From: Mika Westerberg Date: Mon, 12 Apr 2021 11:12:47 +0000 (+0300) Subject: Documentation / thunderbolt: Clean up entries X-Git-Tag: microblaze-v5.15~65^2~8^2~25 X-Git-Url: http://git.monstr.eu/?p=linux-2.6-microblaze.git;a=commitdiff_plain;h=68977e61ab9e3fbb8ebbb1c7e8c772762d232f7c Documentation / thunderbolt: Clean up entries Align the "What" entries along with the rest and move nvm_authenticate_on_disconnect to correct place. Signed-off-by: Mika Westerberg --- diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt index c41c68f64693..05afeee05538 100644 --- a/Documentation/ABI/testing/sysfs-bus-thunderbolt +++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt @@ -1,4 +1,4 @@ -What: /sys/bus/thunderbolt/devices/.../domainX/boot_acl +What: /sys/bus/thunderbolt/devices/.../domainX/boot_acl Date: Jun 2018 KernelVersion: 4.17 Contact: thunderbolt-software@lists.01.org @@ -21,7 +21,7 @@ Description: Holds a comma separated list of device unique_ids that If a device is authorized automatically during boot its boot attribute is set to 1. -What: /sys/bus/thunderbolt/devices/.../domainX/deauthorization +What: /sys/bus/thunderbolt/devices/.../domainX/deauthorization Date: May 2021 KernelVersion: 5.12 Contact: Mika Westerberg @@ -30,7 +30,7 @@ Description: This attribute tells whether the system supports de-authorize PCIe tunnel by writing 0 to authorized attribute under each device. -What: /sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection +What: /sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection Date: Mar 2019 KernelVersion: 4.21 Contact: thunderbolt-software@lists.01.org @@ -39,7 +39,7 @@ Description: This attribute tells whether the system uses IOMMU it is not (DMA protection is solely based on Thunderbolt security levels). -What: /sys/bus/thunderbolt/devices/.../domainX/security +What: /sys/bus/thunderbolt/devices/.../domainX/security Date: Sep 2017 KernelVersion: 4.13 Contact: thunderbolt-software@lists.01.org @@ -61,7 +61,7 @@ Description: This attribute holds current Thunderbolt security level the BIOS. ======= ================================================== -What: /sys/bus/thunderbolt/devices/.../authorized +What: /sys/bus/thunderbolt/devices/.../authorized Date: Sep 2017 KernelVersion: 4.13 Contact: thunderbolt-software@lists.01.org @@ -95,14 +95,14 @@ Description: This attribute is used to authorize Thunderbolt devices EKEYREJECTED if the challenge response did not match. == ======================================================== -What: /sys/bus/thunderbolt/devices/.../boot +What: /sys/bus/thunderbolt/devices/.../boot Date: Jun 2018 KernelVersion: 4.17 Contact: thunderbolt-software@lists.01.org Description: This attribute contains 1 if Thunderbolt device was already authorized on boot and 0 otherwise. -What: /sys/bus/thunderbolt/devices/.../generation +What: /sys/bus/thunderbolt/devices/.../generation Date: Jan 2020 KernelVersion: 5.5 Contact: Christian Kellner @@ -110,7 +110,7 @@ Description: This attribute contains the generation of the Thunderbolt controller associated with the device. It will contain 4 for USB4. -What: /sys/bus/thunderbolt/devices/.../key +What: /sys/bus/thunderbolt/devices/.../key Date: Sep 2017 KernelVersion: 4.13 Contact: thunderbolt-software@lists.01.org @@ -226,6 +226,20 @@ Description: When new NVM image is written to the non-active NVM based mailbox before the device is power cycled. Writing 0 here clears the status. +What: /sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect +Date: Oct 2020 +KernelVersion: v5.9 +Contact: Mario Limonciello +Description: For supported devices, automatically authenticate the new Thunderbolt + image when the device is disconnected from the host system. + + This file will accept writing values "1" or "2" + + - Writing "1" will flush the image to the storage + area and prepare the device for authentication on disconnect. + - Writing "2" will run some basic validation on the image + and flush it to the storage area. + What: /sys/bus/thunderbolt/devices/./key Date: Jan 2018 KernelVersion: 4.15 @@ -308,17 +322,3 @@ Date: Oct 2020 KernelVersion: v5.9 Contact: Mika Westerberg Description: Retimer vendor identifier read from the hardware. - -What: /sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect -Date: Oct 2020 -KernelVersion: v5.9 -Contact: Mario Limonciello -Description: For supported devices, automatically authenticate the new Thunderbolt - image when the device is disconnected from the host system. - - This file will accept writing values "1" or "2" - - - Writing "1" will flush the image to the storage - area and prepare the device for authentication on disconnect. - - Writing "2" will run some basic validation on the image - and flush it to the storage area.