+++ /dev/null
-/*
- * Handle mapping of the flash memory access routines
- * on TQM8xxL based devices.
- *
- * based on rpxlite.c
- *
- * Copyright(C) 2001 Kirk Lee <kirk@hpc.ee.ntu.edu.tw>
- *
- * This code is GPLed
- *
- */
-
-/*
- * According to TQM8xxL hardware manual, TQM8xxL series have
- * following flash memory organisations:
- * | capacity | | chip type | | bank0 | | bank1 |
- * 2MiB 512Kx16 2MiB 0
- * 4MiB 1Mx16 4MiB 0
- * 8MiB 1Mx16 4MiB 4MiB
- * Thus, we choose CONFIG_MTD_CFI_I2 & CONFIG_MTD_CFI_B4 at
- * kernel configuration.
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-
-#define FLASH_ADDR 0x40000000
-#define FLASH_SIZE 0x00800000
-#define FLASH_BANK_MAX 4
-
-// trivial struct to describe partition information
-struct mtd_part_def
-{
- int nums;
- unsigned char *type;
- struct mtd_partition* mtd_part;
-};
-
-//static struct mtd_info *mymtd;
-static struct mtd_info* mtd_banks[FLASH_BANK_MAX];
-static struct map_info* map_banks[FLASH_BANK_MAX];
-static struct mtd_part_def part_banks[FLASH_BANK_MAX];
-static unsigned long num_banks;
-static void __iomem *start_scan_addr;
-
-/*
- * Here are partition information for all known TQM8xxL series devices.
- * See include/linux/mtd/partitions.h for definition of the mtd_partition
- * structure.
- *
- * The *_max_flash_size is the maximum possible mapped flash size which
- * is not necessarily the actual flash size. It must correspond to the
- * value specified in the mapping definition defined by the
- * "struct map_desc *_io_desc" for the corresponding machine.
- */
-
-/* Currently, TQM8xxL has up to 8MiB flash */
-static unsigned long tqm8xxl_max_flash_size = 0x00800000;
-
-/* partition definition for first flash bank
- * (cf. "drivers/char/flash_config.c")
- */
-static struct mtd_partition tqm8xxl_partitions[] = {
- {
- .name = "ppcboot",
- .offset = 0x00000000,
- .size = 0x00020000, /* 128KB */
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "kernel", /* default kernel image */
- .offset = 0x00020000,
- .size = 0x000e0000,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "user",
- .offset = 0x00100000,
- .size = 0x00100000,
- },
- {
- .name = "initrd",
- .offset = 0x00200000,
- .size = 0x00200000,
- }
-};
-/* partition definition for second flash bank */
-static struct mtd_partition tqm8xxl_fs_partitions[] = {
- {
- .name = "cramfs",
- .offset = 0x00000000,
- .size = 0x00200000,
- },
- {
- .name = "jffs",
- .offset = 0x00200000,
- .size = 0x00200000,
- //.size = MTDPART_SIZ_FULL,
- }
-};
-
-static int __init init_tqm_mtd(void)
-{
- int idx = 0, ret = 0;
- unsigned long flash_addr, flash_size, mtd_size = 0;
- /* pointer to TQM8xxL board info data */
- bd_t *bd = (bd_t *)__res;
-
- flash_addr = bd->bi_flashstart;
- flash_size = bd->bi_flashsize;
-
- //request maximum flash size address space
- start_scan_addr = ioremap(flash_addr, flash_size);
- if (!start_scan_addr) {
- printk(KERN_WARNING "%s:Failed to ioremap address:0x%x\n", __func__, flash_addr);
- return -EIO;
- }
-
- for (idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
- if(mtd_size >= flash_size)
- break;
-
- printk(KERN_INFO "%s: chip probing count %d\n", __func__, idx);
-
- map_banks[idx] = kzalloc(sizeof(struct map_info), GFP_KERNEL);
- if(map_banks[idx] == NULL) {
- ret = -ENOMEM;
- /* FIXME: What if some MTD devices were probed already? */
- goto error_mem;
- }
-
- map_banks[idx]->name = kmalloc(16, GFP_KERNEL);
-
- if (!map_banks[idx]->name) {
- ret = -ENOMEM;
- /* FIXME: What if some MTD devices were probed already? */
- goto error_mem;
- }
- sprintf(map_banks[idx]->name, "TQM8xxL%d", idx);
-
- map_banks[idx]->size = flash_size;
- map_banks[idx]->bankwidth = 4;
-
- simple_map_init(map_banks[idx]);
-
- map_banks[idx]->virt = start_scan_addr;
- map_banks[idx]->phys = flash_addr;
- /* FIXME: This looks utterly bogus, but I'm trying to
- preserve the behaviour of the original (shown here)...
-
- map_banks[idx]->map_priv_1 =
- start_scan_addr + ((idx > 0) ?
- (mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0);
- */
-
- if (idx && mtd_banks[idx-1]) {
- map_banks[idx]->virt += mtd_banks[idx-1]->size;
- map_banks[idx]->phys += mtd_banks[idx-1]->size;
- }
-
- //start to probe flash chips
- mtd_banks[idx] = do_map_probe("cfi_probe", map_banks[idx]);
-
- if (mtd_banks[idx]) {
- mtd_banks[idx]->owner = THIS_MODULE;
- mtd_size += mtd_banks[idx]->size;
- num_banks++;
-
- printk(KERN_INFO "%s: bank%d, name:%s, size:%dbytes \n", __func__, num_banks,
- mtd_banks[idx]->name, mtd_banks[idx]->size);
- }
- }
-
- /* no supported flash chips found */
- if (!num_banks) {
- printk(KERN_NOTICE "TQM8xxL: No support flash chips found!\n");
- ret = -ENXIO;
- goto error_mem;
- }
-
- /*
- * Select Static partition definitions
- */
- part_banks[0].mtd_part = tqm8xxl_partitions;
- part_banks[0].type = "Static image";
- part_banks[0].nums = ARRAY_SIZE(tqm8xxl_partitions);
-
- part_banks[1].mtd_part = tqm8xxl_fs_partitions;
- part_banks[1].type = "Static file system";
- part_banks[1].nums = ARRAY_SIZE(tqm8xxl_fs_partitions);
-
- for(idx = 0; idx < num_banks ; idx++) {
- if (part_banks[idx].nums == 0)
- printk(KERN_NOTICE "TQM flash%d: no partition info available, registering whole flash at once\n", idx);
- else
- printk(KERN_NOTICE "TQM flash%d: Using %s partition definition\n",
- idx, part_banks[idx].type);
- mtd_device_register(mtd_banks[idx], part_banks[idx].mtd_part,
- part_banks[idx].nums);
- }
- return 0;
-error_mem:
- for(idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
- if(map_banks[idx] != NULL) {
- kfree(map_banks[idx]->name);
- map_banks[idx]->name = NULL;
- kfree(map_banks[idx]);
- map_banks[idx] = NULL;
- }
- }
-error:
- iounmap(start_scan_addr);
- return ret;
-}
-
-static void __exit cleanup_tqm_mtd(void)
-{
- unsigned int idx = 0;
- for(idx = 0 ; idx < num_banks ; idx++) {
- /* destroy mtd_info previously allocated */
- if (mtd_banks[idx]) {
- mtd_device_unregister(mtd_banks[idx]);
- map_destroy(mtd_banks[idx]);
- }
- /* release map_info not used anymore */
- kfree(map_banks[idx]->name);
- kfree(map_banks[idx]);
- }
-
- if (start_scan_addr) {
- iounmap(start_scan_addr);
- start_scan_addr = 0;
- }
-}
-
-module_init(init_tqm_mtd);
-module_exit(cleanup_tqm_mtd);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Kirk Lee <kirk@hpc.ee.ntu.edu.tw>");
-MODULE_DESCRIPTION("MTD map driver for TQM8xxL boards");
projects / linux-2.6-microblaze.git / commitdiff