X-Git-Url: http://git.monstr.eu/?p=linux-2.6-microblaze.git;a=blobdiff_plain;f=Documentation%2Fdevicetree%2Fbindings%2Fnet%2Fnfc%2Fnxp-nci.txt;h=285a37c2f189514aa13bcc4342427cf7f108616d;hp=9e4dc510a40aa3662bcacb8a2e9c4e14f782a3cb;hb=71c5f03154ac1cb27423b984743ccc2f5d11d14d;hpb=efd3043790c6e92f0bbe1fe385db9b544131c59c

diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
index 9e4dc510a40a..285a37c2f189 100644
--- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
+++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
@@ -6,11 +6,11 @@ Required properties:
 - reg: address on the bus
 - interrupts: GPIO interrupt to which the chip is connected
 - enable-gpios: Output GPIO pin used for enabling/disabling the chip
-- firmware-gpios: Output GPIO pin used to enter firmware download mode
 
 Optional SoC Specific Properties:
 - pinctrl-names: Contains only one value - "default".
 - pintctrl-0: Specifies the pin control groups used for this controller.
+- firmware-gpios: Output GPIO pin used to enter firmware download mode
 
 Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2):