From: Linus Torvalds Date: Fri, 3 Sep 2021 18:03:00 +0000 (-0700) Subject: Merge tag 'for-linus' of git://github.com/openrisc/linux X-Git-Tag: microblaze-v5.16~104 X-Git-Url: http://git.monstr.eu/?p=linux-2.6-microblaze.git;a=commitdiff_plain;h=603eefda5fcf8f9dab3ae253e677abb285f6f3bc;hp=50ddcdb2635c82e195a2557341d759c5b9419bf1 Merge tag 'for-linus' of git://github.com/openrisc/linux Pull OpenRISC updates from Stafford Horne: "A few cleanups and compiler warning fixes for OpenRISC. Also, this includes dts and defconfig updates to enable Ethernet on OpenRISC/Litex FPGA SoC's now that the LiteEth driver has gone upstream" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc/litex: Update defconfig openrisc/litex: Add ethernet device openrisc/litex: Update uart address openrisc: Fix compiler warnings in setup openrisc: rename or32 code & comments to or1k openrisc: don't printk() unconditionally --- diff --git a/arch/openrisc/boot/dts/or1klitex.dts b/arch/openrisc/boot/dts/or1klitex.dts index 3f9867aa3844..91c7173c50e6 100644 --- a/arch/openrisc/boot/dts/or1klitex.dts +++ b/arch/openrisc/boot/dts/or1klitex.dts @@ -41,10 +41,10 @@ interrupt-controller; }; - serial0: serial@e0002000 { + serial0: serial@e0006800 { device_type = "serial"; compatible = "litex,liteuart"; - reg = <0xe0002000 0x100>; + reg = <0xe0006800 0x100>; }; soc_ctrl0: soc_controller@e0000000 { @@ -52,4 +52,13 @@ reg = <0xe0000000 0xc>; status = "okay"; }; + + ethernet@e0001000 { + compatible = "litex,liteeth"; + reg = <0xe0001000 0x7c>, + <0xe0001800 0x0a>, + <0x80000000 0x2000>; + reg-names = "mac", "mdio", "buffer"; + interrupts = <2>; + }; }; diff --git a/arch/openrisc/configs/or1klitex_defconfig b/arch/openrisc/configs/or1klitex_defconfig index 3c2c70d3d740..d695879a4d26 100644 --- a/arch/openrisc/configs/or1klitex_defconfig +++ b/arch/openrisc/configs/or1klitex_defconfig @@ -1,18 +1,24 @@ CONFIG_BLK_DEV_INITRD=y -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y -CONFIG_BUG_ON_DATA_CORRUPTION=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y CONFIG_EMBEDDED=y +CONFIG_OPENRISC_BUILTIN_DTB="or1klitex" CONFIG_HZ_100=y -CONFIG_INITRAMFS_SOURCE="openrisc-rootfs.cpio.gz" +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_OF_OVERLAY=y -CONFIG_OPENRISC_BUILTIN_DTB="or1klitex" -CONFIG_PANIC_ON_OOPS=y -CONFIG_PRINTK_TIME=y -CONFIG_LITEX_SOC_CONTROLLER=y +CONFIG_NETDEVICES=y +CONFIG_LITEX_LITEETH=y CONFIG_SERIAL_LITEUART=y CONFIG_SERIAL_LITEUART_CONSOLE=y -CONFIG_SOFTLOCKUP_DETECTOR=y CONFIG_TTY_PRINTK=y +CONFIG_LITEX_SOC_CONTROLLER=y +CONFIG_TMPFS=y +CONFIG_PRINTK_TIME=y +CONFIG_PANIC_ON_OOPS=y +CONFIG_SOFTLOCKUP_DETECTOR=y +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y +CONFIG_BUG_ON_DATA_CORRUPTION=y diff --git a/arch/openrisc/include/asm/pgtable.h b/arch/openrisc/include/asm/pgtable.h index 4ac591c9ca33..cdd657f80bfa 100644 --- a/arch/openrisc/include/asm/pgtable.h +++ b/arch/openrisc/include/asm/pgtable.h @@ -12,7 +12,7 @@ * et al. */ -/* or32 pgtable.h - macros and functions to manipulate page tables +/* or1k pgtable.h - macros and functions to manipulate page tables * * Based on: * include/asm-cris/pgtable.h @@ -29,14 +29,14 @@ /* * The Linux memory management assumes a three-level page table setup. On - * or32, we use that, but "fold" the mid level into the top-level page + * or1k, we use that, but "fold" the mid level into the top-level page * table. Since the MMU TLB is software loaded through an interrupt, it * supports any page table structure, so we could have used a three-level * setup, but for the amounts of memory we normally use, a two-level is * probably more efficient. * * This file contains the functions and defines necessary to modify and use - * the or32 page table tree. + * the or1k page table tree. */ extern void paging_init(void); diff --git a/arch/openrisc/include/asm/setup.h b/arch/openrisc/include/asm/setup.h new file mode 100644 index 000000000000..9acbc5deda69 --- /dev/null +++ b/arch/openrisc/include/asm/setup.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2021 Stafford Horne + */ +#ifndef _ASM_OR1K_SETUP_H +#define _ASM_OR1K_SETUP_H + +#include +#include + +#ifndef __ASSEMBLY__ +void __init or1k_early_setup(void *fdt); +#endif + +#endif /* _ASM_OR1K_SETUP_H */ diff --git a/arch/openrisc/include/asm/thread_info.h b/arch/openrisc/include/asm/thread_info.h index 4f9d2a261455..659834ab87fa 100644 --- a/arch/openrisc/include/asm/thread_info.h +++ b/arch/openrisc/include/asm/thread_info.h @@ -25,7 +25,7 @@ /* THREAD_SIZE is the size of the task_struct/kernel_stack combo. * normally, the stack is found by doing something like p + THREAD_SIZE - * in or32, a page is 8192 bytes, which seems like a sane size + * in or1k, a page is 8192 bytes, which seems like a sane size */ #define THREAD_SIZE_ORDER 0 diff --git a/arch/openrisc/kernel/entry.S b/arch/openrisc/kernel/entry.S index 947613f61d4a..edaa775a648e 100644 --- a/arch/openrisc/kernel/entry.S +++ b/arch/openrisc/kernel/entry.S @@ -326,7 +326,7 @@ EXCEPTION_ENTRY(_data_page_fault_handler) 1: l.ori r6,r0,0x0 // !write access 2: - /* call fault.c handler in or32/mm/fault.c */ + /* call fault.c handler in openrisc/mm/fault.c */ l.jal do_page_fault l.nop l.j _ret_from_exception @@ -348,7 +348,7 @@ EXCEPTION_ENTRY(_insn_page_fault_handler) /* r4 set be EXCEPTION_HANDLE */ // effective address of fault l.ori r6,r0,0x0 // !write access - /* call fault.c handler in or32/mm/fault.c */ + /* call fault.c handler in openrisc/mm/fault.c */ l.jal do_page_fault l.nop l.j _ret_from_exception @@ -547,6 +547,7 @@ EXCEPTION_ENTRY(_external_irq_handler) l.bnf 1f // ext irq enabled, all ok. l.nop +#ifdef CONFIG_PRINTK l.addi r1,r1,-0x8 l.movhi r3,hi(42f) l.ori r3,r3,lo(42f) @@ -560,6 +561,7 @@ EXCEPTION_ENTRY(_external_irq_handler) .string "\n\rESR interrupt bug: in _external_irq_handler (ESR %x)\n\r" .align 4 .previous +#endif l.ori r4,r4,SPR_SR_IEE // fix the bug // l.sw PT_SR(r1),r4 diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S index af355e3f4619..15f1b38dfe03 100644 --- a/arch/openrisc/kernel/head.S +++ b/arch/openrisc/kernel/head.S @@ -599,7 +599,7 @@ flush_tlb: l.jal _flush_tlb l.nop -/* The MMU needs to be enabled before or32_early_setup is called */ +/* The MMU needs to be enabled before or1k_early_setup is called */ enable_mmu: /* @@ -641,9 +641,9 @@ enable_mmu: /* magic number mismatch, set fdt pointer to null */ l.or r25,r0,r0 _fdt_found: - /* pass fdt pointer to or32_early_setup in r3 */ + /* pass fdt pointer to or1k_early_setup in r3 */ l.or r3,r0,r25 - LOAD_SYMBOL_2_GPR(r24, or32_early_setup) + LOAD_SYMBOL_2_GPR(r24, or1k_early_setup) l.jalr r24 l.nop diff --git a/arch/openrisc/kernel/setup.c b/arch/openrisc/kernel/setup.c index 8ae2da6ac097..0cd04d936a7a 100644 --- a/arch/openrisc/kernel/setup.c +++ b/arch/openrisc/kernel/setup.c @@ -209,7 +209,8 @@ void __init setup_cpuinfo(void) } /** - * or32_early_setup + * or1k_early_setup + * @fdt: pointer to the start of the device tree in memory or NULL * * Handles the pointer to the device tree that this kernel is to use * for establishing the available platform devices. @@ -217,7 +218,7 @@ void __init setup_cpuinfo(void) * Falls back on built-in device tree in case null pointer is passed. */ -void __init or32_early_setup(void *fdt) +void __init or1k_early_setup(void *fdt) { if (fdt) pr_info("FDT at %p\n", fdt); @@ -243,21 +244,6 @@ static inline unsigned long extract_value(unsigned long reg, unsigned long mask) return mask & reg; } -void __init detect_unit_config(unsigned long upr, unsigned long mask, - char *text, void (*func) (void)) -{ - if (text != NULL) - printk("%s", text); - - if (upr & mask) { - if (func != NULL) - func(); - else - printk("present\n"); - } else - printk("not present\n"); -} - /* * calibrate_delay * diff --git a/arch/openrisc/lib/Makefile b/arch/openrisc/lib/Makefile index 79775aaa6baa..53327406b483 100644 --- a/arch/openrisc/lib/Makefile +++ b/arch/openrisc/lib/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only # -# Makefile for or32 specific library files.. +# Makefile for or1k specific library files.. # obj-y := delay.o string.o memset.o memcpy.o diff --git a/arch/openrisc/mm/fault.c b/arch/openrisc/mm/fault.c index ca97d9baab51..c730d1a51686 100644 --- a/arch/openrisc/mm/fault.c +++ b/arch/openrisc/mm/fault.c @@ -28,7 +28,7 @@ unsigned long pte_misses; /* updated by do_page_fault() */ unsigned long pte_errors; /* updated by do_page_fault() */ /* __PHX__ :: - check the vmalloc_fault in do_page_fault() - * - also look into include/asm-or32/mmu_context.h + * - also look into include/asm/mmu_context.h */ volatile pgd_t *current_pgd[NR_CPUS];