.codec_pdata = &collie_ucb1x00_data,
};
+/* Battery management GPIOs */
+static struct gpiod_lookup_table collie_battery_gpiod_table = {
+ /* the MCP codec mcp0 has the ucb1x00 as attached device */
+ .dev_id = "ucb1x00",
+ .table = {
+ /* This is found on the main GPIO on the SA1100 */
+ GPIO_LOOKUP("gpio", COLLIE_GPIO_CO,
+ "main battery full", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio", COLLIE_GPIO_MAIN_BAT_LOW,
+ "main battery low", GPIO_ACTIVE_HIGH),
+ /*
+ * This is GPIO 0 on the Scoop expander, which is registered
+ * from common/scoop.c with this gpio chip label.
+ */
+ GPIO_LOOKUP("sharp-scoop", 0,
+ "main charge on", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static int collie_ir_startup(struct device *dev)
{
int rc = gpio_request(COLLIE_GPIO_IR_ON, "IrDA");
platform_scoop_config = &collie_pcmcia_config;
gpiod_add_lookup_table(&collie_power_gpiod_table);
+ gpiod_add_lookup_table(&collie_battery_gpiod_table);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret) {