Merge tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git...

Merge tag 'aspeed-5.14-devicetree' of git://git./linux/kernel/git/joel/bmc into arm/dt

ASPEED device tree updates for 5.14

 - IBM Rainier and Everest LED descriptions. These systems have a large
   number of LEDs attached via expanders.

 - Ampere Mt Jade updates, as OpenBMC bringup continues for this
   machine.

 - Updated 64MB flash layout for systems using OpenBMC on NOR root file
   systems.

 - Support for HS200 MMC on AST2600 EVB. This is only supported from A2,
   so a new device tree is added to support A0 and A1.

 - Update all command lines for early serial output.

* tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
  ARM: dts: aspeed: everest: Add pcie cable card indicator leds
  ARM: dts: aspeed: everest: Add vrm and other indicator leds
  ARM: dts: aspeed: everest: Add dimm indicator leds
  ARM: dts: aspeed: everest: Add pcie slot indicator leds
  ARM: dts: aspeed: everest: Add nvme and fan indicator leds
  ARM: dts: aspeed: everest: Add system level indicator leds
  ARM: dts: aspeed-g5: Add SCU phandle to GFX node
  ARM: dts: aspeed: Everest: Add directly controlled LEDs
  ARM: dts: aspeed: Rainier 4U: Remove fan updates
  ARM: dts: aspeed: Everest: Fix cable card PCA chips
  ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout
  ARM: dts: aspeed: mtjade: switch to 64MB flash layout
  ARM: dts: aspeed: mtjade: Add PSU support
  ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI
  ARM: dts: aspeed: Set earlycon boot argument
  ARM: dts: aspeed-g6: Add pinctrl settings
  ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0
  ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller.
  ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.

Link: https://lore.kernel.org/r/CACPK8XduV9F=piu1qh56g+YNOZOBYTW7b2Y=XVYafpYDwWmDYA@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>