ide: remove the legacy ide driver

[linux-2.6-microblaze.git] / drivers / ide / ide-scan-pci.c

diff --git a/drivers/ide/ide-scan-pci.c b/drivers/ide/ide-scan-pci.c
deleted file mode 100644 (file)
index b0411a1..0000000
--- a/drivers/ide/ide-scan-pci.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * support for probing IDE PCI devices in the PCI bus order
- *
- * Copyright (c) 1998-2000  Andre Hedrick <andre@linux-ide.org>
- * Copyright (c) 1995-1998  Mark Lord
- *
- * May be copied or modified under the terms of the GNU General Public License
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/ide.h>
-
-/*
- *     Module interfaces
- */
-
-static int pre_init = 1;               /* Before first ordered IDE scan */
-static LIST_HEAD(ide_pci_drivers);
-
-/*
- *     __ide_pci_register_driver       -       attach IDE driver
- *     @driver: pci driver
- *     @module: owner module of the driver
- *
- *     Registers a driver with the IDE layer. The IDE layer arranges that
- *     boot time setup is done in the expected device order and then
- *     hands the controllers off to the core PCI code to do the rest of
- *     the work.
- *
- *     Returns are the same as for pci_register_driver
- */
-
-int __ide_pci_register_driver(struct pci_driver *driver, struct module *module,
-                             const char *mod_name)
-{
-       if (!pre_init)
-               return __pci_register_driver(driver, module, mod_name);
-       driver->driver.owner = module;
-       list_add_tail(&driver->node, &ide_pci_drivers);
-       return 0;
-}
-EXPORT_SYMBOL_GPL(__ide_pci_register_driver);
-
-/**
- *     ide_scan_pcidev         -       find an IDE driver for a device
- *     @dev: PCI device to check
- *
- *     Look for an IDE driver to handle the device we are considering.
- *     This is only used during boot up to get the ordering correct. After
- *     boot up the pci layer takes over the job.
- */
-
-static int __init ide_scan_pcidev(struct pci_dev *dev)
-{
-       struct list_head *l;
-       struct pci_driver *d;
-       int ret;
-
-       list_for_each(l, &ide_pci_drivers) {
-               d = list_entry(l, struct pci_driver, node);
-               if (d->id_table) {
-                       const struct pci_device_id *id =
-                               pci_match_id(d->id_table, dev);
-
-                       if (id != NULL) {
-                               pci_assign_irq(dev);
-                               ret = d->probe(dev, id);
-                               if (ret >= 0) {
-                                       dev->driver = d;
-                                       pci_dev_get(dev);
-                                       return 1;
-                               }
-                       }
-               }
-       }
-       return 0;
-}
-
-/**
- *     ide_scan_pcibus         -       perform the initial IDE driver scan
- *
- *     Perform the initial bus rather than driver ordered scan of the
- *     PCI drivers. After this all IDE pci handling becomes standard
- *     module ordering not traditionally ordered.
- */
-
-static int __init ide_scan_pcibus(void)
-{
-       struct pci_dev *dev = NULL;
-       struct pci_driver *d, *tmp;
-
-       pre_init = 0;
-       for_each_pci_dev(dev)
-               ide_scan_pcidev(dev);
-
-       /*
-        *      Hand the drivers over to the PCI layer now we
-        *      are post init.
-        */
-
-       list_for_each_entry_safe(d, tmp, &ide_pci_drivers, node) {
-               list_del(&d->node);
-               if (__pci_register_driver(d, d->driver.owner,
-                                         d->driver.mod_name))
-                       printk(KERN_ERR "%s: failed to register %s driver\n",
-                                       __func__, d->driver.mod_name);
-       }
-
-       return 0;
-}
-device_initcall(ide_scan_pcibus);