select ARCH_BINFMT_ELF_STATE
select ARCH_HAS_DEBUG_VIRTUAL
select ARCH_HAS_DEBUG_VM_PGTABLE
- select ARCH_HAS_DEVMEM_IS_ALLOWED
select ARCH_HAS_DMA_PREP_COHERENT
select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
select ARCH_HAS_FAST_MULTIPLIER
select ARCH_USE_QUEUED_RWLOCKS
select ARCH_USE_QUEUED_SPINLOCKS
select ARCH_USE_SYM_ANNOTATIONS
+ select ARCH_SUPPORTS_DEBUG_PAGEALLOC
select ARCH_SUPPORTS_MEMORY_FAILURE
select ARCH_SUPPORTS_SHADOW_CALL_STACK if CC_HAVE_SHADOW_CALL_STACK
select ARCH_SUPPORTS_ATOMIC_RMW
select FRAME_POINTER
select GENERIC_ALLOCATOR
select GENERIC_ARCH_TOPOLOGY
- select GENERIC_CLOCKEVENTS
select GENERIC_CLOCKEVENTS_BROADCAST
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
+ select GENERIC_LIB_DEVMEM_IS_ALLOWED
select GENERIC_PCI_IOMAP
select GENERIC_PTDUMP
select GENERIC_SCHED_CLOCK
select HANDLE_DOMAIN_IRQ
select HARDIRQS_SW_RESEND
select HAVE_MOVE_PMD
+ select HAVE_MOVE_PUD
select HAVE_PCI
select HAVE_ACPI_APEI if (ACPI && EFI)
select HAVE_ALIGNED_STRUCT_PAGE if SLUB
select HAVE_ARCH_JUMP_LABEL_RELATIVE
select HAVE_ARCH_KASAN if !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
select HAVE_ARCH_KASAN_SW_TAGS if HAVE_ARCH_KASAN
+ select HAVE_ARCH_KASAN_HW_TAGS if (HAVE_ARCH_KASAN && ARM64_MTE)
select HAVE_ARCH_KGDB
select HAVE_ARCH_MMAP_RND_BITS
select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
+ select HAVE_ARCH_PFN_VALID
select HAVE_ARCH_PREL32_RELOCATIONS
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_STACKLEAK
select HAVE_NMI
select HAVE_PATA_PLATFORM
select HAVE_PERF_EVENTS
+ select HAVE_PERF_EVENTS_NMI if ARM64_PSEUDO_NMI && HW_PERF_EVENTS
+ select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && HAVE_PERF_EVENTS_NMI
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
select HAVE_REGS_AND_STACK_ACCESS_API
select PCI_SYSCALL if PCI
select POWER_RESET
select POWER_SUPPLY
- select SET_FS
select SPARSE_IRQ
select SWIOTLB
select SYSCTL_EXCEPTION_TRACE
config KASAN_SHADOW_OFFSET
hex
- depends on KASAN
- default 0xdfffa00000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && !KASAN_SW_TAGS
- default 0xdfffd00000000000 if ARM64_VA_BITS_47 && !KASAN_SW_TAGS
- default 0xdffffe8000000000 if ARM64_VA_BITS_42 && !KASAN_SW_TAGS
- default 0xdfffffd000000000 if ARM64_VA_BITS_39 && !KASAN_SW_TAGS
- default 0xdffffffa00000000 if ARM64_VA_BITS_36 && !KASAN_SW_TAGS
- default 0xefff900000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && KASAN_SW_TAGS
- default 0xefffc80000000000 if ARM64_VA_BITS_47 && KASAN_SW_TAGS
- default 0xeffffe4000000000 if ARM64_VA_BITS_42 && KASAN_SW_TAGS
- default 0xefffffc800000000 if ARM64_VA_BITS_39 && KASAN_SW_TAGS
- default 0xeffffff900000000 if ARM64_VA_BITS_36 && KASAN_SW_TAGS
+ depends on KASAN_GENERIC || KASAN_SW_TAGS
+ default 0xdfff800000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && !KASAN_SW_TAGS
+ default 0xdfffc00000000000 if ARM64_VA_BITS_47 && !KASAN_SW_TAGS
+ default 0xdffffe0000000000 if ARM64_VA_BITS_42 && !KASAN_SW_TAGS
+ default 0xdfffffc000000000 if ARM64_VA_BITS_39 && !KASAN_SW_TAGS
+ default 0xdffffff800000000 if ARM64_VA_BITS_36 && !KASAN_SW_TAGS
+ default 0xefff800000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && KASAN_SW_TAGS
+ default 0xefffc00000000000 if ARM64_VA_BITS_47 && KASAN_SW_TAGS
+ default 0xeffffe0000000000 if ARM64_VA_BITS_42 && KASAN_SW_TAGS
+ default 0xefffffc000000000 if ARM64_VA_BITS_39 && KASAN_SW_TAGS
+ default 0xeffffff800000000 if ARM64_VA_BITS_36 && KASAN_SW_TAGS
default 0xffffffffffffffff
source "arch/arm64/Kconfig.platforms"
source "kernel/Kconfig.hz"
-config ARCH_SUPPORTS_DEBUG_PAGEALLOC
- def_bool y
-
config ARCH_SPARSEMEM_ENABLE
def_bool y
select SPARSEMEM_VMEMMAP_ENABLE
config ARCH_FLATMEM_ENABLE
def_bool !NUMA
-config HAVE_ARCH_PFN_VALID
- def_bool y
-
config HW_PERF_EVENTS
def_bool y
depends on ARM_PMU
The feature is detected at runtime, and will remain as a 'nop'
instruction if the cpu does not implement the feature.
+config AS_HAS_LDAPR
+ def_bool $(as-instr,.arch_extension rcpc)
+
config ARM64_LSE_ATOMICS
bool
default ARM64_USE_LSE_ATOMICS
menu "ARMv8.2 architectural features"
-config ARM64_UAO
- bool "Enable support for User Access Override (UAO)"
- default y
- help
- User Access Override (UAO; part of the ARMv8.2 Extensions)
- causes the 'unprivileged' variant of the load/store instructions to
- be overridden to be privileged.
-
- This option changes get_user() and friends to use the 'unprivileged'
- variant of the load/store instructions. This ensures that user-space
- really did have access to the supplied memory. When addr_limit is
- set to kernel memory the UAO bit will be set, allowing privileged
- access to kernel memory.
-
- Choosing this option will cause copy_to_user() et al to use user-space
- memory permissions.
-
- The feature is detected at runtime, the kernel will use the
- regular load/store instructions if the cpu does not implement the
- feature.
-
config ARM64_PMEM
bool "Enable support for persistent memory"
select ARCH_HAS_PMEM_API
menu "ARMv8.5 architectural features"
+config AS_HAS_ARMV8_5
+ def_bool $(cc-option,-Wa$(comma)-march=armv8.5-a)
+
config ARM64_BTI
bool "Branch Target Identification support"
default y
bool "Memory Tagging Extension support"
default y
depends on ARM64_AS_HAS_MTE && ARM64_TAGGED_ADDR_ABI
+ depends on AS_HAS_ARMV8_5
+ # Required for tag checking in the uaccess routines
+ depends on ARM64_PAN
select ARCH_USES_HIGH_VMA_FLAGS
help
Memory Tagging (part of the ARMv8.5 Extensions) provides
entering them here. As a minimum, you should specify the the
root device (e.g. root=/dev/nfs).
+choice
+ prompt "Kernel command line type" if CMDLINE != ""
+ default CMDLINE_FROM_BOOTLOADER
+ help
+ Choose how the kernel will handle the provided default kernel
+ command line string.
+
+config CMDLINE_FROM_BOOTLOADER
+ bool "Use bootloader kernel arguments if available"
+ help
+ Uses the command-line options passed by the boot loader. If
+ the boot loader doesn't provide any, the default kernel command
+ string provided in CMDLINE will be used.
+
+config CMDLINE_EXTEND
+ bool "Extend bootloader kernel arguments"
+ help
+ The command-line arguments provided by the boot loader will be
+ appended to the default kernel command string.
+
config CMDLINE_FORCE
bool "Always use the default kernel command string"
- depends on CMDLINE != ""
help
Always use the default kernel command string, even if the boot
loader passes other arguments to the kernel.
This is useful if you cannot or don't want to change the
command-line options your boot loader passes to the kernel.
+endchoice
+
config EFI_STUB
bool
select EFI_RUNTIME_WRAPPERS
select EFI_STUB
select EFI_GENERIC_STUB
+ imply IMA_SECURE_AND_OR_TRUSTED_BOOT
default y
help
This option provides support for runtime services provided
projects / linux-2.6-microblaze.git / blobdiff