{
return pci_msi_prepare(domain, dev, nvec, info);
}
+
+/**
+ * hv_arch_irq_unmask() - "Unmask" the IRQ by setting its current
+ * affinity.
+ * @data: Describes the IRQ
+ *
+ * Build new a destination for the MSI and make a hypercall to
+ * update the Interrupt Redirection Table. "Device Logical ID"
+ * is built out of this PCI bus's instance GUID and the function
+ * number of the device.
+ */
+static void hv_arch_irq_unmask(struct irq_data *data)
+{
+ struct msi_desc *msi_desc = irq_data_get_msi_desc(data);
+ struct hv_retarget_device_interrupt *params;
+ struct hv_pcibus_device *hbus;
+ struct cpumask *dest;
+ cpumask_var_t tmp;
+ struct pci_bus *pbus;
+ struct pci_dev *pdev;
+ unsigned long flags;
+ u32 var_size = 0;
+ int cpu, nr_bank;
+ u64 res;
+
+ dest = irq_data_get_effective_affinity_mask(data);
+ pdev = msi_desc_to_pci_dev(msi_desc);
+ pbus = pdev->bus;
+ hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata);
+
+ spin_lock_irqsave(&hbus->retarget_msi_interrupt_lock, flags);
+
+ params = &hbus->retarget_msi_interrupt_params;
+ memset(params, 0, sizeof(*params));
+ params->partition_id = HV_PARTITION_ID_SELF;
+ params->int_entry.source = HV_INTERRUPT_SOURCE_MSI;
+ hv_set_msi_entry_from_desc(¶ms->int_entry.msi_entry, msi_desc);
+ params->device_id = (hbus->hdev->dev_instance.b[5] << 24) |
+ (hbus->hdev->dev_instance.b[4] << 16) |
+ (hbus->hdev->dev_instance.b[7] << 8) |
+ (hbus->hdev->dev_instance.b[6] & 0xf8) |
+ PCI_FUNC(pdev->devfn);
+ params->int_target.vector = hv_msi_get_int_vector(data);
+
+ /*
+ * Honoring apic->delivery_mode set to APIC_DELIVERY_MODE_FIXED by
+ * setting the HV_DEVICE_INTERRUPT_TARGET_MULTICAST flag results in a
+ * spurious interrupt storm. Not doing so does not seem to have a
+ * negative effect (yet?).
+ */
+
+ if (hbus->protocol_version >= PCI_PROTOCOL_VERSION_1_2) {
+ /*
+ * PCI_PROTOCOL_VERSION_1_2 supports the VP_SET version of the
+ * HVCALL_RETARGET_INTERRUPT hypercall, which also coincides
+ * with >64 VP support.
+ * ms_hyperv.hints & HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED
+ * is not sufficient for this hypercall.
+ */
+ params->int_target.flags |=
+ HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET;
+
+ if (!alloc_cpumask_var(&tmp, GFP_ATOMIC)) {
+ res = 1;
+ goto exit_unlock;
+ }
+
+ cpumask_and(tmp, dest, cpu_online_mask);
+ nr_bank = cpumask_to_vpset(¶ms->int_target.vp_set, tmp);
+ free_cpumask_var(tmp);
+
+ if (nr_bank <= 0) {
+ res = 1;
+ goto exit_unlock;
+ }
+
+ /*
+ * var-sized hypercall, var-size starts after vp_mask (thus
+ * vp_set.format does not count, but vp_set.valid_bank_mask
+ * does).
+ */
+ var_size = 1 + nr_bank;
+ } else {
+ for_each_cpu_and(cpu, dest, cpu_online_mask) {
+ params->int_target.vp_mask |=
+ (1ULL << hv_cpu_number_to_vp_number(cpu));
+ }
+ }
+
+ res = hv_do_hypercall(HVCALL_RETARGET_INTERRUPT | (var_size << 17),
+ params, NULL);
+
+exit_unlock:
+ spin_unlock_irqrestore(&hbus->retarget_msi_interrupt_lock, flags);
+
+ /*
+ * During hibernation, when a CPU is offlined, the kernel tries
+ * to move the interrupt to the remaining CPUs that haven't
+ * been offlined yet. In this case, the below hv_do_hypercall()
+ * always fails since the vmbus channel has been closed:
+ * refer to cpu_disable_common() -> fixup_irqs() ->
+ * irq_migrate_all_off_this_cpu() -> migrate_one_irq().
+ *
+ * Suppress the error message for hibernation because the failure
+ * during hibernation does not matter (at this time all the devices
+ * have been frozen). Note: the correct affinity info is still updated
+ * into the irqdata data structure in migrate_one_irq() ->
+ * irq_do_set_affinity() -> hv_set_affinity(), so later when the VM
+ * resumes, hv_pci_restore_msi_state() is able to correctly restore
+ * the interrupt with the correct affinity.
+ */
+ if (!hv_result_success(res) && hbus->state != hv_pcibus_removing)
+ dev_err(&hbus->hdev->device,
+ "%s() failed: %#llx", __func__, res);
+}
#elif defined(CONFIG_ARM64)
/*
* SPI vectors to use for vPCI; arch SPIs range is [32, 1019], but leaving a bit
return irqd->parent_data->hwirq;
}
-static void hv_set_msi_entry_from_desc(union hv_msi_entry *msi_entry,
- struct msi_desc *msi_desc)
-{
- msi_entry->address = ((u64)msi_desc->msg.address_hi << 32) |
- msi_desc->msg.address_lo;
- msi_entry->data = msi_desc->msg.data;
-}
-
/*
* @nr_bm_irqs: Indicates the number of IRQs that were allocated from
* the bitmap.
{
return hv_msi_gic_irq_domain;
}
+
+/*
+ * SPIs are used for interrupts of PCI devices and SPIs is managed via GICD
+ * registers which Hyper-V already supports, so no hypercall needed.
+ */
+static void hv_arch_irq_unmask(struct irq_data *data) { }
#endif /* CONFIG_ARM64 */
/**
irq_chip_mask_parent(data);
}
-/**
- * hv_irq_unmask() - "Unmask" the IRQ by setting its current
- * affinity.
- * @data: Describes the IRQ
- *
- * Build new a destination for the MSI and make a hypercall to
- * update the Interrupt Redirection Table. "Device Logical ID"
- * is built out of this PCI bus's instance GUID and the function
- * number of the device.
- */
static void hv_irq_unmask(struct irq_data *data)
{
- struct msi_desc *msi_desc = irq_data_get_msi_desc(data);
- struct hv_retarget_device_interrupt *params;
- struct hv_pcibus_device *hbus;
- struct cpumask *dest;
- cpumask_var_t tmp;
- struct pci_bus *pbus;
- struct pci_dev *pdev;
- unsigned long flags;
- u32 var_size = 0;
- int cpu, nr_bank;
- u64 res;
-
- dest = irq_data_get_effective_affinity_mask(data);
- pdev = msi_desc_to_pci_dev(msi_desc);
- pbus = pdev->bus;
- hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata);
-
- spin_lock_irqsave(&hbus->retarget_msi_interrupt_lock, flags);
-
- params = &hbus->retarget_msi_interrupt_params;
- memset(params, 0, sizeof(*params));
- params->partition_id = HV_PARTITION_ID_SELF;
- params->int_entry.source = HV_INTERRUPT_SOURCE_MSI;
- hv_set_msi_entry_from_desc(¶ms->int_entry.msi_entry, msi_desc);
- params->device_id = (hbus->hdev->dev_instance.b[5] << 24) |
- (hbus->hdev->dev_instance.b[4] << 16) |
- (hbus->hdev->dev_instance.b[7] << 8) |
- (hbus->hdev->dev_instance.b[6] & 0xf8) |
- PCI_FUNC(pdev->devfn);
- params->int_target.vector = hv_msi_get_int_vector(data);
-
- /*
- * Honoring apic->delivery_mode set to APIC_DELIVERY_MODE_FIXED by
- * setting the HV_DEVICE_INTERRUPT_TARGET_MULTICAST flag results in a
- * spurious interrupt storm. Not doing so does not seem to have a
- * negative effect (yet?).
- */
-
- if (hbus->protocol_version >= PCI_PROTOCOL_VERSION_1_2) {
- /*
- * PCI_PROTOCOL_VERSION_1_2 supports the VP_SET version of the
- * HVCALL_RETARGET_INTERRUPT hypercall, which also coincides
- * with >64 VP support.
- * ms_hyperv.hints & HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED
- * is not sufficient for this hypercall.
- */
- params->int_target.flags |=
- HV_DEVICE_INTERRUPT_TARGET_PROCESSOR_SET;
-
- if (!alloc_cpumask_var(&tmp, GFP_ATOMIC)) {
- res = 1;
- goto exit_unlock;
- }
-
- cpumask_and(tmp, dest, cpu_online_mask);
- nr_bank = cpumask_to_vpset(¶ms->int_target.vp_set, tmp);
- free_cpumask_var(tmp);
-
- if (nr_bank <= 0) {
- res = 1;
- goto exit_unlock;
- }
-
- /*
- * var-sized hypercall, var-size starts after vp_mask (thus
- * vp_set.format does not count, but vp_set.valid_bank_mask
- * does).
- */
- var_size = 1 + nr_bank;
- } else {
- for_each_cpu_and(cpu, dest, cpu_online_mask) {
- params->int_target.vp_mask |=
- (1ULL << hv_cpu_number_to_vp_number(cpu));
- }
- }
-
- res = hv_do_hypercall(HVCALL_RETARGET_INTERRUPT | (var_size << 17),
- params, NULL);
-
-exit_unlock:
- spin_unlock_irqrestore(&hbus->retarget_msi_interrupt_lock, flags);
-
- /*
- * During hibernation, when a CPU is offlined, the kernel tries
- * to move the interrupt to the remaining CPUs that haven't
- * been offlined yet. In this case, the below hv_do_hypercall()
- * always fails since the vmbus channel has been closed:
- * refer to cpu_disable_common() -> fixup_irqs() ->
- * irq_migrate_all_off_this_cpu() -> migrate_one_irq().
- *
- * Suppress the error message for hibernation because the failure
- * during hibernation does not matter (at this time all the devices
- * have been frozen). Note: the correct affinity info is still updated
- * into the irqdata data structure in migrate_one_irq() ->
- * irq_do_set_affinity() -> hv_set_affinity(), so later when the VM
- * resumes, hv_pci_restore_msi_state() is able to correctly restore
- * the interrupt with the correct affinity.
- */
- if (!hv_result_success(res) && hbus->state != hv_pcibus_removing)
- dev_err(&hbus->hdev->device,
- "%s() failed: %#llx", __func__, res);
+ hv_arch_irq_unmask(data);
if (data->parent_data->chip->irq_unmask)
irq_chip_unmask_parent(data);
projects / linux-2.6-microblaze.git / blobdiff