debugfs related nodes

In mmu debugfs node show un-scrambled physical addresses.
before read/write through data nodes, need to unscramble the
physical address before using it for pci transaction.

Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: add user available interrupt to hw_ip

In order to support completions that arrive directly to the user,
the driver needs to supply the user with the first available msix
interrupt available.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: always try to use the hint address

Currently hint address is ignored in case va block page size
is not power of 2. We need to support th user hint address also in this
case, but only if the hint address is aligned to page size.

Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

CREDITS: update email address and home address

Update my email address to kernel.org account and my home address
to my new house.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: update email address in sysfs/debugfs docs

Use my kernel.org address for contact point instead of my private email
address.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: add security violations dump to debugfs

In order to improve driver security debuggability, we add
security violations dump to debugfs.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: ignore F/W BMC errors in case no BMC present

In order to support operation mode in which BMC is not active,
driver must not take BMC errors into consideration.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs/gaudi: print sync manager SEI interrupt info

Driver must print sync manager SEI information upon receiving
interrupt from FW.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: Use 'dma_set_mask_and_coherent()'

Axe 'hl_pci_set_dma_mask()' and replace it with an equivalent
'dma_set_mask_and_coherent()' call.

This makes the code a bit less verbose.

It also removes an erroneous comment, because 'hl_pci_set_dma_mask()'
does not try to use a fall-back value.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs/gaudi: remove PCI access to SM block

Due to HW limitation we must remove all direct access to SM
registers, in order to do that we will access SM registers using
the HW QMANS.
When possible and no user context is present, we can directly access
the HW QMANS. Whenever there is an active user, driver will
prepare a pending command buffer list which will be sent upon
user submissions.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: add driver support for internal cb scheduling

In order to support scnenarios in which driver needs access to
HW components but it cannot access them directly, we add support for
scheduling command buffers internally.
These command buffers will be transmitted upon next user command
submission context.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: increment ctx ref from within a cs allocation

A CS must increment the relevant context reference count.
We want to increment the reference inside the CS allocation function
as opposed for today where we increment it outside.
This is logical since we want to avoid explicitly incrementing
the context every time we call the CS allocate function.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: separate common code to dedicated folders

We separate some of the common code source files to different
folders for a better maintainability and testability.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: read device boot errors after cpucp is up

Boot cpu can report errors in various boot stages.
Current implementaion does not take into consideration errors
reported in late stages, hence we will check for errors at the most
late stage when fetching cpucp information.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: report correct dram size in info ioctl

In case MMU is enabled, we must take MMU page size into
consideration when reporting dram size to the user.
This is because the MMU page size can be a value which is NOT
a power-of-2 value. As a result, the total DRAM size (which is always
a power-of-2 value) needed to be rounded-down.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: support non power-of-2 DRAM phys page sizes

DRAM physical page sizes depend of the amount of HBMs available in
the device. this number is device-dependent and may also be subject
to binning when one or more of the DRAM controllers are found to
to be faulty. Such a configuration may lead to partitioning the DRAM
to non-power-of-2 pages.

To support this feature we also need to add infrastructure of address
scarmbling.

Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: remove access to kernel memory using debugfs

Accessing kernel allocated memory through debugfs should not
be allowed as it introduces a security vulnerability.
We remove the option to read/write kernel memory for all asics.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs/gaudi: set uninitialized symbol

Initialize local variable that is returned by the function, in
case it is never assigned.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: return dram virtual address in info ioctl

When working with DRAM MMU, we should supply the userspace with the
virtual start address of the DRAM instead of the physical one. This
is because the physical one has no meaning for the user as he only
knows the virtual address range.

Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: update to latest hl_boot_if.h

Update the latest version of this file that the F/W exports

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: add ASIC property of functional HBMs

The number of functional HBMs in the same ASIC can be different due
to malfunctioning HBM banks.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs/gaudi: add debug prints for security status

In order to have more information while debugging boot issues,
we should print the firmware security status at every boot stage.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: modify memory functions signatures

For consistency, modify all memory ioctl functions to get the ioctl
arguments structure rather than the arguments themselves.

Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: kernel doc format in memory functions

Change all memory functions documentation according to kernel doc
format.

Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: replace WARN/WARN_ON with dev_crit in driver

Often WARN is defined in data-centers as BUG and we would like to
avoid hanging the entire server on some internal error of the driver
(important as it might be).

Therefore, use dev_crit instead.

Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: report dram_page_size in hw_ip_info ioctl

Instead of having it hard-coded as a define, pass it to the user
in runtime.

Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs/goya: move mmu_prepare to context init

Currently mmu_prepare is located at context switch.
Since we support a single context, no reason to reconfigure
the MMU registers every context switch.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs/gaudi: remove duplicated gaudi packets masks

As all packets use the same CTL register masks, we remove duplicated
masks and use common masks instead.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: allow user to pass a staged submission seq

In order to support the staged submission feature, user must be
allowed to use the same CS sequence for all submissions in the
same staged submission.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs/gaudi: support CS with no completion

As part of the staged submission feature, we need Gaudi to support
command submissions that will never get a completion.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: Init the VM module for kernel context

In order for reserving VA ranges for kernel memory, we need
to allow the VM module to be initiated with kernel context.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: refactor MMU locks code

remove mmu_cache_lock as it protects a section which is already
protected by mmu_lock.

in addition, wrap mmu cache invalidate calls in hl_vm_ctx_fini with
mmu_lock.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

habanalabs: update firmware boot interface

Update to latest firmware hl_boot_if.h file.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

bus: fsl-mc: add autorescan sysfs

Add the autorescan sysfs in order to enable/disable the DPRC IRQs on
which automatic rescan of the bus is performed. This is important when
dynamic creation of objects is needed to happen in a timely manner because
object creation can be bundled together.

Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210114170752.2927915-6-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: fsl-mc: add bus rescan attribute

Introduce the rescan attribute as a bus attribute to
synchronize the fsl-mc bus objects and the MC firmware.

To rescan the fsl-mc bus, e.g.,
echo 1 > /sys/bus/fsl-mc/rescan

Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210114170752.2927915-5-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: fsl-mc: add fsl-mc userspace support

Adding userspace support for the MC (Management Complex) means exporting
an ioctl capable device file representing the root resource container.

This new functionality in the fsl-mc bus driver intends to provide
userspace applications an interface to interact with the MC firmware.

Commands that are composed in userspace are sent to the MC firmware
through the FSL_MC_SEND_MC_COMMAND ioctl.  By default the implicit MC
I/O portal is used for this operation, but if the implicit one is busy,
a dynamic portal is allocated and then freed upon execution.

The command received through the ioctl interface is checked against a
known whitelist of accepted MC commands. Commands that attempt a change
in hardware configuration will need CAP_NET_ADMIN, while commands used
in debugging do not need it.

Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210114170752.2927915-4-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: fsl-mc: export mc_cmd_hdr_read_cmdid() to the fsl-mc bus

Export the mc_cmd_hdr_read_cmdid() function to the entire fsl-mc bus
since it will be needed in the following patch.

Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210114170752.2927915-3-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: fsl-mc: move fsl_mc_command struct in a uapi header

Define "struct fsl_mc_command" as a structure that can cross the
user/kernel boundary.

Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210114170752.2927915-2-ciorneiioana@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

w1: w1_therm: Fix conversion result for negative temperatures

DS18B20 device driver returns an incorrect value for negative temperatures
due to a missing sign-extension in w1_DS18B20_convert_temp().

Fix by using s16 temperature value when converting to int.

Fixes: 9ace0b4dab1c (w1: w1_therm: Add support for GXCAS GX20MH01 device.)
Cc: stable <stable@vger.kernel.org>
Reported-by: Paweł Marciniak <sunwire@gmail.com>
Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru>
Link: https://lore.kernel.org/r/20210121093021.224764-1-ivan.zaentsev@wirenboard.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/goldfish: Convert pipe tasklet to threaded irq

Tasklets have long been deprecated as being too heavy on the system
by running in irq context - and this is not a performance critical
path. If a higher priority process wants to run, it must wait for
the tasklet to finish before doing so. A more suitable equivalent
is to converted to threaded irq instead and deal with the signaled
pipes in task context.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Link: https://lore.kernel.org/r/20210115002014.117528-1-dave@stgolabs.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ver_linux: Eliminate duplicate code in ldconfig processing logic

The code that acquires the version strings for libc and libcpp is
identical, as is the printversion call. The only difference being the
name of the library being printed.

Refactor the code by unifying the bits that are common to both libraries.

Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Link: https://lore.kernel.org/r/20210108112626.8623-1-alexander.kapshuk@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spdxcheck.py: Use Python 3

Python 2.x has been officially EOL'ed for some time, and in any case
the git module for it is hard to come by.

Signed-off-by: Bert Vermeulen <bert@biot.com>
Link: https://lore.kernel.org/r/20210121085412.265400-1-bert@biot.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virt: vbox: Do not use wait_event_interruptible when called from kernel context

Do not use wait_event_interruptible when vbg_hgcm_call() gets called from
kernel-context, such as it being called by the vboxsf filesystem code.

This fixes some filesystem related system calls on shared folders
unexpectedly failing with -EINTR.

Fixes: 0532a1b0d045 ("virt: vbox: Implement passing requestor info to the host for VirtualBox 6.0.x")
Reported-by: Ludovic Pouzenc <bugreports@pouzenc.fr>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210121150754.147598-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: pvpanic: introduce events device attribue

Suggested by Paolo & Greg, add 'events' device attribute that can be
used to limit which capabilities the driver uses.

Finally, the pvpanic guest driver works by the limitation of both
device capability and user setting.

Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20210110115358.79100-3-pizhenwei@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: pvpanic: introduce device capability

According to pvpanic spec:
https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/specs/pvpanic.txt

The guest should determine pvpanic capability by RDPT, so initialize
capability during device probing. There is no need to register panic
notifier callback function if no events supported.

Before sending event to host side, check capability firstly.

Suggested by Greg KH, use sysfs to expose capability to user space,
also add new sysfs attribute in document.

Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20210110115358.79100-2-pizhenwei@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: pti: Remove driver for deprecated platform

Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.

There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.

Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.

Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210122114358.39299-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

speakup: Add documentation on changing the speakup messages language

This documents how to use speakup_setlocale to set the speakup messages
language.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20210126222147.3848175-5-samuel.thibault@ens-lyon.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

speakup: Simplify spk_ttyio_out error handling.

This avoids most code indentation

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20210126222147.3848175-4-samuel.thibault@ens-lyon.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

speakup: Reference synth from tty and tty from synth

We do not actually need speakup_tty and spk_ttyio_synth global
variables, the synth can store the pointer to the tty, and the tty
ldisc_data can store the pointer to the synth.

Along the way, we can clench the initialization of the synth and the
creation of the tty, so that tty is never NULL. Even if the device
disappears (e.g. USB unplug), the tty structure will still be there,
and we automatically stop speakup in the spk_ttyio_out error handler
but keep tty until the user cleans things up.

As a result, this simplifies locking a lot.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20210126222147.3848175-3-samuel.thibault@ens-lyon.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

speakup: add the missing synth parameter to all io functions

So that we can avoid the spk_ttyio_synth global variable in the next
commit.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20210126222147.3848175-2-samuel.thibault@ens-lyon.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: xilinx: Remove PM_API_MAX value

There is no reason to keep PM_API_MAX around. The commit acfdd18591ea
("firmware: xilinx: Use hash-table for api feature check") removed its
usage that's why it is not used anywhere now.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/86e94593a29a1b5b1958c539a1bfabdd08c0948e.1610959734.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sgi-xp: remove h from printk format specifier

This change fixes the checkpatch warning described in this commit
commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of
  unnecessary %h[xudi] and %hh[xudi]")

Standard integer promotion is already done and %hx and %hhx is useless
so do not encourage the use of %hh[xudi] or %h[xudi].

Reviewed-By: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210123160003.1777766-1-trix@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

most: core: Constify static attribute_group structs

The only usage of these is to put their addresses in arrays of pointers
to const attribute_groups. Make them const to allow the compiler to put
them in read-only memory.

Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210108221512.18811-1-rikard.falkeborn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

greybus: es2: drop short control-transfer checks

There's no need to check for short USB control transfers when sending
data using so remove the redundant sanity checks.

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210118144629.25533-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VMCI: Enforce queuepair max size for IOCTL_VMCI_QUEUEPAIR_ALLOC

When create the VMCI queue pair tracking data structures on the host
side, the IOCTL for creating the VMCI queue pair didn't validate
the queue pair size parameters. This change adds checks for this.

This avoids a memory allocation issue in qp_host_alloc_queue, as
reported by nslusarek@gmx.net. The check in qp_host_alloc_queue
has also been updated to enforce the maximum queue pair size
as defined by VMCI_MAX_GUEST_QP_MEMORY.

The fix has been verified using sample code supplied by
nslusarek@gmx.net.

Reported-by: nslusarek@gmx.net
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/1611160420-30573-1-git-send-email-jhansen@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VMCI: Use set_page_dirty_lock() when unregistering guest memory

When the VMCI host support releases guest memory in the case where
the VM was killed, the pinned guest pages aren't locked. Use
set_page_dirty_lock() instead of set_page_dirty().

Testing done: Killed VM while having an active VMCI based vSocket
connection and observed warning from ext4. With this fix, no
warning was observed. Ran various vSocket tests without issues.

Fixes: 06164d2b72aa ("VMCI: queue pairs implementation.")
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/1611160360-30299-1-git-send-email-jhansen@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VMCI: Stop log spew when qp allocation isn't possible

VMCI queue pair allocation is disabled, if a VM is in FT mode. In
these cases, VMware Tools may still once in a while attempt to
create a vSocket stream connection, resulting in multiple
warnings in the kernel logs. Therefore downgrade the error log to
a debug log.

Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/1611160340-30158-1-git-send-email-jhansen@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc/vmw_vmci: fix typo

change 'addres' to 'address'

Signed-off-by: mateng <mateng@yulong.com>
Link: https://lore.kernel.org/r/20210126084010.1941-1-ayowoe@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: bcm-vk: add ttyVK support

Add ttyVK support to driver to allow console access to VK card from host.

Device node will be in the follow form /dev/bcm-vk.x_ttyVKy where:
x is the instance of the VK card
y is the tty device number on the VK card

Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-14-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MAINTAINERS: bcm-vk: add maintainer for Broadcom VK Driver

Add maintainer entry for new Broadcom VK Driver

Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-13-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: bcm-vk: add mmap function for exposing BAR2

Add mmap function that allows host application to open up BAR2 memory
for remote spooling out messages from the VK logger.

Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-12-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: bcm-vk: reset_pid support

Add reset support via ioctl.
Kill user processes that are open when VK card is reset.
If a particular PID has issued the reset request do not kill that process
as it issued the ioctl.

Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-11-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: bcm-vk: add VK messaging support

Add message support in order to be able to communicate
to VK card via message queues.

This info is used for debug purposes via collection of logs via direct
read of BAR space and by sysfs access (in a follow on commit).

Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-10-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: bcm-vk: add get_card_info, peerlog_info, and proc_mon_info

Add support to get card_info (details about card),
peerlog_info (to get details of peerlog on card),
and proc_mon_info (process monitoring on card).

This info is used for collection of logs via direct
read of BAR space and by sysfs access (in a follow on commit).

Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-9-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: bcm-vk: add ioctl load_image

Add ioctl support to issue load_image operation to VK card.

Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Co-developed-by: James Hu <james.hu@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: James Hu <james.hu@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-8-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: bcm-vk: add open/release

Add open/release to replace private data with context for other methods
to use.  Reason for the context is because it is allowed for multiple
sessions to open sysfs.  For each file open, when upper layer queries the
response, only those that are tied to a specified open should be returned.

Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-7-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: bcm-vk: add triggers when host panic or reboots to notify card

Pass down an interrupt to card in case of panic or reboot so
that card can take appropriate action to perform a clean reset.
Uses kernel notifier block either directly (register on panic list),
or implicitly (add shutdown method for PCI device).

Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-6-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: bcm-vk: add misc device to Broadcom VK driver

Add misc device base support to create and remove devnode.
Additional misc functions for open/read/write/release/ioctl/sysfs, etc
will be added in follow on commits to allow for individual review.

Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-5-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: bcm-vk: add autoload support

Add support to load and boot images on card automatically.
The kernel module parameter auto_load can be passed in as false to disable
such support on probe.
As well, nr_scratch_pages can be specified to allocate more or less scratch
memory on init as needed for desired card operation.

Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Co-developed-by: James Hu <james.hu@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: James Hu <james.hu@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-4-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: bcm-vk: add Broadcom VK driver

Add initial version of Broadcom VK driver to enumerate PCI device IDs
of Valkyrie and Viper device IDs.

VK based cards provide real-time high performance, high throughput,
low latency offload compute engine operations.
They are used for multiple parallel offload tasks as:
audio, video and image processing and crypto operations.

Further commits add additional features to driver beyond probe/remove.

Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-3-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>