X-Git-Url: http://git.monstr.eu/?p=linux-2.6-microblaze.git;a=blobdiff_plain;f=Documentation%2Fadmin-guide%2Fkernel-parameters.txt;h=828d11441ebf5724af406dc308d3af7e83ab42e1;hp=56bd70ee82fa25e7f3c6c7427c016ccb07fa1851;hb=d6742212c0c6ccee2351499db80acba71fa36052;hpb=9c849ce86e0fa93a218614eac562ace44053d7ce

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 56bd70ee82fa..828d11441ebf 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -287,13 +287,21 @@
 			do not want to use tracing_snapshot_alloc() as it needs
 			to be done where GFP_KERNEL allocations are allowed.
 
+	allow_mismatched_32bit_el0 [ARM64]
+			Allow execve() of 32-bit applications and setting of the
+			PER_LINUX32 personality on systems where only a strict
+			subset of the CPUs support 32-bit EL0. When this
+			parameter is present, the set of CPUs supporting 32-bit
+			EL0 is indicated by /sys/devices/system/cpu/aarch32_el0
+			and hot-unplug operations may be restricted.
+
+			See Documentation/arm64/asymmetric-32bit.rst for more
+			information.
+
 	amd_iommu=	[HW,X86-64]
 			Pass parameters to the AMD IOMMU driver in the system.
 			Possible values are:
-			fullflush - enable flushing of IO/TLB entries when
-				    they are unmapped. Otherwise they are
-				    flushed before they will be reused, which
-				    is a lot of faster
+			fullflush - Deprecated, equivalent to iommu.strict=1
 			off	  - do not initialize any AMD IOMMU found in
 				    the system
 			force_isolation - Force device isolation for all
@@ -380,6 +388,9 @@
 	arm64.nopauth	[ARM64] Unconditionally disable Pointer Authentication
 			support
 
+	arm64.nomte	[ARM64] Unconditionally disable Memory Tagging Extension
+			support
+
 	ataflop=	[HW,M68k]
 
 	atarimouse=	[HW,MOUSE] Atari Mouse
@@ -1944,18 +1955,17 @@
 			this case, gfx device will use physical address for
 			DMA.
 		strict [Default Off]
-			With this option on every unmap_single operation will
-			result in a hardware IOTLB flush operation as opposed
-			to batching them for performance.
+			Deprecated, equivalent to iommu.strict=1.
 		sp_off [Default Off]
 			By default, super page will be supported if Intel IOMMU
 			has the capability. With this option, super page will
 			not be supported.
-		sm_on [Default Off]
-			By default, scalable mode will be disabled even if the
-			hardware advertises that it has support for the scalable
-			mode translation. With this option set, scalable mode
-			will be used on hardware which claims to support it.
+		sm_on
+			Enable the Intel IOMMU scalable mode if the hardware
+			advertises that it has support for the scalable mode
+			translation.
+		sm_off
+			Disallow use of the Intel IOMMU scalable mode.
 		tboot_noforce [Default Off]
 			Do not force the Intel IOMMU enabled under tboot.
 			By default, tboot will force Intel IOMMU on, which
@@ -2047,13 +2057,12 @@
 			  throughput at the cost of reduced device isolation.
 			  Will fall back to strict mode if not supported by
 			  the relevant IOMMU driver.
-			1 - Strict mode (default).
+			1 - Strict mode.
 			  DMA unmap operations invalidate IOMMU hardware TLBs
 			  synchronously.
-			Note: on x86, the default behaviour depends on the
-			equivalent driver-specific parameters, but a strict
-			mode explicitly specified by either method takes
-			precedence.
+			unset - Use value of CONFIG_IOMMU_DEFAULT_DMA_{LAZY,STRICT}.
+			Note: on x86, strict mode specified via one of the
+			legacy driver-specific options takes precedence.
 
 	iommu.passthrough=
 			[ARM64, X86] Configure DMA to bypass the IOMMU by default.
@@ -4184,6 +4193,15 @@
 			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
 			default: disabled
 
+	printk.console_no_auto_verbose=
+			Disable console loglevel raise on oops, panic
+			or lockdep-detected issues (only if lock debug is on).
+			With an exception to setups with low baudrate on
+			serial console, keeping this 0 is a good choice
+			in order to provide more debug information.
+			Format: <bool>
+			default: 0 (auto_verbose is enabled)
+
 	printk.devkmsg={on,off,ratelimit}
 			Control writing to /dev/kmsg.
 			on - unlimited logging to /dev/kmsg from userspace
@@ -4962,8 +4980,6 @@
 	sa1100ir	[NET]
 			See drivers/net/irda/sa1100_ir.c.
 
-	sbni=		[NET] Granch SBNI12 leased line adapter
-
 	sched_verbose	[KNL] Enables verbose scheduler debug messages.
 
 	schedstats=	[KNL,X86] Enable or disable scheduled statistics.