Linus Torvalds [Fri, 13 Apr 2018 19:27:11 +0000 (12:27 -0700)]
Merge tag 'sh-for-4.17' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker:
"Fixes for bugs in futex, device tree, and userspace breakpoint traps,
and for PCI issues on SH7786"
* tag 'sh-for-4.17' of git://git.libc.org/linux-sh:
arch/sh: pcie-sh7786: handle non-zero DMA offset
arch/sh: pcie-sh7786: adjust the memory mapping
arch/sh: pcie-sh7786: adjust PCI MEM and IO regions
arch/sh: pcie-sh7786: exclude unusable PCI MEM areas
arch/sh: pcie-sh7786: mark unavailable PCI resource as disabled
arch/sh: pci: don't use disabled resources
arch/sh: make the DMA mapping operations observe dev->dma_pfn_offset
arch/sh: add sh7786_mm_sel() function
sh: fix debug trap failure to process signals before return to user
sh: fix memory corruption of unflattened device tree
sh: fix futex FUTEX_OP_SET op on userspace addresses
Linus Torvalds [Fri, 13 Apr 2018 18:24:18 +0000 (11:24 -0700)]
Merge tag 'arm64-upstream' of git://git./linux/kernel/git/arm64/linux
Pull more arm64 updates from Will Deacon:
"A few late updates to address some issues arising from conflicts with
other trees:
- Removal of Qualcomm-specific Spectre-v2 mitigation in favour of the
generic SMCCC-based firmware call
- Fix EL2 hardening capability checking, which was bodged to reduce
conflicts with the KVM tree
- Add some currently unused assembler macros for managing SIMD
registers which will be used by some crypto code in the next merge
window"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: assembler: add macros to conditionally yield the NEON under PREEMPT
arm64: assembler: add utility macros to push/pop stack frames
arm64: Move the content of bpi.S to hyp-entry.S
arm64: Get rid of __smccc_workaround_1_hvc_*
arm64: capabilities: Rework EL2 vector hardening entry
arm64: KVM: Use SMCCC_ARCH_WORKAROUND_1 for Falkor BP hardening
Linus Torvalds [Fri, 13 Apr 2018 16:43:20 +0000 (09:43 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull more s390 updates from Martin Schwidefsky:
"Three notable larger changes next to the usual bug fixing:
- update the email addresses in MAINTAINERS for the s390 folks to use
the simpler linux.ibm.com domain instead of the old
linux.vnet.ibm.com
- an update for the zcrypt device driver that removes some old and
obsolete interfaces and add support for up to 256 crypto adapters
- a rework of the IPL aka boot code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (23 commits)
s390: correct nospec auto detection init order
s390/zcrypt: Support up to 256 crypto adapters.
s390/zcrypt: Remove deprecated zcrypt proc interface.
s390/zcrypt: Remove deprecated ioctls.
s390/zcrypt: Make ap init functions static.
MAINTAINERS: update s390 maintainers email addresses
s390/ipl: remove reipl_method and dump_method
s390/ipl: correct kdump reipl block checksum calculation
s390/ipl: remove non-existing functions declaration
s390: assume diag308 set always works
s390/ipl: avoid adding scpdata to cmdline during ftp/dvd boot
s390/ipl: correct ipl parmblock valid checks
s390/ipl: rely on diag308 store to get ipl info
s390/ipl: move ipl_flags to ipl.c
s390/ipl: get rid of ipl_ssid and ipl_devno
s390/ipl: unite diag308 and scsi boot ipl blocks
s390/ipl: ensure loadparm valid flag is set
s390/qdio: lock device while installing IRQ handler
s390/qdio: clear intparm during shutdown
s390/ccwgroup: require at least one ccw device
...
Linus Torvalds [Fri, 13 Apr 2018 03:56:10 +0000 (20:56 -0700)]
Merge tag 'drm-fixes-for-v4.17-rc1' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"One omap, and one alsa pm fix (we merged the breaking patch via drm
tree).
Otherwise it's two bunches of amdgpu fixes, removing an unneeded file,
some DC fixes, HDMI audio regression fix, and some vega12 fixes"
* tag 'drm-fixes-for-v4.17-rc1' of git://people.freedesktop.org/~airlied/linux: (27 commits)
Revert "drm/amd/display: disable CRTCs with NULL FB on their primary plane (V2)"
Revert "drm/amd/display: fix dereferencing possible ERR_PTR()"
drm/amd/display: Fix regamma not affecting full-intensity color values
drm/amd/display: Fix FBC text console corruption
drm/amd/display: Only register backlight device if embedded panel connected
drm/amd/display: fix brightness level after resume from suspend
drm/amd/display: HDMI has no sound after Panel power off/on
drm/amdgpu: add MP1 and THM hw ip base reg offset
drm/amdgpu: fix null pointer panic with direct fw loading on gpu reset
drm/radeon: add PX quirk for Asus K73TK
drm/omap: fix crash if there's no video PLL
drm/amdgpu: Fix memory leaks at amdgpu_init() error path
drm/amdgpu: Fix PCIe lane width calculation
drm/radeon: Fix PCIe lane width calculation
drm/amdgpu/si: implement get/set pcie_lanes asic callback
drm/amdgpu: Add support for SRBM selection v3
Revert "drm/amdgpu: Don't change preferred domian when fallback GTT v5"
drm/amd/powerply: fix power reading on Fiji
drm/amd/powerplay: Enable ACG SS feature
drm/amdgpu/sdma: fix mask in emit_pipeline_sync
...
Linus Torvalds [Fri, 13 Apr 2018 03:54:01 +0000 (20:54 -0700)]
Merge tag 'trace-v4.17-2' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"A few clean ups and bug fixes:
- replace open coded "ARRAY_SIZE()" with macro
- updates to uprobes
- bug fix for perf event filter on error path"
* tag 'trace-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Enforce passing in filter=NULL to create_filter()
trace_uprobe: Simplify probes_seq_show()
trace_uprobe: Use %lx to display offset
tracing/uprobe: Add support for overlayfs
tracing: Use ARRAY_SIZE() macro instead of open coding it
Alexey Dobriyan [Thu, 12 Apr 2018 20:31:17 +0000 (23:31 +0300)]
proc: fixup copyright sign
Add copyright in two files before they get autorubberstamped.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 13 Apr 2018 03:50:38 +0000 (20:50 -0700)]
Merge tag 'pci-v4.17-changes-2' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- mark Extended Tags as broken on Broadcom HT1100 and HT2000 Root Ports
to fix drm/Xorg hangs and unresponsive keyboards (Sinan Kaya)
- remove useless messages during resource reassignment (Desnes A. Nunes
do Rosario)
* tag 'pci-v4.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Remove messages about reassigning resources
PCI: Mark Broadcom HT1100 and HT2000 Root Port Extended Tags as broken
Linus Torvalds [Fri, 13 Apr 2018 00:07:04 +0000 (17:07 -0700)]
Merge branch 'parisc-4.17-2' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- fix panic when halting system via "shutdown -h now"
- drop own coding in favour of generic CONFIG_COMPAT_BINFMT_ELF
implementation
- add FPE_CONDTRAP constant: last outstanding parisc-specific cleanup
for Eric Biedermans siginfo patches
- move some functions to .init and some to .text.hot linker sections
* 'parisc-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Prevent panic at system halt
parisc: Switch to generic COMPAT_BINFMT_ELF
parisc: Move cache flush functions into .text.hot section
parisc/signal: Add FPE_CONDTRAP for conditional trap handling
Thomas Petazzoni [Mon, 4 Dec 2017 15:09:07 +0000 (16:09 +0100)]
arch/sh: pcie-sh7786: handle non-zero DMA offset
On SuperH, the base of the physical memory might be different from
zero. In this case, PCI address zero will map to a non-zero physical
address. In order to make sure that the DMA mapping API takes care of
this DMA offset, we must fill in the dev->dma_pfn_offset field for PCI
devices. This gets done in the pcibios_bus_add_device() hook, called
for each new PCI device detected.
The dma_pfn_offset global variable is re-calculated for every PCI
controller available on the platform, but that's not an issue because
its value will each time be exactly the same, as it only depends on
the memory start address and memory size.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
Thomas Petazzoni [Mon, 4 Dec 2017 15:09:06 +0000 (16:09 +0100)]
arch/sh: pcie-sh7786: adjust the memory mapping
The code setting up the PCI -> SuperHighway mapping doesn't take into
account the fact that the address stored in PCIELARx must be aligned
with the size stored in PCIELAMRx.
For example, when your physical memory starts at 0x0800_0000 (128 MB),
a size of 64 MB or 128 MB is fine. However, if you have 256 MB of
memory, it doesn't work because the base address is not aligned on the
size.
In such situation, we have to round down the base address to make sure
it is aligned on the size of the area. For for a 0x0800_0000 base
address with 256 MB of memory, we will round down to 0x0, and extend
the size of the mapping to 512 MB.
This allows the mapping to work on platforms that have 256 MB of
RAM. The current setup would only work with 128 MB of RAM or less.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
Thomas Petazzoni [Mon, 4 Dec 2017 15:09:05 +0000 (16:09 +0100)]
arch/sh: pcie-sh7786: adjust PCI MEM and IO regions
The current definition of the PCIe IO and MEM resources for SH7786
doesn't match what the datasheet says. For example, for PCIe0
0xfe100000 is advertised by the datasheet as a PCI IO region, while
0xfd000000 is advertised as a PCI MEM region. The code currently
inverts the two.
The SH4A_PCIEPARL and SH4A_PCIEPTCTLR registers allow to define the
base address and role of the different regions (including whether it's
a MEM or IO region). However, practical experience on a SH7786 shows
that if 0xfe100000 is used for LEL and 0xfd000000 for IO, a PCIe
device using two MEM BARs cannot be accessed at all. Simply using
0xfe100000 for IO and 0xfd000000 for MEM makes the PCIe device
accessible.
It is very likely that this was never seen because there are two other
PCI MEM region listed in the resources. However, for different
reasons, none of the two other MEM regions are usable on the specific
SH7786 platform the problem was encountered. Therefore, the last MEM
region at 0xfe100000 was used to place the BARs, making the device
non-functional.
This commit therefore adjusts those PCI MEM and IO resources
definitions so that they match what the datasheet says. They have only
been tested with PCIe 0.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
Thomas Petazzoni [Mon, 4 Dec 2017 15:09:04 +0000 (16:09 +0100)]
arch/sh: pcie-sh7786: exclude unusable PCI MEM areas
Depending on the physical memory layout, some PCI MEM areas are not
usable. According to the SH7786 datasheet, the PCI MEM area from
1000_0000 to 13FF_FFFF is only usable if the physical memory layout
(in MMSELR) is 1, 2, 5 or 6. In all other configurations, this PCI MEM
area is not usable (because it overlaps with DRAM).
Therefore, this commit adjusts the PCI SH7786 initialization to mark
the relevant PCI resource as IORESOURCE_DISABLED if we can't use it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
Thomas Petazzoni [Mon, 4 Dec 2017 15:09:03 +0000 (16:09 +0100)]
arch/sh: pcie-sh7786: mark unavailable PCI resource as disabled
Some PCI MEM resources are marked as IORESOURCE_MEM_32BIT, which means
they are only usable when the SH core runs in 32-bit mode. In 29-bit
mode, such memory regions are not usable.
The existing code for SH7786 properly skips such regions when
configuring the PCIe controller registers. However, because such
regions are still described in the resource array, the
pcibios_scanbus() function in the SuperH pci.c will register them to
the PCI core. Due to this, the PCI core will allocate MEM areas from
this resource, and assign BARs pointing to this area, even though it's
unusable.
In order to prevent this from happening, we mark such regions as
IORESOURCE_DISABLED, which tells the SuperH pci.c pcibios_scanbus()
function to skip them.
Note that we separate marking the region as disabled from skipping it,
because other regions will be marked as disabled in follow-up patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
Thomas Petazzoni [Mon, 4 Dec 2017 15:09:02 +0000 (16:09 +0100)]
arch/sh: pci: don't use disabled resources
In pcibios_scanbus(), we provide to the PCI core the usable MEM and IO
regions using pci_add_resource_offset(). We travel through all
resources available in the "struct pci_channel".
Also, in register_pci_controller(), we travel through all resources to
request them, making sure they don't conflict with already requested
resources.
However, some resources may be disabled, in which case they should not
be requested nor provided to the PCI core.
In the current situation, none of the resources are disabled. However,
follow-up patches in this series will make some resources disabled,
making this preliminary change necessary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
Thomas Petazzoni [Mon, 4 Dec 2017 15:09:01 +0000 (16:09 +0100)]
arch/sh: make the DMA mapping operations observe dev->dma_pfn_offset
Some devices may have a non-zero DMA offset, i.e an offset between the
DMA address and the physical address. Such an offset can be encoded
into the dma_pfn_offset field of "struct device", but the SuperH
implementation of the DMA mapping API does not observe this
information.
This commit fixes that by ensuring the DMA address is properly
calculated depending on this DMA offset.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
Thomas Petazzoni [Mon, 4 Dec 2017 15:09:00 +0000 (16:09 +0100)]
arch/sh: add sh7786_mm_sel() function
The SH7786 has different physical memory layout configurations,
configurable through the MMSELR register. The configuration is
typically defined by the bootloader, so Linux generally doesn't care.
Except that depending on the configuration, some PCI MEM areas may or
may not be available. This commit adds a helper function that allows
to retrieve the current physical memory layout configuration. It will
be used in a following patch to exclude unusable PCI MEM areas during
the PCI initialization.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rich Felker <dalias@libc.org>
Rich Felker [Fri, 16 Mar 2018 00:01:36 +0000 (20:01 -0400)]
sh: fix debug trap failure to process signals before return to user
When responding to a debug trap (breakpoint) in userspace, the
kernel's trap handler raised SIGTRAP but returned from the trap via a
code path that ignored pending signals, resulting in an infinite loop
re-executing the trapping instruction.
Signed-off-by: Rich Felker <dalias@libc.org>
Rich Felker [Mon, 31 Jul 2017 05:27:50 +0000 (01:27 -0400)]
sh: fix memory corruption of unflattened device tree
unflatten_device_tree() makes use of memblock allocation, and
therefore must be called before paging_init() migrates the memblock
allocation data to the bootmem framework. Otherwise the record of the
allocation for the expanded device tree will be lost, and will
eventually be clobbered when allocated for another use.
Signed-off-by: Rich Felker <dalias@libc.org>
Aurelien Jarno [Tue, 2 May 2017 13:00:12 +0000 (13:00 +0000)]
sh: fix futex FUTEX_OP_SET op on userspace addresses
Commit
00b73d8d1b71 ("sh: add working futex atomic ops on userspace
addresses for smp") changed the futex_atomic_op_inuser function to
use a loop. In case of the FUTEX_OP_SET op with a userspace address
containing a value different of 0, this loop is an endless loop.
Fix that by loading the value of oldval from the userspace before doing
the cmpxchg op, also for the FUTEX_OP_SET case.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Rich Felker <dalias@libc.org>
Dave Airlie [Thu, 12 Apr 2018 23:25:21 +0000 (09:25 +1000)]
Merge branch 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux into drm-next
- Add a PX quirk for radeon
- Fix flickering and stability issues with DC on some platforms
- Fix HDMI audio regression
- Few other misc DC and base driver fixes
* 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux:
Revert "drm/amd/display: disable CRTCs with NULL FB on their primary plane (V2)"
Revert "drm/amd/display: fix dereferencing possible ERR_PTR()"
drm/amd/display: Fix regamma not affecting full-intensity color values
drm/amd/display: Fix FBC text console corruption
drm/amd/display: Only register backlight device if embedded panel connected
drm/amd/display: fix brightness level after resume from suspend
drm/amd/display: HDMI has no sound after Panel power off/on
drm/amdgpu: add MP1 and THM hw ip base reg offset
drm/amdgpu: fix null pointer panic with direct fw loading on gpu reset
drm/radeon: add PX quirk for Asus K73TK
Dave Airlie [Thu, 12 Apr 2018 23:25:07 +0000 (09:25 +1000)]
Merge tag 'drm-misc-next-fixes-2018-04-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
omap: Fix crash on AM4 EVM, and all OMAP2/3 boards (Tomi)
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
* tag 'drm-misc-next-fixes-2018-04-11' of git://anongit.freedesktop.org/drm/drm-misc:
drm/omap: fix crash if there's no video PLL
Linus Torvalds [Thu, 12 Apr 2018 20:28:22 +0000 (13:28 -0700)]
Merge tag 'xfs-4.17-merge-4' of git://git./fs/xfs/xfs-linux
Pull more xfs updates from Darrick Wong:
"Most of these are code cleanups, but there are a couple of notable
use-after-free bug fixes.
This series has been run through a full xfstests run over the week and
through a quick xfstests run against this morning's master, with no
major failures reported.
- clean up unnecessary function call parameters
- fix a use-after-free bug when aborting logging intents
- refactor filestreams state data to avoid use-after-free bug
- fix incorrect removal of cow extents when truncating extended
attributes.
- refactor open-coded __set_page_dirty in favor of using vfs
function.
- fix a deadlock when fstrim and fs shutdown race"
* tag 'xfs-4.17-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
Force log to disk before reading the AGF during a fstrim
Export __set_page_dirty
xfs: only cancel cow blocks when truncating the data fork
xfs: non-scrub - remove unused function parameters
xfs: remove filestream item xfs_inode reference
xfs: fix intent use-after-free on abort
xfs: Remove "committed" argument of xfs_dir_ialloc
Linus Torvalds [Thu, 12 Apr 2018 20:00:44 +0000 (13:00 -0700)]
Merge tag 'gfs2-4.17.fixes2' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull more gfs2 updates from Bob Peterson:
"We decided to request the latest three patches to be merged into this
merge window while it's still open.
- The first patch adds a new function to lockref:
lockref_put_not_zero
- The second patch fixes GFS2's glock dump code so it uses the new
lockref function. This fixes a problem whereby lock dumps could
miss glocks.
- I made a minor patch to update some comments and fix the lock
ordering text in our gfs2-glocks.txt Documentation file"
* tag 'gfs2-4.17.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Minor improvements to comments and documentation
gfs2: Stop using rhashtable_walk_peek
lockref: Add lockref_put_not_zero
Linus Torvalds [Thu, 12 Apr 2018 19:55:50 +0000 (12:55 -0700)]
Merge tag 'nfs-for-4.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Stable bugfixes:
- xprtrdma: Fix corner cases when handling device removal # v4.12+
- xprtrdma: Fix latency regression on NUMA NFS/RDMA clients # v4.15+
Features:
- New sunrpc tracepoint for RPC pings
- Finer grained NFSv4 attribute checking
- Don't unnecessarily return NFS v4 delegations
Other bugfixes and cleanups:
- Several other small NFSoRDMA cleanups
- Improvements to the sunrpc RTT measurements
- A few sunrpc tracepoint cleanups
- Various fixes for NFS v4 lock notifications
- Various sunrpc and NFS v4 XDR encoding cleanups
- Switch to the ida_simple API
- Fix NFSv4.1 exclusive create
- Forget acl cache after setattr operation
- Don't advance the nfs_entry readdir cookie if xdr decoding fails"
* tag 'nfs-for-4.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (47 commits)
NFS: advance nfs_entry cookie only after decoding completes successfully
NFSv3/acl: forget acl cache after setattr
NFSv4.1: Fix exclusive create
NFSv4: Declare the size up to date after it was set.
nfs: Use ida_simple API
NFSv4: Fix the nfs_inode_set_delegation() arguments
NFSv4: Clean up CB_GETATTR encoding
NFSv4: Don't ask for attributes when ACCESS is protected by a delegation
NFSv4: Add a helper to encode/decode struct timespec
NFSv4: Clean up encode_attrs
NFSv4; Clean up XDR encoding of type bitmap4
NFSv4: Allow GFP_NOIO sleeps in decode_attr_owner/decode_attr_group
SUNRPC: Add a helper for encoding opaque data inline
SUNRPC: Add helpers for decoding opaque and string types
NFSv4: Ignore change attribute invalidations if we hold a delegation
NFS: More fine grained attribute tracking
NFS: Don't force unnecessary cache invalidation in nfs_update_inode()
NFS: Don't redirty the attribute cache in nfs_wcc_update_inode()
NFS: Don't force a revalidation of all attributes if change is missing
NFS: Convert NFS_INO_INVALID flags to unsigned long
...
Linus Torvalds [Thu, 12 Apr 2018 19:28:32 +0000 (12:28 -0700)]
Merge branch 'work.thaw' of git://git./linux/kernel/git/viro/vfs
Pull vfs thaw updates from Al Viro:
"An ancient series that has fallen through the cracks in the previous
cycle"
* 'work.thaw' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
buffer.c: call thaw_super during emergency thaw
vfs: factor sb iteration out of do_emergency_remount
Harry Wentland [Thu, 12 Apr 2018 14:51:52 +0000 (10:51 -0400)]
Revert "drm/amd/display: disable CRTCs with NULL FB on their primary plane (V2)"
This seems to cause flickering and lock-ups for a wide range of users.
Revert until we've found a proper fix for the flickering and lock-ups.
This reverts commit
36cc549d59864b7161f0e23d710c1c4d1b9cf022.
Cc: Shirish S <shirish.s@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linus Torvalds [Thu, 12 Apr 2018 18:59:06 +0000 (11:59 -0700)]
Merge branch 'afs-dh' of git://git./linux/kernel/git/viro/vfs
Pull AFS updates from Al Viro:
"The AFS series posted by dhowells depended upon lookup_one_len()
rework; now that prereq is in the mainline, that series had been
rebased on top of it and got some exposure and testing..."
* 'afs-dh' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
afs: Do better accretion of small writes on newly created content
afs: Add stats for data transfer operations
afs: Trace protocol errors
afs: Locally edit directory data for mkdir/create/unlink/...
afs: Adjust the directory XDR structures
afs: Split the directory content defs into a header
afs: Fix directory handling
afs: Split the dynroot stuff out and give it its own ops tables
afs: Keep track of invalid-before version for dentry coherency
afs: Rearrange status mapping
afs: Make it possible to get the data version in readpage
afs: Init inode before accessing cache
afs: Introduce a statistics proc file
afs: Dump bad status record
afs: Implement @cell substitution handling
afs: Implement @sys substitution handling
afs: Prospectively look up extra files when doing a single lookup
afs: Don't over-increment the cell usage count when pinning it
afs: Fix checker warnings
vfs: Remove the const from dir_context::actor
Harry Wentland [Thu, 12 Apr 2018 14:51:51 +0000 (10:51 -0400)]
Revert "drm/amd/display: fix dereferencing possible ERR_PTR()"
This reverts commit
cd2d6c92a8e39d7e50a5af9fcc67d07e6a89e91d.
Cc: Shirish S <shirish.s@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leo (Sunpeng) Li [Tue, 3 Apr 2018 20:07:16 +0000 (16:07 -0400)]
drm/amd/display: Fix regamma not affecting full-intensity color values
Hardware understands the regamma LUT as a piecewise linear function,
with points spaced exponentially along the range. We previously
programmed the LUT for range [2^-10, 2^0). This causes (normalized)
color values of 1 (=2^0) to miss the programmed LUT, and fall onto the
end region.
For DCE, the end region is extrapolated using a single (base, slope)
pair, using the max y-value from the last point in the curve as base.
This presents a problem, since this value affects all three color
channels. Scaling down the intensity of say - the blue regamma curve -
will not affect it's end region. This is especially noticiable when
using RedShift. It scales down the blue and green channels, but leaves
full-intensity colors unshifted.
Therefore, extend the range to cover [2^-10, 2^1) by programming another
hardware segment, containing only one point. That way, we won't be
hitting the end region.
Note that things are a bit different for DCN, since the end region can
be set per-channel.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Thu, 29 Mar 2018 15:14:25 +0000 (11:14 -0400)]
drm/amd/display: Fix FBC text console corruption
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Mon, 12 Mar 2018 15:16:47 +0000 (11:16 -0400)]
drm/amd/display: Only register backlight device if embedded panel connected
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linus Torvalds [Thu, 12 Apr 2018 18:09:05 +0000 (11:09 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) In ip_gre tunnel, handle the conflict between TUNNEL_{SEQ,CSUM} and
GSO/LLTX properly. From Sabrina Dubroca.
2) Stop properly on error in lan78xx_read_otp(), from Phil Elwell.
3) Don't uncompress in slip before rstate is initialized, from Tejaswi
Tanikella.
4) When using 1.x firmware on aquantia, issue a deinit before we
hardware reset the chip, otherwise we break dirty wake WOL. From
Igor Russkikh.
5) Correct log check in vhost_vq_access_ok(), from Stefan Hajnoczi.
6) Fix ethtool -x crashes in bnxt_en, from Michael Chan.
7) Fix races in l2tp tunnel creation and duplicate tunnel detection,
from Guillaume Nault.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
l2tp: fix race in duplicate tunnel detection
l2tp: fix races in tunnel creation
tun: send netlink notification when the device is modified
tun: set the flags before registering the netdevice
lan78xx: Don't reset the interface on open
bnxt_en: Fix NULL pointer dereference at bnxt_free_irq().
bnxt_en: Need to include RDMA rings in bnxt_check_rings().
bnxt_en: Support max-mtu with VF-reps
bnxt_en: Ignore src port field in decap filter nodes
bnxt_en: do not allow wildcard matches for L2 flows
bnxt_en: Fix ethtool -x crash when device is down.
vhost: return bool from *_access_ok() functions
vhost: fix vhost_vq_access_ok() log check
vhost: Fix vhost_copy_to_user()
net: aquantia: oops when shutdown on already stopped device
net: aquantia: Regression on reset with 1.x firmware
cdc_ether: flag the Cinterion AHS8 modem by gemalto as WWAN
slip: Check if rstate is initialized before uncompressing
lan78xx: Avoid spurious kevent 4 "error"
lan78xx: Correctly indicate invalid OTP
...
Linus Torvalds [Thu, 12 Apr 2018 18:04:35 +0000 (11:04 -0700)]
Merge tag 'for-linus-4.17-rc1-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"A few fixes of Xen related core code and drivers"
* tag 'for-linus-4.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pvh: Indicate XENFEAT_linux_rsdp_unrestricted to Xen
xen/acpi: off by one in read_acpi_id()
xen/acpi: upload _PSD info for non Dom0 CPUs too
x86/xen: Delay get_cpu_cap until stack canary is established
xen: xenbus_dev_frontend: Verify body of XS_TRANSACTION_END
xen: xenbus: Catch closing of non existent transactions
xen: xenbus_dev_frontend: Fix XS_TRANSACTION_END handling
Linus Torvalds [Thu, 12 Apr 2018 18:00:48 +0000 (11:00 -0700)]
Merge tag 'dma-mapping-4.17-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
"Fix for one swiotlb regression in 2.16 from Takashi"
* tag 'dma-mapping-4.17-2' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix unexpected swiotlb_alloc_coherent failures
Linus Torvalds [Thu, 12 Apr 2018 17:59:03 +0000 (10:59 -0700)]
Merge tag 'mmc-v4.17-2' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Prevent bus reference leak in mmc_blk_init()
MMC host:
- tmio: Fix error handling when issuing CMD23
- jz4740: Fix race condition in IRQ mask update"
* tag 'mmc-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: tmio: Fix error handling when issuing CMD23
mmc: core: Prevent bus reference leak in mmc_blk_init()
mmc: jz4740: Fix race condition in IRQ mask update
Linus Torvalds [Thu, 12 Apr 2018 17:21:19 +0000 (10:21 -0700)]
Merge tag 'for_linus-4.16' of git://git./linux/kernel/git/jwessel/kgdb
Pull kdb updates from Jason Wessel:
- fix 2032 time access issues and new compiler warnings
- minor regression test cleanup
- formatting fixes for end user use of kdb
* tag 'for_linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
kdb: use memmove instead of overlapping memcpy
kdb: use ktime_get_mono_fast_ns() instead of ktime_get_ts()
kdb: bl: don't use tab character in output
kdb: drop newline in unknown command output
kdb: make "mdr" command repeat
kdb: use __ktime_get_real_seconds instead of __current_kernel_time
misc: kgdbts: Display progress of asynchronous tests
Linus Torvalds [Thu, 12 Apr 2018 17:18:02 +0000 (10:18 -0700)]
Merge tag 'microblaze-4.17-rc1' of git://git.monstr.eu/linux-2.6-microblaze
Pull microblaze updates from Michal Simek:
"Use generic pci_mmap_resource_range()"
* tag 'microblaze-4.17-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Use generic pci_mmap_resource_range()
microblaze: Provide pgprot_device/writecombine macros for nommu
Bob Peterson [Fri, 6 Apr 2018 20:07:45 +0000 (13:07 -0700)]
GFS2: Minor improvements to comments and documentation
This patch simply fixes some comments and the gfs2-glocks.txt file:
Places where i_rwsem was called i_mutex, and adding i_rw_mutex.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Andreas Gruenbacher [Wed, 28 Mar 2018 10:05:35 +0000 (12:05 +0200)]
gfs2: Stop using rhashtable_walk_peek
Function rhashtable_walk_peek is problematic because there is no
guarantee that the glock previously returned still exists; when that key
is deleted, rhashtable_walk_peek can end up returning a different key,
which will cause an inconsistent glock dump. Fix this by keeping track
of the current glock in the seq file iterator functions instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Andreas Gruenbacher [Thu, 29 Mar 2018 07:07:46 +0000 (08:07 +0100)]
lockref: Add lockref_put_not_zero
Put a lockref unless the lockref is dead or its count would become zero.
This is the same as lockref_put_or_lock except that the lock is never
left held.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Linus Torvalds [Thu, 12 Apr 2018 16:15:48 +0000 (09:15 -0700)]
Merge tag 'asm-generic' of git://git./linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"I have one regression fix for a minor build problem after the
architecture removal series, plus a rework of the barriers in the
readl/writel functions, thanks to work by Sinan Kaya:
This started from a discussion on the linuxpcc and rdma mailing
lists[1]. To summarize, we decided that architectures are responsible
to serialize readl() and writel() accesses on a device MMIO space
relative to DMA performed by that device.
This series provides a pessimistic implementation of that behavior for
asm-generic/io.h, which is in turn used by a number of architectures
(h8300, microblaze, nios2, openrisc, s390, sparc, um, unicore32, and
xtensa). Some of those presumably need no extra barriers, or something
weaker than rmb()/wmb(), and they are advised to override the new
default for better performance.
For inb()/outb(), the same barriers are used, but architectures might
want to add another barrier to outb() here if that can guarantee
non-posted behavior (some architectures can, others cannot do that).
The readl_relaxed()/writel_relaxed() family of functions retains the
existing behavior with no extra barriers"
[1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-March/170481.html
* tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
io: change writeX_relaxed() to remove barriers
io: change readX_relaxed() to remove barriers
dts: remove cris & metag dts hard link file
io: change inX() to have their own IO barrier overrides
io: change outX() to have their own IO barrier overrides
io: define stronger ordering for the default writeX() implementation
io: define stronger ordering for the default readX() implementation
io: define several IO & PIO barrier types for the asm-generic version
Linus Torvalds [Thu, 12 Apr 2018 01:58:27 +0000 (18:58 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio update from Michael Tsirkin:
"This adds reporting hugepage stats to virtio-balloon"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_balloon: export hugetlb page allocation counts
Linus Torvalds [Thu, 12 Apr 2018 01:50:41 +0000 (18:50 -0700)]
Merge tag 'iommu-updates-v4.17' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- OF_IOMMU support for the Rockchip iommu driver so that it can use
generic DT bindings
- rework of locking in the AMD IOMMU interrupt remapping code to make
it work better in RT kernels
- support for improved iotlb flushing in the AMD IOMMU driver
- support for 52-bit physical and virtual addressing in the ARM-SMMU
- various other small fixes and cleanups
* tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (53 commits)
iommu/io-pgtable-arm: Avoid warning with 32-bit phys_addr_t
iommu/rockchip: Support sharing IOMMU between masters
iommu/rockchip: Add runtime PM support
iommu/rockchip: Fix error handling in init
iommu/rockchip: Use OF_IOMMU to attach devices automatically
iommu/rockchip: Use IOMMU device for dma mapping operations
dt-bindings: iommu/rockchip: Add clock property
iommu/rockchip: Control clocks needed to access the IOMMU
iommu/rockchip: Fix TLB flush of secondary IOMMUs
iommu/rockchip: Use iopoll helpers to wait for hardware
iommu/rockchip: Fix error handling in attach
iommu/rockchip: Request irqs in rk_iommu_probe()
iommu/rockchip: Fix error handling in probe
iommu/rockchip: Prohibit unbind and remove
iommu/amd: Return proper error code in irq_remapping_alloc()
iommu/amd: Make amd_iommu_devtable_lock a spin_lock
iommu/amd: Drop the lock while allocating new irq remap table
iommu/amd: Factor out setting the remap table for a devid
iommu/amd: Use `table' instead `irt' as variable name in amd_iommu_update_ga()
iommu/amd: Remove the special case from alloc_irq_table()
...
Linus Torvalds [Thu, 12 Apr 2018 00:03:20 +0000 (17:03 -0700)]
Merge tag 'pm-4.17-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These include one big-ticket item which is the rework of the idle loop
in order to prevent CPUs from spending too much time in shallow idle
states. It reduces idle power on some systems by 10% or more and may
improve performance of workloads in which the idle loop overhead
matters. This has been in the works for several weeks and it has been
tested and reviewed quite thoroughly.
Also included are changes that finalize the cpufreq cleanup moving
frequency table validation from drivers to the core, a few fixes and
cleanups of cpufreq drivers, a cpuidle documentation update and a PM
QoS core update to mark the expected switch fall-throughs in it.
Specifics:
- Rework the idle loop in order to prevent CPUs from spending too
much time in shallow idle states by making it stop the scheduler
tick before putting the CPU into an idle state only if the idle
duration predicted by the idle governor is long enough.
That required the code to be reordered to invoke the idle governor
before stopping the tick, among other things (Rafael Wysocki,
Frederic Weisbecker, Arnd Bergmann).
- Add the missing description of the residency sysfs attribute to the
cpuidle documentation (Prashanth Prakash).
- Finalize the cpufreq cleanup moving frequency table validation from
drivers to the core (Viresh Kumar).
- Fix a clock leak regression in the armada-37xx cpufreq driver
(Gregory Clement).
- Fix the initialization of the CPU performance data structures for
shared policies in the CPPC cpufreq driver (Shunyong Yang).
- Clean up the ti-cpufreq, intel_pstate and CPPC cpufreq drivers a
bit (Viresh Kumar, Rafael Wysocki).
- Mark the expected switch fall-throughs in the PM QoS core (Gustavo
Silva)"
* tag 'pm-4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
tick-sched: avoid a maybe-uninitialized warning
cpufreq: Drop cpufreq_table_validate_and_show()
cpufreq: SCMI: Don't validate the frequency table twice
cpufreq: CPPC: Initialize shared perf capabilities of CPUs
cpufreq: armada-37xx: Fix clock leak
cpufreq: CPPC: Don't set transition_latency
cpufreq: ti-cpufreq: Use builtin_platform_driver()
cpufreq: intel_pstate: Do not include debugfs.h
PM / QoS: mark expected switch fall-throughs
cpuidle: Add definition of residency to sysfs documentation
time: hrtimer: Use timerqueue_iterate_next() to get to the next timer
nohz: Avoid duplication of code related to got_idle_tick
nohz: Gather tick_sched booleans under a common flag field
cpuidle: menu: Avoid selecting shallow states with stopped tick
cpuidle: menu: Refine idle state selection for running tick
sched: idle: Select idle state before stopping the tick
time: hrtimer: Introduce hrtimer_next_event_without()
time: tick-sched: Split tick_nohz_stop_sched_tick()
cpuidle: Return nohz hint from cpuidle_select()
jiffies: Introduce USER_TICK_USEC and redefine TICK_USEC
...
Linus Torvalds [Wed, 11 Apr 2018 23:42:27 +0000 (16:42 -0700)]
Merge tag 'ktest-v4.17' of git://git./linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
"These commits have either been sitting in my INBOX or have been in my
local tree for some time. I need to push them upstream:
- Separate out config-bisect.pl from ktest.pl.
This allows users to do config bisects without full ktest setup.
- Email on status change.
Allow the user to be emailed on test start, finish, failure, etc.
- Other small fixes and enhancements"
* tag 'ktest-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: (24 commits)
ktest: Take submenu into account for grub2 menus
ktest.pl: Add MAIL_COMMAND option to define how to send email
ktest.pl: Use run_command to execute sending mail
ktest.pl: Allow dodie be recursive
ktest.pl: Kill test if mailer is not supported
ktest.pl: Add MAIL_PATH option to define where to find the mailer
ktest.pl: No need to print no mailer is specified when mailto is not
Ktest: add email options to sample.config
Ktest: Use dodie for critical falures
Ktest: Add SigInt handling
Ktest: Add email support
ktest.pl: Detect if a config-bisect was interrupted
ktest.pl: Make finding config-bisect.pl dynamic
ktest.pl: Have ktest.pl pass -r to config-bisect.pl to reset bisect
ktest.pl: Use diffconfig if available for failed config bisects
ktest.pl: Allow for the config-bisect.pl output to display to console
ktest: Use config-bisect.pl in ktest.pl
ktest: Add standalone config-bisect.pl program
ktest: Set do_not_reboot=y for CONFIG_BISECT_TYPE=build
ktest: Set buildonly=1 for CONFIG_BISECT_TYPE=build
...
Linus Torvalds [Wed, 11 Apr 2018 23:39:34 +0000 (16:39 -0700)]
Merge tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"Minor bug fixes and improvements"
* tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifs:
ubi: Reject MLC NAND
ubifs: Remove useless parameter of lpt_heap_replace
ubifs: Constify struct ubifs_lprops in scan_for_leb_for_idx
ubifs: remove unnecessary assignment
ubi: Fix error for write access
ubi: fastmap: Don't flush fastmap work on detach
ubifs: Check ubifs_wbuf_sync() return code
Linus Torvalds [Wed, 11 Apr 2018 23:36:47 +0000 (16:36 -0700)]
Merge git://git./pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- a new and faster epoll based IRQ controller and NIC driver
- misc fixes and janitorial updates
* git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
Fix vector raw inintialization logic
Migrate vector timers to new timer API
um: Compile with modern headers
um: vector: Fix an error handling path in 'vector_parse()'
um: vector: Fix a memory allocation check
um: vector: fix missing unlock on error in vector_net_open()
um: Add missing EXPORT for free_irq_by_fd()
High Performance UML Vector Network Driver
Epoll based IRQ controller
um: Use POSIX ucontext_t instead of struct ucontext
um: time: Use timespec64 for persistent clock
um: Restore symbol versions for __memcpy and memcpy
Linus Torvalds [Wed, 11 Apr 2018 23:12:21 +0000 (16:12 -0700)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here is a very small set of fixes for inclusion in linux-4.17-rc1: Two
changes for the maintainer file, and one more fix for the newly added
npcm platform, to enable the level 2 cache controller"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
MAINTAINERS: Update ASPEED entry with details
MAINTAINERS: Migrate oxnas list to groups.io
arm: npcm: enable L2 cache in NPCM7xx architecture
Linus Torvalds [Wed, 11 Apr 2018 23:02:18 +0000 (16:02 -0700)]
Merge tag 'nios2-v4.17-rc1' of git://git./linux/kernel/git/lftan/nios2
Pull nios2 update from Ley Foon Tan:
"Use read_persistent_clock64() instead of read_persistent_clock()"
* tag 'nios2-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
nios2: Use read_persistent_clock64() instead of read_persistent_clock()
David S. Miller [Wed, 11 Apr 2018 21:41:28 +0000 (17:41 -0400)]
Merge branch 'l2tp-tunnel-creation-fixes'
Guillaume Nault says:
====================
l2tp: tunnel creation fixes
L2TP tunnel creation is racy. We need to make sure that the tunnel
returned by l2tp_tunnel_create() isn't going to be freed while the
caller is using it. This is done in patch #1, by separating tunnel
creation from tunnel registration.
With the tunnel registration code in place, we can now check for
duplicate tunnels in a race-free way. This is done in patch #2, which
incidentally removes the last use of l2tp_tunnel_find().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Tue, 10 Apr 2018 19:01:13 +0000 (21:01 +0200)]
l2tp: fix race in duplicate tunnel detection
We can't use l2tp_tunnel_find() to prevent l2tp_nl_cmd_tunnel_create()
from creating a duplicate tunnel. A tunnel can be concurrently
registered after l2tp_tunnel_find() returns. Therefore, searching for
duplicates must be done at registration time.
Finally, remove l2tp_tunnel_find() entirely as it isn't use anywhere
anymore.
Fixes:
309795f4bec2 ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Tue, 10 Apr 2018 19:01:12 +0000 (21:01 +0200)]
l2tp: fix races in tunnel creation
l2tp_tunnel_create() inserts the new tunnel into the namespace's tunnel
list and sets the socket's ->sk_user_data field, before returning it to
the caller. Therefore, there are two ways the tunnel can be accessed
and freed, before the caller even had the opportunity to take a
reference. In practice, syzbot could crash the module by closing the
socket right after a new tunnel was returned to pppol2tp_create().
This patch moves tunnel registration out of l2tp_tunnel_create(), so
that the caller can safely hold a reference before publishing the
tunnel. This second step is done with the new l2tp_tunnel_register()
function, which is now responsible for associating the tunnel to its
socket and for inserting it into the namespace's list.
While moving the code to l2tp_tunnel_register(), a few modifications
have been done. First, the socket validation tests are done in a helper
function, for clarity. Also, modifying the socket is now done after
having inserted the tunnel to the namespace's tunnels list. This will
allow insertion to fail, without having to revert theses modifications
in the error path (a followup patch will check for duplicate tunnels
before insertion). Either the socket is a kernel socket which we
control, or it is a user-space socket for which we have a reference on
the file descriptor. In any case, the socket isn't going to be closed
from under us.
Reported-by: syzbot+fbeeb5c3b538e8545644@syzkaller.appspotmail.com
Fixes:
fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Helge Deller [Wed, 11 Apr 2018 20:27:07 +0000 (22:27 +0200)]
parisc: Prevent panic at system halt
When issuing a "shutdown -h now", the reboot syscall calls kernel_halt()
which shouldn't return, otherwise one gets this panic:
reboot: System halted
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 4.16.0-32bit+ #560
Backtrace:
[<
1018a694>] show_stack+0x18/0x28
[<
106e68a8>] dump_stack+0x80/0x10c
[<
101a4df8>] panic+0xfc/0x290
[<
101a90b8>] do_exit+0x73c/0x914
[<
101c7e38>] SyS_reboot+0x190/0x1d4
[<
1017e444>] syscall_exit+0x0/0x14
Fix it by letting machine_halt() call machine_power_off() which doesn't
return.
Signed-off-by: Helge Deller <deller@gmx.de>
Sabrina Dubroca [Tue, 10 Apr 2018 14:28:56 +0000 (16:28 +0200)]
tun: send netlink notification when the device is modified
I added dumping of link information about tun devices over netlink in
commit
1ec010e70593 ("tun: export flags, uid, gid, queue information
over netlink"), but didn't add the missing netlink notifications when
the device's exported properties change.
This patch adds notifications when owner/group or flags are modified,
when queues are attached/detached, and when a tun fd is closed.
Reported-by: Thomas Haller <thaller@redhat.com>
Fixes:
1ec010e70593 ("tun: export flags, uid, gid, queue information over netlink")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Tue, 10 Apr 2018 14:28:55 +0000 (16:28 +0200)]
tun: set the flags before registering the netdevice
Otherwise, register_netdevice advertises the creation of the device with
the default flags, instead of what the user requested.
Reported-by: Thomas Haller <thaller@redhat.com>
Fixes:
1ec010e70593 ("tun: export flags, uid, gid, queue information over netlink")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Phil Elwell [Tue, 10 Apr 2018 12:18:25 +0000 (13:18 +0100)]
lan78xx: Don't reset the interface on open
Commit
92571a1aae40 ("lan78xx: Connect phy early") moves the PHY
initialisation into lan78xx_probe, but lan78xx_open subsequently calls
lan78xx_reset. As well as forcing a second round of link negotiation,
this reset frequently prevents the phy interrupt from being generated
(even though the link is up), rendering the interface unusable.
Fix this issue by removing the lan78xx_reset call from lan78xx_open.
Fixes:
92571a1aae40 ("lan78xx: Connect phy early")
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 11 Apr 2018 18:42:00 +0000 (14:42 -0400)]
Merge branch 'bnxt_en-Fixes-for-net'
Michael Chan says:
====================
bnxt_en: Fixes for net.
This bug fix series include NULL pointer fixes in ethtool -x code path
and in the error clean up path when freeing IRQs, a ring accounting bug
that missed rings used by the RDMA driver, and 3 bug fixes related to TC
Flower and VF-reps.
v2: Fixed commit message of patch 4. Changed the pound sign to $ sign
in front of the ip command.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 11 Apr 2018 15:50:18 +0000 (11:50 -0400)]
bnxt_en: Fix NULL pointer dereference at bnxt_free_irq().
When open fails during ethtool -L ring change, for example, the driver
may crash at bnxt_free_irq() because bp->bnapi is NULL.
If we fail to allocate all the new rings, bnxt_open_nic() will free
all the memory including bp->bnapi. Subsequent call to bnxt_close_nic()
will try to dereference bp->bnapi in bnxt_free_irq().
Fix it by checking for !bp->bnapi in bnxt_free_irq().
Fixes:
e5811b8c09df ("bnxt_en: Add IRQ remapping logic.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 11 Apr 2018 15:50:17 +0000 (11:50 -0400)]
bnxt_en: Need to include RDMA rings in bnxt_check_rings().
With recent changes to reserve both L2 and RDMA rings, we need to include
the RDMA rings in bnxt_check_rings(). Otherwise we will under-estimate
the rings we need during ethtool -L and may lead to failure.
Fixes:
fbcfc8e46741 ("bnxt_en: Reserve completion rings and MSIX for bnxt_re RDMA driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sriharsha Basavapatna [Wed, 11 Apr 2018 15:50:16 +0000 (11:50 -0400)]
bnxt_en: Support max-mtu with VF-reps
While a VF is configured with a bigger mtu (> 1500), any packets that
are punted to the VF-rep (slow-path) get dropped by OVS kernel-datapath
with the following message: "dropped over-mtu packet". Fix this by
returning the max-mtu value for a VF-rep derived from its corresponding VF.
VF-rep's mtu can be changed using 'ip' command as shown in this example:
$ ip link set bnxt0_pf0vf0 mtu 9000
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sriharsha Basavapatna [Wed, 11 Apr 2018 15:50:15 +0000 (11:50 -0400)]
bnxt_en: Ignore src port field in decap filter nodes
The driver currently uses src port field (along with other fields) in the
decap tunnel key, while looking up and adding tunnel nodes. This leads to
redundant cfa_decap_filter_alloc() requests to the FW and flow-miss in the
flow engine. Fix this by ignoring the src port field in decap tunnel nodes.
Fixes:
f484f6782e01 ("bnxt_en: add hwrm FW cmds for cfa_encap_record and decap_filter")
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Gospodarek [Wed, 11 Apr 2018 15:50:14 +0000 (11:50 -0400)]
bnxt_en: do not allow wildcard matches for L2 flows
Before this patch the following commands would succeed as far as the
user was concerned:
$ tc qdisc add dev p1p1 ingress
$ tc filter add dev p1p1 parent ffff: protocol all \
flower skip_sw action drop
$ tc filter add dev p1p1 parent ffff: protocol ipv4 \
flower skip_sw src_mac 00:02:00:00:00:01/44 action drop
The current flow offload infrastructure used does not support wildcard
matching for ethernet headers, so do not allow the second or third
commands to succeed. If a user wants to drop traffic on that interface
the protocol and MAC addresses need to be specified explicitly:
$ tc qdisc add dev p1p1 ingress
$ tc filter add dev p1p1 parent ffff: protocol arp \
flower skip_sw action drop
$ tc filter add dev p1p1 parent ffff: protocol ipv4 \
flower skip_sw action drop
...
$ tc filter add dev p1p1 parent ffff: protocol ipv4 \
flower skip_sw src_mac 00:02:00:00:00:01 action drop
$ tc filter add dev p1p1 parent ffff: protocol ipv4 \
flower skip_sw src_mac 00:02:00:00:00:02 action drop
...
There are also checks for VLAN parameters in this patch as other callers
may wildcard those parameters even if tc does not. Using different
flow infrastructure could allow this to work in the future for L2 flows,
but for now it does not.
Fixes:
2ae7408fedfe ("bnxt_en: bnxt: add TC flower filter offload support")
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Wed, 11 Apr 2018 15:50:13 +0000 (11:50 -0400)]
bnxt_en: Fix ethtool -x crash when device is down.
Fix ethtool .get_rxfh() crash by checking for valid indirection table
address before copying the data.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Li [Thu, 29 Mar 2018 14:56:17 +0000 (10:56 -0400)]
drm/amd/display: fix brightness level after resume from suspend
Adding missing call to cache current backlight values.
Otherwise the brightness resets to default value on resume.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Sat, 7 Apr 2018 03:03:12 +0000 (23:03 -0400)]
drm/amd/display: HDMI has no sound after Panel power off/on
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Tue, 10 Apr 2018 04:30:59 +0000 (12:30 +0800)]
drm/amdgpu: add MP1 and THM hw ip base reg offset
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Huang Rui [Sun, 8 Apr 2018 06:39:18 +0000 (14:39 +0800)]
drm/amdgpu: fix null pointer panic with direct fw loading on gpu reset
When system uses fw direct loading, then psp context structure won't be
initiliazed. And it is also unable to execute mode reset.
[ 434.601474] amdgpu 0000:0c:00.0: GPU reset begin!
[ 434.694326] amdgpu 0000:0c:00.0: GPU reset
[ 434.743152] BUG: unable to handle kernel NULL pointer dereference at
0000000000000058
[ 434.838474] IP: psp_gpu_reset+0xc/0x30 [amdgpu]
[ 434.893532] PGD
406ed9067
[ 434.893533] P4D
406ed9067
[ 434.926376] PUD
400b46067
[ 434.959217] PMD 0
[ 435.033379] Oops: 0000 [#1] SMP
[ 435.072573] Modules linked in: amdgpu(OE) chash(OE) gpu_sched(OE) ttm(OE)
drm_kms_helper(OE) drm(OE) fb_sys_fops syscopyarea sysfillrect sysimgblt
rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs lockd grace fscache snd_hda_codec_realtek
snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel snd_hda_codec
snd_hda_core snd_hwdep snd_pcm edac_mce_amd snd_seq_midi snd_seq_midi_event
kvm_amd snd_rawmidi kvm irqbypass crct10dif_pclmul crc32_pclmul snd_seq
ghash_clmulni_intel snd_seq_device pcbc snd_timer eeepc_wmi aesni_intel snd
asus_wmi aes_x86_64 sparse_keymap crypto_simd glue_helper joydev soundcore
wmi_bmof cryptd video i2c_piix4 shpchp 8250_dw i2c_designware_platform mac_hid
i2c_designware_core sunrpc parport_pc ppdev lp parport autofs4 hid_generic igb
usbhid dca ptp mxm_wmi pps_core ahci hid i2c_algo_bit
[ 435.931754] libahci wmi
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nico Sneck [Sat, 7 Apr 2018 15:13:04 +0000 (15:13 +0000)]
drm/radeon: add PX quirk for Asus K73TK
With this the dGPU turns on correctly.
Signed-off-by: Nico Sneck <nicosneck@hotmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Linus Torvalds [Wed, 11 Apr 2018 17:51:26 +0000 (10:51 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
- almost all of the rest of MM
- kasan updates
- lots of procfs work
- misc things
- lib/ updates
- checkpatch
- rapidio
- ipc/shm updates
- the start of willy's XArray conversion
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (140 commits)
page cache: use xa_lock
xarray: add the xa_lock to the radix_tree_root
fscache: use appropriate radix tree accessors
export __set_page_dirty
unicore32: turn flush_dcache_mmap_lock into a no-op
arm64: turn flush_dcache_mmap_lock into a no-op
mac80211_hwsim: use DEFINE_IDA
radix tree: use GFP_ZONEMASK bits of gfp_t for flags
linux/const.h: refactor _BITUL and _BITULL a bit
linux/const.h: move UL() macro to include/linux/const.h
linux/const.h: prefix include guard of uapi/linux/const.h with _UAPI
xen, mm: allow deferred page initialization for xen pv domains
elf: enforce MAP_FIXED on overlaying elf segments
fs, elf: drop MAP_FIXED usage from elf_map
mm: introduce MAP_FIXED_NOREPLACE
MAINTAINERS: update bouncing aacraid@adaptec.com addresses
fs/dcache.c: add cond_resched() in shrink_dentry_list()
include/linux/kfifo.h: fix comment
ipc/shm.c: shm_split(): remove unneeded test for NULL shm_file_data.vm_ops
kernel/sysctl.c: add kdoc comments to do_proc_do{u}intvec_minmax_conv_param
...
Ard Biesheuvel [Thu, 29 Mar 2018 13:13:23 +0000 (15:13 +0200)]
arm64: assembler: add macros to conditionally yield the NEON under PREEMPT
Add support macros to conditionally yield the NEON (and thus the CPU)
that may be called from the assembler code.
In some cases, yielding the NEON involves saving and restoring a non
trivial amount of context (especially in the CRC folding algorithms),
and so the macro is split into three, and the code in between is only
executed when the yield path is taken, allowing the context to be preserved.
The third macro takes an optional label argument that marks the resume
path after a yield has been performed.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Ard Biesheuvel [Thu, 29 Mar 2018 13:13:22 +0000 (15:13 +0200)]
arm64: assembler: add utility macros to push/pop stack frames
We are going to add code to all the NEON crypto routines that will
turn them into non-leaf functions, so we need to manage the stack
frames. To make this less tedious and error prone, add some macros
that take the number of callee saved registers to preserve and the
extra size to allocate in the stack frame (for locals) and emit
the ldp/stp sequences.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Marc Zyngier [Tue, 10 Apr 2018 10:36:45 +0000 (11:36 +0100)]
arm64: Move the content of bpi.S to hyp-entry.S
bpi.S was introduced as we were starting to build the Spectre v2
mitigation framework, and it was rather unclear that it would
become strictly KVM specific.
Now that the picture is a lot clearer, let's move the content
of that file to hyp-entry.S, where it actually belong.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Marc Zyngier [Tue, 10 Apr 2018 10:36:44 +0000 (11:36 +0100)]
arm64: Get rid of __smccc_workaround_1_hvc_*
The very existence of __smccc_workaround_1_hvc_* is a thinko, as
KVM will never use a HVC call to perform the branch prediction
invalidation. Even as a nested hypervisor, it would use an SMC
instruction.
Let's get rid of it.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Marc Zyngier [Tue, 10 Apr 2018 10:36:43 +0000 (11:36 +0100)]
arm64: capabilities: Rework EL2 vector hardening entry
Since
5e7951ce19ab ("arm64: capabilities: Clean up midr range helpers"),
capabilities must be represented with a single entry. If multiple
CPU types can use the same capability, then they need to be enumerated
in a list.
The EL2 hardening stuff (which affects both A57 and A72) managed to
escape the conversion in the above patch thanks to the 4.17 merge
window. Let's fix it now.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Shanker Donthineni [Tue, 10 Apr 2018 10:36:42 +0000 (11:36 +0100)]
arm64: KVM: Use SMCCC_ARCH_WORKAROUND_1 for Falkor BP hardening
The function SMCCC_ARCH_WORKAROUND_1 was introduced as part of SMC
V1.1 Calling Convention to mitigate CVE-2017-5715. This patch uses
the standard call SMCCC_ARCH_WORKAROUND_1 for Falkor chips instead
of Silicon provider service ID 0xC2001700.
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
[maz: reworked errata framework integration]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Matthew Wilcox [Tue, 10 Apr 2018 23:36:56 +0000 (16:36 -0700)]
page cache: use xa_lock
Remove the address_space ->tree_lock and use the xa_lock newly added to
the radix_tree_root. Rename the address_space ->page_tree to ->i_pages,
since we don't really care that it's a tree.
[willy@infradead.org: fix nds32, fs/dax.c]
Link: http://lkml.kernel.org/r/20180406145415.GB20605@bombadil.infradead.orgLink:
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Tue, 10 Apr 2018 23:36:52 +0000 (16:36 -0700)]
xarray: add the xa_lock to the radix_tree_root
This results in no change in structure size on 64-bit machines as it
fits in the padding between the gfp_t and the void *. 32-bit machines
will grow the structure from 8 to 12 bytes. Almost all radix trees are
protected with (at least) a spinlock, so as they are converted from
radix trees to xarrays, the data structures will shrink again.
Initialising the spinlock requires a name for the benefit of lockdep, so
RADIX_TREE_INIT() now needs to know the name of the radix tree it's
initialising, and so do IDR_INIT() and IDA_INIT().
Also add the xa_lock() and xa_unlock() family of wrappers to make it
easier to use the lock. If we could rely on -fplan9-extensions in the
compiler, we could avoid all of this syntactic sugar, but that wasn't
added until gcc 4.6.
Link: http://lkml.kernel.org/r/20180313132639.17387-8-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Tue, 10 Apr 2018 23:36:48 +0000 (16:36 -0700)]
fscache: use appropriate radix tree accessors
Don't open-code accesses to data structure internals.
Link: http://lkml.kernel.org/r/20180313132639.17387-7-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Tue, 10 Apr 2018 23:36:44 +0000 (16:36 -0700)]
export __set_page_dirty
XFS currently contains a copy-and-paste of __set_page_dirty(). Export
it from buffer.c instead.
Link: http://lkml.kernel.org/r/20180313132639.17387-6-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Tue, 10 Apr 2018 23:36:40 +0000 (16:36 -0700)]
unicore32: turn flush_dcache_mmap_lock into a no-op
Unicore doesn't walk the VMA tree in its flush_dcache_page()
implementation, so has no need to take the tree_lock.
Link: http://lkml.kernel.org/r/20180313132639.17387-5-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Tue, 10 Apr 2018 23:36:36 +0000 (16:36 -0700)]
arm64: turn flush_dcache_mmap_lock into a no-op
ARM64 doesn't walk the VMA tree in its flush_dcache_page()
implementation, so has no need to take the tree_lock.
Link: http://lkml.kernel.org/r/20180313132639.17387-4-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Tue, 10 Apr 2018 23:36:33 +0000 (16:36 -0700)]
mac80211_hwsim: use DEFINE_IDA
This is preferred to opencoding an IDA_INIT.
Link: http://lkml.kernel.org/r/20180313132639.17387-2-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Tue, 10 Apr 2018 23:36:28 +0000 (16:36 -0700)]
radix tree: use GFP_ZONEMASK bits of gfp_t for flags
Patch series "XArray", v9. (First part thereof).
This patchset is, I believe, appropriate for merging for 4.17. It
contains the XArray implementation, to eventually replace the radix
tree, and converts the page cache to use it.
This conversion keeps the radix tree and XArray data structures in sync
at all times. That allows us to convert the page cache one function at
a time and should allow for easier bisection. Other than renaming some
elements of the structures, the data structures are fundamentally
unchanged; a radix tree walk and an XArray walk will touch the same
number of cachelines. I have changes planned to the XArray data
structure, but those will happen in future patches.
Improvements the XArray has over the radix tree:
- The radix tree provides operations like other trees do; 'insert' and
'delete'. But what most users really want is an automatically
resizing array, and so it makes more sense to give users an API that
is like an array -- 'load' and 'store'. We still have an 'insert'
operation for users that really want that semantic.
- The XArray considers locking as part of its API. This simplifies a
lot of users who formerly had to manage their own locking just for
the radix tree. It also improves code generation as we can now tell
RCU that we're holding a lock and it doesn't need to generate as much
fencing code. The other advantage is that tree nodes can be moved
(not yet implemented).
- GFP flags are now parameters to calls which may need to allocate
memory. The radix tree forced users to decide what the allocation
flags would be at creation time. It's much clearer to specify them at
allocation time.
- Memory is not preloaded; we don't tie up dozens of pages on the off
chance that the slab allocator fails. Instead, we drop the lock,
allocate a new node and retry the operation. We have to convert all
the radix tree, IDA and IDR preload users before we can realise this
benefit, but I have not yet found a user which cannot be converted.
- The XArray provides a cmpxchg operation. The radix tree forces users
to roll their own (and at least four have).
- Iterators take a 'max' parameter. That simplifies many users and will
reduce the amount of iteration done.
- Iteration can proceed backwards. We only have one user for this, but
since it's called as part of the pagefault readahead algorithm, that
seemed worth mentioning.
- RCU-protected pointers are not exposed as part of the API. There are
some fun bugs where the page cache forgets to use rcu_dereference()
in the current codebase.
- Value entries gain an extra bit compared to radix tree exceptional
entries. That gives us the extra bit we need to put huge page swap
entries in the page cache.
- Some iterators now take a 'filter' argument instead of having
separate iterators for tagged/untagged iterations.
The page cache is improved by this:
- Shorter, easier to read code
- More efficient iterations
- Reduction in size of struct address_space
- Fewer walks from the top of the data structure; the XArray API
encourages staying at the leaf node and conducting operations there.
This patch (of 8):
None of these bits may be used for slab allocations, so we can use them
as radix tree flags as long as we mask them off before passing them to
the slab allocator. Move the IDR flag from the high bits to the
GFP_ZONEMASK bits.
Link: http://lkml.kernel.org/r/20180313132639.17387-3-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masahiro Yamada [Tue, 10 Apr 2018 23:36:24 +0000 (16:36 -0700)]
linux/const.h: refactor _BITUL and _BITULL a bit
Minor cleanups available by _UL and _ULL.
Link: http://lkml.kernel.org/r/1519301715-31798-5-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masahiro Yamada [Tue, 10 Apr 2018 23:36:19 +0000 (16:36 -0700)]
linux/const.h: move UL() macro to include/linux/const.h
ARM, ARM64 and UniCore32 duplicate the definition of UL():
#define UL(x) _AC(x, UL)
This is not actually arch-specific, so it will be useful to move it to a
common header. Currently, we only have the uapi variant for
linux/const.h, so I am creating include/linux/const.h.
I also added _UL(), _ULL() and ULL() because _AC() is mostly used in
the form either _AC(..., UL) or _AC(..., ULL). I expect they will be
replaced in follow-up cleanups. The underscore-prefixed ones should
be used for exported headers.
Link: http://lkml.kernel.org/r/1519301715-31798-4-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masahiro Yamada [Tue, 10 Apr 2018 23:36:15 +0000 (16:36 -0700)]
linux/const.h: prefix include guard of uapi/linux/const.h with _UAPI
Patch series "linux/const.h: cleanups of macros such as UL(), _BITUL(),
BIT() etc", v3.
ARM, ARM64, UniCore32 define UL() as a shorthand of _AC(..., UL). More
architectures may introduce it in the future.
UL() is arch-agnostic, and useful. So let's move it to
include/linux/const.h
Currently, <asm/memory.h> must be included to use UL(). It pulls in more
bloats just for defining some bit macros.
I posted V2 one year ago.
The previous posts are:
https://patchwork.kernel.org/patch/
9498273/
https://patchwork.kernel.org/patch/
9498275/
https://patchwork.kernel.org/patch/
9498269/
https://patchwork.kernel.org/patch/
9498271/
At that time, what blocked this series was a comment from
David Howells:
You need to be very careful doing this. Some userspace stuff
depends on the guard macro names on the kernel header files.
(https://patchwork.kernel.org/patch/
9498275/)
Looking at the code closer, I noticed this is not a problem.
See the following line.
https://github.com/torvalds/linux/blob/v4.16-rc2/scripts/headers_install.sh#L40
scripts/headers_install.sh rips off _UAPI prefix from guard macro names.
I ran "make headers_install" and confirmed the result is what I expect.
So, we can prefix the include guard of include/uapi/linux/const.h,
and add a new include/linux/const.h.
This patch (of 4):
I am going to add include/linux/const.h for the kernel space.
Add _UAPI to the include guard of include/uapi/linux/const.h to
prepare for that.
Please notice the guard name of the exported one will be kept as-is.
So, this commit has no impact to the userspace even if some userspace
stuff depends on the guard macro names.
scripts/headers_install.sh processes exported headers by SED, and
rips off "_UAPI" from guard macro names.
#ifndef _UAPI_LINUX_CONST_H
#define _UAPI_LINUX_CONST_H
will be turned into
#ifndef _LINUX_CONST_H
#define _LINUX_CONST_H
Link: http://lkml.kernel.org/r/1519301715-31798-2-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Tatashin [Tue, 10 Apr 2018 23:36:10 +0000 (16:36 -0700)]
xen, mm: allow deferred page initialization for xen pv domains
Juergen Gross noticed that commit
f7f99100d8d ("mm: stop zeroing memory
during allocation in vmemmap") broke XEN PV domains when deferred struct
page initialization is enabled.
This is because the xen's PagePinned() flag is getting erased from
struct pages when they are initialized later in boot.
Juergen fixed this problem by disabling deferred pages on xen pv
domains. It is desirable, however, to have this feature available as it
reduces boot time. This fix re-enables the feature for pv-dmains, and
fixes the problem the following way:
The fix is to delay setting PagePinned flag until struct pages for all
allocated memory are initialized, i.e. until after free_all_bootmem().
A new x86_init.hyper op init_after_bootmem() is called to let xen know
that boot allocator is done, and hence struct pages for all the
allocated memory are now initialized. If deferred page initialization
is enabled, the rest of struct pages are going to be initialized later
in boot once page_alloc_init_late() is called.
xen_after_bootmem() walks page table's pages and marks them pinned.
Link: http://lkml.kernel.org/r/20180226160112.24724-2-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Juergen Gross <jgross@suse.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Mathias Krause <minipli@googlemail.com>
Cc: Jinbum Park <jinb.park7@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jia Zhang <zhang.jia@linux.alibaba.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Tue, 10 Apr 2018 23:36:05 +0000 (16:36 -0700)]
elf: enforce MAP_FIXED on overlaying elf segments
Anshuman has reported that with "fs, elf: drop MAP_FIXED usage from
elf_map" applied, some ELF binaries in his environment fail to start
with
[ 23.423642] 9148 (sed): Uhuuh, elf segment at
0000000010030000 requested but the memory is mapped already
[ 23.423706] requested [
10030000,
10040000] mapped [
10030000,
10040000] 100073 anon
The reason is that the above binary has overlapping elf segments:
LOAD 0x0000000000000000 0x0000000010000000 0x0000000010000000
0x0000000000013a8c 0x0000000000013a8c R E 10000
LOAD 0x000000000001fd40 0x000000001002fd40 0x000000001002fd40
0x00000000000002c0 0x00000000000005e8 RW 10000
LOAD 0x0000000000020328 0x0000000010030328 0x0000000010030328
0x0000000000000384 0x00000000000094a0 RW 10000
That binary has two RW LOAD segments, the first crosses a page border
into the second
0x1002fd40 (LOAD2-vaddr) + 0x5e8 (LOAD2-memlen) == 0x10030328 (LOAD3-vaddr)
Handle this situation by enforcing MAP_FIXED when we establish a
temporary brk VMA to handle overlapping segments. All other mappings
will still use MAP_FIXED_NOREPLACE.
Link: http://lkml.kernel.org/r/20180213100440.GM3443@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Andrei Vagin <avagin@openvz.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Kees Cook <keescook@chromium.org>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Tue, 10 Apr 2018 23:36:01 +0000 (16:36 -0700)]
fs, elf: drop MAP_FIXED usage from elf_map
Both load_elf_interp and load_elf_binary rely on elf_map to map segments
on a controlled address and they use MAP_FIXED to enforce that. This is
however dangerous thing prone to silent data corruption which can be
even exploitable.
Let's take CVE-2017-
1000253 as an example. At the time (before commit
eab09532d400: "binfmt_elf: use ELF_ET_DYN_BASE only for PIE")
ELF_ET_DYN_BASE was at TASK_SIZE / 3 * 2 which is not that far away from
the stack top on 32b (legacy) memory layout (only 1GB away). Therefore
we could end up mapping over the existing stack with some luck.
The issue has been fixed since then (
a87938b2e246: "fs/binfmt_elf.c: fix
bug in loading of PIE binaries"), ELF_ET_DYN_BASE moved moved much
further from the stack (
eab09532d400 and later by
c715b72c1ba4: "mm:
revert x86_64 and arm64 ELF_ET_DYN_BASE base changes") and excessive
stack consumption early during execve fully stopped by
da029c11e6b1
("exec: Limit arg stack to at most 75% of _STK_LIM"). So we should be
safe and any attack should be impractical. On the other hand this is
just too subtle assumption so it can break quite easily and hard to
spot.
I believe that the MAP_FIXED usage in load_elf_binary (et. al) is still
fundamentally dangerous. Moreover it shouldn't be even needed. We are
at the early process stage and so there shouldn't be unrelated mappings
(except for stack and loader) existing so mmap for a given address should
succeed even without MAP_FIXED. Something is terribly wrong if this is
not the case and we should rather fail than silently corrupt the
underlying mapping.
Address this issue by changing MAP_FIXED to the newly added
MAP_FIXED_NOREPLACE. This will mean that mmap will fail if there is an
existing mapping clashing with the requested one without clobbering it.
[mhocko@suse.com: fix build]
[akpm@linux-foundation.org: coding-style fixes]
[avagin@openvz.org: don't use the same value for MAP_FIXED_NOREPLACE and MAP_SYNC]
Link: http://lkml.kernel.org/r/20171218184916.24445-1-avagin@openvz.org
Link: http://lkml.kernel.org/r/20171213092550.2774-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Tue, 10 Apr 2018 23:35:57 +0000 (16:35 -0700)]
mm: introduce MAP_FIXED_NOREPLACE
Patch series "mm: introduce MAP_FIXED_NOREPLACE", v2.
This has started as a follow up discussion [3][4] resulting in the
runtime failure caused by hardening patch [5] which removes MAP_FIXED
from the elf loader because MAP_FIXED is inherently dangerous as it
might silently clobber an existing underlying mapping (e.g. stack).
The reason for the failure is that some architectures enforce an
alignment for the given address hint without MAP_FIXED used (e.g. for
shared or file backed mappings).
One way around this would be excluding those archs which do alignment
tricks from the hardening [6]. The patch is really trivial but it has
been objected, rightfully so, that this screams for a more generic
solution. We basically want a non-destructive MAP_FIXED.
The first patch introduced MAP_FIXED_NOREPLACE which enforces the given
address but unlike MAP_FIXED it fails with EEXIST if the given range
conflicts with an existing one. The flag is introduced as a completely
new one rather than a MAP_FIXED extension because of the backward
compatibility. We really want a never-clobber semantic even on older
kernels which do not recognize the flag. Unfortunately mmap sucks
wrt flags evaluation because we do not EINVAL on unknown flags. On
those kernels we would simply use the traditional hint based semantic so
the caller can still get a different address (which sucks) but at least
not silently corrupt an existing mapping. I do not see a good way
around that. Except we won't export expose the new semantic to the
userspace at all.
It seems there are users who would like to have something like that.
Jemalloc has been mentioned by Michael Ellerman [7]
Florian Weimer has mentioned the following:
: glibc ld.so currently maps DSOs without hints. This means that the kernel
: will map right next to each other, and the offsets between them a completely
: predictable. We would like to change that and supply a random address in a
: window of the address space. If there is a conflict, we do not want the
: kernel to pick a non-random address. Instead, we would try again with a
: random address.
John Hubbard has mentioned CUDA example
: a) Searches /proc/<pid>/maps for a "suitable" region of available
: VA space. "Suitable" generally means it has to have a base address
: within a certain limited range (a particular device model might
: have odd limitations, for example), it has to be large enough, and
: alignment has to be large enough (again, various devices may have
: constraints that lead us to do this).
:
: This is of course subject to races with other threads in the process.
:
: Let's say it finds a region starting at va.
:
: b) Next it does:
: p = mmap(va, ...)
:
: *without* setting MAP_FIXED, of course (so va is just a hint), to
: attempt to safely reserve that region. If p != va, then in most cases,
: this is a failure (almost certainly due to another thread getting a
: mapping from that region before we did), and so this layer now has to
: call munmap(), before returning a "failure: retry" to upper layers.
:
: IMPROVEMENT: --> if instead, we could call this:
:
: p = mmap(va, ... MAP_FIXED_NOREPLACE ...)
:
: , then we could skip the munmap() call upon failure. This
: is a small thing, but it is useful here. (Thanks to Piotr
: Jaroszynski and Mark Hairgrove for helping me get that detail
: exactly right, btw.)
:
: c) After that, CUDA suballocates from p, via:
:
: q = mmap(sub_region_start, ... MAP_FIXED ...)
:
: Interestingly enough, "freeing" is also done via MAP_FIXED, and
: setting PROT_NONE to the subregion. Anyway, I just included (c) for
: general interest.
Atomic address range probing in the multithreaded programs in general
sounds like an interesting thing to me.
The second patch simply replaces MAP_FIXED use in elf loader by
MAP_FIXED_NOREPLACE. I believe other places which rely on MAP_FIXED
should follow. Actually real MAP_FIXED usages should be docummented
properly and they should be more of an exception.
[1] http://lkml.kernel.org/r/
20171116101900.13621-1-mhocko@kernel.org
[2] http://lkml.kernel.org/r/
20171129144219.22867-1-mhocko@kernel.org
[3] http://lkml.kernel.org/r/
20171107162217.
382cd754@canb.auug.org.au
[4] http://lkml.kernel.org/r/
1510048229.12079.7.camel@abdul.in.ibm.com
[5] http://lkml.kernel.org/r/
20171023082608.6167-1-mhocko@kernel.org
[6] http://lkml.kernel.org/r/
20171113094203.aofz2e7kueitk55y@dhcp22.suse.cz
[7] http://lkml.kernel.org/r/87efp1w7vy.fsf@concordia.ellerman.id.au
This patch (of 2):
MAP_FIXED is used quite often to enforce mapping at the particular range.
The main problem of this flag is, however, that it is inherently dangerous
because it unmaps existing mappings covered by the requested range. This
can cause silent memory corruptions. Some of them even with serious
security implications. While the current semantic might be really
desiderable in many cases there are others which would want to enforce the
given range but rather see a failure than a silent memory corruption on a
clashing range. Please note that there is no guarantee that a given range
is obeyed by the mmap even when it is free - e.g. arch specific code is
allowed to apply an alignment.
Introduce a new MAP_FIXED_NOREPLACE flag for mmap to achieve this
behavior. It has the same semantic as MAP_FIXED wrt. the given address
request with a single exception that it fails with EEXIST if the requested
address is already covered by an existing mapping. We still do rely on
get_unmaped_area to handle all the arch specific MAP_FIXED treatment and
check for a conflicting vma after it returns.
The flag is introduced as a completely new one rather than a MAP_FIXED
extension because of the backward compatibility. We really want a
never-clobber semantic even on older kernels which do not recognize the
flag. Unfortunately mmap sucks wrt. flags evaluation because we do not
EINVAL on unknown flags. On those kernels we would simply use the
traditional hint based semantic so the caller can still get a different
address (which sucks) but at least not silently corrupt an existing
mapping. I do not see a good way around that.
[mpe@ellerman.id.au: fix whitespace]
[fail on clashing range with EEXIST as per Florian Weimer]
[set MAP_FIXED before round_hint_to_min as per Khalid Aziz]
Link: http://lkml.kernel.org/r/20171213092550.2774-2-mhocko@kernel.org
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Jason Evans <jasone@google.com>
Cc: David Goldblatt <davidtgoldblatt@gmail.com>
Cc: Edward Tomasz Napierała <trasz@FreeBSD.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 10 Apr 2018 23:35:53 +0000 (16:35 -0700)]
MAINTAINERS: update bouncing aacraid@adaptec.com addresses
Adaptec is now part of Microsemi.
Commit
2a81ffdd9da1 ("MAINTAINERS: Update email address for aacraid")
updated only one of the driver maintainer addresses.
Update the other two sections as the aacraid@adaptec.com address
bounces.
Link: http://lkml.kernel.org/r/1522103936.12357.27.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nikolay Borisov [Tue, 10 Apr 2018 23:35:49 +0000 (16:35 -0700)]
fs/dcache.c: add cond_resched() in shrink_dentry_list()
As previously reported (https://patchwork.kernel.org/patch/
8642031/)
it's possible to call shrink_dentry_list with a large number of dentries
(> 10000). This, in turn, could trigger the softlockup detector and
possibly trigger a panic. In addition to the unmount path being
vulnerable to this scenario, at SuSE we've observed similar situation
happening during process exit on processes that touch a lot of dentries.
Here is an excerpt from a crash dump. The number after the colon are
the number of dentries on the list passed to shrink_dentry_list:
PID 99760: 10722
PID 107530: 215
PID 108809: 24134
PID 108877: 21331
PID 141708: 16487
So we want to kill between 15k-25k dentries without yielding.
And one possible call stack looks like:
4 [
ffff8839ece41db0] _raw_spin_lock at
ffffffff8152a5f8
5 [
ffff8839ece41db0] evict at
ffffffff811c3026
6 [
ffff8839ece41dd0] __dentry_kill at
ffffffff811bf258
7 [
ffff8839ece41df0] shrink_dentry_list at
ffffffff811bf593
8 [
ffff8839ece41e18] shrink_dcache_parent at
ffffffff811bf830
9 [
ffff8839ece41e50] proc_flush_task at
ffffffff8120dd61
10 [
ffff8839ece41ec0] release_task at
ffffffff81059ebd
11 [
ffff8839ece41f08] do_exit at
ffffffff8105b8ce
12 [
ffff8839ece41f78] sys_exit at
ffffffff8105bd53
13 [
ffff8839ece41f80] system_call_fastpath at
ffffffff81532909
While some of the callers of shrink_dentry_list do use cond_resched,
this is not sufficient to prevent softlockups. So just move
cond_resched into shrink_dentry_list from its callers.
David said: I've found hundreds of occurrences of warnings that we emit
when need_resched stays set for a prolonged period of time with the
stack trace that is included in the change log.
Link: http://lkml.kernel.org/r/1521718946-31521-1-git-send-email-nborisov@suse.com
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Valentin Vidic [Tue, 10 Apr 2018 23:35:46 +0000 (16:35 -0700)]
include/linux/kfifo.h: fix comment
Clean up unusual formatting in the note about locking.
Link: http://lkml.kernel.org/r/20180324002630.13046-1-Valentin.Vidic@CARNet.hr
Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Sean Young <sean@mess.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Tue, 10 Apr 2018 23:35:42 +0000 (16:35 -0700)]
ipc/shm.c: shm_split(): remove unneeded test for NULL shm_file_data.vm_ops
This was added by the recent "ipc/shm.c: add split function to
shm_vm_ops", but it is not necessary.
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Waiman Long [Tue, 10 Apr 2018 23:35:38 +0000 (16:35 -0700)]
kernel/sysctl.c: add kdoc comments to do_proc_do{u}intvec_minmax_conv_param
Kdoc comments are added to the do_proc_dointvec_minmax_conv_param and
do_proc_douintvec_minmax_conv_param structures thare are used internally
for range checking.
The error codes returned by proc_dointvec_minmax() and
proc_douintvec_minmax() are also documented.
Link: http://lkml.kernel.org/r/1519926220-7453-3-git-send-email-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Waiman Long [Tue, 10 Apr 2018 23:35:35 +0000 (16:35 -0700)]
fs/proc/proc_sysctl.c: fix typo in sysctl_check_table_array()
Patch series "ipc: Clamp *mni to the real IPCMNI limit", v3.
The sysctl parameters msgmni, shmmni and semmni have an inherent limit
of IPC_MNI (32k). However, users may not be aware of that because they
can write a value much higher than that without getting any error or
notification. Reading the parameters back will show the newly written
values which are not real.
Enforcing the limit by failing sysctl parameter write, however, can
break existing user applications. To address this delemma, a new flags
field is introduced into the ctl_table. The value CTL_FLAGS_CLAMP_RANGE
can be added to any ctl_table entries to enable a looser range clamping
without returning any error. For example,
.flags = CTL_FLAGS_CLAMP_RANGE,
This flags value are now used for the range checking of shmmni, msgmni
and semmni without breaking existing applications. If any out of range
value is written to those sysctl parameters, the following warning will
be printed instead.
Kernel parameter "shmmni" was set out of range [0, 32768], clamped to 32768.
Reading the values back will show 32768 instead of some fake values.
This patch (of 6):
Fix a typo.
Link: http://lkml.kernel.org/r/1519926220-7453-2-git-send-email-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Tue, 10 Apr 2018 23:35:30 +0000 (16:35 -0700)]
ipc/msg: introduce msgctl(MSG_STAT_ANY)
There is a permission discrepancy when consulting msq ipc object
metadata between /proc/sysvipc/msg (0444) and the MSG_STAT shmctl
command. The later does permission checks for the object vs S_IRUGO.
As such there can be cases where EACCESS is returned via syscall but the
info is displayed anyways in the procfs files.
While this might have security implications via info leaking (albeit no
writing to the msq metadata), this behavior goes way back and showing
all the objects regardless of the permissions was most likely an
overlook - so we are stuck with it. Furthermore, modifying either the
syscall or the procfs file can cause userspace programs to break (ie
ipcs). Some applications require getting the procfs info (without root
privileges) and can be rather slow in comparison with a syscall -- up to
500x in some reported cases for shm.
This patch introduces a new MSG_STAT_ANY command such that the msq ipc
object permissions are ignored, and only audited instead. In addition,
I've left the lsm security hook checks in place, as if some policy can
block the call, then the user has no other choice than just parsing the
procfs file.
Link: http://lkml.kernel.org/r/20180215162458.10059-4-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Robert Kettler <robert.kettler@outlook.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Tue, 10 Apr 2018 23:35:26 +0000 (16:35 -0700)]
ipc/sem: introduce semctl(SEM_STAT_ANY)
There is a permission discrepancy when consulting shm ipc object
metadata between /proc/sysvipc/sem (0444) and the SEM_STAT semctl
command. The later does permission checks for the object vs S_IRUGO.
As such there can be cases where EACCESS is returned via syscall but the
info is displayed anyways in the procfs files.
While this might have security implications via info leaking (albeit no
writing to the sma metadata), this behavior goes way back and showing
all the objects regardless of the permissions was most likely an
overlook - so we are stuck with it. Furthermore, modifying either the
syscall or the procfs file can cause userspace programs to break (ie
ipcs). Some applications require getting the procfs info (without root
privileges) and can be rather slow in comparison with a syscall -- up to
500x in some reported cases for shm.
This patch introduces a new SEM_STAT_ANY command such that the sem ipc
object permissions are ignored, and only audited instead. In addition,
I've left the lsm security hook checks in place, as if some policy can
block the call, then the user has no other choice than just parsing the
procfs file.
Link: http://lkml.kernel.org/r/20180215162458.10059-3-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Robert Kettler <robert.kettler@outlook.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Tue, 10 Apr 2018 23:35:23 +0000 (16:35 -0700)]
ipc/shm: introduce shmctl(SHM_STAT_ANY)
Patch series "sysvipc: introduce STAT_ANY commands", v2.
The following patches adds the discussed (see [1]) new command for shm
as well as for sems and msq as they are subject to the same
discrepancies for ipc object permission checks between the syscall and
via procfs. These new commands are justified in that (1) we are stuck
with this semantics as changing syscall and procfs can break userland;
and (2) some users can benefit from performance (for large amounts of
shm segments, for example) from not having to parse the procfs
interface.
Once merged, I will submit the necesary manpage updates. But I'm thinking
something like:
: diff --git a/man2/shmctl.2 b/man2/shmctl.2
: index
7bb503999941..
bb00bbe21a57 100644
: --- a/man2/shmctl.2
: +++ b/man2/shmctl.2
: @@ -41,6 +41,7 @@
: .\" 2005-04-25, mtk -- noted aberrant Linux behavior w.r.t. new
: .\" attaches to a segment that has already been marked for deletion.
: .\" 2005-08-02, mtk: Added IPC_INFO, SHM_INFO, SHM_STAT descriptions.
: +.\" 2018-02-13, dbueso: Added SHM_STAT_ANY description.
: .\"
: .TH SHMCTL 2 2017-09-15 "Linux" "Linux Programmer's Manual"
: .SH NAME
: @@ -242,6 +243,18 @@ However, the
: argument is not a segment identifier, but instead an index into
: the kernel's internal array that maintains information about
: all shared memory segments on the system.
: +.TP
: +.BR SHM_STAT_ANY " (Linux-specific)"
: +Return a
: +.I shmid_ds
: +structure as for
: +.BR SHM_STAT .
: +However, the
: +.I shm_perm.mode
: +is not checked for read access for
: +.IR shmid ,
: +resembing the behaviour of
: +/proc/sysvipc/shm.
: .PP
: The caller can prevent or allow swapping of a shared
: memory segment with the following \fIcmd\fP values:
: @@ -287,7 +300,7 @@ operation returns the index of the highest used entry in the
: kernel's internal array recording information about all
: shared memory segments.
: (This information can be used with repeated
: -.B SHM_STAT
: +.B SHM_STAT/SHM_STAT_ANY
: operations to obtain information about all shared memory segments
: on the system.)
: A successful
: @@ -328,7 +341,7 @@ isn't accessible.
: \fIshmid\fP is not a valid identifier, or \fIcmd\fP
: is not a valid command.
: Or: for a
: -.B SHM_STAT
: +.B SHM_STAT/SHM_STAT_ANY
: operation, the index value specified in
: .I shmid
: referred to an array slot that is currently unused.
This patch (of 3):
There is a permission discrepancy when consulting shm ipc object metadata
between /proc/sysvipc/shm (0444) and the SHM_STAT shmctl command. The
later does permission checks for the object vs S_IRUGO. As such there can
be cases where EACCESS is returned via syscall but the info is displayed
anyways in the procfs files.
While this might have security implications via info leaking (albeit no
writing to the shm metadata), this behavior goes way back and showing all
the objects regardless of the permissions was most likely an overlook - so
we are stuck with it. Furthermore, modifying either the syscall or the
procfs file can cause userspace programs to break (ie ipcs). Some
applications require getting the procfs info (without root privileges) and
can be rather slow in comparison with a syscall -- up to 500x in some
reported cases.
This patch introduces a new SHM_STAT_ANY command such that the shm ipc
object permissions are ignored, and only audited instead. In addition,
I've left the lsm security hook checks in place, as if some policy can
block the call, then the user has no other choice than just parsing the
procfs file.
[1] https://lkml.org/lkml/2017/12/19/220
Link: http://lkml.kernel.org/r/20180215162458.10059-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Robert Kettler <robert.kettler@outlook.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Wilson [Tue, 10 Apr 2018 23:35:18 +0000 (16:35 -0700)]
kernel/params.c: downgrade warning for unsafe parameters
As using an unsafe module parameter is, by its very definition, an
expected user action, emitting a warning is overkill. Nothing has yet
gone wrong, and we add a taint flag for any future oops should something
actually go wrong. So instead of having a user controllable pr_warn,
downgrade it to a pr_notice for "a normal, but significant condition".
We make use of unsafe kernel parameters in igt
(https://cgit.freedesktop.org/drm/igt-gpu-tools/) (we have not yet
succeeded in removing all such debugging options), which generates a
warning and taints the kernel. The warning is unhelpful as we then need
to filter it out again as we check that every test themselves do not
provoke any kernel warnings.
Link: http://lkml.kernel.org/r/20180226151919.9674-1-chris@chris-wilson.co.uk
Fixes:
91f9d330cc14 ("module: make it possible to have unsafe, tainting module params")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Petri Latvala <petri.latvala@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-2.6-microblaze.git / log