linux-2.6-microblaze.git
3 years agonfc: mrvl: skip impossible NCI_MAX_PAYLOAD_SIZE check
Krzysztof Kozlowski [Fri, 28 May 2021 12:41:54 +0000 (08:41 -0400)]
nfc: mrvl: skip impossible NCI_MAX_PAYLOAD_SIZE check

The nci_ctrl_hdr.plen field us u8, so checkign if it is bigger than
NCI_MAX_PAYLOAD_SIZE does not make any sense.  Fix warning reported by
Smatch:

    drivers/nfc/nfcmrvl/i2c.c:52 nfcmrvl_i2c_read() warn:
        impossible condition '(nci_hdr.plen > 255) => (0-255 > 255)'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-6-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonfc: mrvl: mark OF device ID tables as maybe unused
Krzysztof Kozlowski [Fri, 28 May 2021 12:41:53 +0000 (08:41 -0400)]
nfc: mrvl: mark OF device ID tables as maybe unused

The driver can match either via OF or I2C ID tables.  If OF is disabled,
the table will be unused:

    drivers/nfc/nfcmrvl/spi.c:199:34: warning:
        ‘of_nfcmrvl_spi_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-5-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonfc: pn533: drop of_match_ptr from device ID table
Krzysztof Kozlowski [Fri, 28 May 2021 12:41:52 +0000 (08:41 -0400)]
nfc: pn533: drop of_match_ptr from device ID table

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might be not relevant here).  This
fixes compile warning (!CONFIG_OF):

    drivers/nfc/pn533/i2c.c:252:34: warning:
      ‘of_pn533_i2c_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-4-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonfc: port100: correct kerneldoc for structure
Krzysztof Kozlowski [Fri, 28 May 2021 12:41:51 +0000 (08:41 -0400)]
nfc: port100: correct kerneldoc for structure

The port100_in_rf_setting structure does not contain valid kerneldoc
docummentation, unlike the port100_tg_rf_setting structure.  Correct the
kerneldoc to fix W=1 warnings:

    warning: This comment starts with '/**', but isn't a kernel-doc comment.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-3-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonfc: fdp: drop ACPI_PTR from device ID table
Krzysztof Kozlowski [Fri, 28 May 2021 12:41:50 +0000 (08:41 -0400)]
nfc: fdp: drop ACPI_PTR from device ID table

The driver can match only via the ACPI ID table so the table should be
always used and the ACPI_PTR does not have any sense.  This fixes fixes
compile warning (!CONFIG_ACPI):

    drivers/nfc/fdp/i2c.c:362:36: warning:
        ‘fdp_nci_i2c_acpi_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonfc: fdp: correct kerneldoc for structure
Krzysztof Kozlowski [Fri, 28 May 2021 12:41:49 +0000 (08:41 -0400)]
nfc: fdp: correct kerneldoc for structure

Since structure comments are not kerneldoc, remove the double ** to fix
W=1 warnings:

    warning: This comment starts with '/**', but isn't a kernel-doc comment.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210528124200.79655-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agosamples: pktgen: add UDP tx checksum support
Lorenzo Bianconi [Fri, 28 May 2021 14:06:35 +0000 (16:06 +0200)]
samples: pktgen: add UDP tx checksum support

Introduce k parameter in pktgen samples in order to toggle UDP tx
checksum

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/r/cf16417902062c6ea2fd3c79e00510e36a40c31a.1622210713.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agoMerge branch 'net-hdlc_fr-clean-up-some-code-style-issues'
Jakub Kicinski [Fri, 28 May 2021 21:08:13 +0000 (14:08 -0700)]
Merge branch 'net-hdlc_fr-clean-up-some-code-style-issues'

Peng Li says:

====================
net: hdlc_fr: clean up some code style issues

V1 -> V2:
1, Use appropriate commit prefix suggested by Jakub Kicinski,
   replace commit prefix "net: wan" by "net: hdlc_fr".
====================

Link: https://lore.kernel.org/r/1622160769-6678-1-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: hdlc_fr: remove unnecessary out of memory message
Peng Li [Fri, 28 May 2021 00:12:49 +0000 (08:12 +0800)]
net: hdlc_fr: remove unnecessary out of memory message

This patch removes unnecessary out of memory message,
to fix the following checkpatch.pl warning:
"WARNING: Possible unnecessary 'out of memory' message"

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: hdlc_fr: remove redundant braces {}
Peng Li [Fri, 28 May 2021 00:12:48 +0000 (08:12 +0800)]
net: hdlc_fr: remove redundant braces {}

This patch removes redundant braces {}, to fix the
checkpatch.pl warning:
"braces {} are not necessary for any arm of this statement"

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: hdlc_fr: add braces {} to all arms of the statement
Peng Li [Fri, 28 May 2021 00:12:47 +0000 (08:12 +0800)]
net: hdlc_fr: add braces {} to all arms of the statement

Braces {} should be used on all arms of this statement.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: hdlc_fr: remove space after '!'
Peng Li [Fri, 28 May 2021 00:12:46 +0000 (08:12 +0800)]
net: hdlc_fr: remove space after '!'

According to the chackpatch.pl, space prohibited after that '!'.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: hdlc_fr: code indent use tabs where possible
Peng Li [Fri, 28 May 2021 00:12:45 +0000 (08:12 +0800)]
net: hdlc_fr: code indent use tabs where possible

Code indent should use tabs where possible.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: hdlc_fr: move out assignment in if condition
Peng Li [Fri, 28 May 2021 00:12:44 +0000 (08:12 +0800)]
net: hdlc_fr: move out assignment in if condition

Should not use assignment in if condition.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: hdlc_fr: add some required spaces
Peng Li [Fri, 28 May 2021 00:12:43 +0000 (08:12 +0800)]
net: hdlc_fr: add some required spaces

Add spaces required after that close brace '}'.
Add spaces required before the open parenthesis '('.
Add spaces required after that ','.
Add spaces required around that '='.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: hdlc_fr: fix an code style issue about "foo* bar"
Peng Li [Fri, 28 May 2021 00:12:42 +0000 (08:12 +0800)]
net: hdlc_fr: fix an code style issue about "foo* bar"

Fix the checkpatch error as "foo* bar" and should be "foo *bar",
and "(foo*)" should be "(foo *)".

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: hdlc_fr: add blank line after declarations
Peng Li [Fri, 28 May 2021 00:12:41 +0000 (08:12 +0800)]
net: hdlc_fr: add blank line after declarations

This patch fixes the checkpatch error about missing a blank line
after declarations.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: hdlc_fr: remove redundant blank lines
Peng Li [Fri, 28 May 2021 00:12:40 +0000 (08:12 +0800)]
net: hdlc_fr: remove redundant blank lines

This patch removes some redundant blank lines.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agoMerge branch 'mptcp-miscellaneous-cleanup'
Jakub Kicinski [Fri, 28 May 2021 20:59:18 +0000 (13:59 -0700)]
Merge branch 'mptcp-miscellaneous-cleanup'

Mat Martineau says:

====================
mptcp: Miscellaneous cleanup

Here are some cleanup patches we've collected in the MPTCP tree.

Patches 1-4 do some general tidying.

Patch 5 adds an explicit check at netlink command parsing time to
require a port number when the 'signal' flag is set, to catch the error
earlier.

Patches 6 & 7 fix up the MPTCP 'enabled' sysctl, enforcing it as a
boolean value, and ensuring that the !CONFIG_SYSCTL build still works
after the boolean change.
====================

Link: https://lore.kernel.org/r/20210527235430.183465-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agomptcp: restrict values of 'enabled' sysctl
Matthieu Baerts [Thu, 27 May 2021 23:54:30 +0000 (16:54 -0700)]
mptcp: restrict values of 'enabled' sysctl

To avoid confusions, it seems better to parse this sysctl parameter as a
boolean. We use it as a boolean, no need to parse an integer and bring
confusions if we see a value different from 0 and 1, especially with
this parameter name: enabled.

It seems fine to do this modification because the default value is 1
(enabled). Then the only other interesting value to set is 0 (disabled).
All other values would not have changed the default behaviour.

Suggested-by: Florian Westphal <fw@strlen.de>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agomptcp: support SYSCTL only if enabled
Matthieu Baerts [Thu, 27 May 2021 23:54:29 +0000 (16:54 -0700)]
mptcp: support SYSCTL only if enabled

Since the introduction of the sysctl support in MPTCP with
commit 784325e9f037 ("mptcp: new sysctl to control the activation per NS"),
we don't check CONFIG_SYSCTL.

Until now, that was not an issue: the register and unregister functions
were replaced by NO-OP one if SYSCTL was not enabled in the config. The
only thing we could have avoid is not to reserve memory for the table
but that's for the moment only a small table per net-ns.

But the following commit is going to use SYSCTL_ZERO and SYSCTL_ONE
which are not be defined if SYSCTL is not enabled in the config. This
causes 'undefined reference' errors from the linker.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agomptcp: make sure flag signal is set when add addr with port
Jianguo Wu [Thu, 27 May 2021 23:54:28 +0000 (16:54 -0700)]
mptcp: make sure flag signal is set when add addr with port

When add address with port, it is mean to create a listening socket,
and send an ADD_ADDR to remote, so it must have flag signal set,
add this check in mptcp_pm_parse_addr().

Fixes: a77e9179c7651 ("mptcp: deal with MPTCP_PM_ADDR_ATTR_PORT in PM netlink")
Acked-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agomptcp: remove redundant initialization in pm_nl_init_net()
Jianguo Wu [Thu, 27 May 2021 23:54:27 +0000 (16:54 -0700)]
mptcp: remove redundant initialization in pm_nl_init_net()

Memory of struct pm_nl_pernet{} is allocated by kzalloc()
in setup_net()->ops_init(), so it's no need to reset counters
and zero bitmap in pm_nl_init_net().

Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agomptcp: generate subflow hmac after mptcp_finish_join()
Jianguo Wu [Thu, 27 May 2021 23:54:26 +0000 (16:54 -0700)]
mptcp: generate subflow hmac after mptcp_finish_join()

For outgoing subflow join, when recv SYNACK, in subflow_finish_connect(),
the mptcp_finish_join() may return false in some cases, and send a RESET
to remote, and no local hmac is required.
So generate subflow hmac after mptcp_finish_join().

Fixes: ec3edaa7ca6c ("mptcp: Add handling of outgoing MP_JOIN requests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agomptcp: using TOKEN_MAX_RETRIES instead of magic number
Jianguo Wu [Thu, 27 May 2021 23:54:25 +0000 (16:54 -0700)]
mptcp: using TOKEN_MAX_RETRIES instead of magic number

We have macro TOKEN_MAX_RETRIES for the number of token generate retries,
so using TOKEN_MAX_RETRIES in subflow_check_req().

And rename TOKEN_MAX_RETRIES to MPTCP_TOKEN_MAX_RETRIES as it is now
exposed.

Fixes: 535fb8152f31 ("mptcp: token: move retry to caller")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agomptcp: fix pr_debug in mptcp_token_new_connect
Jianguo Wu [Thu, 27 May 2021 23:54:24 +0000 (16:54 -0700)]
mptcp: fix pr_debug in mptcp_token_new_connect

After commit 2c5ebd001d4f ("mptcp: refactor token container"),
pr_debug() is called before mptcp_crypto_key_gen_sha() in
mptcp_token_new_connect(), so the output local_key, token and
idsn are 0, like:

  MPTCP: ssk=00000000f6b3c4a2, local_key=0, token=0, idsn=0

Move pr_debug() after mptcp_crypto_key_gen_sha().

Fixes: 2c5ebd001d4f ("mptcp: refactor token container")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agoMerge tag 'mlx5-updates-2021-05-26' of git://git.kernel.org/pub/scm/linux/kernel...
Jakub Kicinski [Fri, 28 May 2021 00:14:22 +0000 (17:14 -0700)]
Merge tag 'mlx5-updates-2021-05-26' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2021-05-26

Misc update for mlx5 driver,

1) Clean up patches for lag and SF

2) Reserve bit 31 in steering register C1 for IPSec offload usage

3) Move steering tables pool logic into the steering core and
  increase the maximum table size to 2G entries when software steering
  is enabled.

* tag 'mlx5-updates-2021-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: Fix lag port remapping logic
  net/mlx5: Use boolean arithmetic to evaluate roce_lag
  net/mlx5: Remove unnecessary spin lock protection
  net/mlx5: Cap the maximum flow group size to 16M entries
  net/mlx5: DR, Set max table size to 2G entries
  net/mlx5: Move chains ft pool to be used by all firmware steering
  net/mlx5: Move table size calculation to steering cmd layer
  net/mlx5: Add case for FS_FT_NIC_TX FT in MLX5_CAP_FLOWTABLE_TYPE
  net/mlx5: DR, Remove unused field of send_ring struct
  net/mlx5e: RX, Remove unnecessary check in RX CQE compression handling
  net/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packet
  net/mlx5e: TC: Reserved bit 31 of REG_C1 for IPsec offload
  net/mlx5e: TC: Use bit counts for register mapping
  net/mlx5: CT: Avoid reusing modify header context for natted entries
  net/mlx5e: CT, Remove newline from ct_dbg call
====================

Link: https://lore.kernel.org/r/20210527185624.694304-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agoixgbe: Fix out-bounds warning in ixgbe_host_interface_command()
Gustavo A. R. Silva [Thu, 27 May 2021 17:34:24 +0000 (10:34 -0700)]
ixgbe: Fix out-bounds warning in ixgbe_host_interface_command()

Replace union with a couple of pointers in order to fix the following
out-of-bounds warning:

  CC [M]  drivers/net/ethernet/intel/ixgbe/ixgbe_common.o
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c: In function ‘ixgbe_host_interface_command’:
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:3729:13: warning: array subscript 1 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
 3729 |   bp->u32arr[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
      |   ~~~~~~~~~~^~~~
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:3682:7: note: while referencing ‘u32arr’
 3682 |   u32 u32arr[1];
      |       ^~~~~~

This helps with the ongoing efforts to globally enable -Warray-bounds.

Link: https://github.com/KSPP/linux/issues/109
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20210527173424.362456-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agoMerge branch 'add-4-rx-tx-queue-support-for-mikrotik-10-25g-nic'
Jakub Kicinski [Thu, 27 May 2021 23:06:48 +0000 (16:06 -0700)]
Merge branch 'add-4-rx-tx-queue-support-for-mikrotik-10-25g-nic'

Gatis Peisenieks says:

====================
add 4 RX/TX queue support for Mikrotik 10/25G NIC

More RX/TX queues on a network card help spread the CPU load among
cores and achieve higher overall networking performance.
This patch set adds support for 4 RX/TX queues available on
Mikrotik 10/25G NIC.

v4:
    - addressed comments from Jakub Kicinski:
      - split up the change in more manageable chunks
      - changed member order in structs for tighter packing
      - fixed style issues
    - reverted to calling napi_alloc_skb only from within poll
      as before
v3:
    - fix kernel-doc complaints on comments as pointed out by
      David Miller
v2:
    - rebase on net-next master as requested by David Miller
====================

Link: https://lore.kernel.org/r/20210527144423.3395719-1-gatis@mikrotik.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agoatl1c: add 4 RX/TX queue support for Mikrotik 10/25G NIC
Gatis Peisenieks [Thu, 27 May 2021 14:44:23 +0000 (17:44 +0300)]
atl1c: add 4 RX/TX queue support for Mikrotik 10/25G NIC

More RX/TX queues on a network card help spread the CPU load among
cores and achieve higher overall networking performance. The new
Mikrotik 10/25G NIC supports 4 RX and 4 TX queues. TX queues are
treated with equal priority. RX queue balancing is fixed based on
L2/L3/L4 hash.

This adds support for 4 RX/TX queues while maintaining backwards
compatibility with older hardware.

Simultaneous TX + RX performance on AMD Threadripper 3960X
with Mikrotik 10/25G NIC improved from 1.6Mpps to 3.2Mpps per port.

Backwards compatiblitiy was verified with AR8151 and AR8131 based
NICs.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agoatl1c: prepare for multiple rx queues
Gatis Peisenieks [Thu, 27 May 2021 14:44:22 +0000 (17:44 +0300)]
atl1c: prepare for multiple rx queues

Move napi and other per queue members into per rx queue struct.
Allocate max rx queues that any hw supported by the driver might have.
Patch that actually enables multiple rx queues will follow.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agoatl1c: move tx napi into tpd_ring
Gatis Peisenieks [Thu, 27 May 2021 14:44:21 +0000 (17:44 +0300)]
atl1c: move tx napi into tpd_ring

To get more performance from using multiple tx queues one needs
a per tx queue napi.

Move tx napi from per adapter struct into per tx queue struct.
Patch that actually enables multiple tx queues will follow.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agoatl1c: detect NIC type early
Gatis Peisenieks [Thu, 27 May 2021 14:44:20 +0000 (17:44 +0300)]
atl1c: detect NIC type early

To support NICs that allow for more than one tx queue it is
required to detect NIC type early during probe. This is moves
NIC type detection before netdev_alloc to prepare for that.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agoMerge branch 'mlx-devlink-dev-info-versions-adjustments'
Jakub Kicinski [Thu, 27 May 2021 21:51:20 +0000 (14:51 -0700)]
Merge branch 'mlx-devlink-dev-info-versions-adjustments'

Jiri Pirko says:

====================
mlx*: devlink dev info versions adjustments

Couple of adjustments in Mellanox drivers regarding devlink dev
versions fill-up.
====================

Link: https://lore.kernel.org/r/20210526104509.761807-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agomlxsw: core: use PSID string define in devlink info
Jiri Pirko [Wed, 26 May 2021 10:45:09 +0000 (12:45 +0200)]
mlxsw: core: use PSID string define in devlink info

Instead of having the string spelled out in the driver, use the global
define with the same value.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agomlxsw: core: Expose FW version over defined keyword
Jiri Pirko [Wed, 26 May 2021 10:45:08 +0000 (12:45 +0200)]
mlxsw: core: Expose FW version over defined keyword

To be aligned with the rest of the drivers, expose FW version under "fw"
keyword in devlink dev info, in addition to the existing "fw.version",
which is currently Mellanox-specific.

devlink output before:
       running:
         fw.version 30.2008.2018
after:
       running:
         fw.version 30.2008.2018
         fw 30.2008.2018

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet/mlx5: Expose FW version over defined keyword
Jiri Pirko [Wed, 26 May 2021 10:45:07 +0000 (12:45 +0200)]
net/mlx5: Expose FW version over defined keyword

To be aligned with the rest of the drivers, expose FW version under "fw"
keyword in devlink dev info, in addition to the existing "fw.version",
which is currently Mellanox-specific.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agoselftests: devlink_lib: add check for devlink device existence
Jiri Pirko [Thu, 27 May 2021 10:55:15 +0000 (12:55 +0200)]
selftests: devlink_lib: add check for devlink device existence

If user passes devlink handle over DEVLINK_DEV variable, check if the
device exists.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20210527105515.790330-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agoMerge tag 'linux-can-next-for-5.14-20210527' of git://git.kernel.org/pub/scm/linux...
Jakub Kicinski [Thu, 27 May 2021 21:38:13 +0000 (14:38 -0700)]
Merge tag 'linux-can-next-for-5.14-20210527' of git://git./linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
can-next 2021-05-27

The first 2 patches are by Geert Uytterhoeven and convert the rcan_can
and rcan_canfd device tree bindings to yaml.

The next 2 patches are by Oliver Hartkopp and me and update the CAN
uapi headers.

zuoqilin's patch removes an unnecessary variable from the CAN proc
code.

Patrick Menschel contributes 3 patches for CAN ISOTP to enhance the
error messages.

Jiapeng Chong's patch removes two dead stores from the softing driver.

The next 4 patches are by me and silence several warnings found by
clang compiler.

Jimmy Assarsson's patches for the kvaser_usb driver add support for
the Kvaser hydra devices.

Dario Binacchi provides 2 patches for the c_can driver, first removing
an unused variable, then adding basic ethtool support to query driver
and ring parameter info.

The last 4 patches are by Torin Cooper-Bennun and clean up the m_can
driver.

* tag 'linux-can-next-for-5.14-20210527' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (21 commits)
  can: m_can: fix whitespace in a few comments
  can: m_can: make TXESC, RXESC config more explicit
  can: m_can: clean up CCCR reg defs, order by revs
  can: m_can: use bits.h macros for all regmasks
  can: c_can: add ethtool support
  can: c_can: remove unused variable struct c_can_priv::rxmasked
  can: kvaser_usb: Add new Kvaser hydra devices
  can: kvaser_usb: Rename define USB_HYBRID_{,PRO_}CANLIN_PRODUCT_ID
  can: at91_can: silence clang warning
  can: mcp251xfd: silence clang warning
  can: mcp251x: mcp251x_can_probe(): silence clang warning
  can: hi311x: hi3110_can_probe(): silence clang warning
  can: softing: Remove redundant variable ptr
  can: isotp: Add error message if txqueuelen is too small
  can: isotp: add symbolic error message to isotp_module_init()
  can: isotp: change error format from decimal to symbolic error names
  can: proc: remove unnecessary variables
  can: uapi: introduce CANFD_FDF flag for mixed content in struct canfd_frame
  can: uapi: update CAN-FD frame description
  dt-bindings: can: rcar_canfd: Convert to json-schema
  ...
====================

Link: https://lore.kernel.org/r/20210527084532.1384031-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agodevlink: append split port number to the port name
Jiri Pirko [Thu, 27 May 2021 10:48:19 +0000 (12:48 +0200)]
devlink: append split port number to the port name

Instead of doing sprintf twice in case the port is split or not, append
the split port suffix in case the port is split.

Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20210527104819.789840-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet/mlx5: Fix lag port remapping logic
Eli Cohen [Mon, 3 May 2021 11:39:58 +0000 (14:39 +0300)]
net/mlx5: Fix lag port remapping logic

Fix the logic so that if both ports netdevices are enabled or disabled,
use the trivial mapping without swapping.

If only one of the netdevice's tx is enabled, use it to remap traffic to
that port.

Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
3 years agonet/mlx5: Use boolean arithmetic to evaluate roce_lag
Eli Cohen [Mon, 3 May 2021 09:35:05 +0000 (12:35 +0300)]
net/mlx5: Use boolean arithmetic to evaluate roce_lag

Avoid mixing boolean and bit arithmetic when evaluating validity of
roce_lag.

Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
3 years agonet/mlx5: Remove unnecessary spin lock protection
Eli Cohen [Mon, 3 May 2021 06:22:43 +0000 (09:22 +0300)]
net/mlx5: Remove unnecessary spin lock protection

Taking lag_lock to access ldev->tracker is meaningless in the context of
do_bond() and mlx5_lag_netdev_event().

Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
3 years agonet/mlx5: Cap the maximum flow group size to 16M entries
Paul Blakey [Thu, 11 Mar 2021 09:35:39 +0000 (11:35 +0200)]
net/mlx5: Cap the maximum flow group size to 16M entries

The maximum number of large flow groups applies to both small and large
tables. For very large tables (such as the 2G SW steering tables) this may
create a small number of flow groups each with an unrealistic entries
domain (> 16M).

Set the maximum number of large flow groups to at least what user
requested, but with a maximum per group size of 16M entries.
For software steering, if user requested less than 128 large flow
groups, it will gives us about 128 16M groups in a 2G
entries tables.

Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
3 years agonet/mlx5: DR, Set max table size to 2G entries
Paul Blakey [Mon, 8 Mar 2021 12:52:41 +0000 (14:52 +0200)]
net/mlx5: DR, Set max table size to 2G entries

SW steering has no table size limitations.
However, fs_core API is size aware.

Set SW steering tables to the maximum possible table size (INT_MAX).

Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
3 years agonet/mlx5: Move chains ft pool to be used by all firmware steering
Paul Blakey [Mon, 8 Mar 2021 12:16:02 +0000 (14:16 +0200)]
net/mlx5: Move chains ft pool to be used by all firmware steering

Firmware FT pool is per device, but the software tracking of this pool
only services fs_chains users, and if another layer takes a flow table,
the pool will not be updated, and fs_chains will fail creating a flow
table, with no recovery till the flow table is returned.

Move FT pool to be global per device, and stored at the cmd level,
so all layers can use it.

Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
3 years agonet/mlx5: Move table size calculation to steering cmd layer
Paul Blakey [Mon, 8 Mar 2021 12:20:24 +0000 (14:20 +0200)]
net/mlx5: Move table size calculation to steering cmd layer

Currently the table size is calculated by the fs_core layer. However, each
steering cmd instance has a different allocation logic. FW steering uses
a predefined pools of multiple sizes. SW steering doesn't have a pool,
and can allocate any size of tables.

Move the table size calculation to the steering cmd layer as a pre-step
for moving fs_chains pool logic globally to firmware steering, and
increasing table sizes for software steering. In addition, change the
size parameter to absolute size to allow the special zero value to
mean "get next available maximum size".

Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
3 years agonet/mlx5: Add case for FS_FT_NIC_TX FT in MLX5_CAP_FLOWTABLE_TYPE
Paul Blakey [Tue, 30 Mar 2021 17:59:50 +0000 (20:59 +0300)]
net/mlx5: Add case for FS_FT_NIC_TX FT in MLX5_CAP_FLOWTABLE_TYPE

Commit 16f1c5bb3ed7 ("net/mlx5: Check device capability for maximum flow
counters") added MLX5_CAP_FLOWTABLE_TYPE but forgot to account
for FS_FT_NIC_TX case in the expression.

Although the expression will return 1 for this case instead of the
actual cap, there isn't currently no known side affects of
missing this case.

Add the FS_FT_NIC_TX case.

Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
3 years agonet/mlx5: DR, Remove unused field of send_ring struct
Yevgeny Kliteynik [Tue, 23 Mar 2021 01:08:56 +0000 (03:08 +0200)]
net/mlx5: DR, Remove unused field of send_ring struct

Remove unused field of struct mlx5dr_send_ring

Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
3 years agonet/mlx5e: RX, Remove unnecessary check in RX CQE compression handling
Tariq Toukan [Thu, 22 Apr 2021 15:34:57 +0000 (18:34 +0300)]
net/mlx5e: RX, Remove unnecessary check in RX CQE compression handling

There are two reasons for exiting mlx5e_decompress_cqes_cont():
1. The compression session is completed (cqd.left == 0).
2. The budget is exhausted (work_done == budget).

If after calling mlx5e_decompress_cqes_cont() we have cqd.left > 0,
it necessarily implies that budget is exhausted.

The first part of the complex condition is covered by the second,
hence we remove it here.

Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
3 years agonet/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packet
Huy Nguyen [Tue, 15 Dec 2020 16:58:54 +0000 (10:58 -0600)]
net/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packet

rep_tc copy REG_C1 to REG_B. IPsec crypto utilizes the whole REG_B
register with BIT31 as IPsec marker. rep_tc_update_skb drops
IPsec because it thought REG_B contains bad value.

In previous patch, BIT 31 of REG_C1 is reserved for IPsec.
Skip the rep_tc_update_skb if BIT31 of REG_B is set.

Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
3 years agonet/mlx5e: TC: Reserved bit 31 of REG_C1 for IPsec offload
Huy Nguyen [Mon, 23 Nov 2020 20:48:22 +0000 (14:48 -0600)]
net/mlx5e: TC: Reserved bit 31 of REG_C1 for IPsec offload

Currently ASAP features fully utilize all the bits of the CQE's flow tag
and ft_metadata field. The flow tag field cannot be used because the
flow table tagging in FTE does not allow partial write.

We agree to reserve bit 31 of CQE's ft_metadata for IPsec to avoid
ASAP CT from dropping IPsec offloaded packet

Here is the new bit layout of REG_C1. Tunnel option id is reduced to
11 bits:
< IPSEC MARKER (1) | ESW_TUN_ID(12) | ESW_TUN_OPTS(11) | ESW_ZONE_ID(8) >

Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
3 years agonet/mlx5e: TC: Use bit counts for register mapping
Paul Blakey [Wed, 10 Mar 2021 13:00:05 +0000 (15:00 +0200)]
net/mlx5e: TC: Use bit counts for register mapping

To prepare for next patch where we will use a non-byte
aligned mapping, change all byte counts in register
mapping to bits.

Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
3 years agonet/mlx5: CT: Avoid reusing modify header context for natted entries
Paul Blakey [Mon, 19 Apr 2021 12:50:58 +0000 (15:50 +0300)]
net/mlx5: CT: Avoid reusing modify header context for natted entries

Currently the driver is designed to reuse header modify context entries.
Natted entries will always have a unique modify header, as such the
modify header hashtable lookup is introducing an overhead. When the
hashtable size exceeded 200k entries the tested insertion rate dropped
from ~10k entries/sec to ~300 entries/sec.

Don't use the re-use mechanism when creating modify headers
for natted tuples.

Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
3 years agonet/mlx5e: CT, Remove newline from ct_dbg call
Roi Dayan [Thu, 11 Mar 2021 07:53:32 +0000 (09:53 +0200)]
net/mlx5e: CT, Remove newline from ct_dbg call

ct_dbg() already adds a newline.

Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
3 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Jakub Kicinski [Thu, 27 May 2021 16:22:11 +0000 (09:22 -0700)]
Merge git://git./linux/kernel/git/netdev/net

cdc-wdm: s/kill_urbs/poison_urbs/ to fix build

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agocan: m_can: fix whitespace in a few comments
Torin Cooper-Bennun [Tue, 4 May 2021 12:51:23 +0000 (13:51 +0100)]
can: m_can: fix whitespace in a few comments

Fixes whitespace in comments titling sections of register masks.

Link: https://lore.kernel.org/r/20210504125123.500553-5-torin@maxiluxsystems.com
Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: m_can: make TXESC, RXESC config more explicit
Torin Cooper-Bennun [Tue, 4 May 2021 12:51:22 +0000 (13:51 +0100)]
can: m_can: make TXESC, RXESC config more explicit

Introduce masks for the three RXESC fields (RBDS, F1DS, F0DS) and the
one TXESC field (TBDS). Update m_can_chip_config() to explicitly set all
four fields to the 64-byte option (0x7) (and these defs are renamed to
be more concise).

This is an improvement in maintainability, and also makes it easier to
implement more flexible configuration of the M_CAN buffers in the
future.

Link: https://lore.kernel.org/r/20210504125123.500553-4-torin@maxiluxsystems.com
Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: m_can: clean up CCCR reg defs, order by revs
Torin Cooper-Bennun [Tue, 4 May 2021 12:51:21 +0000 (13:51 +0100)]
can: m_can: clean up CCCR reg defs, order by revs

Ensures that the different CCCR regmasks for m_can revs 3.0.x, 3.1.x,
3.2.x and 3.3.x are clearly distinguishable. Removes incorrect
CCCR_CANFD define. Adds bit fields UTSU and WMM for rev 3.3.x, for
completeness.

Link: https://lore.kernel.org/r/20210504125123.500553-3-torin@maxiluxsystems.com
Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: m_can: use bits.h macros for all regmasks
Torin Cooper-Bennun [Tue, 4 May 2021 12:51:20 +0000 (13:51 +0100)]
can: m_can: use bits.h macros for all regmasks

This updates m_can.c to exclusively use GENMASK, FIELD_GET, FIELD_PREP
and FIELD_MAX for regmask ops, as is convention in the current kernel
(far less error-prone, far more concise).

Link: https://lore.kernel.org/r/20210504125123.500553-2-torin@maxiluxsystems.com
Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: c_can: add ethtool support
Dario Binacchi [Fri, 14 May 2021 16:55:47 +0000 (18:55 +0200)]
can: c_can: add ethtool support

With commit 132f2d45fb23 ("can: c_can: add support to 64 message
objects") the number of message objects used for reception /
transmission depends on FIFO size.

The ethtools API support allows you to retrieve this info. Driver info
has been added too.

Link: https://lore.kernel.org/r/20210514165549.14365-2-dariobin@libero.it
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: c_can: remove unused variable struct c_can_priv::rxmasked
Dario Binacchi [Sun, 9 May 2021 12:43:07 +0000 (14:43 +0200)]
can: c_can: remove unused variable struct c_can_priv::rxmasked

The member rxmasked of struct c_can_priv is initialized by
c_can_chip_config(), but's it's never used, so remove it.

Link: https://lore.kernel.org/r/20210509124309.30024-2-dariobin@libero.it
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: kvaser_usb: Add new Kvaser hydra devices
Jimmy Assarsson [Thu, 29 Apr 2021 09:37:30 +0000 (11:37 +0200)]
can: kvaser_usb: Add new Kvaser hydra devices

Add new Kvaser hydra devices.

Link: https://lore.kernel.org/r/20210429093730.499263-2-extja@kvaser.com
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: kvaser_usb: Rename define USB_HYBRID_{,PRO_}CANLIN_PRODUCT_ID
Jimmy Assarsson [Thu, 29 Apr 2021 09:37:29 +0000 (11:37 +0200)]
can: kvaser_usb: Rename define USB_HYBRID_{,PRO_}CANLIN_PRODUCT_ID

Rename define USB_HYBRID_{,PRO_}CANLIN_PRODUCT_ID to
USB_HYBRID_{,PRO_}2CANLIN_PRODUCT_ID, to reflect the channel count.

Link: https://lore.kernel.org/r/20210429093730.499263-1-extja@kvaser.com
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: at91_can: silence clang warning
Marc Kleine-Budde [Wed, 5 May 2021 08:06:24 +0000 (10:06 +0200)]
can: at91_can: silence clang warning

This patch fixes the following clang warning, by marking the functions
as maybe unused. gcc doesn't complain about unused inline functions.

| drivers/net/can/at91_can.c:178:1: warning: unused function 'at91_is_sam9X5' [-Wunused-function]
| AT91_IS(9X5);
| ^
| drivers/net/can/at91_can.c:172:19: note: expanded from macro 'AT91_IS'
| static inline int at91_is_sam##_model(const struct at91_priv *priv) \
|                   ^
| <scratch space>:66:1: note: expanded from here
| at91_is_sam9X5
| ^

Link: https://lore.kernel.org/r/20210514153741.1958041-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: mcp251xfd: silence clang warning
Marc Kleine-Budde [Wed, 5 May 2021 08:07:48 +0000 (10:07 +0200)]
can: mcp251xfd: silence clang warning

This patch fixes the following clang warning, by marking the functions
as maybe unused. gcc doesn't complain about unused inline functions.

| drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c:564:1: warning: unused function 'mcp251xfd_chip_set_mode_nowait' [-Wunused-function]
| mcp251xfd_chip_set_mode_nowait(const struct mcp251xfd_priv *priv,
| ^
| 1 warning generated.

Link: https://lore.kernel.org/r/20210514153741.1958041-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: mcp251x: mcp251x_can_probe(): silence clang warning
Marc Kleine-Budde [Tue, 4 May 2021 19:55:10 +0000 (21:55 +0200)]
can: mcp251x: mcp251x_can_probe(): silence clang warning

This patch silences the following clang warning:

| drivers/net/can/spi/mcp251x.c:1333:17: warning: cast to smaller integer type
| 'enum mcp251x_model' from 'const void *' [-Wvoid-pointer-to-enum-cast]
|                 priv->model = (enum mcp251x_model)match;
|                               ^~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: 8de29a5c34a5 ("can: mcp251x: Make use of device property API")
Link: https://lore.kernel.org/r/20210504200520.1179635-2-mkl@pengutronix.de
Reported-by: kernel test robot <lkp@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: hi311x: hi3110_can_probe(): silence clang warning
Marc Kleine-Budde [Tue, 4 May 2021 19:55:10 +0000 (21:55 +0200)]
can: hi311x: hi3110_can_probe(): silence clang warning

This patch silences the following clang warning:

| drivers/net/can/spi/hi311x.c:874:17: warning: cast to smaller integer type
| 'enum hi3110_model' from 'const void *' [-Wvoid-pointer-to-enum-cast]
|                 priv->model = (enum hi3110_model)of_id->data;
|                               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver")
Link: https://lore.kernel.org/r/20210504200520.1179635-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: softing: Remove redundant variable ptr
Jiapeng Chong [Tue, 27 Apr 2021 10:52:47 +0000 (18:52 +0800)]
can: softing: Remove redundant variable ptr

The value stored to ptr in the calculations this patch removes is not
used, so the calculation and the assignment can be removed.

Cleans up the following clang-analyzer warning:

drivers/net/can/softing/softing_main.c:279:3: warning: Value stored to
'ptr' is never read [clang-analyzer-deadcode.DeadStores].

drivers/net/can/softing/softing_main.c:242:3: warning: Value stored to
'ptr' is never read [clang-analyzer-deadcode.DeadStores].

Link: https://lore.kernel.org/r/1619520767-80948-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: isotp: Add error message if txqueuelen is too small
Patrick Menschel [Tue, 27 Apr 2021 05:21:49 +0000 (05:21 +0000)]
can: isotp: Add error message if txqueuelen is too small

This patch adds an additional error message in case that txqueuelen is
set too small and advices the user to increase txqueuelen.

This is likely to happen even with small transfers if txqueuelen is at
default value 10 frames.

Link: https://lore.kernel.org/r/20210427052150.2308-4-menschel.p@posteo.de
Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: isotp: add symbolic error message to isotp_module_init()
Patrick Menschel [Tue, 27 Apr 2021 05:21:48 +0000 (05:21 +0000)]
can: isotp: add symbolic error message to isotp_module_init()

This patch adds the value of err with format %pe to the already
existing error message.

Link: https://lore.kernel.org/r/20210427052150.2308-3-menschel.p@posteo.de
Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: isotp: change error format from decimal to symbolic error names
Patrick Menschel [Tue, 27 Apr 2021 05:21:47 +0000 (05:21 +0000)]
can: isotp: change error format from decimal to symbolic error names

This patch changes the format string for errors from decimal %d to
symbolic error names %pe to achieve more comprehensive log messages.

Link: https://lore.kernel.org/r/20210427052150.2308-2-menschel.p@posteo.de
Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: proc: remove unnecessary variables
zuoqilin [Fri, 14 May 2021 10:08:06 +0000 (18:08 +0800)]
can: proc: remove unnecessary variables

There is no need to define the variable "rate" to receive, just return
directly.

Link: https://lore.kernel.org/r/20210514100806.792-1-zuoqilin1@163.com
Signed-off-by: zuoqilin <zuoqilin@yulong.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: uapi: introduce CANFD_FDF flag for mixed content in struct canfd_frame
Oliver Hartkopp [Tue, 11 Apr 2017 13:43:43 +0000 (15:43 +0200)]
can: uapi: introduce CANFD_FDF flag for mixed content in struct canfd_frame

The struct can_frame and struct canfd_frame intentionally share the
same layout to be able to write CAN frame content into a CAN FD frame
structure. When this is done the former differentiation via CAN_MTU /
CANFD_MTU is lost. CANFD_FDF allows programmers to mark CAN FD frames
in the case of using struct canfd_frame for mixed CAN/CAN FD
content (dual use).

N.B. the Kernel APIs do NOT provide mixed CAN / CAN FD content inside
of struct canfd_frame therefore the CANFD_FDF flag is disregarded by
Linux.

Link: https://lore.kernel.org/r/20170411134343.3089-1-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agocan: uapi: update CAN-FD frame description
Marc Kleine-Budde [Mon, 17 May 2021 11:24:25 +0000 (13:24 +0200)]
can: uapi: update CAN-FD frame description

Since an early version of the CAN-FD specification the bit that
defines a CAN-FD frame on the wire, has been renamed from Extended
Data Length (EDL) to FD Frame (FDF).

To avoid confusion, update the struct canfd_frame description in the
UAPI headers accordingly.

Link: https://lore.kernel.org/r/20210517113727.77597-1-mkl@pengutronix.de
Suggested-by: Ayoub Kaanich <kayoub5@live.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agodt-bindings: can: rcar_canfd: Convert to json-schema
Geert Uytterhoeven [Thu, 6 May 2021 17:55:54 +0000 (19:55 +0200)]
dt-bindings: can: rcar_canfd: Convert to json-schema

Convert the Renesas R-Car CAN FD Controller Device Tree binding
documentation to json-schema.

Document missing properties.
The CANFD clock needs to be configured for the maximum frequency on
R-Car V3M and V3H, too.
Update the example to match reality.

Link: https://lore.kernel.org/r/905134c87f72e2d8e37c309e0ce28ecd7d4f3992.1620323639.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agodt-bindings: can: rcar_can: Convert to json-schema
Geert Uytterhoeven [Thu, 6 May 2021 17:55:53 +0000 (19:55 +0200)]
dt-bindings: can: rcar_can: Convert to json-schema

Convert the Renesas R-Car CAN Controller Device Tree binding
documentation to json-schema.

Document missing properties.
Update the example to match reality.

Link: https://lore.kernel.org/r/561c35648e22a3c1e3b5477ae27fd1a50da7fe98.1620323639.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
3 years agoMerge tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Linus Torvalds [Thu, 27 May 2021 03:44:49 +0000 (17:44 -1000)]
Merge tag 'net-5.13-rc4' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.13-rc4, including fixes from bpf, netfilter,
  can and wireless trees. Notably including fixes for the recently
  announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
  touching some core parts of the stack, too, but nothing hair-raising.

  Current release - regressions:

   - tipc: make node link identity publish thread safe

   - dsa: felix: re-enable TAS guard band mode

   - stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()

   - stmmac: fix system hang if change mac address after interface
     ifdown

  Current release - new code bugs:

   - mptcp: avoid OOB access in setsockopt()

   - bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers

   - ethtool: stats: fix a copy-paste error - init correct array size

  Previous releases - regressions:

   - sched: fix packet stuck problem for lockless qdisc

   - net: really orphan skbs tied to closing sk

   - mlx4: fix EEPROM dump support

   - bpf: fix alu32 const subreg bound tracking on bitwise operations

   - bpf: fix mask direction swap upon off reg sign change

   - bpf, offload: reorder offload callback 'prepare' in verifier

   - stmmac: Fix MAC WoL not working if PHY does not support WoL

   - packetmmap: fix only tx timestamp on request

   - tipc: skb_linearize the head skb when reassembling msgs

  Previous releases - always broken:

   - mac80211: address recent "FragAttacks" vulnerabilities

   - mac80211: do not accept/forward invalid EAPOL frames

   - mptcp: avoid potential error message floods

   - bpf, ringbuf: deny reserve of buffers larger than ringbuf to
     prevent out of buffer writes

   - bpf: forbid trampoline attach for functions with variable arguments

   - bpf: add deny list of functions to prevent inf recursion of tracing
     programs

   - tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT

   - can: isotp: prevent race between isotp_bind() and
     isotp_setsockopt()

   - netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
     fallback to non-AVX2 version

  Misc:

   - bpf: add kconfig knob for disabling unpriv bpf by default"

* tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits)
  net: phy: Document phydev::dev_flags bits allocation
  mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer
  mptcp: avoid error message on infinite mapping
  mptcp: drop unconditional pr_warn on bad opt
  mptcp: avoid OOB access in setsockopt()
  nfp: update maintainer and mailing list addresses
  net: mvpp2: add buffer header handling in RX
  bnx2x: Fix missing error code in bnx2x_iov_init_one()
  net: zero-initialize tc skb extension on allocation
  net: hns: Fix kernel-doc
  sctp: fix the proc_handler for sysctl encap_port
  sctp: add the missing setting for asoc encap_port
  bpf, selftests: Adjust few selftest result_unpriv outcomes
  bpf: No need to simulate speculative domain for immediates
  bpf: Fix mask direction swap upon off reg sign change
  bpf: Wrap aux data inside bpf_sanitize_info container
  bpf: Fix BPF_LSM kconfig symbol dependency
  selftests/bpf: Add test for l3 use of bpf_redirect_peer
  bpftool: Add sock_release help info for cgroup attach/prog load command
  net: dsa: microchip: enable phy errata workaround on 9567
  ...

3 years agoMerge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Jakub Kicinski [Thu, 27 May 2021 01:33:01 +0000 (18:33 -0700)]
Merge branch '1GbE' of git://git./linux/kernel/git/tnguy/next-queue

Tony Nguyen says:

====================
1GbE Intel Wired LAN Driver Updates 2021-05-26

Jesse Brandeburg says:

In this series I address the C=2 (sparse) warnings. The goal is to be
completely sparse clean in the drivers/net/ethernet/intel directory.
This can help us run this tool for every patch, and helps the kernel
code by reducing technical debt.

NOTE: there is one warning left in ixgbe XDP code using rcu_assign_pointer().

* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  ixgbe: reduce checker warnings
  ixgbe: use checker safe conversions
  igbvf: convert to strongly typed descriptors
  intel: call csum functions with well formatted arguments
  igb: override two checker warnings
  igb: fix assignment on big endian machines
  igb: handle vlan types with checker enabled
  igb/igc: use strongly typed pointer
  fm10k: move error check
  intel: remove checker warning
  e100: handle eeprom as little endian
====================

Link: https://lore.kernel.org/r/20210526172346.3515587-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet/appletalk: Fix inconsistent indenting
Jiapeng Chong [Wed, 26 May 2021 10:21:04 +0000 (18:21 +0800)]
net/appletalk: Fix inconsistent indenting

Eliminate the follow smatch warning:

drivers/net/appletalk/ltpc.c:588 idle() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1622024464-29896-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonet: phy: Document phydev::dev_flags bits allocation
Florian Fainelli [Wed, 26 May 2021 18:46:17 +0000 (11:46 -0700)]
net: phy: Document phydev::dev_flags bits allocation

Document the phydev::dev_flags bit allocation to allow bits 15:0 to
define PHY driver specific behavior, bits 23:16 to be reserved for now,
and bits 31:24 to hold generic PHY driver flags.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20210526184617.3105012-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonfc: st-nci: remove unnecessary labels
wengjianfeng [Wed, 26 May 2021 01:16:24 +0000 (09:16 +0800)]
nfc: st-nci: remove unnecessary labels

Some labels are only used once, so we delete them and use the
return statement instead of the goto statement.

Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210526011624.11204-1-samirweng1979@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agonfc: st95hf: remove unnecessary assignment and label
wengjianfeng [Wed, 26 May 2021 00:56:51 +0000 (08:56 +0800)]
nfc: st95hf: remove unnecessary assignment and label

In function st95hf_in_send_cmd, the variable rc is assigned then goto
error label, which just returns rc, so we use return to replace it.
Since error label only used once in the function, so we remove error label.

Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210526005651.12652-1-samirweng1979@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
3 years agoixgbe: reduce checker warnings
Jesse Brandeburg [Fri, 26 Mar 2021 00:38:34 +0000 (17:38 -0700)]
ixgbe: reduce checker warnings

Fix the sparse warnings in the ixgbe crypto offload code. These
changes were made in the most conservative way (force cast)
in order to hopefully not break the code. I suspect that the
code might still be broken on big-endian architectures, but
no one is complaining, so I'm just leaving it functionally
the same.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Shannon Nelson <snelson@pensando.io>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
3 years agoixgbe: use checker safe conversions
Jesse Brandeburg [Fri, 26 Mar 2021 00:38:33 +0000 (17:38 -0700)]
ixgbe: use checker safe conversions

The ixgbe hardware needs some very specific programming for
certain registers, which led to some misguided usage of ntohs
instead of using be16_to_cpu(), as well as a home grown swap
followed by an ntohs. Sparse didn't like this at all, and this
fixes the C=2 build, with code that uses native kernel interface.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
3 years agoigbvf: convert to strongly typed descriptors
Jesse Brandeburg [Fri, 26 Mar 2021 00:38:32 +0000 (17:38 -0700)]
igbvf: convert to strongly typed descriptors

The igbvf driver for some reason never strongly typed it's descriptor
formats. Make this driver like the rest of the Intel drivers and use
__le* for our little endian descriptors.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
3 years agointel: call csum functions with well formatted arguments
Jesse Brandeburg [Fri, 26 Mar 2021 00:38:31 +0000 (17:38 -0700)]
intel: call csum functions with well formatted arguments

The sparse build (C=2) found that there were two drivers
who had not been convered to call the csum_replace_by_diff() function
with sparse clean arguments.  Most if not all drivers force the cast
like this patch does. So these drivers are now joining the party
(a bit late), but with no functional change.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
3 years agoigb: override two checker warnings
Jesse Brandeburg [Fri, 26 Mar 2021 00:38:30 +0000 (17:38 -0700)]
igb: override two checker warnings

The igb PTP code was using htons() on a constant to try to
byte swap the value before writing it to a register. This byte
swap has the consequence of triggering sparse conflicts between
the register write which expect cpu ordered input, and the code
which generated a big endian constant. Just override the cast
to make sure code doesn't change but silence the warning.

Can't do a __swab16 in this case because big endian systems
would then write the wrong value.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
3 years agoigb: fix assignment on big endian machines
Jesse Brandeburg [Fri, 26 Mar 2021 00:38:29 +0000 (17:38 -0700)]
igb: fix assignment on big endian machines

The igb driver was trying hard to be sparse correct, but somehow
ended up converting a variable into little endian order and then
tries to OR something with it.

A much plainer way of doing things is to leave all variables and
OR operations in CPU (non-endian) mode, and then convert to
little endian only once, which is what this change does.

This probably fixes a bug that might have been seen only on
big endian systems.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
3 years agoigb: handle vlan types with checker enabled
Jesse Brandeburg [Fri, 26 Mar 2021 00:38:28 +0000 (17:38 -0700)]
igb: handle vlan types with checker enabled

The sparse build (C=2) finds some issues with how the driver
dealt with the (very difficult) hardware that in some generations
uses little-endian, and in others uses big endian, for the VLAN
field. The code as written picks __le16 as a type and for some
hardware revisions we override it to __be16 as done in this
patch. This impacted the VF driver as well so fix it there too.

Also change the vlan_tci assignment to override the sparse
warning without changing functionality.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
3 years agoigb/igc: use strongly typed pointer
Jesse Brandeburg [Fri, 26 Mar 2021 00:38:27 +0000 (17:38 -0700)]
igb/igc: use strongly typed pointer

The igb and igc driver both use a trick of creating a local type
pointer on the stack to ease dealing with a receive descriptor in
64 bit chunks for printing.  Sparse however was not taken into
account and receive descriptors are always in little endian
order, so just make the unions use __le64 instead of u64.

No functional change.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
3 years agofm10k: move error check
Jesse Brandeburg [Fri, 26 Mar 2021 00:38:26 +0000 (17:38 -0700)]
fm10k: move error check

The error check and set_bit are placed in such a way that sparse (C=2)
warns:
.../fm10k_pci.c:1395:9: warning: context imbalance in 'fm10k_msix_mbx_pf' - different lock contexts for basic block

Which seems a little odd, but the code can obviously be moved
to where the variable is being set without changing functionality
at all, and it even seems to make a bit more sense with the check
closer to the set.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
3 years agointel: remove checker warning
Jesse Brandeburg [Fri, 26 Mar 2021 00:38:25 +0000 (17:38 -0700)]
intel: remove checker warning

The sparse checker (C=2) found an assignment where we were mixing
types when trying to convert from data read directly from the
device NVM, to an array in CPU order in-memory, which
unfortunately the driver tries to do in-place.

This is easily solved by using the swap operation instead of an
assignment, and is already proven in other Intel drivers to be
functionally correct and the same code, just without a sparse
warning.

The change is the same in all three drivers.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
3 years agoe100: handle eeprom as little endian
Jesse Brandeburg [Fri, 26 Mar 2021 00:38:24 +0000 (17:38 -0700)]
e100: handle eeprom as little endian

Sparse tool was warning on some implicit conversions from
little endian data read from the EEPROM on the e100 cards.

Fix these by being explicit about the conversions using
le16_to_cpu().

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
3 years agoMerge tag 'mtd/fixes-for-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 26 May 2021 16:09:23 +0000 (06:09 -1000)]
Merge tag 'mtd/fixes-for-5.13-rc4' of git://git./linux/kernel/git/mtd/linux

Pull MTD fixes from Miquel Raynal:
 "MTD parsers:
   - Fix ofpart subpartitions parsing

  Raw NAND:
   - Fix external use of SW Hamming ECC helper (txx9ndfmc, tmio,
     sharpsl, ndfc, lpc32xx_slc, fsmc, cs553x)"

* tag 'mtd/fixes-for-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: parsers: ofpart: fix parsing subpartitions
  mtd: rawnand: txx9ndfmc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: tmio: Fix external use of SW Hamming ECC helper
  mtd: rawnand: sharpsl: Fix external use of SW Hamming ECC helper
  mtd: rawnand: ndfc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: lpc32xx_slc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: fsmc: Fix external use of SW Hamming ECC helper
  mtd: rawnand: cs553x: Fix external use of SW Hamming ECC helper

3 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
David S. Miller [Tue, 25 May 2021 22:59:24 +0000 (15:59 -0700)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2021-05-26

The following pull-request contains BPF updates for your *net* tree.

We've added 14 non-merge commits during the last 14 day(s) which contain
a total of 17 files changed, 513 insertions(+), 231 deletions(-).

The main changes are:

1) Fix bpf_skb_change_head() helper to reset mac_len, from Jussi Maki.

2) Fix masking direction swap upon off-reg sign change, from Daniel Borkmann.

3) Fix BPF offloads in verifier by reordering driver callback, from Yinjun Zhang.

4) BPF selftest for ringbuf mmap ro/rw restrictions, from Andrii Nakryiko.

5) Follow-up fixes to nested bprintf per-cpu buffers, from Florent Revest.

6) Fix bpftool sock_release attach point help info, from Liu Jian.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'mptcp-fixes'
David S. Miller [Tue, 25 May 2021 22:56:20 +0000 (15:56 -0700)]
Merge branch 'mptcp-fixes'

Mat Martineau says:

====================
MPTCP fixes

Here are a few fixes for the -net tree.

Patch 1 fixes an attempt to access a tcp-specific field that does not
exist in mptcp sockets.

Patches 2 and 3 remove warning/error log output that could be flooded.

Patch 4 performs more validation on address advertisement echo packets
to improve RFC 8684 compliance.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomptcp: validate 'id' when stopping the ADD_ADDR retransmit timer
Davide Caratti [Tue, 25 May 2021 21:23:13 +0000 (14:23 -0700)]
mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer

when Linux receives an echo-ed ADD_ADDR, it checks the IP address against
the list of "announced" addresses. In case of a positive match, the timer
that handles retransmissions is stopped regardless of the 'Address Id' in
the received packet: this behaviour does not comply with RFC8684 3.4.1.

Fix it by validating the 'Address Id' in received echo-ed ADD_ADDRs.
Tested using packetdrill, with the following captured output:

 unpatched kernel:

 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 3013740213], length 0
 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 3013740213], length 0
        ^^^ retransmission is stopped here, but 'Address Id' is 90

 patched kernel:

 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 1672384568], length 0
 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 1672384568], length 0
 Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
 In  <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 198.51.100.2,mptcp dss ack 1672384568], length 0
        ^^^ retransmission is stopped here, only when both 'Address Id' and 'IP Address' match

Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomptcp: avoid error message on infinite mapping
Paolo Abeni [Tue, 25 May 2021 21:23:12 +0000 (14:23 -0700)]
mptcp: avoid error message on infinite mapping

Another left-over. Avoid flooding dmesg with useless text,
we already have a MIB for that event.

Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomptcp: drop unconditional pr_warn on bad opt
Paolo Abeni [Tue, 25 May 2021 21:23:11 +0000 (14:23 -0700)]
mptcp: drop unconditional pr_warn on bad opt

This is a left-over of early day. A malicious peer can flood
the kernel logs with useless messages, just drop it.

Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>