* @epc: the features supported by *this* EPC device will be returned
* @func_no: the features supported by the EPC device specific to the
* endpoint function with func_no will be returned
+ * @vfunc_no: the features supported by the EPC device specific to the
+ * virtual endpoint function with vfunc_no will be returned
*
* Invoke to get the features provided by the EPC which may be
* specific to an endpoint function. Returns pci_epc_features on success
* and NULL for any failures.
*/
const struct pci_epc_features *pci_epc_get_features(struct pci_epc *epc,
- u8 func_no)
+ u8 func_no, u8 vfunc_no)
{
const struct pci_epc_features *epc_features;
if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
return NULL;
+ if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+ return NULL;
+
if (!epc->ops->get_features)
return NULL;
mutex_lock(&epc->lock);
- epc_features = epc->ops->get_features(epc, func_no);
+ epc_features = epc->ops->get_features(epc, func_no, vfunc_no);
mutex_unlock(&epc->lock);
return epc_features;
/**
* pci_epc_raise_irq() - interrupt the host system
* @epc: the EPC device which has to interrupt the host
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
* @type: specify the type of interrupt; legacy, MSI or MSI-X
* @interrupt_num: the MSI or MSI-X interrupt number
*
* Invoke to raise an legacy, MSI or MSI-X interrupt
*/
-int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no,
+int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
enum pci_epc_irq_type type, u16 interrupt_num)
{
int ret;
if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
return -EINVAL;
+ if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+ return -EINVAL;
+
if (!epc->ops->raise_irq)
return 0;
mutex_lock(&epc->lock);
- ret = epc->ops->raise_irq(epc, func_no, type, interrupt_num);
+ ret = epc->ops->raise_irq(epc, func_no, vfunc_no, type, interrupt_num);
mutex_unlock(&epc->lock);
return ret;
* MSI data
* @epc: the EPC device which has the MSI capability
* @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
* @phys_addr: the physical address of the outbound region
* @interrupt_num: the MSI interrupt number
* @entry_size: Size of Outbound address region for each interrupt
* physical address (in outbound region) of the other interface to ring
* doorbell.
*/
-int pci_epc_map_msi_irq(struct pci_epc *epc, u8 func_no, phys_addr_t phys_addr,
- u8 interrupt_num, u32 entry_size, u32 *msi_data,
- u32 *msi_addr_offset)
+int pci_epc_map_msi_irq(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+ phys_addr_t phys_addr, u8 interrupt_num, u32 entry_size,
+ u32 *msi_data, u32 *msi_addr_offset)
{
int ret;
if (IS_ERR_OR_NULL(epc))
return -EINVAL;
+ if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+ return -EINVAL;
+
if (!epc->ops->map_msi_irq)
return -EINVAL;
mutex_lock(&epc->lock);
- ret = epc->ops->map_msi_irq(epc, func_no, phys_addr, interrupt_num,
- entry_size, msi_data, msi_addr_offset);
+ ret = epc->ops->map_msi_irq(epc, func_no, vfunc_no, phys_addr,
+ interrupt_num, entry_size, msi_data,
+ msi_addr_offset);
mutex_unlock(&epc->lock);
return ret;
/**
* pci_epc_get_msi() - get the number of MSI interrupt numbers allocated
* @epc: the EPC device to which MSI interrupts was requested
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
*
* Invoke to get the number of MSI interrupts allocated by the RC
*/
-int pci_epc_get_msi(struct pci_epc *epc, u8 func_no)
+int pci_epc_get_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
{
int interrupt;
if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
return 0;
+ if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+ return 0;
+
if (!epc->ops->get_msi)
return 0;
mutex_lock(&epc->lock);
- interrupt = epc->ops->get_msi(epc, func_no);
+ interrupt = epc->ops->get_msi(epc, func_no, vfunc_no);
mutex_unlock(&epc->lock);
if (interrupt < 0)
/**
* pci_epc_set_msi() - set the number of MSI interrupt numbers required
* @epc: the EPC device on which MSI has to be configured
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
* @interrupts: number of MSI interrupts required by the EPF
*
* Invoke to set the required number of MSI interrupts.
*/
-int pci_epc_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts)
+int pci_epc_set_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no, u8 interrupts)
{
int ret;
u8 encode_int;
interrupts > 32)
return -EINVAL;
+ if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+ return -EINVAL;
+
if (!epc->ops->set_msi)
return 0;
encode_int = order_base_2(interrupts);
mutex_lock(&epc->lock);
- ret = epc->ops->set_msi(epc, func_no, encode_int);
+ ret = epc->ops->set_msi(epc, func_no, vfunc_no, encode_int);
mutex_unlock(&epc->lock);
return ret;
/**
* pci_epc_get_msix() - get the number of MSI-X interrupt numbers allocated
* @epc: the EPC device to which MSI-X interrupts was requested
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
*
* Invoke to get the number of MSI-X interrupts allocated by the RC
*/
-int pci_epc_get_msix(struct pci_epc *epc, u8 func_no)
+int pci_epc_get_msix(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
{
int interrupt;
if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
return 0;
+ if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+ return 0;
+
if (!epc->ops->get_msix)
return 0;
mutex_lock(&epc->lock);
- interrupt = epc->ops->get_msix(epc, func_no);
+ interrupt = epc->ops->get_msix(epc, func_no, vfunc_no);
mutex_unlock(&epc->lock);
if (interrupt < 0)
/**
* pci_epc_set_msix() - set the number of MSI-X interrupt numbers required
* @epc: the EPC device on which MSI-X has to be configured
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
* @interrupts: number of MSI-X interrupts required by the EPF
* @bir: BAR where the MSI-X table resides
* @offset: Offset pointing to the start of MSI-X table
*
* Invoke to set the required number of MSI-X interrupts.
*/
-int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts,
- enum pci_barno bir, u32 offset)
+int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+ u16 interrupts, enum pci_barno bir, u32 offset)
{
int ret;
interrupts < 1 || interrupts > 2048)
return -EINVAL;
+ if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+ return -EINVAL;
+
if (!epc->ops->set_msix)
return 0;
mutex_lock(&epc->lock);
- ret = epc->ops->set_msix(epc, func_no, interrupts - 1, bir, offset);
+ ret = epc->ops->set_msix(epc, func_no, vfunc_no, interrupts - 1, bir,
+ offset);
mutex_unlock(&epc->lock);
return ret;
/**
* pci_epc_unmap_addr() - unmap CPU address from PCI address
* @epc: the EPC device on which address is allocated
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
* @phys_addr: physical address of the local system
*
* Invoke to unmap the CPU address from PCI address.
*/
-void pci_epc_unmap_addr(struct pci_epc *epc, u8 func_no,
+void pci_epc_unmap_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
phys_addr_t phys_addr)
{
if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
return;
+ if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+ return;
+
if (!epc->ops->unmap_addr)
return;
mutex_lock(&epc->lock);
- epc->ops->unmap_addr(epc, func_no, phys_addr);
+ epc->ops->unmap_addr(epc, func_no, vfunc_no, phys_addr);
mutex_unlock(&epc->lock);
}
EXPORT_SYMBOL_GPL(pci_epc_unmap_addr);
/**
* pci_epc_map_addr() - map CPU address to PCI address
* @epc: the EPC device on which address is allocated
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
* @phys_addr: physical address of the local system
* @pci_addr: PCI address to which the physical address should be mapped
* @size: the size of the allocation
*
* Invoke to map CPU address with PCI address.
*/
-int pci_epc_map_addr(struct pci_epc *epc, u8 func_no,
+int pci_epc_map_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
phys_addr_t phys_addr, u64 pci_addr, size_t size)
{
int ret;
if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
return -EINVAL;
+ if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+ return -EINVAL;
+
if (!epc->ops->map_addr)
return 0;
mutex_lock(&epc->lock);
- ret = epc->ops->map_addr(epc, func_no, phys_addr, pci_addr, size);
+ ret = epc->ops->map_addr(epc, func_no, vfunc_no, phys_addr, pci_addr,
+ size);
mutex_unlock(&epc->lock);
return ret;
/**
* pci_epc_clear_bar() - reset the BAR
* @epc: the EPC device for which the BAR has to be cleared
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
* @epf_bar: the struct epf_bar that contains the BAR information
*
* Invoke to reset the BAR of the endpoint device.
*/
-void pci_epc_clear_bar(struct pci_epc *epc, u8 func_no,
+void pci_epc_clear_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
struct pci_epf_bar *epf_bar)
{
if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions ||
epf_bar->flags & PCI_BASE_ADDRESS_MEM_TYPE_64))
return;
+ if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+ return;
+
if (!epc->ops->clear_bar)
return;
mutex_lock(&epc->lock);
- epc->ops->clear_bar(epc, func_no, epf_bar);
+ epc->ops->clear_bar(epc, func_no, vfunc_no, epf_bar);
mutex_unlock(&epc->lock);
}
EXPORT_SYMBOL_GPL(pci_epc_clear_bar);
/**
* pci_epc_set_bar() - configure BAR in order for host to assign PCI addr space
* @epc: the EPC device on which BAR has to be configured
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
* @epf_bar: the struct epf_bar that contains the BAR information
*
* Invoke to configure the BAR of the endpoint device.
*/
-int pci_epc_set_bar(struct pci_epc *epc, u8 func_no,
+int pci_epc_set_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
struct pci_epf_bar *epf_bar)
{
int ret;
!(flags & PCI_BASE_ADDRESS_MEM_TYPE_64)))
return -EINVAL;
+ if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+ return -EINVAL;
+
if (!epc->ops->set_bar)
return 0;
mutex_lock(&epc->lock);
- ret = epc->ops->set_bar(epc, func_no, epf_bar);
+ ret = epc->ops->set_bar(epc, func_no, vfunc_no, epf_bar);
mutex_unlock(&epc->lock);
return ret;
/**
* pci_epc_write_header() - write standard configuration header
* @epc: the EPC device to which the configuration header should be written
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
* @header: standard configuration header fields
*
* Invoke to write the configuration header to the endpoint controller. Every
* configuration header would be written. The callback function should write
* the header fields to this dedicated location.
*/
-int pci_epc_write_header(struct pci_epc *epc, u8 func_no,
+int pci_epc_write_header(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
struct pci_epf_header *header)
{
int ret;
if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
return -EINVAL;
+ if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+ return -EINVAL;
+
+ /* Only Virtual Function #1 has deviceID */
+ if (vfunc_no > 1)
+ return -EINVAL;
+
if (!epc->ops->write_header)
return 0;
mutex_lock(&epc->lock);
- ret = epc->ops->write_header(epc, func_no, header);
+ ret = epc->ops->write_header(epc, func_no, vfunc_no, header);
mutex_unlock(&epc->lock);
return ret;
u32 func_no;
int ret = 0;
- if (IS_ERR_OR_NULL(epc))
+ if (IS_ERR_OR_NULL(epc) || epf->is_vf)
return -EINVAL;
if (type == PRIMARY_INTERFACE && epf->epc)
projects / linux-2.6-microblaze.git / blobdiff