Merge tag 'for-5.15/io_uring-2021-09-04' of git://git.kernel.dk/linux-block

[linux-2.6-microblaze.git] / Documentation / networking / ethtool-netlink.rst

diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index 6ea91e4..d9b55b7 100644 (file)
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -212,6 +212,7 @@ Userspace to kernel:
   ``ETHTOOL_MSG_FEC_SET``               set FEC settings
   ``ETHTOOL_MSG_MODULE_EEPROM_GET``     read SFP module EEPROM
   ``ETHTOOL_MSG_STATS_GET``             get standard statistics
+  ``ETHTOOL_MSG_PHC_VCLOCKS_GET``       get PHC virtual clocks info
   ===================================== ================================
 
 Kernel to userspace:
@@ -250,6 +251,7 @@ Kernel to userspace:
   ``ETHTOOL_MSG_FEC_NTF``                  FEC settings
   ``ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY``  read SFP module EEPROM
   ``ETHTOOL_MSG_STATS_GET_REPLY``          standard statistics
+  ``ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY``    PHC virtual clocks info
   ======================================== =================================
 
 ``GET`` requests are sent by userspace applications to retrieve device
@@ -593,6 +595,14 @@ Link extended substates:
                                                                        that is not formally
                                                                        supported, which led to
                                                                        signal integrity issues
+
+  ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST``        The external clock signal for
+                                                                       SerDes is too weak or
+                                                                       unavailable.
+
+  ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS``                        The received signal for
+                                                                       SerDes is too weak because
+                                                                       analog loss of signal.
   =================================================================    =============================
 
   Cable issue substates:
@@ -937,12 +947,25 @@ Kernel response contents:
   ``ETHTOOL_A_COALESCE_TX_USECS_HIGH``         u32     delay (us), high Tx
   ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH``    u32     max packets, high Tx
   ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL``  u32     rate sampling interval
+  ``ETHTOOL_A_COALESCE_USE_CQE_TX``            bool    timer reset mode, Tx
+  ``ETHTOOL_A_COALESCE_USE_CQE_RX``            bool    timer reset mode, Rx
   ===========================================  ======  =======================
 
 Attributes are only included in reply if their value is not zero or the
 corresponding bit in ``ethtool_ops::supported_coalesce_params`` is set (i.e.
 they are declared as supported by driver).
 
+Timer reset mode (``ETHTOOL_A_COALESCE_USE_CQE_TX`` and
+``ETHTOOL_A_COALESCE_USE_CQE_RX``) controls the interaction between packet
+arrival and the various time based delay parameters. By default timers are
+expected to limit the max delay between any packet arrival/departure and a
+corresponding interrupt. In this mode timer should be started by packet
+arrival (sometimes delivery of previous interrupt) and reset when interrupt
+is delivered.
+Setting the appropriate attribute to 1 will enable ``CQE`` mode, where
+each packet event resets the timer. In this mode timer is used to force
+the interrupt if queue goes idle, while busy queues depend on the packet
+limit to trigger interrupts.
 
 COALESCE_SET
 ============
@@ -975,6 +998,8 @@ Request contents:
   ``ETHTOOL_A_COALESCE_TX_USECS_HIGH``         u32     delay (us), high Tx
   ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH``    u32     max packets, high Tx
   ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL``  u32     rate sampling interval
+  ``ETHTOOL_A_COALESCE_USE_CQE_TX``            bool    timer reset mode, Tx
+  ``ETHTOOL_A_COALESCE_USE_CQE_RX``            bool    timer reset mode, Rx
   ===========================================  ======  =======================
 
 Request is rejected if it attributes declared as unsupported by driver (i.e.
@@ -1477,6 +1502,25 @@ Low and high bounds are inclusive, for example:
  etherStatsPkts512to1023Octets 512  1023
  ============================= ==== ====
 
+PHC_VCLOCKS_GET
+===============
+
+Query device PHC virtual clocks information.
+
+Request contents:
+
+  ====================================  ======  ==========================
+  ``ETHTOOL_A_PHC_VCLOCKS_HEADER``      nested  request header
+  ====================================  ======  ==========================
+
+Kernel response contents:
+
+  ====================================  ======  ==========================
+  ``ETHTOOL_A_PHC_VCLOCKS_HEADER``      nested  reply header
+  ``ETHTOOL_A_PHC_VCLOCKS_NUM``         u32     PHC virtual clocks number
+  ``ETHTOOL_A_PHC_VCLOCKS_INDEX``       s32     PHC index array
+  ====================================  ======  ==========================
+
 Request translation
 ===================
 
@@ -1575,4 +1619,5 @@ are netlink only.
   n/a                                 ``ETHTOOL_MSG_CABLE_TEST_ACT``
   n/a                                 ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT``
   n/a                                 ``ETHTOOL_MSG_TUNNEL_INFO_GET``
+  n/a                                 ``ETHTOOL_MSG_PHC_VCLOCKS_GET``
   =================================== =====================================