Merge tag 'for-5.15/io_uring-2021-09-04' of git://git.kernel.dk/linux-block

[linux-2.6-microblaze.git] / arch / mips / cavium-octeon / executive / cvmx-pko.c

diff --git a/arch/mips/cavium-octeon/executive/cvmx-pko.c b/arch/mips/cavium-octeon/executive/cvmx-pko.c
index b0efc35..7c4879e 100644 (file)
--- a/arch/mips/cavium-octeon/executive/cvmx-pko.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-pko.c
@@ -35,7 +35,7 @@
 #include <asm/octeon/cvmx-pko.h>
 #include <asm/octeon/cvmx-helper.h>
 
-/**
+/*
  * Internal state of packet output
  */
 
@@ -176,7 +176,7 @@ static void __cvmx_pko_chip_init(void)
        }
 }
 
-/**
+/*
  * Call before any other calls to initialize the packet
  * output system.  This does chip global config, and should only be
  * done by one core.
@@ -229,7 +229,7 @@ void cvmx_pko_initialize_global(void)
        }
 }
 
-/**
+/*
  * This function does per-core initialization required by the PKO routines.
  * This must be called on all cores that will do packet output, and must
  * be called after the FPA has been initialized and filled with pages.
@@ -243,7 +243,7 @@ int cvmx_pko_initialize_local(void)
        return 0;
 }
 
-/**
+/*
  * Enables the packet output hardware. It must already be
  * configured.
  */
@@ -266,7 +266,7 @@ void cvmx_pko_enable(void)
        cvmx_write_csr(CVMX_PKO_REG_FLAGS, flags.u64);
 }
 
-/**
+/*
  * Disables the packet output. Does not affect any configuration.
  */
 void cvmx_pko_disable(void)
@@ -278,7 +278,7 @@ void cvmx_pko_disable(void)
 }
 EXPORT_SYMBOL_GPL(cvmx_pko_disable);
 
-/**
+/*
  * Reset the packet output.
  */
 static void __cvmx_pko_reset(void)
@@ -289,7 +289,7 @@ static void __cvmx_pko_reset(void)
        cvmx_write_csr(CVMX_PKO_REG_FLAGS, pko_reg_flags.u64);
 }
 
-/**
+/*
  * Shutdown and free resources required by packet output.
  */
 void cvmx_pko_shutdown(void)
@@ -320,7 +320,7 @@ void cvmx_pko_shutdown(void)
 }
 EXPORT_SYMBOL_GPL(cvmx_pko_shutdown);
 
-/**
+/*
  * Configure a output port and the associated queues for use.
  *
  * @port:      Port to configure.
@@ -548,7 +548,7 @@ cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, uint64_t base_queue,
 }
 
 #ifdef PKO_DEBUG
-/**
+/*
  * Show map of ports -> queues for different cores.
  */
 void cvmx_pko_show_queue_map()
@@ -573,7 +573,7 @@ void cvmx_pko_show_queue_map()
 }
 #endif
 
-/**
+/*
  * Rate limit a PKO port to a max packets/sec. This function is only
  * supported on CN51XX and higher, excluding CN58XX.
  *
@@ -606,7 +606,7 @@ int cvmx_pko_rate_limit_packets(int port, int packets_s, int burst)
        return 0;
 }
 
-/**
+/*
  * Rate limit a PKO port to a max bits/sec. This function is only
  * supported on CN51XX and higher, excluding CN58XX.
  *