git.monstr.eu Git - linux-2.6-microblaze.git/log

mm: workingset: age nonresident information alongside anonymous pages

Patch series "fix for "mm: balance LRU lists based on relative
thrashing" patchset"

This patchset fixes some problems of the patchset, "mm: balance LRU
lists based on relative thrashing", which is now merged on the mainline.

Patch "mm: workingset: let cache workingset challenge anon fix" is the
result of discussion with Johannes.  See following link.

  http://lkml.kernel.org/r/20200520232525.798933-6-hannes@cmpxchg.org

And, the other two are minor things which are found when I try to rebase
my patchset.

This patch (of 3):

After ("mm: workingset: let cache workingset challenge anon fix"), we
compare refault distances to active_file + anon.  But age of the
non-resident information is only driven by the file LRU.  As a result,
we may overestimate the recency of any incoming refaults and activate
them too eagerly, causing unnecessary LRU churn in certain situations.

Make anon aging drive nonresident age as well to address that.

Link: http://lkml.kernel.org/r/1592288204-27734-1-git-send-email-iamjoonsoo.kim@lge.com
Link: http://lkml.kernel.org/r/1592288204-27734-2-git-send-email-iamjoonsoo.kim@lge.com
Fixes: 34e58cac6d8f2a ("mm: workingset: let cache workingset challenge anon")
Reported-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

doc: THP CoW fault no longer allocate THP

Since commit 3917c80280c9 ("thp: change CoW semantics for anon-THP"),
THP CoW page fault is rewritten. Now it just splits pmd then fallback
to base page fault, it doesn't try to allocate THP anymore. So it is no
longer counted in THP_FAULT_ALLOC.

Remove the obsolete statement in documentation about THP CoW allocation
to avoid confusion.

Link: http://lkml.kernel.org/r/1592424895-5421-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

docs: mm/gup: minor documentation update

Now there are 5 cases. Updated the same.

Link: http://lkml.kernel.org/r/1592422023-7401-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcontrol.c: prevent missed memory.low load tears

Looks like one of these got missed when massaging in f86b810c2610 ("mm,
memcg: prevent memory.low load/store tearing") with other linux-mm
changes.

Link: http://lkml.kernel.org/r/20200612174437.GA391453@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Reported-by: Michal Koutny <mkoutny@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcontrol.c: add missed css_put()

We should put the css reference when memory allocation failed.

Link: http://lkml.kernel.org/r/20200614122653.98829-1-songmuchun@bytedance.com
Fixes: f0a3a24b532d ("mm: memcg/slab: rework non-root kmem_cache lifecycle management")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: handle div0 crash race condition in memory.low

Tejun reports seeing rare div0 crashes in memory.low stress testing:

  RIP: 0010:mem_cgroup_calculate_protection+0xed/0x150
  Code: 0f 46 d1 4c 39 d8 72 57 f6 05 16 d6 42 01 40 74 1f 4c 39 d8 76 1a 4c 39 d1 76 15 4c 29 d1 4c 29 d8 4d 29 d9 31 d2 48 0f af c1 <49> f7 f1 49 01 c2 4c 89 96 38 01 00 00 5d c3 48 0f af c7 31 d2 49
  RSP: 0018:ffffa14e01d6fcd0 EFLAGS: 00010246
  RAX: 000000000243e384 RBX: 0000000000000000 RCX: 0000000000008f4b
  RDX: 0000000000000000 RSI: ffff8b89bee84000 RDI: 0000000000000000
  RBP: ffffa14e01d6fcd0 R08: ffff8b89ca7d40f8 R09: 0000000000000000
  R10: 0000000000000000 R11: 00000000006422f7 R12: 0000000000000000
  R13: ffff8b89d9617000 R14: ffff8b89bee84000 R15: ffffa14e01d6fdb8
  FS:  0000000000000000(0000) GS:ffff8b8a1f1c0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f93b1fc175b CR3: 000000016100a000 CR4: 0000000000340ea0
  Call Trace:
    shrink_node+0x1e5/0x6c0
    balance_pgdat+0x32d/0x5f0
    kswapd+0x1d7/0x3d0
    kthread+0x11c/0x160
    ret_from_fork+0x1f/0x30

This happens when parent_usage == siblings_protected.

We check that usage is bigger than protected, which should imply
parent_usage being bigger than siblings_protected.  However, we don't
read (or even update) these values atomically, and they can be out of
sync as the memory state changes under us.  A bit of fluctuation around
the target protection isn't a big deal, but we need to handle the div0
case.

Check the parent state explicitly to make sure we have a reasonable
positive value for the divisor.

Link: http://lkml.kernel.org/r/20200615140658.601684-1-hannes@cmpxchg.org
Fixes: 8a931f801340 ("mm: memcontrol: recursive memory.low protection")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Chris Down <chris@chrisdown.name>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc.c: fix a warning while make xmldocs

This patch fixes following warning while "make xmldocs"

mm/vmalloc.c:1877: warning: Excess function parameter 'prot' description in 'vm_map_ram'

This warning started since commit d4efd79a81ab ("mm: remove the prot
argument from vm_map_ram").

Link: http://lkml.kernel.org/r/20200622152850.140871-1-standby24x7@gmail.com
Fixes: d4efd79a81ab ("mm: remove the prot argument from vm_map_ram")
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

media: omap3isp: remove cacheflush.h

After mm.h was removed from the asm-generic version of cacheflush.h,
s390 allyesconfig shows several warnings of the following nature:

  In file included from arch/s390/include/generated/asm/cacheflush.h:1,
                   from drivers/media/platform/omap3isp/isp.c:42:
  include/asm-generic/cacheflush.h:16:42: warning: 'struct mm_struct' declared inside parameter list will not be visible outside of this definition or declaration

As Geert and Laurent point out, this driver does not need this header in
the two files that include it.  Remove it so there are no warnings.

Link: http://lkml.kernel.org/r/20200622234740.72825-2-natechancellor@gmail.com
Fixes: e0cf615d725c ("asm-generic: don't include <linux/mm.h> in cacheflush.h")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

make asm-generic/cacheflush.h more standalone

Some s390 builds get these warnings:

  include/asm-generic/cacheflush.h:16:42: warning: 'struct mm_struct' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:22:46: warning: 'struct mm_struct' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:28:45: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:36:44: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:44:45: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:52:50: warning: 'struct address_space' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:58:52: warning: 'struct address_space' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:75:17: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:74:45: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:82:16: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:81:50: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration

Forward declare the named structs to get rid of these.

Link: http://lkml.kernel.org/r/20200623135714.4dae4b8a@canb.auug.org.au
Fixes: e0cf615d725c ("asm-generic: don't include <linux/mm.h> in cacheflush.h")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/debug_vm_pgtable: fix build failure with powerpc 8xx

Since commit 9e343b467c70 ("READ_ONCE: Enforce atomicity for
{READ,WRITE}_ONCE() memory accesses"), READ_ONCE() cannot be used
anymore to read complex page table entries.

This leads to:

      CC      mm/debug_vm_pgtable.o
    In file included from ./include/asm-generic/bug.h:5,
                     from ./arch/powerpc/include/asm/bug.h:109,
                     from ./include/linux/bug.h:5,
                     from ./include/linux/mmdebug.h:5,
                     from ./include/linux/gfp.h:5,
                     from mm/debug_vm_pgtable.c:13:
    In function 'pte_clear_tests',
        inlined from 'debug_vm_pgtable' at mm/debug_vm_pgtable.c:363:2:
    ./include/linux/compiler.h:392:38: error: Unsupported access size for {READ,WRITE}_ONCE().
    mm/debug_vm_pgtable.c:249:14: note: in expansion of macro 'READ_ONCE'
      249 |  pte_t pte = READ_ONCE(*ptep);
          |              ^~~~~~~~~
    make[2]: *** [mm/debug_vm_pgtable.o] Error 1

Fix it by using the recently added ptep_get() helper.

Link: http://lkml.kernel.org/r/6ca8c972e6c920dc4ae0d4affbed9703afa4d010.1592490570.git.christophe.leroy@csgroup.eu
Fixes: 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory.c: properly pte_offset_map_lock/unlock in vm_insert_pages()

Calls to pte_offset_map() in vm_insert_pages() are erroneously not
matched with a call to pte_unmap(). This would cause problems on
architectures where that is not a no-op.

This patch does away with the non-traditional locking in the existing
code, and instead uses pte_offset_map_lock/unlock() as usual,
incrementing PTE as necessary. The PTE pointer is kept within bounds
since we clamp it with PTRS_PER_PTE.

Link: http://lkml.kernel.org/r/20200618220446.20284-1-arjunroy.kdev@gmail.com
Fixes: 8cd3984d81d5 ("mm/memory.c: add vm_insert_pages()")
Signed-off-by: Arjun Roy <arjunroy@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix swap cache node allocation mask

Chris Murphy reports that a slightly overcommitted load, testing swap
and zram along with i915, splats and keeps on splatting, when it had
better fail less noisily:

  gnome-shell: page allocation failure: order:0,
  mode:0x400d0(__GFP_IO|__GFP_FS|__GFP_COMP|__GFP_RECLAIMABLE),
  nodemask=(null),cpuset=/,mems_allowed=0
  CPU: 2 PID: 1155 Comm: gnome-shell Not tainted 5.7.0-1.fc33.x86_64 #1
  Call Trace:
    dump_stack+0x64/0x88
    warn_alloc.cold+0x75/0xd9
    __alloc_pages_slowpath.constprop.0+0xcfa/0xd30
    __alloc_pages_nodemask+0x2df/0x320
    alloc_slab_page+0x195/0x310
    allocate_slab+0x3c5/0x440
    ___slab_alloc+0x40c/0x5f0
    __slab_alloc+0x1c/0x30
    kmem_cache_alloc+0x20e/0x220
    xas_nomem+0x28/0x70
    add_to_swap_cache+0x321/0x400
    __read_swap_cache_async+0x105/0x240
    swap_cluster_readahead+0x22c/0x2e0
    shmem_swapin+0x8e/0xc0
    shmem_swapin_page+0x196/0x740
    shmem_getpage_gfp+0x3a2/0xa60
    shmem_read_mapping_page_gfp+0x32/0x60
    shmem_get_pages+0x155/0x5e0 [i915]
    __i915_gem_object_get_pages+0x68/0xa0 [i915]
    i915_vma_pin+0x3fe/0x6c0 [i915]
    eb_add_vma+0x10b/0x2c0 [i915]
    i915_gem_do_execbuffer+0x704/0x3430 [i915]
    i915_gem_execbuffer2_ioctl+0x1ea/0x3e0 [i915]
    drm_ioctl_kernel+0x86/0xd0 [drm]
    drm_ioctl+0x206/0x390 [drm]
    ksys_ioctl+0x82/0xc0
    __x64_sys_ioctl+0x16/0x20
    do_syscall_64+0x5b/0xf0
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported on 5.7, but it goes back really to 3.1: when
shmem_read_mapping_page_gfp() was implemented for use by i915, and
allowed for __GFP_NORETRY and __GFP_NOWARN flags in most places, but
missed swapin's "& GFP_KERNEL" mask for page tree node allocation in
__read_swap_cache_async() - that was to mask off HIGHUSER_MOVABLE bits
from what page cache uses, but GFP_RECLAIM_MASK is now what's needed.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=208085
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2006151330070.11064@eggly.anvils
Fixes: 68da9f055755 ("tmpfs: pass gfp to shmem_getpage_gfp")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Chris Murphy <lists@colorremedies.com>
Analyzed-by: Vlastimil Babka <vbabka@suse.cz>
Analyzed-by: Matthew Wilcox <willy@infradead.org>
Tested-by: Chris Murphy <lists@colorremedies.com>
Cc: <stable@vger.kernel.org> [3.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: cure list_slab_objects() from double fix

According to Christopher Lameter two fixes have been merged for the same
problem. As far as I can tell, the code does not acquire the list_lock
and invoke kmalloc(). list_slab_objects() misses an unlock (the
counterpart to get_map()) and the memory allocated in free_partial()
isn't used.

Revert the mentioned commit.

Link: http://lkml.kernel.org/r/20200618201234.795692-1-bigeasy@linutronix.de
Fixes: aa456c7aebb14 ("slub: remove kmalloc under list_lock from list_slab_objects() V2")
Link: https://lkml.kernel.org/r/alpine.DEB.2.22.394.2006181501480.12014@www.lameter.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/slab: use memzero_explicit() in kzfree()

The kzfree() function is normally used to clear some sensitive
information, like encryption keys, in the buffer before freeing it back to
the pool. Memset() is currently used for buffer clearing. However
unlikely, there is still a non-zero probability that the compiler may
choose to optimize away the memory clearing especially if LTO is being
used in the future.

To make sure that this optimization will never happen,
memzero_explicit(), which is introduced in v3.18, is now used in
kzfree() to future-proof it.

Link: http://lkml.kernel.org/r/20200616154311.12314-2-longman@redhat.com
Fixes: 3ef0e5ba4673 ("slab: introduce kzfree()")
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, slab: fix sign conversion problem in memcg_uncharge_slab()

It was found that running the LTP test on a PowerPC system could produce
erroneous values in /proc/meminfo, like:

  MemTotal:       531915072 kB
  MemFree:        507962176 kB
  MemAvailable:   1100020596352 kB

Using bisection, the problem is tracked down to commit 9c315e4d7d8c ("mm:
memcg/slab: cache page number in memcg_(un)charge_slab()").

In memcg_uncharge_slab() with a "int order" argument:

  unsigned int nr_pages = 1 << order;
    :
  mod_lruvec_state(lruvec, cache_vmstat_idx(s), -nr_pages);

The mod_lruvec_state() function will eventually call the
__mod_zone_page_state() which accepts a long argument.  Depending on the
compiler and how inlining is done, "-nr_pages" may be treated as a
negative number or a very large positive number.  Apparently, it was
treated as a large positive number in that PowerPC system leading to
incorrect stat counts.  This problem hasn't been seen in x86-64 yet,
perhaps the gcc compiler there has some slight difference in behavior.

It is fixed by making nr_pages a signed value.  For consistency, a similar
change is applied to memcg_charge_slab() as well.

Link: http://lkml.kernel.org/r/20200620184719.10994-1-longman@redhat.com
Fixes: 9c315e4d7d8c ("mm: memcg/slab: cache page number in memcg_(un)charge_slab()").
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: fix test_hmm.c reference after free

Coccinelle scripts report the following errors:

  lib/test_hmm.c:523:20-26: ERROR: reference preceded by free on line 521
  lib/test_hmm.c:524:21-27: ERROR: reference preceded by free on line 521
  lib/test_hmm.c:523:28-35: ERROR: devmem is NULL but dereferenced.
  lib/test_hmm.c:524:29-36: ERROR: devmem is NULL but dereferenced.

Fix these by using the local variable 'res' instead of devmem.

Link: http://lkml.kernel.org/r/c845c158-9c65-9665-0d0b-00342846dd07@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: fix value of OCFS2_INVALID_SLOT

In the ocfs2 disk layout, slot number is 16 bits, but in ocfs2
implementation, slot number is 32 bits.  Usually this will not cause any
issue, because slot number is converted from u16 to u32, but
OCFS2_INVALID_SLOT was defined as -1, when an invalid slot number from
disk was obtained, its value was (u16)-1, and it was converted to u32.
Then the following checking in get_local_system_inode will be always
skipped:

static struct inode **get_local_system_inode(struct ocfs2_super *osb,
                                               int type,
                                               u32 slot)
{
BUG_ON(slot == OCFS2_INVALID_SLOT);
...
}

Link: http://lkml.kernel.org/r/20200616183829.87211-5-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: fix panic on nfs server over ocfs2

The following kernel panic was captured when running nfs server over
ocfs2, at that time ocfs2_test_inode_bit() was checking whether one
inode locating at "blkno" 5 was valid, that is ocfs2 root inode, its
"suballoc_slot" was OCFS2_INVALID_SLOT(65535) and it was allocted from
//global_inode_alloc, but here it wrongly assumed that it was got from per
slot inode alloctor which would cause array overflow and trigger kernel
panic.

  BUG: unable to handle kernel paging request at 0000000000001088
  IP: [<ffffffff816f6898>] _raw_spin_lock+0x18/0xf0
  PGD 1e06ba067 PUD 1e9e7d067 PMD 0
  Oops: 0002 [#1] SMP
  CPU: 6 PID: 24873 Comm: nfsd Not tainted 4.1.12-124.36.1.el6uek.x86_64 #2
  Hardware name: Huawei CH121 V3/IT11SGCA1, BIOS 3.87 02/02/2018
  RIP: _raw_spin_lock+0x18/0xf0
  RSP: e02b:ffff88005ae97908  EFLAGS: 00010206
  RAX: ffff88005ae98000 RBX: 0000000000001088 RCX: 0000000000000000
  RDX: 0000000000020000 RSI: 0000000000000009 RDI: 0000000000001088
  RBP: ffff88005ae97928 R08: 0000000000000000 R09: ffff880212878e00
  R10: 0000000000007ff0 R11: 0000000000000000 R12: 0000000000001088
  R13: ffff8800063c0aa8 R14: ffff8800650c27d0 R15: 000000000000ffff
  FS:  0000000000000000(0000) GS:ffff880218180000(0000) knlGS:ffff880218180000
  CS:  e033 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000001088 CR3: 00000002033d0000 CR4: 0000000000042660
  Call Trace:
    igrab+0x1e/0x60
    ocfs2_get_system_file_inode+0x63/0x3a0 [ocfs2]
    ocfs2_test_inode_bit+0x328/0xa00 [ocfs2]
    ocfs2_get_parent+0xba/0x3e0 [ocfs2]
    reconnect_path+0xb5/0x300
    exportfs_decode_fh+0xf6/0x2b0
    fh_verify+0x350/0x660 [nfsd]
    nfsd4_putfh+0x4d/0x60 [nfsd]
    nfsd4_proc_compound+0x3d3/0x6f0 [nfsd]
    nfsd_dispatch+0xe0/0x290 [nfsd]
    svc_process_common+0x412/0x6a0 [sunrpc]
    svc_process+0x123/0x210 [sunrpc]
    nfsd+0xff/0x170 [nfsd]
    kthread+0xcb/0xf0
    ret_from_fork+0x61/0x90
  Code: 83 c2 02 0f b7 f2 e8 18 dc 91 ff 66 90 eb bf 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 53 0f 1f 44 00 00 48 89 fb ba 00 00 02 00 <f0> 0f c1 17 89 d0 45 31 e4 45 31 ed c1 e8 10 66 39 d0 41 89 c6
  RIP   _raw_spin_lock+0x18/0xf0
  CR2: 0000000000001088
  ---[ end trace 7264463cd1aac8f9 ]---
  Kernel panic - not syncing: Fatal exception

Link: http://lkml.kernel.org/r/20200616183829.87211-4-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: load global_inode_alloc

Set global_inode_alloc as OCFS2_FIRST_ONLINE_SYSTEM_INODE, that will
make it load during mount. It can be used to test whether some
global/system inodes are valid. One use case is that nfsd will test
whether root inode is valid.

Link: http://lkml.kernel.org/r/20200616183829.87211-3-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: avoid inode removal while nfsd is accessing it

Patch series "ocfs2: fix nfsd over ocfs2 issues", v2.

This is a series of patches to fix issues on nfsd over ocfs2. patch 1
is to avoid inode removed while nfsd access it patch 2 & 3 is to fix a
panic issue.

This patch (of 4):

When nfsd is getting file dentry using handle or parent dentry of some
dentry, one cluster lock is used to avoid inode removed from other node,
but it still could be removed from local node, so use a rw lock to avoid
this.

Link: http://lkml.kernel.org/r/20200616183829.87211-1-junxiao.bi@oracle.com
Link: http://lkml.kernel.org/r/20200616183829.87211-2-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kexec: do not verify the signature without the lockdown or mandatory signature

Signature verification is an important security feature, to protect
system from being attacked with a kernel of unknown origin.  Kexec
rebooting is a way to replace the running kernel, hence need be secured
carefully.

In the current code of handling signature verification of kexec kernel,
the logic is very twisted.  It mixes signature verification, IMA
signature appraising and kexec lockdown.

If there is no KEXEC_SIG_FORCE, kexec kernel image doesn't have one of
signature, the supported crypto, and key, we don't think this is wrong,
Unless kexec lockdown is executed.  IMA is considered as another kind of
signature appraising method.

If kexec kernel image has signature/crypto/key, it has to go through the
signature verification and pass.  Otherwise it's seen as verification
failure, and won't be loaded.

Seems kexec kernel image with an unqualified signature is even worse
than those w/o signature at all, this sounds very unreasonable.  E.g.
If people get a unsigned kernel to load, or a kernel signed with expired
key, which one is more dangerous?

So, here, let's simplify the logic to improve code readability.  If the
KEXEC_SIG_FORCE enabled or kexec lockdown enabled, signature
verification is mandated.  Otherwise, we lift the bar for any kernel
image.

Link: http://lkml.kernel.org/r/20200602045952.27487-1-lijiang@redhat.com
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Reviewed-by: Jiri Bohac <jbohac@suse.cz>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Matthew Garrett <mjg59@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, compaction: make capture control handling safe wrt interrupts

Hugh reports:

"While stressing compaction, one run oopsed on NULL capc->cc in
  __free_one_page()'s task_capc(zone): compact_zone_order() had been
  interrupted, and a page was being freed in the return from interrupt.

  Though you would not expect it from the source, both gccs I was using
  (4.8.1 and 7.5.0) had chosen to compile compact_zone_order() with the
  ".cc = &cc" implemented by mov %rbx,-0xb0(%rbp) immediately before
  callq compact_zone - long after the "current->capture_control =
  &capc". An interrupt in between those finds capc->cc NULL (zeroed by
  an earlier rep stos).

  This could presumably be fixed by a barrier() before setting
  current->capture_control in compact_zone_order(); but would also need
  more care on return from compact_zone(), in order not to risk leaking
  a page captured by interrupt just before capture_control is reset.

  Maybe that is the preferable fix, but I felt safer for task_capc() to
  exclude the rather surprising possibility of capture at interrupt
  time"

I have checked that gcc10 also behaves the same.

The advantage of fix in compact_zone_order() is that we don't add
another test in the page freeing hot path, and that it might prevent
future problems if we stop exposing pointers to uninitialized structures
in current task.

So this patch implements the suggestion for compact_zone_order() with
barrier() (and WRITE_ONCE() to prevent store tearing) for setting
current->capture_control, and prevents page leaking with
WRITE_ONCE/READ_ONCE in the proper order.

Link: http://lkml.kernel.org/r/20200616082649.27173-1-vbabka@suse.cz
Fixes: 5e1f0f098b46 ("mm, compaction: capture a page under direct compaction")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Hugh Dickins <hughd@google.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Li Wang <liwang@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [5.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: do_swap_page(): fix up the error code

do_swap_page() returns error codes from the VM_FAULT* space.  try_charge()
might return -ENOMEM, though, and then do_swap_page() simply returns 0
which means a success.

We almost never return ENOMEM for GFP_KERNEL single page charge.  Except
for async OOM handling (oom_disabled v1).  So this needs translation to
VM_FAULT_OOM otherwise the the page fault path will not notify the
userspace and wait for an action.

Link: http://lkml.kernel.org/r/20200617090238.GL9499@dhcp22.suse.cz
Fixes: 4c6355b25e8b ("mm: memcontrol: charge swapin pages on instantiation")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

openrisc: fix boot oops when DEBUG_VM is enabled

Since v5.8-rc1 OpenRISC Linux fails to boot when DEBUG_VM is enabled.
This has been bisected to commit 42fc541404f2 ("mmap locking API: add
mmap_assert_locked() and mmap_assert_write_locked()").

The added locking checks exposed the issue that OpenRISC was not taking
this mmap lock when during page walks for DMA operations. This patch
locks and unlocks the mmap lock for page walking.

Link: http://lkml.kernel.org/r/20200617090247.1680188-1-shorne@gmail.com
Fixes: 42fc541404f2 ("mmap locking API: add mmap_assert_locked() and mmap_assert_write_locked()"
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Steven Price <steven.price@arm.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 's390-5.8-3' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Heiko Carstens:

- Fix kernel crash on system call single stepping.

- Make sure early program check handler is executed with DAT on to
   avoid an endless program check loop.

- Add __GFP_NOWARN flag to debug feature to avoid user triggerable
   allocation failure messages.

* tag 's390-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/debug: avoid kernel warning on too large number of pages
  s390/kasan: fix early pgm check handler execution
  s390: fix system call single stepping

Merge tag 'sound-5.8-rc3' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A collection of small fixes gathered in the last two weeks.

  The major changes here are fixes for the recent DPCM regressions found
  on i.MX and Qualcomm platforms and fixes for resource leaks in ASoC
  DAI registrations.

  Other than those are mostly device-specific fixes including the usual
  USB- and HD-audio quirks, and a fix for syzkaller case and ID updates
  for new Intel platforms"

* tag 'sound-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits)
  ALSA: usb-audio: Fix OOB access of mixer element list
  ALSA: usb-audio: add quirk for Samsung USBC Headset (AKG)
  ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Flight S
  ASoC: rockchip: Fix a reference count leak.
  ASoC: amd: closing specific instance.
  ALSA: hda: Intel: add missing PCI IDs for ICL-H, TGL-H and EKL
  ASoC: hdac_hda: fix memleak with regmap not freed on remove
  ASoC: SOF: Intel: add PCI IDs for ICL-H and TGL-H
  ASoC: SOF: Intel: add PCI ID for CometLake-S
  ASoC: Intel: SOF: merge COMETLAKE_LP and COMETLAKE_H
  ALSA: hda/realtek: Add mute LED and micmute LED support for HP systems
  ALSA: usb-audio: Fix potential use-after-free of streams
  ALSA: hda/realtek - Add quirk for MSI GE63 laptop
  ASoC: fsl_ssi: Fix bclk calculation for mono channel
  ASoC: SOF: Intel: hda: Clear RIRB status before reading WP
  ASoC: rt1015: Update rt1015 default register value according to spec modification.
  ASoC: qcom: common: set correct directions for dailinks
  ASoc: q6afe: add support to get port direction
  ASoC: soc-pcm: fix checks for multi-cpu FE dailinks
  ASoC: rt5682: Let dai clks be registered whether mclk exists or not
  ...

Merge tag 'erofs-for-5.8-rc3-fixes' of git://git./linux/kernel/git/xiang/erofs

Pull erofs fix from Gao Xiang:
"Fix a regression which uses potential uninitialized high 32-bit value
unexpectedly recently observed with specific compiler options"

* tag 'erofs-for-5.8-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix partially uninitialized misuse in z_erofs_onlinepage_fixup

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio fixes from Michael Tsirkin:
"Fixes all over the place.

  This includes a couple of tests that I would normally defer, but since
  they have already been helpful in catching some bugs, don't build for
  any users at all, and having them upstream makes life easier for
  everyone, I think it's ok even at this late stage"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  tools/virtio: Use tools/include/list.h instead of stubs
  tools/virtio: Reset index in virtio_test --reset.
  tools/virtio: Extract virtqueue initialization in vq_reset
  tools/virtio: Use __vring_new_virtqueue in virtio_test.c
  tools/virtio: Add --reset
  tools/virtio: Add --batch=random option
  tools/virtio: Add --batch option
  virtio-mem: add memory via add_memory_driver_managed()
  virtio-mem: silence a static checker warning
  vhost_vdpa: Fix potential underflow in vhost_vdpa_mmap()
  vdpa: fix typos in the comments for __vdpa_alloc_device()

Merge tag 'for-linus-2020-06-24' of git://git./linux/kernel/git/brauner/linux

Pull thread fix from Christian Brauner:
"This fixes a regression introduced with 303cc571d107 ("nsproxy: attach
  to namespaces via pidfds").

  The LTP testsuite reported a regression where users would now see
  EBADF returned instead of EINVAL when an fd was passed that referred
  to an open file but the file was not a namespace file.

  Fix this by continuing to report EINVAL and add a regression test"

* tag 'for-linus-2020-06-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  tests: test for setns() EINVAL regression
  nsproxy: restore EINVAL for non-namespace file descriptor

ALSA: usb-audio: Fix OOB access of mixer element list

The USB-audio mixer code holds a linked list of usb_mixer_elem_list,
and several operations are performed for each mixer element. A few of
them (snd_usb_mixer_notify_id() and snd_usb_mixer_interrupt_v2())
assume each mixer element being a usb_mixer_elem_info object that is a
subclass of usb_mixer_elem_list, cast via container_of() and access it
members. This may result in an out-of-bound access when a
non-standard list element has been added, as spotted by syzkaller
recently.

This patch adds a new field, is_std_info, in usb_mixer_elem_list to
indicate that the element is the usb_mixer_elem_info type or not, and
skip the access to such an element if needed.

Reported-by: syzbot+fb14314433463ad51625@syzkaller.appspotmail.com
Reported-by: syzbot+2405ca3401e943c538b5@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200624122340.9615-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

erofs: fix partially uninitialized misuse in z_erofs_onlinepage_fixup

Hongyu reported "id != index" in z_erofs_onlinepage_fixup() with
specific aarch64 environment easily, which wasn't shown before.

After digging into that, I found that high 32 bits of page->private
was set to 0xaaaaaaaa rather than 0 (due to z_erofs_onlinepage_init
behavior with specific compiler options). Actually we only use low
32 bits to keep the page information since page->private is only 4
bytes on most 32-bit platforms. However z_erofs_onlinepage_fixup()
uses the upper 32 bits by mistake.

Let's fix it now.

Reported-and-tested-by: Hongyu Jin <hongyu.jin@unisoc.com>
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20200618234349.22553-1-hsiangkao@aol.com
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"All bugfixes except for a couple cleanup patches"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: Remove vcpu_vmx's defunct copy of host_pkru
  KVM: x86: allow TSC to differ by NTP correction bounds without TSC scaling
  KVM: X86: Fix MSR range of APIC registers in X2APIC mode
  KVM: VMX: Stop context switching MSR_IA32_UMWAIT_CONTROL
  KVM: nVMX: Plumb L2 GPA through to PML emulation
  KVM: x86/mmu: Avoid mixing gpa_t with gfn_t in walk_addr_generic()
  KVM: LAPIC: ensure APIC map is up to date on concurrent update requests
  kvm: lapic: fix broken vcpu hotplug
  Revert "KVM: VMX: Micro-optimize vmexit time when not exposing PMU"
  KVM: VMX: Add helpers to identify interrupt type from intr_info
  kvm/svm: disable KCSAN for svm_vcpu_run()
  KVM: MIPS: Fix a build error for !CPU_LOONGSON64

Merge tag 'for-5.8-rc2-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"A number of fixes, located in two areas, one performance fix and one
  fixup for better integration with another patchset.

   - bug fixes in nowait aio:
       - fix snapshot creation hang after nowait-aio was used
       - fix failure to write to prealloc extent past EOF
       - don't block when extent range is locked

   - block group fixes:
       - relocation failure when scrub runs in parallel
       - refcount fix when removing fails
       - fix race between removal and creation
       - space accounting fixes

   - reinstante fast path check for log tree at unlink time, fixes
     performance drop up to 30% in REAIM

   - kzfree/kfree fixup to ease treewide patchset renaming kzfree"

* tag 'for-5.8-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: use kfree() in btrfs_ioctl_get_subvol_info()
  btrfs: fix RWF_NOWAIT writes blocking on extent locks and waiting for IO
  btrfs: fix RWF_NOWAIT write not failling when we need to cow
  btrfs: fix failure of RWF_NOWAIT write into prealloc extent beyond eof
  btrfs: fix hang on snapshot creation after RWF_NOWAIT write
  btrfs: check if a log root exists before locking the log_mutex on unlink
  btrfs: fix bytes_may_use underflow when running balance and scrub in parallel
  btrfs: fix data block group relocation failure due to concurrent scrub
  btrfs: fix race between block group removal and block group creation
  btrfs: fix a block group ref counter leak after failure to remove block group

ALSA: usb-audio: add quirk for Samsung USBC Headset (AKG)

We've found Samsung USBC Headset (AKG) (VID: 0x04e8, PID: 0xa051)
need a tiny delay after each class compliant request.
Otherwise the device might not be able to be recognized each times.

Signed-off-by: Chihhao Chen <chihhao.chen@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1592910203-24035-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

s390/debug: avoid kernel warning on too large number of pages

When specifying insanely large debug buffers a kernel warning is
printed. The debug code does handle the error gracefully, though.
Instead of duplicating the check let us silence the warning to
avoid crashes when panic_on_warn is used.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

s390/kasan: fix early pgm check handler execution

Currently if early_pgm_check_handler is called it ends up in pgm check
loop. The problem is that early_pgm_check_handler is instrumented by
KASAN but executed without DAT flag enabled which leads to addressing
exception when KASAN checks try to access shadow memory.

Fix that by executing early handlers with DAT flag on under KASAN as
expected.

Reported-and-tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

s390: fix system call single stepping

When single stepping an svc instruction on s390, the kernel is entered
with a PER program check interruption. The program check handler than
jumps to the system call handler by reloading the PSW. The code didn't
set GPR13 to the thread pointer in struct task_struct. This made the
kernel access invalid memory while trying to fetch the syscall function
address. Fix this by always assigned GPR13 after .Lsysc_per.

Fixes: 0b0ed657fe00 ("s390: remove critical section cleanup from entry.S")
Reported-and-tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Flight S

Similar to the Kingston HyperX AMP, the Kingston HyperX Cloud
Alpha S (0951:0x16ea) uses two interfaces, but only the second
interface contains the capture stream. This patch delays the
registration until the second interface appears.

Signed-off-by: Christoffer Nielsen <cn@obviux.dk>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAOtG2YHOM3zy+ed9KS-J4HkZo_QGzcUG9MigSp4e4_-13r6B=Q@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

KVM: VMX: Remove vcpu_vmx's defunct copy of host_pkru

Remove vcpu_vmx.host_pkru, which got left behind when PKRU support was
moved to common x86 code.

No functional change intended.

Fixes: 37486135d3a7b ("KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200617034123.25647-1-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: allow TSC to differ by NTP correction bounds without TSC scaling

The Linux TSC calibration procedure is subject to small variations
(its common to see +-1 kHz difference between reboots on a given CPU, for example).

So migrating a guest between two hosts with identical processor can fail, in case
of a small variation in calibrated TSC between them.

Without TSC scaling, the current kernel interface will either return an error
(if user_tsc_khz <= tsc_khz) or enable TSC catchup mode.

This change enables the following TSC tolerance check to
accept KVM_SET_TSC_KHZ within tsc_tolerance_ppm (which is 250ppm by default).

        /*
         * Compute the variation in TSC rate which is acceptable
         * within the range of tolerance and decide if the
         * rate being applied is within that bounds of the hardware
         * rate.  If so, no scaling or compensation need be done.
         */
        thresh_lo = adjust_tsc_khz(tsc_khz, -tsc_tolerance_ppm);
        thresh_hi = adjust_tsc_khz(tsc_khz, tsc_tolerance_ppm);
        if (user_tsc_khz < thresh_lo || user_tsc_khz > thresh_hi) {
                pr_debug("kvm: requested TSC rate %u falls outside tolerance [%u,%u]\n", user_tsc_khz, thresh_lo, thresh_hi);
                use_scaling = 1;
        }

NTP daemon in the guest can correct this difference (NTP can correct upto 500ppm).

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20200616114741.GA298183@fuller.cnet>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: X86: Fix MSR range of APIC registers in X2APIC mode

Only MSR address range 0x800 through 0x8ff is architecturally reserved
and dedicated for accessing APIC registers in x2APIC mode.

Fixes: 0105d1a52640 ("KVM: x2apic interface to lapic")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200616073307.16440-1-xiaoyao.li@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: VMX: Stop context switching MSR_IA32_UMWAIT_CONTROL

Remove support for context switching between the guest's and host's
desired UMWAIT_CONTROL.  Propagating the guest's value to hardware isn't
required for correct functionality, e.g. KVM intercepts reads and writes
to the MSR, and the latency effects of the settings controlled by the
MSR are not architecturally visible.

As a general rule, KVM should not allow the guest to control power
management settings unless explicitly enabled by userspace, e.g. see
KVM_CAP_X86_DISABLE_EXITS.  E.g. Intel's SDM explicitly states that C0.2
can improve the performance of SMT siblings.  A devious guest could
disable C0.2 so as to improve the performance of their workloads at the
detriment to workloads running in the host or on other VMs.

Wholesale removal of UMWAIT_CONTROL context switching also fixes a race
condition where updates from the host may cause KVM to enter the guest
with the incorrect value.  Because updates are are propagated to all
CPUs via IPI (SMP function callback), the value in hardware may be
stale with respect to the cached value and KVM could enter the guest
with the wrong value in hardware.  As above, the guest can't observe the
bad value, but it's a weird and confusing wart in the implementation.

Removal also fixes the unnecessary usage of VMX's atomic load/store MSR
lists.  Using the lists is only necessary for MSRs that are required for
correct functionality immediately upon VM-Enter/VM-Exit, e.g. EFER on
old hardware, or for MSRs that need to-the-uop precision, e.g. perf
related MSRs.  For UMWAIT_CONTROL, the effects are only visible in the
kernel via TPAUSE/delay(), and KVM doesn't do any form of delay in
vcpu_vmx_run().  Using the atomic lists is undesirable as they are more
expensive than direct RDMSR/WRMSR.

Furthermore, even if giving the guest control of the MSR is legitimate,
e.g. in pass-through scenarios, it's not clear that the benefits would
outweigh the overhead.  E.g. saving and restoring an MSR across a VMX
roundtrip costs ~250 cycles, and if the guest diverged from the host
that cost would be paid on every run of the guest.  In other words, if
there is a legitimate use case then it should be enabled by a new
per-VM capability.

Note, KVM still needs to emulate MSR_IA32_UMWAIT_CONTROL so that it can
correctly expose other WAITPKG features to the guest, e.g. TPAUSE,
UMWAIT and UMONITOR.

Fixes: 6e3ba4abcea56 ("KVM: vmx: Emulate MSR IA32_UMWAIT_CONTROL")
Cc: stable@vger.kernel.org
Cc: Jingqi Liu <jingqi.liu@intel.com>
Cc: Tao Xu <tao3.xu@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200623005135.10414-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: nVMX: Plumb L2 GPA through to PML emulation

Explicitly pass the L2 GPA to kvm_arch_write_log_dirty(), which for all
intents and purposes is vmx_write_pml_buffer(), instead of having the
latter pull the GPA from vmcs.GUEST_PHYSICAL_ADDRESS. If the dirty bit
update is the result of KVM emulation (rare for L2), then the GPA in the
VMCS may be stale and/or hold a completely unrelated GPA.

Fixes: c5f983f6e8455 ("nVMX: Implement emulated Page Modification Logging")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622215832.22090-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86/mmu: Avoid mixing gpa_t with gfn_t in walk_addr_generic()

translate_gpa() returns a GPA, assigning it to 'real_gfn' seems obviously
wrong. There is no real issue because both 'gpa_t' and 'gfn_t' are u64 and
we don't use the value in 'real_gfn' as a GFN, we do

real_gfn = gpa_to_gfn(real_gfn);

instead. 'If you see a "buffalo" sign on an elephant's cage, do not trust
your eyes', but let's fix it for good.

No functional change intended.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200622151435.752560-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: LAPIC: ensure APIC map is up to date on concurrent update requests

The following race can cause lost map update events:

         cpu1                            cpu2

                                apic_map_dirty = true
  ------------------------------------------------------------
                                kvm_recalculate_apic_map:
                                     pass check
                                         mutex_lock(&kvm->arch.apic_map_lock);
                                         if (!kvm->arch.apic_map_dirty)
                                     and in process of updating map
  -------------------------------------------------------------
    other calls to
       apic_map_dirty = true         might be too late for affected cpu
  -------------------------------------------------------------
                                     apic_map_dirty = false
  -------------------------------------------------------------
    kvm_recalculate_apic_map:
    bail out on
      if (!kvm->arch.apic_map_dirty)

To fix it, record the beginning of an update of the APIC map in
apic_map_dirty.  If another APIC map change switches apic_map_dirty
back to DIRTY during the update, kvm_recalculate_apic_map should not
make it CLEAN, and the other caller will go through the slow path.

Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'spi-fix-v5.8-rc2' of git://git./linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
"Quite a lot of fixes here for no single reason.

  There's a collection of the usual sort of device specific fixes and
  also a bunch of people have been working on spidev and the userspace
  test program spidev_test so they've got an unusually large collection
  of small fixes"

* tag 'spi-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spidev: fix a potential use-after-free in spidev_release()
  spi: spidev: fix a race between spidev_release and spidev_remove
  spi: stm32-qspi: Fix error path in case of -EPROBE_DEFER
  spi: uapi: spidev: Use TABs for alignment
  spi: spi-fsl-dspi: Free DMA memory with matching function
  spi: tools: Add macro definitions to fix build errors
  spi: tools: Make default_tx/rx and input_tx static
  spi: dt-bindings: amlogic, meson-gx-spicc: Fix schema for meson-g12a
  spi: rspi: Use requested instead of maximum bit rate
  spi: spidev_test: Use %u to format unsigned numbers
  spi: sprd: switch the sequence of setting WDG_LOAD_LOW and _HIGH

kvm: lapic: fix broken vcpu hotplug

Guest fails to online hotplugged CPU with error
smpboot: do_boot_cpu failed(-1) to wakeup CPU#4

It's caused by the fact that kvm_apic_set_state(), which used to call
recalculate_apic_map() unconditionally and pulled hotplugged CPU into
apic map, is updating map conditionally on state changes. In this case
the APIC map is not considered dirty and the is not updated.

Fix the issue by forcing unconditional update from kvm_apic_set_state(),
like it used to be.

Fixes: 4abaffce4d25a ("KVM: LAPIC: Recalculate apic map in batch")
Cc: stable@vger.kernel.org
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200622160830.426022-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'regulator-fix-v5.8-rc2' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
"This has a fix for the refactoring out of the pickable ranges
  functionality, plus the removal of a BROKEN dependency on mt6358 now
  that the dependencies were merged in -rc1 and a couple of device
  specific fixes"

* tag 'regulator-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: mt6358: Remove BROKEN dependency
  regualtor: pfuze100: correct sw1a/sw2 on pfuze3000
  regulator: Fix pickable ranges mapping
  regulator: da9063: fix LDO9 suspend and warning.

Merge tag 'regmap-fix-v5.8-rc2' of git://git./linux/kernel/git/broonie/regmap

Pull regmap fixes from Mark Brown:
"A few small fixes, none of which are likely to have any substantial
  impact here - the most substantial one is a fix for a long standing
  memory leak on devices that use register patching which will only have
  an impact if the device is removed and re-added"

* tag 'regmap-fix-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Fix memory leak from regmap_register_patch
  regmap: fix the kerneldoc for regmap_test_bits()
  regmap: fix alignment issue

tools/virtio: Use tools/include/list.h instead of stubs

It should not make any significant difference but reduce stub code.

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20200418102217.32327-9-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tools/virtio: Reset index in virtio_test --reset.

This way behavior for vhost is more like a VM.

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20200418102217.32327-8-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tools/virtio: Extract virtqueue initialization in vq_reset

So we can reset after that in the main loop.

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20200418102217.32327-7-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tools/virtio: Use __vring_new_virtqueue in virtio_test.c

As updated in ("2a2d1382fe9d virtio: Add improved queue allocation API")

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20200418102217.32327-6-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tools/virtio: Add --reset

Currently, it only removes and add backend, but it will reset vq
position in future commits.

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20200418102217.32327-5-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tools/virtio: Add --batch=random option

So we can test with non-deterministic batches in flight.

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20200418102217.32327-4-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

tools/virtio: Add --batch option

This allow to test vhost having >1 buffers in flight

Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20200401183118.8334-5-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20200418102217.32327-3-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

virtio-mem: add memory via add_memory_driver_managed()

Virtio-mem managed memory is always detected and added by the virtio-mem
driver, never using something like the firmware-provided memory map.
This is the case after an ordinary system reboot, and has to be guaranteed
after kexec. Especially, virtio-mem added memory resources can contain
inaccessible parts ("unblocked memory blocks"), blindly forwarding them
to a kexec kernel is dangerous, as unplugged memory will get accessed
(esp. written).

Let's use the new way of adding special driver-managed memory introduced
in commit 7b7b27214bba ("mm/memory_hotplug: introduce
add_memory_driver_managed()").

This will result in no entries in /sys/firmware/memmap ("raw firmware-
provided memory map"), the memory resource will be flagged
IORESOURCE_MEM_DRIVER_MANAGED (esp., kexec_file_load() will not place
kexec images on this memory), and it is exposed as "System RAM
(virtio_mem)" in /proc/iomem, so esp. kexec-tools can properly handle it.

Example /proc/iomem before this change:
  [...]
  140000000-333ffffff : virtio0
    140000000-147ffffff : System RAM
  334000000-533ffffff : virtio1
    338000000-33fffffff : System RAM
    340000000-347ffffff : System RAM
    348000000-34fffffff : System RAM
  [...]

Example /proc/iomem after this change:
  [...]
  140000000-333ffffff : virtio0
    140000000-147ffffff : System RAM (virtio_mem)
  334000000-533ffffff : virtio1
    338000000-33fffffff : System RAM (virtio_mem)
    340000000-347ffffff : System RAM (virtio_mem)
    348000000-34fffffff : System RAM (virtio_mem)
  [...]

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Fixes: 5f1f79bbc9e26 ("virtio-mem: Paravirtualized memory hotplug")
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200611093518.5737-1-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>

virtio-mem: silence a static checker warning

Smatch complains that "rc" can be uninitialized if we hit the "break;"
statement on the first iteration through the loop. I suspect that this
can't happen in real life, but returning a zero literal is cleaner and
silence the static checker warning.

Fixes: 5f1f79bbc9e2 ("virtio-mem: Paravirtualized memory hotplug")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200610085911.GC5439@mwanda
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vhost_vdpa: Fix potential underflow in vhost_vdpa_mmap()

The "vma->vm_pgoff" variable is an unsigned long so if it's larger than
INT_MAX then "index" can be negative leading to an underflow. Fix this
by changing the type of "index" to "unsigned long".

Fixes: ddd89d0a059d ("vhost_vdpa: support doorbell mapping via mmap")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200610085852.GB5439@mwanda
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vdpa: fix typos in the comments for __vdpa_alloc_device()

Fix two typos in the comments for __vdpa_alloc_device().

Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200527060528.9100-1-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Merge tag 'asoc-fix-v5.8-rc2' of https://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.8

This is a collection of mostly small fixes, mostly fixing fallout from
some of the DPCM changes that went in last time around which shook out
some issues on i.MX and Qualcomm platforms. The addition of a managed
version of snd_soc_register_dai() is to fix resource leaks.

There's also a few new device IDs for x86 systems.

Revert "kernel/printk: add kmsg SEEK_CUR handling"

This reverts commit 8ece3b3eb576a78d2e67ad4c3a80a39fa6708809.

This commit broke userspace. Bash uses ESPIPE to determine whether or
not the file should be read using "unbuffered I/O", which means reading
1 byte at a time instead of 128 bytes at a time. I used to use bash to
read through kmsg in a really quite nasty way:

    while read -t 0.1 -r line 2>/dev/null || [[ $? -ne 142 ]]; do
       echo "SARU $line"
    done < /dev/kmsg

This will show all lines that can fit into the 128 byte buffer, and skip
lines that don't. That's pretty awful, but at least it worked.

With this change, bash now tries to do 1-byte reads, which means it
skips all the lines, which is worse than before.

Now, I don't really care very much about this, and I'm already look for
a workaround. But I did just spend an hour trying to figure out why my
scripts were broken. Either way, it makes no difference to me personally
whether this is reverted, but it might be something to consider. If you
declare that "trying to read /dev/kmsg with bash is terminally stupid
anyway," I might be inclined to agree with you. But do note that bash
uses lseek(fd, 0, SEEK_CUR)==>ESPIPE to determine whether or not it's
reading from a pipe.

Cc: Bruno Meneguele <bmeneg@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Linux 5.8-rc2

Merge tag 'selinux-pr-20200621' of git://git./linux/kernel/git/pcmoore/selinux

Pull SELinux fixes from Paul Moore:
"Three small patches to fix problems in the SELinux code, all found via
  clang.

  Two patches fix potential double-free conditions and one fixes an
  undefined return value"

* tag 'selinux-pr-20200621' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: fix undefined return of cond_evaluate_expr
  selinux: fix a double free in cond_read_node()/cond_read_list()
  selinux: fix double free

Merge tag 'pinctrl-v5.8-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
"Some early fixes collected during the first week after the merge
  window, all pretty self-evident, with the details below. The revert is
  the crucial thing.

   - Fix a warning on the Qualcomm SPMI GPIO chip being instatiated
     twice without a unique irqchip struct

   - Use the noirq variants of the suspend and resume callbacks in the
     Tegra driver

   - Clean up the errorpath on the MCP23s08 driver

   - Revert the use of devm_of_iomap() in the Freescale driver as it was
     regressing the platform

   - Add some missing pins in the Qualcomm IPQ6018 driver

   - Fix a simple documentation bug in the pinctrl-single driver"

* tag 'pinctrl-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: single: fix function name in documentation
  pinctrl: qcom: ipq6018 Add missing pins in qpic pin group
  Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'"
  pinctrl: mcp23s08: Split to three parts: fix ptr_ret.cocci warnings
  pinctrl: tegra: Use noirq suspend/resume callbacks
  pinctrl: qcom: spmi-gpio: fix warning about irq chip reusage

Merge tag 'kbuild-fixes-v5.8' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

- fix -gz=zlib compiler option test for CONFIG_DEBUG_INFO_COMPRESSED

- improve cc-option in scripts/Kbuild.include to clean up temp files

- improve cc-option in scripts/Kconfig.include for more reliable
   compile option test

- do not copy modules.builtin by 'make install' because it would break
   existing systems

- use 'userprogs' syntax for watch_queue sample

* tag 'kbuild-fixes-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  samples: watch_queue: build sample program for target architecture
  Revert "Makefile: install modules.builtin even if CONFIG_MODULES=n"
  scripts: Fix typo in headers_install.sh
  kconfig: unify cc-option and as-option
  kbuild: improve cc-option to clean up all temporary files
  Makefile: Improve compressed debug info support detection

Merge tag 'powerpc-5.8-3' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- One fix for the interrupt rework we did last release which broke
   KVM-PR

- Three commits fixing some fallout from the READ_ONCE() changes
   interacting badly with our 8xx 16K pages support, which uses a pte_t
   that is a structure of 4 actual PTEs

- A cleanup of the 8xx pte_update() to use the newly added pmd_off()

- A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is
   enabled

- A minor fix for the SPU syscall generation

Thanks to Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike
Rapoport, Nicholas Piggin.

* tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/8xx: Provide ptep_get() with 16k pages
  mm: Allow arches to provide ptep_get()
  mm/gup: Use huge_ptep_get() in gup_hugepte()
  powerpc/syscalls: Use the number when building SPU syscall table
  powerpc/8xx: use pmd_off() to access a PMD entry in pte_update()
  powerpc/64s: Fix KVM interrupt using wrong save area
  powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUAL

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:

- NULL dereference in octeontx

- PM reference imbalance in ks-sa

- deadlock in crypto manager

- memory leak in drbg

- missing socket limit check on receive SG list size in algif_skcipher

- typos in caam

- warnings in ccp and hisilicon

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: drbg - always try to free Jitter RNG instance
  crypto: marvell/octeontx - Fix a potential NULL dereference
  crypto: algboss - don't wait during notifier callback
  crypto: caam - fix typos
  crypto: ccp - Fix sparse warnings in sev-dev
  crypto: hisilicon - Cap block size at 2^31
  crypto: algif_skcipher - Cap recv SG list at ctx->used
  hwrng: ks-sa - Fix runtime PM imbalance on error

samples: watch_queue: build sample program for target architecture

This userspace program includes UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample program should be built for
the target as well. Kbuild now supports 'userprogs' for that.

I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because
$(CC) may not provide libc.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Revert "Makefile: install modules.builtin even if CONFIG_MODULES=n"

This reverts commit e0b250b57dcf403529081e5898a9de717f96b76b,
which broke build systems that need to install files to a certain
path, but do not set INSTALL_MOD_PATH when invoking 'make install'.

  $ make INSTALL_PATH=/tmp/destdir install
  mkdir: cannot create directory ‘/lib/modules/5.8.0-rc1+/’: Permission denied
  Makefile:1342: recipe for target '_builtin_inst_' failed
  make: *** [_builtin_inst_] Error 1

While modules.builtin is useful also for CONFIG_MODULES=n, this change
in the behavior is quite unexpected. Maybe "make modules_install"
can install modules.builtin irrespective of CONFIG_MODULES as Jonas
originally suggested.

Anyway, that commit should be reverted ASAP.

Reported-by: Douglas Anderson <dianders@chromium.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"One minor fix and two patches reworking the ata dma drain for the
  !CONFIG_LIBATA case. The latter is a 5.7 regression fix"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers
  scsi: libata: Provide an ata_scsi_dma_need_drain stub for !CONFIG_ATA
  scsi: ufs-bsg: Fix runtime PM imbalance on error

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:

- a small collection of remaining API conversion patches (all acked)
   which allow to finally remove the deprecated API

- some documentation fixes and a MAINTAINERS addition

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: Add robert and myself as qcom i2c cci maintainers
  i2c: smbus: Fix spelling mistake in the comments
  Documentation/i2c: SMBus start signal is S not A
  i2c: remove deprecated i2c_new_device API
  Documentation: media: convert to use i2c_new_client_device()
  video: backlight: tosa_lcd: convert to use i2c_new_client_device()
  x86/platform/intel-mid: convert to use i2c_new_client_device()
  drm: encoder_slave: use new I2C API
  drm: encoder_slave: fix refcouting error for modules

pinctrl: single: fix function name in documentation

Use the correct the function name in the documentation for
"pcs_parse_one_pinctrl_entry()".

"smux_parse_one_pinctrl_entry()" appears to be an artifact from the
development of a prior patch series ("simple pinmux driver") which
transformed into pinctrl-single.

Signed-off-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20200612112758.GA3407886@x1
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'trace-v5.8-rc1' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:

- Have recordmcount work with > 64K sections (to support LTO)

- kprobe RCU fixes

- Correct a kprobe critical section with missing mutex

- Remove redundant arch_disarm_kprobe() call

- Fix lockup when kretprobe triggers within kprobe_flush_task()

- Fix memory leak in fetch_op_data operations

- Fix sleep in atomic in ftrace trace array sample code

- Free up memory on failure in sample trace array code

- Fix incorrect reporting of function_graph fields in format file

- Fix quote within quote parsing in bootconfig

- Fix return value of bootconfig tool

- Add testcases for bootconfig tool

- Fix maybe uninitialized warning in ftrace pid file code

- Remove unused variable in tracing_iter_reset()

- Fix some typos

* tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix maybe-uninitialized compiler warning
  tools/bootconfig: Add testcase for show-command and quotes test
  tools/bootconfig: Fix to return 0 if succeeded to show the bootconfig
  tools/bootconfig: Fix to use correct quotes for value
  proc/bootconfig: Fix to use correct quotes for value
  tracing: Remove unused event variable in tracing_iter_reset
  tracing/probe: Fix memleak in fetch_op_data operations
  trace: Fix typo in allocate_ftrace_ops()'s comment
  tracing: Make ftrace packed events have align of 1
  sample-trace-array: Remove trace_array 'sample-instance'
  sample-trace-array: Fix sleeping function called from invalid context
  kretprobe: Prevent triggering kretprobe from within kprobe_flush_task
  kprobes: Remove redundant arch_disarm_kprobe() call
  kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex
  kprobes: Use non RCU traversal APIs on kprobe_tables if possible
  kprobes: Suppress the suspicious RCU warning on kprobes
  recordmcount: support >64k sections

Merge tag 'libnvdimm-for-5.8-rc2' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
"A feature (papr_scm health retrieval) and a fix (sysfs attribute
  visibility) for v5.8.

  Vaibhav explains in the merge commit below why missing v5.8 would be
  painful and I agreed to try a -rc2 pull because only cosmetics kept
  this out of -rc1 and his initial versions were posted in more than
  enough time for v5.8 consideration:

   'These patches are tied to specific features that were committed to
    customers in upcoming distros releases (RHEL and SLES) whose
    time-lines are tied to 5.8 kernel release.

    Being able to track the health of an nvdimm is critical for our
    customers that are running workloads leveraging papr-scm nvdimms.
    Missing the 5.8 kernel would mean missing the distro timelines and
    shifting forward the availability of this feature in distro kernels
    by at least 6 months'

  Summary:

   - Fix the visibility of the region 'align' attribute.

     The new unit tests for region alignment handling caught a corner
     case where the alignment cannot be specified if the region is
     converted from static to dynamic provisioning at runtime.

   - Add support for device health retrieval for the persistent memory
     supported by the papr_scm driver.

     This includes both the standard sysfs "health flags" that the nfit
     persistent memory driver publishes and a mechanism for the ndctl
     tool to retrieve a health-command payload"

* tag 'libnvdimm-for-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nvdimm/region: always show the 'align' attribute
  powerpc/papr_scm: Implement support for PAPR_PDSM_HEALTH
  ndctl/papr_scm,uapi: Add support for PAPR nvdimm specific methods
  powerpc/papr_scm: Improve error logging and handling papr_scm_ndctl()
  powerpc/papr_scm: Fetch nvdimm health information from PHYP
  seq_buf: Export seq_buf_printf
  powerpc: Document details on H_SCM_HEALTH hcall

pinctrl: qcom: ipq6018 Add missing pins in qpic pin group

The patch adds missing qpic data pins to qpic pingroup. These pins are
necessary for the qpic nand to work.

Fixes: ef1ea54eab0e ("pinctrl: qcom: Add ipq6018 pinctrl driver")
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1592541089-17700-1-git-send-email-sivaprak@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'"

This reverts commit ba403242615c2c99e27af7984b1650771a2cc2c9.

After commit 26d8cde5260b ("pinctrl: freescale: imx: add shared
input select reg support"). i.MX7D has two iomux controllers
iomuxc and iomuxc-lpsr which share select_input register for
daisy chain settings.
If use 'devm_of_iomap()', when probe the iomuxc-lpsr, will call
devm_request_mem_region() for the region <0x30330000-0x3033ffff>
for the first time. Then, next time when probe the iomuxc, API
devm_platform_ioremap_resource() will also use the API
devm_request_mem_region() for the share region <0x30330000-0x3033ffff>
again, then cause issue, log like below:

[    0.179561] imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver
[    0.191742] imx7d-pinctrl 30330000.pinctrl: can't request region for resource [mem 0x30330000-0x3033ffff]
[    0.191842] imx7d-pinctrl: probe of 30330000.pinctrl failed with error -16

Fixes: ba403242615c ("pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/1591673223-1680-1-git-send-email-haibo.chen@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 's390-5.8-2' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:

- a few ptrace fixes mostly for strace and seccomp_bpf kernel tests
   findings

- cleanup unused pm callbacks in virtio ccw

- replace kmalloc + memset with kzalloc in crypto

- use $(LD) for vDSO linkage to make clang happy

- fix vDSO clock_getres() to preserve the same behaviour as
   posix_get_hrtimer_res()

- fix workqueue cpumask warning when NUMA=n and nr_node_ids=2

- reduce SLSB writes during input processing, improve warnings and
   cleanup qdio_data usage in qdio

- a few fixes to use scnprintf() instead of snprintf()

* tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: fix syscall_get_error for compat processes
  s390/qdio: warn about unexpected SLSB states
  s390/qdio: clean up usage of qdio_data
  s390/numa: let NODES_SHIFT depend on NEED_MULTIPLE_NODES
  s390/vdso: fix vDSO clock_getres()
  s390/vdso: Use $(LD) instead of $(CC) to link vDSO
  s390/protvirt: use scnprintf() instead of snprintf()
  s390: use scnprintf() in sys_##_prefix##_##_name##_show
  s390/crypto: use scnprintf() instead of snprintf()
  s390/zcrypt: use kzalloc
  s390/virtio: remove unused pm callbacks
  s390/qdio: reduce SLSB writes during Input Queue processing
  selftests/seccomp: s390 shares the syscall and return value register
  s390/ptrace: fix setting syscall number
  s390/ptrace: pass invalid syscall numbers to tracing
  s390/ptrace: return -ENOSYS when invalid syscall is supplied
  s390/seccomp: pass syscall arguments via seccomp_data
  s390/qdio: fine-tune SLSB update

Merge tag 'riscv-for-linus-5.8-rc2' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

- a workaround for a compiler surprise related to the "r" inline
   assembly that allows LLVM to boot.

- a fix to avoid WX-only mappings, which the ISA does not allow. While
   this probably manifests in many ways, the bug was found in stress-ng.

- a missing lock in set_direct_map_*(), which due to a recent lockdep
   change started asserting.

* tag 'riscv-for-linus-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Acquire mmap lock before invoking walk_page_range
  RISC-V: Don't allow write+exec only page mapping request in mmap
  riscv/atomic: Fix sign extension for RV64I

Merge tag 'linux-kselftest-5.8-rc2' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull kselftest cleanups from Shuah Khan:

- ftrace "requires:" list for simplifying and unifying requirement
   checks for each test case, adding "requires:" line instead of
   checking required ftrace interfaces in each test case.

- a minor spelling correction patch

* tag 'linux-kselftest-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/ftrace: Support ":README" suffix for requires
  selftests/ftrace: Support ":tracer" suffix for requires
  selftests/ftrace: Convert check_filter_file() with requires list
  selftests/ftrace: Convert required interface checks into requires list
  selftests/ftrace: Add "requires:" list support
  selftests/ftrace: Return unsupported for the unconfigured features
  selftests/ftrace: Allow ":" in description
  tools: testing: ftrace: trigger: fix spelling mistake

afs: Fix hang on rmmod due to outstanding timer

The fileserver probe timer, net->fs_probe_timer, isn't cancelled when
the kafs module is being removed and so the count it holds on
net->servers_outstanding doesn't get dropped..

This causes rmmod to wait forever.  The hung process shows a stack like:

afs_purge_servers+0x1b5/0x23c [kafs]
afs_net_exit+0x44/0x6e [kafs]
ops_exit_list+0x72/0x93
unregister_pernet_operations+0x14c/0x1ba
unregister_pernet_subsys+0x1d/0x2a
afs_exit+0x29/0x6f [kafs]
__do_sys_delete_module.isra.0+0x1a2/0x24b
do_syscall_64+0x51/0x95
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by:

(1) Attempting to cancel the probe timer and, if successful, drop the
     count that the timer was holding.

(2) Make the timer function just drop the count and not schedule the
     prober if the afs portion of net namespace is being destroyed.

Also, whilst we're at it, make the following changes:

(3) Initialise net->servers_outstanding to 1 and decrement it before
     waiting on it so that it doesn't generate wake up events by being
     decremented to 0 until we're cleaning up.

(4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in
     afs_purge_servers() to use the helper function for that.

Fixes: f6cbb368bcb0 ("afs: Actively poll fileservers to maintain NAT or firewall openings")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

afs: Fix afs_do_lookup() to call correct fetch-status op variant

Fix afs_do_lookup()'s fallback case for when FS.InlineBulkStatus isn't
supported by the server.

In the fallback, it calls FS.FetchStatus for the specific vnode it's
meant to be looking up.  Commit b6489a49f7b7 broke this by renaming one
of the two identically-named afs_fetch_status_operation descriptors to
something else so that one of them could be made non-static.  The site
that used the renamed one, however, wasn't renamed and didn't produce
any warning because the other was declared in a header.

Fix this by making afs_do_lookup() use the renamed variant.

Note that there are two variants of the success method because one is
called from ->lookup() where we may or may not have an inode, but can't
call iget until after we've talked to the server - whereas the other is
called from within iget where we have an inode, but it may or may not be
initialised.

The latter variant expects there to be an inode, but because it's being
called from there former case, there might not be - resulting in an oops
like the following:

  BUG: kernel NULL pointer dereference, address: 00000000000000b0
  ...
  RIP: 0010:afs_fetch_status_success+0x27/0x7e
  ...
  Call Trace:
    afs_wait_for_operation+0xda/0x234
    afs_do_lookup+0x2fe/0x3c1
    afs_lookup+0x3c5/0x4bd
    __lookup_slow+0xcd/0x10f
    walk_component+0xa2/0x10c
    path_lookupat.isra.0+0x80/0x110
    filename_lookup+0x81/0x104
    vfs_statx+0x76/0x109
    __do_sys_newlstat+0x39/0x6b
    do_syscall_64+0x4c/0x78
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: b6489a49f7b7 ("afs: Fix silly rename")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc/8xx: Provide ptep_get() with 16k pages

READ_ONCE() now enforces atomic read, which leads to:

  CC      mm/gup.o
In file included from ./include/linux/kernel.h:11:0,
                 from mm/gup.c:2:
In function 'gup_hugepte.constprop',
    inlined from 'gup_huge_pd.isra.79' at mm/gup.c:2465:8:
./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_222' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE().
  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
                                      ^
./include/linux/compiler.h:373:4: note: in definition of macro '__compiletime_assert'
    prefix ## suffix();    \
    ^
./include/linux/compiler.h:392:2: note: in expansion of macro '_compiletime_assert'
  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
  ^
./include/linux/compiler.h:405:2: note: in expansion of macro 'compiletime_assert'
  compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
  ^
./include/linux/compiler.h:291:2: note: in expansion of macro 'compiletime_assert_rwonce_type'
  compiletime_assert_rwonce_type(x);    \
  ^
mm/gup.c:2428:8: note: in expansion of macro 'READ_ONCE'
  pte = READ_ONCE(*ptep);
        ^
In function 'gup_get_pte',
    inlined from 'gup_pte_range' at mm/gup.c:2228:9,
    inlined from 'gup_pmd_range' at mm/gup.c:2613:15,
    inlined from 'gup_pud_range' at mm/gup.c:2641:15,
    inlined from 'gup_p4d_range' at mm/gup.c:2666:15,
    inlined from 'gup_pgd_range' at mm/gup.c:2694:15,
    inlined from 'internal_get_user_pages_fast' at mm/gup.c:2795:3:
./include/linux/compiler.h:392:38: error: call to '__compiletime_assert_219' declared with attribute error: Unsupported access size for {READ,WRITE}_ONCE().
  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
                                      ^
./include/linux/compiler.h:373:4: note: in definition of macro '__compiletime_assert'
    prefix ## suffix();    \
    ^
./include/linux/compiler.h:392:2: note: in expansion of macro '_compiletime_assert'
  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
  ^
./include/linux/compiler.h:405:2: note: in expansion of macro 'compiletime_assert'
  compiletime_assert(__native_word(t) || sizeof(t) == sizeof(long long), \
  ^
./include/linux/compiler.h:291:2: note: in expansion of macro 'compiletime_assert_rwonce_type'
  compiletime_assert_rwonce_type(x);    \
  ^
mm/gup.c:2199:9: note: in expansion of macro 'READ_ONCE'
  return READ_ONCE(*ptep);
         ^
make[2]: *** [mm/gup.o] Error 1

Define ptep_get() on 8xx when using 16k pages.

Fixes: 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/341688399c1b102756046d19ea6ce39db1ae4742.1592225558.git.christophe.leroy@csgroup.eu

mm: Allow arches to provide ptep_get()

Since commit 9e343b467c70 ("READ_ONCE: Enforce atomicity for
{READ,WRITE}_ONCE() memory accesses") it is not possible anymore to
use READ_ONCE() to access complex page table entries like the one
defined for powerpc 8xx with 16k size pages.

Define a ptep_get() helper that architectures can override instead
of performing a READ_ONCE() on the page table entry pointer.

Fixes: 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/087fa12b6e920e32315136b998aa834f99242695.1592225558.git.christophe.leroy@csgroup.eu

mm/gup: Use huge_ptep_get() in gup_hugepte()

gup_hugepte() reads hugepage table entries, it can't read
them directly, huge_ptep_get() must be used.

Fixes: 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ffc3714334c3bfaca6f13788ad039e8759ae413f.1592225558.git.christophe.leroy@csgroup.eu

Merge branch 'for-5.8/papr_scm' into libnvdimm-for-next

Include the papr_scm health retrieval feature for v5.8-rc2. The
functionality was initially posted well in advance of the merge window,
but review comments and a late build-bot warning kept them out of the
v5.8-rc1 libnvdimm pull request.

Vaibhav notes:
These patches are tied to specific features that were committed to
customers in upcoming distros releases (RHEL and SLES) whose time-lines
are tied to 5.8 kernel release.

Being able to track the health of an nvdimm is critical for our
customers that are running workloads leveraging papr-scm nvdimms.
Missing the 5.8 kernel would mean missing the distro timelines and
shifting forward the availability of this feature in distro kernels by
at least 6 months.

Merge tag 'io_uring-5.8-2020-06-19' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:

- Catch a case where io_sq_thread() didn't do proper mm acquire

- Ensure poll completions are reaped on shutdown

- Async cancelation and run fixes (Pavel)

- io-poll race fixes (Xiaoguang)

- Request cleanup race fix (Xiaoguang)

* tag 'io_uring-5.8-2020-06-19' of git://git.kernel.dk/linux-block:
  io_uring: fix possible race condition against REQ_F_NEED_CLEANUP
  io_uring: reap poll completions while waiting for refs to drop on exit
  io_uring: acquire 'mm' for task_work for SQPOLL
  io_uring: add memory barrier to synchronize io_kiocb's result and iopoll_completed
  io_uring: don't fail links for EAGAIN error in IOPOLL mode
  io_uring: cancel by ->task not pid
  io_uring: lazy get task
  io_uring: batch cancel in io_uring_cancel_files()
  io_uring: cancel all task's requests on exit
  io-wq: add an option to cancel all matched reqs
  io-wq: reorder cancellation pending -> running
  io_uring: fix lazy work init

Merge tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- Use import_uuid() where appropriate (Andy)

- bcache fixes (Coly, Mauricio, Zhiqiang)

- blktrace sparse warnings fix (Jan)

- blktrace concurrent setup fix (Luis)

- blkdev_get use-after-free fix (Jason)

- Ensure all blk-mq maps are updated (Weiping)

- Loop invalidate bdev fix (Zheng)

* tag 'block-5.8-2020-06-19' of git://git.kernel.dk/linux-block:
  block: make function 'kill_bdev' static
  loop: replace kill_bdev with invalidate_bdev
  partitions/ldm: Replace uuid_copy() with import_uuid() where it makes sense
  block: update hctx map when use multiple maps
  blktrace: Avoid sparse warnings when assigning q->blk_trace
  blktrace: break out of blktrace setup on concurrent calls
  block: Fix use-after-free in blkdev_get()
  trace/events/block.h: drop kernel-doc for dropped function parameter
  blk-mq: Remove redundant 'return' statement
  bcache: pr_info() format clean up in bcache_device_init()
  bcache: use delayed kworker fo asynchronous devices registration
  bcache: check and adjust logical block size for backing devices
  bcache: fix potential deadlock problem in btree_gc_coalesce

Merge tag 'libata-5.8-2020-06-19' of git://git.kernel.dk/linux-block

Pull libata fixes from Jens Axboe:
"A few minor changes that should go into this release"

* tag 'libata-5.8-2020-06-19' of git://git.kernel.dk/linux-block:
  libata: Use per port sync for detach
  ata/libata: Fix usage of page address by page_address in ata_scsi_mode_select_xlat function
  sata_rcar: handle pm_runtime_get_sync failure cases

Merge tag 'drm-fixes-2020-06-19' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Just i915 and amd here.

  i915 has some workaround movement so they get applied at the right
  times, and a timeslicing fix, along with some display fixes.

  AMD has a few display floating point fix and a devcgroup fix for
  amdkfd.

  i915:
   - Fix for timeslicing and virtual engines/unpremptable requests (+ 1
     dependency patch)
   - Fixes into TypeC register programming and interrupt storm detecting
   - Disable DIP on MST ports with the transcoder clock still on
   - Avoid missing GT workarounds at reset for HSW and older gens
   - Fix for unwinding multiple requests missing force restore
   - Fix encoder type check for DDI vswing sequence
   - Build warning fixes

  amdgpu:
   - Fix kvfree/kfree mixup
   - Fix hawaii device id in powertune configuration
   - Display FP fixes
   - Documentation fixes

  amdkfd:
   - devcgroup check fix"

* tag 'drm-fixes-2020-06-19' of git://anongit.freedesktop.org/drm/drm: (23 commits)
  drm/amdgpu: fix documentation around busy_percentage
  drm/amdgpu/pm: update comment to clarify Overdrive interfaces
  drm/amdkfd: Use correct major in devcgroup check
  drm/i915/display: Fix the encoder type check
  drm/i915/icl+: Fix hotplug interrupt disabling after storm detection
  drm/i915/gt: Move gen4 GT workarounds from init_clock_gating to workarounds
  drm/i915/gt: Move ilk GT workarounds from init_clock_gating to workarounds
  drm/i915/gt: Move snb GT workarounds from init_clock_gating to workarounds
  drm/i915/gt: Move vlv GT workarounds from init_clock_gating to workarounds
  drm/i915/gt: Move ivb GT workarounds from init_clock_gating to workarounds
  drm/i915/gt: Move hsw GT workarounds from init_clock_gating to workarounds
  drm/i915/icl: Disable DIP on MST ports with the transcoder clock still on
  drm/i915/gt: Incrementally check for rewinding
  drm/i915/tc: fix the reset of ln0
  drm/i915/gt: Prevent timeslicing into unpreemptable requests
  drm/i915/selftests: Restore to default heartbeat
  drm/i915: work around false-positive maybe-uninitialized warning
  drm/i915/pmu: avoid an maybe-uninitialized warning
  drm/i915/gt: Incorporate the virtual engine into timeslicing
  drm/amd/display: Rework dsc to isolate FPU operations
  ...

Merge tag 'ceph-for-5.8-rc2' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
"An important follow-up for replica reads support that went into -rc1
  and two target_copy() fixups"

* tag 'ceph-for-5.8-rc2' of git://github.com/ceph/ceph-client:
  libceph: don't omit used_replica in target_copy()
  libceph: don't omit recovery_deletes in target_copy()
  libceph: move away from global osd_req_flags

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
"Unfortunately, we still have a number of outstanding issues so there
  will be more fixes to come, but this lot are a good start.

   - Fix handling of watchpoints triggered by uaccess routines

   - Fix initialisation of gigantic pages for CMA buffers

   - Raise minimum clang version for BTI to avoid miscompilation

   - Fix data race in SVE vector length configuration code

   - Ensure address tags are ignored in kern_addr_valid()

   - Dump register state on fatal BTI exception

   - kexec_file() cleanup to use struct_size() macro"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: hw_breakpoint: Don't invoke overflow handler on uaccess watchpoints
  arm64: kexec_file: Use struct_size() in kmalloc()
  arm64: mm: reserve hugetlb CMA after numa_init
  arm64: bti: Require clang >= 10.0.1 for in-kernel BTI support
  arm64: sve: Fix build failure when ARM64_SVE=y and SYSCTL=n
  arm64: pgtable: Clear the GP bit for non-executable kernel pages
  arm64: mm: reset address tag set by kasan sw tagging
  arm64: traps: Dump registers prior to panic() in bad_mode()
  arm64/sve: Eliminate data races on sve_default_vl
  docs/arm64: Fix typo'd #define in sve.rst
  arm64: remove TEXT_OFFSET randomization

Merge tag 'overflow-v5.8-rc2' of git://git./linux/kernel/git/kees/linux

Pull flex-array size helper from Kees Cook:
"During the treewide clean-ups of zero-length "flexible arrays", the
  struct_size() helper was heavily used, but it was noticed that many
  times it would have been nice to have an additional helper to get the
  size of just the flexible array itself.

  This need appears to be even more common when cleaning up the 1-byte
  array "flexible arrays", so Gustavo implemented it.

  I'd love to get this landed early so it can be used during the v5.9
  dev cycle to ease the 1-byte array cleanups."

* tag 'overflow-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  overflow.h: Add flex_array_size() helper

Merge tag 'perf-tools-fixes-2020-06-02' of git://git./linux/kernel/git/acme/linux

Pull perf tooling fixes from Arnaldo Carvalho de Melo:

- Update various UAPI headers, some automatically adding support for a
   new MSR and the faccess2 syscall.

- Fix corner case NULL deref in the histograms code.

- Fix corner case NULL deref in 'perf stat' aggregation code.

- Fix array pointer deref and old style declaration in the parsing of
   events.

- Fix segfault when processing ZSTD compressed perf.data files in 'perf
   script' due to lack of initialization of the ZSTD library.

- Handle __attribute__((user)) in libtraceevent fixing the parsing of
   syscall tracepoints with user buffers.

- Make libtraevent aware of __builtin_expect() appearing in tracepoint
   fields.

- Make the BPF prologue generation use bpf_probe_read_{user,kernel}().

- Fix the '@user' attribute parsing in kprobes variables in 'perf
   probe'.

- Fix error message when asking for -fsanitize=address without required
   libraries.

* tag 'perf-tools-fixes-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (22 commits)
  perf build: Fix error message when asking for -fsanitize=address without required libraries
  tools lib traceevent: Add handler for __builtin_expect()
  tools lib traceevent: Handle __attribute__((user)) in field names
  tools lib traceevent: Add append() function helper for appending strings
  tools headers UAPI: Sync linux/fs.h with the kernel sources
  tools include UAPI: Sync linux/vhost.h with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  perf script: Initialize zstd_data
  perf pmu: Remove unused declaration
  perf parse-events: Fix an old style declaration
  perf parse-events: Fix an incompatible pointer
  perf bpf: Fix bpf prologue generation
  perf probe: Fix user attribute access in kprobes
  perf stat: Fix NULL pointer dereference
  perf report: Fix NULL pointer dereference in hists__fprintf_nr_sample_events()
  tools headers UAPI: Sync kvm.h headers with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
  perf beauty: Add support to STATX_MNT_ID in the 'statx' syscall 'mask' argument
  tools headers uapi: Sync linux/stat.h with the kernel sources
  ...

MAINTAINERS: Add robert and myself as qcom i2c cci maintainers

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
[wsa: kept sorting]
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Revert "KVM: VMX: Micro-optimize vmexit time when not exposing PMU"

Guest crashes are observed on a Cascade Lake system when 'perf top' is
launched on the host, e.g.

BUG: unable to handle kernel paging request at fffffe0000073038
PGD 7ffa7067 P4D 7ffa7067 PUD 7ffa6067 PMD 7ffa5067 PTE ffffffffff120
Oops: 0000 [#1] SMP PTI
CPU: 1 PID: 1 Comm: systemd Not tainted 4.18.0+ #380
...
Call Trace:
  serial8250_console_write+0xfe/0x1f0
  call_console_drivers.constprop.0+0x9d/0x120
  console_unlock+0x1ea/0x460

Call traces are different but the crash is imminent. The problem was
blindly bisected to the commit 041bc42ce2d0 ("KVM: VMX: Micro-optimize
vmexit time when not exposing PMU"). It was also confirmed that the
issue goes away if PMU is exposed to the guest.

With some instrumentation of the guest we can see what is being switched
(when we do atomic_switch_perf_msrs()):

vmx_vcpu_run: switching 2 msrs
vmx_vcpu_run: switching MSR38f guest: 70000000d host: 70000000f
vmx_vcpu_run: switching MSR3f1 guest: 0 host: 2

The current guess is that PEBS (MSR_IA32_PEBS_ENABLE, 0x3f1) is to blame.
Regardless of whether PMU is exposed to the guest or not, PEBS needs to
be disabled upon switch.

This reverts commit 041bc42ce2d0efac3b85bbb81dea8c74b81f4ef9.

Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200619094046.654019-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

i2c: smbus: Fix spelling mistake in the comments

Fix spelling mistake in the comments with help of `codespell`.
seperate ==> separate

Signed-off-by: Keyur Patel <iamkeyur96@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Documentation/i2c: SMBus start signal is S not A

Just like all other I2C/SMBus commands, the start signal for the SMBus
Quick Command is S, not A.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Daniel Schaefer <git@danielschaefer.me>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: remove deprecated i2c_new_device API

All in-tree users have been converted to the new i2c_new_client_device
function, so remove this deprecated one.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Documentation: media: convert to use i2c_new_client_device()

Move away from the deprecated API and advertise the new one.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>