+++ /dev/null
-STMicroelectronics STM32 Serial Audio Interface (SAI).
-
-The SAI interface (Serial Audio Interface) offers a wide set of audio protocols
-as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97.
-The SAI contains two independent audio sub-blocks. Each sub-block has
-its own clock generator and I/O lines controller.
-
-Required properties:
- - compatible: Should be "st,stm32f4-sai" or "st,stm32h7-sai"
- - reg: Base address and size of SAI common register set.
- - clocks: Must contain phandle and clock specifier pairs for each entry
- in clock-names.
- - clock-names: Must contain "pclk" "x8k" and "x11k"
- "pclk": Clock which feeds the peripheral bus interface.
- Mandatory for "st,stm32h7-sai" compatible.
- Not used for "st,stm32f4-sai" compatible.
- "x8k": SAI parent clock for sampling rates multiple of 8kHz.
- "x11k": SAI parent clock for sampling rates multiple of 11.025kHz.
- - interrupts: cpu DAI interrupt line shared by SAI sub-blocks
-
-Optional properties:
- - resets: Reference to a reset controller asserting the SAI
-
-SAI subnodes:
-Two subnodes corresponding to SAI sub-block instances A et B can be defined.
-Subnode can be omitted for unsused sub-block.
-
-SAI subnodes required properties:
- - compatible: Should be "st,stm32-sai-sub-a" or "st,stm32-sai-sub-b"
- for SAI sub-block A or B respectively.
- - reg: Base address and size of SAI sub-block register set.
- - clocks: Must contain one phandle and clock specifier pair
- for sai_ck which feeds the internal clock generator.
- If the SAI shares a master clock, with another SAI set as MCLK
- clock provider, SAI provider phandle must be specified here.
- - clock-names: Must contain "sai_ck".
- Must also contain "MCLK", if SAI shares a master clock,
- with a SAI set as MCLK clock provider.
- - dmas: see Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
- - dma-names: identifier string for each DMA request line
- "tx": if sai sub-block is configured as playback DAI
- "rx": if sai sub-block is configured as capture DAI
- - pinctrl-names: should contain only value "default"
- - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
-
-SAI subnodes Optional properties:
- - st,sync: specify synchronization mode.
- By default SAI sub-block is in asynchronous mode.
- This property sets SAI sub-block as slave of another SAI sub-block.
- Must contain the phandle and index of the sai sub-block providing
- the synchronization.
- - st,iec60958: support S/PDIF IEC6958 protocol for playback
- IEC60958 protocol is not available for capture.
- By default, custom protocol is assumed, meaning that protocol is
- configured according to protocol defined in related DAI link node,
- such as i2s, left justified, right justified, dsp and pdm protocols.
- Note: ac97 protocol is not supported by SAI driver
- - #clock-cells: should be 0. This property must be present if the SAI device
- is a master clock provider, according to clocks bindings, described in
- Documentation/devicetree/bindings/clock/clock-bindings.txt.
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-graph.txt.
-
-Example:
-sound_card {
- compatible = "audio-graph-card";
- dais = <&sai1b_port>;
-};
-
-sai1: sai1@40015800 {
- compatible = "st,stm32h7-sai";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x40015800 0x400>;
- reg = <0x40015800 0x4>;
- clocks = <&rcc SAI1_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
- clock-names = "pclk", "x8k", "x11k";
- interrupts = <87>;
-
- sai1a: audio-controller@40015804 {
- compatible = "st,stm32-sai-sub-a";
- reg = <0x4 0x1C>;
- clocks = <&rcc SAI1_CK>;
- clock-names = "sai_ck";
- dmas = <&dmamux1 1 87 0x400 0x0>;
- dma-names = "tx";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sai1a>;
-
- sai1b_port: port {
- cpu_endpoint: endpoint {
- remote-endpoint = <&codec_endpoint>;
- format = "i2s";
- };
- };
- };
-};
-
-audio-codec {
- codec_port: port {
- codec_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint>;
- };
- };
-};
projects / linux-2.6-microblaze.git / blobdiff