git.monstr.eu Git - linux-2.6-microblaze.git/log

x86/vdso: Add time napespace page

To support time namespaces in the VDSO with a minimal impact on regular non
time namespace affected tasks, the namespace handling needs to be hidden in
a slow path.

The most obvious place is vdso_seq_begin(). If a task belongs to a time
namespace then the VVAR page which contains the system wide VDSO data is
replaced with a namespace specific page which has the same layout as the
VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path
and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time
namespace handling path.

The extra check in the case that vdso_data->seq is odd, e.g. a concurrent
update of the VDSO data is in progress, is not really affecting regular
tasks which are not part of a time namespace as the task is spin waiting
for the update to finish and vdso_data->seq to become even again.

If a time namespace task hits that code path, it invokes the corresponding
time getter function which retrieves the real VVAR page, reads host time
and then adds the offset for the requested clock which is stored in the
special VVAR page.

Allocate the time namespace page among VVAR pages and place vdso_data on
it. Provide __arch_get_timens_vdso_data() helper for VDSO code to get the
code-relative position of VVARs on that special page.

Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-23-dima@arista.com

x86/vdso: Provide vdso_data offset on vvar_page

VDSO support for time namespaces needs to set up a page with the same
layout as VVAR. That timens page will be placed on position of VVAR page
inside namespace. That page has vdso_data->seq set to 1 to enforce
the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce
the time namespace handling path.

To prepare the time namespace page the kernel needs to know the vdso_data
offset. Provide arch_get_vdso_data() helper for locating vdso_data on VVAR
page.

Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-22-dima@arista.com

lib/vdso: Prepare for time namespace support

To support time namespaces in the vdso with a minimal impact on regular non
time namespace affected tasks, the namespace handling needs to be hidden in
a slow path.

The most obvious place is vdso_seq_begin(). If a task belongs to a time
namespace then the VVAR page which contains the system wide vdso data is
replaced with a namespace specific page which has the same layout as the
VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path
and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time
namespace handling path.

The extra check in the case that vdso_data->seq is odd, e.g. a concurrent
update of the vdso data is in progress, is not really affecting regular
tasks which are not part of a time namespace as the task is spin waiting
for the update to finish and vdso_data->seq to become even again.

If a time namespace task hits that code path, it invokes the corresponding
time getter function which retrieves the real VVAR page, reads host time
and then adds the offset for the requested clock which is stored in the
special VVAR page.

If VDSO time namespace support is disabled the whole magic is compiled out.

Initial testing shows that the disabled case is almost identical to the
host case which does not take the slow timens path. With the special timens
page installed the performance hit is constant time and in the range of
5-7%.

For the vdso functions which are not using the sequence count an
unconditional check for vdso_data->clock_mode is added which switches to
the real vdso when the clock_mode is VCLOCK_TIMENS.

[avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data
pointer by CS_RAW offset.]

Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com

x86/vdso: Restrict splitting VVAR VMA

Forbid splitting VVAR VMA resulting in a stricter ABI and reducing the
amount of corner-cases to consider while working further on VDSO time
namespace support.

As the offset from timens to VVAR page is computed compile-time, the pages
in VVAR should stay together and not being partically mremap()'ed.

Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-20-dima@arista.com

fs/proc: Respect boottime inside time namespace for /proc/uptime

Make sure that /proc/uptime is adjusted to the tasks time namespace.

Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-19-dima@arista.com

posix-timers: Make clock_nanosleep() time namespace aware

clock_nanosleep() accepts absolute values of expiration time, if the
TIMER_ABSTIME flag is set. This value is in the tasks time namespace,
which has to be converted to the host time namespace.

Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-18-dima@arista.com

hrtimers: Prepare hrtimer_nanosleep() for time namespaces

clock_nanosleep() accepts absolute values of expiration time when
TIMER_ABSTIME flag is set. This absolute value is inside the task's
time namespace, and has to be converted to the host's time.

There is timens_ktime_to_host() helper for converting time, but
it accepts ktime argument.

As a preparation, make hrtimer_nanosleep() accept a clock value in ktime
instead of timespec64.

Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-17-dima@arista.com

alarmtimer: Make nanosleep() time namespace aware

clock_nanosleep() accepts absolute values of expiration time when the
TIMER_ABSTIME flag is set. This absolute value is inside the task's
time namespace and has to be converted to the host's time.

Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-16-dima@arista.com

posix-timers: Make timer_settime() time namespace aware

Wire timer_settime() syscall into time namespace virtualization.

sys_timer_settime() calls the ktime->timer_set() callback. Right now,
common_timer_set() is the only implementation for the callback.

The user-supplied expiry value is converted from timespec64 to ktime and
then timens_ktime_to_host() can be used to convert namespace's time to the
host time.

Inside a time namespace kernel's time differs by a fixed offset from a
user-supplied time, but only absolute values (TIMER_ABSTIME) must be
converted.

Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-15-dima@arista.com

timerfd: Make timerfd_settime() time namespace aware

timerfd_settime() accepts an absolute value of the expiration time if
TFD_TIMER_ABSTIME is specified. This value is in the task's time namespace
and has to be converted to the host's time namespace.

Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-14-dima@arista.com

time: Add do_timens_ktime_to_host() helper

The helper subtracts namespace's clock offset from the given time
and ensures that the result is within [0, KTIME_MAX].

Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-13-dima@arista.com

posix-clocks: Wire up clock_gettime() with timens offsets

Adjust monotonic and boottime clocks with per-timens offsets. As the
result a process inside time namespace will see timers and clocks corrected
to offsets that were set when the namespace was created

Note that applications usually go through vDSO to get time, which is not
yet adjusted. Further changes will complete time namespace virtualisation
with vDSO support.

Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-12-dima@arista.com

posix-timers: Use clock_get_ktime() in common_timer_get()

Now, when the clock_get_ktime() callback exists, the suboptimal
timespec64-based conversion can be removed from common_timer_get().

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-11-dima@arista.com

posix-clocks: Introduce clock_get_ktime() callback

The callsite in common_timer_get() has already a comment:
    /*
     * The timespec64 based conversion is suboptimal, but it's not
     * worth to implement yet another callback.
     */
    kc->clock_get(timr->it_clock, &ts64);
    now = timespec64_to_ktime(ts64);

The upcoming support for time namespaces requires to have access to:

- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()

That adds a valid reason to finally implement a separate callback which
returns the time in ktime_t format.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-10-dima@arista.com

alarmtimer: Provide get_timespec() callback

The upcoming support for time namespaces requires to have access to:

- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()

Wire up alarm bases with get_timespec().

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-9-dima@arista.com

alarmtimer: Rename gettime() callback to get_ktime()

The upcoming support for time namespaces requires to have access to:

- The time in a tasks time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()

struct alarm_base needs to follow the same naming convention, so rename
.gettime() callback into get_ktime() as a preparation for introducing
get_timespec().

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-8-dima@arista.com

posix-clocks: Rename .clock_get_timespec() callbacks accordingly

The upcoming support for time namespaces requires to have access to:

- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()

That adds a valid reason to finally implement a separate callback which
returns the time in ktime_t format in (struct k_clock).

As a preparation ground for introducing clock_get_ktime(), the original
callback clock_get() was renamed into clock_get_timespec().
Reflect the renaming into the callback implementations.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-7-dima@arista.com

posix-clocks: Rename the clock_get() callback to clock_get_timespec()

The upcoming support for time namespaces requires to have access to:

- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()

That adds a valid reason to finally implement a separate callback which
returns the time in ktime_t format, rather than in (struct timespec).

Rename the clock_get() callback to clock_get_timespec() as a preparation
for introducing clock_get_ktime().

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-6-dima@arista.com

time: Add timens_offsets to be used for tasks in time namespace

Introduce offsets for time namespace. They will contain an adjustment
needed to convert clocks to/from host's.

A new namespace is created with the same offsets as the time namespace
of the current process.

Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-5-dima@arista.com

ns: Introduce Time Namespace

Time Namespace isolates clock values.

The kernel provides access to several clocks CLOCK_REALTIME,
CLOCK_MONOTONIC, CLOCK_BOOTTIME, etc.

CLOCK_REALTIME
      System-wide clock that measures real (i.e., wall-clock) time.

CLOCK_MONOTONIC
      Clock that cannot be set and represents monotonic time since
      some unspecified starting point.

CLOCK_BOOTTIME
      Identical to CLOCK_MONOTONIC, except it also includes any time
      that the system is suspended.

For many users, the time namespace means the ability to changes date and
time in a container (CLOCK_REALTIME). Providing per namespace notions of
CLOCK_REALTIME would be complex with a massive overhead, but has a dubious
value.

But in the context of checkpoint/restore functionality, monotonic and
boottime clocks become interesting. Both clocks are monotonic with
unspecified starting points. These clocks are widely used to measure time
slices and set timers. After restoring or migrating processes, it has to be
guaranteed that they never go backward. In an ideal case, the behavior of
these clocks should be the same as for a case when a whole system is
suspended. All this means that it is required to set CLOCK_MONOTONIC and
CLOCK_BOOTTIME clocks, which can be achieved by adding per-namespace
offsets for clocks.

A time namespace is similar to a pid namespace in the way how it is
created: unshare(CLONE_NEWTIME) system call creates a new time namespace,
but doesn't set it to the current process. Then all children of the process
will be born in the new time namespace, or a process can use the setns()
system call to join a namespace.

This scheme allows setting clock offsets for a namespace, before any
processes appear in it.

All available clone flags have been used, so CLONE_NEWTIME uses the highest
bit of CSIGNAL. It means that it can be used only with the unshare() and
the clone3() system calls.

[ tglx: Adjusted paragraph about clone3() to reality and massaged the
   changelog a bit. ]

Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://criu.org/Time_namespace
Link: https://lists.openvz.org/pipermail/criu/2018-June/041504.html
Link: https://lore.kernel.org/r/20191112012724.250792-4-dima@arista.com

lib/vdso: Mark do_hres() and do_coarse() as __always_inline

Performance numbers for Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz
(more clock_gettime() cycles - the better):

clock            | before     | after      | diff
----------------------------------------------------------
monotonic        |  153222105 |  166775025 | 8.8%
monotonic-coarse |  671557054 |  691513017 | 3.0%
monotonic-raw    |  147116067 |  161057395 | 9.5%
boottime         |  153446224 |  166962668 | 9.1%

The improvement for arm64 for monotonic and boottime is around 3.5%.

clock            | before     | after      | diff
==================================================
monotonic          17326692     17951770     3.6%
monotonic-coarse   43624027     44215292     1.3%
monotonic-raw      17541809     17554932     0.1%
boottime           17334982     17954361     3.5%

[ tglx: Avoid the goto ]

Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-3-dima@arista.com

lib/vdso: Add unlikely() hint into vdso_read_begin()

Place the branch with no concurrent write before the contended case.

Performance numbers for Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz
(more clock_gettime() cycles - the better):
        | before    | after
-----------------------------------
        | 150252214 | 153242367
        | 150301112 | 153324800
        | 150392773 | 153125401
        | 150373957 | 153399355
        | 150303157 | 153489417
        | 150365237 | 153494270
-----------------------------------
avg     | 150331408 | 153345935
diff %  | 2     | 0
-----------------------------------
stdev % | 0.3     | 0.1

Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20191112012724.250792-2-dima@arista.com

lib/vdso: Avoid duplication in __cvdso_clock_getres()

VDSO_HRES and VDSO_RAW clocks are handled the same way.

Avoid the code duplication.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/fdf1a968a8f7edd61456f1689ac44082ebb19c15.1577111367.git.christophe.leroy@c-s.fr

lib/vdso: Let do_coarse() return 0 to simplify the callsite

do_coarse() is similar to do_hres() except that it never fails.

Change its type to int instead of void and let it always return success (0)
to simplify the call site.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/21e8afa38c02ca8672c2690307383507fe63b454.1577111367.git.christophe.leroy@c-s.fr

x86/vdso: Remove unused VDSO_HAS_32BIT_FALLBACK

VDSO_HAS_32BIT_FALLBACK has been removed from the core since
the architectures that support the generic vDSO library have
been converted to support the 32 bit fallbacks.

Remove unused VDSO_HAS_32BIT_FALLBACK from x86 vdso.

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20190830135902.20861-9-vincenzo.frascino@arm.com

mips: vdso: Remove unused VDSO_HAS_32BIT_FALLBACK

VDSO_HAS_32BIT_FALLBACK has been removed from the core since
the architectures that support the generic vDSO library have
been converted to support the 32 bit fallbacks.

Remove unused VDSO_HAS_32BIT_FALLBACK from mips vdso.

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Link: https://lore.kernel.org/r/20190830135902.20861-8-vincenzo.frascino@arm.com

arm64: compat: vdso: Remove unused VDSO_HAS_32BIT_FALLBACK

VDSO_HAS_32BIT_FALLBACK has been removed from the core since
the architectures that support the generic vDSO library have
been converted to support the 32 bit fallbacks.

Remove unused VDSO_HAS_32BIT_FALLBACK from arm64 compat vdso.

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20190830135902.20861-7-vincenzo.frascino@arm.com

lib/vdso: Remove checks on return value for 32 bit vDSO

Since all the architectures that support the generic vDSO library have
been converted to support the 32 bit fallbacks it is not required
anymore to check the return value of __cvdso_clock_get*time32_common()
before updating the old_timespec fields.

Remove the related checks from the generic vdso library.

References: c60a32ea4f45 ("lib/vdso/32: Provide legacy syscall fallbacks")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20190830135902.20861-6-vincenzo.frascino@arm.com

lib/vdso: Remove VDSO_HAS_32BIT_FALLBACK

VDSO_HAS_32BIT_FALLBACK was introduced to address a regression which
caused seccomp to deny access to the applications to clock_gettime64()
and clock_getres64() because they are not enabled in the existing
filters.

The purpose of VDSO_HAS_32BIT_FALLBACK was to simplify the conditional
implementation of __cvdso_clock_get*time32() variants.

Now that all the architectures that support the generic vDSO library
have been converted to support the 32 bit fallbacks the conditional
can be removed.

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20190830135902.20861-5-vincenzo.frascino@arm.com
References: c60a32ea4f45 ("lib/vdso/32: Provide legacy syscall fallbacks")

lib/vdso: Build 32 bit specific functions in the right context

clock_gettime32 and clock_getres_time32 should be compiled only with a
32 bit vdso library.

Exclude these symbols when BUILD_VDSO32 is not defined.

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lore.kernel.org/r/20190830135902.20861-3-vincenzo.frascino@arm.com

ARM: vdso: Set BUILD_VDSO32 and provide 32bit fallbacks

Setting BUILD_VDSO32 is required to expose the legacy 32bit interfaces in
the generic VDSO code which are going to be hidden behind an #ifdef
BUILD_VDSO32.

The 32bit fallbacks are necessary to remove the existing
VDSO_HAS_32BIT_FALLBACK hackery.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/87tv4zq9dc.fsf@nanos.tec.linutronix.de

arm64: compat: vdso: Expose BUILD_VDSO32

clock_gettime32 and clock_getres_time32 should be compiled only with the
32 bit vdso library.

Expose BUILD_VDSO32 when arm64 compat is compiled, to provide an
indication to the generic library to include these symbols.

Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20190830135902.20861-2-vincenzo.frascino@arm.com

Merge branch 'timers/urgent' into timers/core

Pick up upstream VDSO fix before adding more VDSO changes.

lib/vdso: Make __cvdso_clock_getres() static

Fix the following sparse warning in the generic vDSO library:

linux/lib/vdso/gettimeofday.c:224:5: warning: symbol
'__cvdso_clock_getres' was not declared. Should it be static?

Make it static and also mark it __maybe_unsed.

Fixes: 502a590a170b ("lib/vdso: Move fallback invocation to the callers")
Reported-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191128111719.8282-1-vincenzo.frascino@arm.com

time/sched_clock: Disable interrupts in sched_clock_register()

Instead of issueing a warning if sched_clock_register() is called from a
context where IRQs are enabled, the code now ensures that IRQs are indeed
disabled.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200107010630.954648-1-paul@crapouillou.net

time/posix-stubs: Provide compat itimer supoprt for alpha

Using compat_sys_getitimer and compat_sys_setitimer on alpha
causes a link failure in the Alpha tinyconfig and other configurations
that turn off CONFIG_POSIX_TIMERS.

Use the same #ifdef check for the stub version as well.

Fixes: 4c22ea2b9120 ("y2038: use compat_{get,set}_itimer on alpha")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191207191043.656328-1-arnd@arndb.de

Linux 5.5-rc5

Merge tag 'riscv/for-v5.5-rc5' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Paul Walmsley:
"Several fixes for RISC-V:

   - Fix function graph trace support

   - Prefix the CSR IRQ_* macro names with "RV_", to avoid collisions
     with macros elsewhere in the Linux kernel tree named "IRQ_TIMER"

   - Use __pa_symbol() when computing the physical address of a kernel
     symbol, rather than __pa()

   - Mark the RISC-V port as supporting GCOV

  One DT addition:

   - Describe the L2 cache controller in the FU540 DT file

  One documentation update:

   - Add patch acceptance guideline documentation"

* tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  Documentation: riscv: add patch acceptance guidelines
  riscv: prefix IRQ_ macro names with an RV_ namespace
  clocksource: riscv: add notrace to riscv_sched_clock
  riscv: ftrace: correct the condition logic in function graph tracer
  riscv: dts: Add DT support for SiFive L2 cache controller
  riscv: gcov: enable gcov for RISC-V
  riscv: mm: use __pa_symbol for kernel symbols

Documentation: riscv: add patch acceptance guidelines

Formalize, in kernel documentation, the patch acceptance policy for
arch/riscv.  In summary, it states that as maintainers, we plan to
only accept patches for new modules or extensions that have been
frozen or ratified by the RISC-V Foundation.

We've been following these guidelines for the past few months.  In the
meantime, we've received quite a bit of feedback that it would be
helpful to have these guidelines formally documented.

Based on a suggestion from Matthew Wilcox, we also add a link to this
file to Documentation/process/index.rst, to make this document easier
to find.  The format of this document has also been changed to align
to the format outlined in the maintainer entry profiles, in accordance
with comments from Jon Corbet and Dan Williams.

Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Krste Asanovic <krste@berkeley.edu>
Cc: Andrew Waterman <waterman@eecs.berkeley.edu>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>

riscv: prefix IRQ_ macro names with an RV_ namespace

"IRQ_TIMER", used in the arch/riscv CSR header file, is a sufficiently
generic macro name that it's used by several source files across the
Linux code base. Some of these other files ultimately include the
arch/riscv CSR include file, causing collisions. Fix by prefixing the
RISC-V csr.h IRQ_ macro names with an RV_ prefix.

Fixes: a4c3733d32a72 ("riscv: abstract out CSR names for supervisor vs machine mode")
Reported-by: Olof Johansson <olof@lixom.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

clocksource: riscv: add notrace to riscv_sched_clock

When enabling ftrace graph tracer, it gets the tracing clock in
ftrace_push_return_trace().  Eventually, it invokes riscv_sched_clock()
to get the clock value.  If riscv_sched_clock() isn't marked with
'notrace', it will call ftrace_push_return_trace() and cause infinite
loop.

The result of failure as follow:

command: echo function_graph >current_tracer
[   46.176787] Unable to handle kernel paging request at virtual address ffffffe04fb38c48
[   46.177309] Oops [#1]
[   46.177478] Modules linked in:
[   46.177770] CPU: 0 PID: 256 Comm: $d Not tainted 5.5.0-rc1 #47
[   46.177981] epc: ffffffe00035e59a ra : ffffffe00035e57e sp : ffffffe03a7569b0
[   46.178216]  gp : ffffffe000d29b90 tp : ffffffe03a756180 t0 : ffffffe03a756968
[   46.178430]  t1 : ffffffe00087f408 t2 : ffffffe03a7569a0 s0 : ffffffe03a7569f0
[   46.178643]  s1 : ffffffe00087f408 a0 : 0000000ac054cda4 a1 : 000000000087f411
[   46.178856]  a2 : 0000000ac054cda4 a3 : 0000000000373ca0 a4 : ffffffe04fb38c48
[   46.179099]  a5 : 00000000153e22a8 a6 : 00000000005522ff a7 : 0000000000000005
[   46.179338]  s2 : ffffffe03a756a90 s3 : ffffffe00032811c s4 : ffffffe03a756a58
[   46.179570]  s5 : ffffffe000d29fe0 s6 : 0000000000000001 s7 : 0000000000000003
[   46.179809]  s8 : 0000000000000003 s9 : 0000000000000002 s10: 0000000000000004
[   46.180053]  s11: 0000000000000000 t3 : 0000003fc815749c t4 : 00000000000efc90
[   46.180293]  t5 : ffffffe000d29658 t6 : 0000000000040000
[   46.180482] status: 0000000000000100 badaddr: ffffffe04fb38c48 cause: 000000000000000f

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[paul.walmsley@sifive.com: cleaned up patch description]
Fixes: 92e0d143fdef ("clocksource/drivers/riscv_timer: Provide the sched_clock")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"17 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  hexagon: define ioremap_uc
  ocfs2: fix the crash due to call ocfs2_get_dlm_debug once less
  ocfs2: call journal flush to mark journal as empty after journal recovery when mount
  mm/hugetlb: defer freeing of huge pages if in non-task context
  mm/gup: fix memory leak in __gup_benchmark_ioctl
  mm/oom: fix pgtables units mismatch in Killed process message
  fs/posix_acl.c: fix kernel-doc warnings
  hexagon: work around compiler crash
  hexagon: parenthesize registers in asm predicates
  fs/namespace.c: make to_mnt_ns() static
  fs/nsfs.c: include headers for missing declarations
  fs/direct-io.c: include fs/internal.h for missing prototype
  mm: move_pages: return valid node id in status if the page is already on the target node
  memcg: account security cred as well to kmemcg
  kcov: fix struct layout for kcov_remote_arg
  mm/zsmalloc.c: fix the migrated zspage statistics.
  mm/memory_hotplug: shrink zones when offlining memory

Merge tag 'apparmor-pr-2020-01-04' of git://git./linux/kernel/git/jj/linux-apparmor

Pull apparmor fixes from John Johansen:

- performance regression: only get a label reference if the fast path
   check fails

- fix aa_xattrs_match() may sleep while holding a RCU lock

- fix bind mounts aborting with -ENOMEM

* tag 'apparmor-pr-2020-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock
  apparmor: only get a label reference if the fast path check fails
  apparmor: fix bind mounts aborting with -ENOMEM

apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock

aa_xattrs_match() is unfortunately calling vfs_getxattr_alloc() from a
context protected by an rcu_read_lock. This can not be done as
vfs_getxattr_alloc() may sleep regardles of the gfp_t value being
passed to it.

Fix this by breaking the rcu_read_lock on the policy search when the
xattr match feature is requested and restarting the search if a policy
changes occur.

Fixes: 8e51f9087f40 ("apparmor: Add support for attaching profiles via xattr, presence and value")
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: John Johansen <john.johansen@canonical.com>

Merge tag 'mips_fixes_5.5_1' of git://git./linux/kernel/git/mips/linux

Pull MIPS fixes from Paul Burton:
"A collection of MIPS fixes:

   - Fill the struct cacheinfo shared_cpu_map field with sensible
     values, notably avoiding issues with perf which was unhappy in the
     absence of these values.

   - A boot fix for Loongson 2E & 2F machines which was fallout from
     some refactoring performed this cycle.

   - A Kconfig dependency fix for the Loongson CPU HWMon driver.

   - A couple of VDSO fixes, ensuring gettimeofday() behaves
     appropriately for kernel configurations that don't include support
     for a clocksource the VDSO can use & fixing the calling convention
     for the n32 & n64 VDSOs which would previously clobber the $gp/$28
     register.

   - A build fix for vmlinuz compressed images which were
     inappropriately building with -fsanitize-coverage despite not being
     part of the kernel proper, then failing to link due to the missing
     __sanitizer_cov_trace_pc() function.

   - A couple of eBPF JIT fixes, including disabling it for MIPS32 due
     to a large number of issues with the code generated there &
     reflecting ISA dependencies in Kconfig to enforce that systems
     which don't support the JIT must include the interpreter"

* tag 'mips_fixes_5.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Avoid VDSO ABI breakage due to global register variable
  MIPS: BPF: eBPF JIT: check for MIPS ISA compliance in Kconfig
  MIPS: BPF: Disable MIPS32 eBPF JIT
  MIPS: Prevent link failure with kcov instrumentation
  MIPS: Kconfig: Use correct form for 'depends on'
  mips: Fix gettimeofday() in the vdso library
  MIPS: Fix boot on Fuloong2 systems
  mips: cacheinfo: report shared CPU map

hexagon: define ioremap_uc

Similar to commit 38e45d81d14e ("sparc64: implement ioremap_uc") define
ioremap_uc for hexagon to avoid errors from
-Wimplicit-function-definition.

Link: http://lkml.kernel.org/r/20191209222956.239798-2-ndesaulniers@google.com
Link: https://github.com/ClangBuiltLinux/linux/issues/797
Fixes: e537654b7039 ("lib: devres: add a helper function for ioremap_uc")
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Tuowen Zhao <ztuowen@gmail.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Will Deacon <will@kernel.org>
Cc: Richard Fontana <rfontana@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: fix the crash due to call ocfs2_get_dlm_debug once less

Because ocfs2_get_dlm_debug() function is called once less here, ocfs2
file system will trigger the system crash, usually after ocfs2 file
system is unmounted.

This system crash is caused by a generic memory corruption, these crash
backtraces are not always the same, for exapmle,

    ocfs2: Unmounting device (253,16) on (node 172167785)
    general protection fault: 0000 [#1] SMP PTI
    CPU: 3 PID: 14107 Comm: fence_legacy Kdump:
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
    RIP: 0010:__kmalloc+0xa5/0x2a0
    Code: 00 00 4d 8b 07 65 4d 8b
    RSP: 0018:ffffaa1fc094bbe8 EFLAGS: 00010286
    RAX: 0000000000000000 RBX: d310a8800d7a3faf RCX: 0000000000000000
    RDX: 0000000000000000 RSI: 0000000000000dc0 RDI: ffff96e68fc036c0
    RBP: d310a8800d7a3faf R08: ffff96e6ffdb10a0 R09: 00000000752e7079
    R10: 000000000001c513 R11: 0000000004091041 R12: 0000000000000dc0
    R13: 0000000000000039 R14: ffff96e68fc036c0 R15: ffff96e68fc036c0
    FS:  00007f699dfba540(0000) GS:ffff96e6ffd80000(0000) knlGS:00000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 000055f3a9d9b768 CR3: 000000002cd1c000 CR4: 00000000000006e0
    Call Trace:
     ext4_htree_store_dirent+0x35/0x100 [ext4]
     htree_dirblock_to_tree+0xea/0x290 [ext4]
     ext4_htree_fill_tree+0x1c1/0x2d0 [ext4]
     ext4_readdir+0x67c/0x9d0 [ext4]
     iterate_dir+0x8d/0x1a0
     __x64_sys_getdents+0xab/0x130
     do_syscall_64+0x60/0x1f0
     entry_SYSCALL_64_after_hwframe+0x49/0xbe
    RIP: 0033:0x7f699d33a9fb

This regression problem was introduced by commit e581595ea29c ("ocfs: no
need to check return value of debugfs_create functions").

Link: http://lkml.kernel.org/r/20191225061501.13587-1-ghe@suse.com
Fixes: e581595ea29c ("ocfs: no need to check return value of debugfs_create functions")
Signed-off-by: Gang He <ghe@suse.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org> [5.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: call journal flush to mark journal as empty after journal recovery when mount

If journal is dirty when mount, it will be replayed but jbd2 sb log tail
cannot be updated to mark a new start because journal->j_flag has
already been set with JBD2_ABORT first in journal_init_common.

When a new transaction is committed, it will be recored in block 1
first(journal->j_tail is set to 1 in journal_reset).  If emergency
restart happens again before journal super block is updated
unfortunately, the new recorded trans will not be replayed in the next
mount.

The following steps describe this procedure in detail.
1. mount and touch some files
2. these transactions are committed to journal area but not checkpointed
3. emergency restart
4. mount again and its journals are replayed
5. journal super block's first s_start is 1, but its s_seq is not updated
6. touch a new file and its trans is committed but not checkpointed
7. emergency restart again
8. mount and journal is dirty, but trans committed in 6 will not be
replayed.

This exception happens easily when this lun is used by only one node.
If it is used by multi-nodes, other node will replay its journal and its
journal super block will be updated after recovery like what this patch
does.

ocfs2_recover_node->ocfs2_replay_journal.

The following jbd2 journal can be generated by touching a new file after
journal is replayed, and seq 15 is the first valid commit, but first seq
is 13 in journal super block.

logdump:
  Block 0: Journal Superblock
  Seq: 0   Type: 4 (JBD2_SUPERBLOCK_V2)
  Blocksize: 4096   Total Blocks: 32768   First Block: 1
  First Commit ID: 13   Start Log Blknum: 1
  Error: 0
  Feature Compat: 0
  Feature Incompat: 2 block64
  Feature RO compat: 0
  Journal UUID: 4ED3822C54294467A4F8E87D2BA4BC36
  FS Share Cnt: 1   Dynamic Superblk Blknum: 0
  Per Txn Block Limit    Journal: 0    Data: 0

  Block 1: Journal Commit Block
  Seq: 14   Type: 2 (JBD2_COMMIT_BLOCK)

  Block 2: Journal Descriptor
  Seq: 15   Type: 1 (JBD2_DESCRIPTOR_BLOCK)
  No. Blocknum        Flags
   0. 587             none
  UUID: 00000000000000000000000000000000
   1. 8257792         JBD2_FLAG_SAME_UUID
   2. 619             JBD2_FLAG_SAME_UUID
   3. 24772864        JBD2_FLAG_SAME_UUID
   4. 8257802         JBD2_FLAG_SAME_UUID
   5. 513             JBD2_FLAG_SAME_UUID JBD2_FLAG_LAST_TAG
  ...
  Block 7: Inode
  Inode: 8257802   Mode: 0640   Generation: 57157641 (0x3682809)
  FS Generation: 2839773110 (0xa9437fb6)
  CRC32: 00000000   ECC: 0000
  Type: Regular   Attr: 0x0   Flags: Valid
  Dynamic Features: (0x1) InlineData
  User: 0 (root)   Group: 0 (root)   Size: 7
  Links: 1   Clusters: 0
  ctime: 0x5de5d870 0x11104c61 -- Tue Dec  3 11:37:20.286280801 2019
  atime: 0x5de5d870 0x113181a1 -- Tue Dec  3 11:37:20.288457121 2019
  mtime: 0x5de5d870 0x11104c61 -- Tue Dec  3 11:37:20.286280801 2019
  dtime: 0x0 -- Thu Jan  1 08:00:00 1970
  ...
  Block 9: Journal Commit Block
  Seq: 15   Type: 2 (JBD2_COMMIT_BLOCK)

The following is journal recovery log when recovering the upper jbd2
journal when mount again.

syslog:
  ocfs2: File system on device (252,1) was not unmounted cleanly, recovering it.
  fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 0
  fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 1
  fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 2
  fs/jbd2/recovery.c:(jbd2_journal_recover, 278): JBD2: recovery, exit status 0, recovered transactions 13 to 13

Due to first commit seq 13 recorded in journal super is not consistent
with the value recorded in block 1(seq is 14), journal recovery will be
terminated before seq 15 even though it is an unbroken commit, inode
8257802 is a new file and it will be lost.

Link: http://lkml.kernel.org/r/20191217020140.2197-1-li.kai4@h3c.com
Signed-off-by: Kai Li <li.kai4@h3c.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Changwei Ge <gechangwei@live.cn>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: defer freeing of huge pages if in non-task context

The following lockdep splat was observed when a certain hugetlbfs test
was run:

  ================================
  WARNING: inconsistent lock state
  4.18.0-159.el8.x86_64+debug #1 Tainted: G        W --------- -  -
  --------------------------------
  inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
  swapper/30/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
  ffffffff9acdc038 (hugetlb_lock){+.?.}, at: free_huge_page+0x36f/0xaa0
  {SOFTIRQ-ON-W} state was registered at:
    lock_acquire+0x14f/0x3b0
    _raw_spin_lock+0x30/0x70
    __nr_hugepages_store_common+0x11b/0xb30
    hugetlb_sysctl_handler_common+0x209/0x2d0
    proc_sys_call_handler+0x37f/0x450
    vfs_write+0x157/0x460
    ksys_write+0xb8/0x170
    do_syscall_64+0xa5/0x4d0
    entry_SYSCALL_64_after_hwframe+0x6a/0xdf
  irq event stamp: 691296
  hardirqs last  enabled at (691296): [<ffffffff99bb034b>] _raw_spin_unlock_irqrestore+0x4b/0x60
  hardirqs last disabled at (691295): [<ffffffff99bb0ad2>] _raw_spin_lock_irqsave+0x22/0x81
  softirqs last  enabled at (691284): [<ffffffff97ff0c63>] irq_enter+0xc3/0xe0
  softirqs last disabled at (691285): [<ffffffff97ff0ebe>] irq_exit+0x23e/0x2b0

  other info that might help us debug this:
   Possible unsafe locking scenario:

         CPU0
         ----
    lock(hugetlb_lock);
    <Interrupt>
      lock(hugetlb_lock);

   *** DEADLOCK ***
      :
  Call Trace:
   <IRQ>
   __lock_acquire+0x146b/0x48c0
   lock_acquire+0x14f/0x3b0
   _raw_spin_lock+0x30/0x70
   free_huge_page+0x36f/0xaa0
   bio_check_pages_dirty+0x2fc/0x5c0
   clone_endio+0x17f/0x670 [dm_mod]
   blk_update_request+0x276/0xe50
   scsi_end_request+0x7b/0x6a0
   scsi_io_completion+0x1c6/0x1570
   blk_done_softirq+0x22e/0x350
   __do_softirq+0x23d/0xad8
   irq_exit+0x23e/0x2b0
   do_IRQ+0x11a/0x200
   common_interrupt+0xf/0xf
   </IRQ>

Both the hugetbl_lock and the subpool lock can be acquired in
free_huge_page().  One way to solve the problem is to make both locks
irq-safe.  However, Mike Kravetz had learned that the hugetlb_lock is
held for a linear scan of ALL hugetlb pages during a cgroup reparentling
operation.  So it is just too long to have irq disabled unless we can
break hugetbl_lock down into finer-grained locks with shorter lock hold
times.

Another alternative is to defer the freeing to a workqueue job.  This
patch implements the deferred freeing by adding a free_hpage_workfn()
work function to do the actual freeing.  The free_huge_page() call in a
non-task context saves the page to be freed in the hpage_freelist linked
list in a lockless manner using the llist APIs.

The generic workqueue is used to process the work, but a dedicated
workqueue can be used instead if it is desirable to have the huge page
freed ASAP.

Thanks to Kirill Tkhai <ktkhai@virtuozzo.com> for suggesting the use of
llist APIs which simplfy the code.

Link: http://lkml.kernel.org/r/20191217170331.30893-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/gup: fix memory leak in __gup_benchmark_ioctl

In the implementation of __gup_benchmark_ioctl() the allocated pages
should be released before returning in case of an invalid cmd. Release
pages via kvfree().

[akpm@linux-foundation.org: rework code flow, return -EINVAL rather than -1]
Link: http://lkml.kernel.org/r/20191211174653.4102-1-navid.emamdoost@gmail.com
Fixes: 714a3a1ebafe ("mm/gup_benchmark.c: add additional pinning methods")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/oom: fix pgtables units mismatch in Killed process message

pr_err() expects kB, but mm_pgtables_bytes() returns the number of bytes.
As everything else is printed in kB, I chose to fix the value rather than
the string.

Before:

[  pid  ]   uid  tgid total_vm      rss pgtables_bytes swapents oom_score_adj name
...
[   1878]  1000  1878   217253   151144  1269760        0             0 python
...
Out of memory: Killed process 1878 (python) total-vm:869012kB, anon-rss:604572kB, file-rss:4kB, shmem-rss:0kB, UID:1000 pgtables:1269760kB oom_score_adj:0

After:

[  pid  ]   uid  tgid total_vm      rss pgtables_bytes swapents oom_score_adj name
...
[   1436]  1000  1436   217253   151890  1294336        0             0 python
...
Out of memory: Killed process 1436 (python) total-vm:869012kB, anon-rss:607516kB, file-rss:44kB, shmem-rss:0kB, UID:1000 pgtables:1264kB oom_score_adj:0

Link: http://lkml.kernel.org/r/20191211202830.1600-1-idryomov@gmail.com
Fixes: 70cb6d267790 ("mm/oom: add oom_score_adj and pgtables to Killed process message")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Edward Chron <echron@arista.com>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/posix_acl.c: fix kernel-doc warnings

Fix kernel-doc warnings in fs/posix_acl.c.
Also fix one typo (setgit -> setgid).

  fs/posix_acl.c:647: warning: Function parameter or member 'inode' not described in 'posix_acl_update_mode'
  fs/posix_acl.c:647: warning: Function parameter or member 'mode_p' not described in 'posix_acl_update_mode'
  fs/posix_acl.c:647: warning: Function parameter or member 'acl' not described in 'posix_acl_update_mode'

Link: http://lkml.kernel.org/r/29b0dc46-1f28-a4e5-b1d0-ba2b65629779@infradead.org
Fixes: 073931017b49d ("posix_acl: Clear SGID bit when setting file permissions")

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hexagon: work around compiler crash

Clang cannot translate the string "r30" into a valid register yet.

Link: https://github.com/ClangBuiltLinux/linux/issues/755
Link: http://lkml.kernel.org/r/20191028155722.23419-1-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Sid Manning <sidneym@quicinc.com>
Reviewed-by: Brian Cain <bcain@codeaurora.org>
Cc: Allison Randal <allison@lohutok.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Richard Fontana <rfontana@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hexagon: parenthesize registers in asm predicates

Hexagon requires that register predicates in assembly be parenthesized.

Link: https://github.com/ClangBuiltLinux/linux/issues/754
Link: http://lkml.kernel.org/r/20191209222956.239798-3-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Sid Manning <sidneym@codeaurora.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Tuowen Zhao <ztuowen@gmail.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Will Deacon <will@kernel.org>
Cc: Richard Fontana <rfontana@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/namespace.c: make to_mnt_ns() static

Make to_mnt_ns() static to address the following 'sparse' warning:

fs/namespace.c:1731:22: warning: symbol 'to_mnt_ns' was not declared. Should it be static?

Link: http://lkml.kernel.org/r/20191209234830.156260-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/nsfs.c: include headers for missing declarations

Include linux/proc_fs.h and fs/internal.h to address the following
'sparse' warnings:

fs/nsfs.c:41:32: warning: symbol 'ns_dentry_operations' was not declared. Should it be static?
fs/nsfs.c:145:5: warning: symbol 'open_related_ns' was not declared. Should it be static?

Link: http://lkml.kernel.org/r/20191209234822.156179-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/direct-io.c: include fs/internal.h for missing prototype

Include fs/internal.h to address the following 'sparse' warning:

fs/direct-io.c:591:5: warning: symbol 'sb_init_dio_done_wq' was not declared. Should it be static?

Link: http://lkml.kernel.org/r/20191209234544.128302-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: move_pages: return valid node id in status if the page is already on the target node

Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:

  int main(void)
  {
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;

unsigned long nodemask =  1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);

void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}

ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);

int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}

ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
  }

Then running the program would return nonsense status values:

  $ ./move_pages_bug
  move_pages: 0
  status[0] = 208
  status[1] = 208
  status[2] = 208
  status[3] = 208
  status[4] = 208
  status[5] = 208
  status[6] = 208
  status[7] = 208

This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds.  The valid status may be errno or node id.

We can't simply initialize status array to zero since the pages may be
not on node 0.  Fix it by updating status with node id which the page is
already on.

Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: account security cred as well to kmemcg

The cred_jar kmem_cache is already memcg accounted in the current kernel
but cred->security is not.  Account cred->security to kmemcg.

Recently we saw high root slab usage on our production and on further
inspection, we found a buggy application leaking processes.  Though that
buggy application was contained within its memcg but we observe much
more system memory overhead, couple of GiBs, during that period.  This
overhead can adversely impact the isolation on the system.

One source of high overhead we found was cred->security objects, which
have a lifetime of at least the life of the process which allocated
them.

Link: http://lkml.kernel.org/r/20191205223721.40034-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kcov: fix struct layout for kcov_remote_arg

Make the layout of kcov_remote_arg the same for 32-bit and 64-bit code.
This makes it more convenient to write userspace apps that can be
compiled into 32-bit or 64-bit binaries and still work with the same
64-bit kernel.

Also use proper __u32 types in uapi headers instead of unsigned ints.

Link: http://lkml.kernel.org/r/9e91020876029cfefc9211ff747685eba9536426.1575638983.git.andreyknvl@google.com
Fixes: eec028c9386ed1a ("kcov: remote coverage support")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: "Jacky . Cao @ sony . com" <Jacky.Cao@sony.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zsmalloc.c: fix the migrated zspage statistics.

When zspage is migrated to the other zone, the zone page state should be
updated as well, otherwise the NR_ZSPAGE for each zone shows wrong
counts including proc/zoneinfo in practice.

Link: http://lkml.kernel.org/r/1575434841-48009-1-git-send-email-chanho.min@lge.com
Fixes: 91537fee0013 ("mm: add NR_ZSMALLOC to vmstat")
Signed-off-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Jinsuk Choi <jjinsuk.choi@lge.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug: shrink zones when offlining memory

We currently try to shrink a single zone when removing memory.  We use
the zone of the first page of the memory we are removing.  If that
memmap was never initialized (e.g., memory was never onlined), we will
read garbage and can trigger kernel BUGs (due to a stale pointer):

    BUG: unable to handle page fault for address: 000000000000353d
    #PF: supervisor write access in kernel mode
    #PF: error_code(0x0002) - not-present page
    PGD 0 P4D 0
    Oops: 0002 [#1] SMP PTI
    CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ #317
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4
    Workqueue: kacpi_hotplug acpi_hotplug_work_fn
    RIP: 0010:clear_zone_contiguous+0x5/0x10
    Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840
    RSP: 0018:ffffad2400043c98 EFLAGS: 00010246
    RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000
    RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40
    RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001
    R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000
    R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680
    FS:  0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
     __remove_pages+0x4b/0x640
     arch_remove_memory+0x63/0x8d
     try_remove_memory+0xdb/0x130
     __remove_memory+0xa/0x11
     acpi_memory_device_remove+0x70/0x100
     acpi_bus_trim+0x55/0x90
     acpi_device_hotplug+0x227/0x3a0
     acpi_hotplug_work_fn+0x1a/0x30
     process_one_work+0x221/0x550
     worker_thread+0x50/0x3b0
     kthread+0x105/0x140
     ret_from_fork+0x3a/0x50
    Modules linked in:
    CR2: 000000000000353d

Instead, shrink the zones when offlining memory or when onlining failed.
Introduce and use remove_pfn_range_from_zone(() for that.  We now
properly shrink the zones, even if we have DIMMs whereby

- Some memory blocks fall into no zone (never onlined)

- Some memory blocks fall into multiple zones (offlined+re-onlined)

- Multiple memory blocks that fall into different zones

Drop the zone parameter (with a potential dubious value) from
__remove_pages() and __remove_section().

Link: http://lkml.kernel.org/r/20191006085646.5768-6-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: <stable@vger.kernel.org> [5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'dmaengine-fix-5.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fixes from Vinod Koul:
"A bunch of fixes for:

   - uninitialized dma_slave_caps access

   - virt-dma use after free in vchan_complete()

   - driver fixes for ioat, k3dma and jz4780"

* tag 'dmaengine-fix-5.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
  ioat: ioat_alloc_ring() failure handling.
  dmaengine: virt-dma: Fix access after free in vchan_complete()
  dmaengine: k3dma: Avoid null pointer traversal
  dmaengine: dma-jz4780: Also break descriptor chains on JZ4725B
  dmaengine: Fix access to uninitialized dma_slave_caps

Merge tag 'media/v5.5-3' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

- some fixes at CEC core to comply with HDMI 2.0 specs and fix some
   border cases

- a fix at the transmission logic of the pulse8-cec driver

- one alignment fix on a data struct at ipu3 when built with 32 bits

* tag 'media/v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: intel-ipu3: Align struct ipu3_uapi_awb_fr_config_s to 32 bytes
  media: pulse8-cec: fix lost cec_transmit_attempt_done() call
  media: cec: check 'transmit_in_progress', not 'transmitting'
  media: cec: avoid decrementing transmit_queue_sz if it is 0
  media: cec: CEC 2.0-only bcast messages were ignored

Merge tag 'for-5.5-rc4-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"A few fixes for btrfs:

   - blkcg accounting problem with compression that could stall writes

   - setting up blkcg bio for compression crashes due to NULL bdev
     pointer

   - fix possible infinite loop in writeback for nocow files (here
     possible means almost impossible, 13 things that need to happen to
     trigger it)"

* tag 'for-5.5-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix infinite loop during nocow writeback due to race
  btrfs: fix compressed write bio blkcg attribution
  btrfs: punt all bios created in btrfs_submit_compressed_write()

Merge tag 'block-5.5-20200103' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"Three fixes in here:

   - Fix for a missing split on default memory boundary mask (4G) (Ming)

   - Fix for multi-page read bio truncate (Ming)

   - Fix for null_blk zone close request handling (Damien)"

* tag 'block-5.5-20200103' of git://git.kernel.dk/linux-block:
  null_blk: Fix REQ_OP_ZONE_CLOSE handling
  block: fix splitting segments on boundary masks
  block: add bio_truncate to fix guard_bio_eod

Merge tag 'kbuild-fixes-v5.5-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

- fix build error in usr/gen_initramfs_list.sh

- fix libelf-dev dependency in deb-pkg build

* tag 'kbuild-fixes-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild/deb-pkg: annotate libelf-dev dependency as :native
gen_initramfs_list.sh: fix 'bad variable name' error

Merge tag 'for-linus-2020-01-03' of git://git./linux/kernel/git/brauner/linux

Pull thread fixes from Christian Brauner:
"Here are two fixes:

   - Panic earlier when global init exits to generate useable coredumps.

     Currently, when global init and all threads in its thread-group
     have exited we panic via:

       do_exit()
       -> exit_notify()
          -> forget_original_parent()
             -> find_child_reaper()

     This makes it hard to extract a useable coredump for global init
     from a kernel crashdump because by the time we panic exit_mm() will
     have already released global init's mm. We now panic slightly
     earlier. This has been a problem in certain environments such as
     Android.

   - Fix a race in assigning and reading taskstats for thread-groups
     with more than one thread.

     This patch has been waiting for quite a while since people
     disagreed on what the correct fix was at first"

* tag 'for-linus-2020-01-03' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  exit: panic before exit_mm() on global init exit
  taskstats: fix data-race

Merge tag 'powerpc-5.5-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
"Two more powerpc fixes for 5.5:

   - One commit to fix a build error when CONFIG_JUMP_LABEL=n,
     introduced by our recent fix to is_shared_processor().

   - A commit marking some SLB related functions as notrace, as tracing
     them triggers warnings.

  Thanks to Jason A Donenfeld"

* tag 'powerpc-5.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/spinlocks: Include correct header for static key
  powerpc/mm: Mark get_slice_psize() & slice_addr_is_low() as notrace

Merge tag 'sound-5.5-rc5' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"Nothing to worry at this stage but all nice small changes:

   - A regression fix for AMD GPU detection in HD-audio

   - A long-standing sleep-in-atomic fix for an ice1724 device

   - Usual suspects, the device-specific quirks for HD- and USB-audio"

* tag 'sound-5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Enable the bass speaker of ASUS UX431FLC
  ALSA: ice1724: Fix sleep-in-atomic in Infrasonic Quartet support code
  ALSA: hda/realtek - Add Bass Speaker and fixed dac for bass speaker
  ALSA: hda - Apply sync-write workaround to old Intel platforms, too
  ALSA: hda/hdmi - fix atpx_present when CLASS is not VGA
  ALSA: usb-audio: fix set_format altsetting sanity check
  ALSA: hda/realtek - Add headset Mic no shutup for ALC283
  ALSA: usb-audio: set the interface format after resume on Dell WD19

Merge tag 'drm-fixes-2020-01-03' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"New Years fixes! Mostly amdgpu with a light smattering of arm
  graphics, and two AGP warning fixes.

  Quiet as expected, hopefully we don't get a post holiday rush.

  agp:
   - two unused variable removed

  amdgpu:
   - ATPX regression fix
   - SMU metrics table locking fixes
   - gfxoff fix for raven
   - RLC firmware loading stability fix

  mediatek:
   - external display fix
   - dsi timing fix

  sun4i:
   - Fix double-free in connector/encoder cleanup (Stefan)

  maildp:
   - Make vtable static (Ben)"

* tag 'drm-fixes-2020-01-03' of git://anongit.freedesktop.org/drm/drm:
  agp: remove unused variable arqsz in agp_3_5_enable()
  agp: remove unused variable mcapndx
  drm/amdgpu: correct RLC firmwares loading sequence
  drm/amdgpu: enable gfxoff for raven1 refresh
  drm/amdgpu/smu: add metrics table lock for vega20 (v2)
  drm/amdgpu/smu: add metrics table lock for navi (v2)
  drm/amdgpu/smu: add metrics table lock for arcturus (v2)
  drm/amdgpu/smu: add metrics table lock
  Revert "drm/amdgpu: simplify ATPX detection"
  drm/arm/mali: make malidp_mw_connector_helper_funcs static
  drm/sun4i: hdmi: Remove duplicate cleanup calls
  drm/mediatek: reduce the hbp and hfp for phy timing
  drm/mediatek: Fix can't get component for external display plane.
  drm/mediatek: Check return value of mtk_drm_ddp_comp_for_plane.

mm/hugetlbfs: fix for_each_hstate() loop in init_hugetlbfs_fs()

LTP memfd_create04 started failing for some huge page sizes
after v5.4-10135-gc3bfc5dd73c6.

The problem is the check introduced to for_each_hstate() loop that
should skip default_hstate_idx. Since it doesn't update 'i' counter,
all subsequent huge page sizes are skipped as well.

Fixes: 8fc312b32b25 ("mm/hugetlbfs: fix error handling when setting up mounts")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kbuild/deb-pkg: annotate libelf-dev dependency as :native

Cross compiling the x86 kernel on a non-x86 build machine produces
the following error when CONFIG_UNWINDER_ORC is enabled, regardless
of whether libelf-dev is installed or not.

  dpkg-checkbuilddeps: error: Unmet build dependencies: libelf-dev
  dpkg-buildpackage: warning: build dependencies/conflicts unsatisfied; aborting
  dpkg-buildpackage: warning: (Use -d flag to override.)

Since this is a build time dependency for a build tool, we need to
depend on the native version of libelf-dev so add the appropriate
annotation.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

gen_initramfs_list.sh: fix 'bad variable name' error

Prior to commit 858805b336be ("kbuild: add $(BASH) to run scripts with
bash-extension"), this shell script was almost always run by bash since
bash is usually installed on the system by default.

Now, this script is run by sh, which might be a symlink to dash. On such
distributions, the following code emits an error:

  local dev=`LC_ALL=C ls -l "${location}"`

You can reproduce the build error, for example by setting
CONFIG_INITRAMFS_SOURCE="/dev".

    GEN     usr/initramfs_data.cpio.gz
  ./usr/gen_initramfs_list.sh: 131: local: 1: bad variable name
  make[1]: *** [usr/Makefile:61: usr/initramfs_data.cpio.gz] Error 2

This is because `LC_ALL=C ls -l "${location}"` contains spaces.
Surrounding it with double-quotes fixes the error.

Fixes: 858805b336be ("kbuild: add $(BASH) to run scripts with bash-extension")
Reported-by: Jory A. Pratt <anarchy@gentoo.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

media: intel-ipu3: Align struct ipu3_uapi_awb_fr_config_s to 32 bytes

A struct that needs to be aligned to 32 bytes has a size of 28. Increase
the size to 32.

This makes elements of arrays of this struct aligned to 32 as well, and
other structs where members are aligned to 32 mixing
ipu3_uapi_awb_fr_config_s as well as other types.

Fixes: commit dca5ef2aa1e6 ("media: staging/intel-ipu3: remove the unnecessary compiler flags")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

riscv: ftrace: correct the condition logic in function graph tracer

The condition should be logical NOT to assign the hook address to parent
address. Because the return value 0 of function_graph_enter upon
success.

Fixes: e949b6db51dc (riscv/function_graph: Simplify with function_graph_enter())
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

riscv: dts: Add DT support for SiFive L2 cache controller

Add the L2 cache controller DT node in SiFive FU540 soc-specific DT file

Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

riscv: gcov: enable gcov for RISC-V

This patch enables GCOV code coverage measurement on RISC-V.
Lightly tested on QEMU and Hifive Unleashed board, seems to work as
expected.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

riscv: mm: use __pa_symbol for kernel symbols

__pa_symbol is the marcro that should be used for kernel symbols. It is
also a pre-requisite for DEBUG_VIRTUAL which will do bounds checking.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

agp: remove unused variable arqsz in agp_3_5_enable()

This patch fix the following warning:
drivers/char/agp/isoch.c: In function ‘agp_3_5_enable’:
drivers/char/agp/isoch.c:322:13: warning: variable ‘arqsz’ set but not
used [-Wunused-but-set-variable]
u32 isoch, arqsz;
^~~~~

Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

agp: remove unused variable mcapndx

This patch fix the following warning:
drivers/char/agp/isoch.c: In function ‘agp_3_5_isochronous_node_enable’:
drivers/char/agp/isoch.c:87:5: warning: variable ‘mcapndx’ set but not
used [-Wunused-but-set-variable]
u8 mcapndx;
^~~~~~~

Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'sizeof_field-v5.5-rc5' of git://git./linux/kernel/git/kees/linux

Pull final sizeof_field conversion from Kees Cook:
"Remove now unused FIELD_SIZEOF() macro (Kees Cook)"

* tag 'sizeof_field-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kernel.h: Remove unused FIELD_SIZEOF()

Merge tag 'gcc-plugins-v5.5-rc5' of git://git./linux/kernel/git/kees/linux

Pull gcc-plugins fix from Kees Cook:
"Build flexibility fix: allow builds to disable plugins even when
plugins available (Arnd Bergmann)"

* tag 'gcc-plugins-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: make it possible to disable CONFIG_GCC_PLUGINS again

Merge tag 'seccomp-v5.5-rc5' of git://git./linux/kernel/git/kees/linux

Pull seccomp fixes from Kees Cook:
"Fixes for seccomp_notify_ioctl uapi sanity from Sargun Dhillon.

  The bulk of this is fixing the surrounding samples and selftests so
  that seccomp can correctly validate the seccomp_notify_ioctl buffer as
  being initially zeroed.

  Summary:

   - Fix samples and selftests to zero passed-in buffer

   - Enforce zeroed buffer checking

   - Verify buffer sanity check in selftest"

* tag 'seccomp-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  selftests/seccomp: Catch garbage on SECCOMP_IOCTL_NOTIF_RECV
  seccomp: Check that seccomp_notif is zeroed out by the user
  selftests/seccomp: Zero out seccomp_notif
  samples/seccomp: Zero out members based on seccomp_notif_sizes

MIPS: Avoid VDSO ABI breakage due to global register variable

Declaring __current_thread_info as a global register variable has the
effect of preventing GCC from saving & restoring its value in cases
where the ABI would typically do so.

To quote GCC documentation:

> If the register is a call-saved register, call ABI is affected: the
> register will not be restored in function epilogue sequences after the
> variable has been assigned. Therefore, functions cannot safely return
> to callers that assume standard ABI.

When our position independent VDSO is built for the n32 or n64 ABIs all
functions it exposes should be preserving the value of $gp/$28 for their
caller, but in the presence of the __current_thread_info global register
variable GCC stops doing so & simply clobbers $gp/$28 when calculating
the address of the GOT.

In cases where the VDSO returns success this problem will typically be
masked by the caller in libc returning & restoring $gp/$28 itself, but
that is by no means guaranteed. In cases where the VDSO returns an error
libc will typically contain a fallback path which will now fail
(typically with a bad memory access) if it attempts anything which
relies upon the value of $gp/$28 - eg. accessing anything via the GOT.

One fix for this would be to move the declaration of
__current_thread_info inside the current_thread_info() function,
demoting it from global register variable to local register variable &
avoiding inadvertently creating a non-standard calling ABI for the VDSO.
Unfortunately this causes issues for clang, which doesn't support local
register variables as pointed out by commit fe92da0f355e ("MIPS: Changed
current_thread_info() to an equivalent supported by both clang and GCC")
which introduced the global register variable before we had a VDSO to
worry about.

Instead, fix this by continuing to use the global register variable for
the kernel proper but declare __current_thread_info as a simple extern
variable when building the VDSO. It should never be referenced, and will
cause a link error if it is. This resolves the calling convention issue
for the VDSO without having any impact upon the build of the kernel
itself for either clang or gcc.

Signed-off-by: Paul Burton <paulburton@kernel.org>
Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <christian.brauner@canonical.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org> # v4.4+
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Merge tag 'pstore-v5.5-rc5' of git://git./linux/kernel/git/kees/linux

Pull pstore bug fixes from Kees Cook:

- always reset circular buffer state when writing new dump (Aleksandr
   Yashkin)

- fix rare error-path memory leak (Kees Cook)

* tag 'pstore-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Write new dumps to start of recycled zones
  pstore/ram: Fix error-path memory leak in persistent_ram_new() callers

Revert "fs: remove ksys_dup()"

This reverts commit 8243186f0cc7 ("fs: remove ksys_dup()") and the
subsequent fix for it in commit 2d3145f8d280 ("early init: fix error
handling when opening /dev/console").

Trying to use filp_open() and f_dupfd() instead of pseudo-syscalls
caused more trouble than what is worth it: it requires accessing vfs
internals and it turns out there were other bugs in it too.

In particular, the file reference counting was wrong - because unlike
the original "open+2*dup" sequence it used "filp_open+3*f_dupfd" and
thus had an extra leaked file reference.

That in turn then caused odd problems with Androidx86 long after boot
becaue of how the extra reference to the console kept the session active
even after all file descriptors had been closed.

Reported-by: youling 257 <youling257@gmail.com>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gcc-plugins: make it possible to disable CONFIG_GCC_PLUGINS again

I noticed that randconfig builds with gcc no longer produce a lot of
ccache hits, unlike with clang, and traced this back to plugins
now being enabled unconditionally if they are supported.

I am now working around this by adding

export CCACHE_COMPILERCHECK=/usr/bin/size -A %compiler%

to my top-level Makefile. This changes the heuristic that ccache uses
to determine whether the plugins are the same after a 'make clean'.

However, it also seems that being able to just turn off the plugins is
generally useful, at least for build testing it adds noticeable overhead
but does not find a lot of bugs additional bugs, and may be easier for
ccache users than my workaround.

Fixes: 9f671e58159a ("security: Create "kernel hardening" config area")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20191211133951.401933-1-arnd@arndb.de
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Catch garbage on SECCOMP_IOCTL_NOTIF_RECV

This adds logic to the user_notification_basic test to set a member
of struct seccomp_notif to an invalid value to ensure that the kernel
returns EINVAL if any of the struct seccomp_notif members are set to
invalid values.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191230203811.4996-1-sargun@sargun.me
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>

seccomp: Check that seccomp_notif is zeroed out by the user

This patch is a small change in enforcement of the uapi for
SECCOMP_IOCTL_NOTIF_RECV ioctl. Specifically, the datastructure which
is passed (seccomp_notif) must be zeroed out. Previously any of its
members could be set to nonsense values, and we would ignore it.

This ensures all fields are set to their zero value.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Acked-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20191229062451.9467-2-sargun@sargun.me
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>

selftests/seccomp: Zero out seccomp_notif

The seccomp_notif structure should be zeroed out prior to calling the
SECCOMP_IOCTL_NOTIF_RECV ioctl. Previously, the kernel did not check
whether these structures were zeroed out or not, so these worked.

This patch zeroes out the seccomp_notif data structure prior to calling
the ioctl.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191229062451.9467-1-sargun@sargun.me
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>

samples/seccomp: Zero out members based on seccomp_notif_sizes

The sizes by which seccomp_notif and seccomp_notif_resp are allocated are
based on the SECCOMP_GET_NOTIF_SIZES ioctl. This allows for graceful
extension of these datastructures. If userspace zeroes out the
datastructure based on its version, and it is lagging behind the kernel's
version, it will end up sending trailing garbage. On the other hand,
if it is ahead of the kernel version, it will write extra zero space,
and potentially cause corruption.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20191230203503.4925-1-sargun@sargun.me
Fixes: fec7b6690541 ("samples: add an example of seccomp user trap")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>

pstore/ram: Write new dumps to start of recycled zones

The ram_core.c routines treat przs as circular buffers. When writing a
new crash dump, the old buffer needs to be cleared so that the new dump
doesn't end up in the wrong place (i.e. at the end).

The solution to this problem is to reset the circular buffer state before
writing a new Oops dump.

Signed-off-by: Aleksandr Yashkin <a.yashkin@inango-systems.com>
Signed-off-by: Nikolay Merinov <n.merinov@inango-systems.com>
Signed-off-by: Ariel Gilman <a.gilman@inango-systems.com>
Link: https://lore.kernel.org/r/20191223133816.28155-1-n.merinov@inango-systems.com
Fixes: 896fc1f0c4c6 ("pstore/ram: Switch to persistent_ram routines")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>

pstore/ram: Fix error-path memory leak in persistent_ram_new() callers

For callers that allocated a label for persistent_ram_new(), if the call
fails, they must clean up the allocation.

Suggested-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Fixes: 1227daa43bce ("pstore/ram: Clarify resource reservation labels")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/20191211191353.14385-1-navid.emamdoost@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>

apparmor: only get a label reference if the fast path check fails

The common fast path check can be done under rcu_read_lock() and
doesn't need a reference count on the label. Only take a reference
count if entering the slow path.

Fixes reported hackbench regression
  - sha1 79e178a57dae ("Merge tag 'apparmor-pr-2019-12-03' of
    git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor")

  hackbench -l (256000/#grp) -g #grp
   128 groups     19.679 ±0.90%

  - previous sha1 01d1dff64662 ("Merge tag 's390-5.5-2' of
    git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux")

  hackbench -l (256000/#grp) -g #grp
   128 groups     3.1689 ±3.04%

Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: bce4e7e9c45e ("apparmor: reduce rcu_read_lock scope for aa_file_perm mediation")
Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: fix bind mounts aborting with -ENOMEM

With commit df323337e507 ("apparmor: Use a memory pool instead per-CPU
caches, 2019-05-03"), AppArmor code was converted to use memory pools. In
that conversion, a bug snuck into the code that polices bind mounts that
causes all bind mounts to fail with -ENOMEM, as we erroneously error out
if `aa_get_buffer` returns a pointer instead of erroring out when it
does _not_ return a valid pointer.

Fix the issue by correctly checking for valid pointers returned by
`aa_get_buffer` to fix bind mounts with AppArmor.

Fixes: df323337e507 ("apparmor: Use a memory pool instead per-CPU caches")
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: John Johansen <john.johansen@canonical.com>

Merge tag 'amd-drm-fixes-5.5-2020-01-01' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.5-2020-01-01:

amdgpu:
- ATPX regression fix
- SMU metrics table locking fixes
- gfxoff fix for raven
- RLC firmware loading stability fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200101151307.5242-1-alexander.deucher@amd.com

Merge tag 'drm-misc-fixes-2019-12-31' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

-sun4i: Fix double-free in connector/encoder cleanup (Stefan)
-malidp: Make vtable static (Ben)

Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191231152503.GA46740@art_vandelay

Merge tag 'mediatek-drm-fixes-5.5' of https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes

Mediatek DRM fixes for Linux 5.5

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1577762298.23194.2.camel@mtksdaap41

drm/amdgpu: correct RLC firmwares loading sequence

Per confirmation with RLC firmware team, the RLC should
be unhalted after all RLC related firmwares uploaded.
However, in fact the RLC is unhalted immediately after
RLCG firmware uploaded. And that may causes unexpected
PSP hang on loading the succeeding RLC save restore
list related firmwares.
So, we correct the firmware loading sequence to load
RLC save restore list related firmwares before RLCG
ucode. That will help to get around this issue.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org