2 * (C) 2001, 2002, 2003, 2004 Rusty Russell
4 * This code is licenced under the GPL.
6 #include <linux/proc_fs.h>
8 #include <linux/init.h>
9 #include <linux/notifier.h>
10 #include <linux/sched/signal.h>
11 #include <linux/sched/hotplug.h>
12 #include <linux/sched/isolation.h>
13 #include <linux/sched/task.h>
14 #include <linux/sched/smt.h>
15 #include <linux/unistd.h>
16 #include <linux/cpu.h>
17 #include <linux/oom.h>
18 #include <linux/rcupdate.h>
19 #include <linux/export.h>
20 #include <linux/bug.h>
21 #include <linux/kthread.h>
22 #include <linux/stop_machine.h>
23 #include <linux/mutex.h>
24 #include <linux/gfp.h>
25 #include <linux/suspend.h>
26 #include <linux/lockdep.h>
27 #include <linux/tick.h>
28 #include <linux/irq.h>
29 #include <linux/nmi.h>
30 #include <linux/smpboot.h>
31 #include <linux/relay.h>
32 #include <linux/slab.h>
33 #include <linux/percpu-rwsem.h>
35 #include <trace/events/power.h>
36 #define CREATE_TRACE_POINTS
37 #include <trace/events/cpuhp.h>
42 * cpuhp_cpu_state - Per cpu hotplug state storage
43 * @state: The current cpu state
44 * @target: The target state
45 * @thread: Pointer to the hotplug thread
46 * @should_run: Thread should execute
47 * @rollback: Perform a rollback
48 * @single: Single callback invocation
49 * @bringup: Single callback bringup or teardown selector
50 * @cb_state: The state for a single callback (install/uninstall)
51 * @result: Result of the operation
52 * @done_up: Signal completion to the issuer of the task for cpu-up
53 * @done_down: Signal completion to the issuer of the task for cpu-down
55 struct cpuhp_cpu_state {
56 enum cpuhp_state state;
57 enum cpuhp_state target;
58 enum cpuhp_state fail;
60 struct task_struct *thread;
66 struct hlist_node *node;
67 struct hlist_node *last;
68 enum cpuhp_state cb_state;
70 struct completion done_up;
71 struct completion done_down;
75 static DEFINE_PER_CPU(struct cpuhp_cpu_state, cpuhp_state) = {
76 .fail = CPUHP_INVALID,
79 #if defined(CONFIG_LOCKDEP) && defined(CONFIG_SMP)
80 static struct lockdep_map cpuhp_state_up_map =
81 STATIC_LOCKDEP_MAP_INIT("cpuhp_state-up", &cpuhp_state_up_map);
82 static struct lockdep_map cpuhp_state_down_map =
83 STATIC_LOCKDEP_MAP_INIT("cpuhp_state-down", &cpuhp_state_down_map);
86 static inline void cpuhp_lock_acquire(bool bringup)
88 lock_map_acquire(bringup ? &cpuhp_state_up_map : &cpuhp_state_down_map);
91 static inline void cpuhp_lock_release(bool bringup)
93 lock_map_release(bringup ? &cpuhp_state_up_map : &cpuhp_state_down_map);
97 static inline void cpuhp_lock_acquire(bool bringup) { }
98 static inline void cpuhp_lock_release(bool bringup) { }
103 * cpuhp_step - Hotplug state machine step
104 * @name: Name of the step
105 * @startup: Startup function of the step
106 * @teardown: Teardown function of the step
107 * @cant_stop: Bringup/teardown can't be stopped at this step
112 int (*single)(unsigned int cpu);
113 int (*multi)(unsigned int cpu,
114 struct hlist_node *node);
117 int (*single)(unsigned int cpu);
118 int (*multi)(unsigned int cpu,
119 struct hlist_node *node);
121 struct hlist_head list;
126 static DEFINE_MUTEX(cpuhp_state_mutex);
127 static struct cpuhp_step cpuhp_hp_states[];
129 static struct cpuhp_step *cpuhp_get_step(enum cpuhp_state state)
131 return cpuhp_hp_states + state;
135 * cpuhp_invoke_callback _ Invoke the callbacks for a given state
136 * @cpu: The cpu for which the callback should be invoked
137 * @state: The state to do callbacks for
138 * @bringup: True if the bringup callback should be invoked
139 * @node: For multi-instance, do a single entry callback for install/remove
140 * @lastp: For multi-instance rollback, remember how far we got
142 * Called from cpu hotplug and from the state register machinery.
144 static int cpuhp_invoke_callback(unsigned int cpu, enum cpuhp_state state,
145 bool bringup, struct hlist_node *node,
146 struct hlist_node **lastp)
148 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
149 struct cpuhp_step *step = cpuhp_get_step(state);
150 int (*cbm)(unsigned int cpu, struct hlist_node *node);
151 int (*cb)(unsigned int cpu);
154 if (st->fail == state) {
155 st->fail = CPUHP_INVALID;
157 if (!(bringup ? step->startup.single : step->teardown.single))
163 if (!step->multi_instance) {
164 WARN_ON_ONCE(lastp && *lastp);
165 cb = bringup ? step->startup.single : step->teardown.single;
168 trace_cpuhp_enter(cpu, st->target, state, cb);
170 trace_cpuhp_exit(cpu, st->state, state, ret);
173 cbm = bringup ? step->startup.multi : step->teardown.multi;
177 /* Single invocation for instance add/remove */
179 WARN_ON_ONCE(lastp && *lastp);
180 trace_cpuhp_multi_enter(cpu, st->target, state, cbm, node);
181 ret = cbm(cpu, node);
182 trace_cpuhp_exit(cpu, st->state, state, ret);
186 /* State transition. Invoke on all instances */
188 hlist_for_each(node, &step->list) {
189 if (lastp && node == *lastp)
192 trace_cpuhp_multi_enter(cpu, st->target, state, cbm, node);
193 ret = cbm(cpu, node);
194 trace_cpuhp_exit(cpu, st->state, state, ret);
208 /* Rollback the instances if one failed */
209 cbm = !bringup ? step->startup.multi : step->teardown.multi;
213 hlist_for_each(node, &step->list) {
217 trace_cpuhp_multi_enter(cpu, st->target, state, cbm, node);
218 ret = cbm(cpu, node);
219 trace_cpuhp_exit(cpu, st->state, state, ret);
221 * Rollback must not fail,
229 static bool cpuhp_is_ap_state(enum cpuhp_state state)
232 * The extra check for CPUHP_TEARDOWN_CPU is only for documentation
233 * purposes as that state is handled explicitly in cpu_down.
235 return state > CPUHP_BRINGUP_CPU && state != CPUHP_TEARDOWN_CPU;
238 static inline void wait_for_ap_thread(struct cpuhp_cpu_state *st, bool bringup)
240 struct completion *done = bringup ? &st->done_up : &st->done_down;
241 wait_for_completion(done);
244 static inline void complete_ap_thread(struct cpuhp_cpu_state *st, bool bringup)
246 struct completion *done = bringup ? &st->done_up : &st->done_down;
251 * The former STARTING/DYING states, ran with IRQs disabled and must not fail.
253 static bool cpuhp_is_atomic_state(enum cpuhp_state state)
255 return CPUHP_AP_IDLE_DEAD <= state && state < CPUHP_AP_ONLINE;
258 /* Serializes the updates to cpu_online_mask, cpu_present_mask */
259 static DEFINE_MUTEX(cpu_add_remove_lock);
260 bool cpuhp_tasks_frozen;
261 EXPORT_SYMBOL_GPL(cpuhp_tasks_frozen);
264 * The following two APIs (cpu_maps_update_begin/done) must be used when
265 * attempting to serialize the updates to cpu_online_mask & cpu_present_mask.
267 void cpu_maps_update_begin(void)
269 mutex_lock(&cpu_add_remove_lock);
272 void cpu_maps_update_done(void)
274 mutex_unlock(&cpu_add_remove_lock);
278 * If set, cpu_up and cpu_down will return -EBUSY and do nothing.
279 * Should always be manipulated under cpu_add_remove_lock
281 static int cpu_hotplug_disabled;
283 #ifdef CONFIG_HOTPLUG_CPU
285 DEFINE_STATIC_PERCPU_RWSEM(cpu_hotplug_lock);
287 void cpus_read_lock(void)
289 percpu_down_read(&cpu_hotplug_lock);
291 EXPORT_SYMBOL_GPL(cpus_read_lock);
293 int cpus_read_trylock(void)
295 return percpu_down_read_trylock(&cpu_hotplug_lock);
297 EXPORT_SYMBOL_GPL(cpus_read_trylock);
299 void cpus_read_unlock(void)
301 percpu_up_read(&cpu_hotplug_lock);
303 EXPORT_SYMBOL_GPL(cpus_read_unlock);
305 void cpus_write_lock(void)
307 percpu_down_write(&cpu_hotplug_lock);
310 void cpus_write_unlock(void)
312 percpu_up_write(&cpu_hotplug_lock);
315 void lockdep_assert_cpus_held(void)
318 * We can't have hotplug operations before userspace starts running,
319 * and some init codepaths will knowingly not take the hotplug lock.
320 * This is all valid, so mute lockdep until it makes sense to report
323 if (system_state < SYSTEM_RUNNING)
326 percpu_rwsem_assert_held(&cpu_hotplug_lock);
329 static void lockdep_acquire_cpus_lock(void)
331 rwsem_acquire(&cpu_hotplug_lock.rw_sem.dep_map, 0, 0, _THIS_IP_);
334 static void lockdep_release_cpus_lock(void)
336 rwsem_release(&cpu_hotplug_lock.rw_sem.dep_map, 1, _THIS_IP_);
340 * Wait for currently running CPU hotplug operations to complete (if any) and
341 * disable future CPU hotplug (from sysfs). The 'cpu_add_remove_lock' protects
342 * the 'cpu_hotplug_disabled' flag. The same lock is also acquired by the
343 * hotplug path before performing hotplug operations. So acquiring that lock
344 * guarantees mutual exclusion from any currently running hotplug operations.
346 void cpu_hotplug_disable(void)
348 cpu_maps_update_begin();
349 cpu_hotplug_disabled++;
350 cpu_maps_update_done();
352 EXPORT_SYMBOL_GPL(cpu_hotplug_disable);
354 static void __cpu_hotplug_enable(void)
356 if (WARN_ONCE(!cpu_hotplug_disabled, "Unbalanced cpu hotplug enable\n"))
358 cpu_hotplug_disabled--;
361 void cpu_hotplug_enable(void)
363 cpu_maps_update_begin();
364 __cpu_hotplug_enable();
365 cpu_maps_update_done();
367 EXPORT_SYMBOL_GPL(cpu_hotplug_enable);
371 static void lockdep_acquire_cpus_lock(void)
375 static void lockdep_release_cpus_lock(void)
379 #endif /* CONFIG_HOTPLUG_CPU */
382 * Architectures that need SMT-specific errata handling during SMT hotplug
383 * should override this.
385 void __weak arch_smt_update(void) { }
387 #ifdef CONFIG_HOTPLUG_SMT
388 enum cpuhp_smt_control cpu_smt_control __read_mostly = CPU_SMT_ENABLED;
390 void __init cpu_smt_disable(bool force)
392 if (cpu_smt_control == CPU_SMT_FORCE_DISABLED ||
393 cpu_smt_control == CPU_SMT_NOT_SUPPORTED)
397 pr_info("SMT: Force disabled\n");
398 cpu_smt_control = CPU_SMT_FORCE_DISABLED;
400 pr_info("SMT: disabled\n");
401 cpu_smt_control = CPU_SMT_DISABLED;
406 * The decision whether SMT is supported can only be done after the full
407 * CPU identification. Called from architecture code.
409 void __init cpu_smt_check_topology(void)
411 if (!topology_smt_supported())
412 cpu_smt_control = CPU_SMT_NOT_SUPPORTED;
415 static int __init smt_cmdline_disable(char *str)
417 cpu_smt_disable(str && !strcmp(str, "force"));
420 early_param("nosmt", smt_cmdline_disable);
422 static inline bool cpu_smt_allowed(unsigned int cpu)
424 if (cpu_smt_control == CPU_SMT_ENABLED)
427 if (topology_is_primary_thread(cpu))
431 * On x86 it's required to boot all logical CPUs at least once so
432 * that the init code can get a chance to set CR4.MCE on each
433 * CPU. Otherwise, a broadacasted MCE observing CR4.MCE=0b on any
434 * core will shutdown the machine.
436 return !per_cpu(cpuhp_state, cpu).booted_once;
439 static inline bool cpu_smt_allowed(unsigned int cpu) { return true; }
442 static inline enum cpuhp_state
443 cpuhp_set_state(struct cpuhp_cpu_state *st, enum cpuhp_state target)
445 enum cpuhp_state prev_state = st->state;
447 st->rollback = false;
452 st->bringup = st->state < target;
458 cpuhp_reset_state(struct cpuhp_cpu_state *st, enum cpuhp_state prev_state)
463 * If we have st->last we need to undo partial multi_instance of this
464 * state first. Otherwise start undo at the previous state.
473 st->target = prev_state;
474 st->bringup = !st->bringup;
477 /* Regular hotplug invocation of the AP hotplug thread */
478 static void __cpuhp_kick_ap(struct cpuhp_cpu_state *st)
480 if (!st->single && st->state == st->target)
485 * Make sure the above stores are visible before should_run becomes
486 * true. Paired with the mb() above in cpuhp_thread_fun()
489 st->should_run = true;
490 wake_up_process(st->thread);
491 wait_for_ap_thread(st, st->bringup);
494 static int cpuhp_kick_ap(struct cpuhp_cpu_state *st, enum cpuhp_state target)
496 enum cpuhp_state prev_state;
499 prev_state = cpuhp_set_state(st, target);
501 if ((ret = st->result)) {
502 cpuhp_reset_state(st, prev_state);
509 static int bringup_wait_for_ap(unsigned int cpu)
511 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
513 /* Wait for the CPU to reach CPUHP_AP_ONLINE_IDLE */
514 wait_for_ap_thread(st, true);
515 if (WARN_ON_ONCE((!cpu_online(cpu))))
518 /* Unpark the stopper thread and the hotplug thread of the target cpu */
519 stop_machine_unpark(cpu);
520 kthread_unpark(st->thread);
523 * SMT soft disabling on X86 requires to bring the CPU out of the
524 * BIOS 'wait for SIPI' state in order to set the CR4.MCE bit. The
525 * CPU marked itself as booted_once in cpu_notify_starting() so the
526 * cpu_smt_allowed() check will now return false if this is not the
529 if (!cpu_smt_allowed(cpu))
532 if (st->target <= CPUHP_AP_ONLINE_IDLE)
535 return cpuhp_kick_ap(st, st->target);
538 static int bringup_cpu(unsigned int cpu)
540 struct task_struct *idle = idle_thread_get(cpu);
544 * Some architectures have to walk the irq descriptors to
545 * setup the vector space for the cpu which comes online.
546 * Prevent irq alloc/free across the bringup.
550 /* Arch-specific enabling code. */
551 ret = __cpu_up(cpu, idle);
555 return bringup_wait_for_ap(cpu);
559 * Hotplug state machine related functions
562 static void undo_cpu_up(unsigned int cpu, struct cpuhp_cpu_state *st)
564 for (st->state--; st->state > st->target; st->state--)
565 cpuhp_invoke_callback(cpu, st->state, false, NULL, NULL);
568 static inline bool can_rollback_cpu(struct cpuhp_cpu_state *st)
570 if (IS_ENABLED(CONFIG_HOTPLUG_CPU))
573 * When CPU hotplug is disabled, then taking the CPU down is not
574 * possible because takedown_cpu() and the architecture and
575 * subsystem specific mechanisms are not available. So the CPU
576 * which would be completely unplugged again needs to stay around
577 * in the current state.
579 return st->state <= CPUHP_BRINGUP_CPU;
582 static int cpuhp_up_callbacks(unsigned int cpu, struct cpuhp_cpu_state *st,
583 enum cpuhp_state target)
585 enum cpuhp_state prev_state = st->state;
588 while (st->state < target) {
590 ret = cpuhp_invoke_callback(cpu, st->state, true, NULL, NULL);
592 if (can_rollback_cpu(st)) {
593 st->target = prev_state;
594 undo_cpu_up(cpu, st);
603 * The cpu hotplug threads manage the bringup and teardown of the cpus
605 static void cpuhp_create(unsigned int cpu)
607 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
609 init_completion(&st->done_up);
610 init_completion(&st->done_down);
613 static int cpuhp_should_run(unsigned int cpu)
615 struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state);
617 return st->should_run;
621 * Execute teardown/startup callbacks on the plugged cpu. Also used to invoke
622 * callbacks when a state gets [un]installed at runtime.
624 * Each invocation of this function by the smpboot thread does a single AP
627 * It has 3 modes of operation:
628 * - single: runs st->cb_state
629 * - up: runs ++st->state, while st->state < st->target
630 * - down: runs st->state--, while st->state > st->target
632 * When complete or on error, should_run is cleared and the completion is fired.
634 static void cpuhp_thread_fun(unsigned int cpu)
636 struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state);
637 bool bringup = st->bringup;
638 enum cpuhp_state state;
640 if (WARN_ON_ONCE(!st->should_run))
644 * ACQUIRE for the cpuhp_should_run() load of ->should_run. Ensures
645 * that if we see ->should_run we also see the rest of the state.
650 * The BP holds the hotplug lock, but we're now running on the AP,
651 * ensure that anybody asserting the lock is held, will actually find
654 lockdep_acquire_cpus_lock();
655 cpuhp_lock_acquire(bringup);
658 state = st->cb_state;
659 st->should_run = false;
664 st->should_run = (st->state < st->target);
665 WARN_ON_ONCE(st->state > st->target);
669 st->should_run = (st->state > st->target);
670 WARN_ON_ONCE(st->state < st->target);
674 WARN_ON_ONCE(!cpuhp_is_ap_state(state));
676 if (cpuhp_is_atomic_state(state)) {
678 st->result = cpuhp_invoke_callback(cpu, state, bringup, st->node, &st->last);
682 * STARTING/DYING must not fail!
684 WARN_ON_ONCE(st->result);
686 st->result = cpuhp_invoke_callback(cpu, state, bringup, st->node, &st->last);
691 * If we fail on a rollback, we're up a creek without no
692 * paddle, no way forward, no way back. We loose, thanks for
695 WARN_ON_ONCE(st->rollback);
696 st->should_run = false;
699 cpuhp_lock_release(bringup);
700 lockdep_release_cpus_lock();
703 complete_ap_thread(st, bringup);
706 /* Invoke a single callback on a remote cpu */
708 cpuhp_invoke_ap_callback(int cpu, enum cpuhp_state state, bool bringup,
709 struct hlist_node *node)
711 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
714 if (!cpu_online(cpu))
717 cpuhp_lock_acquire(false);
718 cpuhp_lock_release(false);
720 cpuhp_lock_acquire(true);
721 cpuhp_lock_release(true);
724 * If we are up and running, use the hotplug thread. For early calls
725 * we invoke the thread function directly.
728 return cpuhp_invoke_callback(cpu, state, bringup, node, NULL);
730 st->rollback = false;
734 st->bringup = bringup;
735 st->cb_state = state;
741 * If we failed and did a partial, do a rollback.
743 if ((ret = st->result) && st->last) {
745 st->bringup = !bringup;
751 * Clean up the leftovers so the next hotplug operation wont use stale
754 st->node = st->last = NULL;
758 static int cpuhp_kick_ap_work(unsigned int cpu)
760 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
761 enum cpuhp_state prev_state = st->state;
764 cpuhp_lock_acquire(false);
765 cpuhp_lock_release(false);
767 cpuhp_lock_acquire(true);
768 cpuhp_lock_release(true);
770 trace_cpuhp_enter(cpu, st->target, prev_state, cpuhp_kick_ap_work);
771 ret = cpuhp_kick_ap(st, st->target);
772 trace_cpuhp_exit(cpu, st->state, prev_state, ret);
777 static struct smp_hotplug_thread cpuhp_threads = {
778 .store = &cpuhp_state.thread,
779 .create = &cpuhp_create,
780 .thread_should_run = cpuhp_should_run,
781 .thread_fn = cpuhp_thread_fun,
782 .thread_comm = "cpuhp/%u",
786 void __init cpuhp_threads_init(void)
788 BUG_ON(smpboot_register_percpu_thread(&cpuhp_threads));
789 kthread_unpark(this_cpu_read(cpuhp_state.thread));
792 #ifdef CONFIG_HOTPLUG_CPU
794 * clear_tasks_mm_cpumask - Safely clear tasks' mm_cpumask for a CPU
797 * This function walks all processes, finds a valid mm struct for each one and
798 * then clears a corresponding bit in mm's cpumask. While this all sounds
799 * trivial, there are various non-obvious corner cases, which this function
800 * tries to solve in a safe manner.
802 * Also note that the function uses a somewhat relaxed locking scheme, so it may
803 * be called only for an already offlined CPU.
805 void clear_tasks_mm_cpumask(int cpu)
807 struct task_struct *p;
810 * This function is called after the cpu is taken down and marked
811 * offline, so its not like new tasks will ever get this cpu set in
812 * their mm mask. -- Peter Zijlstra
813 * Thus, we may use rcu_read_lock() here, instead of grabbing
814 * full-fledged tasklist_lock.
816 WARN_ON(cpu_online(cpu));
818 for_each_process(p) {
819 struct task_struct *t;
822 * Main thread might exit, but other threads may still have
823 * a valid mm. Find one.
825 t = find_lock_task_mm(p);
828 cpumask_clear_cpu(cpu, mm_cpumask(t->mm));
834 /* Take this CPU down. */
835 static int take_cpu_down(void *_param)
837 struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state);
838 enum cpuhp_state target = max((int)st->target, CPUHP_AP_OFFLINE);
839 int err, cpu = smp_processor_id();
842 /* Ensure this CPU doesn't handle any more interrupts. */
843 err = __cpu_disable();
848 * We get here while we are in CPUHP_TEARDOWN_CPU state and we must not
849 * do this step again.
851 WARN_ON(st->state != CPUHP_TEARDOWN_CPU);
853 /* Invoke the former CPU_DYING callbacks */
854 for (; st->state > target; st->state--) {
855 ret = cpuhp_invoke_callback(cpu, st->state, false, NULL, NULL);
857 * DYING must not fail!
862 /* Give up timekeeping duties */
863 tick_handover_do_timer();
864 /* Remove CPU from timer broadcasting */
865 tick_offline_cpu(cpu);
866 /* Park the stopper thread */
867 stop_machine_park(cpu);
871 static int takedown_cpu(unsigned int cpu)
873 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
876 /* Park the smpboot threads */
877 kthread_park(per_cpu_ptr(&cpuhp_state, cpu)->thread);
880 * Prevent irq alloc/free while the dying cpu reorganizes the
881 * interrupt affinities.
886 * So now all preempt/rcu users must observe !cpu_active().
888 err = stop_machine_cpuslocked(take_cpu_down, NULL, cpumask_of(cpu));
890 /* CPU refused to die */
892 /* Unpark the hotplug thread so we can rollback there */
893 kthread_unpark(per_cpu_ptr(&cpuhp_state, cpu)->thread);
896 BUG_ON(cpu_online(cpu));
899 * The teardown callback for CPUHP_AP_SCHED_STARTING will have removed
900 * all runnable tasks from the CPU, there's only the idle task left now
901 * that the migration thread is done doing the stop_machine thing.
903 * Wait for the stop thread to go away.
905 wait_for_ap_thread(st, false);
906 BUG_ON(st->state != CPUHP_AP_IDLE_DEAD);
908 /* Interrupts are moved away from the dying cpu, reenable alloc/free */
911 hotplug_cpu__broadcast_tick_pull(cpu);
912 /* This actually kills the CPU. */
915 tick_cleanup_dead_cpu(cpu);
916 rcutree_migrate_callbacks(cpu);
920 static void cpuhp_complete_idle_dead(void *arg)
922 struct cpuhp_cpu_state *st = arg;
924 complete_ap_thread(st, false);
927 void cpuhp_report_idle_dead(void)
929 struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state);
931 BUG_ON(st->state != CPUHP_AP_OFFLINE);
932 rcu_report_dead(smp_processor_id());
933 st->state = CPUHP_AP_IDLE_DEAD;
935 * We cannot call complete after rcu_report_dead() so we delegate it
938 smp_call_function_single(cpumask_first(cpu_online_mask),
939 cpuhp_complete_idle_dead, st, 0);
942 static void undo_cpu_down(unsigned int cpu, struct cpuhp_cpu_state *st)
944 for (st->state++; st->state < st->target; st->state++)
945 cpuhp_invoke_callback(cpu, st->state, true, NULL, NULL);
948 static int cpuhp_down_callbacks(unsigned int cpu, struct cpuhp_cpu_state *st,
949 enum cpuhp_state target)
951 enum cpuhp_state prev_state = st->state;
954 for (; st->state > target; st->state--) {
955 ret = cpuhp_invoke_callback(cpu, st->state, false, NULL, NULL);
957 st->target = prev_state;
958 if (st->state < prev_state)
959 undo_cpu_down(cpu, st);
966 /* Requires cpu_add_remove_lock to be held */
967 static int __ref _cpu_down(unsigned int cpu, int tasks_frozen,
968 enum cpuhp_state target)
970 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
971 int prev_state, ret = 0;
973 if (num_online_cpus() == 1)
976 if (!cpu_present(cpu))
981 cpuhp_tasks_frozen = tasks_frozen;
983 prev_state = cpuhp_set_state(st, target);
985 * If the current CPU state is in the range of the AP hotplug thread,
986 * then we need to kick the thread.
988 if (st->state > CPUHP_TEARDOWN_CPU) {
989 st->target = max((int)target, CPUHP_TEARDOWN_CPU);
990 ret = cpuhp_kick_ap_work(cpu);
992 * The AP side has done the error rollback already. Just
993 * return the error code..
999 * We might have stopped still in the range of the AP hotplug
1000 * thread. Nothing to do anymore.
1002 if (st->state > CPUHP_TEARDOWN_CPU)
1005 st->target = target;
1008 * The AP brought itself down to CPUHP_TEARDOWN_CPU. So we need
1009 * to do the further cleanups.
1011 ret = cpuhp_down_callbacks(cpu, st, target);
1012 if (ret && st->state == CPUHP_TEARDOWN_CPU && st->state < prev_state) {
1013 cpuhp_reset_state(st, prev_state);
1014 __cpuhp_kick_ap(st);
1018 cpus_write_unlock();
1020 * Do post unplug cleanup. This is still protected against
1021 * concurrent CPU hotplug via cpu_add_remove_lock.
1023 lockup_detector_cleanup();
1028 static int cpu_down_maps_locked(unsigned int cpu, enum cpuhp_state target)
1030 if (cpu_hotplug_disabled)
1032 return _cpu_down(cpu, 0, target);
1035 static int do_cpu_down(unsigned int cpu, enum cpuhp_state target)
1039 cpu_maps_update_begin();
1040 err = cpu_down_maps_locked(cpu, target);
1041 cpu_maps_update_done();
1045 int cpu_down(unsigned int cpu)
1047 return do_cpu_down(cpu, CPUHP_OFFLINE);
1049 EXPORT_SYMBOL(cpu_down);
1052 #define takedown_cpu NULL
1053 #endif /*CONFIG_HOTPLUG_CPU*/
1056 * notify_cpu_starting(cpu) - Invoke the callbacks on the starting CPU
1057 * @cpu: cpu that just started
1059 * It must be called by the arch code on the new cpu, before the new cpu
1060 * enables interrupts and before the "boot" cpu returns from __cpu_up().
1062 void notify_cpu_starting(unsigned int cpu)
1064 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
1065 enum cpuhp_state target = min((int)st->target, CPUHP_AP_ONLINE);
1068 rcu_cpu_starting(cpu); /* Enables RCU usage on this CPU. */
1069 st->booted_once = true;
1070 while (st->state < target) {
1072 ret = cpuhp_invoke_callback(cpu, st->state, true, NULL, NULL);
1074 * STARTING must not fail!
1081 * Called from the idle task. Wake up the controlling task which brings the
1082 * stopper and the hotplug thread of the upcoming CPU up and then delegates
1083 * the rest of the online bringup to the hotplug thread.
1085 void cpuhp_online_idle(enum cpuhp_state state)
1087 struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state);
1089 /* Happens for the boot cpu */
1090 if (state != CPUHP_AP_ONLINE_IDLE)
1093 st->state = CPUHP_AP_ONLINE_IDLE;
1094 complete_ap_thread(st, true);
1097 /* Requires cpu_add_remove_lock to be held */
1098 static int _cpu_up(unsigned int cpu, int tasks_frozen, enum cpuhp_state target)
1100 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
1101 struct task_struct *idle;
1106 if (!cpu_present(cpu)) {
1112 * The caller of do_cpu_up might have raced with another
1113 * caller. Ignore it for now.
1115 if (st->state >= target)
1118 if (st->state == CPUHP_OFFLINE) {
1119 /* Let it fail before we try to bring the cpu up */
1120 idle = idle_thread_get(cpu);
1122 ret = PTR_ERR(idle);
1127 cpuhp_tasks_frozen = tasks_frozen;
1129 cpuhp_set_state(st, target);
1131 * If the current CPU state is in the range of the AP hotplug thread,
1132 * then we need to kick the thread once more.
1134 if (st->state > CPUHP_BRINGUP_CPU) {
1135 ret = cpuhp_kick_ap_work(cpu);
1137 * The AP side has done the error rollback already. Just
1138 * return the error code..
1145 * Try to reach the target state. We max out on the BP at
1146 * CPUHP_BRINGUP_CPU. After that the AP hotplug thread is
1147 * responsible for bringing it up to the target state.
1149 target = min((int)target, CPUHP_BRINGUP_CPU);
1150 ret = cpuhp_up_callbacks(cpu, st, target);
1152 cpus_write_unlock();
1157 static int do_cpu_up(unsigned int cpu, enum cpuhp_state target)
1161 if (!cpu_possible(cpu)) {
1162 pr_err("can't online cpu %d because it is not configured as may-hotadd at boot time\n",
1164 #if defined(CONFIG_IA64)
1165 pr_err("please check additional_cpus= boot parameter\n");
1170 err = try_online_node(cpu_to_node(cpu));
1174 cpu_maps_update_begin();
1176 if (cpu_hotplug_disabled) {
1180 if (!cpu_smt_allowed(cpu)) {
1185 err = _cpu_up(cpu, 0, target);
1187 cpu_maps_update_done();
1191 int cpu_up(unsigned int cpu)
1193 return do_cpu_up(cpu, CPUHP_ONLINE);
1195 EXPORT_SYMBOL_GPL(cpu_up);
1197 #ifdef CONFIG_PM_SLEEP_SMP
1198 static cpumask_var_t frozen_cpus;
1200 int freeze_secondary_cpus(int primary)
1204 cpu_maps_update_begin();
1205 if (primary == -1) {
1206 primary = cpumask_first(cpu_online_mask);
1207 if (!housekeeping_cpu(primary, HK_FLAG_TIMER))
1208 primary = housekeeping_any_cpu(HK_FLAG_TIMER);
1210 if (!cpu_online(primary))
1211 primary = cpumask_first(cpu_online_mask);
1215 * We take down all of the non-boot CPUs in one shot to avoid races
1216 * with the userspace trying to use the CPU hotplug at the same time
1218 cpumask_clear(frozen_cpus);
1220 pr_info("Disabling non-boot CPUs ...\n");
1221 for_each_online_cpu(cpu) {
1224 trace_suspend_resume(TPS("CPU_OFF"), cpu, true);
1225 error = _cpu_down(cpu, 1, CPUHP_OFFLINE);
1226 trace_suspend_resume(TPS("CPU_OFF"), cpu, false);
1228 cpumask_set_cpu(cpu, frozen_cpus);
1230 pr_err("Error taking CPU%d down: %d\n", cpu, error);
1236 BUG_ON(num_online_cpus() > 1);
1238 pr_err("Non-boot CPUs are not disabled\n");
1241 * Make sure the CPUs won't be enabled by someone else. We need to do
1242 * this even in case of failure as all disable_nonboot_cpus() users are
1243 * supposed to do enable_nonboot_cpus() on the failure path.
1245 cpu_hotplug_disabled++;
1247 cpu_maps_update_done();
1251 void __weak arch_enable_nonboot_cpus_begin(void)
1255 void __weak arch_enable_nonboot_cpus_end(void)
1259 void enable_nonboot_cpus(void)
1263 /* Allow everyone to use the CPU hotplug again */
1264 cpu_maps_update_begin();
1265 __cpu_hotplug_enable();
1266 if (cpumask_empty(frozen_cpus))
1269 pr_info("Enabling non-boot CPUs ...\n");
1271 arch_enable_nonboot_cpus_begin();
1273 for_each_cpu(cpu, frozen_cpus) {
1274 trace_suspend_resume(TPS("CPU_ON"), cpu, true);
1275 error = _cpu_up(cpu, 1, CPUHP_ONLINE);
1276 trace_suspend_resume(TPS("CPU_ON"), cpu, false);
1278 pr_info("CPU%d is up\n", cpu);
1281 pr_warn("Error taking CPU%d up: %d\n", cpu, error);
1284 arch_enable_nonboot_cpus_end();
1286 cpumask_clear(frozen_cpus);
1288 cpu_maps_update_done();
1291 static int __init alloc_frozen_cpus(void)
1293 if (!alloc_cpumask_var(&frozen_cpus, GFP_KERNEL|__GFP_ZERO))
1297 core_initcall(alloc_frozen_cpus);
1300 * When callbacks for CPU hotplug notifications are being executed, we must
1301 * ensure that the state of the system with respect to the tasks being frozen
1302 * or not, as reported by the notification, remains unchanged *throughout the
1303 * duration* of the execution of the callbacks.
1304 * Hence we need to prevent the freezer from racing with regular CPU hotplug.
1306 * This synchronization is implemented by mutually excluding regular CPU
1307 * hotplug and Suspend/Hibernate call paths by hooking onto the Suspend/
1308 * Hibernate notifications.
1311 cpu_hotplug_pm_callback(struct notifier_block *nb,
1312 unsigned long action, void *ptr)
1316 case PM_SUSPEND_PREPARE:
1317 case PM_HIBERNATION_PREPARE:
1318 cpu_hotplug_disable();
1321 case PM_POST_SUSPEND:
1322 case PM_POST_HIBERNATION:
1323 cpu_hotplug_enable();
1334 static int __init cpu_hotplug_pm_sync_init(void)
1337 * cpu_hotplug_pm_callback has higher priority than x86
1338 * bsp_pm_callback which depends on cpu_hotplug_pm_callback
1339 * to disable cpu hotplug to avoid cpu hotplug race.
1341 pm_notifier(cpu_hotplug_pm_callback, 0);
1344 core_initcall(cpu_hotplug_pm_sync_init);
1346 #endif /* CONFIG_PM_SLEEP_SMP */
1350 #endif /* CONFIG_SMP */
1352 /* Boot processor state steps */
1353 static struct cpuhp_step cpuhp_hp_states[] = {
1356 .startup.single = NULL,
1357 .teardown.single = NULL,
1360 [CPUHP_CREATE_THREADS]= {
1361 .name = "threads:prepare",
1362 .startup.single = smpboot_create_threads,
1363 .teardown.single = NULL,
1366 [CPUHP_PERF_PREPARE] = {
1367 .name = "perf:prepare",
1368 .startup.single = perf_event_init_cpu,
1369 .teardown.single = perf_event_exit_cpu,
1371 [CPUHP_WORKQUEUE_PREP] = {
1372 .name = "workqueue:prepare",
1373 .startup.single = workqueue_prepare_cpu,
1374 .teardown.single = NULL,
1376 [CPUHP_HRTIMERS_PREPARE] = {
1377 .name = "hrtimers:prepare",
1378 .startup.single = hrtimers_prepare_cpu,
1379 .teardown.single = hrtimers_dead_cpu,
1381 [CPUHP_SMPCFD_PREPARE] = {
1382 .name = "smpcfd:prepare",
1383 .startup.single = smpcfd_prepare_cpu,
1384 .teardown.single = smpcfd_dead_cpu,
1386 [CPUHP_RELAY_PREPARE] = {
1387 .name = "relay:prepare",
1388 .startup.single = relay_prepare_cpu,
1389 .teardown.single = NULL,
1391 [CPUHP_SLAB_PREPARE] = {
1392 .name = "slab:prepare",
1393 .startup.single = slab_prepare_cpu,
1394 .teardown.single = slab_dead_cpu,
1396 [CPUHP_RCUTREE_PREP] = {
1397 .name = "RCU/tree:prepare",
1398 .startup.single = rcutree_prepare_cpu,
1399 .teardown.single = rcutree_dead_cpu,
1402 * On the tear-down path, timers_dead_cpu() must be invoked
1403 * before blk_mq_queue_reinit_notify() from notify_dead(),
1404 * otherwise a RCU stall occurs.
1406 [CPUHP_TIMERS_PREPARE] = {
1407 .name = "timers:prepare",
1408 .startup.single = timers_prepare_cpu,
1409 .teardown.single = timers_dead_cpu,
1411 /* Kicks the plugged cpu into life */
1412 [CPUHP_BRINGUP_CPU] = {
1413 .name = "cpu:bringup",
1414 .startup.single = bringup_cpu,
1415 .teardown.single = NULL,
1418 /* Final state before CPU kills itself */
1419 [CPUHP_AP_IDLE_DEAD] = {
1420 .name = "idle:dead",
1423 * Last state before CPU enters the idle loop to die. Transient state
1424 * for synchronization.
1426 [CPUHP_AP_OFFLINE] = {
1427 .name = "ap:offline",
1430 /* First state is scheduler control. Interrupts are disabled */
1431 [CPUHP_AP_SCHED_STARTING] = {
1432 .name = "sched:starting",
1433 .startup.single = sched_cpu_starting,
1434 .teardown.single = sched_cpu_dying,
1436 [CPUHP_AP_RCUTREE_DYING] = {
1437 .name = "RCU/tree:dying",
1438 .startup.single = NULL,
1439 .teardown.single = rcutree_dying_cpu,
1441 [CPUHP_AP_SMPCFD_DYING] = {
1442 .name = "smpcfd:dying",
1443 .startup.single = NULL,
1444 .teardown.single = smpcfd_dying_cpu,
1446 /* Entry state on starting. Interrupts enabled from here on. Transient
1447 * state for synchronsization */
1448 [CPUHP_AP_ONLINE] = {
1449 .name = "ap:online",
1452 * Handled on controll processor until the plugged processor manages
1455 [CPUHP_TEARDOWN_CPU] = {
1456 .name = "cpu:teardown",
1457 .startup.single = NULL,
1458 .teardown.single = takedown_cpu,
1461 /* Handle smpboot threads park/unpark */
1462 [CPUHP_AP_SMPBOOT_THREADS] = {
1463 .name = "smpboot/threads:online",
1464 .startup.single = smpboot_unpark_threads,
1465 .teardown.single = smpboot_park_threads,
1467 [CPUHP_AP_IRQ_AFFINITY_ONLINE] = {
1468 .name = "irq/affinity:online",
1469 .startup.single = irq_affinity_online_cpu,
1470 .teardown.single = NULL,
1472 [CPUHP_AP_PERF_ONLINE] = {
1473 .name = "perf:online",
1474 .startup.single = perf_event_init_cpu,
1475 .teardown.single = perf_event_exit_cpu,
1477 [CPUHP_AP_WATCHDOG_ONLINE] = {
1478 .name = "lockup_detector:online",
1479 .startup.single = lockup_detector_online_cpu,
1480 .teardown.single = lockup_detector_offline_cpu,
1482 [CPUHP_AP_WORKQUEUE_ONLINE] = {
1483 .name = "workqueue:online",
1484 .startup.single = workqueue_online_cpu,
1485 .teardown.single = workqueue_offline_cpu,
1487 [CPUHP_AP_RCUTREE_ONLINE] = {
1488 .name = "RCU/tree:online",
1489 .startup.single = rcutree_online_cpu,
1490 .teardown.single = rcutree_offline_cpu,
1494 * The dynamically registered state space is here
1498 /* Last state is scheduler control setting the cpu active */
1499 [CPUHP_AP_ACTIVE] = {
1500 .name = "sched:active",
1501 .startup.single = sched_cpu_activate,
1502 .teardown.single = sched_cpu_deactivate,
1506 /* CPU is fully up and running. */
1509 .startup.single = NULL,
1510 .teardown.single = NULL,
1514 /* Sanity check for callbacks */
1515 static int cpuhp_cb_check(enum cpuhp_state state)
1517 if (state <= CPUHP_OFFLINE || state >= CPUHP_ONLINE)
1523 * Returns a free for dynamic slot assignment of the Online state. The states
1524 * are protected by the cpuhp_slot_states mutex and an empty slot is identified
1525 * by having no name assigned.
1527 static int cpuhp_reserve_state(enum cpuhp_state state)
1529 enum cpuhp_state i, end;
1530 struct cpuhp_step *step;
1533 case CPUHP_AP_ONLINE_DYN:
1534 step = cpuhp_hp_states + CPUHP_AP_ONLINE_DYN;
1535 end = CPUHP_AP_ONLINE_DYN_END;
1537 case CPUHP_BP_PREPARE_DYN:
1538 step = cpuhp_hp_states + CPUHP_BP_PREPARE_DYN;
1539 end = CPUHP_BP_PREPARE_DYN_END;
1545 for (i = state; i <= end; i++, step++) {
1549 WARN(1, "No more dynamic states available for CPU hotplug\n");
1553 static int cpuhp_store_callbacks(enum cpuhp_state state, const char *name,
1554 int (*startup)(unsigned int cpu),
1555 int (*teardown)(unsigned int cpu),
1556 bool multi_instance)
1558 /* (Un)Install the callbacks for further cpu hotplug operations */
1559 struct cpuhp_step *sp;
1563 * If name is NULL, then the state gets removed.
1565 * CPUHP_AP_ONLINE_DYN and CPUHP_BP_PREPARE_DYN are handed out on
1566 * the first allocation from these dynamic ranges, so the removal
1567 * would trigger a new allocation and clear the wrong (already
1568 * empty) state, leaving the callbacks of the to be cleared state
1569 * dangling, which causes wreckage on the next hotplug operation.
1571 if (name && (state == CPUHP_AP_ONLINE_DYN ||
1572 state == CPUHP_BP_PREPARE_DYN)) {
1573 ret = cpuhp_reserve_state(state);
1578 sp = cpuhp_get_step(state);
1579 if (name && sp->name)
1582 sp->startup.single = startup;
1583 sp->teardown.single = teardown;
1585 sp->multi_instance = multi_instance;
1586 INIT_HLIST_HEAD(&sp->list);
1590 static void *cpuhp_get_teardown_cb(enum cpuhp_state state)
1592 return cpuhp_get_step(state)->teardown.single;
1596 * Call the startup/teardown function for a step either on the AP or
1597 * on the current CPU.
1599 static int cpuhp_issue_call(int cpu, enum cpuhp_state state, bool bringup,
1600 struct hlist_node *node)
1602 struct cpuhp_step *sp = cpuhp_get_step(state);
1606 * If there's nothing to do, we done.
1607 * Relies on the union for multi_instance.
1609 if ((bringup && !sp->startup.single) ||
1610 (!bringup && !sp->teardown.single))
1613 * The non AP bound callbacks can fail on bringup. On teardown
1614 * e.g. module removal we crash for now.
1617 if (cpuhp_is_ap_state(state))
1618 ret = cpuhp_invoke_ap_callback(cpu, state, bringup, node);
1620 ret = cpuhp_invoke_callback(cpu, state, bringup, node, NULL);
1622 ret = cpuhp_invoke_callback(cpu, state, bringup, node, NULL);
1624 BUG_ON(ret && !bringup);
1629 * Called from __cpuhp_setup_state on a recoverable failure.
1631 * Note: The teardown callbacks for rollback are not allowed to fail!
1633 static void cpuhp_rollback_install(int failedcpu, enum cpuhp_state state,
1634 struct hlist_node *node)
1638 /* Roll back the already executed steps on the other cpus */
1639 for_each_present_cpu(cpu) {
1640 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
1641 int cpustate = st->state;
1643 if (cpu >= failedcpu)
1646 /* Did we invoke the startup call on that cpu ? */
1647 if (cpustate >= state)
1648 cpuhp_issue_call(cpu, state, false, node);
1652 int __cpuhp_state_add_instance_cpuslocked(enum cpuhp_state state,
1653 struct hlist_node *node,
1656 struct cpuhp_step *sp;
1660 lockdep_assert_cpus_held();
1662 sp = cpuhp_get_step(state);
1663 if (sp->multi_instance == false)
1666 mutex_lock(&cpuhp_state_mutex);
1668 if (!invoke || !sp->startup.multi)
1672 * Try to call the startup callback for each present cpu
1673 * depending on the hotplug state of the cpu.
1675 for_each_present_cpu(cpu) {
1676 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
1677 int cpustate = st->state;
1679 if (cpustate < state)
1682 ret = cpuhp_issue_call(cpu, state, true, node);
1684 if (sp->teardown.multi)
1685 cpuhp_rollback_install(cpu, state, node);
1691 hlist_add_head(node, &sp->list);
1693 mutex_unlock(&cpuhp_state_mutex);
1697 int __cpuhp_state_add_instance(enum cpuhp_state state, struct hlist_node *node,
1703 ret = __cpuhp_state_add_instance_cpuslocked(state, node, invoke);
1707 EXPORT_SYMBOL_GPL(__cpuhp_state_add_instance);
1710 * __cpuhp_setup_state_cpuslocked - Setup the callbacks for an hotplug machine state
1711 * @state: The state to setup
1712 * @invoke: If true, the startup function is invoked for cpus where
1713 * cpu state >= @state
1714 * @startup: startup callback function
1715 * @teardown: teardown callback function
1716 * @multi_instance: State is set up for multiple instances which get
1719 * The caller needs to hold cpus read locked while calling this function.
1722 * Positive state number if @state is CPUHP_AP_ONLINE_DYN
1723 * 0 for all other states
1724 * On failure: proper (negative) error code
1726 int __cpuhp_setup_state_cpuslocked(enum cpuhp_state state,
1727 const char *name, bool invoke,
1728 int (*startup)(unsigned int cpu),
1729 int (*teardown)(unsigned int cpu),
1730 bool multi_instance)
1735 lockdep_assert_cpus_held();
1737 if (cpuhp_cb_check(state) || !name)
1740 mutex_lock(&cpuhp_state_mutex);
1742 ret = cpuhp_store_callbacks(state, name, startup, teardown,
1745 dynstate = state == CPUHP_AP_ONLINE_DYN;
1746 if (ret > 0 && dynstate) {
1751 if (ret || !invoke || !startup)
1755 * Try to call the startup callback for each present cpu
1756 * depending on the hotplug state of the cpu.
1758 for_each_present_cpu(cpu) {
1759 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
1760 int cpustate = st->state;
1762 if (cpustate < state)
1765 ret = cpuhp_issue_call(cpu, state, true, NULL);
1768 cpuhp_rollback_install(cpu, state, NULL);
1769 cpuhp_store_callbacks(state, NULL, NULL, NULL, false);
1774 mutex_unlock(&cpuhp_state_mutex);
1776 * If the requested state is CPUHP_AP_ONLINE_DYN, return the
1777 * dynamically allocated state in case of success.
1779 if (!ret && dynstate)
1783 EXPORT_SYMBOL(__cpuhp_setup_state_cpuslocked);
1785 int __cpuhp_setup_state(enum cpuhp_state state,
1786 const char *name, bool invoke,
1787 int (*startup)(unsigned int cpu),
1788 int (*teardown)(unsigned int cpu),
1789 bool multi_instance)
1794 ret = __cpuhp_setup_state_cpuslocked(state, name, invoke, startup,
1795 teardown, multi_instance);
1799 EXPORT_SYMBOL(__cpuhp_setup_state);
1801 int __cpuhp_state_remove_instance(enum cpuhp_state state,
1802 struct hlist_node *node, bool invoke)
1804 struct cpuhp_step *sp = cpuhp_get_step(state);
1807 BUG_ON(cpuhp_cb_check(state));
1809 if (!sp->multi_instance)
1813 mutex_lock(&cpuhp_state_mutex);
1815 if (!invoke || !cpuhp_get_teardown_cb(state))
1818 * Call the teardown callback for each present cpu depending
1819 * on the hotplug state of the cpu. This function is not
1820 * allowed to fail currently!
1822 for_each_present_cpu(cpu) {
1823 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
1824 int cpustate = st->state;
1826 if (cpustate >= state)
1827 cpuhp_issue_call(cpu, state, false, node);
1832 mutex_unlock(&cpuhp_state_mutex);
1837 EXPORT_SYMBOL_GPL(__cpuhp_state_remove_instance);
1840 * __cpuhp_remove_state_cpuslocked - Remove the callbacks for an hotplug machine state
1841 * @state: The state to remove
1842 * @invoke: If true, the teardown function is invoked for cpus where
1843 * cpu state >= @state
1845 * The caller needs to hold cpus read locked while calling this function.
1846 * The teardown callback is currently not allowed to fail. Think
1847 * about module removal!
1849 void __cpuhp_remove_state_cpuslocked(enum cpuhp_state state, bool invoke)
1851 struct cpuhp_step *sp = cpuhp_get_step(state);
1854 BUG_ON(cpuhp_cb_check(state));
1856 lockdep_assert_cpus_held();
1858 mutex_lock(&cpuhp_state_mutex);
1859 if (sp->multi_instance) {
1860 WARN(!hlist_empty(&sp->list),
1861 "Error: Removing state %d which has instances left.\n",
1866 if (!invoke || !cpuhp_get_teardown_cb(state))
1870 * Call the teardown callback for each present cpu depending
1871 * on the hotplug state of the cpu. This function is not
1872 * allowed to fail currently!
1874 for_each_present_cpu(cpu) {
1875 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
1876 int cpustate = st->state;
1878 if (cpustate >= state)
1879 cpuhp_issue_call(cpu, state, false, NULL);
1882 cpuhp_store_callbacks(state, NULL, NULL, NULL, false);
1883 mutex_unlock(&cpuhp_state_mutex);
1885 EXPORT_SYMBOL(__cpuhp_remove_state_cpuslocked);
1887 void __cpuhp_remove_state(enum cpuhp_state state, bool invoke)
1890 __cpuhp_remove_state_cpuslocked(state, invoke);
1893 EXPORT_SYMBOL(__cpuhp_remove_state);
1895 #if defined(CONFIG_SYSFS) && defined(CONFIG_HOTPLUG_CPU)
1896 static ssize_t show_cpuhp_state(struct device *dev,
1897 struct device_attribute *attr, char *buf)
1899 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id);
1901 return sprintf(buf, "%d\n", st->state);
1903 static DEVICE_ATTR(state, 0444, show_cpuhp_state, NULL);
1905 static ssize_t write_cpuhp_target(struct device *dev,
1906 struct device_attribute *attr,
1907 const char *buf, size_t count)
1909 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id);
1910 struct cpuhp_step *sp;
1913 ret = kstrtoint(buf, 10, &target);
1917 #ifdef CONFIG_CPU_HOTPLUG_STATE_CONTROL
1918 if (target < CPUHP_OFFLINE || target > CPUHP_ONLINE)
1921 if (target != CPUHP_OFFLINE && target != CPUHP_ONLINE)
1925 ret = lock_device_hotplug_sysfs();
1929 mutex_lock(&cpuhp_state_mutex);
1930 sp = cpuhp_get_step(target);
1931 ret = !sp->name || sp->cant_stop ? -EINVAL : 0;
1932 mutex_unlock(&cpuhp_state_mutex);
1936 if (st->state < target)
1937 ret = do_cpu_up(dev->id, target);
1939 ret = do_cpu_down(dev->id, target);
1941 unlock_device_hotplug();
1942 return ret ? ret : count;
1945 static ssize_t show_cpuhp_target(struct device *dev,
1946 struct device_attribute *attr, char *buf)
1948 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id);
1950 return sprintf(buf, "%d\n", st->target);
1952 static DEVICE_ATTR(target, 0644, show_cpuhp_target, write_cpuhp_target);
1955 static ssize_t write_cpuhp_fail(struct device *dev,
1956 struct device_attribute *attr,
1957 const char *buf, size_t count)
1959 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id);
1960 struct cpuhp_step *sp;
1963 ret = kstrtoint(buf, 10, &fail);
1968 * Cannot fail STARTING/DYING callbacks.
1970 if (cpuhp_is_atomic_state(fail))
1974 * Cannot fail anything that doesn't have callbacks.
1976 mutex_lock(&cpuhp_state_mutex);
1977 sp = cpuhp_get_step(fail);
1978 if (!sp->startup.single && !sp->teardown.single)
1980 mutex_unlock(&cpuhp_state_mutex);
1989 static ssize_t show_cpuhp_fail(struct device *dev,
1990 struct device_attribute *attr, char *buf)
1992 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id);
1994 return sprintf(buf, "%d\n", st->fail);
1997 static DEVICE_ATTR(fail, 0644, show_cpuhp_fail, write_cpuhp_fail);
1999 static struct attribute *cpuhp_cpu_attrs[] = {
2000 &dev_attr_state.attr,
2001 &dev_attr_target.attr,
2002 &dev_attr_fail.attr,
2006 static const struct attribute_group cpuhp_cpu_attr_group = {
2007 .attrs = cpuhp_cpu_attrs,
2012 static ssize_t show_cpuhp_states(struct device *dev,
2013 struct device_attribute *attr, char *buf)
2015 ssize_t cur, res = 0;
2018 mutex_lock(&cpuhp_state_mutex);
2019 for (i = CPUHP_OFFLINE; i <= CPUHP_ONLINE; i++) {
2020 struct cpuhp_step *sp = cpuhp_get_step(i);
2023 cur = sprintf(buf, "%3d: %s\n", i, sp->name);
2028 mutex_unlock(&cpuhp_state_mutex);
2031 static DEVICE_ATTR(states, 0444, show_cpuhp_states, NULL);
2033 static struct attribute *cpuhp_cpu_root_attrs[] = {
2034 &dev_attr_states.attr,
2038 static const struct attribute_group cpuhp_cpu_root_attr_group = {
2039 .attrs = cpuhp_cpu_root_attrs,
2044 #ifdef CONFIG_HOTPLUG_SMT
2046 static void cpuhp_offline_cpu_device(unsigned int cpu)
2048 struct device *dev = get_cpu_device(cpu);
2050 dev->offline = true;
2051 /* Tell user space about the state change */
2052 kobject_uevent(&dev->kobj, KOBJ_OFFLINE);
2055 static void cpuhp_online_cpu_device(unsigned int cpu)
2057 struct device *dev = get_cpu_device(cpu);
2059 dev->offline = false;
2060 /* Tell user space about the state change */
2061 kobject_uevent(&dev->kobj, KOBJ_ONLINE);
2064 int cpuhp_smt_disable(enum cpuhp_smt_control ctrlval)
2068 cpu_maps_update_begin();
2069 for_each_online_cpu(cpu) {
2070 if (topology_is_primary_thread(cpu))
2072 ret = cpu_down_maps_locked(cpu, CPUHP_OFFLINE);
2076 * As this needs to hold the cpu maps lock it's impossible
2077 * to call device_offline() because that ends up calling
2078 * cpu_down() which takes cpu maps lock. cpu maps lock
2079 * needs to be held as this might race against in kernel
2080 * abusers of the hotplug machinery (thermal management).
2082 * So nothing would update device:offline state. That would
2083 * leave the sysfs entry stale and prevent onlining after
2084 * smt control has been changed to 'off' again. This is
2085 * called under the sysfs hotplug lock, so it is properly
2086 * serialized against the regular offline usage.
2088 cpuhp_offline_cpu_device(cpu);
2091 cpu_smt_control = ctrlval;
2092 cpu_maps_update_done();
2096 int cpuhp_smt_enable(void)
2100 cpu_maps_update_begin();
2101 cpu_smt_control = CPU_SMT_ENABLED;
2102 for_each_present_cpu(cpu) {
2103 /* Skip online CPUs and CPUs on offline nodes */
2104 if (cpu_online(cpu) || !node_online(cpu_to_node(cpu)))
2106 ret = _cpu_up(cpu, 0, CPUHP_ONLINE);
2109 /* See comment in cpuhp_smt_disable() */
2110 cpuhp_online_cpu_device(cpu);
2112 cpu_maps_update_done();
2118 __store_smt_control(struct device *dev, struct device_attribute *attr,
2119 const char *buf, size_t count)
2123 if (sysfs_streq(buf, "on"))
2124 ctrlval = CPU_SMT_ENABLED;
2125 else if (sysfs_streq(buf, "off"))
2126 ctrlval = CPU_SMT_DISABLED;
2127 else if (sysfs_streq(buf, "forceoff"))
2128 ctrlval = CPU_SMT_FORCE_DISABLED;
2132 if (cpu_smt_control == CPU_SMT_FORCE_DISABLED)
2135 if (cpu_smt_control == CPU_SMT_NOT_SUPPORTED)
2138 ret = lock_device_hotplug_sysfs();
2142 if (ctrlval != cpu_smt_control) {
2144 case CPU_SMT_ENABLED:
2145 ret = cpuhp_smt_enable();
2147 case CPU_SMT_DISABLED:
2148 case CPU_SMT_FORCE_DISABLED:
2149 ret = cpuhp_smt_disable(ctrlval);
2154 unlock_device_hotplug();
2155 return ret ? ret : count;
2158 #else /* !CONFIG_HOTPLUG_SMT */
2160 __store_smt_control(struct device *dev, struct device_attribute *attr,
2161 const char *buf, size_t count)
2165 #endif /* CONFIG_HOTPLUG_SMT */
2167 static const char *smt_states[] = {
2168 [CPU_SMT_ENABLED] = "on",
2169 [CPU_SMT_DISABLED] = "off",
2170 [CPU_SMT_FORCE_DISABLED] = "forceoff",
2171 [CPU_SMT_NOT_SUPPORTED] = "notsupported",
2172 [CPU_SMT_NOT_IMPLEMENTED] = "notimplemented",
2176 show_smt_control(struct device *dev, struct device_attribute *attr, char *buf)
2178 const char *state = smt_states[cpu_smt_control];
2180 return snprintf(buf, PAGE_SIZE - 2, "%s\n", state);
2184 store_smt_control(struct device *dev, struct device_attribute *attr,
2185 const char *buf, size_t count)
2187 return __store_smt_control(dev, attr, buf, count);
2189 static DEVICE_ATTR(control, 0644, show_smt_control, store_smt_control);
2192 show_smt_active(struct device *dev, struct device_attribute *attr, char *buf)
2194 return snprintf(buf, PAGE_SIZE - 2, "%d\n", sched_smt_active());
2196 static DEVICE_ATTR(active, 0444, show_smt_active, NULL);
2198 static struct attribute *cpuhp_smt_attrs[] = {
2199 &dev_attr_control.attr,
2200 &dev_attr_active.attr,
2204 static const struct attribute_group cpuhp_smt_attr_group = {
2205 .attrs = cpuhp_smt_attrs,
2210 static int __init cpu_smt_sysfs_init(void)
2212 return sysfs_create_group(&cpu_subsys.dev_root->kobj,
2213 &cpuhp_smt_attr_group);
2216 static int __init cpuhp_sysfs_init(void)
2220 ret = cpu_smt_sysfs_init();
2224 ret = sysfs_create_group(&cpu_subsys.dev_root->kobj,
2225 &cpuhp_cpu_root_attr_group);
2229 for_each_possible_cpu(cpu) {
2230 struct device *dev = get_cpu_device(cpu);
2234 ret = sysfs_create_group(&dev->kobj, &cpuhp_cpu_attr_group);
2240 device_initcall(cpuhp_sysfs_init);
2241 #endif /* CONFIG_SYSFS && CONFIG_HOTPLUG_CPU */
2244 * cpu_bit_bitmap[] is a special, "compressed" data structure that
2245 * represents all NR_CPUS bits binary values of 1<<nr.
2247 * It is used by cpumask_of() to get a constant address to a CPU
2248 * mask value that has a single bit set only.
2251 /* cpu_bit_bitmap[0] is empty - so we can back into it */
2252 #define MASK_DECLARE_1(x) [x+1][0] = (1UL << (x))
2253 #define MASK_DECLARE_2(x) MASK_DECLARE_1(x), MASK_DECLARE_1(x+1)
2254 #define MASK_DECLARE_4(x) MASK_DECLARE_2(x), MASK_DECLARE_2(x+2)
2255 #define MASK_DECLARE_8(x) MASK_DECLARE_4(x), MASK_DECLARE_4(x+4)
2257 const unsigned long cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)] = {
2259 MASK_DECLARE_8(0), MASK_DECLARE_8(8),
2260 MASK_DECLARE_8(16), MASK_DECLARE_8(24),
2261 #if BITS_PER_LONG > 32
2262 MASK_DECLARE_8(32), MASK_DECLARE_8(40),
2263 MASK_DECLARE_8(48), MASK_DECLARE_8(56),
2266 EXPORT_SYMBOL_GPL(cpu_bit_bitmap);
2268 const DECLARE_BITMAP(cpu_all_bits, NR_CPUS) = CPU_BITS_ALL;
2269 EXPORT_SYMBOL(cpu_all_bits);
2271 #ifdef CONFIG_INIT_ALL_POSSIBLE
2272 struct cpumask __cpu_possible_mask __read_mostly
2275 struct cpumask __cpu_possible_mask __read_mostly;
2277 EXPORT_SYMBOL(__cpu_possible_mask);
2279 struct cpumask __cpu_online_mask __read_mostly;
2280 EXPORT_SYMBOL(__cpu_online_mask);
2282 struct cpumask __cpu_present_mask __read_mostly;
2283 EXPORT_SYMBOL(__cpu_present_mask);
2285 struct cpumask __cpu_active_mask __read_mostly;
2286 EXPORT_SYMBOL(__cpu_active_mask);
2288 void init_cpu_present(const struct cpumask *src)
2290 cpumask_copy(&__cpu_present_mask, src);
2293 void init_cpu_possible(const struct cpumask *src)
2295 cpumask_copy(&__cpu_possible_mask, src);
2298 void init_cpu_online(const struct cpumask *src)
2300 cpumask_copy(&__cpu_online_mask, src);
2304 * Activate the first processor.
2306 void __init boot_cpu_init(void)
2308 int cpu = smp_processor_id();
2310 /* Mark the boot cpu "present", "online" etc for SMP and UP case */
2311 set_cpu_online(cpu, true);
2312 set_cpu_active(cpu, true);
2313 set_cpu_present(cpu, true);
2314 set_cpu_possible(cpu, true);
2317 __boot_cpu_id = cpu;
2322 * Must be called _AFTER_ setting up the per_cpu areas
2324 void __init boot_cpu_hotplug_init(void)
2327 this_cpu_write(cpuhp_state.booted_once, true);
2329 this_cpu_write(cpuhp_state.state, CPUHP_ONLINE);
2332 enum cpu_mitigations cpu_mitigations __ro_after_init = CPU_MITIGATIONS_AUTO;
2334 static int __init mitigations_parse_cmdline(char *arg)
2336 if (!strcmp(arg, "off"))
2337 cpu_mitigations = CPU_MITIGATIONS_OFF;
2338 else if (!strcmp(arg, "auto"))
2339 cpu_mitigations = CPU_MITIGATIONS_AUTO;
2340 else if (!strcmp(arg, "auto,nosmt"))
2341 cpu_mitigations = CPU_MITIGATIONS_AUTO_NOSMT;
2345 early_param("mitigations", mitigations_parse_cmdline);