* For printing you can use %DRM_MODE_FMT and DRM_MODE_ARG().
*/
struct drm_display_mode {
- /**
- * @head:
- *
- * struct list_head for mode lists.
- */
- struct list_head head;
-
- /**
- * @name:
- *
- * Human-readable name of the mode, filled out with drm_mode_set_name().
- */
- char name[DRM_DISPLAY_MODE_LEN];
-
- /**
- * @status:
- *
- * Status of the mode, used to filter out modes not supported by the
- * hardware. See enum &drm_mode_status.
- */
- enum drm_mode_status status;
-
- /**
- * @type:
- *
- * A bitmask of flags, mostly about the source of a mode. Possible flags
- * are:
- *
- * - DRM_MODE_TYPE_PREFERRED: Preferred mode, usually the native
- * resolution of an LCD panel. There should only be one preferred
- * mode per connector at any given time.
- * - DRM_MODE_TYPE_DRIVER: Mode created by the driver, which is all of
- * them really. Drivers must set this bit for all modes they create
- * and expose to userspace.
- * - DRM_MODE_TYPE_USERDEF: Mode defined via kernel command line
- *
- * Plus a big list of flags which shouldn't be used at all, but are
- * still around since these flags are also used in the userspace ABI.
- * We no longer accept modes with these types though:
- *
- * - DRM_MODE_TYPE_BUILTIN: Meant for hard-coded modes, unused.
- * Use DRM_MODE_TYPE_DRIVER instead.
- * - DRM_MODE_TYPE_DEFAULT: Again a leftover, use
- * DRM_MODE_TYPE_PREFERRED instead.
- * - DRM_MODE_TYPE_CLOCK_C and DRM_MODE_TYPE_CRTC_C: Define leftovers
- * which are stuck around for hysterical raisins only. No one has an
- * idea what they were meant for. Don't use.
- */
- unsigned int type;
-
/**
* @clock:
*
* Pixel clock in kHz.
*/
int clock; /* in kHz */
- int hdisplay;
- int hsync_start;
- int hsync_end;
- int htotal;
- int hskew;
- int vdisplay;
- int vsync_start;
- int vsync_end;
- int vtotal;
- int vscan;
+ u16 hdisplay;
+ u16 hsync_start;
+ u16 hsync_end;
+ u16 htotal;
+ u16 hskew;
+ u16 vdisplay;
+ u16 vsync_start;
+ u16 vsync_end;
+ u16 vtotal;
+ u16 vscan;
/**
* @flags:
*
* - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF: frame split into left and
* right parts.
*/
- unsigned int flags;
+ u32 flags;
+
+ /**
+ * @crtc_clock:
+ *
+ * Actual pixel or dot clock in the hardware. This differs from the
+ * logical @clock when e.g. using interlacing, double-clocking, stereo
+ * modes or other fancy stuff that changes the timings and signals
+ * actually sent over the wire.
+ *
+ * This is again in kHz.
+ *
+ * Note that with digital outputs like HDMI or DP there's usually a
+ * massive confusion between the dot clock and the signal clock at the
+ * bit encoding level. Especially when a 8b/10b encoding is used and the
+ * difference is exactly a factor of 10.
+ */
+ int crtc_clock;
+ u16 crtc_hdisplay;
+ u16 crtc_hblank_start;
+ u16 crtc_hblank_end;
+ u16 crtc_hsync_start;
+ u16 crtc_hsync_end;
+ u16 crtc_htotal;
+ u16 crtc_hskew;
+ u16 crtc_vdisplay;
+ u16 crtc_vblank_start;
+ u16 crtc_vblank_end;
+ u16 crtc_vsync_start;
+ u16 crtc_vsync_end;
+ u16 crtc_vtotal;
/**
* @width_mm:
* Addressable size of the output in mm, projectors should set this to
* 0.
*/
- int width_mm;
+ u16 width_mm;
/**
* @height_mm:
* Addressable size of the output in mm, projectors should set this to
* 0.
*/
- int height_mm;
+ u16 height_mm;
/**
- * @crtc_clock:
+ * @type:
*
- * Actual pixel or dot clock in the hardware. This differs from the
- * logical @clock when e.g. using interlacing, double-clocking, stereo
- * modes or other fancy stuff that changes the timings and signals
- * actually sent over the wire.
+ * A bitmask of flags, mostly about the source of a mode. Possible flags
+ * are:
*
- * This is again in kHz.
+ * - DRM_MODE_TYPE_PREFERRED: Preferred mode, usually the native
+ * resolution of an LCD panel. There should only be one preferred
+ * mode per connector at any given time.
+ * - DRM_MODE_TYPE_DRIVER: Mode created by the driver, which is all of
+ * them really. Drivers must set this bit for all modes they create
+ * and expose to userspace.
+ * - DRM_MODE_TYPE_USERDEF: Mode defined or selected via the kernel
+ * command line.
*
- * Note that with digital outputs like HDMI or DP there's usually a
- * massive confusion between the dot clock and the signal clock at the
- * bit encoding level. Especially when a 8b/10b encoding is used and the
- * difference is exactly a factor of 10.
+ * Plus a big list of flags which shouldn't be used at all, but are
+ * still around since these flags are also used in the userspace ABI.
+ * We no longer accept modes with these types though:
+ *
+ * - DRM_MODE_TYPE_BUILTIN: Meant for hard-coded modes, unused.
+ * Use DRM_MODE_TYPE_DRIVER instead.
+ * - DRM_MODE_TYPE_DEFAULT: Again a leftover, use
+ * DRM_MODE_TYPE_PREFERRED instead.
+ * - DRM_MODE_TYPE_CLOCK_C and DRM_MODE_TYPE_CRTC_C: Define leftovers
+ * which are stuck around for hysterical raisins only. No one has an
+ * idea what they were meant for. Don't use.
*/
- int crtc_clock;
- int crtc_hdisplay;
- int crtc_hblank_start;
- int crtc_hblank_end;
- int crtc_hsync_start;
- int crtc_hsync_end;
- int crtc_htotal;
- int crtc_hskew;
- int crtc_vdisplay;
- int crtc_vblank_start;
- int crtc_vblank_end;
- int crtc_vsync_start;
- int crtc_vsync_end;
- int crtc_vtotal;
+ u8 type;
/**
* @private_flags:
int private_flags;
/**
- * @vrefresh:
- *
- * Vertical refresh rate, for debug output in human readable form. Not
- * used in a functional way.
- *
- * This value is in Hz.
- */
- int vrefresh;
-
- /**
- * @picture_aspect_ratio:
+ * @head:
*
- * Field for setting the HDMI picture aspect ratio of a mode.
+ * struct list_head for mode lists.
*/
- enum hdmi_picture_aspect picture_aspect_ratio;
+ struct list_head head;
/**
* @export_head:
* avoid overhead of protecting it by mode_config.mutex.
*/
struct list_head export_head;
+
+ /**
+ * @name:
+ *
+ * Human-readable name of the mode, filled out with drm_mode_set_name().
+ */
+ char name[DRM_DISPLAY_MODE_LEN];
+
+ /**
+ * @status:
+ *
+ * Status of the mode, used to filter out modes not supported by the
+ * hardware. See enum &drm_mode_status.
+ */
+ enum drm_mode_status status;
+
+ /**
+ * @picture_aspect_ratio:
+ *
+ * Field for setting the HDMI picture aspect ratio of a mode.
+ */
+ enum hdmi_picture_aspect picture_aspect_ratio;
+
};
/**
* @m: display mode
*/
#define DRM_MODE_ARG(m) \
- (m)->name, (m)->vrefresh, (m)->clock, \
+ (m)->name, drm_mode_vrefresh(m), (m)->clock, \
(m)->hdisplay, (m)->hsync_start, (m)->hsync_end, (m)->htotal, \
(m)->vdisplay, (m)->vsync_start, (m)->vsync_end, (m)->vtotal, \
(m)->type, (m)->flags
projects / linux-2.6-microblaze.git / blobdiff