i915_vma_put(dpt->vma);
}
+static bool
+intel_reuse_initial_plane_obj(struct drm_i915_private *i915,
+ const struct intel_initial_plane_config *plane_config,
+ struct drm_framebuffer **fb,
+ struct i915_vma **vma)
+{
+ struct intel_crtc *crtc;
+
+ for_each_intel_crtc(&i915->drm, crtc) {
+ struct intel_crtc_state *crtc_state =
+ to_intel_crtc_state(crtc->base.state);
+ struct intel_plane *plane =
+ to_intel_plane(crtc->base.primary);
+ struct intel_plane_state *plane_state =
+ to_intel_plane_state(plane->base.state);
+
+ if (!crtc_state->uapi.active)
+ continue;
+
+ if (!plane_state->ggtt_vma)
+ continue;
+
+ if (intel_plane_ggtt_offset(plane_state) == plane_config->base) {
+ *fb = plane_state->hw.fb;
+ *vma = plane_state->ggtt_vma;
+ return true;
+ }
+ }
+
+ return false;
+}
+
static void
-intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
+intel_find_initial_plane_obj(struct intel_crtc *crtc,
struct intel_initial_plane_config *plane_config)
{
- struct drm_device *dev = intel_crtc->base.dev;
+ struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
- struct drm_crtc *c;
- struct drm_plane *primary = intel_crtc->base.primary;
- struct drm_plane_state *plane_state = primary->state;
- struct intel_plane *intel_plane = to_intel_plane(primary);
- struct intel_plane_state *intel_state =
- to_intel_plane_state(plane_state);
struct intel_crtc_state *crtc_state =
- to_intel_crtc_state(intel_crtc->base.state);
+ to_intel_crtc_state(crtc->base.state);
+ struct intel_plane *plane =
+ to_intel_plane(crtc->base.primary);
+ struct intel_plane_state *plane_state =
+ to_intel_plane_state(plane->base.state);
struct drm_framebuffer *fb;
struct i915_vma *vma;
if (!plane_config->fb)
return;
- if (intel_alloc_initial_plane_obj(intel_crtc, plane_config)) {
+ if (intel_alloc_initial_plane_obj(crtc, plane_config)) {
fb = &plane_config->fb->base;
vma = plane_config->vma;
goto valid_fb;
* Failed to alloc the obj, check to see if we should share
* an fb with another CRTC instead
*/
- for_each_crtc(dev, c) {
- struct intel_plane_state *state;
-
- if (c == &intel_crtc->base)
- continue;
-
- if (!to_intel_crtc_state(c->state)->uapi.active)
- continue;
-
- state = to_intel_plane_state(c->primary->state);
- if (!state->ggtt_vma)
- continue;
-
- if (intel_plane_ggtt_offset(state) == plane_config->base) {
- fb = state->hw.fb;
- vma = state->ggtt_vma;
- goto valid_fb;
- }
- }
+ if (intel_reuse_initial_plane_obj(dev_priv, plane_config, &fb, &vma))
+ goto valid_fb;
/*
* We've failed to reconstruct the BIOS FB. Current display state
* simplest solution is to just disable the primary plane now and
* pretend the BIOS never had it enabled.
*/
- intel_plane_disable_noatomic(intel_crtc, intel_plane);
+ intel_plane_disable_noatomic(crtc, plane);
if (crtc_state->bigjoiner) {
struct intel_crtc *slave =
crtc_state->bigjoiner_linked_crtc;
return;
valid_fb:
- plane_state->rotation = plane_config->rotation;
- intel_fb_fill_view(to_intel_framebuffer(fb), plane_state->rotation,
- &intel_state->view);
+ plane_state->uapi.rotation = plane_config->rotation;
+ intel_fb_fill_view(to_intel_framebuffer(fb),
+ plane_state->uapi.rotation, &plane_state->view);
__i915_vma_pin(vma);
- intel_state->ggtt_vma = i915_vma_get(vma);
- if (intel_plane_uses_fence(intel_state) && i915_vma_pin_fence(vma) == 0)
- if (vma->fence)
- intel_state->flags |= PLANE_HAS_FENCE;
+ plane_state->ggtt_vma = i915_vma_get(vma);
+ if (intel_plane_uses_fence(plane_state) &&
+ i915_vma_pin_fence(vma) == 0 && vma->fence)
+ plane_state->flags |= PLANE_HAS_FENCE;
- plane_state->src_x = 0;
- plane_state->src_y = 0;
- plane_state->src_w = fb->width << 16;
- plane_state->src_h = fb->height << 16;
+ plane_state->uapi.src_x = 0;
+ plane_state->uapi.src_y = 0;
+ plane_state->uapi.src_w = fb->width << 16;
+ plane_state->uapi.src_h = fb->height << 16;
- plane_state->crtc_x = 0;
- plane_state->crtc_y = 0;
- plane_state->crtc_w = fb->width;
- plane_state->crtc_h = fb->height;
+ plane_state->uapi.crtc_x = 0;
+ plane_state->uapi.crtc_y = 0;
+ plane_state->uapi.crtc_w = fb->width;
+ plane_state->uapi.crtc_h = fb->height;
if (plane_config->tiling)
dev_priv->preserve_bios_swizzle = true;
- plane_state->fb = fb;
+ plane_state->uapi.fb = fb;
drm_framebuffer_get(fb);
- plane_state->crtc = &intel_crtc->base;
- intel_plane_copy_uapi_to_hw_state(intel_state, intel_state,
- intel_crtc);
+ plane_state->uapi.crtc = &crtc->base;
+ intel_plane_copy_uapi_to_hw_state(plane_state, plane_state, crtc);
intel_frontbuffer_flush(to_intel_frontbuffer(fb), ORIGIN_DIRTYFB);
- atomic_or(to_intel_plane(primary)->frontbuffer_bit,
- &to_intel_frontbuffer(fb)->bits);
+ atomic_or(plane->frontbuffer_bit, &to_intel_frontbuffer(fb)->bits);
}
unsigned int
intel_wait_for_vblank(dev_priv, crtc->pipe);
}
-static void intel_crtc_dpms_overlay_disable(struct intel_crtc *intel_crtc)
+static void intel_crtc_dpms_overlay_disable(struct intel_crtc *crtc)
{
- if (intel_crtc->overlay)
- (void) intel_overlay_switch_off(intel_crtc->overlay);
+ if (crtc->overlay)
+ (void) intel_overlay_switch_off(crtc->overlay);
/* Let userspace switch the overlay on again. In most cases userspace
* has to recompute where to put it anyway.
struct intel_load_detect_pipe *old,
struct drm_modeset_acquire_ctx *ctx)
{
- struct intel_crtc *intel_crtc;
- struct intel_encoder *intel_encoder =
+ struct intel_encoder *encoder =
intel_attached_encoder(to_intel_connector(connector));
- struct drm_crtc *possible_crtc;
- struct drm_encoder *encoder = &intel_encoder->base;
- struct drm_crtc *crtc = NULL;
- struct drm_device *dev = encoder->dev;
+ struct intel_crtc *possible_crtc;
+ struct intel_crtc *crtc = NULL;
+ struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct drm_mode_config *config = &dev->mode_config;
struct drm_atomic_state *state = NULL, *restore_state = NULL;
struct drm_connector_state *connector_state;
struct intel_crtc_state *crtc_state;
- int ret, i = -1;
+ int ret;
drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
connector->base.id, connector->name,
- encoder->base.id, encoder->name);
+ encoder->base.base.id, encoder->base.name);
old->restore_state = NULL;
/* See if we already have a CRTC for this connector */
if (connector->state->crtc) {
- crtc = connector->state->crtc;
+ crtc = to_intel_crtc(connector->state->crtc);
- ret = drm_modeset_lock(&crtc->mutex, ctx);
+ ret = drm_modeset_lock(&crtc->base.mutex, ctx);
if (ret)
goto fail;
}
/* Find an unused one (if possible) */
- for_each_crtc(dev, possible_crtc) {
- i++;
- if (!(encoder->possible_crtcs & (1 << i)))
+ for_each_intel_crtc(dev, possible_crtc) {
+ if (!(encoder->base.possible_crtcs &
+ drm_crtc_mask(&possible_crtc->base)))
continue;
- ret = drm_modeset_lock(&possible_crtc->mutex, ctx);
+ ret = drm_modeset_lock(&possible_crtc->base.mutex, ctx);
if (ret)
goto fail;
- if (possible_crtc->state->enable) {
- drm_modeset_unlock(&possible_crtc->mutex);
+ if (possible_crtc->base.state->enable) {
+ drm_modeset_unlock(&possible_crtc->base.mutex);
continue;
}
}
found:
- intel_crtc = to_intel_crtc(crtc);
-
state = drm_atomic_state_alloc(dev);
restore_state = drm_atomic_state_alloc(dev);
if (!state || !restore_state) {
goto fail;
}
- ret = drm_atomic_set_crtc_for_connector(connector_state, crtc);
+ ret = drm_atomic_set_crtc_for_connector(connector_state, &crtc->base);
if (ret)
goto fail;
- crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
+ crtc_state = intel_atomic_get_crtc_state(state, crtc);
if (IS_ERR(crtc_state)) {
ret = PTR_ERR(crtc_state);
goto fail;
if (ret)
goto fail;
- ret = intel_modeset_disable_planes(state, crtc);
+ ret = intel_modeset_disable_planes(state, &crtc->base);
if (ret)
goto fail;
ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(restore_state, connector));
if (!ret)
- ret = PTR_ERR_OR_ZERO(drm_atomic_get_crtc_state(restore_state, crtc));
+ ret = PTR_ERR_OR_ZERO(drm_atomic_get_crtc_state(restore_state, &crtc->base));
if (!ret)
- ret = drm_atomic_add_affected_planes(restore_state, crtc);
+ ret = drm_atomic_add_affected_planes(restore_state, &crtc->base);
if (ret) {
drm_dbg_kms(&dev_priv->drm,
"Failed to create a copy of old state to restore: %i\n",
drm_atomic_state_put(state);
/* let the connector get through one full cycle before testing */
- intel_wait_for_vblank(dev_priv, intel_crtc->pipe);
+ intel_wait_for_vblank(dev_priv, crtc->pipe);
return true;
fail:
}
if (dev_priv->display.compute_pipe_wm) {
- ret = dev_priv->display.compute_pipe_wm(crtc_state);
+ ret = dev_priv->display.compute_pipe_wm(state, crtc);
if (ret) {
drm_dbg_kms(&dev_priv->drm,
"Target pipe watermarks are invalid\n");
return ret;
}
+
}
if (dev_priv->display.compute_intermediate_wm) {
* old state and the new state. We can program these
* immediately.
*/
- ret = dev_priv->display.compute_intermediate_wm(crtc_state);
+ ret = dev_priv->display.compute_intermediate_wm(state, crtc);
if (ret) {
drm_dbg_kms(&dev_priv->drm,
"No valid intermediate pipe watermarks are possible\n");
/* object is backed with LMEM for discrete */
i915 = to_i915(obj->base.dev);
- if (HAS_LMEM(i915) && !i915_gem_object_is_lmem(obj)) {
+ if (HAS_LMEM(i915) && !i915_gem_object_validates_to_lmem(obj)) {
/* object is "remote", not in local memory */
i915_gem_object_put(obj);
return ERR_PTR(-EREMOTE);
projects / linux-2.6-microblaze.git / blobdiff