2 * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
43 #include <dt-bindings/clock/sun8i-de2.h>
44 #include <dt-bindings/clock/sun8i-h3-ccu.h>
45 #include <dt-bindings/clock/sun8i-r-ccu.h>
46 #include <dt-bindings/interrupt-controller/arm-gic.h>
47 #include <dt-bindings/reset/sun8i-de2.h>
48 #include <dt-bindings/reset/sun8i-h3-ccu.h>
49 #include <dt-bindings/reset/sun8i-r-ccu.h>
52 interrupt-parent = <&gic>;
62 compatible = "allwinner,simple-framebuffer",
64 allwinner,pipeline = "mixer0-lcd0-hdmi";
65 clocks = <&display_clocks CLK_MIXER0>,
66 <&ccu CLK_TCON0>, <&ccu CLK_HDMI>;
71 compatible = "allwinner,simple-framebuffer",
73 allwinner,pipeline = "mixer1-lcd1-tve";
74 clocks = <&display_clocks CLK_MIXER1>,
87 compatible = "fixed-clock";
88 clock-frequency = <24000000>;
89 clock-accuracy = <50000>;
90 clock-output-names = "osc24M";
95 compatible = "fixed-clock";
96 clock-frequency = <32768>;
97 clock-accuracy = <50000>;
98 clock-output-names = "ext_osc32k";
103 compatible = "allwinner,sun8i-h3-display-engine";
104 allwinner,pipelines = <&mixer0>;
109 compatible = "simple-bus";
110 #address-cells = <1>;
115 display_clocks: clock@1000000 {
116 /* compatible is in per SoC .dtsi file */
117 reg = <0x01000000 0x10000>;
118 clocks = <&ccu CLK_BUS_DE>,
122 resets = <&ccu RST_BUS_DE>;
127 mixer0: mixer@1100000 {
128 compatible = "allwinner,sun8i-h3-de2-mixer-0";
129 reg = <0x01100000 0x100000>;
130 clocks = <&display_clocks CLK_BUS_MIXER0>,
131 <&display_clocks CLK_MIXER0>;
134 resets = <&display_clocks RST_MIXER0>;
137 #address-cells = <1>;
143 mixer0_out_tcon0: endpoint {
144 remote-endpoint = <&tcon0_in_mixer0>;
150 dma: dma-controller@1c02000 {
151 compatible = "allwinner,sun8i-h3-dma";
152 reg = <0x01c02000 0x1000>;
153 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
154 clocks = <&ccu CLK_BUS_DMA>;
155 resets = <&ccu RST_BUS_DMA>;
159 tcon0: lcd-controller@1c0c000 {
160 compatible = "allwinner,sun8i-h3-tcon-tv",
161 "allwinner,sun8i-a83t-tcon-tv";
162 reg = <0x01c0c000 0x1000>;
163 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
164 clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
165 clock-names = "ahb", "tcon-ch1";
166 resets = <&ccu RST_BUS_TCON0>;
170 #address-cells = <1>;
176 tcon0_in_mixer0: endpoint {
177 remote-endpoint = <&mixer0_out_tcon0>;
182 #address-cells = <1>;
186 tcon0_out_hdmi: endpoint@1 {
188 remote-endpoint = <&hdmi_in_tcon0>;
195 /* compatible and clocks are in per SoC .dtsi file */
196 reg = <0x01c0f000 0x1000>;
197 pinctrl-names = "default";
198 pinctrl-0 = <&mmc0_pins>;
199 resets = <&ccu RST_BUS_MMC0>;
201 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
203 #address-cells = <1>;
208 /* compatible and clocks are in per SoC .dtsi file */
209 reg = <0x01c10000 0x1000>;
210 pinctrl-names = "default";
211 pinctrl-0 = <&mmc1_pins>;
212 resets = <&ccu RST_BUS_MMC1>;
214 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
216 #address-cells = <1>;
221 /* compatible and clocks are in per SoC .dtsi file */
222 reg = <0x01c11000 0x1000>;
223 resets = <&ccu RST_BUS_MMC2>;
225 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
227 #address-cells = <1>;
231 sid: eeprom@1c14000 {
232 /* compatible is in per SoC .dtsi file */
233 reg = <0x1c14000 0x400>;
234 #address-cells = <1>;
237 ths_calibration: thermal-sensor-calibration@34 {
242 msgbox: mailbox@1c17000 {
243 compatible = "allwinner,sun8i-h3-msgbox",
244 "allwinner,sun6i-a31-msgbox";
245 reg = <0x01c17000 0x1000>;
246 clocks = <&ccu CLK_BUS_MSGBOX>;
247 resets = <&ccu RST_BUS_MSGBOX>;
248 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
252 usb_otg: usb@1c19000 {
253 compatible = "allwinner,sun8i-h3-musb";
254 reg = <0x01c19000 0x400>;
255 clocks = <&ccu CLK_BUS_OTG>;
256 resets = <&ccu RST_BUS_OTG>;
257 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
258 interrupt-names = "mc";
261 extcon = <&usbphy 0>;
266 usbphy: phy@1c19400 {
267 compatible = "allwinner,sun8i-h3-usb-phy";
268 reg = <0x01c19400 0x2c>,
273 reg-names = "phy_ctrl",
278 clocks = <&ccu CLK_USB_PHY0>,
282 clock-names = "usb0_phy",
286 resets = <&ccu RST_USB_PHY0>,
290 reset-names = "usb0_reset",
299 compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
300 reg = <0x01c1a000 0x100>;
301 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
302 clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
303 resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
308 compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
309 reg = <0x01c1a400 0x100>;
310 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
311 clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
312 <&ccu CLK_USB_OHCI0>;
313 resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
318 compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
319 reg = <0x01c1b000 0x100>;
320 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
321 clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
322 resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
329 compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
330 reg = <0x01c1b400 0x100>;
331 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
332 clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
333 <&ccu CLK_USB_OHCI1>;
334 resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
341 compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
342 reg = <0x01c1c000 0x100>;
343 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
344 clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
345 resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
352 compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
353 reg = <0x01c1c400 0x100>;
354 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
355 clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
356 <&ccu CLK_USB_OHCI2>;
357 resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
364 compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
365 reg = <0x01c1d000 0x100>;
366 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
367 clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
368 resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
375 compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
376 reg = <0x01c1d400 0x100>;
377 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
378 clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
379 <&ccu CLK_USB_OHCI3>;
380 resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
387 /* compatible is in per SoC .dtsi file */
388 reg = <0x01c20000 0x400>;
389 clocks = <&osc24M>, <&rtc 0>;
390 clock-names = "hosc", "losc";
395 pio: pinctrl@1c20800 {
396 /* compatible is in per SoC .dtsi file */
397 reg = <0x01c20800 0x400>;
398 interrupt-parent = <&r_intc>;
399 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
400 <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
401 clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
402 clock-names = "apb", "hosc", "losc";
405 interrupt-controller;
406 #interrupt-cells = <3>;
409 pins = "PE0", "PE2", "PE3", "PE4", "PE5",
410 "PE6", "PE7", "PE8", "PE9", "PE10",
415 emac_rgmii_pins: emac-rgmii-pins {
416 pins = "PD0", "PD1", "PD2", "PD3", "PD4",
417 "PD5", "PD7", "PD8", "PD9", "PD10",
418 "PD12", "PD13", "PD15", "PD16", "PD17";
420 drive-strength = <40>;
423 i2c0_pins: i2c0-pins {
424 pins = "PA11", "PA12";
428 i2c1_pins: i2c1-pins {
429 pins = "PA18", "PA19";
433 i2c2_pins: i2c2-pins {
434 pins = "PE12", "PE13";
438 mmc0_pins: mmc0-pins {
439 pins = "PF0", "PF1", "PF2", "PF3",
442 drive-strength = <30>;
446 mmc1_pins: mmc1-pins {
447 pins = "PG0", "PG1", "PG2", "PG3",
450 drive-strength = <30>;
454 mmc2_8bit_pins: mmc2-8bit-pins {
455 pins = "PC5", "PC6", "PC8",
456 "PC9", "PC10", "PC11",
457 "PC12", "PC13", "PC14",
460 drive-strength = <30>;
464 spdif_tx_pin: spdif-tx-pin {
469 spi0_pins: spi0-pins {
470 pins = "PC0", "PC1", "PC2", "PC3";
474 spi1_pins: spi1-pins {
475 pins = "PA15", "PA16", "PA14", "PA13";
479 uart0_pa_pins: uart0-pa-pins {
484 uart1_pins: uart1-pins {
489 uart1_rts_cts_pins: uart1-rts-cts-pins {
494 uart2_pins: uart2-pins {
499 uart2_rts_cts_pins: uart2-rts-cts-pins {
504 uart3_pins: uart3-pins {
505 pins = "PA13", "PA14";
509 uart3_rts_cts_pins: uart3-rts-cts-pins {
510 pins = "PA15", "PA16";
516 compatible = "allwinner,sun8i-a23-timer";
517 reg = <0x01c20c00 0xa0>;
518 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
519 <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
523 emac: ethernet@1c30000 {
524 compatible = "allwinner,sun8i-h3-emac";
526 reg = <0x01c30000 0x10000>;
527 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
528 interrupt-names = "macirq";
529 resets = <&ccu RST_BUS_EMAC>;
530 reset-names = "stmmaceth";
531 clocks = <&ccu CLK_BUS_EMAC>;
532 clock-names = "stmmaceth";
536 #address-cells = <1>;
538 compatible = "snps,dwmac-mdio";
542 compatible = "allwinner,sun8i-h3-mdio-mux";
543 #address-cells = <1>;
546 mdio-parent-bus = <&mdio>;
547 /* Only one MDIO is usable at the time */
548 internal_mdio: mdio@1 {
549 compatible = "allwinner,sun8i-h3-mdio-internal";
551 #address-cells = <1>;
554 int_mii_phy: ethernet-phy@1 {
555 compatible = "ethernet-phy-ieee802.3-c22";
557 clocks = <&ccu CLK_BUS_EPHY>;
558 resets = <&ccu RST_BUS_EPHY>;
562 external_mdio: mdio@2 {
564 #address-cells = <1>;
570 mbus: dram-controller@1c62000 {
571 compatible = "allwinner,sun8i-h3-mbus";
572 reg = <0x01c62000 0x1000>;
573 clocks = <&ccu CLK_MBUS>;
574 #address-cells = <1>;
576 dma-ranges = <0x00000000 0x40000000 0xc0000000>;
577 #interconnect-cells = <1>;
581 compatible = "allwinner,sun8i-h3-spi";
582 reg = <0x01c68000 0x1000>;
583 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
584 clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
585 clock-names = "ahb", "mod";
586 dmas = <&dma 23>, <&dma 23>;
587 dma-names = "rx", "tx";
588 pinctrl-names = "default";
589 pinctrl-0 = <&spi0_pins>;
590 resets = <&ccu RST_BUS_SPI0>;
592 #address-cells = <1>;
597 compatible = "allwinner,sun8i-h3-spi";
598 reg = <0x01c69000 0x1000>;
599 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
600 clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
601 clock-names = "ahb", "mod";
602 dmas = <&dma 24>, <&dma 24>;
603 dma-names = "rx", "tx";
604 pinctrl-names = "default";
605 pinctrl-0 = <&spi1_pins>;
606 resets = <&ccu RST_BUS_SPI1>;
608 #address-cells = <1>;
612 wdt0: watchdog@1c20ca0 {
613 compatible = "allwinner,sun6i-a31-wdt";
614 reg = <0x01c20ca0 0x20>;
615 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
619 spdif: spdif@1c21000 {
620 #sound-dai-cells = <0>;
621 compatible = "allwinner,sun8i-h3-spdif";
622 reg = <0x01c21000 0x400>;
623 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
624 clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
625 resets = <&ccu RST_BUS_SPDIF>;
626 clock-names = "apb", "spdif";
633 compatible = "allwinner,sun8i-h3-pwm";
634 reg = <0x01c21400 0x8>;
641 #sound-dai-cells = <0>;
642 compatible = "allwinner,sun8i-h3-i2s";
643 reg = <0x01c22000 0x400>;
644 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
645 clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
646 clock-names = "apb", "mod";
647 dmas = <&dma 3>, <&dma 3>;
648 resets = <&ccu RST_BUS_I2S0>;
649 dma-names = "rx", "tx";
654 #sound-dai-cells = <0>;
655 compatible = "allwinner,sun8i-h3-i2s";
656 reg = <0x01c22400 0x400>;
657 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
658 clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
659 clock-names = "apb", "mod";
660 dmas = <&dma 4>, <&dma 4>;
661 resets = <&ccu RST_BUS_I2S1>;
662 dma-names = "rx", "tx";
667 #sound-dai-cells = <0>;
668 compatible = "allwinner,sun8i-h3-i2s";
669 reg = <0x01c22800 0x400>;
670 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
671 clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
672 clock-names = "apb", "mod";
674 resets = <&ccu RST_BUS_I2S2>;
679 codec: codec@1c22c00 {
680 #sound-dai-cells = <0>;
681 compatible = "allwinner,sun8i-h3-codec";
682 reg = <0x01c22c00 0x400>;
683 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
684 clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
685 clock-names = "apb", "codec";
686 resets = <&ccu RST_BUS_CODEC>;
687 dmas = <&dma 15>, <&dma 15>;
688 dma-names = "rx", "tx";
689 allwinner,codec-analog-controls = <&codec_analog>;
693 uart0: serial@1c28000 {
694 compatible = "snps,dw-apb-uart";
695 reg = <0x01c28000 0x400>;
696 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
699 clocks = <&ccu CLK_BUS_UART0>;
700 resets = <&ccu RST_BUS_UART0>;
701 dmas = <&dma 6>, <&dma 6>;
702 dma-names = "rx", "tx";
706 uart1: serial@1c28400 {
707 compatible = "snps,dw-apb-uart";
708 reg = <0x01c28400 0x400>;
709 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
712 clocks = <&ccu CLK_BUS_UART1>;
713 resets = <&ccu RST_BUS_UART1>;
714 dmas = <&dma 7>, <&dma 7>;
715 dma-names = "rx", "tx";
719 uart2: serial@1c28800 {
720 compatible = "snps,dw-apb-uart";
721 reg = <0x01c28800 0x400>;
722 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
725 clocks = <&ccu CLK_BUS_UART2>;
726 resets = <&ccu RST_BUS_UART2>;
727 dmas = <&dma 8>, <&dma 8>;
728 dma-names = "rx", "tx";
732 uart3: serial@1c28c00 {
733 compatible = "snps,dw-apb-uart";
734 reg = <0x01c28c00 0x400>;
735 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
738 clocks = <&ccu CLK_BUS_UART3>;
739 resets = <&ccu RST_BUS_UART3>;
740 dmas = <&dma 9>, <&dma 9>;
741 dma-names = "rx", "tx";
746 compatible = "allwinner,sun6i-a31-i2c";
747 reg = <0x01c2ac00 0x400>;
748 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
749 clocks = <&ccu CLK_BUS_I2C0>;
750 resets = <&ccu RST_BUS_I2C0>;
751 pinctrl-names = "default";
752 pinctrl-0 = <&i2c0_pins>;
754 #address-cells = <1>;
759 compatible = "allwinner,sun6i-a31-i2c";
760 reg = <0x01c2b000 0x400>;
761 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
762 clocks = <&ccu CLK_BUS_I2C1>;
763 resets = <&ccu RST_BUS_I2C1>;
764 pinctrl-names = "default";
765 pinctrl-0 = <&i2c1_pins>;
767 #address-cells = <1>;
772 compatible = "allwinner,sun6i-a31-i2c";
773 reg = <0x01c2b400 0x400>;
774 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
775 clocks = <&ccu CLK_BUS_I2C2>;
776 resets = <&ccu RST_BUS_I2C2>;
777 pinctrl-names = "default";
778 pinctrl-0 = <&i2c2_pins>;
780 #address-cells = <1>;
784 gic: interrupt-controller@1c81000 {
785 compatible = "arm,gic-400";
786 reg = <0x01c81000 0x1000>,
790 interrupt-controller;
791 #interrupt-cells = <3>;
792 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
795 csi: camera@1cb0000 {
796 compatible = "allwinner,sun8i-h3-csi";
797 reg = <0x01cb0000 0x1000>;
798 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
799 clocks = <&ccu CLK_BUS_CSI>,
802 clock-names = "bus", "mod", "ram";
803 resets = <&ccu RST_BUS_CSI>;
804 pinctrl-names = "default";
805 pinctrl-0 = <&csi_pins>;
810 compatible = "allwinner,sun8i-h3-dw-hdmi",
811 "allwinner,sun8i-a83t-dw-hdmi";
812 reg = <0x01ee0000 0x10000>;
814 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
815 clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
817 clock-names = "iahb", "isfr", "tmds";
818 resets = <&ccu RST_BUS_HDMI1>;
819 reset-names = "ctrl";
825 #address-cells = <1>;
831 hdmi_in_tcon0: endpoint {
832 remote-endpoint = <&tcon0_out_hdmi>;
842 hdmi_phy: hdmi-phy@1ef0000 {
843 compatible = "allwinner,sun8i-h3-hdmi-phy";
844 reg = <0x01ef0000 0x10000>;
845 clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
846 <&ccu CLK_PLL_VIDEO>;
847 clock-names = "bus", "mod", "pll-0";
848 resets = <&ccu RST_BUS_HDMI0>;
854 /* compatible is in per SoC .dtsi file */
855 reg = <0x01f00000 0x400>;
856 interrupt-parent = <&r_intc>;
857 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
858 <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
859 clock-output-names = "osc32k", "osc32k-out", "iosc";
864 r_intc: interrupt-controller@1f00c00 {
865 compatible = "allwinner,sun8i-h3-r-intc",
866 "allwinner,sun6i-a31-r-intc";
867 interrupt-controller;
868 #interrupt-cells = <3>;
869 reg = <0x01f00c00 0x400>;
870 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
873 r_ccu: clock@1f01400 {
874 compatible = "allwinner,sun8i-h3-r-ccu";
875 reg = <0x01f01400 0x100>;
876 clocks = <&osc24M>, <&rtc 0>, <&rtc 2>,
877 <&ccu CLK_PLL_PERIPH0>;
878 clock-names = "hosc", "losc", "iosc", "pll-periph";
883 codec_analog: codec-analog@1f015c0 {
884 compatible = "allwinner,sun8i-h3-codec-analog";
885 reg = <0x01f015c0 0x4>;
889 compatible = "allwinner,sun6i-a31-ir";
890 clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
891 clock-names = "apb", "ir";
892 resets = <&r_ccu RST_APB0_IR>;
893 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
894 reg = <0x01f02000 0x400>;
899 compatible = "allwinner,sun6i-a31-i2c";
900 reg = <0x01f02400 0x400>;
901 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
902 pinctrl-names = "default";
903 pinctrl-0 = <&r_i2c_pins>;
904 clocks = <&r_ccu CLK_APB0_I2C>;
905 resets = <&r_ccu RST_APB0_I2C>;
907 #address-cells = <1>;
911 r_pio: pinctrl@1f02c00 {
912 compatible = "allwinner,sun8i-h3-r-pinctrl";
913 reg = <0x01f02c00 0x400>;
914 interrupt-parent = <&r_intc>;
915 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
916 clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>;
917 clock-names = "apb", "hosc", "losc";
920 interrupt-controller;
921 #interrupt-cells = <3>;
923 r_ir_rx_pin: r-ir-rx-pin {
925 function = "s_cir_rx";
928 r_i2c_pins: r-i2c-pins {
933 r_pwm_pin: r-pwm-pin {
940 compatible = "allwinner,sun8i-h3-pwm";
941 reg = <0x01f03800 0x8>;
942 pinctrl-names = "default";
943 pinctrl-0 = <&r_pwm_pin>;