description: I2C slave address
clock-mode:
- $ref: /schemas/types.yaml#definitions/uint8
+ $ref: /schemas/types.yaml#/definitions/uint8
description: |
Input clock mode
enum:
GPIO attached to the chip's enable pin
pwr-sel:
- $ref: /schemas/types.yaml#definitions/uint8
+ $ref: /schemas/types.yaml#/definitions/uint8
description: |
LP8501 specific property. Power selection for output channels.
enum:
- 2 # D1~6 with VOUT, D7~9 with VDD
- 3 # D1~9 are connected to VOUT
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
patternProperties:
"(^led@[0-9a-f]$|led)":
type: object
$ref: common.yaml#
properties:
led-cur:
- $ref: /schemas/types.yaml#definitions/uint8
+ $ref: /schemas/types.yaml#/definitions/uint8
description: |
Current setting at each LED channel (mA x10, 0 if LED is not connected)
minimum: 0
maximum: 255
max-cur:
- $ref: /schemas/types.yaml#definitions/uint8
+ $ref: /schemas/types.yaml#/definitions/uint8
description: Maximun current at each LED channel.
reg:
- 8 # LED output D9
chan-name:
- $ref: /schemas/types.yaml#definitions/string
+ $ref: /schemas/types.yaml#/definitions/string
description: name of channel
required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/leds/common.h>
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
- color = <LED_COLOR_ID_MULTI>;
+ color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_STANDBY;
linux,default-trigger = "heartbeat";