Merge tag 'at91-dt-5.20-3' of git://git./linux/kernel/git/at91/linux into arm/dt

AT91 DT for v5.20 #3

It contains updates for LAN966X devices as follows:
- clock gating support
- gpio restart and network switch for lan966x-pcb8291 board

* tag 'at91-dt-5.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: lan966x: Enable network driver on pcb8291
  ARM: dts: lan966x: Disable can0 on pcb8291
  ARM: dts: lan966x: Add gpio-restart
  ARM: dts: lan966x: add clock gating register

Link: https://lore.kernel.org/r/20220722152041.1752962-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: dts: lan966x: Enable network driver on pcb8291

The pcb8291 has 2 ports that are connected to the internal ports
of the switch. Enable them in DT.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
[claudiu.beznea: moved status ="okay" at the end for port0 and port1]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220719201158.1696168-4-horatiu.vultur@microchip.com

ARM: dts: lan966x: Disable can0 on pcb8291

On pcb8291, can0 and the network driver share some of the GPIOs so only
1 device can be active. Therefore disable can0 as we want to enable the
network driver.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220719201158.1696168-3-horatiu.vultur@microchip.com

ARM: dts: lan966x: Add gpio-restart

The pcb8291 can be rebooted by toggling the GPIO 56. Therefore enable
this in DT.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220719201158.1696168-2-horatiu.vultur@microchip.com

Merge tag 'qcom-arm64-for-5.20-2' of git://git./linux/kernel/git/qcom/linux into arm/dt

More Qualcomm ARM64 DTS updates for v5.20

Related to SDM845, the Xiaomi Mi Mix2s is introduced, the DB845c on
SDM845 gains support for the second GPI DMA controller and has the GENI
I2C and SPI instances wired up to their respective GPI DMA controller.

QCS404 USB controller and PHY assignment is corrected and IPQ8074 gains
APCS definition to handle outgoing IPC interrupts.

Lastly a range of Devicetree validation issues are addressed.

* tag 'qcom-arm64-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (53 commits)
  arm64: dts: qcom: Add support for Xiaomi Mi Mix2s
  dt-bindings: arm: qcom: Add Xiaomi Mi Mix2s bindings
  dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices
  dt-bindings: arm: qcom: add missing SM6350 board compatibles
  dt-bindings: arm: qcom: add missing SM6125 board compatibles
  dt-bindings: arm: qcom: add missing SDM845 board compatibles
  dt-bindings: arm: qcom: add missing SDM636 board compatibles
  dt-bindings: arm: qcom: add missing SDM630 board compatibles
  dt-bindings: arm: qcom: add missing QCS404 board compatibles
  dt-bindings: arm: qcom: add missing MSM8992 board compatibles
  dt-bindings: arm: qcom: add missing MSM8998 board compatibles
  dt-bindings: vendor-prefixes: add Shift GmbH
  dt-bindings: arm: qcom: add missing SM8350 board compatibles
  dt-bindings: arm: qcom: add missing SM8250 board compatibles
  dt-bindings: arm: qcom: add missing SM8150 board compatibles
  dt-bindings: arm: qcom: add missing MSM8994 board compatibles
  dt-bindings: arm: qcom: add missing MSM8916 board compatibles
  dt-bindings: arm: qcom: fix MSM8994 boards compatibles
  dt-bindings: arm: qcom: fix MSM8916 MTP compatibles
  dt-bindings: arm: qcom: fix Longcheer L8150 compatibles
  ...

Link: https://lore.kernel.org/r/20220720231643.2114565-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-dts-for-5.20-2' of git://git./linux/kernel/git/qcom/linux into arm/dt

More Qualcomm DTS updates for v5.20

This adds an additional GSBI, hwclock, smem and tsens nodes for IPQ8064,
in addition to fixing up and improving the existing descriptions of the
platform.

USB interrupts are reordered to please the Devicetree binding.

The Light Pulse Generator is defined for PM8941 and LEDs are defined for
the FairPhone2, Nexus 5 and Sony Xperia devices.

* tag 'qcom-dts-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: dts: qcom: add rpmcc missing clocks for apq/ipq8064 and msm8660
  ARM: dts: qcom: msm8974: Disable remoteprocs by default
  ARM: dts: qcom: ipq8064: add missing smem compatible
  ARM: dts: qcom: ipq8064: add missing hwlock
  ARM: dts: qcom: ipq8064: add speedbin efuse nvmem node
  ARM: dts: qcom: ipq8064: fix and add some missing gsbi node
  ARM: dts: qcom: ipq8064: reduce pci IO size to 64K
  ARM: dts: qcom: ipq8064: disable usb phy by default
  ARM: dts: qcom: ipq8064: add missing snps,dwmac compatible for gmac
  ARM: dts: qcom: ipq8064: add specific dtsi with smb208 rpm regulators
  ARM: dts: qcom: ipq8064: add gsbi6 missing definition
  ARM: dts: qcom: ipq8064: add multiple missing pin definition
  ARM: dts: qcom: msm8974-hammerhead: Add notification LED
  ARM: dts: qcom: msm8974-FP2: Add notification LED
  ARM: dts: qcom: msm8974-sony: Enable LPG
  ARM: dts: qcom: Add LPG node to pm8941
  ARM: dts: qcom: sdx65: reorder USB interrupts
  ARM: dts: qcom: apq8064: create tsens device node

Link: https://lore.kernel.org/r/20220720231111.2114025-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'dt-bindings-aspeed-5.20' of git://git./linux/kernel/git/krzk/linux-dt into arm/dt

Devicetree bindings for Aspeed boards

1. Document the compatibles of existing Aspeed-based boards.
2. Add jabil,rbp-bmc compatible.

* tag 'dt-bindings-aspeed-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
  dt-bindings: arm: aspeed: add Aspeed Evaluation boards
  dt-bindings: arm: aspeed: document board compatibles
  dt-bindings: arm: aspeed: document board compatibles

Link: https://lore.kernel.org/r/20220721072415.11424-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

dt-bindings: arm: aspeed: add Aspeed Evaluation boards

Document the new compatibles used on Aspeed Evaluation boards.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220529104928.79636-3-krzysztof.kozlowski@linaro.org

arm64: dts: qcom: Add support for Xiaomi Mi Mix2s

Add support for Xiaomi Mi Mix2s (polaris) handsets.

Currently working features:
- UFS
- Touchscreen
- USB 2
- Bluetooth
- Wi-Fi
- GPU
- Venus
- Display (need jdi-fhd-nt35596s panel driver, which I have sent a
  patch but it haven't been into upstream yet)

Signed-off-by: Molly Sophia <mollysophia379@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220712145139.9473-2-mollysophia379@gmail.com

dt-bindings: arm: qcom: Add Xiaomi Mi Mix2s bindings

Add documentation for "xiaomi,polaris" device.

Signed-off-by: Molly Sophia <mollysophia379@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220712145139.9473-1-mollysophia379@gmail.com

dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices

Add binding documentation for the LG G7 and LG V35 smartphones
which are based on Snapdragon 845 (sdm845).

Signed-off-by: Stefan Hansson <newbie13xd@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220626164536.16011-1-newbie13xd@gmail.com

dt-bindings: arm: qcom: add missing SM6350 board compatibles

Document board compatibles already present in Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220521164550.91115-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: add missing SM6125 board compatibles

Document board compatibles already present in Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220521164550.91115-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: add missing SDM845 board compatibles

Document board compatibles already present in Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220521164550.91115-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: add missing SDM636 board compatibles

Document board compatibles already present in Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220521164550.91115-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: add missing SDM630 board compatibles

Document board compatibles already present in Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220521164550.91115-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: add missing QCS404 board compatibles

Document board compatibles already present in Linux kernel.

In itself this resulted in a dt_binding_check in qcom-cpufrq-nvmem.yaml,
which was reported by Rob, solved in below change by Krzysztof and acked
by Viresh. The fix is squashed into this to avoid bisect problems.
Link: https://lore.kernel.org/r/20220627143340.477120-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220521164550.91115-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: add missing MSM8992 board compatibles

Document board compatibles already present in Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220521164550.91115-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: add missing MSM8998 board compatibles

Document board compatibles already present in Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220521164550.91115-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: vendor-prefixes: add Shift GmbH

Add prefix for SHIFT GmbH, phone manufacturer
(https://www.shiftphones.com/en/).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220521164550.91115-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: add missing SM8350 board compatibles

Document several board compatibles already present in Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220520123252.365762-9-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: add missing SM8250 board compatibles

Document several board compatibles already present in Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220520123252.365762-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: add missing SM8150 board compatibles

Document several board compatibles already present in Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220520123252.365762-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: add missing MSM8994 board compatibles

Document several board compatibles already present in Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220520123252.365762-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: add missing MSM8916 board compatibles

Document several board compatibles already present in Linux kernel.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20220520123252.365762-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: fix MSM8994 boards compatibles

The compatibles for APQ8094/MSM8994 boards are different than specified
in bindings.  None of them use fallback to other SoC variant.

Fixes: 9ad3c08f6f1b ("dt-bindings: arm: qcom: Document sony boards for apq8094")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220520123252.365762-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: fix MSM8916 MTP compatibles

The order of compatibles for MSM8916 MTP board is different:

  msm8916-mtp.dtb: /: compatible: 'oneOf' conditional failed, one must be fixed:
    ['qcom,msm8916-mtp', 'qcom,msm8916-mtp/1', 'qcom,msm8916'] is too long

Fixes: 9d3ef77fe568 ("dt-bindings: arm: Convert QCom board/soc bindings to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220520123252.365762-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: fix Longcheer L8150 compatibles

The MSM8916 Longcheer L8150 uses a fallback in compatible:

  msm8916-longcheer-l8150.dtb: /: compatible: 'oneOf' conditional failed, one must be fixed:
    ['longcheer,l8150', 'qcom,msm8916-v1-qrd/9-v1', 'qcom,msm8916'] is too long

Fixes: b72160fa886d ("dt-bindings: qcom: Document bindings for new MSM8916 devices")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20220520123252.365762-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: fix Alcatel OneTouch Idol 3 compatibles

The MSM8916 Alcatel OneTouch Idol 3 does not use MTP fallbacks in
compatibles:

  msm8916-alcatel-idol347.dtb: /: compatible: 'oneOf' conditional failed, one must be fixed:
    ['alcatel,idol347', 'qcom,msm8916'] is too short

Reported-by: Rob Herring <robh@kernel.org>
Fixes: e9dd2f7204ed ("dt-bindings: arm: qcom: Document alcatel,idol347 board")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20220520123252.365762-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

ARM: dts: lan966x: add clock gating register

The clock controller supports an optional clock gating register. This is
necessary to expose the USB device clock, for example. Add it.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220707132500.1708020-1-michael@walle.cc

arm64: dts: qcom: qrb5165-rb5: Fix 'dtbs_check' error for led nodes

make dtbs_check currently reports the following errors
with qrb5165-rb5 led nodes:

arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb:
 leds: 'bt', 'user4', 'wlan' do not match any of the regexes:
  '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'

Fix the same.

Also while at it, fix a blank line issue in the led
node.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220719205058.1004942-3-bhupesh.sharma@linaro.org

arm64: dts: qcom: qrb5165-rb5: Fix 'dtbs_check' error for lpg nodes

make dtbs_check currently reports the following warnings
with qrb5165-rb5 lpg nodes:

arch/arm64/boot/dts/qcom/qrb5165-rb5.dts:
 Warning (reg_format): /soc@0/spmi@c440000/pmic@5/lpg/led@1:reg:
  property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts:
 Warning (avoid_default_addr_size): /soc@0/spmi@c440000/pmic@5/lpg/led@1:
  Relying on default #address-cells value

Fix the same.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220719205058.1004942-2-bhupesh.sharma@linaro.org

ARM: dts: aspeed: centriq2400: drop the board

The board is unmaintained and unused, according to Joel, so simply let's
remove it.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/CACPK8XfxXi8kQr+vxta8rD6SBgxLf_oBjAH0UkPBacQta552YQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20220623072428.33697-1-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'mvebu-dt64-5.20-1' of git://git./linux/kernel/git/gclement/mvebu into arm/dt

mvebu dt64 for 5.20 (part 1)

Add support for Marvell 98DX2530 (and variants)

* tag 'mvebu-dt64-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  arm64: marvell: enable the 98DX2530 pinctrl driver
  arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board
  dt-bindings: marvell: Document the AC5/AC5X compatibles

Link: https://lore.kernel.org/r/87cze1qlg3.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arm64: marvell: enable the 98DX2530 pinctrl driver

This commit makes sure the drivers for the 98DX2530 pin controller is
enabled.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board

The 98DX2530 SoC is the Control and Management CPU integrated into
the Marvell 98DX25xx and 98DX35xx series of switch chip (internally
referred to as AlleyCat5 and AlleyCat5X).

These files have been taken from the Marvell SDK and lightly cleaned
up with the License and copyright retained.

gregory.clement: use specific cpu type: cortex-a55 instead of armv8 in
cpu nodes, armv8 being reserved for the arm virtual models that are
not meant to implement a particular CPU type.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Merge tag 'mvebu-dt-5.20-1' of git://git./linux/kernel/git/gclement/mvebu into arm/dt

mvebu dt for 5.20 (part 1)

Enable LED to link/activity on turris-omnia (Armada 385 based)

* tag 'mvebu-dt-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
  ARM: dts: turris-omnia: enable LED controller node
  ARM: dts: turris-omnia: configure LED[0] pin function to link/activity

Link: https://lore.kernel.org/r/87lespqn28.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arm64: dts: qcom: sdm845-db845c: Specify a i2c bus clocks

The kernel log contains complaints about i2c11 and i2c14 lacking
clock-frequency, specify a reasonable value to suppress this warning.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220717034403.2135027-4-bjorn.andersson@linaro.org

arm64: dts: qcom: sdm845-db845c: Enable gpi_dma1

Enable gpi_dma1 so that i2c14 is able to find its DMA controller.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220717034403.2135027-3-bjorn.andersson@linaro.org

arm64: dts: qcom: sdm845: Fill in GENI DMA references

The I2C and SPI might be configured in GPI DMA mode, fill in the
properties needed for this.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220717034403.2135027-2-bjorn.andersson@linaro.org

ARM: dts: qcom: add rpmcc missing clocks for apq/ipq8064 and msm8660

Add missing rpmcc pxo and cxo clock for apq8064, ipq8064 and
msm8660 dtsi.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706225321.26215-3-ansuelsmth@gmail.com

arm64: dts: qcom: sc7280: delete vdda-1p2 and vdda-0p9 from both dp and edp

Both vdda-1p2-supply and vdda-0p9-supply regulators are controlled
by dp combo phy. Therefore remove them from dp controller.

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657556603-15024-1-git-send-email-quic_khsieh@quicinc.com

arm64: dts: sdm850: Remove unnecessary turbo-mode

qcom-cpufreq-hw finds turbo-mode in the LUT hardware tables
and slaps the flag on the last element, so there's no reason
to add it in the dts, so remove it.

Signed-off-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220718230109.8193-1-steev@kali.org

arm64: dts: qcom: sc8280xp: add missing 300MHz

When booting a Thinkpad x13s, we see the message

[    0.997647] cpu cpu0: failed to update OPP for freq=300000

So, lets add in 300MHz to make it happy

Signed-off-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220718225714.8074-1-steev@kali.org

dt-bindings: marvell: Document the AC5/AC5X compatibles

Describe the compatible properties for the Marvell Alleycat5/5X switches
with integrated CPUs.

Alleycat5:
* 98DX2538: 24x1G + 2x10G + 2x10G Stack
* 98DX2535: 24x1G + 4x1G Stack
* 98DX2532: 8x1G + 2x10G + 2x1G Stack
* 98DX2531: 8x1G + 4x1G Stack
* 98DX2528: 24x1G + 2x10G + 2x10G Stack
* 98DX2525: 24x1G + 4x1G Stack
* 98DX2522: 8x1G + 2x10G + 2x1G Stack
* 98DX2521: 8x1G + 4x1G Stack
* 98DX2518: 24x1G + 2x10G + 2x10G Stack
* 98DX2515: 24x1G + 4x1G Stack
* 98DX2512: 8x1G + 2x10G + 2x1G Stack
* 98DX2511: 8x1G + 4x1G Stack

Alleycat5X:
* 98DX3500: 24x1G + 6x25G
* 98DX3501: 16x1G + 6x10G
* 98DX3510: 48x1G + 6x25G
* 98DX3520: 24x2.5G + 6x25G
* 98DX3530: 48x2.5G + 6x25G
* 98DX3540: 12x5G/6x10G + 6x25G
* 98DX3550: 24x5G/12x10G + 6x25G

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

ARM: dts: turris-omnia: enable LED controller node

The LED controller node is disabled because the leds-turris-omnia driver
does not support setting the LED blinking to be controlled by the MCU.

The patches for that have now been sent [1], so let's enable the node.

[1] https://lore.kernel.org/linux-leds/20220704105955.15474-1-kabel@kernel.org/T/

Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

ARM: dts: turris-omnia: configure LED[0] pin function to link/activity

The marvell PHY driver changes the LED[0] pin function to "On - 1000
Mbps Link, Off - Else".

Turris Omnia expects that the function is "On - Link, Blink - Activity,
Off - No link".

Use the `marvell,reg-init` DT property to change the function.

In the future, once netdev trigger will support HW offloading, we will
be able to have this configured via the combination of PHY driver and
leds-turris-omnia driver.

Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

ARM: dts: qcom: msm8974: Disable remoteprocs by default

The remoteproc configuration in qcom-msm8974.dtsi is incomplete because
it lacks the regulator supplies that should be added in the board DT
files. Some of the msm8974 boards are currently missing the regulator
supplies and should have the remoteprocs disabled to avoid making use
of the incomplete configuration.

This also fixes dtbs_check warnings after moving "qcom,msm8974-mss-pil"
to DT schema, which rightfully complains that the -supply properties
are missing for some boards:

qcom-apq8074-dragonboard.dtb:
remoteproc@fc880000: 'pll-supply' is a required property
        From schema: remoteproc/qcom,msm8916-mss-pil.yaml
remoteproc@fc880000: 'mss-supply' is a required property
        From schema: remoteproc/qcom,msm8916-mss-pil.yaml
remoteproc@fc880000: 'oneOf' conditional failed, one must be fixed:
        'power-domains' is a required property
        'power-domain-names' is a required property, or
        'cx-supply' is a required property
        'mx-supply' is a required property

Cc: Luca Weiss <luca@z3ntu.xyz>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Fixes: f300826d27be ("ARM: dts: qcom-msm8974: Sort and clean up nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220712124421.3129206-4-stephan.gerhold@kernkonzept.com

ARM: dts: qcom: ipq8064: add missing smem compatible

Add missing smem compatible and hwlocks phandle for ipq8064 dtsi
smem node.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707102040.1859-3-ansuelsmth@gmail.com

ARM: dts: qcom: ipq8064: add missing hwlock

Add missing hwlock for ipq8064 dtsi provided by qcom,sfpb-mutex.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[bjorn: Moved the node inside /soc]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707102040.1859-2-ansuelsmth@gmail.com

ARM: dts: qcom: ipq8064: add speedbin efuse nvmem node

Add speedbin efuse nvmem cell needed for the opp table for the CPU
freqs.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707010943.20857-10-ansuelsmth@gmail.com

ARM: dts: qcom: ipq8064: fix and add some missing gsbi node

Add some tag for gsbi to make them usable for ipq8064 SoC. Add missing
gsbi7 i2c node and gsbi1 node.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707010943.20857-8-ansuelsmth@gmail.com

ARM: dts: qcom: ipq8064: reduce pci IO size to 64K

The current value for pci IO is problematic for ath10k wifi card
commonly connected to ipq8064 SoC.
The current value is probably a typo and is actually uncommon to find
1MB IO space even on a x86 arch. Also with recent changes to the pci
driver, pci1 and pci2 now fails to function as any connected device
fails any reg read/write. Reduce this to 64K as it should be more than
enough and 3 * 64K of total IO space doesn't exceed the IO_SPACE_LIMIT
hardcoded for the ARM arch.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707010943.20857-7-ansuelsmth@gmail.com

ARM: dts: qcom: ipq8064: disable usb phy by default

Disable usb phy by default. When the usb phy were pushed, half of them
were flagged as disabled by mistake.
Correctly disable all usb phy and enable them only if a device actually
use them.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707010943.20857-6-ansuelsmth@gmail.com

ARM: dts: qcom: ipq8064: add missing snps,dwmac compatible for gmac

Add missing snps,dwmac compatible for gmac ipq8064 dtsi.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707010943.20857-5-ansuelsmth@gmail.com

ARM: dts: qcom: ipq8064: add specific dtsi with smb208 rpm regulators

Add specific ipq8064 dtsi with smb208 rpm regulators.

Qcom advise to use this configuration but it's not mandatory and OEM
can decide to implement their own regulators.
smb208 regulators are used to scale CPU voltage, L2 cache voltage and
Ubi32 cores.

There regulators are controlled by rpm and to correctly works gsbi4-i2c
require to be NEVER disabled or rpm will reject any regulator change
request.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707010943.20857-4-ansuelsmth@gmail.com

ARM: dts: qcom: ipq8064: add gsbi6 missing definition

Add gsbi6 missing definition for ipq8064.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707010943.20857-3-ansuelsmth@gmail.com

ARM: dts: qcom: ipq8064: add multiple missing pin definition

Add missing definition for mdio0 pins used for gpio-bitbang driver,i2c4
pins and rgmii2 pins for ipq8064.

Drop i2c4_pins node from ipq8064-ap148 dts as it's now moved to ipq8064
dtsi.

Drop mdio0_pins node from ipq8064-rb3011 dts as it's now moved to
ipq8064 dtsi.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707010943.20857-2-ansuelsmth@gmail.com

ARM: dts: qcom: msm8974-hammerhead: Add notification LED

Nexus 5 has a RGB LED connected to the TRILED and hence channels 7, 6 and
5 of the LPG. Add a node describing this.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220505164336.13210-1-luca@z3ntu.xyz

ARM: dts: qcom: msm8974-FP2: Add notification LED

FP2 has a RGB LED connected to the TRILED and hence channels 7, 6 and
5 of the LPG. Add a node describing this.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220505163029.6541-1-luca@z3ntu.xyz

ARM: dts: qcom: msm8974-sony: Enable LPG

Both Castor and Honami has RGB LEDs driven by the PM8941 LPG, define
these.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220713212309.130230-3-bjorn.andersson@linaro.org

ARM: dts: qcom: Add LPG node to pm8941

The PM8941 contains 8 LPG channels, as well as TRILED and LUT blocks.
Add a node for these.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220713212309.130230-2-bjorn.andersson@linaro.org

ARM: dts: qcom: sdx65: reorder USB interrupts

Three SoCs did not follow the interrupt order specified by the USB
controller binding.

While keeping the non-SuperSpeed interrupts together seems natural,
reorder the interrupts to match the binding.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bjorn: Split out from arm64 patch]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220715070248.19078-5-johan+linaro@kernel.org

arm64: dts: qcom: reorder USB interrupts

Three SoCs did not follow the interrupt order specified by the USB
controller binding.

While keeping the non-SuperSpeed interrupts together seems natural,
reorder the interrupts to match the binding.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bjorn: Omitted sdx65 part from this patch]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220715070248.19078-5-johan+linaro@kernel.org

arm64: dts: qcom: sc7280: reorder USB interrupts

Only one of the USB controllers supports SuperSpeed and have an SS PHY
wakeup interrupt.

Reorder the interrupts so that they match the updated binding which
specifically has the optional interrupt last.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220715070248.19078-4-johan+linaro@kernel.org

arm64: dts: qcom: sc8280xp: fix USB interrupts

The two single-port SC8280XP USB controllers do not have an hs_phy_irq
interrupt. Instead they have a pwr_event interrupt which is distinct
from the former and not yet supported by the driver.

Fix the USB node interrupt names so that they match the devicetree
binding.

Also fix the pwr_event interrupt of the second controller which should
be 811 as noticed by Andrew Halaney.

Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220715070248.19078-3-johan+linaro@kernel.org

arm64: dts: qcom: sc8280xp: fix USB clock order and naming

Fix the USB controller clock order and naming so that they match the
devicetree binding.

Note that the driver currently simply enables all clocks in the order
that they are specified in the devicetree. Reordering the clocks as per
the binding means that the only explicit ordering constraint found in
the vendor driver, that cfg_noc should be enabled before the core_clk,
is now honoured.

Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220715070248.19078-2-johan+linaro@kernel.org

Merge tag 'arm-soc/for-5.20/devicetree-arm64-part2' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.20, second part, please pull the following:

- Rafal adds basic support for the BCM4912-based router Asus GT-AX6000,
  he also has ARCH_BCM4908 select ARCH_BCMBCA such that in the next cycle
  we can remove ARCH_BCM4908 and continue to have make oldconfig work.
  Finally he spells out what BCA means to make it clearer

* tag 'arm-soc/for-5.20/devicetree-arm64-part2' of https://github.com/Broadcom/stblinux:
  arm64: bcmbca: Include full family name in Kconfig
  arm64: make ARCH_BCM4908 select ARCH_BCMBCA
  arm64: dts: Add base DTS file for bcmbca device Asus GT-AX6000

Link: https://lore.kernel.org/r/20220715221642.297536-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'arm-soc/for-5.20/devicetree-part2' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM SoCs Device Tree changes for
5.20, second part:

- Rafal defines the binding of BCM4912 based router Asus GT-AX6000

* tag 'arm-soc/for-5.20/devicetree-part2' of https://github.com/Broadcom/stblinux:
  dt-bindings: arm: Add Asus GT-AX6000 based on BCM4912

Link: https://lore.kernel.org/r/20220715221642.297536-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arm64: dts: qcom: sc8280xp: fix usb_1 ssphy irq

Fix the usb_1 SS PHY interrupt, which was mistakingly replaced with one
of the usb_2 PHY interrupts.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220715165344.28822-1-johan+linaro@kernel.org

arm64: dts: qcom: sc8280xp: Fix PMU interrupt

PPI interrupt should be 7 for the PMU.

Cc: Johan Hovold <johan+linaro@kernel.org>
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Reported-by: Steve Capper <Steve.Capper@arm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220713143429.22624-1-manivannan.sadhasivam@linaro.org

arm64: dts: qcom: sc8280xp: fix the smmu interrupt values

There has been wrong values introduced for context interrupt for
smu node apps_smmu. Fix those ones with due correction.

Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220711174133.28882-1-quic_ppareek@quicinc.com

arm64: dts: qcom: qcs404: Fix incorrect USB2 PHYs assignment

Currently the DT for QCS404 SoC has setup for 2 USB2 PHYs with one each
assigned to USB3 controller and USB2 controller. This assignment is
incorrect which only works by luck: as when each USB HCI comes up it
configures the *other* controllers PHY which is enough to make them
happy. If, for any reason, we were to disable one of the controllers then
both would stop working.

This was a difficult inconsistency to be caught which was found while
trying to enable USB support in u-boot. So with all the required drivers
ported to u-boot, I couldn't get the same USB storage device enumerated
in u-boot which was being enumerated fine by the kernel.

The root cause of the problem came out to be that I wasn't enabling USB2
PHY: "usb2_phy_prim" in u-boot. Then I realised that via simply disabling
the same USB2 PHY currently assigned to USB2 host controller in the
kernel disabled enumeration for USB3 host controller as well.

So fix this inconsistency by correctly assigning USB2 PHYs.

Fixes: 9375e7d719b3 ("arm64: dts: qcom: qcs404: Add USB devices and PHYs")
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220711083038.1518529-1-sumit.garg@linaro.org

arm64: dts: qcom: sc7280: drop unused clocks from eDP node

The eDP node includes two clocks which are used by the eDP PHY rather
than eDP controller itself. Drop these clocks to remove extra difference
between eDP and DP controllers.

Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220710084133.30976-7-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sc7280: drop address/size-cells from eDP node

Drop #address/#size-cells from eDP device node. For eDP the panels are
not described directly under the controller node. They are either
present under aux-bus child node, or they are declared separately (e.g.
in a /soc node).

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220710084133.30976-6-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sc7280: drop #clock-cells from displayport-controller

Drop #clock-cells from DP device node. It is a leftover from the times
before splitting the deviice into controller and PHY devices. Now the
clocks are provided by the PHY, while the controller doesn't provide any
clocks.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220710084133.30976-5-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sc7280: split register block for DP controller

Follow the schema for the DP controller and declare 5 register regions
instead of using a single region for all the registers. Note, this
extends the dts by adding p1 region to the DP node (to be used for DP
MST).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220710084133.30976-4-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sc7180: drop #clock-cells from displayport-controller

Drop #clock-cells from DP device node. It is a leftover from the times
before splitting the device into controller and PHY devices. Now the
clocks are provided by the PHY, while the controller doesn't provide any
clocks.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220710084133.30976-3-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sc7180: split register block for DP controller

Follow the schema for the DP controller and declare 5 register regions
instead of using a single region for all the registers. Note, this
extends the dts by adding p1 region to the DP node (to be used for DP
MST).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220710084133.30976-2-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sc7280: Move wcd specific pin conf to common file

Move wcd specific pin conf to common file to support various
herbronie variant boards and to avoid duplicate nodes in dts files.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1657197381-1271-1-git-send-email-quic_srivasam@quicinc.com

arm64: dts: qcom: msm8998: Make regulator voltages multiple of step-size

These voltages are not a multiple of the given step-size 8000 (with base
voltage 1664000) in pm8998_pldo, resulting in PLDO regulators l18 and
l22 failing to validate and in turn not probing the rpm-pm8998-regulator
driver:

    l18: unsupportable voltage constraints 2856000-2848000uV
    qcom_rpm_smd_regulator rpm-glink:rpm-requests:pm8998-regulators: l18: devm_regulator_register() failed, ret=-22

Round the voltages down for the sake of erring on the safe side, leaving
a comment in place to document this discrepancy wrt downstream sources.

Fixes: 390883af89d2 ("arm64: dts: qcom: msm8998: Introduce support for Sony Yoshino platform")
Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220507153627.1478268-1-marijn.suijten@somainline.org

arm64: dts: qcom: sm6350: Replace literal rpmhpd indices with constants

It seems the SM6350_CX definition was temporarily replaced with its
literal value 0 in 1797e1c9a95c ("arm64: dts: qcom: sm6350: Add SDHCI1/2
nodes") to prevent a dependency on the qcom-rpmpd.h header patch being
available prior to this DT patch being applied, similar to c23f1b77358c
("arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX").
However, unlike the revert of that in the sm6125 tree the next merge
window around in a90b8adfa2dd ("Revert "arm64: dts: qcom: sm6125: Avoid
using missing SM6125_VDDCX""), this has not yet happened for sm6350:
replace them back now that the definitions are definitely available.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220507224645.2238421-1-marijn.suijten@somainline.org

arm64: dts: qcom: ipq8074: add interrupt-parent to DTSI

Add interrupt-parent to the SoC DTSI to avoid duplicating it in each board
DTS file.

Remove interrupt-parent from existing board DTS files.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220708133846.599735-2-robimarko@gmail.com

arm64: dts: qcom: ipq8074: add #size/address-cells to DTSI

Add #size-cells and #address-cells to the SoC DTSI to avoid duplicating
the same properties in board DTS files.

Remove the mentioned properties from current board DTS files.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220708133846.599735-1-robimarko@gmail.com

arm64: dts: qcom: sm8250: rename DPU device node

Rename DPU device node to display-controller@ae01000 to follow the
DPU schema.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220708091656.2769390-3-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sc7180: rename DPU device node

Rename DPU device node to display-controller@ae01000 to follow the
DPU schema.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220708091656.2769390-2-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sdm845: rename DPU device node

Rename DPU device node to display-controller@ae01000 to follow the
DPU schema.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220708091656.2769390-1-dmitry.baryshkov@linaro.org

arm64: dts: qcom: ipq8074: add APCS node

APCS now has support for providing the APSS clocks as the child device
for IPQ8074.

So, add the required DT node for it as it will later be used as the CPU
clocksource.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[bjorn: Sorted node based on address]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707173733.404947-4-robimarko@gmail.com

dt-bindings: arm: Add Asus GT-AX6000 based on BCM4912

It's a home router, the first BCM4912 SoC based public device.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220713200351.28526-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

arm64: bcmbca: Include full family name in Kconfig

Spell out the BCA acronym to explain where these chips are coming from.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20220713145340.10599-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

arm64: make ARCH_BCM4908 select ARCH_BCMBCA

BCA is a big set / family of devices sharing multiple hardware blocks.
It covers BCM4908, BCM63xx, BCM68xx devices and more.

Most of drivers that depend on ARCH_BCM4908 should actually depend on
ARCH_BCMBCA. To make such transition easier, cleaner and breakage-free
add a proper "select".

Later on - if we decide to keep ARCH_BCM4908 - it may be moved under
ARCH_BCMBCA menu. Keeping it may be helpful for limited compiling of DTS
files and "default" Kconfig entires. Or we may just decide to drop it.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: William Zhang <william.zhang@broadcom.com>
Acked-by: Kursad Oney <kursad.oney@broadcom.com>
Link: https://lore.kernel.org/r/20220714045858.7786-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

arm64: dts: Add base DTS file for bcmbca device Asus GT-AX6000

It's a home router with 1 GiB of RAM, 6 Ethernet ports, 2 USB ports.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20220713200351.28526-2-zajec5@gmail.com
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Merge tag 'arm-soc/for-5.20/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM64-based SocS Device Tree
updates for 5.20, please pull the following:

- William adds the ARCH_BCMBCA Kconfig entry to follow the ARM 32-bit
  counter part and adds basic support for these DSL/PON SoCs: 63158,
  4912, 63146, 6856, 6813

- Anand adds basic support for the 6858 SoC

- Krzysztof fixes a missing space between a property name and its value
  in a number of DTS files

* tag 'arm-soc/for-5.20/devicetree-arm64' of https://github.com/Broadcom/stblinux:
  arm64: dts: Add DTS files for bcmbca SoC BCM6813
  arm64: dts: Add DTS files for bcmbca SoC BCM6856
  arm64: dts: Add DTS files for bcmbca SoC BCM63146
  arm64: dts: broadcom: adjust whitespace around '='
  ARM64: dts: Add DTS files for bcmbca SoC BCM6858
  arm64: dts: Add DTS files for bcmbca SoC BCM4912
  arm64: dts: Add DTS files for bcmbca SoC BCM63158
  arm64: bcmbca: add arch bcmbca machine entry

Link: https://lore.kernel.org/r/20220711164451.3542127-5-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'arm-soc/for-5.20/devicetree' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.20, please pull the following:

- Stefan drops the unnecessary "#address-cells" and "#size-cells"
  properties from the DPI node of BCM283x

- Anand documents and adds support for the 63178 and 6858 SoCs

- William migrates the 63138 platform over to ARCH_BCMBCA and ensures
  that it is documented within the BCMBCA Device Tree binding documents.
  He updates the 47622 DTS to remove unnecessary PSCI properties, fix
  the GIC nodes and some minor cosmetic changes. He finally adds support
  for the 63158, 4912, 6846, 6855, 6756, 63146, 6856, 63148, 6813, 6318
  SoCs.

- Peter, Nicolas and Stefan adds the necessary Device Tree nodes to the
  BCM2711 (Raspberry Pi 4) DTS to enable the use of the V3D GPU on these
  platforms.

- Christian adds support for the BCM53015 based Cisco Meraki MR26
  Wi-Fi access point.

- Krzysztof updates the Broadcom platforms DTS to add a missing
  whitespace between the property name and its value.

* tag 'arm-soc/for-5.20/devicetree' of https://github.com/Broadcom/stblinux: (35 commits)
  ARM: dts: Add BCM63138 generic board dts
  ARM: dts: update dts files for bcmbca SoC BCM63138
  ARM: dts: Move BCM963138DVT board dts to ARCH_BCMBCA
  dt-bindings: arm: add BCM63138 SoC
  ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node
  ARM: dts: bcm2835/bcm2711: Introduce reg-names in watchdog node
  dt-bindings: soc: bcm: bcm2835-pm: Add support for bcm2711
  dt-bindings: soc: bcm: bcm2835-pm: Introduce reg-names
  dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema
  ARM: dts: BCM5301X: Add DT for Meraki MR26
  dt-bindings: ARM: add bindings for the Meraki MR26
  dt-bindings: arm64: Add BCM6813 SoC
  ARM: dts: Add DTS files for bcmbca SoC BCM63148
  dt-bindings: arm: Add BCM63148 SoC
  dt-bindings: arm64: Add BCM6856 SoC
  dt-bindings: arm64: Add BCM63146 SoC
  ARM: dts: broadcom: correct gpio-keys properties
  ARM: dts: broadcom: align gpio-key node names with dtschema
  ARM: dts: Add DTS files for bcmbca SoC BCM6756
  dt-bindings: arm: Add BCM6756 SoC
  ...

Link: https://lore.kernel.org/r/20220711164451.3542127-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-for-5.20' of git://git./linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DTS updates for v5.20

This introduces initial support for Lenovo ThinkPad X13s, Qualcomm 8cx
Gen 3 Compute Reference Device, SA8295P Automotive Development Platform,
Xiaomi Mi 5s Plus, five new SC7180 Chrome OS boards, Inforce IFC6560, LG
G7 ThinQ and LG V35 ThinQ.

With IPQ8074 gaining GDSC support, this was expressed in the gcc node
and defined for the USB nodes. The SDHCI reset line was defined to get
the storage devices into a known state.

For MSM8996 interconnect providers, the second DSI interface, resets for
SDHCI are introduced. Support for the Xiaomi Mi 5s Plus is introduced
and the Dragonboard 820c gains definitions for its LEDs.

The MSM8998 platform changes consists of a various cleanup patches, the
FxTec Pro1 is split out from using the MTP dts and Sony Xperia devices
on the "Yoshino" platform gains ToF sensor.

On SC7180 five new Trogdor based boards are added and the description of
keyboard and detachables is improved.

On the SC7280-based Herobrine board DisplayPort is enabled, SPI flash
clock rate is changed, WiFi is enabled and the modem firmware path is
updated. The Villager boards gains touchscreen, and keyboard backlight.

This introduces initial support for the SC8280XP (aka 8cx Gen 3) and
related automotive platforms are introduced, with support for the
Qualcomm reference board, the Lenovo Thinkpad X13s and the SA8295P
Automotive Development Platform.

In addition to a wide range of smaller fixes on the SDM630 and SDM660
platforms, support for the secondary high speed USB controller is
introduced and the Sony Xperia "Nile" platform gains support for the RGB
status LED. Support for the Inforce IFC6560 board is introduced.

On SDM845 the bandwidth monitor for the CPU subsystem is introduced, to
scale LLCC clock rate based on profiling. CPU and cluster idle states
are switched to OSI hierarchical states. DB845c and SHIFT 6mq gains LED
support and new support for the LG G7 ThinQ and LG V35 ThinQ boards are
added.

DLL/DDR configuration for SDHCI nodes are defined for SM6125.

On SM8250 the GPU per-process page tables is enabled and for RB5 the
Light Pulse Generator-based LEDs are added.

The display clock controller is introduced for SM8350.

On SM8450 this introduces the camera clock controller and the UART
typically used for Bluetooth. The interconnect path for the crypto
engine is added to the SCM node, to ensure this is adequately clocked.

The assigned-clock-rate for the display processor is dropped from
several platforms, now that the driver derrives the min and max from the
clock.

In addition to this a wide range of fixes for stylistic issues and
issues discovered through Devicetree binding validation across many
platforms and boards are introduced.

* tag 'qcom-arm64-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (193 commits)
  arm64: dts: qcom: sc8280xp: fix DP PHY node unit addresses
  arm64: dts: qcom: sc8280xp: fix usb_0 HS PHY ref clock
  arm64: dts: qcom: sc7280: fix PCIe clock reference
  docs: arm: index.rst: add google/chromebook-boot-flow
  arm64: dts: qcom: msm8996: clean up PCIe PHY node
  arm64: dts: qcom: msm8996: use non-empty ranges for PCIe PHYs
  arm64: dts: qcom: sm8450: drop UFS PHY clock-cells
  arm64: dts: qcom: sm8250: drop UFS PHY clock-cells
  arm64: dts: qcom: sc8280xp: drop UFS PHY clock-cells
  arm64: dts: qcom: sm8450: drop USB PHY clock index
  arm64: dts: qcom: sm8350: drop USB PHY clock index
  arm64: dts: qcom: msm8998: drop USB PHY clock index
  arm64: dts: qcom: ipq8074: drop USB PHY clock index
  arm64: dts: qcom: ipq6018: drop USB PHY clock index
  arm64: dts: qcom: sm8250: add missing PCIe PHY clock-cells
  arm64: dts: qcom: sc7280: drop PCIe PHY clock index
  Revert "arm64: dts: qcom: Fix 'reg-names' for sdhci nodes"
  arm64: dts: qcom: sc7180-idp: add vdds supply to the DSI PHY
  arm64: dts: qcom: sc7280: use constants for gpucc clocks and power-domains
  arm64: dts: qcom: msm8996: add missing DSI clock assignments
  ...

Link: https://lore.kernel.org/r/20220713203939.1431054-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: dts: qcom: apq8064: create tsens device node

Create separate device node for thermal sensors on apq8064 platform.
Move related properties to the newly created device tree node.
This harmonizes apq8064 and ipq8064 device trees and allows gcc device
to be probed earlier by removing dependency on QFPROM nodes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521151437.1489111-5-dmitry.baryshkov@linaro.org

arm64: dts: qcom: sc8280xp: Add lost ranges for timer

The timer node needs ranges specified to map the 1-cell children to the
2-cell address range used in /soc. This addition never made it into the
patch that was posted and merged, so add it now.

Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220707160858.3178771-1-bjorn.andersson@linaro.org

Merge tag 'qcom-dts-for-5.20' of git://git./linux/kernel/git/qcom/linux into arm/dt

Qualcomm DTS updates for v5.20

This adds USB, NAND, QPIC BAM, CPUfreq, remoteprocs, SMEM, SCM,
watchdog, interconnect providers to the SDX65 5G modem platform and
enables relevant devices for the MTP.

The BAM DMUX interface used to exchange Ethernet/IP data with the modem
is described on the MSM8974 platform.

It fixes up the PXO supply clock to L2CC on IPQ6084, as the platform is
transitioned away from global clock lookup.

SDX55 has it's debug UART interrupt level corrected.

Lastly it contains a wide variety of fixes for DeviceTree validation
issues across most of the platforms.

* tag 'qcom-dts-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (48 commits)
  ARM: dts: qcom: msm8974: rename GPU's OPP table node
  ARM: dts: qcom: apq8064: disable DSI and DSI PHY by default
  ARM: dts: qcom: apq8064: rename DSI PHY iface clock
  ARM: dts: qcom: extend scm compatible to match dt-schema
  ARM: dts: qcom: Fix sdhci node names - use 'mmc@'
  ARM: dts: qcom: apq8064: drop phy-names from HDMI device node
  ARM: dts: qcom: apq8064-ifc6410: drop hdmi-mux-supply
  ARM: dts: qcom: pm8841: add required thermal-sensor-cells
  ARM: dts: qcom: msm8974: add required ranges to OCMEM
  ARM: dts: qcom: sdx55: add dedicated IMEM and syscon compatibles
  ARM: dts: qcom: msm8974: add dedicated IMEM compatible
  ARM: dts: qcom: apq8064-asus-nexus7: add dedicated IMEM compatible
  ARM: dts: qcom: use generic sram as name for imem and ocmem nodes
  ARM: dts: qcom: ipq8064: add function to LED nodes
  ARM: dts: qcom: ipq8064-rb3011: add color to LED node
  ARM: dts: qcom: ipq4018-ap120c-ac: add function and color to LED nodes
  ARM: dts: qcom: apq8060-ifc6410: add color to LED node
  ARM: dts: qcom: apq8060-dragonboard: add function and color to LED nodes
  ARM: dts: qcom: sdx55: Fix the IRQ trigger type for UART
  ARM: dts: qcom-msm8974: fix irq type on blsp2_uart1
  ...

Link: https://lore.kernel.org/r/20220713032024.1372427-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'at91-dt-5.20-2' of git://git./linux/kernel/git/at91/linux into arm/dt

AT91 DT for v5.20 #2

It contains only the enablement of USB device port.

* tag 'at91-dt-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: kswitch-d10: enable the USB device port

Link: https://lore.kernel.org/r/20220713070602.1652118-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ARM: dts: kswitch-d10: enable the USB device port

Now that there is driver support for the USB device, enable it.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220707132500.1708020-2-michael@walle.cc