X-Git-Url: http://git.monstr.eu/?p=linux-2.6-microblaze.git;a=blobdiff_plain;f=Documentation%2Fsound%2Falsa-configuration.rst;h=65f61695f5618b58c9620c5e748fa0dcf34db84b;hp=b36af65a08edffd6331c0330c780f57f5919798d;hb=d6742212c0c6ccee2351499db80acba71fa36052;hpb=60144b23c94216b4aca6fba90dca9349183f39e1

diff --git a/Documentation/sound/alsa-configuration.rst b/Documentation/sound/alsa-configuration.rst
index b36af65a08ed..65f61695f561 100644
--- a/Documentation/sound/alsa-configuration.rst
+++ b/Documentation/sound/alsa-configuration.rst
@@ -1059,6 +1059,12 @@ The model name ``generic`` is treated as a special case.  When this
 model is given, the driver uses the generic codec parser without
 "codec-patch".  It's sometimes good for testing and debugging.
 
+The model option can be used also for aliasing to another PCI or codec
+SSID.  When it's passed in the form of ``model=XXXX:YYYY`` where XXXX
+and YYYY are the sub-vendor and sub-device IDs in hex numbers,
+respectively, the driver will refer to that SSID as a reference to the
+quirk table.
+
 If the default configuration doesn't work and one of the above
 matches with your device, report it together with alsa-info.sh
 output (with ``--no-upload`` option) to kernel bugzilla or alsa-devel
@@ -2252,6 +2258,27 @@ delayed_register
     The driver prints a message like "Found post-registration device
     assignment: 1234abcd:04" for such a device, so that user can
     notice the need.
+quirk_flags
+    Contains the bit flags for various device specific workarounds.
+    Applied to the corresponding card index.
+
+        * bit 0: Skip reading sample rate for devices
+        * bit 1: Create Media Controller API entries
+        * bit 2: Allow alignment on audio sub-slot at transfer
+        * bit 3: Add length specifier to transfers
+        * bit 4: Start playback stream at first in implement feedback mode
+        * bit 5: Skip clock selector setup
+        * bit 6: Ignore errors from clock source search
+        * bit 7: Indicates ITF-USB DSD based DACs
+        * bit 8: Add a delay of 20ms at each control message handling
+        * bit 9: Add a delay of 1-2ms at each control message handling
+        * bit 10: Add a delay of 5-6ms at each control message handling
+        * bit 11: Add a delay of 50ms at each interface setup
+        * bit 12: Perform sample rate validations at probe
+        * bit 13: Disable runtime PM autosuspend
+        * bit 14: Ignore errors for mixer access
+        * bit 15: Support generic DSD raw U32_BE format
+        * bit 16: Set up the interface at first like UAC1
 
 This module supports multiple devices, autoprobe and hotplugging.
 
@@ -2261,11 +2288,14 @@ check.
 
 NB: ``ignore_ctl_error=1`` may help when you get an error at accessing
 the mixer element such as URB error -22.  This happens on some
-buggy USB device or the controller.
+buggy USB device or the controller.  This workaround corresponds to
+the ``quirk_flags`` bit 14, too.
 
-NB: quirk_alias option is provided only for testing / development.
+NB: ``quirk_alias`` option is provided only for testing / development.
 If you want to have a proper support, contact to upstream for
 adding the matching quirk in the driver code statically.
+Ditto for ``quirk_flags``.  If a device is known to require specific
+workarounds, please report to the upstream.
 
 Module snd-usb-caiaq
 --------------------