The "#address-cells" and "#size-cells" are required only when the I2C
controller has subnodes. However, some I2C controllers defined in
"arch/arm64/boot/dts/amd/" and "arch/arm64/boot/dts/hisilicon/"
directories do not have child nodes. So they don't need these two
properties and don't write them explicitly.
Therefore, setting properties "#address-cells" and "#size-cells" as
"required" in this yaml file causes the following warnings:
/root/linux-next/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dt.yaml: \
i2c@
f7100000: '#address-cells' is a required property
/root/linux-next/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dt.yaml: \
i2c@
f7100000: '#size-cells' is a required property
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20201214124347.2120-2-thunder.leizhen@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
required:
- compatible
- reg
- - "#address-cells"
- - "#size-cells"
- interrupts
examples:
i2c@f0000 {
compatible = "snps,designware-i2c";
reg = <0xf0000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
interrupts = <11>;
clock-frequency = <400000>;
};
i2c@1120000 {
compatible = "snps,designware-i2c";
reg = <0x1120000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
interrupts = <12 1>;
clock-frequency = <400000>;
i2c-sda-hold-time-ns = <300>;
reg = <0x100400 0x100>, <0x198 0x8>;
pinctrl-0 = <&i2c_pins>;
pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
interrupts = <8>;
clocks = <&ahb_clk>;
};