mm: slightly clarify KSM logic in do_swap_page()

Let's make it clearer that KSM might only have to copy a page in case we
have a page in the swapcache, not if we allocated a fresh page and
bypassed the swapcache.  While at it, add a comment why this is usually
necessary and merge the two swapcache conditions.

[akpm@linux-foundation.org: fix comment, per David]

Link: https://lkml.kernel.org/r/20220131162940.210846-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: optimize do_wp_page() for fresh pages in local LRU pagevecs

For example, if a page just got swapped in via a read fault, the LRU
pagevecs might still hold a reference to the page.  If we trigger a write
fault on such a page, the additional reference from the LRU pagevecs will
prohibit reusing the page.

Let's conditionally drain the local LRU pagevecs when we stumble over a
!PageLRU() page.  We cannot easily drain remote LRU pagevecs and it might
not be desirable performance-wise.  Consequently, this will only avoid
copying in some cases.

Add a simple "page_count(page) > 3" check first but keep the
"page_count(page) > 1 + PageSwapCache(page)" check in place, as we want to
minimize cases where we remove a page from the swapcache but won't be able
to reuse it, for example, because another process has it mapped R/O, to
not affect reclaim.

We cannot easily handle the following cases and we will always have to
copy:

(1) The page is referenced in the LRU pagevecs of other CPUs. We really
    would have to drain the LRU pagevecs of all CPUs -- most probably
    copying is much cheaper.

(2) The page is already PageLRU() but is getting moved between LRU
    lists, for example, for activation (e.g., mark_page_accessed()),
    deactivation (MADV_COLD), or lazyfree (MADV_FREE). We'd have to
    drain mostly unconditionally, which might be bad performance-wise.
    Most probably this won't happen too often in practice.

Note that there are other reasons why an anon page might temporarily not
be PageLRU(): for example, compaction and migration have to isolate LRU
pages from the LRU lists first (isolate_lru_page()), moving them to
temporary local lists and clearing PageLRU() and holding an additional
reference on the page.  In that case, we'll always copy.

This change seems to be fairly effective with the reproducer [1] shared by
Nadav, as long as writeback is done synchronously, for example, using
zram.  However, with asynchronous writeback, we'll usually fail to free
the swapcache because the page is still under writeback: something we
cannot easily optimize for, and maybe it's not really relevant in
practice.

[1] https://lkml.kernel.org/r/0480D692-D9B2-429A-9A88-9BBA1331AC3A@gmail.com

Link: https://lkml.kernel.org/r/20220131162940.210846-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liang Zhang <zhangliang5@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: optimize do_wp_page() for exclusive pages in the swapcache

Patch series "mm: COW fixes part 1: fix the COW security issue for THP and swap", v3.

This series attempts to optimize and streamline the COW logic for ordinary
anon pages and THP anon pages, fixing two remaining instances of
CVE-2020-29374 in do_swap_page() and do_huge_pmd_wp_page(): information
can leak from a parent process to a child process via anonymous pages
shared during fork().

This issue, including other related COW issues, has been summarized in [2]:

 "1. Observing Memory Modifications of Private Pages From A Child Process

  Long story short: process-private memory might not be as private as you
  think once you fork(): successive modifications of private memory
  regions in the parent process can still be observed by the child
  process, for example, by smart use of vmsplice()+munmap().

  The core problem is that pinning pages readable in a child process, such
  as done via the vmsplice system call, can result in a child process
  observing memory modifications done in the parent process the child is
  not supposed to observe. [1] contains an excellent summary and [2]
  contains further details. This issue was assigned CVE-2020-29374 [9].

  For this to trigger, it's required to use a fork() without subsequent
  exec(), for example, as used under Android zygote. Without further
  details about an application that forks less-privileged child processes,
  one cannot really say what's actually affected and what's not -- see the
  details section the end of this mail for a short sshd/openssh analysis.

  While commit 17839856fd58 ("gup: document and work around "COW can break
  either way" issue") fixed this issue and resulted in other problems
  (e.g., ptrace on pmem), commit 09854ba94c6a ("mm: do_wp_page()
  simplification") re-introduced part of the problem unfortunately.

  The original reproducer can be modified quite easily to use THP [3] and
  make the issue appear again on upstream kernels. I modified it to use
  hugetlb [4] and it triggers as well. The problem is certainly less
  severe with hugetlb than with THP; it merely highlights that we still
  have plenty of open holes we should be closing/fixing.

  Regarding vmsplice(), the only known workaround is to disallow the
  vmsplice() system call ... or disable THP and hugetlb. But who knows
  what else is affected (RDMA? O_DIRECT?) to achieve the same goal -- in
  the end, it's a more generic issue"

This security issue was first reported by Jann Horn on 27 May 2020 and it
currently affects anonymous pages during swapin, anonymous THP and hugetlb.
This series tackles anonymous pages during swapin and anonymous THP:

 - do_swap_page() for handling COW on PTEs during swapin directly

 - do_huge_pmd_wp_page() for handling COW on PMD-mapped THP during write
   faults

With this series, we'll apply the same COW logic we have in do_wp_page()
to all swappable anon pages: don't reuse (map writable) the page in
case there are additional references (page_count() != 1). All users of
reuse_swap_page() are remove, and consequently reuse_swap_page() is
removed.

In general, we're struggling with the following COW-related issues:

(1) "missed COW": we miss to copy on write and reuse the page (map it
    writable) although we must copy because there are pending references
    from another process to this page. The result is a security issue.

(2) "wrong COW": we copy on write although we wouldn't have to and
    shouldn't: if there are valid GUP references, they will become out
    of sync with the pages mapped into the page table. We fail to detect
    that such a page can be reused safely, especially if never more than
    a single process mapped the page. The result is an intra process
    memory corruption.

(3) "unnecessary COW": we copy on write although we wouldn't have to:
    performance degradation and temporary increases swap+memory
    consumption can be the result.

While this series fixes (1) for swappable anon pages, it tries to reduce
reported cases of (3) first as good and easy as possible to limit the
impact when streamlining.  The individual patches try to describe in
which cases we will run into (3).

This series certainly makes (2) worse for THP, because a THP will now
get PTE-mapped on write faults if there are additional references, even
if there was only ever a single process involved: once PTE-mapped, we'll
copy each and every subpage and won't reuse any subpage as long as the
underlying compound page wasn't split.

I'm working on an approach to fix (2) and improve (3): PageAnonExclusive
to mark anon pages that are exclusive to a single process, allow GUP
pins only on such exclusive pages, and allow turning exclusive pages
shared (clearing PageAnonExclusive) only if there are no GUP pins.  Anon
pages with PageAnonExclusive set never have to be copied during write
faults, but eventually during fork() if they cannot be turned shared.
The improved reuse logic in this series will essentially also be the
logic to reset PageAnonExclusive.  This work will certainly take a
while, but I'm planning on sharing details before having code fully
ready.

#1-#5 can be applied independently of the rest. #6-#9 are mostly only
cleanups related to reuse_swap_page().

Notes:
* For now, I'll leave hugetlb code untouched: "unnecessary COW" might
  easily break existing setups because hugetlb pages are a scarce resource
  and we could just end up having to crash the application when we run out
  of hugetlb pages. We have to be very careful and the security aspect with
  hugetlb is most certainly less relevant than for unprivileged anon pages.
* Instead of lru_add_drain() we might actually just drain the lru_add list
  or even just remove the single page of interest from the lru_add list.
  This would require a new helper function, and could be added if the
  conditional lru_add_drain() turn out to be a problem.
* I extended the test case already included in [1] to also test for the
  newly found do_swap_page() case. I'll send that out separately once/if
  this part was merged.

[1] https://lkml.kernel.org/r/20211217113049.23850-1-david@redhat.com
[2] https://lore.kernel.org/r/3ae33b08-d9ef-f846-56fb-645e3b9b4c66@redhat.com

This patch (of 9):

Liang Zhang reported [1] that the current COW logic in do_wp_page() is
sub-optimal when it comes to swap+read fault+write fault of anonymous
pages that have a single user, visible via a performance degradation in
the redis benchmark.  Something similar was previously reported [2] by
Nadav with a simple reproducer.

After we put an anon page into the swapcache and unmapped it from a single
process, that process might read that page again and refault it read-only.
If that process then writes to that page, the process is actually the
exclusive user of the page, however, the COW logic in do_co_page() won't
be able to reuse it due to the additional reference from the swapcache.

Let's optimize for pages that have been added to the swapcache but only
have an exclusive user.  Try removing the swapcache reference if there is
hope that we're the exclusive user.

We will fail removing the swapcache reference in two scenarios:
(1) There are additional swap entries referencing the page: copying
    instead of reusing is the right thing to do.
(2) The page is under writeback: theoretically we might be able to reuse
    in some cases, however, we cannot remove the additional reference
    and will have to copy.

Note that we'll only try removing the page from the swapcache when it's
highly likely that we'll be the exclusive owner after removing the page
from the swapache.  As we're about to map that page writable and redirty
it, that should not affect reclaim but is rather the right thing to do.

Further, we might have additional references from the LRU pagevecs, which
will force us to copy instead of being able to reuse.  We'll try handling
such references for some scenarios next.  Concurrent writeback cannot be
handled easily and we'll always have to copy.

While at it, remove the superfluous page_mapcount() check: it's
implicitly covered by the page_count() for ordinary anon pages.

[1] https://lkml.kernel.org/r/20220113140318.11117-1-zhangliang5@huawei.com
[2] https://lkml.kernel.org/r/0480D692-D9B2-429A-9A88-9BBA1331AC3A@gmail.com

Link: https://lkml.kernel.org/r/20220131162940.210846-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Liang Zhang <zhangliang5@huawei.com>
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/huge_memory: make is_transparent_hugepage() static

It's only used inside the huge_memory.c now. Don't export it and make
it static. We can thus reduce the size of huge_memory.o a bit.

Without this patch:
   text    data     bss     dec     hex filename
  32319    2965       4   35288    89d8 mm/huge_memory.o

With this patch:
   text    data     bss     dec     hex filename
  32042    2957       4   35003    88bb mm/huge_memory.o

Link: https://lkml.kernel.org/r/20220302082145.12028-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

userfaultfd/selftests: enable hugetlb remap and remove event testing

With MADV_DONTNEED support added to hugetlb mappings, mremap testing can
also be enabled for hugetlb.

Modify the tests to use madvise MADV_DONTNEED and MADV_REMOVE instead of
fallocate hole puch for releasing hugetlb pages.

Link: https://lkml.kernel.org/r/20220215002348.128823-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests/vm: add hugetlb madvise MADV_DONTNEED MADV_REMOVE test

Now that MADV_DONTNEED support for hugetlb is enabled, add corresponding
tests.  MADV_REMOVE has been enabled for some time, but no tests exist so
add them as well.

Link: https://lkml.kernel.org/r/20220215002348.128823-3-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: enable MADV_DONTNEED for hugetlb mappings

Patch series "Add hugetlb MADV_DONTNEED support", v3.

Userfaultfd selftests for hugetlb does not perform UFFD_EVENT_REMAP
testing.  However, mremap support was recently added in commit
550a7d60bd5e ("mm, hugepages: add mremap() support for hugepage backed
vma").  While attempting to enable mremap support in the test, it was
discovered that the mremap test indirectly depends on MADV_DONTNEED.

madvise does not allow MADV_DONTNEED for hugetlb mappings.  However, that
is primarily due to the check in can_madv_lru_vma().  By simply removing
the check and adding huge page alignment, MADV_DONTNEED can be made to
work for hugetlb mappings.

Do note that there is no compelling use case for adding this support.
This was discussed in the RFC [1].  However, adding support makes sense as
it is fairly trivial and brings hugetlb functionality more in line with
'normal' memory.

After enabling support, add selftest for MADV_DONTNEED as well as
MADV_REMOVE.  Then update userfaultfd selftest.

If new functionality is accepted, then madvise man page will be updated to
indicate hugetlb is supported.  It will also be updated to clarify what
happens to the passed length argument.

This patch (of 3):

MADV_DONTNEED is currently disabled for hugetlb mappings.  This certainly
makes sense in shared file mappings as the pagecache maintains a reference
to the page and it will never be freed.  However, it could be useful to
unmap and free pages in private mappings.  In addition, userfaultfd minor
fault users may be able to simplify code by using MADV_DONTNEED.

The primary thing preventing MADV_DONTNEED from working on hugetlb
mappings is a check in can_madv_lru_vma().  To allow support for hugetlb
mappings create and use a new routine madvise_dontneed_free_valid_vma()
that allows hugetlb mappings in this specific case.

For normal mappings, madvise requires the start address be PAGE aligned
and rounds up length to the next multiple of PAGE_SIZE.  Do similarly for
hugetlb mappings: require start address be huge page size aligned and
round up length to the next multiple of huge page size.  Use the new
madvise_dontneed_free_valid_vma routine to check alignment and round up
length/end.  zap_page_range requires this alignment for hugetlb vmas
otherwise we will hit BUGs.

Link: https://lkml.kernel.org/r/20220215002348.128823-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20220215002348.128823-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: disable LOCKDEP when printing reports

If LOCKDEP detects a bug while KASAN is printing a report and if
panic_on_warn is set, KASAN will not be able to finish.  Disable LOCKDEP
while KASAN is printing a report.

See https://bugzilla.kernel.org/show_bug.cgi?id=202115 for an example
of the issue.

Link: https://lkml.kernel.org/r/c48a2a3288200b07e1788b77365c2f02784cfeb4.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: move and hide kasan_save_enable/restore_multi_shot

 - Move kasan_save_enable/restore_multi_shot() declarations to
   mm/kasan/kasan.h, as there is no need for them to be visible outside
   of KASAN implementation.

 - Only define and export these functions when KASAN tests are enabled.

 - Move their definitions closer to other test-related code in report.c.

Link: https://lkml.kernel.org/r/6ba637333b78447f027d775f2d55ab1a40f63c99.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: reorder reporting functions

Move print_error_description()'s, report_suppressed()'s, and
report_enabled()'s definitions to improve the logical order of function
definitions in report.c.

No functional changes.

Link: https://lkml.kernel.org/r/82aa926c411e00e76e97e645a551ede9ed0c5e79.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: respect KASAN_BIT_REPORTED in all reporting routines

Currently, only kasan_report() checks the KASAN_BIT_REPORTED and
KASAN_BIT_MULTI_SHOT flags.

Make other reporting routines check these flags as well.

Also add explanatory comments.

Note that the current->kasan_depth check is split out into
report_suppressed() and only called for kasan_report().

Link: https://lkml.kernel.org/r/715e346b10b398e29ba1b425299dcd79e29d58ce.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: add comment about UACCESS regions to kasan_report

Add a comment explaining why kasan_report() is the only reporting function
that uses user_access_save/restore().

Link: https://lkml.kernel.org/r/1201ca3c2be42c7bd077c53d2e46f4a51dd1476a.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: rename kasan_access_info to kasan_report_info

Rename kasan_access_info to kasan_report_info, as the latter name better
reflects the struct's purpose.

Link: https://lkml.kernel.org/r/158a4219a5d356901d017352558c989533a0782c.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: move and simplify kasan_report_async

Place kasan_report_async() next to the other main reporting routines.
Also simplify printed information.

Link: https://lkml.kernel.org/r/52d942ef3ffd29bdfa225bbe8e327bc5bda7ab09.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: call print_report from kasan_report_invalid_free

Call print_report() in kasan_report_invalid_free() instead of calling
printing functions directly.  Compared to the existing implementation of
kasan_report_invalid_free(), print_report() makes sure that the buggy
address has metadata before printing it.

The change requires adding a report type field into kasan_access_info and
using it accordingly.

kasan_report_async() is left as is, as using print_report() will only
complicate the code.

Link: https://lkml.kernel.org/r/9ea6f0604c5d2e1fb28d93dc6c44232c1f8017fe.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: merge __kasan_report into kasan_report

Merge __kasan_report() into kasan_report().  The code is simple enough to
be readable without the __kasan_report() helper.

Link: https://lkml.kernel.org/r/c8a125497ef82f7042b3795918dffb81a85a878e.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: restructure kasan_report

Restructure kasan_report() to make reviewing the subsequent patches
easier.

Link: https://lkml.kernel.org/r/ca28042889858b8cc4724d3d4378387f90d7a59d.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: simplify kasan_find_first_bad_addr call sites

Move the addr_has_metadata() check into kasan_find_first_bad_addr().

Link: https://lkml.kernel.org/r/a49576f7a23283d786ba61579cb0c5057e8f0b9b.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: split out print_report from __kasan_report

Split out the part of __kasan_report() that prints things into
print_report().  One of the subsequent patches makes another error handler
use print_report() as well.

Includes lower-level changes:

 - Allow addr_has_metadata() accepting a tagged address.

 - Drop the const qualifier from the fields of kasan_access_info to
   avoid excessive type casts.

 - Change the type of the address argument of __kasan_report() and
   end_report() to void * to reduce the number of type casts.

Link: https://lkml.kernel.org/r/9be3ed99dd24b9c4e1c4a848b69a0c6ecefd845e.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: move disable_trace_on_warning to start_report

Move the disable_trace_on_warning() call, which enables the
/proc/sys/kernel/traceoff_on_warning interface for KASAN bugs, to
start_report(), so that it functions for all types of KASAN reports.

Link: https://lkml.kernel.org/r/7c066c5de26234ad2cebdd931adfe437f8a95d58.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: move update_kunit_status to start_report

Instead of duplicating calls to update_kunit_status() in every error
report routine, call it once in start_report().  Pass the sync flag as an
additional argument to start_report().

Link: https://lkml.kernel.org/r/cae5c845a0b6f3c867014e53737cdac56b11edc7.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: check CONFIG_KASAN_KUNIT_TEST instead of CONFIG_KUNIT

Check the more specific CONFIG_KASAN_KUNIT_TEST config option when
defining things related to KUnit-compatible KASAN tests instead of
CONFIG_KUNIT.

Also put the kunit_kasan_status definition next to the definitons of other
KASAN-related structs.

Link: https://lkml.kernel.org/r/223592d38d2a601a160a3b2b3d5a9f9090350e62.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: simplify kasan_update_kunit_status() and call sites

 - Rename kasan_update_kunit_status() to update_kunit_status() (the
   function is static).

 - Move the IS_ENABLED(CONFIG_KUNIT) to the function's definition
   instead of duplicating it at call sites.

 - Obtain and check current->kunit_test within the function.

Link: https://lkml.kernel.org/r/dac26d811ae31856c3d7666de0b108a3735d962d.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: simplify async check in end_report()

Currently, end_report() does not call trace_error_report_end() for bugs
detected in either async or asymm mode (when kasan_async_fault_possible()
returns true), as the address of the bad access might be unknown.

However, for asymm mode, the address is known for faults triggered by read
operations.

Instead of using kasan_async_fault_possible(), simply check that the addr
is not NULL when calling trace_error_report_end().

Link: https://lkml.kernel.org/r/1c8ce43f97300300e62c941181afa2eb738965c5.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: print basic stack frame info for SW_TAGS

Software Tag-Based mode tags stack allocations when CONFIG_KASAN_STACK
is enabled. Print task name and id in reports for stack-related bugs.

[andreyknvl@google.com: include linux/sched/task_stack.h]
Link: https://lkml.kernel.org/r/d7598f11a34ed96e508f7640fa038662ed2305ec.1647099922.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/029aaa87ceadde0702f3312a34697c9139c9fb53.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: improve stack frame info in reports

 - Print at least task name and id for reports affecting allocas
   (get_address_stack_frame_info() does not support them).

 - Capitalize first letter of each sentence.

Link: https://lkml.kernel.org/r/aa613f097c12f7b75efb17f2618ae00480fb4bc3.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: rearrange stack frame info in reports

 - Move printing stack frame info before printing page info.

 - Add object_is_on_stack() check to print_address_description() and add
   a corresponding WARNING to kasan_print_address_stack_frame(). This
   looks more in line with the rest of the checks in this function and
   also allows to avoid complicating code logic wrt line breaks.

 - Clean up comments related to get_address_stack_frame_info().

Link: https://lkml.kernel.org/r/1ee113a4c111df97d168c820b527cda77a3cac40.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: more line breaks in reports

Add a line break after each part that describes the buggy address.
Improves readability of reports.

Link: https://lkml.kernel.org/r/8682c4558e533cd0f99bdb964ce2fe741f2a9212.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: drop addr check from describe_object_addr

Patch series "kasan: report clean-ups and improvements".

A number of clean-up patches for KASAN reporting code.  Most are
non-functional and only improve readability.

This patch (of 22):

describe_object_addr() used to be called with NULL addr in the early days
of KASAN.  This no longer happens, so drop the check.

Link: https://lkml.kernel.org/r/cover.1646237226.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/761f8e5a6ee040d665934d916a90afe9f322f745.1646237226.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: print virtual mapping info in reports

Print virtual mapping range and its creator in reports affecting virtual
mappings.

Also get physical page pointer for such mappings, so page information gets
printed as well.

Link: https://lkml.kernel.org/r/6ebb11210ae21253198e264d4bb0752c1fad67d7.1645548178.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: update function name in comments

The function kasan_global_oob was renamed to kasan_global_oob_right, but
the comments referring to it were not updated.  Do so.

Link: https://linux-review.googlesource.com/id/I20faa90126937bbee77d9d44709556c3dd4b40be
Link: https://lkml.kernel.org/r/20220219012433.890941-1-pcc@google.com
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/kasan: remove unnecessary CONFIG_KASAN option

In mm/Makefile has:

  obj-$(CONFIG_KASAN)     += kasan/

So that we don't need 'obj-$(CONFIG_KASAN) :=' in mm/kasan/Makefile,
delete it from mm/kasan/Makefile.

Link: https://lkml.kernel.org/r/20220221065421.20689-1-tangmeng@uniontech.com
Signed-off-by: tangmeng <tangmeng@uniontech.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: test: support async (again) and asymm modes for HW_TAGS

Async mode support has already been implemented in commit e80a76aa1a91
("kasan, arm64: tests supports for HW_TAGS async mode") but then got
accidentally broken in commit 99734b535d9b ("kasan: detect false-positives
in tests").

Restore the changes removed by the latter patch and adapt them for asymm
mode: add a sync_fault flag to kunit_kasan_expectation that only get set
if the MTE fault was synchronous, and reenable MTE on such faults in
tests.

Also rename kunit_kasan_expectation to kunit_kasan_status and move its
definition to mm/kasan/kasan.h from include/linux/kasan.h, as this
structure is only internally used by KASAN.  Also put the structure
definition under IS_ENABLED(CONFIG_KUNIT).

Link: https://lkml.kernel.org/r/133970562ccacc93ba19d754012c562351d4a8c8.1645033139.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: improve vmalloc tests

Update the existing vmalloc_oob() test to account for the specifics of the
tag-based modes.  Also add a few new checks and comments.

Add new vmalloc-related tests:

 - vmalloc_helpers_tags() to check that exported vmalloc helpers can
   handle tagged pointers.

 - vmap_tags() to check that SW_TAGS mode properly tags vmap() mappings.

 - vm_map_ram_tags() to check that SW_TAGS mode properly tags
   vm_map_ram() mappings.

 - vmalloc_percpu() to check that SW_TAGS mode tags regions allocated
   for __alloc_percpu(). The tagging of per-cpu mappings is best-effort;
   proper tagging is tracked in [1].

[1] https://bugzilla.kernel.org/show_bug.cgi?id=215019

[sfr@canb.auug.org.au: similar to "kasan: test: fix compatibility with FORTIFY_SOURCE"]
Link: https://lkml.kernel.org/r/20220128144801.73f5ced0@canb.auug.org.au
Link: https://lkml.kernel.org/r/865c91ba49b90623ab50c7526b79ccb955f544f0.1644950160.git.andreyknvl@google.com
[andreyknvl@google.com: set_memory_rw/ro() are not exported to modules]
Link: https://lkml.kernel.org/r/019ac41602e0c4a7dfe96dc8158a95097c2b2ebd.1645554036.git.andreyknvl@google.com
[akpm@linux-foundation.org: fix build]

Cc: Andrey Konovalov <andreyknvl@gmail.com>
[andreyknvl@google.com: vmap_tags() and vm_map_ram_tags() pass invalid page array size]
Link: https://lkml.kernel.org/r/bbdc1c0501c5275e7f26fdb8e2a7b14a40a9f36b.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: documentation updates

Update KASAN documentation:

 - Bump Clang version requirement for HW_TAGS as ARM64_MTE depends on
   AS_HAS_LSE_ATOMICS as of commit 2decad92f4731 ("arm64: mte: Ensure
   TIF_MTE_ASYNC_FAULT is set atomically"), which requires Clang 12.

 - Add description of the new kasan.vmalloc command line flag.

 - Mention that SW_TAGS and HW_TAGS modes now support vmalloc tagging.

 - Explicitly say that the "Shadow memory" section is only applicable to
   software KASAN modes.

 - Mention that shadow-based KASAN_VMALLOC is supported on arm64.

Link: https://lkml.kernel.org/r/a61189128fa3f9fbcfd9884ff653d401864b8e74.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm64: select KASAN_VMALLOC for SW/HW_TAGS modes

Generic KASAN already selects KASAN_VMALLOC to allow VMAP_STACK to be
selected unconditionally, see commit acc3042d62cb9 ("arm64: Kconfig:
select KASAN_VMALLOC if KANSAN_GENERIC is enabled").

The same change is needed for SW_TAGS KASAN.

HW_TAGS KASAN does not require enabling KASAN_VMALLOC for VMAP_STACK, they
already work together as is.  Still, selecting KASAN_VMALLOC still makes
sense to make vmalloc() always protected.  In case any bugs in KASAN's
vmalloc() support are discovered, the command line kasan.vmalloc flag can
be used to disable vmalloc() checking.

Select KASAN_VMALLOC for all KASAN modes for arm64.

Link: https://lkml.kernel.org/r/99d6b3ebf57fc1930ff71f9a4a71eea19881b270.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: allow enabling KASAN_VMALLOC and SW/HW_TAGS

Allow enabling CONFIG_KASAN_VMALLOC with SW_TAGS and HW_TAGS KASAN modes.

Also adjust CONFIG_KASAN_VMALLOC description:

 - Mention HW_TAGS support.

 - Remove unneeded internal details: they have no place in Kconfig
   description and are already explained in the documentation.

Link: https://lkml.kernel.org/r/bfa0fdedfe25f65e5caa4e410f074ddbac7a0b59.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: add kasan.vmalloc command line flag

Allow disabling vmalloc() tagging for HW_TAGS KASAN via a kasan.vmalloc
command line switch.

This is a fail-safe switch intended for production systems that enable
HW_TAGS KASAN.  In case vmalloc() tagging ends up having an issue not
detected during testing but that manifests in production, kasan.vmalloc
allows to turn vmalloc() tagging off while leaving page_alloc/slab
tagging on.

Link: https://lkml.kernel.org/r/904f6d4dfa94870cc5fc2660809e093fd0d27c3b.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: clean up feature flags for HW_TAGS mode

 - Untie kasan_init_hw_tags() code from the default values of
   kasan_arg_mode and kasan_arg_stacktrace.

 - Move static_branch_enable(&kasan_flag_enabled) to the end of
   kasan_init_hw_tags_cpu().

 - Remove excessive comments in kasan_arg_mode switch.

 - Add new comments.

Link: https://lkml.kernel.org/r/76ebb340265be57a218564a497e1f52ff36a3879.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: mark kasan_arg_stacktrace as __initdata

As kasan_arg_stacktrace is only used in __init functions, mark it as
__initdata instead of __ro_after_init to allow it be freed after boot.

The other enums for KASAN args are used in kasan_init_hw_tags_cpu(), which
is not marked as __init as a CPU can be hot-plugged after boot.  Clarify
this in a comment.

Link: https://lkml.kernel.org/r/7fa090865614f8e0c6c1265508efb1d429afaa50.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, arm64: don't tag executable vmalloc allocations

Besides asking vmalloc memory to be executable via the prot argument of
__vmalloc_node_range() (see the previous patch), the kernel can skip that
bit and instead mark memory as executable via set_memory_x().

Once tag-based KASAN modes start tagging vmalloc allocations, executing
code from such allocations will lead to the PC register getting a tag,
which is not tolerated by the kernel.

Generic kernel code typically allocates memory via module_alloc() if it
intends to mark memory as executable.  (On arm64 module_alloc() uses
__vmalloc_node_range() without setting the executable bit).

Thus, reset pointer tags of pointers returned from module_alloc().

However, on arm64 there's an exception: the eBPF subsystem.  Instead of
using module_alloc(), it uses vmalloc() (via bpf_jit_alloc_exec()) to
allocate its JIT region.

Thus, reset pointer tags of pointers returned from bpf_jit_alloc_exec().

Resetting tags for these pointers results in untagged pointers being
passed to set_memory_x().  This causes conflicts in arithmetic checks in
change_memory_common(), as vm_struct->addr pointer returned by
find_vm_area() is tagged.

Reset pointer tag of find_vm_area(addr)->addr in change_memory_common().

Link: https://lkml.kernel.org/r/b7b2595423340cd7d76b770e5d519acf3b72f0ab.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, vmalloc: only tag normal vmalloc allocations

The kernel can use to allocate executable memory.  The only supported
way to do that is via __vmalloc_node_range() with the executable bit set
in the prot argument.  (vmap() resets the bit via pgprot_nx()).

Once tag-based KASAN modes start tagging vmalloc allocations, executing
code from such allocations will lead to the PC register getting a tag,
which is not tolerated by the kernel.

Only tag the allocations for normal kernel pages.

[andreyknvl@google.com: pass KASAN_VMALLOC_PROT_NORMAL to kasan_unpoison_vmalloc()]
Link: https://lkml.kernel.org/r/9230ca3d3e40ffca041c133a524191fd71969a8d.1646233925.git.andreyknvl@google.com
[andreyknvl@google.com: support tagged vmalloc mappings]
Link: https://lkml.kernel.org/r/2f6605e3a358cf64d73a05710cb3da356886ad29.1646233925.git.andreyknvl@google.com
[andreyknvl@google.com: don't unintentionally disabled poisoning]
Link: https://lkml.kernel.org/r/de4587d6a719232e83c760113e46ed2d4d8da61e.1646757322.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/fbfd9939a4dc375923c9a5c6b9e7ab05c26b8c6b.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, vmalloc: add vmalloc tagging for HW_TAGS

Add vmalloc tagging support to HW_TAGS KASAN.

The key difference between HW_TAGS and the other two KASAN modes when it
comes to vmalloc: HW_TAGS KASAN can only assign tags to physical memory.
The other two modes have shadow memory covering every mapped virtual
memory region.

Make __kasan_unpoison_vmalloc() for HW_TAGS KASAN:

 - Skip non-VM_ALLOC mappings as HW_TAGS KASAN can only tag a single
   mapping of normal physical memory; see the comment in the function.

 - Generate a random tag, tag the returned pointer and the allocation,
   and initialize the allocation at the same time.

 - Propagate the tag into the page stucts to allow accesses through
   page_address(vmalloc_to_page()).

The rest of vmalloc-related KASAN hooks are not needed:

 - The shadow-related ones are fully skipped.

 - __kasan_poison_vmalloc() is kept as a no-op with a comment.

Poisoning and zeroing of physical pages that are backing vmalloc()
allocations are skipped via __GFP_SKIP_KASAN_UNPOISON and
__GFP_SKIP_ZERO: __kasan_unpoison_vmalloc() does that instead.

Enabling CONFIG_KASAN_VMALLOC with HW_TAGS is not yet allowed.

Link: https://lkml.kernel.org/r/d19b2e9e59a9abc59d05b72dea8429dcaea739c6.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, page_alloc: allow skipping memory init for HW_TAGS

Add a new GFP flag __GFP_SKIP_ZERO that allows to skip memory
initialization.  The flag is only effective with HW_TAGS KASAN.

This flag will be used by vmalloc code for page_alloc allocations backing
vmalloc() mappings in a following patch.  The reason to skip memory
initialization for these pages in page_alloc is because vmalloc code will
be initializing them instead.

With the current implementation, when __GFP_SKIP_ZERO is provided,
__GFP_ZEROTAGS is ignored.  This doesn't matter, as these two flags are
never provided at the same time.  However, if this is changed in the
future, this particular implementation detail can be changed as well.

Link: https://lkml.kernel.org/r/0d53efeff345de7d708e0baa0d8829167772521e.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, page_alloc: allow skipping unpoisoning for HW_TAGS

Add a new GFP flag __GFP_SKIP_KASAN_UNPOISON that allows skipping KASAN
poisoning for page_alloc allocations.  The flag is only effective with
HW_TAGS KASAN.

This flag will be used by vmalloc code for page_alloc allocations backing
vmalloc() mappings in a following patch.  The reason to skip KASAN
poisoning for these pages in page_alloc is because vmalloc code will be
poisoning them instead.

Also reword the comment for __GFP_SKIP_KASAN_POISON.

Link: https://lkml.kernel.org/r/35c97d77a704f6ff971dd3bfe4be95855744108e.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, mm: only define ___GFP_SKIP_KASAN_POISON with HW_TAGS

Only define the ___GFP_SKIP_KASAN_POISON flag when CONFIG_KASAN_HW_TAGS is
enabled.

This patch it not useful by itself, but it prepares the code for additions
of new KASAN-specific GFP patches.

Link: https://lkml.kernel.org/r/44e5738a584c11801b2b8f1231898918efc8634a.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, vmalloc: unpoison VM_ALLOC pages after mapping

Make KASAN unpoison vmalloc mappings after they have been mapped in when
it's possible: for vmalloc() (indentified via VM_ALLOC) and vm_map_ram().

The reasons for this are:

 - For vmalloc() and vm_map_ram(): pages don't get unpoisoned in case
   mapping them fails.

 - For vmalloc(): HW_TAGS KASAN needs pages to be mapped to set tags via
   kasan_unpoison_vmalloc().

As a part of these changes, the return value of __vmalloc_node_range() is
changed to area->addr.  This is a non-functional change, as
__vmalloc_area_node() returns area->addr anyway.

Link: https://lkml.kernel.org/r/fcb98980e6fcd3c4be6acdcb5d6110898ef28548.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, vmalloc, arm64: mark vmalloc mappings as pgprot_tagged

HW_TAGS KASAN relies on ARM Memory Tagging Extension (MTE).  With MTE, a
memory region must be mapped as MT_NORMAL_TAGGED to allow setting memory
tags via MTE-specific instructions.

Add proper protection bits to vmalloc() allocations.  These allocations
are always backed by page_alloc pages, so the tags will actually be
getting set on the corresponding physical memory.

Link: https://lkml.kernel.org/r/983fc33542db2f6b1e77b34ca23448d4640bbb9e.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Co-developed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, vmalloc: add vmalloc tagging for SW_TAGS

Add vmalloc tagging support to SW_TAGS KASAN.

 - __kasan_unpoison_vmalloc() now assigns a random pointer tag, poisons
   the virtual mapping accordingly, and embeds the tag into the returned
   pointer.

 - __get_vm_area_node() (used by vmalloc() and vmap()) and
   pcpu_get_vm_areas() save the tagged pointer into vm_struct->addr
   (note: not into vmap_area->addr).

   This requires putting kasan_unpoison_vmalloc() after
   setup_vmalloc_vm[_locked](); otherwise the latter will overwrite the
   tagged pointer. The tagged pointer then is naturally propagateed to
   vmalloc() and vmap().

 - vm_map_ram() returns the tagged pointer directly.

As a result of this change, vm_struct->addr is now tagged.

Enabling KASAN_VMALLOC with SW_TAGS is not yet allowed.

Link: https://lkml.kernel.org/r/4a78f3c064ce905e9070c29733aca1dd254a74f1.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, arm64: reset pointer tags of vmapped stacks

Once tag-based KASAN modes start tagging vmalloc() allocations, kernel
stacks start getting tagged if CONFIG_VMAP_STACK is enabled.

Reset the tag of kernel stack pointers after allocation in
arch_alloc_vmap_stack().

For SW_TAGS KASAN, when CONFIG_KASAN_STACK is enabled, the instrumentation
can't handle the SP register being tagged.

For HW_TAGS KASAN, there's no instrumentation-related issues.  However,
the impact of having a tagged SP register needs to be properly evaluated,
so keep it non-tagged for now.

Note, that the memory for the stack allocation still gets tagged to catch
vmalloc-into-stack out-of-bounds accesses.

[andreyknvl@google.com: fix case when a stack is retrieved from cached_stacks]
Link: https://lkml.kernel.org/r/f50c5f96ef896d7936192c888b0c0a7674e33184.1644943792.git.andreyknvl@google.com
[dan.carpenter@oracle.com: remove unnecessary check in alloc_thread_stack_node()]
Link: https://lkml.kernel.org/r/20220301080706.GB17208@kili
Link: https://lkml.kernel.org/r/698c5ab21743c796d46c15d075b9481825973e34.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, fork: reset pointer tags of vmapped stacks

Once tag-based KASAN modes start tagging vmalloc() allocations, kernel
stacks start getting tagged if CONFIG_VMAP_STACK is enabled.

Reset the tag of kernel stack pointers after allocation in
alloc_thread_stack_node().

For SW_TAGS KASAN, when CONFIG_KASAN_STACK is enabled, the instrumentation
can't handle the SP register being tagged.

For HW_TAGS KASAN, there's no instrumentation-related issues.  However,
the impact of having a tagged SP register needs to be properly evaluated,
so keep it non-tagged for now.

Note, that the memory for the stack allocation still gets tagged to catch
vmalloc-into-stack out-of-bounds accesses.

Link: https://lkml.kernel.org/r/c6c96f012371ecd80e1936509ebcd3b07a5956f7.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, vmalloc: reset tags in vmalloc functions

In preparation for adding vmalloc support to SW/HW_TAGS KASAN, reset
pointer tags in functions that use pointer values in range checks.

vread() is a special case here.  Despite the untagging of the addr pointer
in its prologue, the accesses performed by vread() are checked.

Instead of accessing the virtual mappings though addr directly, vread()
recovers the physical address via page_address(vmalloc_to_page()) and
acceses that.  And as page_address() recovers the pointer tag, the
accesses get checked.

Link: https://lkml.kernel.org/r/046003c5f683cacb0ba18e1079e9688bb3dca943.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: add wrappers for vmalloc hooks

Add wrappers around functions that [un]poison memory for vmalloc
allocations.  These functions will be used by HW_TAGS KASAN and therefore
need to be disabled when kasan=off command line argument is provided.

This patch does no functional changes for software KASAN modes.

Link: https://lkml.kernel.org/r/3b8728eac438c55389fb0f9a8a2145d71dd77487.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: reorder vmalloc hooks

Group functions that [de]populate shadow memory for vmalloc.  Group
functions that [un]poison memory for vmalloc.

This patch does no functional changes but prepares KASAN code for adding
vmalloc support to HW_TAGS KASAN.

Link: https://lkml.kernel.org/r/aeef49eb249c206c4c9acce2437728068da74c28.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, vmalloc: drop outdated VM_KASAN comment

The comment about VM_KASAN in include/linux/vmalloc.c is outdated.
VM_KASAN is currently only used to mark vm_areas allocated for kernel
modules when CONFIG_KASAN_VMALLOC is disabled.

Drop the comment.

Link: https://lkml.kernel.org/r/780395afea83a147b3b5acc36cf2e38f7f8479f9.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, x86, arm64, s390: rename functions for modules shadow

Rename kasan_free_shadow to kasan_free_module_shadow and
kasan_module_alloc to kasan_alloc_module_shadow.

These functions are used to allocate/free shadow memory for kernel modules
when KASAN_VMALLOC is not enabled.  The new names better reflect their
purpose.

Also reword the comment next to their declaration to improve clarity.

Link: https://lkml.kernel.org/r/36db32bde765d5d0b856f77d2d806e838513fe84.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: define KASAN_VMALLOC_INVALID for SW_TAGS

In preparation for adding vmalloc support to SW_TAGS KASAN, provide a
KASAN_VMALLOC_INVALID definition for it.

HW_TAGS KASAN won't be using this value, as it falls back onto page_alloc
for poisoning freed vmalloc() memory.

Link: https://lkml.kernel.org/r/1daaaafeb148a7ae8285265edc97d7ca07b6a07d.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: clean up metadata byte definitions

Most of the metadata byte values are only used for Generic KASAN.

Remove KASAN_KMALLOC_FREETRACK definition for !CONFIG_KASAN_GENERIC case,
and put it along with other metadata values for the Generic mode under a
corresponding ifdef.

Link: https://lkml.kernel.org/r/ac11d6e9e007c95e472e8fdd22efb6074ef3c6d8.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, page_alloc: rework kasan_unpoison_pages call site

Rework the checks around kasan_unpoison_pages() call in post_alloc_hook().

The logical condition for calling this function is:

 - If a software KASAN mode is enabled, we need to mark shadow memory.

 - Otherwise, HW_TAGS KASAN is enabled, and it only makes sense to set
   tags if they haven't already been cleared by tag_clear_highpage(),
   which is indicated by init_tags.

This patch concludes the changes for post_alloc_hook().

Link: https://lkml.kernel.org/r/0ecebd0d7ccd79150e3620ea4185a32d3dfe912f.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, page_alloc: move kernel_init_free_pages in post_alloc_hook

Pull the kernel_init_free_pages() call in post_alloc_hook() out of the big
if clause for better code readability.  This also allows for more
simplifications in the following patch.

This patch does no functional changes.

Link: https://lkml.kernel.org/r/a7a76456501eb37ddf9fca6529cee9555e59cdb1.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, page_alloc: move SetPageSkipKASanPoison in post_alloc_hook

Pull the SetPageSkipKASanPoison() call in post_alloc_hook() out of the big
if clause for better code readability.  This also allows for more
simplifications in the following patches.

Also turn the kasan_has_integrated_init() check into the proper
kasan_hw_tags_enabled() one.  These checks evaluate to the same value, but
logically skipping kasan poisoning has nothing to do with integrated init.

Link: https://lkml.kernel.org/r/7214c1698b754ccfaa44a792113c95cc1f807c48.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, page_alloc: combine tag_clear_highpage calls in post_alloc_hook

Move tag_clear_highpage() loops out of the kasan_has_integrated_init()
clause as a code simplification.

This patch does no functional changes.

Link: https://lkml.kernel.org/r/587e3fc36358b88049320a89cc8dc6deaecb0cda.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, page_alloc: merge kasan_alloc_pages into post_alloc_hook

Currently, the code responsible for initializing and poisoning memory in
post_alloc_hook() is scattered across two locations: kasan_alloc_pages()
hook for HW_TAGS KASAN and post_alloc_hook() itself.  This is confusing.

This and a few following patches combine the code from these two
locations.  Along the way, these patches do a step-by-step restructure the
many performed checks to make them easier to follow.

Replace the only caller of kasan_alloc_pages() with its implementation.

As kasan_has_integrated_init() is only true when CONFIG_KASAN_HW_TAGS is
enabled, moving the code does no functional changes.

Also move init and init_tags variables definitions out of
kasan_has_integrated_init() clause in post_alloc_hook(), as they have the
same values regardless of what the if condition evaluates to.

This patch is not useful by itself but makes the simplifications in the
following patches easier to follow.

Link: https://lkml.kernel.org/r/5ac7e0b30f5cbb177ec363ddd7878a3141289592.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, page_alloc: refactor init checks in post_alloc_hook

Separate code for zeroing memory from the code clearing tags in
post_alloc_hook().

This patch is not useful by itself but makes the simplifications in the
following patches easier to follow.

This patch does no functional changes.

Link: https://lkml.kernel.org/r/2283fde963adfd8a2b29a92066f106cc16661a3c.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: only apply __GFP_ZEROTAGS when memory is zeroed

__GFP_ZEROTAGS should only be effective if memory is being zeroed.
Currently, hardware tag-based KASAN violates this requirement.

Fix by including an initialization check along with checking for
__GFP_ZEROTAGS.

Link: https://lkml.kernel.org/r/f4f4593f7f675262d29d07c1938db5bd0cd5e285.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: clarify __GFP_ZEROTAGS comment

__GFP_ZEROTAGS is intended as an optimization: if memory is zeroed during
allocation, it's possible to set memory tags at the same time with little
performance impact.

Clarify this intention of __GFP_ZEROTAGS in the comment.

Link: https://lkml.kernel.org/r/cdffde013973c5634a447513e10ec0d21e8eee29.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: drop skip_kasan_poison variable in free_pages_prepare

skip_kasan_poison is only used in a single place.  Call
should_skip_kasan_poison() directly for simplicity.

Link: https://lkml.kernel.org/r/1d33212e79bc9ef0b4d3863f903875823e89046f.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, page_alloc: init memory of skipped pages on free

Since commit 7a3b83537188 ("kasan: use separate (un)poison implementation
for integrated init"), when all init, kasan_has_integrated_init(), and
skip_kasan_poison are true, free_pages_prepare() doesn't initialize the
page.  This is wrong.

Fix it by remembering whether kasan_poison_pages() performed
initialization, and call kernel_init_free_pages() if it didn't.

Reordering kasan_poison_pages() and kernel_init_free_pages() is OK, since
kernel_init_free_pages() can handle poisoned memory.

Link: https://lkml.kernel.org/r/1d97df75955e52727a3dc1c4e33b3b50506fc3fd.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, page_alloc: simplify kasan_poison_pages call site

Simplify the code around calling kasan_poison_pages() in
free_pages_prepare().

This patch does no functional changes.

Link: https://lkml.kernel.org/r/ae4f9bcf071577258e786bcec4798c145d718c46.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, page_alloc: merge kasan_free_pages into free_pages_prepare

Currently, the code responsible for initializing and poisoning memory in
free_pages_prepare() is scattered across two locations: kasan_free_pages()
for HW_TAGS KASAN and free_pages_prepare() itself.  This is confusing.

This and a few following patches combine the code from these two
locations.  Along the way, these patches also simplify the performed
checks to make them easier to follow.

Replaces the only caller of kasan_free_pages() with its implementation.

As kasan_has_integrated_init() is only true when CONFIG_KASAN_HW_TAGS is
enabled, moving the code does no functional changes.

This patch is not useful by itself but makes the simplifications in the
following patches easier to follow.

Link: https://lkml.kernel.org/r/303498d15840bb71905852955c6e2390ecc87139.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, page_alloc: move tag_clear_highpage out of kernel_init_free_pages

Currently, kernel_init_free_pages() serves two purposes: it either only
zeroes memory or zeroes both memory and memory tags via a different code
path.  As this function has only two callers, each using only one code
path, this behaviour is confusing.

Pull the code that zeroes both memory and tags out of
kernel_init_free_pages().

As a result of this change, the code in free_pages_prepare() starts to
look complicated, but this is improved in the few following patches.
Those improvements are not integrated into this patch to make diffs easier
to read.

This patch does no functional changes.

Link: https://lkml.kernel.org/r/7719874e68b23902629c7cf19f966c4fd5f57979.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan, page_alloc: deduplicate should_skip_kasan_poison

Patch series "kasan, vmalloc, arm64: add vmalloc tagging support for SW/HW_TAGS", v6.

This patchset adds vmalloc tagging support for SW_TAGS and HW_TAGS
KASAN modes.

About half of patches are cleanups I went for along the way.  None of them
seem to be important enough to go through stable, so I decided not to
split them out into separate patches/series.

The patchset is partially based on an early version of the HW_TAGS
patchset by Vincenzo that had vmalloc support.  Thus, I added a
Co-developed-by tag into a few patches.

SW_TAGS vmalloc tagging support is straightforward.  It reuses all of the
generic KASAN machinery, but uses shadow memory to store tags instead of
magic values.  Naturally, vmalloc tagging requires adding a few
kasan_reset_tag() annotations to the vmalloc code.

HW_TAGS vmalloc tagging support stands out.  HW_TAGS KASAN is based on Arm
MTE, which can only assigns tags to physical memory.  As a result, HW_TAGS
KASAN only tags vmalloc() allocations, which are backed by page_alloc
memory.  It ignores vmap() and others.

This patch (of 39):

Currently, should_skip_kasan_poison() has two definitions: one for when
CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, one for when it's not.

Instead of duplicating the checks, add a deferred_pages_enabled() helper
and use it in a single should_skip_kasan_poison() definition.

Also move should_skip_kasan_poison() closer to its caller and clarify all
conditions in the comment.

Link: https://lkml.kernel.org/r/cover.1643047180.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/658b79f5fb305edaf7dc16bc52ea870d3220d4a8.1643047180.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/migration: add trace events for base page and HugeTLB migrations

This adds two trace events for base page and HugeTLB page migrations.
These events, closely follow the implementation details like setting and
removing of PTE migration entries, which are essential operations for
migration.  The new CREATE_TRACE_POINTS in <mm/rmap.c> covers both
<events/migration.h> and <events/tlb.h> based trace events.  Hence drop
redundant CREATE_TRACE_POINTS from other places which could have otherwise
conflicted during build.

Link: https://lkml.kernel.org/r/1643368182-9588-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/migration: add trace events for THP migrations

Patch series "mm/migration: Add trace events", v3.

This adds trace events for all migration scenarios including base page,
THP and HugeTLB.

This patch (of 3):

This adds two trace events for PMD based THP migration without split.
These events closely follow the implementation details like setting and
removing of PMD migration entries, which are essential operations for THP
migration.  This moves CREATE_TRACE_POINTS into generic THP from powerpc
for these new trace events to be available on other platforms as well.

Link: https://lkml.kernel.org/r/1643368182-9588-1-git-send-email-anshuman.khandual@arm.com
Link: https://lkml.kernel.org/r/1643368182-9588-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/thp: fix NR_FILE_MAPPED accounting in page_*_file_rmap()

NR_FILE_MAPPED accounting in mm/rmap.c (for /proc/meminfo "Mapped" and
/proc/vmstat "nr_mapped" and the memcg's memory.stat "mapped_file") is
slightly flawed for file or shmem huge pages.

It is well thought out, and looks convincing, but there's a racy case when
the careful counting in page_remove_file_rmap() (without page lock) gets
discarded.  So that in a workload like two "make -j20" kernel builds under
memory pressure, with cc1 on hugepage text, "Mapped" can easily grow by a
spurious 5MB or more on each iteration, ending up implausibly bigger than
most other numbers in /proc/meminfo.  And, hypothetically, might grow to
the point of seriously interfering in mm/vmscan.c's heuristics, which do
take NR_FILE_MAPPED into some consideration.

Fixed by moving the __mod_lruvec_page_state() down to where it will not be
missed before return (and I've grown a bit tired of that oft-repeated
but-not-everywhere comment on the __ness: it gets lost in the move here).

Does page_add_file_rmap() need the same change?  I suspect not, because
page lock is held in all relevant cases, and its skipping case looks safe;
but it's much easier to be sure, if we do make the same change.

Link: https://lkml.kernel.org/r/e02e52a1-8550-a57c-ed29-f51191ea2375@google.com
Fixes: dd78fedde4b9 ("rmap: support file thp")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: filemap_unaccount_folio() large skip mapcount fixup

The page_mapcount_reset() when folio_mapped() while mapping_exiting() was
devised long before there were huge or compound pages in the cache.  It is
still valid for small pages, but not at all clear what's right to check
and reset on large pages.  Just don't try when folio_test_large().

Link: https://lkml.kernel.org/r/879c4426-4122-da9c-1a86-697f2c9a083@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: delete __ClearPageWaiters()

The PG_waiters bit is not included in PAGE_FLAGS_CHECK_AT_FREE, and
vmscan.c's free_unref_page_list() callers rely on that not to generate
bad_page() alerts.  So __page_cache_release(), put_pages_list() and
release_pages() (and presumably copy-and-pasted free_zone_device_page())
are redundant and misleading to make a special point of clearing it (as
the "__" implies, it could only safely be used on the freeing path).

Delete __ClearPageWaiters().  Remark on this in one of the "possible"
comments in folio_wake_bit(), and delete the superfluous comments.

Link: https://lkml.kernel.org/r/3eafa969-5b1a-accf-88fe-318784c791a@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftest/vm: add helpers to detect PAGE_SIZE and PAGE_SHIFT

PAGE_SIZE is not 4096 in many configurations, particularly ppc64 uses 64K
pages in majority of cases.

Add helpers to detect PAGE_SIZE and PAGE_SHIFT dynamically.

Without this tests are broken w.r.t reading /proc/self/pagemap

    if (pread(pagemap_fd, ent, sizeof(ent),
              (uintptr_t)ptr >> (PAGE_SHIFT - 3)) != sizeof(ent))
              err(2, "read pagemap");

Link: https://lkml.kernel.org/r/20220307054355.149820-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftest/vm: add util.h and and move helper functions there

Avoid code duplication by adding util.h.  No functional change in this
patch.

Link: https://lkml.kernel.org/r/20220307054355.149820-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: unexport page_init_poison

page_init_poison is only used in core MM code, so unexport it.

Link: https://lkml.kernel.org/r/20220207063446.1833404-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/vm/page_owner_sort.c: support for user-defined culling rules

When viewing page owner information, we may want to cull blocks of
information with our own rules.  So it is important to enhance culling
function to provide the support for customizing culling rules.
Therefore, following adjustments are made:

1. Add --cull option to support the culling of blocks of information
   with user-defined culling rules.

./page_owner_sort <input> <output> --cull=<rules>
./page_owner_sort <input> <output> --cull <rules>

  <rules> is a single argument in the form of a comma-separated list to
  specify individual culling rules, by the sequence of keys k1,k2, ....
  Mixed use of abbreviated and complete-form of keys is allowed.

  For reference, please see the document(Documentation/vm/page_owner.rst).

Now, assuming two blocks in the input file are as follows:

Page allocated via order 0, mask xxxx, pid 1, tgid 1 (task_name_demo)
PFN xxxx
 prep_new_page+0xd0/0xf8
 get_page_from_freelist+0x4a0/0x1290
 __alloc_pages+0x168/0x340
 alloc_pages+0xb0/0x158

Page allocated via order 0, mask xxxx, pid 32, tgid 32 (task_name_demo)
PFN xxxx
 prep_new_page+0xd0/0xf8
 get_page_from_freelist+0x4a0/0x1290
 __alloc_pages+0x168/0x340
 alloc_pages+0xb0/0x158

If we want to cull the blocks by stacktrace and task command name, we can
use this command:

./page_owner_sort <input> <output> --cull=stacktrace,name

The output would be like:

2 times, 2 pages, task_comm_name: task_name_demo
 prep_new_page+0xd0/0xf8
 get_page_from_freelist+0x4a0/0x1290
 __alloc_pages+0x168/0x340
 alloc_pages+0xb0/0x158

As we can see, these two blocks are culled successfully, for they share
the same pid and task command name.

However, if we want to cull the blocks by pid, stacktrace and task command
name, we can this command:

./page_owner_sort <input> <output> --cull=stacktrace,name,pid

The output would be like:

1 times, 1 pages, PID 1, task_comm_name: task_name_demo
 prep_new_page+0xd0/0xf8
 get_page_from_freelist+0x4a0/0x1290
 __alloc_pages+0x168/0x340
 alloc_pages+0xb0/0x158

1 times, 1 pages, PID 32, task_comm_name: task_name_demo
 prep_new_page+0xd0/0xf8
 get_page_from_freelist+0x4a0/0x1290
 __alloc_pages+0x168/0x340
 alloc_pages+0xb0/0x158

As we can see, these two blocks are failed to cull, for their PIDs are
different.

2. Add explanations of --cull options to the document.

This work is coauthored by
Yixuan Cao
Shenghong Han
Yinan Zhang
Chongxi Zhao
Yuhong Feng

Link: https://lkml.kernel.org/r/20220312145834.624-1-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Cc: Yuhong Feng <yuhongf@szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/vm/page_owner_sort.c: support for selecting by PID, TGID or task command name

When viewing page owner information, we may also need to select the blocks
by PID, TGID or task command name, which helps to get more accurate page
allocation information as needed.

Therefore, following adjustments are made:

1. Add three new options, including --pid, --tgid and --name, to support
   the selection of information blocks by a specific pid, tgid and task
   command name. In addtion, multiple options are allowed to be used at
   the same time.

./page_owner_sort [input] [output] --pid <PID>
./page_owner_sort [input] [output] --tgid <TGID>
./page_owner_sort [input] [output] --name <TASK_COMMAND_NAME>

   Assuming a scenario when a multi-threaded program, ./demo (PID =
   5280), is running, and ./demo creates a child process (PID = 5281).

$ps
PID   TTY        TIME   CMD
5215  pts/0    00:00:00  bash
5280  pts/0    00:00:00  ./demo
5281  pts/0    00:00:00  ./demo
5282  pts/0    00:00:00  ps

   It would be better to filter out the records with tgid=5280 and the
   task name "demo" when debugging the parent process, and the specific
   usage is

./page_owner_sort [input] [output] --tgid 5280 --name demo

2. Add explanations of three new options, including --pid, --tgid and
   --name, to the document.

This work is coauthored by
Shenghong Han <hanshenghong2019@email.szu.edu.cn>,
Yixuan Cao <caoyixuan2019@email.szu.edu.cn>,
Yinan Zhang <zhangyinan2019@email.szu.edu.cn>,
Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>,
Yuhong Feng <yuhongf@szu.edu.cn>.

Link: https://lkml.kernel.org/r/1646835223-7584-1-git-send-email-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/vm/page_owner_sort: support for sorting by task command name

When viewing page owner information, we may also need to the block to be
sorted by task command name.  Therefore, the following adjustments are
made:

1. Add a member variable to record task command name of block.

2. Add a new -n option to sort the information of blocks by task command
   name.

3. Add -n option explanation in the document.

Link: https://lkml.kernel.org/r/20220306030640.43054-2-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: <zhaochongxi2019@email.szu.edu.cn>
Cc: <hanshenghong2019@email.szu.edu.cn>
Cc: <zhangyinan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/vm/page_owner_sort: fix three trivival places

The following adjustments are made:

1. Instead of using another array to cull the blocks after sorting,
   reuse the old array.  So there is no need to malloc a new array.

2. When enabling '-f' option to filter out the blocks which have been
   released, only add those have not been released in the list, rather
   than add all of blocks in the list and then do the filtering when
   printing the result.

3. When enabling '-c' option to cull the blocks by comparing
   stacktrace, print the stacetrace rather than the total block.

Link: https://lkml.kernel.org/r/20220306030640.43054-1-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: <hanshenghong2019@email.szu.edu.cn>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: <zhangyinan2019@email.szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/vm/page_owner_sort.c: support sorting by tgid and update documentation

When the "page owner" information is read, the information sorted
by TGID is expected.

As a result, the following adjustments have been made:

1. Add a new -P option to sort the information of blocks by TGID in
   ascending order.

2. Adjust the order of member variables in block_list strust to avoid
   one 4 byte hole.

3. Add -P option explanation in the document.

Link: https://lkml.kernel.org/r/20220301151438.166118-3-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/vm/page_owner_sort.c: add a security check

Add a security check after using malloc() to allocate memory.

Link: https://lkml.kernel.org/r/20220301151438.166118-2-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/vm/page_owner_sort.c: fix comments

Two adjustments are made:

1. Correct a grammatical error: replace the "what" in "Do the job what
   you want to debug" with "that".

2. Replace "has not been" with "has been" in the description of the -f
   option: According to Commit b1c9ba071e7d ("tools/vm/page_owner_sort.c:
   fix the instructions for use"), the description of the "-f" option is
   "Filter out the information of blocks whose memory has been released."

Link: https://lkml.kernel.org/r/20220301151438.166118-1-yejiajian2018@email.szu.edu.cn
Signed-off-by: Jiajian Ye <yejiajian2018@email.szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/vm/page_owner_sort.c: fix the instructions for use

I noticed a discrepancy between the usage method and the code logic.

If we enable the -f option, it should be "Filter out the information of
blocks whose memory has been released".

Link: https://lkml.kernel.org/r/20220219143106.2805-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_owner.c: record tgid

In a single-threaded process, the pid in kernel task_struct is the same
as the tgid, which can mark the process of page allocation.  But in a
multithreaded process, only the task_struct of the thread leader has the
same pid as tgid, and the pids of other threads are different from tgid.
Therefore, tgid is recorded to provide effective information for
debugging and data statistics of multithreaded programs.

This can also be achieved by observing the task name (executable file
name) for a specific process.  However, when the same program is started
multiple times, the task name is the same and the tgid is different.
Therefore, in the debugging of multi-threaded programs, combined with
the task name and tgid, more accurate runtime information of a certain
run of the program can be obtained.

Link: https://lkml.kernel.org/r/20220219180450.2399-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Waiman Long <longman@redhat.com>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_owner: record task command name

The page_owner information currently includes the pid of the calling
task.  That is useful as long as the task is still running.  Otherwise,
the number is meaningless.  To have more information about the
allocating tasks that had exited by the time the page_owner information
is retrieved, we need to store the command name of the task.

Add a new comm field into page_owner structure to store the command name
and display it when the page_owner information is retrieved.

Link: https://lkml.kernel.org/r/20220202203036.744010-5-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_owner: print memcg information

It was found that a number of offline memcgs were not freed because they
were pinned by some charged pages that were present.  Even "echo 1 >
/proc/sys/vm/drop_caches" wasn't able to free those pages.  These
offline but not freed memcgs tend to increase in number over time with
the side effect that percpu memory consumption as shown in /proc/meminfo
also increases over time.

In order to find out more information about those pages that pin offline
memcgs, the page_owner feature is extended to print memory cgroup
information especially whether the cgroup is offline or not.  RCU read
lock is taken when memcg is being accessed to make sure that it won't be
freed.

Link: https://lkml.kernel.org/r/20220202203036.744010-4-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_owner: use scnprintf() to avoid excessive buffer overrun check

The snprintf() function can return a length greater than the given input
size.  That will require a check for buffer overrun after each
invocation of snprintf().  scnprintf(), on the other hand, will never
return a greater length.

By using scnprintf() in selected places, we can avoid some buffer
overrun checks except after stack_depot_snprint() and after the last
snprintf().

Link: https://lkml.kernel.org/r/20220202203036.744010-3-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/vsprintf: avoid redundant work with 0 size

Patch series "mm/page_owner: Extend page_owner to show memcg information", v4.

While debugging the constant increase in percpu memory consumption on a
system that spawned large number of containers, it was found that a lot
of offline mem_cgroup structures remained in place without being freed.
Further investigation indicated that those mem_cgroup structures were
pinned by some pages.

In order to find out what those pages are, the existing page_owner
debugging tool is extended to show memory cgroup information and whether
those memcgs are offline or not.  With the enhanced page_owner tool, the
following is a typical page that pinned the mem_cgroup structure in my
test case:

  Page allocated via order 0, mask 0x1100cca(GFP_HIGHUSER_MOVABLE), pid 162970 (podman), ts 1097761405537 ns, free_ts 1097760838089 ns
  PFN 1925700 type Movable Block 3761 type Movable Flags 0x17ffffc00c001c(uptodate|dirty|lru|reclaim|swapbacked|node=0|zone=2|lastcpupid=0x1fffff)
    prep_new_page+0xac/0xe0
    get_page_from_freelist+0x1327/0x14d0
    __alloc_pages+0x191/0x340
    alloc_pages_vma+0x84/0x250
    shmem_alloc_page+0x3f/0x90
    shmem_alloc_and_acct_page+0x76/0x1c0
    shmem_getpage_gfp+0x281/0x940
    shmem_write_begin+0x36/0xe0
    generic_perform_write+0xed/0x1d0
    __generic_file_write_iter+0xdc/0x1b0
    generic_file_write_iter+0x5d/0xb0
    new_sync_write+0x11f/0x1b0
    vfs_write+0x1ba/0x2a0
    ksys_write+0x59/0xd0
    do_syscall_64+0x37/0x80
    entry_SYSCALL_64_after_hwframe+0x44/0xae
  Charged to offline memcg libpod-conmon-15e4f9c758422306b73b2dd99f9d50a5ea53cbb16b4a13a2c2308a4253cc0ec8.

So the page was not freed because it was part of a shmem segment.  That
is useful information that can help users to diagnose similar problems.

With cgroup v1, /proc/cgroups can be read to find out the total number
of memory cgroups (online + offline).  With cgroup v2, the cgroup.stat
of the root cgroup can be read to find the number of dying cgroups (most
likely pinned by dying memcgs).

The page_owner feature is not supposed to be enabled for production
system due to its memory overhead.  However, if it is suspected that
dying memcgs are increasing over time, a test environment with
page_owner enabled can then be set up with appropriate workload for
further analysis on what may be causing the increasing number of dying
memcgs.

This patch (of 4):

For *scnprintf(), vsnprintf() is always called even if the input size is
0.  That is a waste of time, so just return 0 in this case.

Note that vsnprintf() will never return -1 to indicate an error.  So
skipping the call to vsnprintf() when size is 0 will have no functional
impact at all.

Link: https://lkml.kernel.org/r/20220202203036.744010-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20220202203036.744010-2-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/vm/page_owner.rst: fix unexpected indentation warns

Fix Unexpected indentation warns in page_owner:

  Documentation/vm/page_owner.rst:92: WARNING: Unexpected indentation.
  Documentation/vm/page_owner.rst:96: WARNING: Unexpected indentation.
  Documentation/vm/page_owner.rst:107: WARNING: Unexpected indentation.

Link: https://lkml.kernel.org/r/20211215001929.47866-1-skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/vm/page_owner.rst: update the documentation

Update the documentation of ``page_owner``.

[akpm@linux-foundation.org: small grammatical tweaks]

Link: https://lkml.kernel.org/r/20211214134736.2569-1-hanshenghong2019@email.szu.edu.cn
Signed-off-by: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Georgi Djakov <georgi.djakov@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/vm/page_owner_sort.c: delete invalid duplicate code

I noticed that there is two invalid lines of duplicate code.  It's better
to delete it.

Link: https://lkml.kernel.org/r/20211213095743.3630-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/vm/page_owner_sort.c: two trivial fixes

1) There is an unused variable. It's better to delete it.
2) One case is missing in the usage().

Link: https://lkml.kernel.org/r/20211213164518.2461-1-hanshenghong2019@email.szu.edu.cn
Signed-off-by: Shenghong Han <hanshenghong2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/vm/page_owner_sort.c: support sorting pid and time

When viewing the page owner information, we expect that the information
can be sorted by PID, so that we can quickly combine PID with the program
to check the information together.

We also expect that the information can be sorted by time.  Time sorting
helps to view the running status of the program according to the time
interval when the program hangs up.

Finally, we hope to pass the page_ owner_ Sort.  C can reduce part of the
output and only output the plate information whose memory has not been
released, which can make us locate the problem of the program faster.
Therefore, the following adjustments have been made:

1. Add the static functions search_pattern and check_regcomp to
   improve the cleanliness.

2. Add member attributes and their corresponding sorting methods.  In
   terms of comparison time, int will overflow because the data of ull is
   too large, so the ternary operator is used

3. Add the -f parameter to filter out the information of blocks whose
   memory has not been released

Link: https://lkml.kernel.org/r/20211206165653.5093-1-zhaochongxi2019@email.szu.edu.cn
Signed-off-by: Chongxi Zhao <zhaochongxi2019@email.szu.edu.cn>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/vm/page_owner_sort.c: add switch between culling by stacktrace and txt

Culling by comparing stacktrace would casue loss of some information.  For
example, if there exists 2 blocks which have the same stacktrace and the
different head info

  Page allocated via order 0, mask 0x108c48(...), pid 73696,
    ts 1578829190639010 ns, free_ts 1576583851324450 ns
    prep_new_page+0x80/0xb8
    get_page_from_freelist+0x924/0xee8
    __alloc_pages+0x138/0xc18
    alloc_pages+0x80/0xf0
    __page_cache_alloc+0x90/0xc8

  Page allocated via order 0, mask 0x108c48(...), pid 61806,
    ts 1354113726046100 ns, free_ts 1354104926841400 ns
    prep_new_page+0x80/0xb8
    get_page_from_freelist+0x924/0xee8
    __alloc_pages+0x138/0xc18
    alloc_pages+0x80/0xf0
    __page_cache_alloc+0x90/0xc8

After culling, it would be like this

  2 times, 2 pages:
  Page allocated via order 0, mask 0x108c48(...), pid 73696,
    ts 1578829190639010 ns, free_ts 1576583851324450 ns
    prep_new_page+0x80/0xb8
    get_page_from_freelist+0x924/0xee8
    __alloc_pages+0x138/0xc18
    alloc_pages+0x80/0xf0
    __page_cache_alloc+0x90/0xc8

The info of second block missed.  So, add -c to turn on culling by
stacktrace.  By default, it will cull by txt.

Link: https://lkml.kernel.org/r/20211129145658.2491-1-zhangyinan2019@email.szu.edu.cn
Signed-off-by: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Cc: Changhee Han <ch0.han@lge.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/vm/page_owner_sort.c: support sorting by stack trace

This adds the ability to sort by stacktraces.  This is helpful when
comparing multiple dumps of page_owner taken at different times, since
blocks will not be reordered if they were allocated/free'd.

Link: https://lkml.kernel.org/r/20211124193709.1805776-2-seanga2@gmail.com
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Cc: Zhenliang Wei <weizhenliang@huawei.com>
Cc: Changhee Han <ch0.han@lge.com>
Cc: Tang Bin <tangbin@cmss.chinamobile.com>
Cc: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yinan Zhang <zhangyinan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>