+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/clock/dm816.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/omap.h>
-
-/ {
- compatible = "ti,dm816";
- interrupt-parent = <&intc>;
- #address-cells = <1>;
- #size-cells = <1>;
- chosen { };
-
- aliases {
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- ethernet0 = ð0;
- ethernet1 = ð1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
- cpu@0 {
- compatible = "arm,cortex-a8";
- device_type = "cpu";
- reg = <0>;
- };
- };
-
- pmu {
- compatible = "arm,cortex-a8-pmu";
- interrupts = <3>;
- };
-
- /*
- * The soc node represents the soc top level view. It is used for IPs
- * that are not memory mapped in the MPU view or for the MPU itself.
- */
- soc {
- compatible = "ti,omap-infra";
- mpu {
- compatible = "ti,omap3-mpu";
- ti,hwmods = "mpu";
- };
- };
-
- /*
- * XXX: Use a flat representation of the dm816x interconnect.
- * The real dm816x interconnect network is quite complex. Since
- * it will not bring real advantage to represent that in DT
- * for the moment, just use a fake OCP bus entry to represent
- * the whole bus hierarchy.
- */
- ocp {
- compatible = "simple-bus";
- reg = <0x44000000 0x10000>;
- interrupts = <9 10>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- prcm: prcm@48180000 {
- compatible = "ti,dm816-prcm", "simple-bus";
- reg = <0x48180000 0x4000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x48180000 0x4000>;
-
- prcm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- prcm_clockdomains: clockdomains {
- };
- };
-
- scrm: scrm@48140000 {
- compatible = "ti,dm816-scrm", "simple-bus";
- reg = <0x48140000 0x21000>;
- #address-cells = <1>;
- #size-cells = <1>;
- #pinctrl-cells = <1>;
- ranges = <0 0x48140000 0x21000>;
-
- dm816x_pinmux: pinmux@800 {
- compatible = "pinctrl-single";
- reg = <0x800 0x50a>;
- #address-cells = <1>;
- #size-cells = <0>;
- #pinctrl-cells = <1>;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0xf>;
- };
-
- /* Device Configuration Registers */
- scm_conf: syscon@600 {
- compatible = "syscon", "simple-bus";
- reg = <0x600 0x110>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x600 0x110>;
-
- usb_phy0: usb-phy@20 {
- compatible = "ti,dm8168-usb-phy";
- reg = <0x20 0x8>;
- reg-names = "phy";
- clocks = <&main_fapll 6>;
- clock-names = "refclk";
- #phy-cells = <0>;
- syscon = <&scm_conf>;
- };
-
- usb_phy1: usb-phy@28 {
- compatible = "ti,dm8168-usb-phy";
- reg = <0x28 0x8>;
- reg-names = "phy";
- clocks = <&main_fapll 6>;
- clock-names = "refclk";
- #phy-cells = <0>;
- syscon = <&scm_conf>;
- };
- };
-
- scrm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- scrm_clockdomains: clockdomains {
- };
- };
-
- target-module@49000000 {
- compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0x49000000 0x4>;
- reg-names = "rev";
- clocks = <&alwon_clkctrl DM816_TPCC_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x49000000 0x10000>;
-
- edma: dma@0 {
- compatible = "ti,edma3-tpcc";
- reg = <0 0x10000>;
- reg-names = "edma3_cc";
- interrupts = <12 13 14>;
- interrupt-names = "edma3_ccint", "edma3_mperr",
- "edma3_ccerrint";
- dma-requests = <64>;
- #dma-cells = <2>;
-
- ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
- <&edma_tptc2 3>, <&edma_tptc3 0>;
-
- ti,edma-memcpy-channels = <20 21>;
- };
- };
-
- target-module@49800000 {
- compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0x49800000 0x4>,
- <0x49800010 0x4>;
- reg-names = "rev", "sysc";
- ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
- ti,sysc-midle = <SYSC_IDLE_FORCE>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_SMART>;
- clocks = <&alwon_clkctrl DM816_TPTC0_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x49800000 0x100000>;
-
- edma_tptc0: dma@0 {
- compatible = "ti,edma3-tptc";
- reg = <0 0x100000>;
- interrupts = <112>;
- interrupt-names = "edma3_tcerrint";
- };
- };
-
- target-module@49900000 {
- compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0x49900000 0x4>,
- <0x49900010 0x4>;
- reg-names = "rev", "sysc";
- ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
- ti,sysc-midle = <SYSC_IDLE_FORCE>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_SMART>;
- clocks = <&alwon_clkctrl DM816_TPTC1_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x49900000 0x100000>;
-
- edma_tptc1: dma@0 {
- compatible = "ti,edma3-tptc";
- reg = <0 0x100000>;
- interrupts = <113>;
- interrupt-names = "edma3_tcerrint";
- };
- };
-
- target-module@49a00000 {
- compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0x49a00000 0x4>,
- <0x49a00010 0x4>;
- reg-names = "rev", "sysc";
- ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
- ti,sysc-midle = <SYSC_IDLE_FORCE>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_SMART>;
- clocks = <&alwon_clkctrl DM816_TPTC2_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x49a00000 0x100000>;
-
- edma_tptc2: dma@0 {
- compatible = "ti,edma3-tptc";
- reg = <0 0x100000>;
- interrupts = <114>;
- interrupt-names = "edma3_tcerrint";
- };
- };
-
- target-module@49b00000 {
- compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0x49b00000 0x4>,
- <0x49b00010 0x4>;
- reg-names = "rev", "sysc";
- ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
- ti,sysc-midle = <SYSC_IDLE_FORCE>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_SMART>;
- clocks = <&alwon_clkctrl DM816_TPTC3_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x49b00000 0x100000>;
-
- edma_tptc3: dma@0 {
- compatible = "ti,edma3-tptc";
- reg = <0 0x100000>;
- interrupts = <115>;
- interrupt-names = "edma3_tcerrint";
- };
- };
-
- elm: elm@48080000 {
- compatible = "ti,am3352-elm";
- ti,hwmods = "elm";
- reg = <0x48080000 0x2000>;
- interrupts = <4>;
- };
-
- gpio1: gpio@48032000 {
- compatible = "ti,omap4-gpio";
- ti,hwmods = "gpio1";
- ti,gpio-always-on;
- reg = <0x48032000 0x1000>;
- interrupts = <96>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@4804c000 {
- compatible = "ti,omap4-gpio";
- ti,hwmods = "gpio2";
- ti,gpio-always-on;
- reg = <0x4804c000 0x1000>;
- interrupts = <98>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpmc: gpmc@50000000 {
- compatible = "ti,am3352-gpmc";
- ti,hwmods = "gpmc";
- reg = <0x50000000 0x2000>;
- #address-cells = <2>;
- #size-cells = <1>;
- interrupts = <100>;
- dmas = <&edma 52 0>;
- dma-names = "rxtx";
- gpmc,num-cs = <6>;
- gpmc,num-waitpins = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- i2c1: i2c@48028000 {
- compatible = "ti,omap4-i2c";
- ti,hwmods = "i2c1";
- reg = <0x48028000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <70>;
- };
-
- i2c2: i2c@4802a000 {
- compatible = "ti,omap4-i2c";
- ti,hwmods = "i2c2";
- reg = <0x4802a000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <71>;
- };
-
- intc: interrupt-controller@48200000 {
- compatible = "ti,dm816-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x48200000 0x1000>;
- };
-
- rtc: rtc@480c0000 {
- compatible = "ti,am3352-rtc", "ti,da830-rtc";
- reg = <0x480c0000 0x1000>;
- interrupts = <75 76>;
- ti,hwmods = "rtc";
- };
-
- mailbox: mailbox@480c8000 {
- compatible = "ti,omap4-mailbox";
- reg = <0x480c8000 0x2000>;
- interrupts = <77>;
- ti,hwmods = "mailbox";
- #mbox-cells = <1>;
- ti,mbox-num-users = <4>;
- ti,mbox-num-fifos = <12>;
- mbox_dsp: mbox-dsp {
- ti,mbox-tx = <3 0 0>;
- ti,mbox-rx = <0 0 0>;
- };
- };
-
- spinbox: spinbox@480ca000 {
- compatible = "ti,omap4-hwspinlock";
- reg = <0x480ca000 0x2000>;
- ti,hwmods = "spinbox";
- #hwlock-cells = <1>;
- };
-
- mdio: mdio@4a100800 {
- compatible = "ti,davinci_mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x4a100800 0x100>;
- ti,hwmods = "davinci_mdio";
- bus_freq = <1000000>;
- phy0: ethernet-phy@0 {
- reg = <1>;
- };
- phy1: ethernet-phy@1 {
- reg = <2>;
- };
- };
-
- eth0: ethernet@4a100000 {
- compatible = "ti,dm816-emac";
- ti,hwmods = "emac0";
- reg = <0x4a100000 0x800
- 0x4a100900 0x3700>;
- clocks = <&sysclk24_ck>;
- syscon = <&scm_conf>;
- ti,davinci-ctrl-reg-offset = <0>;
- ti,davinci-ctrl-mod-reg-offset = <0x900>;
- ti,davinci-ctrl-ram-offset = <0x2000>;
- ti,davinci-ctrl-ram-size = <0x2000>;
- interrupts = <40 41 42 43>;
- phy-handle = <&phy0>;
- };
-
- eth1: ethernet@4a120000 {
- compatible = "ti,dm816-emac";
- ti,hwmods = "emac1";
- reg = <0x4a120000 0x4000>;
- clocks = <&sysclk24_ck>;
- syscon = <&scm_conf>;
- ti,davinci-ctrl-reg-offset = <0>;
- ti,davinci-ctrl-mod-reg-offset = <0x900>;
- ti,davinci-ctrl-ram-offset = <0x2000>;
- ti,davinci-ctrl-ram-size = <0x2000>;
- interrupts = <44 45 46 47>;
- phy-handle = <&phy1>;
- };
-
- sata: sata@4a140000 {
- compatible = "ti,dm816-ahci";
- reg = <0x4a140000 0x10000>;
- interrupts = <16>;
- ti,hwmods = "sata";
- };
-
- mcspi1: spi@48030000 {
- compatible = "ti,omap4-mcspi";
- reg = <0x48030000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <65>;
- ti,spi-num-cs = <4>;
- ti,hwmods = "mcspi1";
- dmas = <&edma 16 0 &edma 17 0
- &edma 18 0 &edma 19 0
- &edma 20 0 &edma 21 0
- &edma 22 0 &edma 23 0>;
- dma-names = "tx0", "rx0", "tx1", "rx1",
- "tx2", "rx2", "tx3", "rx3";
- };
-
- mmc1: mmc@48060000 {
- compatible = "ti,omap4-hsmmc";
- reg = <0x48060000 0x11000>;
- ti,hwmods = "mmc1";
- interrupts = <64>;
- dmas = <&edma 24 0 &edma 25 0>;
- dma-names = "tx", "rx";
- };
-
- timer1_target: target-module@4802e000 {
- compatible = "ti,sysc-omap4-timer", "ti,sysc";
- reg = <0x4802e000 0x4>,
- <0x4802e010 0x4>;
- reg-names = "rev", "sysc";
- ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>,
- <SYSC_IDLE_SMART_WKUP>;
- clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x4802e000 0x1000>;
-
- timer1: timer@0 {
- compatible = "ti,dm816-timer";
- reg = <0 0x1000>;
- interrupts = <67>;
- ti,timer-alwon;
- clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
- clock-names = "fck";
- };
- };
-
- timer2_target: target-module@48040000 {
- compatible = "ti,sysc-omap4-timer", "ti,sysc";
- reg = <0x48040000 0x4>,
- <0x48040010 0x4>;
- reg-names = "rev", "sysc";
- ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>,
- <SYSC_IDLE_SMART_WKUP>;
- clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x48040000 0x1000>;
-
- timer2: timer@0 {
- compatible = "ti,dm816-timer";
- reg = <0 0x1000>;
- interrupts = <68>;
- clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
- clock-names = "fck";
- };
- };
-
- timer3: timer@48042000 {
- compatible = "ti,dm816-timer";
- reg = <0x48042000 0x2000>;
- interrupts = <69>;
- ti,hwmods = "timer3";
- };
-
- timer4: timer@48044000 {
- compatible = "ti,dm816-timer";
- reg = <0x48044000 0x2000>;
- interrupts = <92>;
- ti,hwmods = "timer4";
- ti,timer-pwm;
- };
-
- timer5: timer@48046000 {
- compatible = "ti,dm816-timer";
- reg = <0x48046000 0x2000>;
- interrupts = <93>;
- ti,hwmods = "timer5";
- ti,timer-pwm;
- };
-
- timer6: timer@48048000 {
- compatible = "ti,dm816-timer";
- reg = <0x48048000 0x2000>;
- interrupts = <94>;
- ti,hwmods = "timer6";
- ti,timer-pwm;
- };
-
- timer7: timer@4804a000 {
- compatible = "ti,dm816-timer";
- reg = <0x4804a000 0x2000>;
- interrupts = <95>;
- ti,hwmods = "timer7";
- ti,timer-pwm;
- };
-
- uart1: serial@48020000 {
- compatible = "ti,am3352-uart", "ti,omap3-uart";
- ti,hwmods = "uart1";
- reg = <0x48020000 0x2000>;
- clock-frequency = <48000000>;
- interrupts = <72>;
- dmas = <&edma 26 0 &edma 27 0>;
- dma-names = "tx", "rx";
- };
-
- uart2: serial@48022000 {
- compatible = "ti,am3352-uart", "ti,omap3-uart";
- ti,hwmods = "uart2";
- reg = <0x48022000 0x2000>;
- clock-frequency = <48000000>;
- interrupts = <73>;
- dmas = <&edma 28 0 &edma 29 0>;
- dma-names = "tx", "rx";
- };
-
- uart3: serial@48024000 {
- compatible = "ti,am3352-uart", "ti,omap3-uart";
- ti,hwmods = "uart3";
- reg = <0x48024000 0x2000>;
- clock-frequency = <48000000>;
- interrupts = <74>;
- dmas = <&edma 30 0 &edma 31 0>;
- dma-names = "tx", "rx";
- };
-
- /* NOTE: USB needs a transceiver driver for phys to work */
- usb: usb_otg_hs@47401000 {
- compatible = "ti,am33xx-usb";
- reg = <0x47401000 0x400000>;
- ranges;
- #address-cells = <1>;
- #size-cells = <1>;
- ti,hwmods = "usb_otg_hs";
-
- usb0: usb@47401000 {
- compatible = "ti,musb-dm816";
- reg = <0x47401400 0x400
- 0x47401000 0x200>;
- reg-names = "mc", "control";
- interrupts = <18>;
- interrupt-names = "mc";
- dr_mode = "host";
- interface-type = <0>;
- phys = <&usb_phy0>;
- phy-names = "usb2-phy";
- mentor,multipoint = <1>;
- mentor,num-eps = <16>;
- mentor,ram-bits = <12>;
- mentor,power = <500>;
-
- dmas = <&cppi41dma 0 0 &cppi41dma 1 0
- &cppi41dma 2 0 &cppi41dma 3 0
- &cppi41dma 4 0 &cppi41dma 5 0
- &cppi41dma 6 0 &cppi41dma 7 0
- &cppi41dma 8 0 &cppi41dma 9 0
- &cppi41dma 10 0 &cppi41dma 11 0
- &cppi41dma 12 0 &cppi41dma 13 0
- &cppi41dma 14 0 &cppi41dma 0 1
- &cppi41dma 1 1 &cppi41dma 2 1
- &cppi41dma 3 1 &cppi41dma 4 1
- &cppi41dma 5 1 &cppi41dma 6 1
- &cppi41dma 7 1 &cppi41dma 8 1
- &cppi41dma 9 1 &cppi41dma 10 1
- &cppi41dma 11 1 &cppi41dma 12 1
- &cppi41dma 13 1 &cppi41dma 14 1>;
- dma-names =
- "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
- "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
- "rx14", "rx15",
- "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
- "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
- "tx14", "tx15";
- };
-
- usb1: usb@47401800 {
- compatible = "ti,musb-dm816";
- reg = <0x47401c00 0x400
- 0x47401800 0x200>;
- reg-names = "mc", "control";
- interrupts = <19>;
- interrupt-names = "mc";
- dr_mode = "host";
- interface-type = <0>;
- phys = <&usb_phy1>;
- phy-names = "usb2-phy";
- mentor,multipoint = <1>;
- mentor,num-eps = <16>;
- mentor,ram-bits = <12>;
- mentor,power = <500>;
-
- dmas = <&cppi41dma 15 0 &cppi41dma 16 0
- &cppi41dma 17 0 &cppi41dma 18 0
- &cppi41dma 19 0 &cppi41dma 20 0
- &cppi41dma 21 0 &cppi41dma 22 0
- &cppi41dma 23 0 &cppi41dma 24 0
- &cppi41dma 25 0 &cppi41dma 26 0
- &cppi41dma 27 0 &cppi41dma 28 0
- &cppi41dma 29 0 &cppi41dma 15 1
- &cppi41dma 16 1 &cppi41dma 17 1
- &cppi41dma 18 1 &cppi41dma 19 1
- &cppi41dma 20 1 &cppi41dma 21 1
- &cppi41dma 22 1 &cppi41dma 23 1
- &cppi41dma 24 1 &cppi41dma 25 1
- &cppi41dma 26 1 &cppi41dma 27 1
- &cppi41dma 28 1 &cppi41dma 29 1>;
- dma-names =
- "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
- "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
- "rx14", "rx15",
- "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
- "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
- "tx14", "tx15";
- };
-
- cppi41dma: dma-controller@47402000 {
- compatible = "ti,am3359-cppi41";
- reg = <0x47400000 0x1000
- 0x47402000 0x1000
- 0x47403000 0x1000
- 0x47404000 0x4000>;
- reg-names = "glue", "controller", "scheduler", "queuemgr";
- interrupts = <17>;
- interrupt-names = "glue";
- #dma-cells = <2>;
- /* For backwards compatibility: */
- #dma-channels = <30>;
- dma-channels = <30>;
- #dma-requests = <256>;
- dma-requests = <256>;
- };
- };
-
- wd_timer2: wd_timer@480c2000 {
- compatible = "ti,omap3-wdt";
- ti,hwmods = "wd_timer";
- reg = <0x480c2000 0x1000>;
- interrupts = <0>;
- };
- };
-};
-
-#include "dm816x-clocks.dtsi"
-
-/* Preferred always-on timer for clocksource */
-&timer1_target {
- ti,no-reset-on-init;
- ti,no-idle;
- timer@0 {
- assigned-clocks = <&timer1_fck>;
- assigned-clock-parents = <&sys_clkin_ck>;
- };
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
- ti,no-reset-on-init;
- ti,no-idle;
- timer@0 {
- assigned-clocks = <&timer2_fck>;
- assigned-clock-parents = <&sys_clkin_ck>;
- };
-};
projects / linux-2.6-microblaze.git / blobdiff