Merge branches 'for-next/sysreg', 'for-next/sme', 'for-next/kselftest', 'for-next...

[linux-2.6-microblaze.git] / Documentation / arm64 / booting.rst

diff --git a/Documentation/arm64/booting.rst b/Documentation/arm64/booting.rst
index 96fe10e..ffeccdd 100644 (file)
--- a/Documentation/arm64/booting.rst
+++ b/Documentation/arm64/booting.rst
@@ -223,7 +223,7 @@ Before jumping into the kernel, the following conditions must be met:
   For systems with a GICv3 interrupt controller to be used in v3 mode:
   - If EL3 is present:
 
-      - ICC_SRE_EL3.Enable (bit 3) must be initialiased to 0b1.
+      - ICC_SRE_EL3.Enable (bit 3) must be initialised to 0b1.
       - ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b1.
       - ICC_CTLR_EL3.PMHE (bit 6) must be set to the same value across
         all CPUs the kernel is executing on, and must stay constant
@@ -369,6 +369,16 @@ Before jumping into the kernel, the following conditions must be met:
 
     - HCR_EL2.ATA (bit 56) must be initialised to 0b1.
 
+  For CPUs with the Scalable Matrix Extension version 2 (FEAT_SME2):
+
+  - If EL3 is present:
+
+    - SMCR_EL3.EZT0 (bit 30) must be initialised to 0b1.
+
+ - If the kernel is entered at EL1 and EL2 is present:
+
+    - SMCR_EL2.EZT0 (bit 30) must be initialised to 0b1.
+
 The requirements described above for CPU mode, caches, MMUs, architected
 timers, coherency and system registers apply to all CPUs.  All CPUs must
 enter the kernel in the same exception level.  Where the values documented