dt-binding: gce: add binding for gce client reg property

[linux-2.6-microblaze.git] / Documentation / devicetree / bindings / mailbox / mtk-gce.txt

diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
index 1f7f8f2..7b13787 100644 (file)
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
@@ -25,8 +25,16 @@ Required properties:
 Required properties for a client device:
 - mboxes: Client use mailbox to communicate with GCE, it should have this
   property and list of phandle, mailbox specifiers.
-- mediatek,gce-subsys: u32, specify the sub-system id which is corresponding
-  to the register address.
+Optional properties for a client device:
+- mediatek,gce-client-reg: Specify the sub-system id which is corresponding
+  to the register address, it should have this property and list of phandle,
+  sub-system specifiers.
+  <&phandle subsys_number start_offset size>
+  phandle: Label name of a gce node.
+  subsys_number: specify the sub-system id which is corresponding
+                 to the register address.
+  start_offset: the start offset of register address that GCE can access.
+  size: the total size of register address that GCE can access.
 
 Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'
 or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids.
@@ -48,9 +56,9 @@ Example for a client device:
                compatible = "mediatek,mt8173-mmsys";
                mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>,
                         <&gce 1 CMDQ_THR_PRIO_LOWEST 1>;
-               mediatek,gce-subsys = <SUBSYS_1400XXXX>;
                mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
                                CMDQ_EVENT_MUTEX1_STREAM_EOF>;
-
+               mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>,
+                                         <&gce SUBSYS_1401XXXX 0x2000 0x100>;
                ...
        };