drm/amdkfd: Add heavy-weight TLB flush after unmapping

It is a part of memory mapping optimization.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add flush-type parameter to kfd_flush_tlb

It is to provide more tlb flush types option for different
case scenario.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use drm_dbg_kms for reporting failure to get a GEM FB

drm_err meant broken user space could spam dmesg.

Fixes: f258907fdd835e "drm/amdgpu: Verify bo size can fit framebuffer size on init."
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch kzalloc to kvzalloc in amdgpu_bo_create

It will cause error when alloc memory larger than 128KB in
amdgpu_bo_create->kzalloc. So it needs to switch kzalloc to kvzalloc.

Call Trace:
   alloc_pages_current+0x6a/0xe0
   kmalloc_order+0x32/0xb0
   kmalloc_order_trace+0x1e/0x80
   __kmalloc+0x249/0x2d0
   amdgpu_bo_create+0x102/0x500 [amdgpu]
   ? xas_create+0x264/0x3e0
   amdgpu_bo_create_vm+0x32/0x60 [amdgpu]
   amdgpu_vm_pt_create+0xf5/0x260 [amdgpu]
   amdgpu_vm_init+0x1fd/0x4d0 [amdgpu]

Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: soc15 register access through RLC should only apply to sriov runtime

On SRIOV, driver should only access register through RLC in runtime

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: attr to control SS2.0 bias level (v2)

add sysfs attr to read/write smartshift bias level.
document smartshift_bias sysfs attr.

V2: add attr to amdgpu_device_attrs and use attr_update (Lijo)

Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: sysfs attrs to read ss powershare (v6)

add sysfs attrs to read smartshift APU and DGPU power share.
document the sysfs device attributes.

V2: change variable/macro name for stapm power limit (Lijo)
V3: files to be exposed as sysfs device attributes (Alex)
V4: check ret value of sysfs create and remove only if created.
V5: add ss attrs in amdgpu_device_attrs and use attr_update (Lijo)
V6: all checks for ss support to be in if else if statements. (Lijo)

Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix uninitialized field when expanding macro MI_DCE12_MASK_SH_LIST

Add back.

Fixes: 0cadcf7c100161 ("drm/amd/display/dc/dce/dce_mem_input: Remove duplicate initialisation of GRPH_CONTROL__GRPH_NUM_BANKS_{SHIFT, MASK}")
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'amd-drm-next-5.14-2021-06-02' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.14-2021-06-02:

amdgpu:
- GC/MM register access macro clean up for SR-IOV
- Beige Goby updates
- W=1 Fixes
- Aldebaran fixes
- Misc display fixes
- ACPI ATCS/ATIF handling rework
- SR-IOV fixes
- RAS fixes
- 16bpc fixed point format support
- Initial smartshift support
- RV/PCO power tuning fixes for suspend/resume
- More buffer object subclassing work
- Add new INFO query for additional vbios information
- Add new placement for preemptable SG buffers

amdkfd:
- Misc fixes

radeon:
- W=1 Fixes
- Misc cleanups

UAPI:
- Add new INFO query for additional vbios information
  Useful for debugging vbios related issues.  Proposed umr patch:
  https://patchwork.freedesktop.org/patch/433297/
- 16bpc fixed point format support
  IGT test:
  https://lists.freedesktop.org/archives/igt-dev/2021-May/031507.html
  Proposed Vulkan patch:
  https://github.com/kleinerm/pal/commit/a25d4802074b13a8d5f7edc96ae45469ecbac3c4
- Add a new GEM flag which is only used internally in the kernel driver.  Userspace
  is not allowed to set it.

drm:
- 16bpc fixed point format fourcc

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602214009.4553-1-alexander.deucher@amd.com

Merge tag 'drm-intel-gt-next-2021-05-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

UAPI Changes:
- Add reworked uAPI for DG1 behind CONFIG_BROKEN (Matt A, Abdiel)

Driver Changes:

- Fix for Gitlab issues #3293 and #3450:
  Avoid kernel crash on older L-shape memory machines

- Add Wa_14010733141 (VDBox SFC reset) for Gen11+ (Aditya)
- Fix crash in auto_retire active retire callback due to
  misalignment (Stephane)
- Fix overlay active retire callback alignment (Tvrtko)
- Eliminate need to align active retire callbacks (Matt A, Ville,
  Daniel)
- Program FF_MODE2 tuning value for all Gen12 platforms (Caz)
- Add Wa_14011060649 for TGL,RKL,DG1 and ADLS (Swathi)
- Create stolen memory region from local memory on DG1 (CQ)
- Place PD in LMEM on dGFX (Matt A)
- Use WC when default state object is allocated in LMEM (Venkata)
- Determine the coherent map type based on object location (Venkata)
- Use lmem physical addresses for fb_mmap() on discrete (Mohammed)
- Bypass aperture on fbdev when LMEM is available (Anusha)
- Return error value when displayable BO not in LMEM for dGFX (Mohammed)
- Do release kernel context if breadcrumb measure fails (Janusz)
- Hide modparams for compiled-out features (Tvrtko)
- Apply Wa_22010271021 for all Gen11 platforms (Caz)
- Fix unlikely ref count race in arming the watchdog timer (Tvrtko)
- Check actual RC6 enable status in PMU (Tvrtko)
- Fix a double free in gen8_preallocate_top_level_pdp (Lv)
- Use trylock in shrinker for GGTT on BSW VT-d and BXT (Maarten)
- Remove erroneous i915_is_ggtt check for
  I915_GEM_OBJECT_UNBIND_VM_TRYLOCK (Maarten)

- Convert uAPI headers to real kerneldoc (Matt A)
- Clean up kerneldoc warnings headers (Matt A, Maarten)
- Fail driver if LMEM training failed (Matt R)
- Avoid div-by-zero on Gen2 (Ville)
- Read C0DRB3/C1DRB3 as 16 bits again and add _BW suffix (Ville)
- Remove reference to struct drm_device.pdev (Thomas)
- Increase separation between GuC and execlists code (Chris, Matt B)

- Use might_alloc() (Bernard)
- Split DGFX_FEATURES from GEN12_FEATURES (Lucas)
- Deduplicate Wa_22010271021 programming on (Jose)
- Drop duplicate WaDisable4x2SubspanOptimization:hsw (Tvrtko)
- Selftest improvements (Chris, Hsin-Yi, Tvrtko)
- Shuffle around init_memory_region for stolen (Matt)
- Typo fixes (wengjianfeng)

[airlied: fix conflict with fixes in i915_active.c]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YLCbBR22BsQ/dpJB@jlahtine-mobl.ger.corp.intel.com

drm/amdgpu: remove unsafe optimization to drop preamble ib

Take the situation with gfxoff, the optimization may cause
corrupt CE ram contents. In addition emit_cntxcntl callback
has similar optimization which firmware can handle properly
even for power feature.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add vbios info ioctl interface

Add AMDGPU_INFO_VBIOS_INFO subquery id for detailed vbios info.

Provides a way for the user application to get the VBIOS
information without having to parse the binary.
It is useful for the user to be able to display in a simple way the VBIOS
version in their system if they happen to encounter an issue.

V2:
Use numeric serial.
Parse and expose vbios version string.

V3:
Remove redundant data in drm_amdgpu_info_vbios struct.

V4:
64 bit alignment in drm_amdgpu_info_vbios.

v5: squash together all the reverts, etc. (Alex)

Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: bump driver version

For 16bpc display support.

Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>

drm/amdgpu: Remove unneeded semicolon

Remove unneeded semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix warning: ‘update_dsc_caps’ and ‘apply_dsc_policy_for_stream’ defined but not used

Fixes gcc '-Wunused-function' warning:

‘update_dsc_caps’ and ‘apply_dsc_policy_for_stream’ are only used
if 'CONFIG_DRM_AMD_DC_DCN' is defined,

however, it's defined even if 'CONFIG_DRM_AMD_DC_DCN' is not defined.
Thus gcc will report following warning
if 'CONFIG_DRM_AMD_DC_DCN' is not defined:

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5572:13: warning:
‘apply_dsc_policy_for_stream’ defined but not used [-Wunused-function]

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5556:13: warning:
‘update_dsc_caps’ defined but not used [-Wunused-function]

Thus move the definition of ‘update_dsc_caps’ and
‘apply_dsc_policy_for_stream’ inside define macro to fix it.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove the redundant initialization of local variable

Local variable 'i' and 'j' will be initialized in the for loop, so
remove the redundant initialization.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix gcc set but not used warning of variable 'old_plane_state'

define a new macro for_each_new_plane_in_state_reverse to replace
for_each_oldnew_plane_in_state_reverse, so that the unused variable
'old_plane_state' can be removed.

Fix gcc warning:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:10066:26: warning:
 variable ‘old_plane_state’ set but not used [-Wunused-but-set-variable]

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Avoid HDCP over-read and corruption

Instead of reading the desired 5 bytes of the actual target field,
the code was reading 8. This could result in a corrupted value if the
trailing 3 bytes were non-zero, so instead use an appropriately sized
and zero-initialized bounce buffer, and read only 5 bytes before casting
to u64.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu: remove unreachable code

In the function amdgpu_uvd_cs_msg(), every branch in the switch
statement will have a return, so the code below the switch statement
will not be executed.

Eliminate the follow smatch warning:

drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c:845 amdgpu_uvd_cs_msg() warn:
ignoring unreachable code.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amd/display: convert DRM_DEBUG_ATOMIC to drm_dbg_atomic

This allows to tie the log message to a specific DRM device.

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix a bug on flag table_freed

table_freed will be always true when mapping a memory with size
bigger than 2MB. The problem is page table's entries are always
existed, but existing mapping depends on page talbe's bo, so
using a check of page table's bo existed will resolve the issue.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: optimize code about format string in gfx_v10_0_init_microcode()

the memset() and snprintf() is not necessary.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix sdma firmware version error in sriov

Re-adjust the function return order to avoid empty sdma version in the
sriov environment. (read amdgpu_firmware_info)

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable smart shift on dGPU (v5)

enable smart shift on dGPU if it is part of HG system and
the platform supports ATCS method to handle power shift.

V2: avoid psc updates in baco enter and exit (Lijo)
    fix alignment (Shashank)
V3: rebased on unified ATCS handling. (Alex)
V4: check for return value and warn on failed update (Shashank)
    return 0 if device does not support smart shift.  (Lizo)
V5: rebased on ATPX/ATCS structures global (Alex)

Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: flush gart changes after all BO recovery

Don't flush gart changes after recovering each BO instead
do it after recovering all the BOs. Flishing gart also needed
for amdgpu_ttm_alloc_gart().

v4: use containerof to retrieve adev struct.
v3: rename amdgpu_gart_tlb_flush() -> amdgpu_gart_invalidate_tlb().
v2: abstract out gart tlb flushing logic to amdgpu_gart.c

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: do not allocate entries separately

Allocate PD/PT entries while allocating VM BOs and use that
instead of allocating those entries separately.

v2: create a new var for num entries.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unused code

Remove unused code related to shadow BO.

v2: removing shadow bo ptr from base class.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch to amdgpu_bo_vm for vm code

The subclass, amdgpu_bo_vm is intended for PT/PD BOs which are also
shadowed, so switch to amdgpu_bo_vm BO for PT/PD BOs.

v4: update amdgpu_vm_update_funcs to accept amdgpu_bo_vm.
v3: simplify code.
    check also if shadow bo exist instead of checking bo only type.
v2: squash three related patches.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/admgpu: add two shadow BO helper functions

Add amdgpu_bo_add_to_shadow_list() to handle shadow list
additions and amdgpu_bo_shadowed() to check if a BO is shadowed.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move shadow bo validation to VM code

Do the shadow bo validation in the VM code as
VM code knows/owns shadow BOs.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add amdgpu_bo_vm bo type

Add new BO subclass that will be used by amdgpu vm code.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make sure we unpin the UVD BO

Releasing pinned BOs is illegal now. UVD 6 was missing from:
commit 2f40801dc553 ("drm/amdgpu: make sure we unpin the UVD BO")

Fixes: 2f40801dc553 ("drm/amdgpu: make sure we unpin the UVD BO")
Cc: stable@vger.kernel.org
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: retain the fine grain tuning parameters after resume

This patch is to retain the fine grain tuning parameters after resume for
legacy APU, it will cover Raven/Raven2/Picasso.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: WARN_ON cleanups

Use WARN_ON() inside if-condition when possible.

v2: Squash in coding style fix (Alex)

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-misc-next-2021-06-01' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.14:

UAPI Changes:

 * Use DRM driver names for fbdev

Cross-subsystem Changes:

Core Changes:

 * Fix leaked DMA handles

 * Improve documentation around DRM_CLIENT_CAP_*

 * Cleanups

 * dp_mst: Use kHz as link-rate unit during init

 * fourcc: Remove drm_gem_format_name() and drm_format_name_buf

 * gem-cma: Fix mmap for buffers with write combining

 * ttm: Don't override pre-set vm_ops; ttm_bo_mmap() removal and cleanups

Driver Changes:

 * drm/amdgpu: Fix hot unplug during suspend; Implement mmap as GEM object
   function; Use %p4cc format-string modifier; Cleanups

 * drm/bridge: Cdns: Fix PM reference leak, Cleanups; Lt8912b: Fix Coccinelle
   warnings; Fix Kconfig dependencies; Fixes and cleanups

 * drm/hisilicon/kirin: Cleanups

 * drm/nouveau: Implement mmap as GEM object function

 * drm/radeon: Implement mmap as GEM object function

 * drm/rockchip: Remove generic drivers during init; Add scaling for RK3036
   win1; Fix missing registers for RK3066 and 3188; Add alpha support for
   RK3036, RK3066, RK3126 and RK3188; Fixes and cleanups

 * drm/simpledrm: Use %p4cc: format-string modifier

 * drm/vmwgfx: Cleanups

 * fbdev/matrox: Use modern module_init()

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YLZOKiYE6XFmE/MH@linux-uq9g.fritz.box

drm/amd/display: do not dereference on NULL

WARN_ON() will not kill the process so the second WARN_ON()
will try to dereference NULL pointer.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support atcs method powershift (v4)

add support to handle ATCS method for power shift control.
used to communicate dGPU device state to SBIOS.

V2: use defined acpi func for checking psc support (Lijo)
    fix alignment (Shashank)
V3: rebased on unified ATCS handling (Alex)
V4: rebased on ATPX/ATCS structures global (Alex)

Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: use attr_update if the attr has it

use attr_update if its available as part of the attribute.
default_attr_update was used even if attr->attr_update is true.

Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Shashank Sharma <Shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: free the metadata buffer for sg type BOs as well

Since both sg and device type BOs have metadata buffer, free
the buffer in both cases when to destroy BOs

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Nirmoy Das <Nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix metadata_size for ubo ioctl queries

Although the kfd_ioctl_get_dmabuf_info() still fail it will indicate
the caller right metadat_size useful for the same kfd ioctl next time.

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: document minimum kernel version for DRM_CLIENT_CAP_*

The kernel versions including the following commits are referenced:

DRM_CLIENT_CAP_STEREO_3D
61d8e3282541 ("drm: Add a STEREO_3D capability to the SET_CLIENT_CAP ioctl")

DRM_CLIENT_CAP_UNIVERSAL_PLANES
681e7ec73044 ("drm: Allow userspace to ask for universal plane list (v2)")
c7dbc6c9ae5c ("drm: Remove command line guard for universal planes")

DRM_CLIENT_CAP_ATOMIC
88a48e297b3a ("drm: add atomic properties")
8b72ce158cf0 ("drm: Always enable atomic API")

DRM_CLIENT_CAP_ASPECT_RATIO
7595bda2fb43 ("drm: Add DRM client cap for aspect-ratio")

DRM_CLIENT_CAP_WRITEBACK_CONNECTORS
d67b6a206507 ("drm: writeback: Add client capability for exposing writeback connectors")

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/434202/

drm: clarify and linkify DRM_CLIENT_CAP_WRITEBACK_CONNECTORS docs

Make it clear that the client is responsible for enabling ATOMIC
prior to enabling WRITEBACK_CONNECTORS. Linkify the reference to
ATOMIC.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/434200/

drm: reference mode flags in DRM_CLIENT_CAP_* docs

In the docs for DRM_CLIENT_CAP_STEREO_3D and
DRM_CLIENT_CAP_ASPECT_RATIO, reference the DRM_MODE_FLAG_* defines
that get set when the cap is enabled.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/434201/

drm: bridge: cdns-mhdp8546: Fix PM reference leak in

pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210531135622.3348252-1-yukuai3@huawei.com

drm/bridge: lt8912b: Drop unused includes

The Lontium bridge is including legacy header files for GPIO
but not using them. Delete the includes.

Cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Adren Grassein <adrien.grassein@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210529002759.468964-1-linus.walleij@linaro.org

drm/rockchip: vop: add PX30 version info

To reduce memory various Rockchip VOP versions share
common reg structures. However more recent added SoCs not
always have to same futures as the old ones.
Add PX30 missing version info, so all VOP version checks
work correct if needed in the future.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210131125016.10837-1-jbx6244@gmail.com

drm/rockchip: cdn-dp: fix sign extension on an int multiply for a u64 result

The variable bit_per_pix is a u8 and is promoted in the multiplication
to an int type and then sign extended to a u64. If the result of the
int multiplication is greater than 0x7fffffff then the upper 32 bits will
be set to 1 as a result of the sign extension. Avoid this by casting
tu_size_reg to u64 to avoid sign extension and also a potential overflow.

Fixes: 1a0f7ed3abe2 ("drm/rockchip: cdn-dp: add cdn DP support for rk3399")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915162049.36434-1-colin.king@canonical.com

drm/rockchip: lvds: Fix an error handling path

'ret' is know to be 0 a this point. Checking the return value of
'phy_init()' and 'phy_set_mode()' was intended instead.

So add the missing assignments.

Fixes: cca1705c3d89 ("drm/rockchip: lvds: Add PX30 support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/248220d4815dc8c8088cebfab7d6df5f70518438.1619881852.git.christophe.jaillet@wanadoo.fr

drm/rockchip: remove unused function

Fix the following clang warning:

drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c:320:20: warning: unused
function 'dsi_set' [-Wunused-function].

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1618476421-114429-1-git-send-email-jiapeng.chong@linux.alibaba.com

drm/rockchip: dsi: remove extra component_del() call

commit cf6d100dd238 ("drm/rockchip: dsi: add dual mipi support") added
this devcnt field and call to component_del(). However, these both
appear to be erroneous changes left over from an earlier version of the
patch. In the version merged, nothing ever modifies devcnt, meaning
component_del() runs unconditionally and in addition to the
component_del() calls in dw_mipi_dsi_rockchip_host_detach(). The second
call fails to delete anything and produces a warning in dmesg.

If we look at the previous version of the patch[1], however, we see that
it had logic to calculate devcnt and call component_add() in certain
situations. This was removed in v6, and the fact that the deletion code
was not appears to have been an oversight.

[1] https://patchwork.kernel.org/project/dri-devel/patch/20180821140515.22246-8-heiko@sntech.de/

Fixes: cf6d100dd238 ("drm/rockchip: dsi: add dual mipi support")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/201385acb0eeb5dfb037afdc6a94bfbcdab97f99.1618797778.git.tommyhebb@gmail.com

drm/rockchip: dsi: move all lane config except LCDC mux to bind()

When we first enable the DSI encoder, we currently program some per-chip
configuration that we look up in rk3399_chip_data based on the device
tree compatible we match. This data configures various parameters of the
MIPI lanes, including on RK3399 whether DSI1 is slaved to DSI0 in a
dual-mode configuration. It also selects which LCDC (i.e. VOP) to scan
out from.

This causes a problem in RK3399 dual-mode configurations, though: panel
prepare() callbacks run before the encoder gets enabled and expect to be
able to write commands to the DSI bus, but the bus isn't fully
functional until the lane and master/slave configuration have been
programmed. As a result, dual-mode panels (and possibly others too) fail
to turn on when the rockchipdrm driver is initially loaded.

Because the LCDC mux is the only thing we don't know until enable time
(and is the only thing that can ever change), we can actually move most
of the initialization to bind() and get it out of the way early. That's
what this change does. (Rockchip's 4.4 BSP kernel does it in mode_set(),
which also avoids the issue, but bind() seems like the more correct
place to me.)

Tested on a Google Scarlet board (Acer Chromebook Tab 10), which has a
Kingdisplay KD097D04 dual-mode panel. Prior to this change, the panel's
backlight would turn on but no image would appear when initially loading
rockchipdrm. If I kept rockchipdrm loaded and reloaded the panel driver,
it would come on. With this change, the panel successfully turns on
during initial rockchipdrm load as expected.

Fixes: 2d4f7bdafd70 ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver")
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Tested-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/55fe7f3454d8c91dc3837ba5aa741d4a0e67378f.1618797813.git.tommyhebb@gmail.com

drm/rockchip: cdn-dp-core: add MODULE_FIRMWARE macro

The CDP DP component of the rockchip GPU driver requires firmware
so define MODULE_FIRMWARE for rockchip/dptx.bin so the details
are available in the module info.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506092951.515813-1-pbrobinson@gmail.com

drm/rockchip: cdn-dp-core: add missing clk_disable_unprepare() on error in cdn_dp_grf_write()

After calling clk_prepare_enable(), clk_disable_unprepare() need
be called when calling regmap_write() failed.

Fixes: 1a0f7ed3abe2 ("drm/rockchip: cdn-dp: add cdn DP support for rk3399")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519134928.2696617-1-yangyingliang@huawei.com

drm: rockchip: set alpha_en to 0 if it is not used

alpha_en should be set to 0 if it is not used, i.e. to disable alpha
blending if it was enabled before and should be disabled now.

Fixes: 2aae8ed1f390 ("drm/rockchip: Add per-pixel alpha support for the PX30 VOP")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528130554.72191-6-knaerzche@gmail.com

drm: rockchip: add alpha support for RK3036, RK3066, RK3126 and RK3188

With
commit 2aae8ed1f390 ("drm/rockchip: Add per-pixel alpha support for the PX30 VOP")
alpha support was introduced for PX30's VOP.
RK3036, RK3066, RK3126 and RK3188 VOPs support alpha blending in the
same manner.
With the exception of RK3066 all of them support pre-multiplied alpha.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528130554.72191-5-knaerzche@gmail.com

drm: rockchip: add missing registers for RK3066

Add dither_up, dsp_lut_en and data_blank registers to enable their
respective functionality for RK3066's VOP.

While at that also fix .rb_swap and .format registers for all windows,
which have to be set though RK3066_SYS_CTRL1 register.
Also remove .scl from win1: Scaling is only supported on the primary
plane.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528130554.72191-4-knaerzche@gmail.com

drm: rockchip: add missing registers for RK3188

Add dither_up, dsp_lut_en and data_blank registers to enable their
respective functionality for RK3188's VOP.
While at that also fix .dsp_blank register which is (only) set with
BIT24 (same as RK3066)

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528130554.72191-3-knaerzche@gmail.com

drm: rockchip: add scaling for RK3036 win1

Add the registers needed to make scaling work on RK3036's win1.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528130554.72191-2-knaerzche@gmail.com

drm/rockchip: remove existing generic drivers to take over the device

There are drivers that register framebuffer devices very early in the boot
process and make use of the existing framebuffer as setup by the firmware.

If one of those drivers has registered a fbdev, then the fallback fbdev of
the DRM driver won't be bound to the framebuffer console. To avoid that,
remove any existing generic driver and take over the graphics device.

By doing that, the fb mapped to the console is switched correctly from the
early fbdev to the one registered by the rockchip DRM driver:

    [   40.752420] fb0: switching to rockchip-drm-fb from EFI VGA

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210516074833.451643-1-javierm@redhat.com

drm: Fix for GEM buffers with write-combine memory

The previous commit wrongly assumed that dma_mmap_wc() could be replaced
by pgprot_writecombine() + dma_mmap_pages(). It did work on my setup,
but did not work everywhere.

Use dma_mmap_wc() when the buffer has the write-combine cache attribute,
and dma_mmap_pages() when it has the non-coherent cache attribute.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: cf8ccbc72d61 ("drm: Add support for GEM buffers backed by non-coherent memory")
Link: https://patchwork.freedesktop.org/patch/msgid/20210527230334.151947-1-paul@crapouillou.net

drm/dp_mst: Use kHz as link rate units when settig source max link caps at init

[why]
Link rate in kHz is what is eventually required to calculate the link
bandwidth, which makes kHz a more generic unit. This should also make
forward-compatibility with new DP standards easier.

[how]
- Replace 'link rate DPCD code' with 'link rate in kHz' when used with
drm_dp_mst_topology_mgr_init()
- Add/remove related DPCD code conversion from/to kHz where applicable

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512210011.8425-2-nikola.cornij@amd.com

drm/amd/display: Enable support for 16 bpc fixed-point framebuffers.

This is intended to enable direct high-precision scanout and pageflip
of Vulkan swapchain images in format VK_FORMAT_R16G16B16A16_UNORM.

Expose DRM_FORMAT_XRGB16161616, DRM_FORMAT_ARGB16161616,
DRM_FORMAT_XBGR16161616 and DRM_FORMAT_ABGR16161616 as 16 bpc
unsigned normalized formats. These allow to take full advantage
of the maximum precision of the display hardware, ie. currently
up to 12 bpc.

Searching through old AMD M56, M76 and RV630 hw programming docs
suggests that these 16 bpc formats are supported by all DCE and
DCN display engines, so we can expose the formats unconditionally.

Successfully tested on AMD Polaris11 DCE-11.2 an RavenRidge DCN-1.0
with a HDR-10 monitor over 10 bpc DP output with spatial dithering
enabled by the driver. Picture looks good, and my photometer
measurement procedure confirms an effective 12 bpc color
reproduction.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Make assert in DCE's program_bit_depth_reduction more lenient.

This is needed to avoid warnings with linebuffer depth 36 bpp.
Testing on a Polaris11, DCE-11.2 on a 10 bit HDR-10 monitor
showed no obvious problems, and this 12 bpc limit is consistent
with what other function in the DCE bit depth reduction path use.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Increase linebuffer pixel depth to 36bpp.

Testing with the photometer shows that at least Raven Ridge DCN-1.0
does not achieve more than 10 bpc effective output precision with a
16 bpc unorm surface of type SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616,
unless linebuffer depth is increased from LB_PIXEL_DEPTH_30BPP to
LB_PIXEL_DEPTH_36BPP. Otherwise precision gets truncated somewhere
to 10 bpc effective depth.

Strangely this increase was not needed on Polaris11 DCE-11.2 during
testing to get 12 bpc effective precision. It also is not needed for
fp16 framebuffers.

Tested on DCN-1.0 and DCE-11.2.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add support for SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616.

Add the necessary format definition, bandwidth and pixel size mappings,
prescaler setup, and pixelformat selection, following the logic
already present for SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616.

The new SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616 is implemented as the
old SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616 format, but with swapped
red <-> green color channel, by use of the hardware xbar.

Please note that on the DCN 1/2/3 display engines, the pixelformat
in hubp and dpp setup for the old SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616
and the new SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616 was changed from
format id 22 to id 26. See amd/include/navi10_enum.h for the meaning
of the id's.

For format 22, the display engine read the framebuffer in 16 bpc format,
but truncated to the 12 bpc actually supported by later pipeline stages.
However, the engine took the 12 LSB of each color component for
truncation, which is incompatible with rendering at least under Vulkan,
where content is 16 bit wide, and a 12 MSB alignment would be appropriate,
if any. Format 20 for ARGB16161616_12MSB does work, but even better, we
can choose format 26 for ARGB16161616_UNORM, keeping all 16 bits around
until later stages of the display pipeline.

This allows to directly consume what the rendering hw produces under
Vulkan for swapchain format VK_FORMAT_R16G16B16A16_UNORM, as tested
with a patched version of the current AMD open-source amdvlk driver
which maps swapchain format VK_FORMAT_R16G16B16A16_UNORM onto
DRM_FORMAT_XBGR16161616.

The old id 22 would cause colorful pixeltrash to be displayed instead.

Tested under DCN-1.0 and DCE-11.2.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/fourcc: Add 16 bpc fixed point framebuffer formats.

These are 16 bits per color channel unsigned normalized formats.
They are supported by at least AMD display hw, and suitable for
direct scanout of Vulkan swapchain images in the format
VK_FORMAT_R16G16B16A16_UNORM.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915: Add Wa_14010733141

The WA requires the following procedure for VDBox SFC reset:

If (MFX-SFC usage is 1) {
1.Issue a MFX-SFC forced lock
2.Wait for MFX-SFC forced lock ack
3.Check the MFX-SFC usage bit
If (MFX-SFC usage bit is 1)
Reset VDBOX and SFC
else
Reset VDBOX
Release the force lock MFX-SFC
}
else if(HCP+SFC usage is 1) {
1.Issue a VE-SFC forced lock
2.Wait for SFC forced lock ack
3.Check the VE-SFC usage bit
If (VE-SFC usage bit is 1)
Reset VDBOX
else
Reset VDBOX and SFC
Release the force lock VE-SFC.
}
else
Reset VDBOX

- Restructure: the changes to the original code flow should stay
  relatively minimal; we only need to do an extra HCP check after the
  usual VD-MFX check and, if true, switch the register/bit we're
  performing the lock on.(MattR)

v2:
- Assign unlock mask using paired_engine->mask instead of using
  BIT(paired_vecs->id). (Daniele)

Bspec: 52890, 53509

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526094852.286424-2-aditya.swarup@intel.com

drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)

They are global ACPI methods, so maybe the structures
global in the driver. This simplified a number of things
in the handling of these methods.

v2: reset the handle if verify interface fails (Lijo)
v3: fix compilation when ACPI is not defined.

Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu:save psp ring wptr to avoid attack

[Why]
When some tools performing psp mailbox attack, the readback value
of register can be a random value which may break psp.

[How]
Use a psp wptr cache machanism to aovid the change made by attack.

v2: unify change and add detailed reason

Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/swsmu/aldebaran: fix check in is_dpm_running

If smu_cmn_get_enabled_mask() fails, return false to be
consistent with other asics.

Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Lee Jones <lee.jones@linaro.org>

drm/amd/display/modules/hdcp/hdcp_psp: Remove unused function 'mod_hdcp_hdcp1_get_link_encryption_status()'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../display/modules/hdcp/hdcp_psp.c:374:22: warning: no previous prototype for ‘mod_hdcp_hdcp1_get_link_encryption_status’ [-Wmissing-prototypes]

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/dmub/src/dmub_srv_stat: Convert function header to kernel-doc

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../display/dmub/src/dmub_srv_stat.c:38: warning: Cannot understand  *****************************************************************************

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jun Lei <Jun.Lei@amd.com>
Cc: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/dc/core/dc: Convert function headers to kernel-doc

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3324: warning: Cannot understand  *****************************************************************************
 drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3344: warning: Cannot understand  *****************************************************************************
 drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:3417: warning: Cannot understand  *****************************************************************************

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/dc/dce110/dce110_hw_sequencer: Include header containing our prototypes

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:929:6: warning: no previous prototype for ‘dce110_edp_wait_for_T12’ [-Wmissing-prototypes]

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/amdgpu_dm/amdgpu_dm: Fix kernel-doc formatting issue

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:608: warning: Function parameter or member 'interrupt_params' not described in 'dm_dcn_vertical_interrupt0_high_irq'

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu/amdgpu_device: Make local function static

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:4624:6: warning: no previous prototype for ‘amdgpu_device_recheck_guilty_jobs’ [-Wmissing-prototypes]

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/dc/dce/dce_mem_input: Remove duplicate initialisation of GRPH_CONTROL__GRPH_NUM_BANKS_{SHIFT, MASK

Fixes the following W=1 kernel build warning(s):

 In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:29:
 drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_sh_mask.h:7270:45: warning: initialized field overwritten [-Woverride-init]
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS__SHIFT’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:159:2: note: in expansion of macro ‘SFB’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:264:2: note: in expansion of macro ‘MI_GFX6_TILE_MASK_SH_LIST’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:657:3: note: in expansion of macro ‘MI_DCE6_MASK_SH_LIST’
 drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_sh_mask.h:7270:45: note: (near initialization for ‘mi_shifts.GRPH_NUM_BANKS’)
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS__SHIFT’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:159:2: note: in expansion of macro ‘SFB’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:264:2: note: in expansion of macro ‘MI_GFX6_TILE_MASK_SH_LIST’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:657:3: note: in expansion of macro ‘MI_DCE6_MASK_SH_LIST’
 drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_sh_mask.h:7269:43: warning: initialized field overwritten [-Woverride-init]
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS_MASK’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:159:2: note: in expansion of macro ‘SFB’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:264:2: note: in expansion of macro ‘MI_GFX6_TILE_MASK_SH_LIST’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:662:3: note: in expansion of macro ‘MI_DCE6_MASK_SH_LIST’
 drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_sh_mask.h:7269:43: note: (near initialization for ‘mi_masks.GRPH_NUM_BANKS’)
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS_MASK’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:159:2: note: in expansion of macro ‘SFB’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:264:2: note: in expansion of macro ‘MI_GFX6_TILE_MASK_SH_LIST’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:662:3: note: in expansion of macro ‘MI_DCE6_MASK_SH_LIST’

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/dc/dce/dce_mem_input: Remove duplicate initialisation of GRPH_CONTROL__GRPH_NUM_BANKS_{SHIFT, MASK}

Fixes the following W=1 kernel build warning(s):

 In file included from drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:29:
 drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_sh_mask.h:7270:45: warning: initialized field overwritten [-Woverride-init]
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS__SHIFT’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:159:2: note: in expansion of macro ‘SFB’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:265:2: note: in expansion of macro ‘MI_GFX6_TILE_MASK_SH_LIST’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:657:3: note: in expansion of macro ‘MI_DCE6_MASK_SH_LIST’
 drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_sh_mask.h:7270:45: note: (near initialization for ‘mi_shifts.GRPH_NUM_BANKS’)
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS__SHIFT’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:159:2: note: in expansion of macro ‘SFB’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:265:2: note: in expansion of macro ‘MI_GFX6_TILE_MASK_SH_LIST’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:657:3: note: in expansion of macro ‘MI_DCE6_MASK_SH_LIST’
 drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_sh_mask.h:7269:43: warning: initialized field overwritten [-Woverride-init]
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS_MASK’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:159:2: note: in expansion of macro ‘SFB’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:265:2: note: in expansion of macro ‘MI_GFX6_TILE_MASK_SH_LIST’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:662:3: note: in expansion of macro ‘MI_DCE6_MASK_SH_LIST’
 drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_sh_mask.h:7269:43: note: (near initialization for ‘mi_masks.GRPH_NUM_BANKS’)
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:155:28: note: in expansion of macro ‘GRPH_CONTROL__GRPH_NUM_BANKS_MASK’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:159:2: note: in expansion of macro ‘SFB’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_mem_input.h:265:2: note: in expansion of macro ‘MI_GFX6_TILE_MASK_SH_LIST’
 drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:662:3: note: in expansion of macro ‘MI_DCE6_MASK_SH_LIST’

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/dc/dce110/dce110_hw_sequencer: Include our own header

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../display/dc/dce110/dce110_hw_sequencer.c:927:6: warning: no previous prototype for ‘dce110_edp_wait_for_T12’ [-Wmissing-prototypes]

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/dc/gpio/gpio_service: Pass around correct dce_{version, environment} types

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../display/dc/gpio/gpio_service.c: In function ‘dal_gpio_service_create’:
 drivers/gpu/drm/amd/amdgpu/../display/dc/gpio/gpio_service.c:71:4: warning: implicit conversion from ‘enum dce_version’ to ‘enum dce_environment’ [-Wenum-conversion]
 drivers/gpu/drm/amd/amdgpu/../display/dc/gpio/gpio_service.c:77:4: warning: implicit conversion from ‘enum dce_version’ to ‘enum dce_environment’ [-Wenum-conversion]

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/dc/dce/dmub_outbox: Convert over to kernel-doc

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_outbox.c:30: warning: Cannot understand  *****************************************************************************

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Cc: Jun Lei <Jun.Lei@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/amdgpu_dm/amdgpu_dm: Functions must directly follow their headers

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:608: warning: Function parameter or member 'interrupt_params' not described in 'dm_dcn_vertical_interrupt0_high_irq'

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/dc/bios/bios_parser: Fix formatting and misnaming issues

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:997: warning: expecting prototype for get_ss_info_from_table(). Prototype was for get_ss_info_from_tbl() instead
 drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1562: warning: expecting prototype for BiosParserObject(). Prototype was for bios_parser_get_ss_entry_number() instead
 drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser.c:1739: warning: expecting prototype for get_ss_entry_number_from_internal_ss_info_table_V3_1(). Prototype was for get_ss_entry_number_from_internal_ss_info_tbl_V3_1() instead

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/dc/bios/command_table_helper2: Fix function name 'dal_cmd_table_helper_transmitter_bp_to_atom2()'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../display/dc/bios/command_table_helper2.c:141: warning: expecting prototype for translate_transmitter_bp_to_atom2(). Prototype was for dal_cmd_table_helper_transmitter_bp_to_atom2() instead

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display/dc/bios/command_table_helper: Fix function name for 'dal_cmd_table_helper_transmitter_bp_to_atom()'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../display/dc/bios/command_table_helper.c:127: warning: expecting prototype for translate_transmitter_bp_to_atom(). Prototype was for dal_cmd_table_helper_transmitter_bp_to_atom() instead

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm/powerplay/hwmgr/vega20_hwmgr: Provide function name 'vega20_init_smc_table()'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega20_hwmgr.c:781: warning: expecting prototype for Initializes the SMC table and uploads it(). Prototype was for vega20_init_smc_table() instead

Cc: Evan Quan <evan.quan@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm/powerplay/hwmgr/vega10_hwmgr: Kernel-doc headers must contain function names

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_hwmgr.c:547: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_hwmgr.c:603: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_hwmgr.c:629: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_hwmgr.c:1006: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_hwmgr.c:1155: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_hwmgr.c:1608: warning: expecting prototype for Populates single SMC GFXSCLK structure using the provided engine clock(). Prototype was for vega10_populate_single_gfx_level() instead
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_hwmgr.c:1663: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_hwmgr.c:1713: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_hwmgr.c:1862: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_hwmgr.c:2546: warning: expecting prototype for Initializes the SMC table and uploads it(). Prototype was for vega10_init_smc_table() instead
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_hwmgr.c:2922: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Cc: Evan Quan <evan.quan@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm/powerplay/hwmgr/vega12_hwmgr: Provide 'vega12_init_smc_table()' function name

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega12_hwmgr.c:812: warning: expecting prototype for Initializes the SMC table and uploads it(). Prototype was for vega12_init_smc_table() instead

Cc: Evan Quan <evan.quan@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm/powerplay/hwmgr/vega12_thermal: Provide function name

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega12_thermal.c:171: warning: expecting prototype for Set the requested temperature range for high and low alert signals(). Prototype was for vega12_thermal_set_temperature_range() instead

Cc: Evan Quan <evan.quan@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm/powerplay/hwmgr/smu7_thermal: Provide function name for 'smu7_fan_ctrl_set_default_mode()'

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:132: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Cc: Evan Quan <evan.quan@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm/inc/smu_v13_0: Move table into the only source file that uses it

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../pm/inc/smu_v13_0.h:54:43: warning: ‘smu13_thermal_policy’ defined but not used [-Wunused-const-variable=]

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kevin Wang <kevin1.wang@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/acpi: fix typo in ATCS handling

Path should be NULL when we already have the handle
to the object.

Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Tested-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Refactor and add visual confirm for HW Flip Queue"

This reverts commit 3ca402375a2197579d1029e7fa9d856847fe0e7b.

Recent visual confirm changes are regressing the driver, causing a
black screen on boot in some green sardine configs, or visual confirm
is not updated at all.

Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.137

DC version 3.2.137 brings improvements in multiple areas.
In summary, we highlight:

- Updates on DP configurations and clock recovery API
- Improvements on DSC, link training sequence, etc.
- Fixes on memory leak, ODM scaling, etc.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix odm scaling

There are two issues with scaling calculations, odm recout
calculation and matching viewport to actual recout.

This change fixes both issues. Odm recout calculation via
special casing and viewport matching issue by reworking
the viewport calcualtion to use scaling ratios and recout
to derrive the required offset and size.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor SST DSC Determination Policy

[Why & How]
SST dsc determination policy becomes bigger when more scenarios
are introduced. Take it out to make it clean and readable.

Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Log for SST DSC Determination Policy

[Why & How]
To facilitate DSC debugging purpose

Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: isolate 8b 10b link training sequence into its own function

[how]
1. move 8b 10 link trianing into its own function
2. make link status check after a link success link as part of
dp transition to video idle sequence.

Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add exit training mode and update channel coding in LT

[why]
As recommended by DP specs, source needs to make sure
DPRX exits previous LT mode before configuring new LT params
Nofity what channel coding mode we will use for current link training.

Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Implement INBOX0 usage in driver

[Why]
Start using INBOX0 for HW Lock command

[How]
- Implement initial interface for INBOX0 HW lock message

Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>