ARC: mm: Use max_high_pfn as a HIGHMEM zone border

Commit 4af22ded0ecf ("arc: fix memory initialization for systems
with two memory banks") fixed highmem, but for the PAE case it causes
bug messages:

| BUG: Bad page state in process swapper  pfn:80000
| page:(ptrval) refcount:0 mapcount:1 mapping:00000000 index:0x0 pfn:0x80000 flags: 0x0()
| raw: 00000000 00000100 00000122 00000000 00000000 00000000 00000000 00000000
| raw: 00000000
| page dumped because: nonzero mapcount
| Modules linked in:
| CPU: 0 PID: 0 Comm: swapper Not tainted 5.12.0-rc5-00003-g1e43c377a79f #1

This is because the fix expects highmem to be always less than
lowmem and uses min_low_pfn as an upper zone border for highmem.

max_high_pfn should be ok for both highmem and highmem+PAE cases.

Fixes: 4af22ded0ecf ("arc: fix memory initialization for systems with two memory banks")
Signed-off-by: Vladimir Isaev <isaev@synopsys.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: stable@vger.kernel.org  #5.8 onwards
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index 33832e3..e2ed355 100644 (file)
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -157,7 +157,16 @@ void __init setup_arch_memory(void)
        min_high_pfn = PFN_DOWN(high_mem_start);
        max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
 
-       max_zone_pfn[ZONE_HIGHMEM] = min_low_pfn;
+       /*
+        * max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE.
+        * For HIGHMEM without PAE max_high_pfn should be less than
+        * min_low_pfn to guarantee that these two regions don't overlap.
+        * For PAE case highmem is greater than lowmem, so it is natural
+        * to use max_high_pfn.
+        *
+        * In both cases, holes should be handled by pfn_valid().
+        */
+       max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
 
        high_memory = (void *)(min_high_pfn << PAGE_SHIFT);