git.monstr.eu Git - linux-2.6-microblaze.git/log

kvm: selftests: do not use bitfields larger than 32-bits for PTEs

Red Hat's QE team reported test failure on access_tracking_perf_test:

Testing guest mode: PA-bits:ANY, VA-bits:48,  4K pages
guest physical test memory offset: 0x3fffbffff000

Populating memory             : 0.684014577s
Writing to populated memory   : 0.006230175s
Reading from populated memory : 0.004557805s
==== Test Assertion Failure ====
  lib/kvm_util.c:1411: false
  pid=125806 tid=125809 errno=4 - Interrupted system call
     1  0x0000000000402f7c: addr_gpa2hva at kvm_util.c:1411
     2   (inlined by) addr_gpa2hva at kvm_util.c:1405
     3  0x0000000000401f52: lookup_pfn at access_tracking_perf_test.c:98
     4   (inlined by) mark_vcpu_memory_idle at access_tracking_perf_test.c:152
     5   (inlined by) vcpu_thread_main at access_tracking_perf_test.c:232
     6  0x00007fefe9ff81ce: ?? ??:0
     7  0x00007fefe9c64d82: ?? ??:0
  No vm physical memory at 0xffbffff000

I can easily reproduce it with a Intel(R) Xeon(R) CPU E5-2630 with 46 bits
PA.

It turns out that the address translation for clearing idle page tracking
returned a wrong result; addr_gva2gpa()'s last step, which is based on
"pte[index[0]].pfn", did the calculation with 40 bits length and the
high 12 bits got truncated.  In above case the GPA address to be returned
should be 0x3fffbffff000 for GVA 0xc0000000, but it got truncated into
0xffbffff000 and the subsequent gpa2hva lookup failed.

The width of operations on bit fields greater than 32-bit is
implementation defined, and differs between GCC (which uses the bitfield
precision) and clang (which uses 64-bit arithmetic), so this is a
potential minefield.  Remove the bit fields and using manual masking
instead.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2075036
Reported-by: Nana Liu <nanliu@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: SEV: add cache flush to solve SEV cache incoherency issues

Flush the CPU caches when memory is reclaimed from an SEV guest (where
reclaim also includes it being unmapped from KVM's memslots). Due to lack
of coherency for SEV encrypted memory, failure to flush results in silent
data corruption if userspace is malicious/broken and doesn't ensure SEV
guest memory is properly pinned and unpinned.

Cache coherency is not enforced across the VM boundary in SEV (AMD APM
vol.2 Section 15.34.7). Confidential cachelines, generated by confidential
VM guests have to be explicitly flushed on the host side. If a memory page
containing dirty confidential cachelines was released by VM and reallocated
to another user, the cachelines may corrupt the new user at a later time.

KVM takes a shortcut by assuming all confidential memory remain pinned
until the end of VM lifetime. Therefore, KVM does not flush cache at
mmu_notifier invalidation events. Because of this incorrect assumption and
the lack of cache flushing, malicous userspace can crash the host kernel:
creating a malicious VM and continuously allocates/releases unpinned
confidential memory pages when the VM is running.

Add cache flush operations to mmu_notifier operations to ensure that any
physical memory leaving the guest VM get flushed. In particular, hook
mmu_notifier_invalidate_range_start and mmu_notifier_release events and
flush cache accordingly. The hook after releasing the mmu lock to avoid
contention with other vCPUs.

Cc: stable@vger.kernel.org
Suggested-by: Sean Christpherson <seanjc@google.com>
Reported-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-4-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs

Use clflush_cache_range() to flush the confidential memory when
SME_COHERENT is supported in AMD CPU. Cache flush is still needed since
SME_COHERENT only support cache invalidation at CPU side. All confidential
cache lines are still incoherent with DMA devices.

Cc: stable@vger.kerel.org
Fixes: add5e2f04541 ("KVM: SVM: Add support for the SEV-ES VMSA")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-3-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: SVM: Simplify and harden helper to flush SEV guest page(s)

Rework sev_flush_guest_memory() to explicitly handle only a single page,
and harden it to fall back to WBINVD if VM_PAGE_FLUSH fails.  Per-page
flushing is currently used only to flush the VMSA, and in its current
form, the helper is completely broken with respect to flushing actual
guest memory, i.e. won't work correctly for an arbitrary memory range.

VM_PAGE_FLUSH takes a host virtual address, and is subject to normal page
walks, i.e. will fault if the address is not present in the host page
tables or does not have the correct permissions.  Current AMD CPUs also
do not honor SMAP overrides (undocumented in kernel versions of the APM),
so passing in a userspace address is completely out of the question.  In
other words, KVM would need to manually walk the host page tables to get
the pfn, ensure the pfn is stable, and then use the direct map to invoke
VM_PAGE_FLUSH.  And the latter might not even work, e.g. if userspace is
particularly evil/clever and backs the guest with Secret Memory (which
unmaps memory from the direct map).

Signed-off-by: Sean Christopherson <seanjc@google.com>
Fixes: add5e2f04541 ("KVM: SVM: Add support for the SEV-ES VMSA")
Reported-by: Mingwei Zhang <mizhang@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-2-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Silence compiler warning in the kvm_page_table_test

When compiling kvm_page_table_test.c, I get this compiler warning
with gcc 11.2:

kvm_page_table_test.c: In function 'pre_init_before_test':
../../../../tools/include/linux/kernel.h:44:24: warning: comparison of
distinct pointer types lacks a cast
   44 |         (void) (&_max1 == &_max2);              \
      |                        ^~
kvm_page_table_test.c:281:21: note: in expansion of macro 'max'
  281 |         alignment = max(0x100000, alignment);
      |                     ^~~

Fix it by adjusting the type of the absolute value.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20220414103031.565037-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog

NMI-watchdog is one of the favorite features of kernel developers,
but it does not work in AMD guest even with vPMU enabled and worse,
the system misrepresents this capability via /proc.

This is a PMC emulation error. KVM does not pass the latest valid
value to perf_event in time when guest NMI-watchdog is running, thus
the perf_event corresponding to the watchdog counter will enter the
old state at some point after the first guest NMI injection, forcing
the hardware register PMC0 to be constantly written to 0x800000000001.

Meanwhile, the running counter should accurately reflect its new value
based on the latest coordinated pmc->counter (from vPMC's point of view)
rather than the value written directly by the guest.

Fixes: 168d918f2643 ("KVM: x86: Adjust counter sample period after a wrmsr")
Reported-by: Dongli Cao <caodongli@kingsoft.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220409015226.38619-1-likexu@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume

MSR_KVM_POLL_CONTROL is cleared on reset, thus reverting guests to
host-side polling after suspend/resume. Non-bootstrap CPUs are
restored correctly by the haltpoll driver because they are hot-unplugged
during suspend and hot-plugged during resume; however, the BSP
is not hotpluggable and remains in host-sde polling mode after
the guest resume. The makes the guest pay for the cost of vmexits
every time the guest enters idle.

Fix it by recording BSP's haltpoll state and resuming it during guest
resume.

Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1650267752-46796-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: SPDX style and spelling fixes

SPDX comments use use /* */ style comments in headers anad
// style comments in .c files. Also fix two spelling mistakes.

Signed-off-by: Tom Rix <trix@redhat.com>
Message-Id: <20220410153840.55506-1-trix@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled

Skip the APICv inhibit update for KVM_GUESTDBG_BLOCKIRQ if APICv is
disabled at the module level to avoid having to acquire the mutex and
potentially process all vCPUs. The DISABLE inhibit will (barring bugs)
never be lifted, so piling on more inhibits is unnecessary.

Fixes: cae72dcc3b21 ("KVM: x86: inhibit APICv when KVM_GUESTDBG_BLOCKIRQ active")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220420013732.3308816-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race

Make a KVM_REQ_APICV_UPDATE request when creating a vCPU with an
in-kernel local APIC and APICv enabled at the module level.  Consuming
kvm_apicv_activated() and stuffing vcpu->arch.apicv_active directly can
race with __kvm_set_or_clear_apicv_inhibit(), as vCPU creation happens
before the vCPU is fully onlined, i.e. it won't get the request made to
"all" vCPUs.  If APICv is globally inhibited between setting apicv_active
and onlining the vCPU, the vCPU will end up running with APICv enabled
and trigger KVM's sanity check.

Mark APICv as active during vCPU creation if APICv is enabled at the
module level, both to be optimistic about it's final state, e.g. to avoid
additional VMWRITEs on VMX, and because there are likely bugs lurking
since KVM checks apicv_active in multiple vCPU creation paths.  While
keeping the current behavior of consuming kvm_apicv_activated() is
arguably safer from a regression perspective, force apicv_active so that
vCPU creation runs with deterministic state and so that if there are bugs,
they are found sooner than later, i.e. not when some crazy race condition
is hit.

  WARNING: CPU: 0 PID: 484 at arch/x86/kvm/x86.c:9877 vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877
  Modules linked in:
  CPU: 0 PID: 484 Comm: syz-executor361 Not tainted 5.16.13 #2
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1~cloud0 04/01/2014
  RIP: 0010:vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877
  Call Trace:
   <TASK>
   vcpu_run arch/x86/kvm/x86.c:10039 [inline]
   kvm_arch_vcpu_ioctl_run+0x337/0x15e0 arch/x86/kvm/x86.c:10234
   kvm_vcpu_ioctl+0x4d2/0xc80 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3727
   vfs_ioctl fs/ioctl.c:51 [inline]
   __do_sys_ioctl fs/ioctl.c:874 [inline]
   __se_sys_ioctl fs/ioctl.c:860 [inline]
   __x64_sys_ioctl+0x16d/0x1d0 fs/ioctl.c:860
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x44/0xae

The bug was hit by a syzkaller spamming VM creation with 2 vCPUs and a
call to KVM_SET_GUEST_DEBUG.

  r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x0, 0x0)
  r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0)
  ioctl$KVM_CAP_SPLIT_IRQCHIP(r1, 0x4068aea3, &(0x7f0000000000)) (async)
  r2 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x0) (async)
  r3 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x400000000000002)
  ioctl$KVM_SET_GUEST_DEBUG(r3, 0x4048ae9b, &(0x7f00000000c0)={0x5dda9c14aa95f5c5})
  ioctl$KVM_RUN(r2, 0xae80, 0x0)

Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Fixes: 8df14af42f00 ("kvm: x86: Add support for dynamic APICv activation")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220420013732.3308816-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Defer APICv updates while L2 is active until L1 is active

Defer APICv updates that occur while L2 is active until nested VM-Exit,
i.e. until L1 regains control.  vmx_refresh_apicv_exec_ctrl() assumes L1
is active and (a) stomps all over vmcs02 and (b) neglects to ever updated
vmcs01.  E.g. if vmcs12 doesn't enable the TPR shadow for L2 (and thus no
APICv controls), L1 performs nested VM-Enter APICv inhibited, and APICv
becomes unhibited while L2 is active, KVM will set various APICv controls
in vmcs02 and trigger a failed VM-Entry.  The kicker is that, unless
running with nested_early_check=1, KVM blames L1 and chaos ensues.

In all cases, ignoring vmcs02 and always deferring the inhibition change
to vmcs01 is correct (or at least acceptable).  The ABSENT and DISABLE
inhibitions cannot truly change while L2 is active (see below).

IRQ_BLOCKING can change, but it is firmly a best effort debug feature.
Furthermore, only L2's APIC is accelerated/virtualized to the full extent
possible, e.g. even if L1 passes through its APIC to L2, normal MMIO/MSR
interception will apply to the virtual APIC managed by KVM.
The exception is the SELF_IPI register when x2APIC is enabled, but that's
an acceptable hole.

Lastly, Hyper-V's Auto EOI can technically be toggled if L1 exposes the
MSRs to L2, but for that to work in any sane capacity, L1 would need to
pass through IRQs to L2 as well, and IRQs must be intercepted to enable
virtual interrupt delivery.  I.e. exposing Auto EOI to L2 and enabling
VID for L2 are, for all intents and purposes, mutually exclusive.

Lack of dynamic toggling is also why this scenario is all but impossible
to encounter in KVM's current form.  But a future patch will pend an
APICv update request _during_ vCPU creation to plug a race where a vCPU
that's being created doesn't get included in the "all vCPUs request"
because it's not yet visible to other vCPUs.  If userspaces restores L2
after VM creation (hello, KVM selftests), the first KVM_RUN will occur
while L2 is active and thus service the APICv update request made during
VM creation.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220420013732.3308816-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled

Set the DISABLE inhibit, not the ABSENT inhibit, if APICv is disabled via
module param. A recent refactoring to add a wrapper for setting/clearing
inhibits unintentionally changed the flag, probably due to a copy+paste
goof.

Fixes: 4f4c4a3ee53c ("KVM: x86: Trace all APICv inhibit changes and capture overall status")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220420013732.3308816-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref

Initialize debugfs_entry to its semi-magical -ENOENT value when the VM
is created.  KVM's teardown when VM creation fails is kludgy and calls
kvm_uevent_notify_change() and kvm_destroy_vm_debugfs() even if KVM never
attempted kvm_create_vm_debugfs().  Because debugfs_entry is zero
initialized, the IS_ERR() checks pass and KVM derefs a NULL pointer.

  BUG: kernel NULL pointer dereference, address: 0000000000000018
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 1068b1067 P4D 1068b1067 PUD 1068b0067 PMD 0
  Oops: 0000 [#1] SMP
  CPU: 0 PID: 871 Comm: repro Not tainted 5.18.0-rc1+ #825
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:__dentry_path+0x7b/0x130
  Call Trace:
   <TASK>
   dentry_path_raw+0x42/0x70
   kvm_uevent_notify_change.part.0+0x10c/0x200 [kvm]
   kvm_put_kvm+0x63/0x2b0 [kvm]
   kvm_dev_ioctl+0x43a/0x920 [kvm]
   __x64_sys_ioctl+0x83/0xb0
   do_syscall_64+0x31/0x50
   entry_SYSCALL_64_after_hwframe+0x44/0xae
   </TASK>
  Modules linked in: kvm_intel kvm irqbypass

Fixes: a44a4cc1c969 ("KVM: Don't create VM debugfs files outside of the VM directory")
Cc: stable@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@google.com>
Reported-by: syzbot+df6fbbd2ee39f21289ef@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20220415004622.2207751-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused

Add wrappers to acquire/release KVM's SRCU lock when stashing the index
in vcpu->src_idx, along with rudimentary detection of illegal usage,
e.g. re-acquiring SRCU and thus overwriting vcpu->src_idx. Because the
SRCU index is (currently) either 0 or 1, illegal nesting bugs can go
unnoticed for quite some time and only cause problems when the nested
lock happens to get a different index.

Wrap the WARNs in PROVE_RCU=y, and make them ONCE, otherwise KVM will
likely yell so loudly that it will bring the kernel to its knees.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220415004343.2203171-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy

Use the generic kvm_vcpu's srcu_idx instead of using an indentical field
in RISC-V's version of kvm_vcpu_arch. Generic KVM very intentionally
does not touch vcpu->srcu_idx, i.e. there's zero chance of running afoul
of common code.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220415004343.2203171-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()

Don't re-acquire SRCU in complete_emulated_io() now that KVM acquires the
lock in kvm_arch_vcpu_ioctl_run(). More importantly, don't overwrite
vcpu->srcu_idx. If the index acquired by complete_emulated_io() differs
from the one acquired by kvm_arch_vcpu_ioctl_run(), KVM will effectively
leak a lock and hang if/when synchronize_srcu() is invoked for the
relevant grace period.

Fixes: 8d25b7beca7e ("KVM: x86: pull kvm->srcu read-side to kvm_arch_vcpu_ioctl_run")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220415004343.2203171-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-riscv-fixes-5.18-2' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 5.18, take #2

- Remove 's' & 'u' as valid ISA extension

- Do not allow disabling the base extensions 'i'/'m'/'a'/'c'

RISC-V: KVM: Restrict the extensions that can be disabled

Currently, the config isa register allows us to disable all allowed
single letter ISA extensions. It shouldn't be the case as vmm shouldn't
be able to disable base extensions (imac).

These extensions should always be enabled as long as they are enabled
in the host ISA.

Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Fixes: 92ad82002c39 ("RISC-V: KVM: Implement
KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls")

RISC-V: KVM: Remove 's' & 'u' as valid ISA extension

There are no ISA extension defined as 's' & 'u' in RISC-V specifications.
The misa register defines 's' & 'u' bit as Supervisor/User privilege mode
enabled. But it should not appear in the ISA extension in the device tree.

Remove those from the allowed ISA extension for kvm.

Fixes: a33c72faf2d7 ("RISC-V: KVM: Implement VCPU create, init and
destroy functions")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>

Linux 5.18-rc3

Merge tag 'for-linus-5.18-rc3-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixlet from Juergen Gross:
"A single cleanup patch for the Xen balloon driver"

* tag 'for-linus-5.18-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: don't use PV mode extra memory for zone device allocations

Merge tag 'x86-urgent-2022-04-17' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
"Two x86 fixes related to TSX:

   - Use either MSR_TSX_FORCE_ABORT or MSR_IA32_TSX_CTRL to disable TSX
     to cover all CPUs which allow to disable it.

   - Disable TSX development mode at boot so that a microcode update
     which provides TSX development mode does not suddenly make the
     system vulnerable to TSX Asynchronous Abort"

* tag 'x86-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsx: Disable TSX development mode at boot
  x86/tsx: Use MSR_TSX_CTRL to clear CPUID bits

Merge tag 'timers-urgent-2022-04-17' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
"A small set of fixes for the timers core:

   - Fix the warning condition in __run_timers() which does not take
     into account that a CPU base (especially the deferrable base) never
     has a timer armed on it and therefore the next_expiry value can
     become stale.

   - Replace a WARN_ON() in the NOHZ code with a WARN_ON_ONCE() to
     prevent endless spam in dmesg.

   - Remove the double star from a comment which is not meant to be in
     kernel-doc format"

* tag 'timers-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/sched: Fix non-kernel-doc comment
  tick/nohz: Use WARN_ON_ONCE() to prevent console saturation
  timers: Fix warning condition in __run_timers()

Merge tag 'smp-urgent-2022-04-17' of git://git./linux/kernel/git/tip/tip

Pull SMP fixes from Thomas Gleixner:
"Two fixes for the SMP core:

   - Make the warning condition in flush_smp_call_function_queue()
     correct, which checked a just emptied list head for being empty
     instead of validating that there was no pending entry on the
     offlined CPU at all.

   - The @cpu member of struct cpuhp_cpu_state is initialized when the
     CPU hotplug thread for the upcoming CPU is created. That's too late
     because the creation of the thread can fail and then the following
     rollback operates on CPU0. Get rid of the CPU member and hand the
     CPU number to the involved functions directly"

* tag 'smp-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Remove the 'cpu' member of cpuhp_cpu_state
  smp: Fix offline cpu check in flush_smp_call_function_queue()

Merge tag 'irq-urgent-2022-04-17' of git://git./linux/kernel/git/tip/tip

Pull irq fix from Thomas Gleixner:
"A single fix for the interrupt affinity spreading logic to take into
  account that there can be an imbalance between present and possible
  CPUs, which causes already assigned bits to be overwritten"

* tag 'irq-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/affinity: Consider that CPUs on nodes can be unbalanced

Merge tag 'for-v5.18-rc' of git://git./linux/kernel/git/sre/linux-power-supply

Pull power supply fixes from Sebastian Reichel:

- Fix a regression with battery data failing to load from DT

* tag 'for-v5.18-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: Reset err after not finding static battery
power: supply: samsung-sdi-battery: Add missing charge restart voltages

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"Regular set of fixes for drivers and the dev-interface"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: ismt: Fix undefined behavior due to shift overflowing the constant
  i2c: dev: Force case user pointers in compat_i2cdev_ioctl()
  i2c: dev: check return value when calling dev_set_name()
  i2c: qcom-geni: Use dev_err_probe() for GPI DMA error
  i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit
  i2c: pasemi: Wait for write xfers to finish

Merge tag 'devicetree-fixes-for-5.18-2' of git://git./linux/kernel/git/robh/linux

Pull devicetree fixes from Rob Herring:

- Fix scalar property schemas with array constraints

- Fix 'enum' lists with duplicate entries

- Fix incomplete if/then/else schemas

- Add Renesas RZ/V2L SoC support to Mali Bifrost binding

- Maintainers update for Marvell irqchip

* tag 'devicetree-fixes-for-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: display: panel-timing: Define a single type for properties
  dt-bindings: Fix array constraints on scalar properties
  dt-bindings: gpu: mali-bifrost: Document RZ/V2L SoC
  dt-bindings: net: snps: remove duplicate name
  dt-bindings: Fix 'enum' lists with duplicate entries
  dt-bindings: irqchip: mrvl,intc: refresh maintainers
  dt-bindings: Fix incomplete if/then/else schemas
  dt-bindings: power: renesas,apmu: Fix cpus property limits
  dt-bindings: extcon: maxim,max77843: fix ports type

Merge tag 'gpio-fixes-for-v5.18-rc3' of git://git./linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:
"A single fix for gpio-sim and two patches for GPIO ACPI pulled from
  Andy:

   - fix the set/get_multiple() callbacks in gpio-sim

   - use correct format characters in gpiolib-acpi

   - use an unsigned type for pins in gpiolib-acpi"

* tag 'gpio-fixes-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: sim: fix setting and getting multiple lines
  gpiolib: acpi: Convert type for pin to be unsigned
  gpiolib: acpi: use correct format characters

Merge tag 'soc-fixes-5.18-2' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"There are a number of SoC bugfixes that came in since the merge
  window, and more of them are already pending.

  This batch includes:

   - A boot time regression fix for davinci that triggered on
     multi_v5_defconfig when booting any platform

   - Defconfig updates to address removed features, changed symbol names
     or dependencies, for gemini, ux500, and pxa

   - Email address changes for Krzysztof Kozlowski

   - Build warning fixes for ep93xx and iop32x

   - Devicetree warning fixes across many platforms

   - Minor bugfixes for the reset controller, memory controller and SCMI
     firmware subsystems plus the versatile-express board"

* tag 'soc-fixes-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
  ARM: config: Update Gemini defconfig
  arm64: dts: qcom/sdm845-shift-axolotl: Fix boolean properties with values
  ARM: dts: align SPI NOR node name with dtschema
  ARM: dts: Fix more boolean properties with values
  arm/arm64: dts: qcom: Fix boolean properties with values
  arm64: dts: imx: Fix imx8*-var-som touchscreen property sizes
  arm: dts: imx: Fix boolean properties with values
  arm64: dts: tegra: Fix boolean properties with values
  arm: dts: at91: Fix boolean properties with values
  arm: configs: imote2: Drop defconfig as board support dropped.
  ep93xx: clock: Don't use plain integer as NULL pointer
  ep93xx: clock: Fix UAF in ep93xx_clk_register_gate()
  ARM: vexpress/spc: Fix all the kernel-doc build warnings
  ARM: vexpress/spc: Fix kernel-doc build warning for ve_spc_cpu_in_wfi
  ARM: config: u8500: Re-enable AB8500 battery charging
  ARM: config: u8500: Add some common hardware
  memory: fsl_ifc: populate child nodes of buses and mfd devices
  ARM: config: Refresh U8500 defconfig
  firmware: arm_scmi: Fix sparse warnings in OPTEE transport driver
  firmware: arm_scmi: Replace zero-length array with flexible-array member
  ...

Merge tag 'random-5.18-rc3-for-linus' of git://git./linux/kernel/git/crng/random

Pull random number generator fixes from Jason Donenfeld:

- Per your suggestion, random reads now won't fail if there's a page
   fault after some non-zero amount of data has been read, which makes
   the behavior consistent with all other reads in the kernel.

- Rather than an inconsistent mix of random_get_entropy() returning an
   unsigned long or a cycles_t, now it just returns an unsigned long.

- A memcpy() was replaced with an memmove(), because the addresses are
   sometimes overlapping. In practice the destination is always before
   the source, so not really an issue, but better to be correct than
   not.

* tag 'random-5.18-rc3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  random: use memmove instead of memcpy for remaining 32 bytes
  random: make random_get_entropy() return an unsigned long
  random: allow partial reads if later user copies fail

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"13 fixes, all in drivers.

  The most extensive changes are in the iscsi series (affecting drivers
  qedi, cxgbi and bnx2i), the next most is scsi_debug, but that's just a
  simple revert and then minor updates to pm80xx"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: iscsi: MAINTAINERS: Add Mike Christie as co-maintainer
  scsi: qedi: Fix failed disconnect handling
  scsi: iscsi: Fix NOP handling during conn recovery
  scsi: iscsi: Merge suspend fields
  scsi: iscsi: Fix unbound endpoint error handling
  scsi: iscsi: Fix conn cleanup and stop race during iscsid restart
  scsi: iscsi: Fix endpoint reuse regression
  scsi: iscsi: Release endpoint ID when its freed
  scsi: iscsi: Fix offload conn cleanup when iscsid restarts
  scsi: iscsi: Move iscsi_ep_disconnect()
  scsi: pm80xx: Enable upper inbound, outbound queues
  scsi: pm80xx: Mask and unmask upper interrupt vectors 32-63
  Revert "scsi: scsi_debug: Address races following module load"

Merge tag 'intel-gpio-v5.18-2' of gitolite.pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-current

intel-gpio for v5.18-2

* Couple of fixes related to handling unsigned value of the pin from ACPI

gpiolib:
- acpi: Convert type for pin to be unsigned
- acpi: use correct format characters

Merge tag 'dma-mapping-5.18-2' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fix from Christoph Hellwig:

- avoid a double memory copy for swiotlb (Chao Gao)

* tag 'dma-mapping-5.18-2' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: avoid redundant memory sync for swiotlb

random: use memmove instead of memcpy for remaining 32 bytes

In order to immediately overwrite the old key on the stack, before
servicing a userspace request for bytes, we use the remaining 32 bytes
of block 0 as the key. This means moving indices 8,9,a,b,c,d,e,f ->
4,5,6,7,8,9,a,b. Since 4 < 8, for the kernel implementations of
memcpy(), this doesn't actually appear to be a problem in practice. But
relying on that characteristic seems a bit brittle. So let's change that
to a proper memmove(), which is the by-the-books way of handling
overlapping memory copies.

Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"14 patches.

  Subsystems affected by this patch series: MAINTAINERS, binfmt, and
  mm (tmpfs, secretmem, kasan, kfence, pagealloc, zram, compaction,
  hugetlb, vmalloc, and kmemleak)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: kmemleak: take a full lowmem check in kmemleak_*_phys()
  mm/vmalloc: fix spinning drain_vmap_work after reading from /proc/vmcore
  revert "fs/binfmt_elf: use PT_LOAD p_align values for static PIE"
  revert "fs/binfmt_elf: fix PT_LOAD p_align values for loaders"
  hugetlb: do not demote poisoned hugetlb pages
  mm: compaction: fix compiler warning when CONFIG_COMPACTION=n
  mm: fix unexpected zeroed page mapping with zram swap
  mm, page_alloc: fix build_zonerefs_node()
  mm, kfence: support kmem_dump_obj() for KFENCE objects
  kasan: fix hw tags enablement when KUNIT tests are disabled
  irq_work: use kasan_record_aux_stack_noalloc() record callstack
  mm/secretmem: fix panic when growing a memfd_secret
  tmpfs: fix regressions from wider use of ZERO_PAGE
  MAINTAINERS: Broadcom internal lists aren't maintainers

Merge tag 'for-5.18/dm-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

- Fix memory corruption in DM integrity target when tag_size is less
   than digest size.

- Fix DM multipath's historical-service-time path selector to not use
   sched_clock() and ktime_get_ns(); only use ktime_get_ns().

- Fix dm_io->orig_bio NULL pointer dereference in dm_zone_map_bio() due
   to 5.18 changes that overlooked DM zone's use of ->orig_bio

- Fix for regression that broke the use of dm_accept_partial_bio() for
   "abnormal" IO (e.g. WRITE ZEROES) that does not need duplicate bios

- Fix DM's issuing of empty flush bio so that it's size is 0.

* tag 'for-5.18/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: fix bio length of empty flush
  dm: allow dm_accept_partial_bio() for dm_io without duplicate bios
  dm zone: fix NULL pointer dereference in dm_zone_map_bio
  dm mpath: only use ktime_get_ns() in historical selector
  dm integrity: fix memory corruption when tag_size is less than digest size

mm: kmemleak: take a full lowmem check in kmemleak_*_phys()

The kmemleak_*_phys() apis do not check the address for lowmem's min
boundary, while the caller may pass an address below lowmem, which will
trigger an oops:

  # echo scan > /sys/kernel/debug/kmemleak
  Unable to handle kernel paging request at virtual address ff5fffffffe00000
  Oops [#1]
  Modules linked in:
  CPU: 2 PID: 134 Comm: bash Not tainted 5.18.0-rc1-next-20220407 #33
  Hardware name: riscv-virtio,qemu (DT)
  epc : scan_block+0x74/0x15c
   ra : scan_block+0x72/0x15c
  epc : ffffffff801e5806 ra : ffffffff801e5804 sp : ff200000104abc30
   gp : ffffffff815cd4e8 tp : ff60000004cfa340 t0 : 0000000000000200
   t1 : 00aaaaaac23954cc t2 : 00000000000003ff s0 : ff200000104abc90
   s1 : ffffffff81b0ff28 a0 : 0000000000000000 a1 : ff5fffffffe01000
   a2 : ffffffff81b0ff28 a3 : 0000000000000002 a4 : 0000000000000001
   a5 : 0000000000000000 a6 : ff200000104abd7c a7 : 0000000000000005
   s2 : ff5fffffffe00ff9 s3 : ffffffff815cd998 s4 : ffffffff815d0e90
   s5 : ffffffff81b0ff28 s6 : 0000000000000020 s7 : ffffffff815d0eb0
   s8 : ffffffffffffffff s9 : ff5fffffffe00000 s10: ff5fffffffe01000
   s11: 0000000000000022 t3 : 00ffffffaa17db4c t4 : 000000000000000f
   t5 : 0000000000000001 t6 : 0000000000000000
  status: 0000000000000100 badaddr: ff5fffffffe00000 cause: 000000000000000d
    scan_gray_list+0x12e/0x1a6
    kmemleak_scan+0x2aa/0x57e
    kmemleak_write+0x32a/0x40c
    full_proxy_write+0x56/0x82
    vfs_write+0xa6/0x2a6
    ksys_write+0x6c/0xe2
    sys_write+0x22/0x2a
    ret_from_syscall+0x0/0x2

The callers may not quite know the actual address they pass(e.g. from
devicetree).  So the kmemleak_*_phys() apis should guarantee the address
they finally use is in lowmem range, so check the address for lowmem's
min boundary.

Link: https://lkml.kernel.org/r/20220413122925.33856-1-patrick.wang.shcn@gmail.com
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc: fix spinning drain_vmap_work after reading from /proc/vmcore

Commit 3ee48b6af49c ("mm, x86: Saving vmcore with non-lazy freeing of
vmas") introduced set_iounmap_nonlazy(), which sets vmap_lazy_nr to
lazy_max_pages() + 1, ensuring that any future vunmaps() immediately
purge the vmap areas instead of doing it lazily.

Commit 690467c81b1a ("mm/vmalloc: Move draining areas out of caller
context") moved the purging from the vunmap() caller to a worker thread.
Unfortunately, set_iounmap_nonlazy() can cause the worker thread to spin
(possibly forever).  For example, consider the following scenario:

1. Thread reads from /proc/vmcore. This eventually calls
    __copy_oldmem_page() -> set_iounmap_nonlazy(), which sets
    vmap_lazy_nr to lazy_max_pages() + 1.

2. Then it calls free_vmap_area_noflush() (via iounmap()), which adds 2
    pages (one page plus the guard page) to the purge list and
    vmap_lazy_nr. vmap_lazy_nr is now lazy_max_pages() + 3, so the
    drain_vmap_work is scheduled.

3. Thread returns from the kernel and is scheduled out.

4. Worker thread is scheduled in and calls drain_vmap_area_work(). It
    frees the 2 pages on the purge list. vmap_lazy_nr is now
    lazy_max_pages() + 1.

5. This is still over the threshold, so it tries to purge areas again,
    but doesn't find anything.

6. Repeat 5.

If the system is running with only one CPU (which is typicial for kdump)
and preemption is disabled, then this will never make forward progress:
there aren't any more pages to purge, so it hangs.  If there is more
than one CPU or preemption is enabled, then the worker thread will spin
forever in the background.  (Note that if there were already pages to be
purged at the time that set_iounmap_nonlazy() was called, this bug is
avoided.)

This can be reproduced with anything that reads from /proc/vmcore
multiple times.  E.g., vmcore-dmesg /proc/vmcore.

It turns out that improvements to vmap() over the years have obsoleted
the need for this "optimization".  I benchmarked `dd if=/proc/vmcore
of=/dev/null` with 4k and 1M read sizes on a system with a 32GB vmcore.
The test was run on 5.17, 5.18-rc1 with a fix that avoided the hang, and
5.18-rc1 with set_iounmap_nonlazy() removed entirely:

    |5.17  |5.18+fix|5.18+removal
  4k|40.86s|  40.09s|      26.73s
  1M|24.47s|  23.98s|      21.84s

The removal was the fastest (by a wide margin with 4k reads).  This
patch removes set_iounmap_nonlazy().

Link: https://lkml.kernel.org/r/52f819991051f9b865e9ce25605509bfdbacadcd.1649277321.git.osandov@fb.com
Fixes: 690467c81b1a  ("mm/vmalloc: Move draining areas out of caller context")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

revert "fs/binfmt_elf: use PT_LOAD p_align values for static PIE"

Despite Mike's attempted fix (925346c129da117122), regressions reports
continue:

  https://lore.kernel.org/lkml/cb5b81bd-9882-e5dc-cd22-54bdbaaefbbc@leemhuis.info/
  https://bugzilla.kernel.org/show_bug.cgi?id=215720
  https://lkml.kernel.org/r/b685f3d0-da34-531d-1aa9-479accd3e21b@leemhuis.info

So revert this patch.

Fixes: 9630f0d60fec ("fs/binfmt_elf: use PT_LOAD p_align values for static PIE")
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Chris Kennelly <ckennelly@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fangrui Song <maskray@google.com>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

revert "fs/binfmt_elf: fix PT_LOAD p_align values for loaders"

Commit 925346c129da11 ("fs/binfmt_elf: fix PT_LOAD p_align values for
loaders") was an attempt to fix regressions due to 9630f0d60fec5f
("fs/binfmt_elf: use PT_LOAD p_align values for static PIE").

But regressionss continue to be reported:

  https://lore.kernel.org/lkml/cb5b81bd-9882-e5dc-cd22-54bdbaaefbbc@leemhuis.info/
  https://bugzilla.kernel.org/show_bug.cgi?id=215720
  https://lkml.kernel.org/r/b685f3d0-da34-531d-1aa9-479accd3e21b@leemhuis.info

This patch reverts the fix, so the original can also be reverted.

Fixes: 925346c129da11 ("fs/binfmt_elf: fix PT_LOAD p_align values for loaders")
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Chris Kennelly <ckennelly@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: do not demote poisoned hugetlb pages

It is possible for poisoned hugetlb pages to reside on the free lists.
The huge page allocation routines which dequeue entries from the free
lists make a point of avoiding poisoned pages.  There is no such check
and avoidance in the demote code path.

If a hugetlb page on the is on a free list, poison will only be set in
the head page rather then the page with the actual error.  If such a
page is demoted, then the poison flag may follow the wrong page.  A page
without error could have poison set, and a page with poison could not
have the flag set.

Check for poison before attempting to demote a hugetlb page.  Also,
return -EBUSY to the caller if only poisoned pages are on the free list.

Link: https://lkml.kernel.org/r/20220307215707.50916-1-mike.kravetz@oracle.com
Fixes: 8531fc6f52f5 ("hugetlb: add hugetlb demote page support")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: compaction: fix compiler warning when CONFIG_COMPACTION=n

The below warning is reported when CONFIG_COMPACTION=n:

   mm/compaction.c:56:27: warning: 'HPAGE_FRAG_CHECK_INTERVAL_MSEC' defined but not used [-Wunused-const-variable=]
      56 | static const unsigned int HPAGE_FRAG_CHECK_INTERVAL_MSEC = 500;
         |                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix it by moving 'HPAGE_FRAG_CHECK_INTERVAL_MSEC' under
CONFIG_COMPACTION defconfig.

Also since this is just a 'static const int' type, use #define for it.

Link: https://lkml.kernel.org/r/1647608518-20924-1-git-send-email-quic_charante@quicinc.com
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Nitin Gupta <nigupta@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix unexpected zeroed page mapping with zram swap

Two processes under CLONE_VM cloning, user process can be corrupted by
seeing zeroed page unexpectedly.

      CPU A                        CPU B

  do_swap_page                do_swap_page
  SWP_SYNCHRONOUS_IO path     SWP_SYNCHRONOUS_IO path
  swap_readpage valid data
    swap_slot_free_notify
      delete zram entry
                              swap_readpage zeroed(invalid) data
                              pte_lock
                              map the *zero data* to userspace
                              pte_unlock
  pte_lock
  if (!pte_same)
    goto out_nomap;
  pte_unlock
  return and next refault will
  read zeroed data

The swap_slot_free_notify is bogus for CLONE_VM case since it doesn't
increase the refcount of swap slot at copy_mm so it couldn't catch up
whether it's safe or not to discard data from backing device.  In the
case, only the lock it could rely on to synchronize swap slot freeing is
page table lock.  Thus, this patch gets rid of the swap_slot_free_notify
function.  With this patch, CPU A will see correct data.

      CPU A                        CPU B

  do_swap_page                do_swap_page
  SWP_SYNCHRONOUS_IO path     SWP_SYNCHRONOUS_IO path
                              swap_readpage original data
                              pte_lock
                              map the original data
                              swap_free
                                swap_range_free
                                  bd_disk->fops->swap_slot_free_notify
  swap_readpage read zeroed data
                              pte_unlock
  pte_lock
  if (!pte_same)
    goto out_nomap;
  pte_unlock
  return
  on next refault will see mapped data by CPU B

The concern of the patch would increase memory consumption since it
could keep wasted memory with compressed form in zram as well as
uncompressed form in address space.  However, most of cases of zram uses
no readahead and do_swap_page is followed by swap_free so it will free
the compressed form from in zram quickly.

Link: https://lkml.kernel.org/r/YjTVVxIAsnKAXjTd@google.com
Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device")
Reported-by: Ivan Babrou <ivan@cloudflare.com>
Tested-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, page_alloc: fix build_zonerefs_node()

Since commit 6aa303defb74 ("mm, vmscan: only allocate and reclaim from
zones with pages managed by the buddy allocator") only zones with free
memory are included in a built zonelist.  This is problematic when e.g.
all memory of a zone has been ballooned out when zonelists are being
rebuilt.

The decision whether to rebuild the zonelists when onlining new memory
is done based on populated_zone() returning 0 for the zone the memory
will be added to.  The new zone is added to the zonelists only, if it
has free memory pages (managed_zone() returns a non-zero value) after
the memory has been onlined.  This implies, that onlining memory will
always free the added pages to the allocator immediately, but this is
not true in all cases: when e.g. running as a Xen guest the onlined new
memory will be added only to the ballooned memory list, it will be freed
only when the guest is being ballooned up afterwards.

Another problem with using managed_zone() for the decision whether a
zone is being added to the zonelists is, that a zone with all memory
used will in fact be removed from all zonelists in case the zonelists
happen to be rebuilt.

Use populated_zone() when building a zonelist as it has been done before
that commit.

There was a report that QubesOS (based on Xen) is hitting this problem.
Xen has switched to use the zone device functionality in kernel 5.9 and
QubesOS wants to use memory hotplugging for guests in order to be able
to start a guest with minimal memory and expand it as needed.  This was
the report leading to the patch.

Link: https://lkml.kernel.org/r/20220407120637.9035-1-jgross@suse.com
Fixes: 6aa303defb74 ("mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, kfence: support kmem_dump_obj() for KFENCE objects

Calling kmem_obj_info() via kmem_dump_obj() on KFENCE objects has been
producing garbage data due to the object not actually being maintained
by SLAB or SLUB.

Fix this by implementing __kfence_obj_info() that copies relevant
information to struct kmem_obj_info when the object was allocated by
KFENCE; this is called by a common kmem_obj_info(), which also calls the
slab/slub/slob specific variant now called __kmem_obj_info().

For completeness, kmem_dump_obj() now displays if the object was
allocated by KFENCE.

Link: https://lore.kernel.org/all/20220323090520.GG16885@xsang-OptiPlex-9020/
Link: https://lkml.kernel.org/r/20220406131558.3558585-1-elver@google.com
Fixes: b89fb5ef0ce6 ("mm, kfence: insert KFENCE hooks for SLUB")
Fixes: d3fb45f370d9 ("mm, kfence: insert KFENCE hooks for SLAB")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz> [slab]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: fix hw tags enablement when KUNIT tests are disabled

Kasan enables hw tags via kasan_enable_tagging() which based on the mode
passed via kernel command line selects the correct hw backend.
kasan_enable_tagging() is meant to be invoked indirectly via the cpu
features framework of the architectures that support these backends.
Currently the invocation of this function is guarded by
CONFIG_KASAN_KUNIT_TEST which allows the enablement of the correct backend
only when KUNIT tests are enabled in the kernel.

This inconsistency was introduced in commit:

ed6d74446cbf ("kasan: test: support async (again) and asymm modes for HW_TAGS")

... and prevents to enable MTE on arm64 when KUNIT tests for kasan hw_tags are
disabled.

Fix the issue making sure that the CONFIG_KASAN_KUNIT_TEST guard does not
prevent the correct invocation of kasan_enable_tagging().

Link: https://lkml.kernel.org/r/20220408124323.10028-1-vincenzo.frascino@arm.com
Fixes: ed6d74446cbf ("kasan: test: support async (again) and asymm modes for HW_TAGS")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

irq_work: use kasan_record_aux_stack_noalloc() record callstack

On PREEMPT_RT kernel and KASAN is enabled.  the kasan_record_aux_stack()
may call alloc_pages(), and the rt-spinlock will be acquired, if currently
in atomic context, will trigger warning:

  BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
  in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 239, name: bootlogd
  Preemption disabled at:
  [<ffffffffbab1a531>] rt_mutex_slowunlock+0xa1/0x4e0
  CPU: 3 PID: 239 Comm: bootlogd Tainted: G        W 5.17.1-rt17-yocto-preempt-rt+ #105
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
  Call Trace:
     __might_resched.cold+0x13b/0x173
     rt_spin_lock+0x5b/0xf0
     get_page_from_freelist+0x20c/0x1610
     __alloc_pages+0x25e/0x5e0
     __stack_depot_save+0x3c0/0x4a0
     kasan_save_stack+0x3a/0x50
     __kasan_record_aux_stack+0xb6/0xc0
     kasan_record_aux_stack+0xe/0x10
     irq_work_queue_on+0x6a/0x1c0
     pull_rt_task+0x631/0x6b0
     do_balance_callbacks+0x56/0x80
     __balance_callbacks+0x63/0x90
     rt_mutex_setprio+0x349/0x880
     rt_mutex_slowunlock+0x22a/0x4e0
     rt_spin_unlock+0x49/0x80
     uart_write+0x186/0x2b0
     do_output_char+0x2e9/0x3a0
     n_tty_write+0x306/0x800
     file_tty_write.isra.0+0x2af/0x450
     tty_write+0x22/0x30
     new_sync_write+0x27c/0x3a0
     vfs_write+0x3f7/0x5d0
     ksys_write+0xd9/0x180
     __x64_sys_write+0x43/0x50
     do_syscall_64+0x44/0x90
     entry_SYSCALL_64_after_hwframe+0x44/0xae

Fix it by using kasan_record_aux_stack_noalloc() to avoid the call to
alloc_pages().

Link: https://lkml.kernel.org/r/20220402142555.2699582-1-qiang1.zhang@intel.com
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/secretmem: fix panic when growing a memfd_secret

When one tries to grow an existing memfd_secret with ftruncate, one gets
a panic [1].  For example, doing the following reliably induces the
panic:

    fd = memfd_secret();

    ftruncate(fd, 10);
    ptr = mmap(NULL, 10, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
    strcpy(ptr, "123456789");

    munmap(ptr, 10);
    ftruncate(fd, 20);

The basic reason for this is, when we grow with ftruncate, we call down
into simple_setattr, and then truncate_inode_pages_range, and eventually
we try to zero part of the memory.  The normal truncation code does this
via the direct map (i.e., it calls page_address() and hands that to
memset()).

For memfd_secret though, we specifically don't map our pages via the
direct map (i.e.  we call set_direct_map_invalid_noflush() on every
fault).  So the address returned by page_address() isn't useful, and
when we try to memset() with it we panic.

This patch avoids the panic by implementing a custom setattr for
memfd_secret, which detects resizes specifically (setting the size for
the first time works just fine, since there are no existing pages to try
to zero), and rejects them with EINVAL.

One could argue growing should be supported, but I think that will
require a significantly more lengthy change.  So, I propose a minimal
fix for the benefit of stable kernels, and then perhaps to extend
memfd_secret to support growing in a separate patch.

[1]:

  BUG: unable to handle page fault for address: ffffa0a889277028
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD afa01067 P4D afa01067 PUD 83f909067 PMD 83f8bf067 PTE 800ffffef6d88060
  Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
  CPU: 0 PID: 281 Comm: repro Not tainted 5.17.0-dbg-DEV #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
  RIP: 0010:memset_erms+0x9/0x10
  Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01
  RSP: 0018:ffffb932c09afbf0 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffffda63c4249dc0 RCX: 0000000000000fd8
  RDX: 0000000000000fd8 RSI: 0000000000000000 RDI: ffffa0a889277028
  RBP: ffffb932c09afc00 R08: 0000000000001000 R09: ffffa0a889277028
  R10: 0000000000020023 R11: 0000000000000000 R12: ffffda63c4249dc0
  R13: ffffa0a890d70d98 R14: 0000000000000028 R15: 0000000000000fd8
  FS:  00007f7294899580(0000) GS:ffffa0af9bc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffffa0a889277028 CR3: 0000000107ef6006 CR4: 0000000000370ef0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   ? zero_user_segments+0x82/0x190
   truncate_inode_partial_folio+0xd4/0x2a0
   truncate_inode_pages_range+0x380/0x830
   truncate_setsize+0x63/0x80
   simple_setattr+0x37/0x60
   notify_change+0x3d8/0x4d0
   do_sys_ftruncate+0x162/0x1d0
   __x64_sys_ftruncate+0x1c/0x20
   do_syscall_64+0x44/0xa0
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  Modules linked in: xhci_pci xhci_hcd virtio_net net_failover failover virtio_blk virtio_balloon uhci_hcd ohci_pci ohci_hcd evdev ehci_pci ehci_hcd 9pnet_virtio 9p netfs 9pnet
  CR2: ffffa0a889277028

[lkp@intel.com: secretmem_iops can be static]
Signed-off-by: kernel test robot <lkp@intel.com>
[axelrasmussen@google.com: return EINVAL]

Link: https://lkml.kernel.org/r/20220324210909.1843814-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20220412193023.279320-1-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tmpfs: fix regressions from wider use of ZERO_PAGE

Chuck Lever reported fsx-based xfstests generic 075 091 112 127 failing
when 5.18-rc1 NFS server exports tmpfs: bisected to recent tmpfs change.

Whilst nfsd_splice_action() does contain some questionable handling of
repeated pages, and Chuck was able to work around there, history from
Mark Hemment makes clear that there might be similar dangers elsewhere:
it was not a good idea for me to pass ZERO_PAGE down to unknown actors.

Revert shmem_file_read_iter() to using ZERO_PAGE for holes only when
iter_is_iovec(); in other cases, use the more natural iov_iter_zero()
instead of copy_page_to_iter().

We would use iov_iter_zero() throughout, but the x86 clear_user() is not
nearly so well optimized as copy to user (dd of 1T sparse tmpfs file
takes 57 seconds rather than 44 seconds).

And now pagecache_init() does not need to SetPageUptodate(ZERO_PAGE(0)):
which had caused boot failure on arm noMMU STM32F7 and STM32H7 boards

Link: https://lkml.kernel.org/r/9a978571-8648-e830-5735-1f4748ce2e30@google.com
Fixes: 56a8c8eb1eaf ("tmpfs: do not allocate pages on read")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Patrice CHOTARD <patrice.chotard@foss.st.com>
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Tested-by: Chuck Lever III <chuck.lever@oracle.com>
Cc: Mark Hemment <markhemm@googlemail.com>
Cc: Patrice CHOTARD <patrice.chotard@foss.st.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Lukas Czerner <lczerner@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: Broadcom internal lists aren't maintainers

Convert the broadcom internal list M: and L: entries to R: as exploder
email addresses are neither maintainers nor mailing lists.

Reorder the entries as necessary.

Link: https://lkml.kernel.org/r/04eb301f5b3adbefdd78e76657eff0acb3e3d87f.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i2c: ismt: Fix undefined behavior due to shift overflowing the constant

Fix:

  drivers/i2c/busses/i2c-ismt.c: In function ‘ismt_hw_init’:
  drivers/i2c/busses/i2c-ismt.c:770:2: error: case label does not reduce to an integer constant
    case ISMT_SPGT_SPD_400K:
    ^~~~
  drivers/i2c/busses/i2c-ismt.c:773:2: error: case label does not reduce to an integer constant
    case ISMT_SPGT_SPD_1M:
    ^~~~

See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.

Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: dev: Force case user pointers in compat_i2cdev_ioctl()

Sparse has warned us about wrong address space for user pointers:

  i2c-dev.c:561:50: warning: incorrect type in initializer (different address spaces)
  i2c-dev.c:561:50:    expected unsigned char [usertype] *buf
  i2c-dev.c:561:50:    got void [noderef] __user *

Force cast the pointer to (__u8 *) that is used by I²C core code.

Note, this is an additional fix to the previously addressed similar issue
in the I2C_RDWR case in the same function.

Fixes: 3265a7e6b41b ("i2c: dev: Add __user annotation")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: dev: check return value when calling dev_set_name()

If dev_set_name() fails, the dev_name() is null, check the return
value of dev_set_name() to avoid the null-ptr-deref.

Fixes: 1413ef638aba ("i2c: dev: Fix the race between the release of i2c_dev and cdev")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: qcom-geni: Use dev_err_probe() for GPI DMA error

The GPI DMA engine driver can be compiled as a module, in which case the
likely probe deferral "error" shows up in the kernel log. Switch to
using dev_err_probe() to silence this warning and to ensure that
"devices_deferred" in debugfs carries this information.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit

The i.MX8MP Mask Set Errata for Mask 1P33A, Rev. 2.0 has description of
errata ERR007805 as below. This errata is found on all MX8M{M,N,P,Q},
MX7{S,D}, MX6{UL{,L,Z},S{,LL,X},S,D,DL,Q,DP,QP} . MX7ULP, MX8Q, MX8X
are not affected. MX53 and older status is unknown, as the errata
first appears in MX6 errata sheets from 2016 and the latest errata
sheet for MX53 is from 2015. Older SoC errata sheets predate the
MX53 errata sheet. MX8ULP and MX9 status is unknown as the errata
sheet is not available yet.

"
ERR007805 I2C: When the I2C clock speed is configured for 400 kHz,
the SCL low period violates the I2C spec of 1.3 uS min

Description: When the I2C module is programmed to operate at the
maximum clock speed of 400 kHz (as defined by the I2C spec), the SCL
clock low period violates the I2C spec of 1.3 uS min. The user must
reduce the clock speed to obtain the SCL low time to meet the 1.3us
I2C minimum required. This behavior means the SoC is not compliant
to the I2C spec at 400kHz.

Workaround: To meet the clock low period requirement in fast speed
mode, SCL must be configured to 384KHz or less.
"

Implement the workaround by matching on the affected SoC specific
compatible strings and by limiting the maximum bus frequency in case
the SoC is affected.

Signed-off-by: Marek Vasut <marex@denx.de>
To: linux-i2c@vger.kernel.org
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: pasemi: Wait for write xfers to finish

Wait for completion of write transfers before returning from the driver.
At first sight it may seem advantageous to leave write transfers queued
for the controller to carry out on its own time, but there's a couple of
issues with it:

* Driver doesn't check for FIFO space.

* The queued writes can complete while the driver is in its I2C read
   transfer path which means it will get confused by the raising of
   XEN (the 'transaction ended' signal). This can cause a spurious
   ENODATA error due to premature reading of the MRXFIFO register.

Adding the wait fixes some unreliability issues with the driver. There's
some efficiency cost to it (especially with pasemi_smb_waitready doing
its polling), but that will be alleviated once the driver receives
interrupt support.

Fixes: beb58aa39e6e ("i2c: PA Semi SMBus driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

dm: fix bio length of empty flush

The commit 92986f6b4c8a ("dm: use bio_clone_fast in alloc_io/alloc_tio")
removed bio_clone_fast() call from alloc_tio() when ci->io->tio is
available. In this case, ci->bio is not copied to ci->io->tio.clone.
This is fine since init_clone_info() sets same values to ci->bio and
ci->io->tio.clone.

However, when incoming bios have REQ_PREFLUSH flag, __send_empty_flush()
prepares a zero length bio on stack and set it to ci->bio. At this time,
ci->io->tio.clone still keeps non-zero length. When alloc_tio() chooses
this ci->io->tio.clone as the bio to map, it is passed to targets as
non-empty flush bio. It causes bio length check failure in dm-zoned and
unexpected operation such as dm_accept_partial_bio() call.

To avoid the non-empty flush bio, set zero length to ci->io->tio.clone
in __send_empty_flush().

Fixes: 92986f6b4c8a ("dm: use bio_clone_fast in alloc_io/alloc_tio")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

Merge tag 'block-5.18-2022-04-15' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- Moving of lower_48_bits() to the block layer and a fix for the
   unaligned_be48 added with that originally (Alexander, Keith)

- Fix a bad WARN_ON() for trim size checking (Ming)

- A polled IO timeout fix for null_blk (Ming)

- Silence IO error printing for dead disks (Christoph)

- Compat mode range fix (Khazhismel)

- NVMe pull request via Christoph:
     - Tone down the error logging added this merge window a bit
       (Chaitanya Kulkarni)
     - Quirk devices with non-unique unique identifiers (Christoph)

* tag 'block-5.18-2022-04-15' of git://git.kernel.dk/linux-block:
  block: don't print I/O error warning for dead disks
  block/compat_ioctl: fix range check in BLKGETSIZE
  nvme-pci: disable namespace identifiers for Qemu controllers
  nvme-pci: disable namespace identifiers for the MAXIO MAP1002/1202
  nvme: add a quirk to disable namespace identifiers
  nvme: don't print verbose errors for internal passthrough requests
  block: null_blk: end timed out poll request
  block: fix offset/size check in bio_trim()
  asm-generic: fix __get_unaligned_be48() on 32 bit platforms
  block: move lower_48_bits() to block

Merge tag 'io_uring-5.18-2022-04-14' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:

- Ensure we check and -EINVAL any use of reserved or struct padding.

   Although we generally always do that, it's missed in two spots for
   resource updates, one for the ring fd registration from this merge
   window, and one for the extended arg. Make sure we have all of them
   handled. (Dylan)

- A few fixes for the deferred file assignment (me, Pavel)

- Add a feature flag for the deferred file assignment so apps can tell
   we handle it correctly (me)

- Fix a small perf regression with the current file position fix in
   this merge window (me)

* tag 'io_uring-5.18-2022-04-14' of git://git.kernel.dk/linux-block:
  io_uring: abort file assignment prior to assigning creds
  io_uring: fix poll error reporting
  io_uring: fix poll file assign deadlock
  io_uring: use right issue_flags for splice/tee
  io_uring: verify pad field is 0 in io_get_ext_arg
  io_uring: verify resv is 0 in ringfd register/unregister
  io_uring: verify that resv2 is 0 in io_uring_rsrc_update2
  io_uring: move io_uring_rsrc_update2 validation
  io_uring: fix assign file locking issue
  io_uring: stop using io_wq_work as an fd placeholder
  io_uring: move apoll->events cache
  io_uring: io_kiocb_update_pos() should not touch file for non -1 offset
  io_uring: flag the fact that linked file assignment is sane

Merge tag 'linux-kselftest-fixes-5.18-rc3' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
"A mqueue perf test memory leak bug fix.

  mq_perf_tests failed to call CPU_FREE to free memory allocated by
  CPU_SET"

* tag 'linux-kselftest-fixes-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  testing/selftests/mqueue: Fix mq_perf_tests to free the allocated cpu set

Merge tag 'perf-tools-fixes-for-v5.18-2022-04-14' of git://git./linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

- 'perf record --per-thread' mode doesn't have the CPU mask setup, so
   it can use it to figure out the number of mmaps, fix it.

- Fix segfault accessing sample_id xyarray out of bounds, noticed while
   using Intel PT where we have a dummy event to capture text poke perf
   metadata events and we mixup the set of CPUs specified by the user
   with the all CPUs map needed for text poke.

- Fix 'perf bench numa' to check if CPU used to bind task is online.

- Fix 'perf bench numa' usage of affinity for machines with more than
   1000 CPUs.

- Fix misleading add event PMU debug message, noticed while using the
  'intel_pt' PMU.

- Fix error check return value of hashmap__new() in 'perf stat', it
   must use IS_ERR().

* tag 'perf-tools-fixes-for-v5.18-2022-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf bench: Fix numa bench to fix usage of affinity for machines with #CPUs > 1K
  perf bench: Fix numa testcase to check if CPU used to bind task is online
  perf record: Fix per-thread option
  perf tools: Fix segfault accessing sample_id xyarray
  perf stat: Fix error check return value of hashmap__new(), must use IS_ERR()
  perf tools: Fix misleading add event PMU debug message

Merge tag 'nvme-5.18-2022-04-15' of git://git.infradead.org/nvme into block-5.18

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 5.18

- tone down the error logging added this merge window a bit
   (Chaitanya Kulkarni)
- quirk devices with non-unique unique identifiers (me)"

* tag 'nvme-5.18-2022-04-15' of git://git.infradead.org/nvme:
  nvme-pci: disable namespace identifiers for Qemu controllers
  nvme-pci: disable namespace identifiers for the MAXIO MAP1002/1202
  nvme: add a quirk to disable namespace identifiers
  nvme: don't print verbose errors for internal passthrough requests

block: don't print I/O error warning for dead disks

When a disk has been marked dead, don't print warnings for I/O errors
as they are very much expected.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220323163815.1526998-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block/compat_ioctl: fix range check in BLKGETSIZE

kernel ulong and compat_ulong_t may not be same width. Use type directly
to eliminate mismatches.

This would result in truncation rather than EFBIG for 32bit mode for
large disks.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220414224056.2875681-1-khazhy@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvme-pci: disable namespace identifiers for Qemu controllers

Qemu unconditionally reports a UUID, which depending on the qemu version
is either all-null (which is incorrect but harmless) or contains a single
bit set for all controllers. In addition it can also optionally report
a eui64 which needs to be manually set. Disable namespace identifiers
for Qemu controlles entirely even if in some cases they could be set
correctly through manual intervention.

Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>

nvme-pci: disable namespace identifiers for the MAXIO MAP1002/1202

The MAXIO MAP1002/1202 controllers reports completely bogus Namespace
identifiers that even change after suspend cycles. Disable using
the Identifiers entirely.

Reported-by: 金韬 <me@kingtous.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: 金韬 <me@kingtous.cn>

nvme: add a quirk to disable namespace identifiers

Add a quirk to disable using and exporting namespace identifiers for
controllers where they are broken beyond repair.

The most directly visible problem with non-unique namespace identifiers
is that they break the /dev/disk/by-id/ links, with the link for a
supposedly unique identifier now pointing to one of multiple possible
namespaces that share the same ID, and a somewhat random selection of
which one actually shows up.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>

nvme: don't print verbose errors for internal passthrough requests

Use the RQF_QUIET flag to skip the newly added verbose error reporting,
and set the flag in __nvme_submit_sync_cmd, which is used for most
internal passthrough requests where we do expect errors (e.g. due to
probing for optional functionality). This is similar to what the SCSI
verbose error logging does.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Alan Adamson <alan.adamson@oracle.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

io_uring: abort file assignment prior to assigning creds

We need to either restore creds properly if we fail on the file
assignment, or just do the file assignment first instead. Let's do
the latter as it's simpler, should make no difference here for
file assignment.

Link: https://lore.kernel.org/lkml/000000000000a7edb305dca75a50@google.com/
Reported-by: syzbot+60c52ca98513a8760a91@syzkaller.appspotmail.com
Fixes: 6bf9c47a3989 ("io_uring: defer file assignment")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm: allow dm_accept_partial_bio() for dm_io without duplicate bios

The intent behind commit e6fc9f62ce6e ("dm: flag clones created by
__send_duplicate_bios") was to formally disallow the use of
dm_accept_partial_bio() where it simply isn't possible -- due to
constraint that multiple bios cannot meaningfully update a shared
tio->len_ptr.

But that commit went too far and disallowed the case where "abormal"
IO (e.g. WRITE_ZEROES) is only using a single bio. Fix this by
not marking a dm_io with a single dm_target_io (and bio), that happens
to be created by __send_duplicate_bios, as DM_TIO_IS_DUPLICATE_BIO.
Also remove 'unsigned *len' parameter from alloc_multiple_bios().

This commit fixes a dm_accept_partial_bio() BUG_ON() with dm-zoned
when a WRITE_ZEROES bio is issued.

Fixes: 655f3aad7aa4 ("dm: switch dm_target_io booleans over to proper flags")
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

Merge tag 'drm-fixes-2022-04-15' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Eggs season holidays are among us, and I think I'd expect some smaller
  pulls for two weeks then.

  This seems eerily quiet. One i915 fix, amdgpu has a bunch and msm. I
  didn't see a misc pull this week, so I expect that will catch up next
  week.

  i915:
   - Correct legacy mmap disabling to use GRAPHICS_VER_FULL

  msm:
   - system suspend fix
   - kzalloc return checks
   - misc display fix
   - iommu_present removal

  amdgpu:
   - Fix for alpha properly in pre-multiplied mode
   - Fix VCN 3.1.2 firmware name
   - Suspend/resume fix
   - Add a gfxoff quirk for Mac vega20 board
   - DCN 3.1.6 spread spectrum fix"

* tag 'drm-fixes-2022-04-15' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: remove dtbclk_ss compensation for dcn316
  drm/amdgpu: Enable gfxoff quirk on MacBook Pro
  drm/amdgpu: Ensure HDA function is suspended before ASIC reset
  drm/amdgpu: fix VCN 3.1.2 firmware name
  drm/amd/display: don't ignore alpha property on pre-multiplied mode
  drm/msm/gpu: Avoid -Wunused-function with !CONFIG_PM_SLEEP
  drm/msm/dp: add fail safe mode outside of event_mutex context
  drm/msm/dsi: Use connector directly in msm_dsi_manager_connector_init()
  drm/msm: Stop using iommu_present()
  drm/msm/mdp5: check the return of kzalloc()
  drm/msm: Fix range size vs end confusion
  drm/i915: Sunset igpu legacy mmap support based on GRAPHICS_VER_FULL
  drm/msm/dpu: Use indexed array initializer to prevent mismatches
  drm/msm/disp: check the return value of kzalloc()
  dt-bindings: display/msm: another fix for the dpu-qcm2290 example
  drm/msm: Add missing put_task_struct() in debugfs path
  drm/msm/gpu: Remove mutex from wait_event condition
  drm/msm/gpu: Park scheduler threads for system suspend
  drm/msm/gpu: Rename runtime suspend/resume functions

Merge tag 'vfio-v5.18-rc3' of https://github.com/awilliam/linux-vfio

Pull vfio fix from Alex Williamson:

- Fix VF token checking for vfio-pci variant drivers (Jason Gunthorpe)

* tag 'vfio-v5.18-rc3' of https://github.com/awilliam/linux-vfio:
vfio/pci: Fix vf_token mechanism when device-specific VF drivers are used

Merge tag '5.18-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:

- two fixes related to unmount

- symlink overflow fix

- minor netfs fix

- improved tracing for crediting (flow control)

* tag '5.18-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: verify that tcon is valid before dereference in cifs_kill_sb
  cifs: potential buffer overflow in handling symlinks
  cifs: Split the smb3_add_credits tracepoint
  cifs: release cached dentries only if mount is complete
  cifs: Check the IOCB_DIRECT flag, not O_DIRECT

VFS: filename_create(): fix incorrect intent.

When asked to create a path ending '/', but which is not to be a
directory (LOOKUP_DIRECTORY not set), filename_create() will never try
to create the file.  If it doesn't exist, -ENOENT is reported.

However, it still passes LOOKUP_CREATE|LOOKUP_EXCL to the filesystems
->lookup() function, even though there is no intent to create.  This is
misleading and can cause incorrect behaviour.

If you try

   ln -s foo /path/dir/

where 'dir' is a directory on an NFS filesystem which is not currently
known in the dcache, this will fail with ENOENT.

But as the name is not in the dcache, nfs_lookup gets called with
LOOKUP_CREATE|LOOKUP_EXCL and so it returns NULL without performing any
lookup, with the expectation that a subsequent call to create the target
will be made, and the lookup can be combined with the creation.  In the
case with a trailing '/' and no LOOKUP_DIRECTORY, that call is never
made.  Instead filename_create() sees that the dentry is not (yet)
positive and returns -ENOENT - even though the directory actually
exists.

So only set LOOKUP_CREATE|LOOKUP_EXCL if there really is an intent to
create, and use the absence of these flags to decide if -ENOENT should
be returned.

Note that filename_parentat() is only interested in LOOKUP_REVAL, so we
split that out and store it in 'reval_flag'.  __lookup_hash() then gets
reval_flag combined with whatever create flags were determined to be
needed.

Reviewed-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'amd-drm-fixes-5.18-2022-04-13' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.18-2022-04-13:

amdgpu:
- Fix for alpha properly in pre-multiplied mode
- Fix VCN 3.1.2 firmware name
- Suspend/resume fix
- Add a gfxoff quirk for Mac vega20 board
- DCN 3.1.6 spread spectrum fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414025821.5811-1-alexander.deucher@amd.com

dt-bindings: display: panel-timing: Define a single type for properties

It's not good practice to define multiple types for the same property, so
factor out the type reference making the properties always an uint32-array
with a length of 1 or 3 items.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20220413140016.3131013-1-robh@kernel.org

ARM: config: Update Gemini defconfig

The Gemini defconfig needs to be updated due to DSA driver
Kconfig changes in the v5.18 merge window:
CONFIG_NET_DSA_REALTEK_SMI is now behind
CONFIG_NET_DSA_REALTEK and the desired DSA switch need
to be selected explicitly with
CONFIG_NET_DSA_REALTEK_RTL8366RB.

Take this opportunity to update some other minor config
options:

- CONFIG_MARVELL_PHY moved around because of Kconfig
  changes.

- CONFIG_SENSORS_DRIVETEMP should be selected since is
  regulates the system critical alert temperature on
  some devices, which is nice if it is handled even
  if initramfs or root fails to mount.

Fixes: 319a70a5fea9 ("net: dsa: realtek-smi: move to subdirectory")
Fixes: 765c39a4fafe ("net: dsa: realtek: convert subdrivers into modules")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arm64: dts: qcom/sdm845-shift-axolotl: Fix boolean properties with values

Boolean properties in DT are present or not present and don't take a value.
A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't
matter.

It may have been intended that 0 values are false, but there is no change
in behavior with this patch.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Link: https://lore.kernel.org/r/20220407225254.2178644-1-robh@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: dts: align SPI NOR node name with dtschema

The node names should be generic and SPI NOR dtschema expects "flash".

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20220407143027.294678-1-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: dts: Fix more boolean properties with values

Boolean properties in DT are present or not present and don't take a value.
A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't
matter.

It may have been intended that 0 values are false, but there is no change
in behavior with this patch.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: "Benoît Cousson" <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Link: https://lore.kernel.org/r/20220407225107.2175958-1-robh@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ux500-defconfig-soc-v5.18' of git://git./linux/kernel/git/linusw/linux-nomadik into arm/fixes

Defconfig updates for kernel v5.18:

- Refresh defconfig with new and moved options
- Add some new hardware drivers
- Activate battery charging

* tag 'ux500-defconfig-soc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: config: u8500: Re-enable AB8500 battery charging
  ARM: config: u8500: Add some common hardware
  ARM: config: Refresh U8500 defconfig

Link: https://lore.kernel.org/r/CACRpkdY+_Go4XNzOh+Rvc24QBnUud2k-S7VQuaH5d-j71_dJog@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 's390-5.18-3' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Heiko Carstens:

- Convert current_stack_pointer to a register alias like it is assumed
   if ARCH_HAS_CURRENT_STACK_POINTER is selected. The existing
   implementation as a function breaks CONFIG_HARDENED_USERCOPY
   sanity-checks

- Get rid of -Warray-bounds warning within kexec code

- Add minimal IBM z16 support by reporting a proper elf platform, and
   adding compile options

- Update defconfigs

* tag 's390-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: enable CONFIG_HARDENED_USERCOPY in debug_defconfig
  s390: current_stack_pointer shouldn't be a function
  s390: update defconfigs
  s390/kexec: silence -Warray-bounds warning
  s390: allow to compile with z16 optimizations
  s390: add z16 elf platform

Merge tag 'net-5.18-rc3' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from wireless and netfilter.

  Current release - regressions:

   - smc: fix af_ops of child socket pointing to released memory

   - wifi: ath9k: fix usage of driver-private space in tx_info

  Previous releases - regressions:

   - ipv6: fix panic when forwarding a pkt with no in6 dev

   - sctp: use the correct skb for security_sctp_assoc_request

   - smc: fix NULL pointer dereference in smc_pnet_find_ib()

   - sched: fix initialization order when updating chain 0 head

   - phy: don't defer probe forever if PHY IRQ provider is missing

   - dsa: revert "net: dsa: setup master before ports"

   - dsa: felix: fix tagging protocol changes with multiple CPU ports

   - eth: ice:
      - fix use-after-free when freeing @rx_cpu_rmap
      - revert "iavf: fix deadlock occurrence during resetting VF
        interface"

   - eth: lan966x: stop processing the MAC entry is port is wrong

  Previous releases - always broken:

   - sched:
      - flower: fix parsing of ethertype following VLAN header
      - taprio: check if socket flags are valid

   - nfc: add flush_workqueue to prevent uaf

   - veth: ensure eth header is in skb's linear part

   - eth: stmmac: fix altr_tse_pcs function when using a fixed-link

   - eth: macb: restart tx only if queue pointer is lagging

   - eth: macvlan: fix leaking skb in source mode with nodst option"

* tag 'net-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
  net: bcmgenet: Revert "Use stronger register read/writes to assure ordering"
  rtnetlink: Fix handling of disabled L3 stats in RTM_GETSTATS replies
  net: dsa: felix: fix tagging protocol changes with multiple CPU ports
  tun: annotate access to queue->trans_start
  nfc: nci: add flush_workqueue to prevent uaf
  net: dsa: realtek: don't parse compatible string for RTL8366S
  net: dsa: realtek: fix Kconfig to assure consistent driver linkage
  net: ftgmac100: access hardware register after clock ready
  Revert "net: dsa: setup master before ports"
  macvlan: Fix leaking skb in source mode with nodst option
  netfilter: nf_tables: nft_parse_register can return a negative value
  net: lan966x: Stop processing the MAC entry is port is wrong.
  net: lan966x: Fix when a port's upper is changed.
  net: lan966x: Fix IGMP snooping when frames have vlan tag
  net: lan966x: Update lan966x_ptp_get_nominal_value
  sctp: Initialize daddr on peeled off socket
  net/smc: Fix af_ops of child socket pointing to released memory
  net/smc: Fix NULL pointer dereference in smc_pnet_find_ib()
  net/smc: use memcpy instead of snprintf to avoid out of bounds read
  net: macb: Restart tx only if queue pointer is lagging
  ...

Merge tag 'sound-5.18-rc3' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"This became an unexpectedly large pull request due to various
  regression fixes in the previous kernels.

  The majority of fixes are a series of patches to address the
  regression at probe errors in devres'ed drivers, while there are yet
  more fixes for the x86 SG allocations and for USB-audio buffer
  management. In addition, a few HD-audio quirks and other small fixes
  are found"

* tag 'sound-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (52 commits)
  ALSA: usb-audio: Limit max buffer and period sizes per time
  ALSA: memalloc: Add fallback SG-buffer allocations for x86
  ALSA: nm256: Don't call card private_free at probe error path
  ALSA: mtpav: Don't call card private_free at probe error path
  ALSA: rme9652: Fix the missing snd_card_free() call at probe error
  ALSA: hdspm: Fix the missing snd_card_free() call at probe error
  ALSA: hdsp: Fix the missing snd_card_free() call at probe error
  ALSA: oxygen: Fix the missing snd_card_free() call at probe error
  ALSA: lx6464es: Fix the missing snd_card_free() call at probe error
  ALSA: cmipci: Fix the missing snd_card_free() call at probe error
  ALSA: aw2: Fix the missing snd_card_free() call at probe error
  ALSA: als300: Fix the missing snd_card_free() call at probe error
  ALSA: lola: Fix the missing snd_card_free() call at probe error
  ALSA: bt87x: Fix the missing snd_card_free() call at probe error
  ALSA: sis7019: Fix the missing error handling
  ALSA: intel_hdmi: Fix the missing snd_card_free() call at probe error
  ALSA: via82xx: Fix the missing snd_card_free() call at probe error
  ALSA: sonicvibes: Fix the missing snd_card_free() call at probe error
  ALSA: rme96: Fix the missing snd_card_free() call at probe error
  ALSA: rme32: Fix the missing snd_card_free() call at probe error
  ...

dt-bindings: Fix array constraints on scalar properties

Scalar properties shouldn't have array constraints (minItems, maxItems,
items). These constraints can simply be dropped with any constraints under
'items' moved up a level.

Cc: Agathe Porte <agathe.porte@nokia.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Olivier Moysan <olivier.moysan@foss.st.com>
Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Cc: Yunfei Dong <yunfei.dong@mediatek.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: linux-hwmon@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-iio@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220413140121.3132837-1-robh@kernel.org

Merge tag 'for-5.18-rc2-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"A few more code and warning fixes.

  There's one feature ioctl removal patch slated for 5.18 that did not
  make it to the main pull request. It's just a one-liner and the ioctl
  has a v2 that's in use for a long time, no point to postpone it to
  5.19.

  Late update:

   - remove balance v1 ioctl, superseded by v2 in 2012

  Fixes:

   - add back cgroup attribution for compressed writes

   - add super block write start/end annotations to asynchronous balance

   - fix root reference count on an error handling path

   - in zoned mode, activate zone at the chunk allocation time to avoid
     ENOSPC due to timing issues

   - fix delayed allocation accounting for direct IO

  Warning fixes:

   - simplify assertion condition in zoned check

   - remove an unused variable"

* tag 'for-5.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix btrfs_submit_compressed_write cgroup attribution
  btrfs: fix root ref counts in error handling in btrfs_get_root_ref
  btrfs: zoned: activate block group only for extent allocation
  btrfs: return allocated block group from do_chunk_alloc()
  btrfs: mark resumed async balance as writing
  btrfs: remove support of balance v1 ioctl
  btrfs: release correct delalloc amount in direct IO write path
  btrfs: remove unused variable in btrfs_{start,write}_dirty_block_groups()
  btrfs: zoned: remove redundant condition in btrfs_run_delalloc_range

Merge tag 'fscache-fixes-20220413' of git://git./linux/kernel/git/dhowells/linux-fs

Pull fscache fixes from David Howells:
"Here's a collection of fscache and cachefiles fixes and misc small
  cleanups. The two main fixes are:

   - Add a missing unmark of the inode in-use mark in an error path.

   - Fix a KASAN slab-out-of-bounds error when setting the xattr on a
     cachefiles volume due to the wrong length being given to memcpy().

  In addition, there's the removal of an unused parameter, removal of an
  unused Kconfig option, conditionalising a bit of procfs-related stuff
  and some doc fixes"

* tag 'fscache-fixes-20220413' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  fscache: remove FSCACHE_OLD_API Kconfig option
  fscache: Use wrapper fscache_set_cache_state() directly when relinquishing
  fscache: Move fscache_cookies_seq_ops specific code under CONFIG_PROC_FS
  fscache: Remove the cookie parameter from fscache_clear_page_bits()
  docs: filesystems: caching/backend-api.rst: fix an object withdrawn API
  docs: filesystems: caching/backend-api.rst: correct two relinquish APIs use
  cachefiles: Fix KASAN slab-out-of-bounds in cachefiles_set_volume_xattr
  cachefiles: unmark inode in use in error path

block: null_blk: end timed out poll request

When poll request is timed out, it is removed from the poll list,
but not completed, so the request is leaked, and never get chance
to complete.

Fix the issue by ending it in timeout handler.

Fixes: 0a593fbbc245 ("null_blk: poll queue support")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220413084836.1571995-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: fix offset/size check in bio_trim()

Unit of bio->bi_iter.bi_size is bytes, but unit of offset/size
is sector.

Fix the above issue in checking offset/size in bio_trim().

Fixes: e83502ca5f1e ("block: fix argument type of bio_trim()")
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220414084443.1736850-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

perf bench: Fix numa bench to fix usage of affinity for machines with #CPUs > 1K

The 'perf bench numa' testcase fails on systems with more than 1K CPUs.

Testcase: perf bench numa mem -p 1 -t 3 -P 512 -s 100 -zZ0qcm --thp  1

Snippet of code:

  <<>>
  perf: bench/numa.c:302: bind_to_node: Assertion `!(ret)' failed.
  Aborted (core dumped)
  <<>>

bind_to_node() uses "sched_getaffinity" to save the original cpumask and
this call is returning EINVAL ((invalid argument).

This happens because the default mask size in glibc is 1024.  To
overcome this 1024 CPUs mask size limitation of cpu_set_t, change the
mask size using the CPU_*_S macros ie, use CPU_ALLOC to allocate
cpumask, CPU_ALLOC_SIZE for size.

Apart from fixing this for "orig_mask", apply same logic to "mask" as
well which is used to setaffinity so that mask size is large enough to
represent number of possible CPU's in the system.

sched_getaffinity is used in one more place in perf numa bench. It is in
"bind_to_cpu" function. Apply the same logic there also. Though
currently no failure is reported from there, it is ideal to change
getaffinity to work with such system configurations having CPU's more
than default mask size supported by glibc.

Also fix "sched_setaffinity" to use mask size which is large enough to
represent number of possible CPU's in the system.

Fixed all places where "bind_cpumask" which is part of "struct
thread_data" is used such that bind_cpumask works in all configuration.

Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220412164059.42654-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf bench: Fix numa testcase to check if CPU used to bind task is online

Perf numa bench test fails with error:

Testcase:

  ./perf bench numa mem -p 2 -t 1 -P 1024 -C 0,8 -M 1,0 -s 20 -zZq --thp  1 --no-data_rand_walk

Failure snippet:

<<>>
  Running 'numa/mem' benchmark:

  # Running main, "perf bench numa numa-mem -p 2 -t 1 -P 1024 -C 0,8 -M 1,0 -s 20 -zZq --thp 1 --no-data_rand_walk"

  perf: bench/numa.c:333: bind_to_cpumask: Assertion `!(ret)' failed.
<<>>

The Testcases uses CPU's 0 and 8. In function "parse_setup_cpu_list",
There is check to see if cpu number is greater than max cpu's possible
in the system ie via "if (bind_cpu_0 >= g->p.nr_cpus || bind_cpu_1 >=
g->p.nr_cpus) {".

But it could happen that system has say 48 CPU's, but only number of
online CPU's is 0-7. Other CPU's are offlined. Since "g->p.nr_cpus" is
48, so function will go ahead and set bit for CPU 8 also in cpumask (
td->bind_cpumask).

bind_to_cpumask function is called to set affinity using
sched_setaffinity and the cpumask. Since the CPU8 is not present, set
affinity will fail here with EINVAL.

Fix this issue by adding a check to make sure that, CPU's provided in
the input argument values are online before proceeding further and skip
the test. For this, include new helper function "is_cpu_online" in
"tools/perf/util/header.c".

Since "BIT(x)" definition will get included from header.h, remove
that from bench/numa.c

Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220412164059.42654-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf record: Fix per-thread option

Per-thread mode doesn't have specific CPUs for events, add checks for
this case.

Minor fix to a pr_debug by Ian Rogers <irogers@google.com> to avoid an
out of bound array access.

Fixes: 7954f71689f90cb2 ("perf record: Introduce thread affinity and mmap masks")
Reported-by: Ian Rogers <irogers@google.com>
Signed-off-by: Alexey Bayduraev <alexey.bayduraev@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20220414014642.3308206-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

gpio: sim: fix setting and getting multiple lines

We need to take mask into account in the set/get_multiple() callbacks.
Use bitmap_replace() instead of bitmap_copy().

Fixes: cb8c474e79be ("gpio: sim: new testing module")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

net: bcmgenet: Revert "Use stronger register read/writes to assure ordering"

It turns out after digging deeper into this bug, that it was being
triggered by GCC12 failing to call the bcmgenet_enable_dma()
routine. Given that a gcc12 fix has been merged [1] and the genet
driver now works properly when built with gcc12, this commit should
be reverted.

[1]
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105160
https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=aabb9a261ef060cf24fd626713f1d7d9df81aa57

Fixes: 8d3ea3d402db ("net: bcmgenet: Use stronger register read/writes to assure ordering")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220412210420.1129430-1-jeremy.linton@arm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

rtnetlink: Fix handling of disabled L3 stats in RTM_GETSTATS replies

When L3 stats are disabled, rtnl_offload_xstats_get_size_stats() returns
size of 0, which is supposed to be an indication that the corresponding
attribute should not be emitted. However, instead, the current code
reserves a 0-byte attribute.

The reason this does not show up as a citation on a kasan kernel is that
netdev_offload_xstats_get(), which is supposed to fill in the data, never
ends up getting called, because rtnl_offload_xstats_get_stats() notices
that the stats are not actually used and skips the call.

Thus a zero-length IFLA_OFFLOAD_XSTATS_L3_STATS attribute ends up in a
response, confusing the userspace.

Fix by skipping the L3-stats related block in rtnl_offload_xstats_fill().

Fixes: 0e7788fd7622 ("net: rtnetlink: Add UAPI for obtaining L3 offload xstats")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/591b58e7623edc3eb66dd1fcfa8c8f133d090974.1649794741.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: dsa: felix: fix tagging protocol changes with multiple CPU ports

When the device tree has 2 CPU ports defined, a single one is active
(has any dp->cpu_dp pointers point to it). Yet the second one is still a
CPU port, and DSA still calls ->change_tag_protocol on it.

On the NXP LS1028A, the CPU ports are ports 4 and 5. Port 4 is the
active CPU port and port 5 is inactive.

After the following commands:

# Initial setting
cat /sys/class/net/eno2/dsa/tagging
ocelot
echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging
echo ocelot > /sys/class/net/eno2/dsa/tagging

traffic is now broken, because the driver has moved the NPI port from
port 4 to port 5, unbeknown to DSA.

The problem can be avoided by detecting that the second CPU port is
unused, and not doing anything for it. Further rework will be needed
when proper support for multiple CPU ports is added.

Treat this as a bug and prepare current kernels to work in single-CPU
mode with multiple-CPU DT blobs.

Fixes: adb3dccf090b ("net: dsa: felix: convert to the new .change_tag_protocol DSA API")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220412172209.2531865-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

tun: annotate access to queue->trans_start

Commit 5337824f4dc4 ("net: annotate accesses to queue->trans_start")
introduced a new helper, txq_trans_cond_update, to update
queue->trans_start using WRITE_ONCE. One snippet in drivers/net/tun.c
was missed, as it was introduced roughly at the same time.

Fixes: 5337824f4dc4 ("net: annotate accesses to queue->trans_start")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220412135852.466386-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

cifs: verify that tcon is valid before dereference in cifs_kill_sb

On umount, cifs_sb->tlink_tree might contain entries that do not represent
a valid tcon.
Check the tcon for error before we dereference it.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'drm-msm-fixes-2022-04-13' of https://gitlab.freedesktop.org/drm/msm into drm-fixes

Some msm fixes for v5.18.

kzalloc return checks, display fix, misc locking and scheduler bug, iommu present removal.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvuTwx09MKwK68KWXqi4o7LxDGMUz1=Z7xOS+i=OV84Ug@mail.gmail.com