Merge tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23...

Merge tag 'iio-for-5.18a' of https://git./linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

First set of new device support, fixes, cleanups and features for IIO in 5.18

This cycle we had quite a few series that applied similar changes
to lots of drivers. To keep this description manageable I have
called those out in their own section rather than per driver.

Particularly pleased to see the long running AFE precision series
going in this cycle.

Series includes some late breaking fixes.

New device support
* adi,ada4250 amplifier
  - New driver and dt bindings for this programmable gain amplifier.
* adi,admv1014 microwave down-converter
  - New driver, dt bindings and some device specific ABI that
    may be generalized as more drivers for devices similar to this
    are added.
* adi,admv4420 K Band down-converter.
  - New driver and dt bindings.
* adi,adxl367 accelerometer driver.
  - New driver, dt-bindings + some new IIO ABI definitions to support
    reference magnitude events where an estimate of the acceleration
    due to gravity has been removed.
  - A few fixes as follow up patches.
* adi,ltc2688 DAC with toggle and dither modes.
  - New driver and bindings. Includes some new driver specific (for now)
    ABI for handling toggle mode and the addition of a dither waveform to
    the DAC output.
* AFE (analog front end) add support for additional types of analog device
  in front of an ADC.
  - RTD temperature sensors with dt bindings.
  - Temperature transducers wit dt bindings.
  - Related cleanup and features listed in other sections below.
* maxim,ds3502 potentiometer.
  - Add support to ds1803 driver which required significant rework.
* mediatek,mt2701-auxadc driver
  - Add mediatek,mt8186-auxadc - id table and chip specific info only.
* semtech,sx9324, semtech,ax9360
  - Substantial refactoring of sx9310 to extract core logic for reuse
    into a separate module
  - New driver using this supporting sx9324 proximity sensors.
  - New driver using this supporting sx9360 proximity sensors.
* silan,sc7a20
  - Compatible with the st,lis2dh (or nearly anyway) so add ID and
    chip specific info to enable support. Also silan vendor ID added
    for dt-bindings.

Staging graduation
* adi,ad7280a monitoring ADC for stacked lithium-ion batteries in
  electric cars and similar.
  - Substantial rework of driver required to bring inline with current
    IIO best practice. An unusual device in IIO so some interesting features
    we may see more of in future.

Multiple driver/core cleanup
- Use sysfs_emit() in simple locations where there is no path to change
  to various core created attributes.
- Trivial white space fixes around inconsistency between space after { and
  before } in id tables.
- Introduce new handling for fractional types to avoid repeated similar
  implementations. Use this in 3 drivers. Note this is also targeted
  at future use in the AFE driver and was motivated by discussions
  around the precision related work on that driver.
- of related header cleanups - drop of*.h and add mod_devicetable.h as
  appropriate.
- Move a number of symbol exports into IIO_* namespaces.  Two categories,
  1) Library used by multiple drivers e.g. st_sensors
  2) Core driver module exporting functions used by bus specific modules.
  A few related cleanups in this set.
- Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and
  similar to simplify drivers and take advantage of these new macros
  allowing the compiler to do the job or removing unused code without
  the need for __maybe_unused markings. Conversion of other drivers to
  these new macros ongoing.

Features
* adi,adf4350
  - Switch from of specific to generic device properties enabling use with
    other firmware types.
* adi,adx345
  - Switch from of specific to generic device properties.
  - Add ACPI ID ADS0345
  - Related driver cleanup.
* adi,hmc425a
  - Switch from of specific to generic device properties.
* afe analog rescaler driver
  - Wider range of types supported for scale.
  - Support offset.
  - Kunit tests.
* atlas,ezo-sensor
  - Convert from of to device properties.
* fsl,mma8452
  - Support mount matrix.
* infineon,dps310:
  - Add ACPI ID IFX3100.
* invensense,mpu6050
  - Convert to generic device properties.
* maxim,ds1803
  - Add out_raw_available before supporting more devices.
  - Convert from of specific to device properties.
* samsung,ssp_sensors
  - Convert from of specific to device properties.
* st,stm32-timer trigger
  - Convert from of specific to device properties.
* ti,hdc101x
  - Add ACPI ID TXNW1010.
* ti,tsc2046:
  - Add read_raw support to enable use of iio_hwmon and similar.

Fixes / cleanup.
* mailmap
  - Update for Cai Huoqing
* MAINTAINERS
  - Fix Analog Devices related links.
  - Add entry for ADRF6780
  - Add entry for ADMV1013
  - Add entry for AD7293
  - Add entry for ADMV8818
  - Update files listed for adis-lib
* iio core:
  - Fix wrong comment about current_mode being something a driver should
    ever access.
  - Use struct_size() rather than open coding in industrialio-hw-consumer
* adi,axl355
  - Use units.h definitions instead of local versions.
* adi,adis-lib
  - Simplify *updated_bits() macro
  - Whitespace cleanup.
* afe - Note many of these fixes only apply to particular configurations
  so the problems have probably not been seen in the wild, but will be
  visible with new usecases enabled this cycle.
  - Fix application of consumer scale for IIO_VAL_INT.
  - Apply a scale of 1 when no scale is provided.
  - Make best effort to establish a valid offset value for fractional
    cases.
  - Use s64 for scale calculations where parameters may be signed.
  - Tidy up include order.
  - Improve accuracy for small fractional sales
  - Reduce risk of integer overflow.
* ams,as3935
  - Use devm_delayed_work_autocancel() to replace open coded equivalent.
* aspeed,adc
  - Fix wrong use of divider flag.
* atmel,sama5d2-adc
  - Relax atmel,trigger-edge-type to optional.
  - Drop Ludovic Desroches from listed maintainers of the dt-binding
    inline with previous MAINTAINERS entry update.
* fsl,mma8452
  - Fix probing when i2c_device_id used.
  - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
    Use dev_to_iio_dev() instead. Note the original path in here
    worked more by luck than design.
* invensense,mpu6050
  - Drop ACPI_PTR() protection to avoid an unused warning.
  - Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to
    simplify handling.
* motorola,cpcap-adc
  - Drop unused assignment.
* qcom,spmi-adc
  - Fix wrong example of 'reg' in binding document.
* renesas,rzg2l-adc
  - Trivial typo fix.
* semtech,sx9360
  - Fix wrong register handling for event generation.
* st_sensors
  - Allow manual disabling of I2C or SPI module if not needed for a particular
    board. Default is still to enable the bus specific module if
    appropriate bus is supported.
* st,lsm6dsx
  - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev.
    Use dev_to_iio_dev() instead.
* ti,palmas-gpadc
  - Split the interrupt fields in the dt-binding example
* ti,tsc2046
  - Rework state machine to improve readability after recent debugging of
    an issue fixed elsewhere.
  - Add a sanity check to avoid very large memory allocations if a crazy
    delay is specified.
* ti,twl6030
  - Add error handling if devm_request_threaded_irq() fails.
* xilinx,ams
  - Use devm_delayed_work_autocancel() instead of open coding equivalent.
  - Fix missing required clock entry in dt-binding.
  - Fix miss counting of channels resulting in ps channels not
    being enabled.
  - Fix incorrect values written to sequencer registers.
  - Fix sequence for single channel reading.

* tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (245 commits)
  iio: adc: xilinx-ams: Fix single channel switching sequence
  iio: adc: xilinx-ams: Fixed wrong sequencer register settings
  iio: adc: xilinx-ams: Fixed missing PS channels
  dt-bindings: iio: adc: zynqmp_ams: Add clock entry
  iio: accel: mma8452: use the correct logic to get mma8452_data
  iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.
  iio: imu: st_lsm6dsx: use dev_to_iio_dev() to get iio_dev struct
  dt-bindings: iio: Add ltc2688 documentation
  iio: ABI: add ABI file for the LTC2688 DAC
  iio: dac: add support for ltc2688
  dt-bindings: iio: afe: add bindings for temperature transducers
  dt-bindings: iio: afe: add bindings for temperature-sense-rtd
  iio: afe: rescale: add temperature transducers
  iio: afe: rescale: add RTD temperature sensor support
  iio: test: add basic tests for the iio-rescale driver
  iio: afe: rescale: reduce risk of integer overflow
  iio: afe: rescale: fix accuracy for small fractional scales
  iio: afe: rescale: add offset support
  iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support
  iio: afe: rescale: expose scale processing function
  ...