Florian Westphal [Wed, 6 Jul 2022 14:50:04 +0000 (16:50 +0200)]
netfilter: conntrack: fix crash due to confirmed bit load reordering
Kajetan Puchalski reports crash on ARM, with backtrace of:
__nf_ct_delete_from_lists
nf_ct_delete
early_drop
__nf_conntrack_alloc
Unlike atomic_inc_not_zero, refcount_inc_not_zero is not a full barrier.
conntrack uses SLAB_TYPESAFE_BY_RCU, i.e. it is possible that a 'newly'
allocated object is still in use on another CPU:
CPU1 CPU2
encounter 'ct' during hlist walk
delete_from_lists
refcount drops to 0
kmem_cache_free(ct);
__nf_conntrack_alloc() // returns same object
refcount_inc_not_zero(ct); /* might fail */
/* If set, ct is public/in the hash table */
test_bit(IPS_CONFIRMED_BIT, &ct->status);
In case CPU1 already set refcount back to 1, refcount_inc_not_zero()
will succeed.
The expected possibilities for a CPU that obtained the object 'ct'
(but no reference so far) are:
1. refcount_inc_not_zero() fails. CPU2 ignores the object and moves to
the next entry in the list. This happens for objects that are about
to be free'd, that have been free'd, or that have been reallocated
by __nf_conntrack_alloc(), but where the refcount has not been
increased back to 1 yet.
2. refcount_inc_not_zero() succeeds. CPU2 checks the CONFIRMED bit
in ct->status. If set, the object is public/in the table.
If not, the object must be skipped; CPU2 calls nf_ct_put() to
un-do the refcount increment and moves to the next object.
Parallel deletion from the hlists is prevented by a
'test_and_set_bit(IPS_DYING_BIT, &ct->status);' check, i.e. only one
cpu will do the unlink, the other one will only drop its reference count.
Because refcount_inc_not_zero is not a full barrier, CPU2 may try to
delete an object that is not on any list:
1. refcount_inc_not_zero() successful (refcount inited to 1 on other CPU)
2. CONFIRMED test also successful (load was reordered or zeroing
of ct->status not yet visible)
3. delete_from_lists unlinks entry not on the hlist, because
IPS_DYING_BIT is 0 (already cleared).
2) is already wrong: CPU2 will handle a partially initited object
that is supposed to be private to CPU1.
Add needed barriers when refcount_inc_not_zero() is successful.
It also inserts a smp_wmb() before the refcount is set to 1 during
allocation.
Because other CPU might still see the object, refcount_set(1)
"resurrects" it, so we need to make sure that other CPUs will also observe
the right content. In particular, the CONFIRMED bit test must only pass
once the object is fully initialised and either in the hash or about to be
inserted (with locks held to delay possible unlink from early_drop or
gc worker).
I did not change flow_offload_alloc(), as far as I can see it should call
refcount_inc(), not refcount_inc_not_zero(): the ct object is attached to
the skb so its refcount should be >= 1 in all cases.
v2: prefer smp_acquire__after_ctrl_dep to smp_rmb (Will Deacon).
v3: keep smp_acquire__after_ctrl_dep close to refcount_inc_not_zero call
add comment in nf_conntrack_netlink, no control dependency there
due to locks.
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/all/Yr7WTfd6AVTQkLjI@e126311.manchester.arm.com/
Reported-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
Diagnosed-by: Will Deacon <will@kernel.org>
Fixes:
719774377622 ("netfilter: conntrack: convert to refcount_t api")
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Will Deacon <will@kernel.org>
David S. Miller [Sun, 3 Jul 2022 11:29:18 +0000 (12:29 +0100)]
Merge git://git./linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Insufficient validation of element datatype and length in
nft_setelem_parse_data(). At least commit
7d7402642eaf updates
maximum element data area up to 64 bytes when only 16 bytes
where supported at the time. Support for larger element size
came later in
fdb9c405e35b though. Picking this older commit
as Fixes: tag to be safe than sorry.
2) Memleak in pipapo destroy path, reproducible when transaction
in aborted. This is already triggering in the existing netfilter
test infrastructure since more recent new tests are covering this
path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Sat, 2 Jul 2022 02:16:31 +0000 (04:16 +0200)]
netfilter: nft_set_pipapo: release elements in clone from abort path
New elements that reside in the clone are not released in case that the
transaction is aborted.
[16302.231754] ------------[ cut here ]------------
[16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables]
[...]
[16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ #155
[...]
[16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables]
[16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05
[...]
[16302.231917] Call Trace:
[16302.231919] <TASK>
[16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables]
[16302.231934] nf_tables_abort+0x30/0x50 [nf_tables]
[16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink]
[16302.231952] ? __nla_validate_parse+0x48/0x190
[16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink]
[16302.231963] netlink_unicast+0x211/0x340
[16302.231969] netlink_sendmsg+0x21e/0x460
Add nft_set_pipapo_match_destroy() helper function to release the
elements in the lookup tables.
Stefano Brivio says: "We additionally look for elements pointers in the
cloned matching data if priv->dirty is set, because that means that
cloned data might point to additional elements we did not commit to the
working copy yet (such as the abort path case, but perhaps not limited
to it)."
Fixes:
3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Sat, 2 Jul 2022 02:16:30 +0000 (04:16 +0200)]
netfilter: nf_tables: stricter validation of element data
Make sure element data type and length do not mismatch the one specified
by the set declaration.
Fixes:
7d7402642eaf ("netfilter: nf_tables: variable sized set element keys / data")
Reported-by: Hugues ANGUELKOV <hanguelkov@randorisec.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Karsten Graul [Fri, 1 Jul 2022 18:41:43 +0000 (20:41 +0200)]
MAINTAINERS: add Wenjia as SMC maintainer
Add Wenjia as maintainer for Shared Memory Communications (SMC)
Sockets.
Acked-by: Wenjia Zhang <wenjia@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Thu, 30 Jun 2022 06:22:28 +0000 (14:22 +0800)]
selftests/net: fix section name when using xdp_dummy.o
Since commit
8fffa0e3451a ("selftests/bpf: Normalize XDP section names in
selftests") the xdp_dummy.o's section name has changed to xdp. But some
tests are still using "section xdp_dummy", which make the tests failed.
Fix them by updating to the new section name.
Fixes:
8fffa0e3451a ("selftests/bpf: Normalize XDP section names in selftests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220630062228.3453016-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 2 Jul 2022 02:56:28 +0000 (19:56 -0700)]
Merge https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2022-07-02
We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 6 files changed, 193 insertions(+), 86 deletions(-).
The main changes are:
1) Fix clearing of page contiguity when unmapping XSK pool, from Ivan Malov.
2) Two verifier fixes around bounds data propagation, from Daniel Borkmann.
3) Fix fprobe sample module's parameter descriptions, from Masami Hiramatsu.
4) General BPF maintainer entry revamp to better scale patch reviews.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Add verifier test case for jmp32's jeq/jne
bpf, selftests: Add verifier test case for imm=0,umin=0,umax=1 scalar
bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals
bpf: Fix incorrect verifier simulation around jmp32's jeq/jne
xsk: Clear page contiguity bit when unmapping pool
bpf, docs: Better scale maintenance of BPF subsystem
fprobe, samples: Add module parameter descriptions
====================
Link: https://lore.kernel.org/r/20220701230121.10354-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann [Fri, 1 Jul 2022 12:47:27 +0000 (14:47 +0200)]
bpf, selftests: Add verifier test case for jmp32's jeq/jne
Add a test case to trigger the verifier's incorrect conclusion in the
case of jmp32's jeq/jne. Also here, make use of dead code elimination,
so that we can see the verifier bailing out on unfixed kernels.
Before:
# ./test_verifier 724
#724/p jeq32/jne32: bounds checking FAIL
Failed to load prog 'Permission denied'!
R4 !read_ok
verification time 8 usec
stack depth 0
processed 8 insns (limit
1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 0
Summary: 0 PASSED, 0 SKIPPED, 1 FAILED
After:
# ./test_verifier 724
#724/p jeq32/jne32: bounds checking OK
Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220701124727.11153-4-daniel@iogearbox.net
Daniel Borkmann [Fri, 1 Jul 2022 12:47:26 +0000 (14:47 +0200)]
bpf, selftests: Add verifier test case for imm=0,umin=0,umax=1 scalar
Add a test case to trigger the constant scalar issue which leaves the
register in scalar(imm=0,umin=0,umax=1,var_off=(0x0; 0x0)) state. Make
use of dead code elimination, so that we can see the verifier bailing
out on unfixed kernels. For the condition, we use jle given it checks
on umax bound.
Before:
# ./test_verifier 743
#743/p jump & dead code elimination FAIL
Failed to load prog 'Permission denied'!
R4 !read_ok
verification time 11 usec
stack depth 0
processed 13 insns (limit
1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1
Summary: 0 PASSED, 0 SKIPPED, 1 FAILED
After:
# ./test_verifier 743
#743/p jump & dead code elimination OK
Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220701124727.11153-3-daniel@iogearbox.net
Daniel Borkmann [Fri, 1 Jul 2022 12:47:25 +0000 (14:47 +0200)]
bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals
Kuee reported a corner case where the tnum becomes constant after the call
to __reg_bound_offset(), but the register's bounds are not, that is, its
min bounds are still not equal to the register's max bounds.
This in turn allows to leak pointers through turning a pointer register as
is into an unknown scalar via adjust_ptr_min_max_vals().
Before:
func#0 @0
0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0))
1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0))
2: (87) r3 = -r3 ; R3_w=scalar()
3: (87) r3 = -r3 ; R3_w=scalar()
4: (47) r3 |= 32767 ; R3_w=scalar(smin=-
9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-
2147450881)
5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=
9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-
2147450881,u32_min=32767)
6: (95) exit
from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=
9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-
2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=
9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-
2147450881,u32_min=32767)
8: (95) exit
from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
9: (07) r3 += -32767 ; R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)) <--- [*]
10: (95) exit
What can be seen here is that R3=scalar(umin=32767,umax=32768,var_off=(0x7fff;
0x8000)) after the operation R3 += -32767 results in a 'malformed' constant, that
is, R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)). Intersecting with var_off has
not been done at that point via __update_reg_bounds(), which would have improved
the umax to be equal to umin.
Refactor the tnum <> min/max bounds information flow into a reg_bounds_sync()
helper and use it consistently everywhere. After the fix, bounds have been
corrected to R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) and thus the register
is regarded as a 'proper' constant scalar of 0.
After:
func#0 @0
0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0))
1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0))
2: (87) r3 = -r3 ; R3_w=scalar()
3: (87) r3 = -r3 ; R3_w=scalar()
4: (47) r3 |= 32767 ; R3_w=scalar(smin=-
9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-
2147450881)
5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=
9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-
2147450881,u32_min=32767)
6: (95) exit
from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=
9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-
2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=
9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-
2147450881,u32_min=32767)
8: (95) exit
from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
9: (07) r3 += -32767 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) <--- [*]
10: (95) exit
Fixes:
b03c9f9fdc37 ("bpf/verifier: track signed and unsigned min/max values")
Reported-by: Kuee K1r0a <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220701124727.11153-2-daniel@iogearbox.net
Daniel Borkmann [Fri, 1 Jul 2022 12:47:24 +0000 (14:47 +0200)]
bpf: Fix incorrect verifier simulation around jmp32's jeq/jne
Kuee reported a quirk in the jmp32's jeq/jne simulation, namely that the
register value does not match expectations for the fall-through path. For
example:
Before fix:
0: R1=ctx(off=0,imm=0) R10=fp0
0: (b7) r2 = 0 ; R2_w=P0
1: (b7) r6 = 563 ; R6_w=P563
2: (87) r2 = -r2 ; R2_w=Pscalar()
3: (87) r2 = -r2 ; R2_w=Pscalar()
4: (4c) w2 |= w6 ; R2_w=Pscalar(umin=563,umax=
4294967295,var_off=(0x233; 0xfffffdcc),s32_min=-
2147483085) R6_w=P563
5: (56) if w2 != 0x8 goto pc+1 ; R2_w=P571 <--- [*]
6: (95) exit
R0 !read_ok
After fix:
0: R1=ctx(off=0,imm=0) R10=fp0
0: (b7) r2 = 0 ; R2_w=P0
1: (b7) r6 = 563 ; R6_w=P563
2: (87) r2 = -r2 ; R2_w=Pscalar()
3: (87) r2 = -r2 ; R2_w=Pscalar()
4: (4c) w2 |= w6 ; R2_w=Pscalar(umin=563,umax=
4294967295,var_off=(0x233; 0xfffffdcc),s32_min=-
2147483085) R6_w=P563
5: (56) if w2 != 0x8 goto pc+1 ; R2_w=P8 <--- [*]
6: (95) exit
R0 !read_ok
As can be seen on line 5 for the branch fall-through path in R2 [*] is that
given condition w2 != 0x8 is false, verifier should conclude that r2 = 8 as
upper 32 bit are known to be zero. However, verifier incorrectly concludes
that r2 = 571 which is far off.
The problem is it only marks false{true}_reg as known in the switch for JE/NE
case, but at the end of the function, it uses {false,true}_{64,32}off to
update {false,true}_reg->var_off and they still hold the prior value of
{false,true}_reg->var_off before it got marked as known. The subsequent
__reg_combine_32_into_64() then propagates this old var_off and derives new
bounds. The information between min/max bounds on {false,true}_reg from
setting the register to known const combined with the {false,true}_reg->var_off
based on the old information then derives wrong register data.
Fix it by detangling the BPF_JEQ/BPF_JNE cases and updating relevant
{false,true}_{64,32}off tnums along with the register marking to known
constant.
Fixes:
3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Kuee K1r0a <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220701124727.11153-1-daniel@iogearbox.net
Li kunyu [Fri, 1 Jul 2022 06:47:23 +0000 (14:47 +0800)]
net: usb: Fix typo in code
Remove the repeated ';' from code.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 1 Jul 2022 10:25:20 +0000 (11:25 +0100)]
Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-06-30
This series contains updates to i40e driver only.
Lukasz adds reporting of packets dropped for being too large into the Rx
dropped statistics.
Norbert clears VF filter and MAC address to resolve issue with older VFs
being unable to change their MAC address.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 30 Jun 2022 22:26:55 +0000 (15:26 -0700)]
Merge tag 'net-5.19-rc5' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - new code bugs:
- clear msg_get_inq in __sys_recvfrom() and __copy_msghdr_from_user()
- mptcp:
- invoke MP_FAIL response only when needed
- fix shutdown vs fallback race
- consistent map handling on failure
- octeon_ep: use bitwise AND
Previous releases - regressions:
- tipc: move bc link creation back to tipc_node_create, fix NPD
Previous releases - always broken:
- tcp: add a missing nf_reset_ct() in 3WHS handling to prevent socket
buffered skbs from keeping refcount on the conntrack module
- ipv6: take care of disable_policy when restoring routes
- tun: make sure to always disable and unlink NAPI instances
- phy: don't trigger state machine while in suspend
- netfilter: nf_tables: avoid skb access on nf_stolen
- asix: fix "can't send until first packet is send" issue
- usb: asix: do not force pause frames support
- nxp-nci: don't issue a zero length i2c_master_read()
Misc:
- ncsi: allow use of proper "mellanox" DT vendor prefix
- act_api: add a message for user space if any actions were already
flushed before the error was hit"
* tag 'net-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
net: dsa: felix: fix race between reading PSFP stats and port stats
selftest: tun: add test for NAPI dismantle
net: tun: avoid disabling NAPI twice
net: sparx5: mdb add/del handle non-sparx5 devices
net: sfp: fix memory leak in sfp_probe()
mlxsw: spectrum_router: Fix rollback in tunnel next hop init
net: rose: fix UAF bugs caused by timer handler
net: usb: ax88179_178a: Fix packet receiving
net: bonding: fix use-after-free after 802.3ad slave unbind
ipv6: fix lockdep splat in in6_dump_addrs()
net: phy: ax88772a: fix lost pause advertisement configuration
net: phy: Don't trigger state machine while in suspend
usbnet: fix memory allocation in helpers
selftests net: fix kselftest net fatal error
NFC: nxp-nci: don't print header length mismatch on i2c error
NFC: nxp-nci: Don't issue a zero length i2c_master_read()
net: tipc: fix possible refcount leak in tipc_sk_create()
nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
net: ipv6: unexport __init-annotated seg6_hmac_net_init()
ipv6/sit: fix ipip6_tunnel_get_prl return value
...
Amir Goldstein [Thu, 30 Jun 2022 19:58:49 +0000 (22:58 +0300)]
vfs: fix copy_file_range() regression in cross-fs copies
A regression has been reported by Nicolas Boichat, found while using the
copy_file_range syscall to copy a tracefs file.
Before commit
5dae222a5ff0 ("vfs: allow copy_file_range to copy across
devices") the kernel would return -EXDEV to userspace when trying to
copy a file across different filesystems. After this commit, the
syscall doesn't fail anymore and instead returns zero (zero bytes
copied), as this file's content is generated on-the-fly and thus reports
a size of zero.
Another regression has been reported by He Zhe - the assertion of
WARN_ON_ONCE(ret == -EOPNOTSUPP) can be triggered from userspace when
copying from a sysfs file whose read operation may return -EOPNOTSUPP.
Since we do not have test coverage for copy_file_range() between any two
types of filesystems, the best way to avoid these sort of issues in the
future is for the kernel to be more picky about filesystems that are
allowed to do copy_file_range().
This patch restores some cross-filesystem copy restrictions that existed
prior to commit
5dae222a5ff0 ("vfs: allow copy_file_range to copy across
devices"), namely, cross-sb copy is not allowed for filesystems that do
not implement ->copy_file_range().
Filesystems that do implement ->copy_file_range() have full control of
the result - if this method returns an error, the error is returned to
the user. Before this change this was only true for fs that did not
implement the ->remap_file_range() operation (i.e. nfsv3).
Filesystems that do not implement ->copy_file_range() still fall-back to
the generic_copy_file_range() implementation when the copy is within the
same sb. This helps the kernel can maintain a more consistent story
about which filesystems support copy_file_range().
nfsd and ksmbd servers are modified to fall-back to the
generic_copy_file_range() implementation in case vfs_copy_file_range()
fails with -EOPNOTSUPP or -EXDEV, which preserves behavior of
server-side-copy.
fall-back to generic_copy_file_range() is not implemented for the smb
operation FSCTL_DUPLICATE_EXTENTS_TO_FILE, which is arguably a correct
change of behavior.
Fixes:
5dae222a5ff0 ("vfs: allow copy_file_range to copy across devices")
Link: https://lore.kernel.org/linux-fsdevel/20210212044405.4120619-1-drinkcat@chromium.org/
Link: https://lore.kernel.org/linux-fsdevel/CANMq1KDZuxir2LM5jOTm0xx+BnvW=ZmpsG47CyHFJwnw7zSX6Q@mail.gmail.com/
Link: https://lore.kernel.org/linux-fsdevel/20210126135012.1.If45b7cdc3ff707bc1efa17f5366057d60603c45f@changeid/
Link: https://lore.kernel.org/linux-fsdevel/20210630161320.29006-1-lhenriques@suse.de/
Reported-by: Nicolas Boichat <drinkcat@chromium.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Luis Henriques <lhenriques@suse.de>
Fixes:
64bf5ff58dff ("vfs: no fallback for ->copy_file_range")
Link: https://lore.kernel.org/linux-fsdevel/20f17f64-88cb-4e80-07c1-85cb96c83619@windriver.com/
Reported-by: He Zhe <zhe.he@windriver.com>
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Norbert Zulinski [Wed, 8 Jun 2022 09:10:56 +0000 (11:10 +0200)]
i40e: Fix VF's MAC Address change on VM
Clear VF MAC from parent PF and remove VF filter from VSI when both
conditions are true:
-VIRTCHNL_VF_OFFLOAD_USO is not used
-VM MAC was not set from PF level
It affects older version of IAVF and it allow them to change MAC
Address on VM, newer IAVF won't change their behaviour.
Previously it wasn't possible to change VF's MAC Address on VM
because there is flag on IAVF driver that won't allow to
change MAC Address if this address is given from PF driver.
Fixes:
155f0ac2c96b ("iavf: allow permanent MAC address to change")
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Lukasz Cieplicki [Tue, 31 May 2022 10:54:20 +0000 (12:54 +0200)]
i40e: Fix dropped jumbo frames statistics
Dropped packets caused by too large frames were not included in
dropped RX packets statistics.
Issue was caused by not reading the GL_RXERR1 register. That register
stores count of packet which was have been dropped due to too large
size.
Fix it by reading GL_RXERR1 register for each interface.
Repro steps:
Send a packet larger than the set MTU to SUT
Observe rx statists: ethtool -S <interface> | grep rx | grep -v ": 0"
Fixes:
41a9e55c89be ("i40e: add missing VSI statistics")
Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Vladimir Oltean [Wed, 29 Jun 2022 18:30:07 +0000 (21:30 +0300)]
net: dsa: felix: fix race between reading PSFP stats and port stats
Both PSFP stats and the port stats read by ocelot_check_stats_work() are
indirectly read through the same mechanism - write to STAT_CFG:STAT_VIEW,
read from SYS:STAT:CNT[n].
It's just that for port stats, we write STAT_VIEW with the index of the
port, and for PSFP stats, we write STAT_VIEW with the filter index.
So if we allow them to run concurrently, ocelot_check_stats_work() may
change the view from vsc9959_psfp_counters_get(), and vice versa.
Fixes:
7d4b564d6add ("net: dsa: felix: support psfp filter on vsc9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220629183007.3808130-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 29 Jun 2022 18:19:11 +0000 (11:19 -0700)]
selftest: tun: add test for NAPI dismantle
Being lazy does not pay, add the test for various
ordering of tun queue close / detach / destroy.
Link: https://lore.kernel.org/r/20220629181911.372047-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 29 Jun 2022 18:19:10 +0000 (11:19 -0700)]
net: tun: avoid disabling NAPI twice
Eric reports that syzbot made short work out of my speculative
fix. Indeed when queue gets detached its tfile->tun remains,
so we would try to stop NAPI twice with a detach(), close()
sequence.
Alternative fix would be to move tun_napi_disable() to
tun_detach_all() and let the NAPI run after the queue
has been detached.
Fixes:
a8fc8cb5692a ("net: tun: stop NAPI when detaching queues")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220629181911.372047-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Casper Andersson [Thu, 30 Jun 2022 12:22:26 +0000 (14:22 +0200)]
net: sparx5: mdb add/del handle non-sparx5 devices
When adding/deleting mdb entries on other net_devices, eg., tap
interfaces, it should not crash.
Fixes:
3bacfccdcb2d ("net: sparx5: Add mdb handlers")
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220630122226.316812-1-casper.casan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 30 Jun 2022 17:03:22 +0000 (10:03 -0700)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Three minor bug fixes:
- qedr not setting the QP timeout properly toward userspace
- Memory leak on error path in ib_cm
- Divide by 0 in RDMA interrupt moderation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
linux/dim: Fix divide by 0 in RDMA DIM
RDMA/cm: Fix memory leak in ib_cm_insert_listen
RDMA/qedr: Fix reporting QP timeout attribute
Linus Torvalds [Thu, 30 Jun 2022 16:57:18 +0000 (09:57 -0700)]
Merge tag 'fsnotify_for_v5.19-rc5' of git://git./linux/kernel/git/jack/linux-fs
Pull fanotify fix from Jan Kara:
"A fix for recently added fanotify API to have stricter checks and
refuse some invalid flag combinations to make our life easier in the
future"
* tag 'fsnotify_for_v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: refine the validation checks on non-dir inode mask
Linus Torvalds [Thu, 30 Jun 2022 16:45:42 +0000 (09:45 -0700)]
Merge tag 'v5.19-p3' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a regression that breaks the ccp driver"
* tag 'v5.19-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Fix device IRQ counting by using platform_irq_count()
Jianglei Nie [Wed, 29 Jun 2022 07:55:50 +0000 (15:55 +0800)]
net: sfp: fix memory leak in sfp_probe()
sfp_probe() allocates a memory chunk from sfp with sfp_alloc(). When
devm_add_action() fails, sfp is not freed, which leads to a memory leak.
We should use devm_add_action_or_reset() instead of devm_add_action().
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220629075550.2152003-1-niejianglei2021@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Petr Machata [Wed, 29 Jun 2022 07:02:05 +0000 (10:02 +0300)]
mlxsw: spectrum_router: Fix rollback in tunnel next hop init
In mlxsw_sp_nexthop6_init(), a next hop is always added to the router
linked list, and mlxsw_sp_nexthop_type_init() is invoked afterwards. When
that function results in an error, the next hop will not have been removed
from the linked list. As the error is propagated upwards and the caller
frees the next hop object, the linked list ends up holding an invalid
object.
A similar issue comes up with mlxsw_sp_nexthop4_init(), where rollback
block does exist, however does not include the linked list removal.
Both IPv6 and IPv4 next hops have a similar issue with next-hop counter
rollbacks. As these were introduced in the same patchset as the next hop
linked list, include the cleanup in this patch.
Fixes:
dbe4598c1e92 ("mlxsw: spectrum_router: Keep nexthops in a linked list")
Fixes:
a5390278a5eb ("mlxsw: spectrum: Add support for setting counters on nexthops")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220629070205.803952-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Duoming Zhou [Wed, 29 Jun 2022 00:26:40 +0000 (08:26 +0800)]
net: rose: fix UAF bugs caused by timer handler
There are UAF bugs in rose_heartbeat_expiry(), rose_timer_expiry()
and rose_idletimer_expiry(). The root cause is that del_timer()
could not stop the timer handler that is running and the refcount
of sock is not managed properly.
One of the UAF bugs is shown below:
(thread 1) | (thread 2)
| rose_bind
| rose_connect
| rose_start_heartbeat
rose_release | (wait a time)
case ROSE_STATE_0 |
rose_destroy_socket | rose_heartbeat_expiry
rose_stop_heartbeat |
sock_put(sk) | ...
sock_put(sk) // FREE |
| bh_lock_sock(sk) // USE
The sock is deallocated by sock_put() in rose_release() and
then used by bh_lock_sock() in rose_heartbeat_expiry().
Although rose_destroy_socket() calls rose_stop_heartbeat(),
it could not stop the timer that is running.
The KASAN report triggered by POC is shown below:
BUG: KASAN: use-after-free in _raw_spin_lock+0x5a/0x110
Write of size 4 at addr
ffff88800ae59098 by task swapper/3/0
...
Call Trace:
<IRQ>
dump_stack_lvl+0xbf/0xee
print_address_description+0x7b/0x440
print_report+0x101/0x230
? irq_work_single+0xbb/0x140
? _raw_spin_lock+0x5a/0x110
kasan_report+0xed/0x120
? _raw_spin_lock+0x5a/0x110
kasan_check_range+0x2bd/0x2e0
_raw_spin_lock+0x5a/0x110
rose_heartbeat_expiry+0x39/0x370
? rose_start_heartbeat+0xb0/0xb0
call_timer_fn+0x2d/0x1c0
? rose_start_heartbeat+0xb0/0xb0
expire_timers+0x1f3/0x320
__run_timers+0x3ff/0x4d0
run_timer_softirq+0x41/0x80
__do_softirq+0x233/0x544
irq_exit_rcu+0x41/0xa0
sysvec_apic_timer_interrupt+0x8c/0xb0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1b/0x20
RIP: 0010:default_idle+0xb/0x10
RSP: 0018:
ffffc9000012fea0 EFLAGS:
00000202
RAX:
000000000000bcae RBX:
ffff888006660f00 RCX:
000000000000bcae
RDX:
0000000000000001 RSI:
ffffffff843a11c0 RDI:
ffffffff843a1180
RBP:
dffffc0000000000 R08:
dffffc0000000000 R09:
ffffed100da36d46
R10:
dfffe9100da36d47 R11:
ffffffff83cf0950 R12:
0000000000000000
R13:
1ffff11000ccc1e0 R14:
ffffffff8542af28 R15:
dffffc0000000000
...
Allocated by task 146:
__kasan_kmalloc+0xc4/0xf0
sk_prot_alloc+0xdd/0x1a0
sk_alloc+0x2d/0x4e0
rose_create+0x7b/0x330
__sock_create+0x2dd/0x640
__sys_socket+0xc7/0x270
__x64_sys_socket+0x71/0x80
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 152:
kasan_set_track+0x4c/0x70
kasan_set_free_info+0x1f/0x40
____kasan_slab_free+0x124/0x190
kfree+0xd3/0x270
__sk_destruct+0x314/0x460
rose_release+0x2fa/0x3b0
sock_close+0xcb/0x230
__fput+0x2d9/0x650
task_work_run+0xd6/0x160
exit_to_user_mode_loop+0xc7/0xd0
exit_to_user_mode_prepare+0x4e/0x80
syscall_exit_to_user_mode+0x20/0x40
do_syscall_64+0x4f/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
This patch adds refcount of sock when we use functions
such as rose_start_heartbeat() and so on to start timer,
and decreases the refcount of sock when timer is finished
or deleted by functions such as rose_stop_heartbeat()
and so on. As a result, the UAF bugs could be mitigated.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Tested-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220629002640.5693-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jose Alonso [Tue, 28 Jun 2022 15:13:02 +0000 (12:13 -0300)]
net: usb: ax88179_178a: Fix packet receiving
This patch corrects packet receiving in ax88179_rx_fixup.
- problem observed:
ifconfig shows allways a lot of 'RX Errors' while packets
are received normally.
This occurs because ax88179_rx_fixup does not recognise properly
the usb urb received.
The packets are normally processed and at the end, the code exits
with 'return 0', generating RX Errors.
(pkt_cnt==-2 and ptk_hdr over field rx_hdr trying to identify
another packet there)
This is a usb urb received by "tcpdump -i usbmon2 -X" on a
little-endian CPU:
0x0000: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
^ packet 1 start (pkt_len = 0x05ec)
^^^^ IP alignment pseudo header
^ ethernet packet start
last byte ethernet packet v
padding (8-bytes aligned) vvvv vvvv
0x05e0: c92d d444 1420 8a69 83dd 272f e82b 9811
0x05f0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
... ^ packet 2
0x0be0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
...
0x1130: 9d41 9171 8a38 0ec5 eeee f8e3 3b19 87a0
...
0x1720: 8cfc 15ff 5e4c e85c eeee f8e3 3b19 87a0
...
0x1d10: ecfa 2a3a 19ab c78c eeee f8e3 3b19 87a0
...
0x2070: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
... ^ packet 7
0x2120: 7c88 4ca5 5c57 7dcc 0d34 7577 f778 7e0a
0x2130: f032 e093 7489 0740 3008 ec05 0000 0080
====1==== ====2====
hdr_off ^
pkt_len = 0x05ec ^^^^
AX_RXHDR_*=0x00830 ^^^^ ^
pkt_len = 0 ^^^^
AX_RXHDR_DROP_ERR=0x80000000 ^^^^ ^
0x2140: 3008 ec05 0000 0080 3008 5805 0000 0080
0x2150: 3008 ec05 0000 0080 3008 ec05 0000 0080
0x2160: 3008 5803 0000 0080 3008 c800 0000 0080
===11==== ===12==== ===13==== ===14====
0x2170: 0000 0000 0e00 3821
^^^^ ^^^^ rx_hdr
^^^^ pkt_cnt=14
^^^^ hdr_off=0x2138
^^^^ ^^^^ padding
The dump shows that pkt_cnt is the number of entrys in the
per-packet metadata. It is "2 * packet count".
Each packet have two entrys. The first have a valid
value (pkt_len and AX_RXHDR_*) and the second have a
dummy-header 0x80000000 (pkt_len=0 with AX_RXHDR_DROP_ERR).
Why exists dummy-header for each packet?!?
My guess is that this was done probably to align the
entry for each packet to 64-bits and maintain compatibility
with old firmware.
There is also a padding (0x00000000) before the rx_hdr to
align the end of rx_hdr to 64-bit.
Note that packets have a alignment of 64-bits (8-bytes).
This patch assumes that the dummy-header and the last
padding are optional. So it preserves semantics and
recognises the same valid packets as the current code.
This patch was made using only the dumpfile information and
tested with only one device:
0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet
Fixes:
57bc3d3ae8c1 ("net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup")
Fixes:
e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Alonso <joalonsof@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/d6970bb04bf67598af4d316eaeb1792040b18cfd.camel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Yevhen Orlov [Wed, 29 Jun 2022 01:29:14 +0000 (04:29 +0300)]
net: bonding: fix use-after-free after 802.3ad slave unbind
commit
0622cab0341c ("bonding: fix 802.3ad aggregator reselection"),
resolve case, when there is several aggregation groups in the same bond.
bond_3ad_unbind_slave will invalidate (clear) aggregator when
__agg_active_ports return zero. So, ad_clear_agg can be executed even, when
num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for,
previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave
will not update slave ports list, because lag_ports==NULL. So, here we
got slave ports, pointing to freed aggregator memory.
Fix with checking actual number of ports in group (as was before
commit
0622cab0341c ("bonding: fix 802.3ad aggregator reselection") ),
before ad_clear_agg().
The KASAN logs are as follows:
[ 767.617392] ==================================================================
[ 767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470
[ 767.638764] Read of size 2 at addr
ffff00011ba9d430 by task kworker/u8:7/767
[ 767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G O 5.15.11 #15
[ 767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT)
[ 767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler
[ 767.666468] Call trace:
[ 767.668930] dump_backtrace+0x0/0x2d0
[ 767.672625] show_stack+0x24/0x30
[ 767.675965] dump_stack_lvl+0x68/0x84
[ 767.679659] print_address_description.constprop.0+0x74/0x2b8
[ 767.685451] kasan_report+0x1f0/0x260
[ 767.689148] __asan_load2+0x94/0xd0
[ 767.692667] bond_3ad_state_machine_handler+0x13dc/0x1470
Fixes:
0622cab0341c ("bonding: fix 802.3ad aggregator reselection")
Co-developed-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20220629012914.361-1-yevhen.orlov@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Tue, 28 Jun 2022 12:12:48 +0000 (12:12 +0000)]
ipv6: fix lockdep splat in in6_dump_addrs()
As reported by syzbot, we should not use rcu_dereference()
when rcu_read_lock() is not held.
WARNING: suspicious RCU usage
5.19.0-rc2-syzkaller #0 Not tainted
net/ipv6/addrconf.c:5175 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz-executor326/3617:
#0:
ffffffff8d5848e8 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xae/0xc20 net/netlink/af_netlink.c:2223
stack backtrace:
CPU: 0 PID: 3617 Comm: syz-executor326 Not tainted 5.19.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
in6_dump_addrs+0x12d1/0x1790 net/ipv6/addrconf.c:5175
inet6_dump_addr+0x9c1/0xb50 net/ipv6/addrconf.c:5300
netlink_dump+0x541/0xc20 net/netlink/af_netlink.c:2275
__netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2380
netlink_dump_start include/linux/netlink.h:245 [inline]
rtnetlink_rcv_msg+0x73e/0xc90 net/core/rtnetlink.c:6046
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2492
___sys_sendmsg+0xf3/0x170 net/socket.c:2546
__sys_sendmsg net/socket.c:2575 [inline]
__do_sys_sendmsg net/socket.c:2584 [inline]
__se_sys_sendmsg net/socket.c:2582 [inline]
__x64_sys_sendmsg+0x132/0x220 net/socket.c:2582
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fixes:
88e2ca308094 ("mld: convert ifmcaddr6 to RCU")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20220628121248.858695-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel [Tue, 28 Jun 2022 11:43:49 +0000 (13:43 +0200)]
net: phy: ax88772a: fix lost pause advertisement configuration
In case of asix_ax88772a_link_change_notify() workaround, we run soft
reset which will automatically clear MII_ADVERTISE configuration. The
PHYlib framework do not know about changed configuration state of the
PHY, so we need use phy_init_hw() to reinit PHY configuration.
Fixes:
dde258469257 ("net: usb/phy: asix: add support for ax88772A/C PHYs")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220628114349.3929928-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lukas Wunner [Tue, 28 Jun 2022 10:15:08 +0000 (12:15 +0200)]
net: phy: Don't trigger state machine while in suspend
Upon system sleep, mdio_bus_phy_suspend() stops the phy_state_machine(),
but subsequent interrupts may retrigger it:
They may have been left enabled to facilitate wakeup and are not
quiesced until the ->suspend_noirq() phase. Unwanted interrupts may
hence occur between mdio_bus_phy_suspend() and dpm_suspend_noirq(),
as well as between dpm_resume_noirq() and mdio_bus_phy_resume().
Retriggering the phy_state_machine() through an interrupt is not only
undesirable for the reason given in mdio_bus_phy_suspend() (freezing it
midway with phydev->lock held), but also because the PHY may be
inaccessible after it's suspended: Accesses to USB-attached PHYs are
blocked once usb_suspend_both() clears the can_submit flag and PHYs on
PCI network cards may become inaccessible upon suspend as well.
Amend phy_interrupt() to avoid triggering the state machine if the PHY
is suspended. Signal wakeup instead if the attached net_device or its
parent has been configured as a wakeup source. (Those conditions are
identical to mdio_bus_phy_may_suspend().) Postpone handling of the
interrupt until the PHY has resumed.
Before stopping the phy_state_machine() in mdio_bus_phy_suspend(),
wait for a concurrent phy_interrupt() to run to completion. That is
necessary because phy_interrupt() may have checked the PHY's suspend
status before the system sleep transition commenced and it may thus
retrigger the state machine after it was stopped.
Likewise, after re-enabling interrupt handling in mdio_bus_phy_resume(),
wait for a concurrent phy_interrupt() to complete to ensure that
interrupts which it postponed are properly rerun.
The issue was exposed by commit
1ce8b37241ed ("usbnet: smsc95xx: Forward
PHY interrupts to PHY driver to avoid polling"), but has existed since
forever.
Fixes:
541cd3ee00a4 ("phylib: Fix deadlock on resume")
Link: https://lore.kernel.org/netdev/a5315a8a-32c2-962f-f696-de9a26d30091@samsung.com/
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable@vger.kernel.org # v2.6.33+
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/b7f386d04e9b5b0e2738f0125743e30676f309ef.1656410895.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oliver Neukum [Tue, 28 Jun 2022 09:35:17 +0000 (11:35 +0200)]
usbnet: fix memory allocation in helpers
usbnet provides some helper functions that are also used in
the context of reset() operations. During a reset the other
drivers on a device are unable to operate. As that can be block
drivers, a driver for another interface cannot use paging
in its memory allocations without risking a deadlock.
Use GFP_NOIO in the helpers.
Fixes:
877bd862f32b8 ("usbnet: introduce usbnet 3 command helpers")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220628093517.7469-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Coleman Dietsch [Tue, 28 Jun 2022 17:47:44 +0000 (12:47 -0500)]
selftests net: fix kselftest net fatal error
The incorrect path is causing the following error when trying to run net
kselftests:
In file included from bpf/nat6to4.c:43:
../../../lib/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found
^~~~~~~~~~~~~~~~~~~
1 error generated.
Fixes:
cf67838c4422 ("selftests net: fix bpf build error")
Signed-off-by: Coleman Dietsch <dietschc@csp.edu>
Link: https://lore.kernel.org/r/20220628174744.7908-1-dietschc@csp.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 30 Jun 2022 03:09:32 +0000 (20:09 -0700)]
Merge git://git./linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Restore set counter when one of the CPU loses race to add elements
to sets.
2) After NF_STOLEN, skb might be there no more, update nftables trace
infra to avoid access to skb in this case. From Florian Westphal.
3) nftables bridge might register a prerouting hook with zero priority,
br_netfilter incorrectly skips it. Also from Florian.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: br_netfilter: do not skip all hooks with 0 priority
netfilter: nf_tables: avoid skb access on nf_stolen
netfilter: nft_dynset: restore set element counter when failing to update
====================
Link: https://lore.kernel.org/r/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 29 Jun 2022 16:32:06 +0000 (09:32 -0700)]
Merge tag 'platform-drivers-x86-v5.19-3' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- thinkpad_acpi/ideapad-laptop: mem-leak and platform-profile fixes
- panasonic-laptop: missing hotkey presses regression fix
- some hardware-id additions
- some other small fixes
* tag 'platform-drivers-x86-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: hp-wmi: Ignore Sanitization Mode event
platform/x86: thinkpad_acpi: do not use PSC mode on Intel platforms
platform/x86: thinkpad-acpi: profile capabilities as integer
platform/x86: panasonic-laptop: filter out duplicate volume up/down/mute keypresses
platform/x86: panasonic-laptop: don't report duplicate brightness key-presses
platform/x86: panasonic-laptop: revert "Resolve hotkey double trigger bug"
platform/x86: panasonic-laptop: sort includes alphabetically
platform/x86: panasonic-laptop: de-obfuscate button codes
ACPI: video: Change how we determine if brightness key-presses are handled
platform/x86: ideapad-laptop: Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[]
platform/x86: ideapad-laptop: Add allow_v4_dytc module parameter
platform/x86: thinkpad_acpi: Fix a memory leak of EFCH MMIO resource
platform/mellanox: nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices()
platform/x86: intel/pmc: Add Alder Lake N support to PMC core driver
Linus Torvalds [Wed, 29 Jun 2022 16:20:40 +0000 (09:20 -0700)]
Merge tag '5.19-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- seek null check (don't use f_seek op directly and blindly)
- offset validation in FSCTL_SET_ZERO_DATA
- fallocate fix (relates e.g. to xfstests generic/091 and 263)
- two cleanup fixes
- fix socket settings on some arch
* tag '5.19-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: use vfs_llseek instead of dereferencing NULL
ksmbd: check invalid FileOffset and BeyondFinalZero in FSCTL_ZERO_DATA
ksmbd: set the range of bytes to zero without extending file size in FSCTL_ZERO_DATA
ksmbd: remove duplicate flag set in smb2_write
ksmbd: smbd: Remove useless license text when SPDX-License-Identifier is already used
ksmbd: use SOCK_NONBLOCK type for kernel_accept()
Michael Walle [Mon, 27 Jun 2022 17:06:43 +0000 (19:06 +0200)]
NFC: nxp-nci: don't print header length mismatch on i2c error
Don't print a misleading header length mismatch error if the i2c call
returns an error. Instead just return the error code without any error
message.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Mon, 27 Jun 2022 17:06:42 +0000 (19:06 +0200)]
NFC: nxp-nci: Don't issue a zero length i2c_master_read()
There are packets which doesn't have a payload. In that case, the second
i2c_master_read() will have a zero length. But because the NFC
controller doesn't have any data left, it will NACK the I2C read and
-ENXIO will be returned. In case there is no payload, just skip the
second i2c master read.
Fixes:
6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangyu Hua [Wed, 29 Jun 2022 06:34:18 +0000 (14:34 +0800)]
net: tipc: fix possible refcount leak in tipc_sk_create()
Free sk in case tipc_sk_insert() fails.
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Krzysztof Kozlowski [Mon, 27 Jun 2022 12:40:48 +0000 (14:40 +0200)]
nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.
Reported-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Fixes:
caf6e49bf6d0 ("NFC: nfcmrvl: add spi driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627124048.296253-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YueHaibing [Tue, 28 Jun 2022 03:31:34 +0000 (11:31 +0800)]
net: ipv6: unexport __init-annotated seg6_hmac_net_init()
As of commit
5801f064e351 ("net: ipv6: unexport __init-annotated seg6_hmac_init()"),
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
This remove the EXPORT_SYMBOL to fix modpost warning:
WARNING: modpost: vmlinux.o(___ksymtab+seg6_hmac_net_init+0x0): Section mismatch in reference from the variable __ksymtab_seg6_hmac_net_init to the function .init.text:seg6_hmac_net_init()
The symbol seg6_hmac_net_init is exported and annotated __init
Fix this by removing the __init annotation of seg6_hmac_net_init or drop the export.
Fixes:
bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220628033134.21088-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
katrinzhou [Tue, 28 Jun 2022 03:50:30 +0000 (11:50 +0800)]
ipv6/sit: fix ipip6_tunnel_get_prl return value
When kcalloc fails, ipip6_tunnel_get_prl() should return -ENOMEM.
Move the position of label "out" to return correctly.
Addresses-Coverity: ("Unused value")
Fixes:
300aaeeaab5f ("[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL.")
Signed-off-by: katrinzhou <katrinzhou@tencent.com>
Reviewed-by: Eric Dumazet<edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220628035030.1039171-1-zys.zljxml@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 29 Jun 2022 03:45:46 +0000 (20:45 -0700)]
Merge branch 'mptcp-fixes-for-5-19'
Mat Martineau says:
====================
mptcp: Fixes for 5.19
Several categories of fixes from the mptcp tree:
Patches 1-3 are fixes related to MP_FAIL and FASTCLOSE, to make sure
MIBs are accurate, and to handle MP_FAIL transmission and responses at
the correct times. sk_timer conflicts are also resolved.
Patches 4 and 6 handle two separate race conditions, one at socket
shutdown and one with unaccepted subflows.
Patch 5 makes sure read operations are not blocked during fallback to
TCP.
Patch 7 improves the diag selftest, which were incorrectly failing on
slow machines (like the VMs used for CI testing).
Patch 8 avoids possible symbol redefinition errors in the userspace
mptcp.h file.
Patch 9 fixes a selftest build issue with gcc 12.
====================
Link: https://lore.kernel.org/r/20220628010243.166605-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mat Martineau [Tue, 28 Jun 2022 01:02:43 +0000 (18:02 -0700)]
selftests: mptcp: Initialize variables to quiet gcc 12 warnings
In a few MPTCP selftest tools, gcc 12 complains that the 'sock' variable
might be used uninitialized. This is a false positive because the only
code path that could lead to uninitialized access is where getaddrinfo()
fails, but the local xgetaddrinfo() wrapper exits if such a failure
occurs.
Initialize the 'sock' variable anyway to allow the tools to build with
gcc 12.
Fixes:
048d19d444be ("mptcp: add basic kselftest for mptcp")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ossama Othman [Tue, 28 Jun 2022 01:02:42 +0000 (18:02 -0700)]
mptcp: fix conflict with <netinet/in.h>
Including <linux/mptcp.h> before the C library <netinet/in.h> header
causes symbol redefinition errors at compile-time due to duplicate
declarations and definitions in the <linux/in.h> header included by
<linux/mptcp.h>.
Explicitly include <netinet/in.h> before <linux/in.h> in
<linux/mptcp.h> when __KERNEL__ is not defined so that the C library
compatibility logic in <linux/libc-compat.h> is enabled when including
<linux/mptcp.h> in user space code.
Fixes:
c11c5906bc0a ("mptcp: add MPTCP_SUBFLOW_ADDRS getsockopt support")
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 28 Jun 2022 01:02:41 +0000 (18:02 -0700)]
selftests: mptcp: more stable diag tests
The mentioned test-case still use an hard-coded-len sleep to
wait for a relative large number of connection to be established.
On very slow VM and with debug build such timeout could be exceeded,
causing failures in our CI.
Address the issue polling for the expected condition several times,
up to an unreasonable high amount of time. On reasonably fast system
the self-tests will be faster then before, on very slow one we will
still catch the correct condition.
Fixes:
df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 28 Jun 2022 01:02:40 +0000 (18:02 -0700)]
mptcp: fix race on unaccepted mptcp sockets
When the listener socket owning the relevant request is closed,
it frees the unaccepted subflows and that causes later deletion
of the paired MPTCP sockets.
The mptcp socket's worker can run in the time interval between such delete
operations. When that happens, any access to msk->first will cause an UaF
access, as the subflow cleanup did not cleared such field in the mptcp
socket.
Address the issue explicitly traversing the listener socket accept
queue at close time and performing the needed cleanup on the pending
msk.
Note that the locking is a bit tricky, as we need to acquire the msk
socket lock, while still owning the subflow socket one.
Fixes:
86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 28 Jun 2022 01:02:39 +0000 (18:02 -0700)]
mptcp: consistent map handling on failure
When the MPTCP receive path reach a non fatal fall-back condition, e.g.
when the MPC sockets must fall-back to TCP, the existing code is a little
self-inconsistent: it reports that new data is available - return true -
but sets the MPC flag to the opposite value.
As the consequence read operations in some exceptional scenario may block
unexpectedly.
Address the issue setting the correct MPC read status. Additionally avoid
some code duplication in the fatal fall-back scenario.
Fixes:
9c81be0dbc89 ("mptcp: add MP_FAIL response support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 28 Jun 2022 01:02:38 +0000 (18:02 -0700)]
mptcp: fix shutdown vs fallback race
If the MPTCP socket shutdown happens before a fallback
to TCP, and all the pending data have been already spooled,
we never close the TCP connection.
Address the issue explicitly checking for critical condition
at fallback time.
Fixes:
1e39e5a32ad7 ("mptcp: infinite mapping sending")
Fixes:
0348c690ed37 ("mptcp: add the fallback check")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Tue, 28 Jun 2022 01:02:37 +0000 (18:02 -0700)]
mptcp: invoke MP_FAIL response when needed
mptcp_mp_fail_no_response shouldn't be invoked on each worker run, it
should be invoked only when MP_FAIL response timeout occurs.
This patch refactors the MP_FAIL response logic.
It leverages the fact that only the MPC/first subflow can gracefully
fail to avoid unneeded subflows traversal: the failing subflow can
be only msk->first.
A new 'fail_tout' field is added to the subflow context to record the
MP_FAIL response timeout and use such field to reliably share the
timeout timer between the MP_FAIL event and the MPTCP socket close
timeout.
Finally, a new ack is generated to send out MP_FAIL notification as soon
as we hit the relevant condition, instead of waiting a possibly unbound
time for the next data packet.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/281
Fixes:
d9fb797046c5 ("mptcp: Do not traverse the subflow connection list without lock")
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 28 Jun 2022 01:02:36 +0000 (18:02 -0700)]
mptcp: introduce MAPPING_BAD_CSUM
This allow moving a couple of conditional out of the fast path,
making the code more easy to follow and will simplify the next
patch.
Fixes:
ae66fb2ba6c3 ("mptcp: Do TCP fallback on early DSS checksum failure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 28 Jun 2022 01:02:35 +0000 (18:02 -0700)]
mptcp: fix error mibs accounting
The current accounting for MP_FAIL and FASTCLOSE is not very
accurate: both can be increased even when the related option is
not really sent. Move the accounting into the correct place.
Fixes:
eb7f33654dc1 ("mptcp: add the mibs for MP_FAIL")
Fixes:
1e75629cb964 ("mptcp: add the mibs for MP_FASTCLOSE")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Malov [Tue, 28 Jun 2022 09:18:48 +0000 (12:18 +0300)]
xsk: Clear page contiguity bit when unmapping pool
When a XSK pool gets mapped, xp_check_dma_contiguity() adds bit 0x1
to pages' DMA addresses that go in ascending order and at 4K stride.
The problem is that the bit does not get cleared before doing unmap.
As a result, a lot of warnings from iommu_dma_unmap_page() are seen
in dmesg, which indicates that lookups by iommu_iova_to_phys() fail.
Fixes:
2b43470add8c ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220628091848.534803-1-ivan.malov@oktetlabs.ru
Kai-Heng Feng [Tue, 28 Jun 2022 12:37:26 +0000 (20:37 +0800)]
platform/x86: hp-wmi: Ignore Sanitization Mode event
After system resume the hp-wmi driver may complain:
[ 702.620180] hp_wmi: Unknown event_id - 23 - 0x0
According to HP it means 'Sanitization Mode' and it's harmless to just
ignore the event.
Cc: Jorge Lopez <jorge.lopez2@hp.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220628123726.250062-1-kai.heng.feng@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Mark Pearson [Mon, 27 Jun 2022 18:14:49 +0000 (14:14 -0400)]
platform/x86: thinkpad_acpi: do not use PSC mode on Intel platforms
PSC platform profile mode is only supported on Linux for AMD platforms.
Some older Intel platforms (e.g T490) are advertising it's capability
as Windows uses it - but on Linux we should only be using MMC profile
for Intel systems.
Add a check to prevent it being enabled incorrectly.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220627181449.3537-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Mark Pearson [Fri, 3 Jun 2022 17:02:09 +0000 (13:02 -0400)]
platform/x86: thinkpad-acpi: profile capabilities as integer
Currently the active mode (PSC/MMC) is stored in an enum and queried
throughout the driver.
Other driver changes will enumerate additional submodes that are relevant
to be tracked, so instead track PSC/MMC in a single integer variable.
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220603170212.164963-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Fri, 24 Jun 2022 11:23:39 +0000 (13:23 +0200)]
platform/x86: panasonic-laptop: filter out duplicate volume up/down/mute keypresses
On some Panasonic models the volume up/down/mute keypresses get
reported both through the Panasonic ACPI HKEY interface as well as
through the atkbd device.
Filter out the atkbd scan-codes for these to avoid reporting presses
twice.
Note normally we would leave the filtering of these to userspace by mapping
the scan-codes to KEY_UNKNOWN through /lib/udev/hwdb.d/60-keyboard.hwdb.
However in this case that would cause regressions since we were filtering
the Panasonic ACPI HKEY events before, so filter these in the kernel.
Fixes:
ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-7-hdegoede@redhat.com
Hans de Goede [Fri, 24 Jun 2022 11:23:38 +0000 (13:23 +0200)]
platform/x86: panasonic-laptop: don't report duplicate brightness key-presses
The brightness key-presses might also get reported by the ACPI video bus,
check for this and in this case don't report the presses to avoid reporting
2 presses for a single key-press.
Fixes:
ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-6-hdegoede@redhat.com
Hans de Goede [Fri, 24 Jun 2022 11:23:37 +0000 (13:23 +0200)]
platform/x86: panasonic-laptop: revert "Resolve hotkey double trigger bug"
In hindsight blindly throwing away most of the key-press events is not
a good idea. So revert commit
ed83c9171829 ("platform/x86:
panasonic-laptop: Resolve hotkey double trigger bug").
Fixes:
ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-5-hdegoede@redhat.com
Hans de Goede [Fri, 24 Jun 2022 11:23:36 +0000 (13:23 +0200)]
platform/x86: panasonic-laptop: sort includes alphabetically
Sort includes alphabetically, small cleanup patch in preparation of
further changes.
Fixes:
ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-4-hdegoede@redhat.com
Stefan Seyfried [Fri, 24 Jun 2022 11:23:35 +0000 (13:23 +0200)]
platform/x86: panasonic-laptop: de-obfuscate button codes
In the definition of panasonic_keymap[] the key codes are given in
decimal, later checks are done with hexadecimal values, which does
not help in understanding the code.
Additionally use two helper variables to shorten the code and make
the logic more obvious.
Fixes:
ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-3-hdegoede@redhat.com
Hans de Goede [Fri, 24 Jun 2022 11:23:34 +0000 (13:23 +0200)]
ACPI: video: Change how we determine if brightness key-presses are handled
Some systems have an ACPI video bus but not ACPI video devices with
backlight capability. On these devices brightness key-presses are
(logically) not reported through the ACPI video bus.
Change how acpi_video_handles_brightness_key_presses() determines if
brightness key-presses are handled by the ACPI video driver to avoid
vendor specific drivers/platform/x86 drivers filtering out their
brightness key-presses even though they are the only ones reporting
these presses.
Fixes:
ed83c9171829 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-2-hdegoede@redhat.com
Alexei Starovoitov [Mon, 27 Jun 2022 18:22:55 +0000 (20:22 +0200)]
bpf, docs: Better scale maintenance of BPF subsystem
The BPF subsystem consists of a large number of pieces. There is not a
single person that understands it all. Yet reviews are crucially important
for the BPF community to provide productive quality feedback to contributors
in a timely manner and therefore to ultimately expand the number of active
developers in the community.
So far, the BPF community had a two-stage review system, that is, a weekly
rotation among 7 developers (Alexei, Daniel, Andrii, Martin, Song, Yonghong,
John) as a first-level review of all inbound patches accompanied by a BPF CI
system which runs the in-tree BPF selftests to check for regressions for
every new patch, and then, a final check by Alexei, Daniel, Andrii to apply
the patches to either bpf or bpf-next trees.
This system worked well for the last ~3.5 years, but clearly reaches its
limits these days as it does not scale enough. Especially, as we also need
to allow enough room for every developer to contribute patches themselves,
integrate with their day to day job, and in particular avoid burnout. We
want to better scale both horizontally and vertically going forward.
On the horizontal scale, we are adding more developers (KP, Stan, Hao, Jiri)
to the overall core reviewer team, thus growing to 11 people in total. The
weekly rotation for the horizontal oncall reviewer is shortened to 1/2 week
(Mo - Wed and Thur - Fri). Instead of just patches, the coverage however
extends also generally to triage and reply to mailing list traffic (e.g. RFCs,
questions, etc).
On the vertical scale, there is clearly a need for deep expertise areas to
assign dedicated maintainer/reviewer teams that are responsible for code
reviews and help with design of individual building blocks. To some degree
we have been doing this implicitly, but the point is to formalize the teams
and commitment.
There is an overlap between areas and boundaries are intentionally grey. These
additional entries provide a guidance on who has to look at the patches. The
patch series which span multiple areas will be looked at by multiple people.
The vertical review with areas of deep expertise are bundled at the same time
with the horizontal side.
This patch cleans up a bit the BPF entries, adds mentioned developers to
the horizontal scale and creates new sub-entries with teams for developers
committing to the above outlined vertical scale. Also, pw.git tools we use
for BPF tree maintenance have been updated with a new pw-schedule script to
semi-automate vertical oncall review rotation.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@linux.dev>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Mykola Lysenko <mykolal@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Hao Luo <haoluo@google.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://git.kernel.org/pub/scm/linux/kernel/git/dborkman/pw.git
Link: https://lore.kernel.org/bpf/5bdc73e7f5a087299589944fa074563cdf2c2c1a.1656353995.git.daniel@iogearbox.net
Tao Liu [Mon, 27 Jun 2022 14:00:04 +0000 (22:00 +0800)]
linux/dim: Fix divide by 0 in RDMA DIM
Fix a divide 0 error in rdma_dim_stats_compare() when prev->cpe_ratio ==
0.
CallTrace:
Hardware name: H3C R4900 G3/RS33M2C9S, BIOS 2.00.37P21 03/12/2020
task:
ffff880194b78000 task.stack:
ffffc90006714000
RIP: 0010:backport_rdma_dim+0x10e/0x240 [mlx_compat]
RSP: 0018:
ffff880c10e83ec0 EFLAGS:
00010202
RAX:
0000000000002710 RBX:
ffff88096cd7f780 RCX:
0000000000000064
RDX:
0000000000000000 RSI:
0000000000000002 RDI:
0000000000000001
RBP:
0000000000000001 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
000000001d7c6c09
R13:
ffff88096cd7f780 R14:
ffff880b174fe800 R15:
0000000000000000
FS:
0000000000000000(0000) GS:
ffff880c10e80000(0000)
knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00000000a0965b00 CR3:
000000000200a003 CR4:
00000000007606e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Call Trace:
<IRQ>
ib_poll_handler+0x43/0x80 [ib_core]
irq_poll_softirq+0xae/0x110
__do_softirq+0xd1/0x28c
irq_exit+0xde/0xf0
do_IRQ+0x54/0xe0
common_interrupt+0x8f/0x8f
</IRQ>
? cpuidle_enter_state+0xd9/0x2a0
? cpuidle_enter_state+0xc7/0x2a0
? do_idle+0x170/0x1d0
? cpu_startup_entry+0x6f/0x80
? start_secondary+0x1b9/0x210
? secondary_startup_64+0xa5/0xb0
Code: 0f 87 e1 00 00 00 8b 4c 24 14 44 8b 43 14 89 c8 4d 63 c8 44 29 c0 99 31 d0 29 d0 31 d2 48 98 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <49> f7 f1 48 83 f8 0a 0f 86 c1 00 00 00 44 39 c1 7f 10 48 89 df
RIP: backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP:
ffff880c10e83ec0
Fixes:
f4915455dcf0 ("linux/dim: Implement RDMA adaptive moderation (DIM)")
Link: https://lore.kernel.org/r/20220627140004.3099-1-thomas.liu@ucloud.cn
Signed-off-by: Tao Liu <thomas.liu@ucloud.cn>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Eric Dumazet [Mon, 27 Jun 2022 10:28:13 +0000 (10:28 +0000)]
net: bonding: fix possible NULL deref in rlb code
syzbot has two reports involving the same root cause.
bond_alb_initialize() must not set bond->alb_info.rlb_enabled
if a memory allocation error is detected.
Report 1:
general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 0 PID: 12276 Comm: kworker/u4:10 Not tainted
5.19.0-rc3-syzkaller-00132-g3b89b511ea0c #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
RIP: 0010:rlb_clear_slave+0x10e/0x690 drivers/net/bonding/bond_alb.c:393
Code: 8e fc 83 fb ff 0f 84 74 02 00 00 e8 cc 2a 8e fc 48 8b 44 24 08 89 dd 48 c1 e5 06 4c 8d 34 28 49 8d 7e 14 48 89 f8 48 c1 e8 03 <42> 0f b6 14 20 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
RSP: 0018:
ffffc90018a8f678 EFLAGS:
00010203
RAX:
0000000000000002 RBX:
0000000000000000 RCX:
0000000000000000
RDX:
ffff88803375bb00 RSI:
ffffffff84ec4ac4 RDI:
0000000000000014
RBP:
0000000000000000 R08:
0000000000000005 R09:
00000000ffffffff
R10:
0000000000000000 R11:
0000000000000000 R12:
dffffc0000000000
R13:
ffff8880ac889000 R14:
0000000000000000 R15:
ffff88815a668c80
FS:
0000000000000000(0000) GS:
ffff8880b9a00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00005597077e10b0 CR3:
0000000026668000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
bond_alb_deinit_slave+0x43c/0x6b0 drivers/net/bonding/bond_alb.c:1663
__bond_release_one.cold+0x383/0xd53 drivers/net/bonding/bond_main.c:2370
bond_slave_netdev_event drivers/net/bonding/bond_main.c:3778 [inline]
bond_netdev_event+0x993/0xad0 drivers/net/bonding/bond_main.c:3889
notifier_call_chain+0xb5/0x200 kernel/notifier.c:87
call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945
call_netdevice_notifiers_extack net/core/dev.c:1983 [inline]
call_netdevice_notifiers net/core/dev.c:1997 [inline]
unregister_netdevice_many+0x948/0x18b0 net/core/dev.c:10839
default_device_exit_batch+0x449/0x590 net/core/dev.c:11333
ops_exit_list+0x125/0x170 net/core/net_namespace.c:167
cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594
process_one_work+0x996/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
</TASK>
Report 2:
general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
CPU: 1 PID: 5206 Comm: syz-executor.1 Not tainted
5.18.0-syzkaller-12108-g58f9d52ff689 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:rlb_req_update_slave_clients+0x109/0x2f0 drivers/net/bonding/bond_alb.c:502
Code: 5d 18 8f fc 41 80 3e 00 0f 85 a5 01 00 00 89 d8 48 c1 e0 06 49 03 84 24 68 01 00 00 48 8d 78 30 49 89 c7 48 89 fa 48 c1 ea 03 <80> 3c 2a 00 0f 85 98 01 00 00 4d 39 6f 30 75 83 e8 22 18 8f fc 49
RSP: 0018:
ffffc9000300ee80 EFLAGS:
00010206
RAX:
0000000000000000 RBX:
0000000000000000 RCX:
ffffc90016c11000
RDX:
0000000000000006 RSI:
ffffffff84eb6bf3 RDI:
0000000000000030
RBP:
dffffc0000000000 R08:
0000000000000005 R09:
00000000ffffffff
R10:
0000000000000000 R11:
0000000000000000 R12:
ffff888027c80c80
R13:
ffff88807d7ff800 R14:
ffffed1004f901bd R15:
0000000000000000
FS:
00007f6f46c58700(0000) GS:
ffff8880b9b00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000020010000 CR3:
00000000516cc000 CR4:
00000000003506e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
alb_fasten_mac_swap+0x886/0xa80 drivers/net/bonding/bond_alb.c:1070
bond_alb_handle_active_change+0x624/0x1050 drivers/net/bonding/bond_alb.c:1765
bond_change_active_slave+0xfa1/0x29b0 drivers/net/bonding/bond_main.c:1173
bond_select_active_slave+0x23f/0xa50 drivers/net/bonding/bond_main.c:1253
bond_enslave+0x3b34/0x53b0 drivers/net/bonding/bond_main.c:2159
do_set_master+0x1c8/0x220 net/core/rtnetlink.c:2577
rtnl_newlink_create net/core/rtnetlink.c:3380 [inline]
__rtnl_newlink+0x13ac/0x17e0 net/core/rtnetlink.c:3580
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593
rtnetlink_rcv_msg+0x43a/0xc90 net/core/rtnetlink.c:6089
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2492
___sys_sendmsg+0xf3/0x170 net/socket.c:2546
__sys_sendmsg net/socket.c:2575 [inline]
__do_sys_sendmsg net/socket.c:2584 [inline]
__se_sys_sendmsg net/socket.c:2582 [inline]
__x64_sys_sendmsg+0x132/0x220 net/socket.c:2582
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f6f45a89109
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007f6f46c58168 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00007f6f45b9c030 RCX:
00007f6f45a89109
RDX:
0000000000000000 RSI:
0000000020000080 RDI:
0000000000000006
RBP:
00007f6f45ae308d R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
R13:
00007ffed99029af R14:
00007f6f46c58300 R15:
0000000000022000
</TASK>
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20220627102813.126264-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Amir Goldstein [Mon, 27 Jun 2022 17:47:19 +0000 (20:47 +0300)]
fanotify: refine the validation checks on non-dir inode mask
Commit
ceaf69f8eadc ("fanotify: do not allow setting dirent events in
mask of non-dir") added restrictions about setting dirent events in the
mask of a non-dir inode mark, which does not make any sense.
For backward compatibility, these restictions were added only to new
(v5.17+) APIs.
It also does not make any sense to set the flags FAN_EVENT_ON_CHILD or
FAN_ONDIR in the mask of a non-dir inode. Add these flags to the
dir-only restriction of the new APIs as well.
Move the check of the dir-only flags for new APIs into the helper
fanotify_events_supported(), which is only called for FAN_MARK_ADD,
because there is no need to error on an attempt to remove the dir-only
flags from non-dir inode.
Fixes:
ceaf69f8eadc ("fanotify: do not allow setting dirent events in mask of non-dir")
Link: https://lore.kernel.org/linux-fsdevel/20220627113224.kr2725conevh53u4@quack3.lan/
Link: https://lore.kernel.org/r/20220627174719.2838175-1-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Nicolas Dichtel [Thu, 23 Jun 2022 12:00:15 +0000 (14:00 +0200)]
ipv6: take care of disable_policy when restoring routes
When routes corresponding to addresses are restored by
fixup_permanent_addr(), the dst_nopolicy parameter was not set.
The typical use case is a user that configures an address on a down
interface and then put this interface up.
Let's take care of this flag in addrconf_f6i_alloc(), so that every callers
benefit ont it.
CC: stable@kernel.org
CC: David Forster <dforster@brocade.com>
Fixes:
df789fe75206 ("ipv6: Provide ipv6 version of "disable_policy" sysctl")
Reported-by: Siwar Zitouni <siwar.zitouni@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220623120015.32640-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel [Fri, 24 Jun 2022 07:51:39 +0000 (09:51 +0200)]
net: usb: asix: do not force pause frames support
We should respect link partner capabilities and not force flow control
support on every link. Even more, in current state the MAC driver do not
advertises pause support so we should not keep flow control enabled at
all.
Fixes:
e532a096be0e ("net: usb: asix: ax88772: add phylib support")
Reported-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Anton Lundin <glance@acc.umu.se>
Link: https://lore.kernel.org/r/20220624075139.3139300-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel [Fri, 24 Jun 2022 07:51:38 +0000 (09:51 +0200)]
net: asix: fix "can't send until first packet is send" issue
If cable is attached after probe sequence, the usbnet framework would
not automatically start processing RX packets except at least one
packet was transmitted.
On systems with any kind of address auto configuration this issue was
not detected, because some packets are send immediately after link state
is changed to "running".
With this patch we will notify usbnet about link status change provided by the
PHYlib.
Fixes:
e532a096be0e ("net: usb: asix: ax88772: add phylib support")
Reported-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Anton Lundin <glance@acc.umu.se>
Link: https://lore.kernel.org/r/20220624075139.3139300-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Walle [Sun, 26 Jun 2022 20:00:39 +0000 (22:00 +0200)]
MAINTAINERS: nfc: drop Charles Gorand from NXP-NCI
Mails to Charles get an auto reply, that he is no longer working at
Eff'Innov technologies. Drop the entry and mark the driver as orphaned.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220626200039.4062784-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shreenidhi Shedi [Sun, 26 Jun 2022 13:29:47 +0000 (18:59 +0530)]
octeon_ep: use bitwise AND
This should be bitwise operator not logical.
Fixes:
862cd659a6fb ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Shreenidhi Shedi <sshedi@vmware.com>
Link: https://lore.kernel.org/r/20220626132947.3992423-1-sshedi@vmware.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 28 Jun 2022 04:51:29 +0000 (21:51 -0700)]
Merge branch 'notify-user-space-if-any-actions-were-flushed-before-error'
Victor Nogueira says:
====================
Notify user space if any actions were flushed before error
This patch series fixes the behaviour of actions flush so that the
kernel always notifies user space whenever it deletes actions during a
flush operation, even if it didn't flush all the actions. This series
also introduces tdc tests to verify this new behaviour.
====================
Link: https://lore.kernel.org/r/20220623140742.684043-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Victor Nogueira [Thu, 23 Jun 2022 14:07:42 +0000 (11:07 -0300)]
selftests: tc-testing: Add testcases to test new flush behaviour
Add tdc test cases to verify new flush behaviour is correct, which do
the following:
- Try to flush only one action which is being referenced by a filter
- Try to flush three actions where the last one (index 3) is being
referenced by a filter
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Victor Nogueira [Thu, 23 Jun 2022 14:07:41 +0000 (11:07 -0300)]
net/sched: act_api: Notify user space if any actions were flushed before error
If during an action flush operation one of the actions is still being
referenced, the flush operation is aborted and the kernel returns to
user space with an error. However, if the kernel was able to flush, for
example, 3 actions and failed on the fourth, the kernel will not notify
user space that it deleted 3 actions before failing.
This patch fixes that behaviour by notifying user space of how many
actions were deleted before flush failed and by setting extack with a
message describing what happened.
Fixes:
55334a5db5cd ("net_sched: act: refuse to remove bound action outside")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tong Zhang [Mon, 27 Jun 2022 04:33:48 +0000 (21:33 -0700)]
epic100: fix use after free on rmmod
epic_close() calls epic_rx() and uses dma buffer, but in epic_remove_one()
we already freed the dma buffer. To fix this issue, reorder function calls
like in the .probe function.
BUG: KASAN: use-after-free in epic_rx+0xa6/0x7e0 [epic100]
Call Trace:
epic_rx+0xa6/0x7e0 [epic100]
epic_close+0xec/0x2f0 [epic100]
unregister_netdev+0x18/0x20
epic_remove_one+0xaa/0xf0 [epic100]
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Yilun Wu <yiluwu@cs.stonybrook.edu>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Francois Romieu <romieu@fr.zoreil.com>
Link: https://lore.kernel.org/r/20220627043351.25615-1-ztong0001@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 23 Jun 2022 04:21:05 +0000 (21:21 -0700)]
net: tun: stop NAPI when detaching queues
While looking at a syzbot report I noticed the NAPI only gets
disabled before it's deleted. I think that user can detach
the queue before destroying the device and the NAPI will never
be stopped.
Fixes:
943170998b20 ("tun: enable NAPI for TUN/TAP driver")
Acked-by: Petar Penkov <ppenkov@aviatrix.com>
Link: https://lore.kernel.org/r/20220623042105.2274812-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Mon, 27 Jun 2022 17:47:34 +0000 (10:47 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Fixes all over the place, most notably we are disabling
IRQ hardening (again!)"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_ring: make vring_create_virtqueue_split prettier
vhost-vdpa: call vhost_vdpa_cleanup during the release
virtio_mmio: Restore guest page size on resume
virtio_mmio: Add missing PM calls to freeze/restore
caif_virtio: fix race between virtio_device_ready() and ndo_open()
virtio-net: fix race between ndo_open() and virtio_device_ready()
virtio: disable notification hardening by default
virtio: Remove unnecessary variable assignments
virtio_ring : keep used_wrap_counter in vq->last_used_idx
vduse: Tie vduse mgmtdev and its device
vdpa/mlx5: Initialize CVQ vringh only once
vdpa/mlx5: Update Control VQ callback information
Masahiro Yamada [Mon, 27 Jun 2022 03:22:09 +0000 (12:22 +0900)]
tick/nohz: unexport __init-annotated tick_nohz_full_setup()
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
modpost used to detect it, but it had been broken for a decade.
Commit
28438794aba4 ("modpost: fix section mismatch check for exported
init/exit sections") fixed it so modpost started to warn it again, then
this showed up:
MODPOST vmlinux.symvers
WARNING: modpost: vmlinux.o(___ksymtab_gpl+tick_nohz_full_setup+0x0): Section mismatch in reference from the variable __ksymtab_tick_nohz_full_setup to the function .init.text:tick_nohz_full_setup()
The symbol tick_nohz_full_setup is exported and annotated __init
Fix this by removing the __init annotation of tick_nohz_full_setup or drop the export.
Drop the export because tick_nohz_full_setup() is only called from the
built-in code in kernel/sched/isolation.c.
Fixes:
ae9e557b5be2 ("time: Export tick start/stop functions for rcutorture")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Florian Westphal [Tue, 21 Jun 2022 16:26:03 +0000 (18:26 +0200)]
netfilter: br_netfilter: do not skip all hooks with 0 priority
When br_netfilter module is loaded, skbs may be diverted to the
ipv4/ipv6 hooks, just like as if we were routing.
Unfortunately, bridge filter hooks with priority 0 may be skipped
in this case.
Example:
1. an nftables bridge ruleset is loaded, with a prerouting
hook that has priority 0.
2. interface is added to the bridge.
3. no tcp packet is ever seen by the bridge prerouting hook.
4. flush the ruleset
5. load the bridge ruleset again.
6. tcp packets are processed as expected.
After 1) the only registered hook is the bridge prerouting hook, but its
not called yet because the bridge hasn't been brought up yet.
After 2), hook order is:
0 br_nf_pre_routing // br_netfilter internal hook
0 chain bridge f prerouting // nftables bridge ruleset
The packet is diverted to br_nf_pre_routing.
If call-iptables is off, the nftables bridge ruleset is called as expected.
But if its enabled, br_nf_hook_thresh() will skip it because it assumes
that all 0-priority hooks had been called previously in bridge context.
To avoid this, check for the br_nf_pre_routing hook itself, we need to
resume directly after it, even if this hook has a priority of 0.
Unfortunately, this still results in different packet flow.
With this fix, the eval order after in 3) is:
1. br_nf_pre_routing
2. ip(6)tables (if enabled)
3. nftables bridge
but after 5 its the much saner:
1. nftables bridge
2. br_nf_pre_routing
3. ip(6)tables (if enabled)
Unfortunately I don't see a solution here:
It would be possible to move br_nf_pre_routing to a higher priority
so that it will be called later in the pipeline, but this also impacts
ebtables evaluation order, and would still result in this very ordering
problem for all nftables-bridge hooks with the same priority as the
br_nf_pre_routing one.
Searching back through the git history I don't think this has
ever behaved in any other way, hence, no fixes-tag.
Reported-by: Radim Hrazdil <rhrazdil@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal [Wed, 22 Jun 2022 14:43:57 +0000 (16:43 +0200)]
netfilter: nf_tables: avoid skb access on nf_stolen
When verdict is NF_STOLEN, the skb might have been freed.
When tracing is enabled, this can result in a use-after-free:
1. access to skb->nf_trace
2. access to skb->mark
3. computation of trace id
4. dump of packet payload
To avoid 1, keep a cached copy of skb->nf_trace in the
trace state struct.
Refresh this copy whenever verdict is != STOLEN.
Avoid 2 by skipping skb->mark access if verdict is STOLEN.
3 is avoided by precomputing the trace id.
Only dump the packet when verdict is not "STOLEN".
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Tue, 21 Jun 2022 12:01:41 +0000 (14:01 +0200)]
netfilter: nft_dynset: restore set element counter when failing to update
This patch fixes a race condition.
nft_rhash_update() might fail for two reasons:
- Element already exists in the hashtable.
- Another packet won race to insert an entry in the hashtable.
In both cases, new() has already bumped the counter via atomic_add_unless(),
therefore, decrement the set element counter.
Fixes:
22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Hans de Goede [Mon, 27 Jun 2022 13:08:50 +0000 (15:08 +0200)]
platform/x86: ideapad-laptop: Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[]
The Ideapad 5 15ITL05 uses DYTC version 4 for platform-profile
control. This has been tested successfully with the ideapad-laptop
DYTC version 5 code; Add the Ideapad 5 15ITL05 to the
ideapad_dytc_v4_allow_table[].
Fixes:
599482c58ebd ("platform/x86: ideapad-laptop: Add platform support for Ideapad 5 Pro 16ACH6-82L5")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213297
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220627130850.313537-1-hdegoede@redhat.com
Hans de Goede [Thu, 23 Jun 2022 11:59:14 +0000 (13:59 +0200)]
platform/x86: ideapad-laptop: Add allow_v4_dytc module parameter
Add an allow_v4_dytc module parameter to allow users to easily test if
DYTC version 4 platform-profiles work on their laptop.
Fixes:
599482c58ebd ("platform/x86: ideapad-laptop: Add platform support for Ideapad 5 Pro 16ACH6-82L5")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213297
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220623115914.103001-1-hdegoede@redhat.com
Deming Wang [Wed, 22 Jun 2022 19:23:06 +0000 (15:23 -0400)]
virtio_ring: make vring_create_virtqueue_split prettier
Add some spaces to vring_alloc_queue(make it look prettier).
Signed-off-by: Deming Wang <wangdeming@inspur.com>
Message-Id: <
20220622192306.4371-1-wangdeming@inspur.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stefano Garzarella [Wed, 22 Jun 2022 15:14:07 +0000 (17:14 +0200)]
vhost-vdpa: call vhost_vdpa_cleanup during the release
Before commit
3d5698793897 ("vhost-vdpa: introduce asid based IOTLB")
we call vhost_vdpa_iotlb_free() during the release to clean all regions
mapped in the iotlb.
That commit removed vhost_vdpa_iotlb_free() and added vhost_vdpa_cleanup()
to do some cleanup, including deleting all mappings, but we forgot to call
it in vhost_vdpa_release().
This causes that if an application does not remove all mappings explicitly
(or it crashes), the mappings remain in the iotlb and subsequent
applications may fail if they map the same addresses.
Calling vhost_vdpa_cleanup() also fixes a memory leak since we are not
freeing `v->vdev.vqs` during the release from the same commit.
Since vhost_vdpa_cleanup() calls vhost_dev_cleanup() we can remove its
call from vhost_vdpa_release().
Fixes:
3d5698793897 ("vhost-vdpa: introduce asid based IOTLB")
Cc: gautam.dawar@xilinx.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <
20220622151407.51232-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Stephan Gerhold [Tue, 21 Jun 2022 11:06:21 +0000 (13:06 +0200)]
virtio_mmio: Restore guest page size on resume
Virtio devices might lose their state when the VMM is restarted
after a suspend to disk (hibernation) cycle. This means that the
guest page size register must be restored for the virtio_mmio legacy
interface, since otherwise the virtio queues are not functional.
This is particularly problematic for QEMU that currently still defaults
to using the legacy interface for virtio_mmio. Write the guest page
size register again in virtio_mmio_restore() to make legacy virtio_mmio
devices work correctly after hibernation.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Message-Id: <
20220621110621.
3638025-3-stephan.gerhold@kernkonzept.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stephan Gerhold [Tue, 21 Jun 2022 11:06:20 +0000 (13:06 +0200)]
virtio_mmio: Add missing PM calls to freeze/restore
Most virtio drivers provide freeze/restore callbacks to finish up
device usage before suspend and to reinitialize the virtio device after
resume. However, these callbacks are currently only called when using
virtio_pci. virtio_mmio does not have any PM ops defined.
This causes problems for example after suspend to disk (hibernation),
since the virtio devices might lose their state after the VMM is
restarted. Calling virtio_device_freeze()/restore() ensures that
the virtio devices are re-initialized correctly.
Fix this by implementing the dev_pm_ops for virtio_mmio,
similar to virtio_pci_common.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Message-Id: <
20220621110621.
3638025-2-stephan.gerhold@kernkonzept.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Mon, 20 Jun 2022 05:11:14 +0000 (13:11 +0800)]
caif_virtio: fix race between virtio_device_ready() and ndo_open()
We currently depend on probe() calling virtio_device_ready() -
which happens after netdev
registration. Since ndo_open() can be called immediately
after register_netdev, this means there exists a race between
ndo_open() and virtio_device_ready(): the driver may start to use the
device (e.g. TX) before DRIVER_OK which violates the spec.
Fix this by switching to use register_netdevice() and protect the
virtio_device_ready() with rtnl_lock() to make sure ndo_open() can
only be called after virtio_device_ready().
Fixes:
0d2e1a2926b18 ("caif_virtio: Introduce caif over virtio")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <
20220620051115.3142-3-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Fri, 17 Jun 2022 07:29:49 +0000 (15:29 +0800)]
virtio-net: fix race between ndo_open() and virtio_device_ready()
We currently call virtio_device_ready() after netdev
registration. Since ndo_open() can be called immediately
after register_netdev, this means there exists a race between
ndo_open() and virtio_device_ready(): the driver may start to use the
device before DRIVER_OK which violates the spec.
Fix this by switching to use register_netdevice() and protect the
virtio_device_ready() with rtnl_lock() to make sure ndo_open() can
only be called after virtio_device_ready().
Fixes:
4baf1e33d0842 ("virtio_net: enable VQs early")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <
20220617072949.30734-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Xin Long [Fri, 24 Jun 2022 16:24:31 +0000 (12:24 -0400)]
tipc: move bc link creation back to tipc_node_create
Shuang Li reported a NULL pointer dereference crash:
[] BUG: kernel NULL pointer dereference, address:
0000000000000068
[] RIP: 0010:tipc_link_is_up+0x5/0x10 [tipc]
[] Call Trace:
[] <IRQ>
[] tipc_bcast_rcv+0xa2/0x190 [tipc]
[] tipc_node_bc_rcv+0x8b/0x200 [tipc]
[] tipc_rcv+0x3af/0x5b0 [tipc]
[] tipc_udp_recv+0xc7/0x1e0 [tipc]
It was caused by the 'l' passed into tipc_bcast_rcv() is NULL. When it
creates a node in tipc_node_check_dest(), after inserting the new node
into hashtable in tipc_node_create(), it creates the bc link. However,
there is a gap between this insert and bc link creation, a bc packet
may come in and get the node from the hashtable then try to dereference
its bc link, which is NULL.
This patch is to fix it by moving the bc link creation before inserting
into the hashtable.
Note that for a preliminary node becoming "real", the bc link creation
should also be called before it's rehashed, as we don't create it for
preliminary nodes.
Fixes:
4cbf8ac2fe5a ("tipc: enable creating a "preliminary" node")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 24 Jun 2022 15:30:20 +0000 (15:30 +0000)]
tunnels: do not assume mac header is set in skb_tunnel_check_pmtu()
Recently added debug in commit
f9aefd6b2aa3 ("net: warn if mac header
was not set") caught a bug in skb_tunnel_check_pmtu(), as shown
in this syzbot report [1].
In ndo_start_xmit() paths, there is really no need to use skb->mac_header,
because skb->data is supposed to point at it.
[1] WARNING: CPU: 1 PID: 8604 at include/linux/skbuff.h:2784 skb_mac_header_len include/linux/skbuff.h:2784 [inline]
WARNING: CPU: 1 PID: 8604 at include/linux/skbuff.h:2784 skb_tunnel_check_pmtu+0x5de/0x2f90 net/ipv4/ip_tunnel_core.c:413
Modules linked in:
CPU: 1 PID: 8604 Comm: syz-executor.3 Not tainted
5.19.0-rc2-syzkaller-00443-g8720bd951b8e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:skb_mac_header_len include/linux/skbuff.h:2784 [inline]
RIP: 0010:skb_tunnel_check_pmtu+0x5de/0x2f90 net/ipv4/ip_tunnel_core.c:413
Code: 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 80 3c 02 00 0f 84 b9 fe ff ff 4c 89 ff e8 7c 0f d7 f9 e9 ac fe ff ff e8 c2 13 8a f9 <0f> 0b e9 28 fc ff ff e8 b6 13 8a f9 48 8b 54 24 70 48 b8 00 00 00
RSP: 0018:
ffffc90002e4f520 EFLAGS:
00010212
RAX:
0000000000000324 RBX:
ffff88804d5fd500 RCX:
ffffc90005b52000
RDX:
0000000000040000 RSI:
ffffffff87f05e3e RDI:
0000000000000003
RBP:
ffffc90002e4f650 R08:
0000000000000003 R09:
000000000000ffff
R10:
000000000000ffff R11:
0000000000000000 R12:
000000000000ffff
R13:
0000000000000000 R14:
000000000000ffcd R15:
000000000000001f
FS:
00007f3babba9700(0000) GS:
ffff8880b9b00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000020000080 CR3:
0000000075319000 CR4:
00000000003506e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
geneve_xmit_skb drivers/net/geneve.c:927 [inline]
geneve_xmit+0xcf8/0x35d0 drivers/net/geneve.c:1107
__netdev_start_xmit include/linux/netdevice.h:4805 [inline]
netdev_start_xmit include/linux/netdevice.h:4819 [inline]
__dev_direct_xmit+0x500/0x730 net/core/dev.c:4309
dev_direct_xmit include/linux/netdevice.h:3007 [inline]
packet_direct_xmit+0x1b8/0x2c0 net/packet/af_packet.c:282
packet_snd net/packet/af_packet.c:3073 [inline]
packet_sendmsg+0x21f4/0x55d0 net/packet/af_packet.c:3104
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2489
___sys_sendmsg+0xf3/0x170 net/socket.c:2543
__sys_sendmsg net/socket.c:2572 [inline]
__do_sys_sendmsg net/socket.c:2581 [inline]
__se_sys_sendmsg net/socket.c:2579 [inline]
__x64_sys_sendmsg+0x132/0x220 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f3baaa89109
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007f3babba9168 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00007f3baab9bf60 RCX:
00007f3baaa89109
RDX:
0000000000000000 RSI:
0000000020000a00 RDI:
0000000000000003
RBP:
00007f3baaae305d R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
R13:
00007ffe74f2543f R14:
00007f3babba9300 R15:
0000000000022000
</TASK>
Fixes:
4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jean Delvare [Tue, 21 Jun 2022 13:55:11 +0000 (15:55 +0200)]
platform/x86: thinkpad_acpi: Fix a memory leak of EFCH MMIO resource
Unlike release_mem_region(), a call to release_resource() does not
free the resource, so it has to be freed explicitly to avoid a memory
leak.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes:
455cd867b85b ("platform/x86: thinkpad_acpi: Add a s2idle resume quirk for a number of laptops")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220621155511.5b266395@endymion.delvare
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Dan Carpenter [Wed, 15 Jun 2022 08:11:07 +0000 (11:11 +0300)]
platform/mellanox: nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices()
This should return PTR_ERR() instead of IS_ERR(). Also "dev->client"
has been set to NULL by this point so it returns 0/success so preserve
the error code earlier.
Fixes:
662f24826f95 ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/YqmUGwmPK7cPolk/@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Gayatri Kammela [Wed, 15 Jun 2022 00:27:51 +0000 (17:27 -0700)]
platform/x86: intel/pmc: Add Alder Lake N support to PMC core driver
Add Alder Lake N (ADL-N) to the list of the platforms that Intel's
PMC core driver supports. Alder Lake N reuses all the TigerLake PCH IPs.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20220615002751.3371730-1-gayatri.kammela@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Linus Torvalds [Sun, 26 Jun 2022 21:22:10 +0000 (14:22 -0700)]
Linux 5.19-rc4
Linus Torvalds [Sun, 26 Jun 2022 21:12:56 +0000 (14:12 -0700)]
Merge tag 'soc-fixes-5.19' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A number of fixes have accumulated, but they are largely for harmless
issues:
- Several OF node leak fixes
- A fix to the Exynos7885 UART clock description
- DTS fixes to prevent boot failures on TI AM64 and J721s2
- Bus probe error handling fixes for Baikal-T1
- A fixup to the way STM32 SoCs use separate dts files for different
firmware stacks
- Multiple code fixes for Arm SCMI firmware, all dealing with
robustness of the implementation
- Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT
nodes
- Three updates to the MAINTAINERS file, including Florian Fainelli
taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz
Julienne"
* tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
arm: mach-spear: Add missing of_node_put() in time.c
ARM: cns3xxx: Fix refcount leak in cns3xxx_init
MAINTAINERS: Update email address
arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
ARM: dts: bcm2711-rpi-400: Fix GPIO line names
bus: bt1-axi: Don't print error on -EPROBE_DEFER
bus: bt1-apb: Don't print error on -EPROBE_DEFER
ARM: Fix refcount leak in axxia_boot_secondary
ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15
soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain
ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity
ARM: dts: imx6qdl: correct PU regulator ramp delay
firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get
firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary
firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
MAINTAINERS: Update BCM2711/BCM2835 maintainer
...
Linus Torvalds [Sun, 26 Jun 2022 21:00:55 +0000 (14:00 -0700)]
Merge tag 'mm-hotfixes-stable-2022-06-26' of git://git./linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.
Fixes for this merge window:
- fix for a damon boot hang, from SeongJae
- fix for a kfence warning splat, from Jason Donenfeld
- fix for zero-pfn pinning, from Alex Williamson
- fix for fallocate hole punch clearing, from Mike Kravetz
Fixes for previous releases:
- fix for a performance regression, from Marcelo
- fix for a hwpoisining BUG from zhenwei pi"
* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Christian Marangi
mm/memory-failure: disable unpoison once hw error happens
hugetlbfs: zero partial pages during fallocate hole punch
mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
mm: re-allow pinning of zero pfns
mm/kfence: select random number before taking raw lock
MAINTAINERS: add maillist information for LoongArch
MAINTAINERS: update MM tree references
MAINTAINERS: update Abel Vesa's email
MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
mailmap: add alias for jarkko@profian.com
mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
mm: lru_cache_disable: use synchronize_rcu_expedited
mm/page_isolation.c: fix one kernel-doc comment
Linus Torvalds [Sun, 26 Jun 2022 19:12:25 +0000 (12:12 -0700)]
Merge tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Enable ignore_missing_thread in 'perf stat', enabling counting with
'--pid' when threads disappear during counting session setup
- Adjust output data offset for backward compatibility in 'perf inject'
- Fix missing free in copy_kcore_dir() in 'perf inject'
- Fix caching files with a wrong build ID
- Sync drm, cpufeatures, vhost and svn headers with the kernel
* tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
tools headers UAPI: Synch KVM's svm.h header with the kernel
tools include UAPI: Sync linux/vhost.h with the kernel sources
perf stat: Enable ignore_missing_thread
perf inject: Adjust output data offset for backward compatibility
perf trace beauty: Fix generation of errno id->str table on ALT Linux
perf build-id: Fix caching files with a wrong build ID
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
perf inject: Fix missing free in copy_kcore_dir()
Linus Torvalds [Sun, 26 Jun 2022 17:11:36 +0000 (10:11 -0700)]
Merge tag 'for-5.19-rc3-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- zoned relocation fixes:
- fix critical section end for extent writeback, this could lead
to out of order write
- prevent writing to previous data relocation block group if space
gets low
- reflink fixes:
- fix race between reflinking and ordered extent completion
- proper error handling when block reserve migration fails
- add missing inode iversion/mtime/ctime updates on each iteration
when replacing extents
- fix deadlock when running fsync/fiemap/commit at the same time
- fix false-positive KCSAN report regarding pid tracking for read locks
and data race
- minor documentation update and link to new site
* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Documentation: update btrfs list of features and link to readthedocs.io
btrfs: fix deadlock with fsync+fiemap+transaction commit
btrfs: don't set lock_owner when locking extent buffer for reading
btrfs: zoned: fix critical section of relocation inode writeback
btrfs: zoned: prevent allocation from previous data relocation BG
btrfs: do not BUG_ON() on failure to migrate space when replacing extents
btrfs: add missing inode updates on each iteration when replacing extents
btrfs: fix race between reflinking and ordered extent completion
projects / linux-2.6-microblaze.git / log