Merge branch 'work.init' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

[linux-2.6-microblaze.git] / arch / arm64 / boot / dts / qcom / pm660l.dtsi

diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi
index edba6de..05086cb 100644 (file)
--- a/arch/arm64/boot/dts/qcom/pm660l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -3,9 +3,35 @@
  * Copyright (c) 2020, Konrad Dybcio
  */
 
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+       thermal-zones {
+               pm660l {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&pm660l_temp>;
+
+                       trips {
+                               pm660l_alert0: pm660l-alert0 {
+                                       temperature = <95000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+                               pm660l_crit: pm660l-crit {
+                                       temperature = <125000>;
+                                       hysteresis = <2000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+       };
+};
 
 &spmi_bus {
 
@@ -15,6 +41,13 @@
                #address-cells = <1>;
                #size-cells = <0>;
 
+               pm660l_temp: temp-alarm@2400 {
+                       compatible = "qcom,spmi-temp-alarm";
+                       reg = <0x2400>;
+                       interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+                       #thermal-sensor-cells = <0>;
+               };
+
                pm660l_gpios: gpios@c000 {
                        compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio";
                        reg = <0xc000>;
@@ -31,6 +64,27 @@
                reg = <0x3 SPMI_USID>;
                #address-cells = <1>;
                #size-cells = <0>;
+
+               pm660l_wled: leds@d800 {
+                       compatible = "qcom,pm660l-wled";
+                       reg = <0xd800 0xd900>;
+                       interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>;
+                       interrupt-names = "ovp";
+                       label = "backlight";
+
+                       qcom,switching-freq = <800>;
+                       qcom,ovp-millivolt = <29600>;
+                       qcom,current-boost-limit = <970>;
+                       qcom,current-limit-microamp = <20000>;
+                       qcom,num-strings = <2>;
+                       qcom,enabled-strings = <0 1>;
+
+                       status = "disabled";
+               };
+
+               pm660l_spmi_regulators: pm660l-regulators {
+                       compatible = "qcom,pm660l-regulators";
+               };
        };
 };