priv->pause, tx_cnt);
}
-static void stmmac_validate(struct phylink_config *config,
- unsigned long *supported,
- struct phylink_link_state *state)
+static struct phylink_pcs *stmmac_mac_select_pcs(struct phylink_config *config,
+ phy_interface_t interface)
{
struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
- __ETHTOOL_DECLARE_LINK_MODE_MASK(mac_supported) = { 0, };
- __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
- int tx_cnt = priv->plat->tx_queues_to_use;
- int max_speed = priv->plat->max_speed;
-
- phylink_set(mac_supported, 10baseT_Half);
- phylink_set(mac_supported, 10baseT_Full);
- phylink_set(mac_supported, 100baseT_Half);
- phylink_set(mac_supported, 100baseT_Full);
- phylink_set(mac_supported, 1000baseT_Half);
- phylink_set(mac_supported, 1000baseT_Full);
- phylink_set(mac_supported, 1000baseKX_Full);
-
- phylink_set(mac_supported, Autoneg);
- phylink_set(mac_supported, Pause);
- phylink_set(mac_supported, Asym_Pause);
- phylink_set_port_modes(mac_supported);
-
- /* Cut down 1G if asked to */
- if ((max_speed > 0) && (max_speed < 1000)) {
- phylink_set(mask, 1000baseT_Full);
- phylink_set(mask, 1000baseX_Full);
- } else if (priv->plat->has_gmac4) {
- if (!max_speed || max_speed >= 2500) {
- phylink_set(mac_supported, 2500baseT_Full);
- phylink_set(mac_supported, 2500baseX_Full);
- }
- } else if (priv->plat->has_xgmac) {
- if (!max_speed || (max_speed >= 2500)) {
- phylink_set(mac_supported, 2500baseT_Full);
- phylink_set(mac_supported, 2500baseX_Full);
- }
- if (!max_speed || (max_speed >= 5000)) {
- phylink_set(mac_supported, 5000baseT_Full);
- }
- if (!max_speed || (max_speed >= 10000)) {
- phylink_set(mac_supported, 10000baseSR_Full);
- phylink_set(mac_supported, 10000baseLR_Full);
- phylink_set(mac_supported, 10000baseER_Full);
- phylink_set(mac_supported, 10000baseLRM_Full);
- phylink_set(mac_supported, 10000baseT_Full);
- phylink_set(mac_supported, 10000baseKX4_Full);
- phylink_set(mac_supported, 10000baseKR_Full);
- }
- if (!max_speed || (max_speed >= 25000)) {
- phylink_set(mac_supported, 25000baseCR_Full);
- phylink_set(mac_supported, 25000baseKR_Full);
- phylink_set(mac_supported, 25000baseSR_Full);
- }
- if (!max_speed || (max_speed >= 40000)) {
- phylink_set(mac_supported, 40000baseKR4_Full);
- phylink_set(mac_supported, 40000baseCR4_Full);
- phylink_set(mac_supported, 40000baseSR4_Full);
- phylink_set(mac_supported, 40000baseLR4_Full);
- }
- if (!max_speed || (max_speed >= 50000)) {
- phylink_set(mac_supported, 50000baseCR2_Full);
- phylink_set(mac_supported, 50000baseKR2_Full);
- phylink_set(mac_supported, 50000baseSR2_Full);
- phylink_set(mac_supported, 50000baseKR_Full);
- phylink_set(mac_supported, 50000baseSR_Full);
- phylink_set(mac_supported, 50000baseCR_Full);
- phylink_set(mac_supported, 50000baseLR_ER_FR_Full);
- phylink_set(mac_supported, 50000baseDR_Full);
- }
- if (!max_speed || (max_speed >= 100000)) {
- phylink_set(mac_supported, 100000baseKR4_Full);
- phylink_set(mac_supported, 100000baseSR4_Full);
- phylink_set(mac_supported, 100000baseCR4_Full);
- phylink_set(mac_supported, 100000baseLR4_ER4_Full);
- phylink_set(mac_supported, 100000baseKR2_Full);
- phylink_set(mac_supported, 100000baseSR2_Full);
- phylink_set(mac_supported, 100000baseCR2_Full);
- phylink_set(mac_supported, 100000baseLR2_ER2_FR2_Full);
- phylink_set(mac_supported, 100000baseDR2_Full);
- }
- }
-
- /* Half-Duplex can only work with single queue */
- if (tx_cnt > 1) {
- phylink_set(mask, 10baseT_Half);
- phylink_set(mask, 100baseT_Half);
- phylink_set(mask, 1000baseT_Half);
- }
-
- linkmode_and(supported, supported, mac_supported);
- linkmode_andnot(supported, supported, mask);
- linkmode_and(state->advertising, state->advertising, mac_supported);
- linkmode_andnot(state->advertising, state->advertising, mask);
+ if (!priv->hw->xpcs)
+ return NULL;
- /* If PCS is supported, check which modes it supports. */
- if (priv->hw->xpcs)
- xpcs_validate(priv->hw->xpcs, supported, state);
+ return &priv->hw->xpcs->pcs;
}
static void stmmac_mac_config(struct phylink_config *config, unsigned int mode,
}
static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
- .validate = stmmac_validate,
+ .validate = phylink_generic_validate,
+ .mac_select_pcs = stmmac_mac_select_pcs,
.mac_config = stmmac_mac_config,
.mac_link_down = stmmac_mac_link_down,
.mac_link_up = stmmac_mac_link_up,
{
struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat->phylink_node);
+ int max_speed = priv->plat->max_speed;
int mode = priv->plat->phy_interface;
struct phylink *phylink;
priv->phylink_config.dev = &priv->dev->dev;
priv->phylink_config.type = PHYLINK_NETDEV;
- priv->phylink_config.pcs_poll = true;
if (priv->plat->mdio_bus_data)
priv->phylink_config.ovr_an_inband =
mdio_bus_data->xpcs_an_inband;
if (!fwnode)
fwnode = dev_fwnode(priv->device);
+ /* Set the platform/firmware specified interface mode */
+ __set_bit(mode, priv->phylink_config.supported_interfaces);
+
+ /* If we have an xpcs, it defines which PHY interfaces are supported. */
+ if (priv->hw->xpcs)
+ xpcs_get_interfaces(priv->hw->xpcs,
+ priv->phylink_config.supported_interfaces);
+
+ priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100;
+
+ if (!max_speed || max_speed >= 1000)
+ priv->phylink_config.mac_capabilities |= MAC_1000;
+
+ if (priv->plat->has_gmac4) {
+ if (!max_speed || max_speed >= 2500)
+ priv->phylink_config.mac_capabilities |= MAC_2500FD;
+ } else if (priv->plat->has_xgmac) {
+ if (!max_speed || max_speed >= 2500)
+ priv->phylink_config.mac_capabilities |= MAC_2500FD;
+ if (!max_speed || max_speed >= 5000)
+ priv->phylink_config.mac_capabilities |= MAC_5000FD;
+ if (!max_speed || max_speed >= 10000)
+ priv->phylink_config.mac_capabilities |= MAC_10000FD;
+ if (!max_speed || max_speed >= 25000)
+ priv->phylink_config.mac_capabilities |= MAC_25000FD;
+ if (!max_speed || max_speed >= 40000)
+ priv->phylink_config.mac_capabilities |= MAC_40000FD;
+ if (!max_speed || max_speed >= 50000)
+ priv->phylink_config.mac_capabilities |= MAC_50000FD;
+ if (!max_speed || max_speed >= 100000)
+ priv->phylink_config.mac_capabilities |= MAC_100000FD;
+ }
+
+ /* Half-Duplex can only work with single queue */
+ if (priv->plat->tx_queues_to_use > 1)
+ priv->phylink_config.mac_capabilities &=
+ ~(MAC_10HD | MAC_100HD | MAC_1000HD);
+
phylink = phylink_create(&priv->phylink_config, fwnode,
mode, &stmmac_phylink_mac_ops);
if (IS_ERR(phylink))
return PTR_ERR(phylink);
- if (priv->hw->xpcs)
- phylink_set_pcs(phylink, &priv->hw->xpcs->pcs);
-
priv->phylink = phylink;
return 0;
}
projects / linux-2.6-microblaze.git / blobdiff